high mast series - acuitybrands.com€¦ · 6 holophane® | infrastructure | high mast series...
Post on 29-Jul-2018
238 Views
Preview:
TRANSCRIPT
High Mast SeriesHMAO | HMSC
2 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
High Mast Series
HOLOPHANE HIGH MAST LIGHTING SERIES PROVIDES SUPERIOR
BENEFITS FOR ILLUMINATING LARGE AREAS. THE OPTIMIZED
LIGHT CONTROL PROVIDED BY THE HMAO AND HMSCLUMINAIRES CAN BE UTILIZED IN A VARIETY OF APPLICATIONS.WHEN INCORPORATED WITH HOLOPHANE LOWERING DEVICES,THE SYSTEM PROVIDES FOR FEWER LUMINAIRES AND POLES
RESULTING IN REDUCED ENERGY REQUIREMENTS AND
MAINTENANCE COSTS OVER THE LIFE OF THE INSTALLATION.
HMAO™ Series
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 3
| OUTDOOR LIGHTING| OUTDOOR LIGHTING
Features and Benefits
O Precise reflector design and highly efficientlighting qualifies for IESNA Cutoff and FullCutoff classifications
O Superior optical performance and maximizedpole spacing reduces energy costs
O Open ventilated design minimizes dirtdepreciation
O Unitized quick disconnect assembly andtool-free lamp replacement allows for easeof maintenance
Typical Applications
O Infrastructure• Highways and Roadways• Interchanges• Toll Plazas
O Large Area• Ports• Rail and Container Yards• Parking Areas• Truck Stops
O Outdoor Facilities• Correctional Facilities• Airports• Security Lighting• Sports Lighting
HMSC® Series
4 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
HMAO™ Series
THE HIGH MAST ADVANCED OPTIX (HMAO) SERIES
OF LUMINAIRES UTILIZE A SUPERIOR OPTICAL SYSTEM
THAT PROVIDES A VARIETY OF LIGHTING DISTRIBUTIONS,INCLUDING IESNA CUTOFF AND FULL CUTOFF
VERSIONS. THIS LUMINAIRE IS AN EFFECTIVE LIGHTING
SOLUTION IN AREAS WHERE LIGHT TRESPASS AND LIGHT
POLLUTION ARE A CONCERN TO THE ENVIRONMENT.
Ballast Assembly andDie-cast AluminumHousing
Weathertight Design
Reflective Specular PanelsRefractor Assembly
Weather ShieldSealed Optical Assembly
Spun Aluminum Cover
Weathertight Design for UL wet location listed.
Adjustable Slipfitter Bracketentry is designed for 51mm(2") nominal pipe and permitsa vertical positioningadjustment of ±3°.
Terminal Block provides forpositive lead connection and ispre-wired to the quickdisconnect.
Spun AluminumCover hermeticallysealed for protectionfrom contaminants
Reflector/Refractor Opticsavailable in a variety of lightingdistributions and cutoff options
Lamp Support anda Variety of LampPositions
Terminal Blockand SlipfitterBracket
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 5
| OUTDOOR LIGHTING
Quick Disconnect is providedfor fast installation andremoval
Ballast Assemblyis UL listed for40°C ambient and providesextended ballastand capacitor life.
6 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
Applications
THE HMAO SERIES IS DESIGNED FOR LIGHTING LARGE
AREAS SUCH AS ROADWAYS, PORT FACILITIES, AIRPORTS,WATER TREATMENT PLANTS, PARKING LOTS, RAIL YARDS
AND STORAGE AREAS. THE HIGH PERFORMANCE OPTICAL
ASSEMBLY PROVIDES HIGH VERTICAL ILLUMINATION WHICH
IMPROVES VISIBILITY AND SAFETY AS WELL AS REDUCING
THE NUMBER OF POLES REQUIRED IN ALL APPLICATIONS.
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 7
| OUTDOOR LIGHTING
8 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
Dimensional Details
DistributionsHousing The housing shall be die cast aluminum, and finished with polyester powder paint. The bracketarm clamp shall attach to a 51mm (2") nominal schedule 40 pipe and allow for ±3° adjustment forleveling the luminaire. A stainless steel lamp clamp lined with woven glass cloth shall be attachedto the reflector housing assembly for standard 1000 watt HID lamps. The fixture shall pass avibration fatigue test per ANSI standards for Roadway Lighting Equipment - Luminaire Vibration.
Ballast
The ballasts shall be copper wound with power factor 90%, and have a published ballast factor of1 to ensure full output of the lamp. All ballast components shall be completely removable as aunitized quick disconnect assembly for maintenance. A terminal block shall be provided to simplifywiring and provide positive electrical connections. A protected starter, if specified, shall sense aninoperative or missing HPS lamp and automatically shut down to prevent runaway operation,shortened life, and damage to secondary ballast windings.
Optical Assembly
The optical assembly consists of highly specular enhanced aluminum panels hermetically sealedbetween a spun aluminum cover, an open ventilated borosilicate glass piece, and/or a prismaticrefractor or an internal reflector system. The exposed smooth glass inner surface shall becontinuously cleaned by the chimney effect of flow through air and subject to no permanentdeterioration. The lamp shall be operated in the vertical position for maximum life and lumenmaintenance. There shall be no glass bottom enclosure to scatter light above the horizon, tocollect dirt or to reduce luminaire efficiency. The luminaire dirt depreciation shall be less than 5%(LDD 0.95).
