hanootd ls - amazon s3€¦ · tubes / pipes Ø mm weight g deburring head max. Ø mm deburring...
Post on 15-Oct-2020
1 Views
Preview:
TRANSCRIPT
MILWAUKEE®
HAND TOOLSMADE WITH CORROSION RESISTANT STEELINNOVATIVE USER FRIENDLY DESIGNMULTI FUNCTION TOOLS
2014 / 2015
2
FASTBACK FLIP UTILITY KNIFEn One handed blade opening: user can flip open the blade with one hand for easy activation.
n Integrated gut hook: allows users to make cuts without exposing the blade.
n Tool free blade change: less down time in the field for blade changes.
n Wire stripper: eliminates the need to look for another tool in user’s bag.
n Thin body design: tool is easily stored in user’s pocket.
n Belt clip: for easy storage.
UTILITY KNIFE BLADESn Iron carbide deposited metal for longer lifetime.
n Optimised cutting angle geometry for sharpness.
n Extra ground cutting edge for cleaner cuts.
n Blades are protected and easily accessible from storage box.
KNIVES
DESCRIPTION/APPLICATION Id. No.
1. Fastback knife 48221901
2. Fastback knife with blade storage 48221902
1
1 2 3
2
3
www.milwaukeetool.co.uk
UTILITY KNIFE BLADESn Iron carbide deposited metal for longer lifetime.
n Optimised cutting angle geometry for sharpness.
n Extra ground cutting edge for cleaner cuts.
n Blades are protected and easily accessible from storage box.
SLIDING UTILITY KNIFEn Side slide blade activation: reduces the risk of exposing the
blade accidentally. n Wire stripper: eliminates the need for another tool in the users bag.
n Tool free blade change: saves time changing blades.
n Blade storage: magnetic holder for 5 blades.
n Heavy duty: full metal body with rubber overmould for increased comfort and reduced hand slippage.
SELF RETRACTING SAFETY KNIFEn Self-retract mechanism: retracts blade when the button is released.
n Two blade positions allows user to control cutting depth.
n Blade storage holds up to 5 blades conveniently inside the handle.
n Tool-free blade change: saves time changing blades.
Thumb-screw mechanism allows user to change the blade
quickly and without any extra tools.
n Heavy duty: durable full metal body.
n Wire stripper: eliminates the need to look for another tool in
user’s bag. Cut up the wire up to Ø 5 mm².
KNIVES
DESCRIPTION/APPLICATION Id. No.
1. Sliding utility knife 48221910
2. Self retracting safety knife 48221915
DESCRIPTION/APPLICATION Total length mm Total height mm Id. No.
1. General purpose utility knife blades 62 19 48221950
2. Hook utility knife blades 62 19 48221952
3. Carton utility knife blades (rounded) 62 19 48221934
1
2
4
SNAP KNIFE n Metal lock for maximum durability and longer lifetime.
n Lock with a speed thread that allows faster blade adjustment.
n Auto-lock slide for faster blade adjustment.
n Snap-off cap pocket clip snaps off blade segments.
n Overmolded handle offers a slip resistant grip and is an acetone resistant.
n Iron carbide blade for longer lifetime, increased sharpness and clean cut finish.
ACCESSORIES n Robust re-usable storage dispenser with easy access to blades.
n Optimized cutting angle geometry for sharpness and improved cutting precision.
n Iron carbide metal for longer life.
n Precise ground cutting edges for cleaner cuts.
KNIVES
DESCRIPTION/APPLICATION Blade width mm Blade points Id. No.
1. Snap knife 9 13 48221960
2. Snap knife 18 8 48221961
3. Snap knife 25 7 48221962
DESCRIPTION/APPLICATION Blade width mm Blade points Id. No.
1. Snap blades 9 13 48229109
2. Snap blades 18 8 48229118
3. Snap blades 25 7 48229125
1
1 2 3
2 3
5
www.milwaukeetool.co.uk
RASPING JAB SAW n 150 mm plaster / drywall blade: extra strong thicker blade making
it more resistant for plunge cuts.
n Coated for corrosion protection.
n Rubber overmould: increased comfort and reduced hand slippage.
n Built in rasping holes: allows user to rapidly expand holes or smooth rough edges.
JOBSITE SCISSORS n Iron carbide cutting edge for maximum durability. Longer lifetime vs. stainless steel. n Chrome plated blades for maximum rust protection. n All metal core: full metal handle construction to protect from drops and handle breakages. n Bolt lock technology prevents blades from loosening to ensure precision cutting. n Large handle loops for use with gloves.
n Index finger groove for more comfort.
n Laser etched ruler markings on the blade allows to measure and cut in 1 go.
