gupo 20 | 55 | 70 | 150 | 200 -...
Post on 25-Aug-2018
216 Views
Preview:
TRANSCRIPT
Oil burner
Oil burner Series R | GL | M | GUPO
Enertech GmbHGiersch / Electro_OilAdjutantenkamp 1858675 HemerPhone +49 (0) 2372/965-0Telefax +49 (0)2372/61240info@giersch.de | www.giersch.de
Subject to technical changes / 08.14 / Article number 72-10-58101-GBPrinted in Germany • Enertech GmbH
The best address for your heating needs
GUPO 20 | 55 | 70 | 150 | 200 Burner output: 34 - 208 kW Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Mode of operation: single-stage Motor: 90 | 180 W | 250 W
The universal oil burner is ideal for numerous different types of oil. No conversion required. Thanks to compressed air atomisa-tion technology. A small oil pump is used to feed oil into the bur-ner tank. A float switch keeps the oil at the correct level inside the tank. An electric oil heater is integrated in the burner tank.The universal oil burners are connected to an external com-pressed air system. Compressed air passes through the com-pressed-air atomising nozzle, draws in the oil from the fuel tank by the Venturi principle and atomises it into microscopically small droplets. Depending on capacity, the burner is fitted with one, two or three oil nozzles. The combustion air is comprised of compressed air as primary air and blower air as secondary air.The finely atomised oil mist mixes with the air at the oilfusor air and combusts. The blower air flow is set manually at the air damper.And if your type of oil is not available, you can use standard EL fuel oil. Simply change the air supply and turn the thermostat for tank heating to „no heating“.
GUPO 20 | 55 | 70 | 150 | 200
GUPO 20
GUPO 55
GUPO 100
GUPO 200
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Fuel oil
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Fuel oil
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Fuel oil
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Fuel oil
Universal oil burner GUPO
Series GL / GB
GL10-BiNox | GL20-1/2-LN | GB 3000
Series MSeries R
R1 | R20 | R30
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
R30 Burner output:
Mode of operation: single-stage with
start-up relief
95 - 273 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 250 W
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
R1 Burner output:
Mode of operation: single-stage
14 - 53 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 90 W
R20 Burner output:
Mode of operation: single-stage
33 - 166 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 180 W
Fully automatic oil burner tested and approved in accordance with DIN EN 267 for fuel oil EL compliant with DIN 51 603 with oil preheating (version -V) and elctromotively controlled air exclusion (version -L) and low-emission combustion (version -BI Nox).Equipped for two-stage output control (version -Z).Burner tube adjustable to combustion chamber depth. Burner assembly rotates around the burner tube axis. The burner can be mounted both horizontally or vertically.Burner housing with baseplate and burner hood, integrated sound insulation and sliding flange, AC motor, high performance fan, mixing device and burner pipe, ignition transformer with twin electrode, two 1200 mm metal hoses and burner fastening material with flange seal.Burner with control unit wired for connection and hydraulically, electrically and safety tested, 7-pin or 11-pin connection (version -Z) compliant with DIN 479.
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
GB 3000 Burner output:
Mode of operation:
single-stage
15 - 50 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 90 W
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
GL10-BiNox Burner output:
Mode of operation:
single-stage
16 - 85 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 90 W
GL20-1/2-LN Burner output:
Mode of operation:
two-stage
44 - 216 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 220 - 240 V
Motor: 250 W / 370 W
Fully automatic low-emission blue-flame oil burner GB tested and approved in accordance with DIN EN 267 for fuel oil EL compliant with DIN 51 603 with oil preheating and nozzle system for standard oil nozzles.
Blue-flame burner with adjustable recirculation for NOx emissions < 120 mg/kWh in accordance with DIN 267. Burner tube is adjustable to combustion chamber depth. The burner can be mounted both horizontally or vertically.
Burner housing with baseplate and burner hood, integrated sound insulation and sliding flange, AC motor, high performance fan, mixing device, burner pipe, flame guard, ignition transfor-mer with twin electrodes, two 1200 mm metal hoses and burner fastening material with flange seal.
M10-LN | M2-LN | M3-LN
M3-LN Burner output:
Mode of operation:
two-stage
351 - 918 kW
Electrical connection 10 A: 3/N/PE ~ 50 Hz 400 V
Motor: 3.0 kW
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ]
M10-LN Burner output:
Mode of operation:
two-stage
107 - 302 kW
Electrical connection 10 A: 1/N/PE ~ 50 Hz 230 V
Motor: 370 / 750 W
M2-LN Burner output:
Mode of operation:
two-stage
171 - 534 kW
Electrical connection 10 A: 3/N/PE ~ 50 Hz 400 V
Motor: 1.1 kW
Fully automatic oil burners in monoblock design equipped for single-stage output control (version -AE) or for two-stage output control with electromotively controlled air exclusion (version -Z-L), tested and approved in accordance with DIN EN 267 for fuel oil EL compliant with DIN 51603.Silent, pressure-stable fan casting with sliding de-vice for an easy and timesaving service. Burner housing with baseplate and burner hood, integrated silencer, AC motor, inner assembly with one or two nozzle system, two 1500 mm metal hoses and burner fastening material with flange seal.Burner with control unit wired for connection and hydraulically, electrically and safety tested, 7-pin or 11-pin connection compliant with DIN 4791.
100 150 200 250
9,02 19,414,7
5
4
3
2
1
0
M1 0 . 1 -Z-L- LN
10,2 25,4616,8
M1 0 . 2 -Z-L- LN
100 150 200 250 300
0
2
4
6
Burner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Bu rner ou tpu t [ kW]
Fu
rna
ce r
esi
sta
nce
[m
ba
r]
Th roughpu t [ kg /h ] Throughpu t [ kg /h ]
top related