KNIVES
DESCRIPTION/APPLICATION Total length mm Blade length mm Id. No.
1. Jobsite offset scissors 240 115 48224043
2. Jobsite straight scissors 230 95 48224044
DESCRIPTION/APPLICATION Id. No.
Rasping jab saw 48220304
1
2
Available January
2015
6
METAL SNIPSn Thumb and forefinger slots for increased
comfort and less fatigue.
n Allows user to push through sheet metal with ease with less risk of cutting oneself.
n Serrated cutting edges prevent slippage when cutting.
n Less hand fatigue when cutting thicker materials.
n Design with compound leverage action.
n Torsion spring opens jaws automatic during cutting for faster cutting action and less fatigue work.
n Chrome plated rust protected forged blades for increased lifetime.
n Extra hardened to 65 HRC.
n One hand locking mechanism.
n Flush slimline design for non-snagging in material.
n Triple cutting direction identification – on the head, handle and by colour coded handle.
n Ergonomic and durable overmoulded grips add comfort and last longer.
PLASTIC CUTTER
n Cuts PEX, PB, MDP, PE, plastic electrical conduits, pneumatic pipe, plastic overflow pipe, rubber hoses, silicon hoses up to Ø 25 mm.
n V-shaped blade allows quick and straight cuts; prevents crushing of material.
n Replaceable stainless steel blade.
n Robust construction – metal core from the head to the handles for resistant head.
n Grooves on the head allows stripping of couplings.
n One handed locking mechanism, tool remains closed while in pouch, spring loaded but easy opening.
n Ergonomic and durable overmoulded grips add comfort and last longer.
SNIPS
1 3
Cuttingdirection
Total length (mm)
Edge length(mm)
Steel / Aluminium /Copper max thickness
(mm)Stainless steel thickness (mm) Id. No.DESCRIPTION / APPLICATION
1. Aviation snips: for short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
Straight (yellow) 260 31 1.0 0.6 48224030
Right (green) 260 31 1.0 0.6 48224020
Left (red) 260 31 1.0 0.6 48224010
2. Offset snips: for long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
Straight (yellow) 260 37 1.0 0.6 48224032
Right (green) 260 30 1.0 0.6 48224022
Left (red) 260 30 1.0 0.6 48224012
3. Extra long aviation snips: For longer and straighter cuts in one go
Straight (yellow) 310 76 1.0 0.6 48224037
Left (offset) 290 63 1.0 0.6 48224038
2
7
www.milwaukeetool.co.uk
PLASTIC CUTTER
PLIERS6 IN 1 TOOL n Pliers: specially suitable for gripping, bending
and adjusting in resctricted areas.
n Wire stripper: strips 3 sizes of wire: 0,5 – 0,75 / 1,5 / 2,5 mm². n Wire cutter: cuts wire up to 2.8 mm. n Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools.
n Nail puller. n Loop maker: built in loop maker function for wire up to 6.6 mm² / Ø 2.9 mm. n Crosswise serrated jaws for better grip and excellent control.
n Laser hardened durable cutting edges. Extra hardened to 64 HRC.
n Made from chrome vanadium for best durability and good rust protection.
n Ergonomic and durable overmoulded grips add comfort and last longer.
n Bolt cutter: cuts M3 and M4 size threaded bolts (Combination pliers only).
n Nail puller (Long nose pliers only).
DESCRIPTION / APPLICATION
Cutting capacities tubes/pipes (Ø mm) Id. No.
Plastic cutter 25 48224200
Replaceable blade – 48224201
1 2
DESCRIPTION / APPLICATION
Stripping capacities (mm2)
Soft wire (mm)
Cable (Ø mm)
Total length (mm)
Jawthickness
(mm)Weight
(g)
Deburring max (Ø mm) Id. No.
1. Combination 6 in 1 pliers with bolt cutter
0.5 – 0.75 / 1.5 / 2.5 4.6 13.0 200 13.5 500 25 48229068
2. Longnose 6 in 1 pliers with nail puller
0.5–0.75/1.0/1.5/2.5/4.0 2.5 6.0 190 4 270 25 48229069
8
PLIERSHEAVY DUTY LINEMAN’S PLIERSn For universal gripping, cutting applications.
n High leverage design: long handles for maximum cutting power and leverage.
n Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools.
n Nail puller: powerful gripping and high leverage.
n Laser hardened durable cutting edges: cuts wire, bolts, screws and nails.
Extra hardened jaws to 64 HRC.
n Serrated gripping zone for strong gripping and pulling.
n Made from chrome vanadium steel for best durability and good rust protection.
n Ergonomic and durable overmoulded grips add comfort and last longer.
DIAGONAL PLIERSn For all around cutting use. n Tip protection: tips are off set ground to protect cutting edges from damage when dropped.
n High leverage design: long handles for maximum cutting power and leverage.
n Deburrer: deburring ribs on head for up to 25 mm pipe. No need for extra tools.
n 15º offset head allows flush cutting, can be used as a nail puller for easier and
quicker prying and pulling.
n Laser hardened durable cutting edges. Extra hardened to 64 HRC. Cuts wire,
bolts, screws and nails.
n Made from forged alloy chrome vanadium steel for best durability and good rust protection.
n Ergonomic and durable overmoulded grips add comfort and last longer.
DESCRIPTION / APPLICATION
Medium / hard wire mm Soft wire mm
Total length mm Weight g Deburring mm Id. No.
Heavy duty lineman’s pliers
3.0 4.6 250 500 25 48223309
DESCRIPTION / APPLICATION
Total length (mm)
Medium / hard wire(Ø mm)
Softwire
(Ø mm)Jaw length
(mm)Weight
(g) Id. No.
1. Diagonal pliers 160 2.5 4.0 22 230 48224106
2. Diagonal pliers 180 3.0 4.0 26 290 482241071
2
9
www.milwaukeetool.co.uk
PLIERSQUICK ADJUST WATER PUMP PLIERSn For gripping, fastening and holding work pieces.
n One hand push button adjustment for fast and firm grip.
n Fine scale adjustment positions for precise grip. Less downtime and more efficiency.
n Self locking button for fast and firm adjustment.
n V-groove jaws with profile for firmer grip, more precise fit and reduced slipping. Special teeth hardening 60 HRC.
n Made from nickel and chrome forged alloy steel for best durability and good rust protection.
n Ergonomic and durable overmoulded grips add comfort and last longer.
n Deburring head and handle design. No need for extra tools.
n Available in 3 lengths for optimum leverage.
DESCRIPTION / APPLICATION
Total length
mm
Total length inch
Nut size mm
AF (Across flats)
Tubes / pipes Ø mm
Weight g
Deburring head max. Ø mm
Deburring handles
max. Ø mm Id. No.
1. Quick adjust water pump pliers
200 8 30 32 270 38 25 48223108
2. Quick adjust water pump pliers
250 10 36 42 450 51 25 48223110
3. Quick adjust water pump pliers
300 12 50 60 800 70 25 48223112
1
2
3
10
TORQUE LOCK™ GRIPS n Range: for gripping and clamping material. Ideal for plumbing and general pipe work.
n TORQUE LOCK™: faster setup and more force for locking tools.
n Hang holen Lever release design: traditional release lever for jobsite convenience.
n Hardened jaws: better grip force on jobsite material.
n Rust protection: chrome plated tool increases life by reducing corrosion.
GRIPS AND CLAMPS
DESCRIPTION/APPLICATION Total length mm
Total length (inch) Jaw Type
Jaw Capacity flat (mm) Jaw Capacity Pipe Id. No.
1. Torque LockTM grips 250 10 Curved - 51 48223420
2. Torque LockTM grips 250 10 Flat 30 - 48223510
3. Torque LockTM grips 150 6 Flat long nose 61 - 48223406
1 2 3
11
www.milwaukeetool.co.uk
TORQUE LOCK™ CLAMPS n TORQUE LOCK™: faster set up and easy release
when clamping flat and round materials for welding. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
n Hardened jaws: better grip force on jobsite material.
n Lever release design: traditional release lever for jobsite convenience.
n Rust protection: chrome plated tool increases life by reducing corrosion.
DESCRIPTION/APPLICATION
Total length (mm)
Total length (inch)
Jaw Type Jaw Capacity (mm) Id. No.
1. Torque LockTM clamps 280 11 Swivel pads 100 48223521
2. Torque LockTM clamps 250 11 Regular pointed 90 48223531
STOP LOCK™ CLAMPS n STOP LOCK™: single handed clamp. Maximum holding force in one pressing.
n Overmould grip: maximum grip for comfort and performance
n Optimised pad design: non marking swivel pads for clamping
on a variety of jobsite surfaces.
n Lever release design: traditional release lever for jobsite convenience.
1
1
2
2
DESCRIPTION/APPLICATION
Total length (mm)
Total length (inch)
Jaw Capacity (mm) Id. No.
1. Stop LockTM clamps 200 8 50 48223022
2. Stop LockTM clamps 240 9.5 100 48223004
Available January
2015
12
METRIC & IMPERIAL MAGNETIC TAPE MEASURESn Overmould gripping area for extra comfort and durability
n Non reflective blade coating makes the tape anti-glare and easier to read in bright sunlight
n Double sided nylon bond blade protection for extreme tape durability against dust, dirt, debris and water
n Premium quality 27mm blade width
TAPE MEASURES
DESCRIPTION / APPLICATION Id. No.
5m metric magnetic tape measure 48225305
5m/16ft metric & imperial magnetic tape measure 48225216
8m metric magnetic tape measure 48225308
8m/26ft metric & imperial magnetic tape measure 48225225
10m metric magnetic tape measure 48225411
10m/33ft metric & imperial magnetic tape measure 48225233
Available January
2015
13
www.milwaukeetool.co.uk
METRIC & IMPERIAL MAGNETIC TAPE MEASURESn Overmould gripping area for extra comfort and durability
n Non reflective blade coating makes the tape anti-glare and easier to read in bright sunlight
n Double sided nylon bond blade protection for extreme tape durability against dust, dirt, debris and water
n Premium quality 27mm blade width
Dual magnets One magnet holds the hook in front; a second magnet prevents roll off on the material as e.g. on steel studs, pipes
2-Sided scale printing Horizontal measuring scale on the front side; vertical measuring scale on back side for increased readability
Finger stop For comfortable hold and finger protection when the blade retracts
5-Point reinforced frame For job site durability
Wire belt clip Clips on easily without fraying and tearing clothing
Architect scale Is integrated for easy calculating of scaled drawings (ISO 5455). Enables to measure distances and calculate material demand directly on construction site
5m & 8m tape measures: 1:20 and 1:50 scales, 5m/16ft & 8m/25ft tape measures: 1/8" to 1' and 1/4" to 1' scales
Class II accuracy
14
INKZALL™ JOBSITE MARKERS FEATURE CLOG RESISTANT TIPS AND THE ABILITY TO WRITE THROUGH DUSTY, WET OR OILY SURFACES.
n Durable acrylic nib is ideal for rough surfaces as OSB, concrete. Also suitable for marking on wood, metal, plastic and ceramics.
n Acrylic nib stays sharp longer, doesn’t mushroom or push back under pressure.
n Ink dries quickly to reduce smearing. However the INKZALL™ markers don’t dry out quickly when the cap is left off.
n Anti-roll body design for better grip on smooth surfaces.
n Construction helmet clip: the INKZALL™ markers can be clipped to the helmet, trousers, overalls, etc.
n Lanyard hole, e.g. to attach the INKZALL™ markers to the belt; stylus INKZALL™ marker to a touch screen device.
n Non-toxic ink, ASTM D 4236 certification.
n INKZALL™ fine tip with stylus – the first marker with the stylus function on the market!
INKZALL™ MARKER PENS QUICK DRY INKDRIES IN SECONDS
13
4
2
DESCRIPTION/APPLICATION Tip Id. No.
1. Fine tip* 1mm 48223100
2. Fine tip* with stylus 1mm 48223101
3. Chisel tip 1-4.8mm 48223103
4. Coloured markers: pack of four fine tip markers. Blue, red, green and black
1mm 48223106
Available February
2015
15
www.milwaukeetool.co.uk
TOOL BOXES AND BAGS26” JOBSITE TOOLBOX n Impact resistant construction
n Buttressed hinges - for jobsite durability.
n Protected recessed latches
n Reinforced cornersn Integrated weather seal - protects contents
from rain and jobsite debris.
n Clamping cut groove - clamps small diameter materials while cutting.
n overmolded wide grip handle - allows for ergonomic carrying.
n Pass through side grips - allow easy access and handling from all angles.
n Integrated screw mounting bosses - allow for unlimited customization.
n Corner pocket storage - keeps tools organized and easily accessible.
n Space for long and bulky tools
n Indexing square - allow easy and secure stacking.
TOOLBAGS n Provides extra storage for
job site accessories.
n Shoulder strap or dual handle strap for easy carrying.
n Durable zipper closure.
1
2
DESCRIPTION/APPLICATION Length (in) Height (in) Weight (lbs)
Jobsite toolbox 26 12.25 11.5
DESCRIPTION/APPLICATION Length (mm) Height (mm) Width (mm) Id. No.
Milwaukee 12“ toolbag 305 200 150 4931416739
Milwaukee 24“ toolbag 320 320 650 4931431552
Available February
2015
16
MILWAUKEE TOOLGround Floor, Unit 3 Globeside Business Park, Fieldhouse Lane, Marlow, Bucks SL7 1 HZ
Tel: +44(0) 1628 894400 Fax: +44 (0) 1628 894401
All data incl. service and warranty conditions as well as product range are subject to change without notice.
Pictures are not binding. No liability for printing errors or mistakes. Copyright 2014 - Milwaukee Electric Tool
TO DOWNLOAD THESE CATALOGUES PLEASE VISIT:
www.milwaukeetool.co.uk
ALSO AVAILABLE
top related