UL Listing
Fixture shall be UL listed for wet locations, UL/CUL listed for 40°C.
HMAO S Optic
HMAO L Optic
Ordering Information
Performance Specifications
J OpticsMaximum Weight: 37.5 kg (79 lbs)Maximum E.P.A.: 1.34 sq. ft.
S OpticsMaximum Weight: 34.5 kg (76 lbs)Maximum E.P.A.: 1.34 sq. ft.
L OpticsMaximum Weight: 41.7 kg (92 lbs)Maximum E.P.A.: 1.78 sq. ft.
R OpticsMaximum Weight: 39.2 kg (88 lbs)Maximum E.P.A.: 1.72 sq. ft.
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 9
| OUTDOOR LIGHTING
R6
OPTIONS
R
R4
OPTICS
JLRS
LAMP7
ACCESSORIES
LAMP
75
BEAM ANGLE
79
STEP 3: VOLTAGE
STEP 5: BEAM ANGLE
STEP 1: LUMINAIRE STEP 6: OPTIONS
STEP 8: ACCESSORIES
Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected)
Preferred Selections:
Most Frequently Ordered Catalog Numbers
Factory Installed.
Ships Separately.
HMAO1
LUMINAIRE
HMAO
400HP2
WATTAGE
400HPC10HP
483
VOLTAGE
48MT
STEP 2: SOURCE AND WATTAGE
STEP 4: OPTICS
HMAO High Mast Advanced OptixSeries
J Asymmetric reflectorL Asymmetric refractorR Symmetric refractorS Symmetric reflector
7 Low9 HighL Optic Only0 2 Non cutoff1 3 Low, semi-cutoff2 4 High, semi-cutoff1 Available with C10HP, CP1HP and C10MP
wattage only
2 Available with 400HP, 750HP, CP1HP andC10MP wattage only
3 Available with 750HP wattage only
08 1 208V12 120V20 208V24 240V27 277V34 347V40 1 240V48 480VMT 2 Multi-voltage1 Isolated secondary2 120, 208, 240, and 277V only.
Not available with 40RHP or 750HP
F1 Single fuse assembly for 120,240, 277 or 347V
F2 Double fuse assembly for 208,240 or 480V
LAMP Appropriate HID lamp supplied PS-100 Replacement protected starter
for wattage 400 or morePS-1000 Replacement protected starter
for wattage 1000SHIELDSSD-395-90 1 90° shieldSD-395-120 1 120° shieldSD-395-180 1 180° shield1 Available with S optic only
FD1 1 Single fuse disconnect assemblyFD2 2 Double fuse disconnect assemblyPS Protected starter for HPSR 3 Photocontrol receptacle (NEMA
type)1 For 120, 240, 277 and 347V2 For 208, 240 and 480V3 Not available with MT voltage
HIGH PRESSURE SODIUMMogul Base400HP 1 400W HPS40RHP 1 400W HPS, mag reg750HP 1 750W HPSC10HP 1, 3 1000W HPSCP1HP 1, 3 1000W HPS, compact lamp
METAL HALIDEMogul Base400MP 2 400W MH, protected400PP 2 400W MH, pulse start,protectedC10MP 1000W MH, protected1 Mogul base lamp2 Protected sockets, open fixture rated lamps
only3 105°C supply wire required on all 1000W
HPS units
J S
L R
10 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
HMSC® Cutoff Series
THE HIGH MAST CUTOFF (HMSC) LUMINAIRE PRODUCES
SEVEN, HIGHLY EFFECTIVE LIGHT PATTERNS THAT ENABLE FEWER
POLES TO BE USED WHILE PROVIDING A LIGHTING SOLUTION
THAT RESEMBLES NATURAL DAYLIGHT FOR INCREASED VISIBILITY.THIS LUMINAIRE IN COMBINATION WITH A HOLOPHANE LOWERING
DEVICE SYSTEM WITH THE TOOL-FREE LAMP REPLACEMENT AND
TERMINAL BLOCK WIRING FROM GROUND LEVEL, ALL RESULTING
IN A LOWER COST MAINTENANCE OVER THE LIFE OF PRODUCT.
Ballast Assembly andDie-cast AluminumHousing
Lamp Support
Refractor Assembly
Spun Aluminum Cover
Terminal Block
Weathertight Design
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 11
| OUTDOOR LIGHTING
Variety of Lamp Positions
Reflector/Refractor Opticsavailable in a variety of lighting distributions and cutoff options
Weathertight Design for UL wet location listed.
Adjustable Slipfitter Bracketentry is designed for 51mm(2") nominal pipe and permitsa vertical positioningadjustment of ±3°.
Terminal Block provides forpositive lead connection andis pre-wired to the quickdisconnect.
Quick Disconnect isprovided for fastinstallation and removal
Ballast Assemblyis UL listed for40°C ambient and providesextended ballastand capacitor life.
12 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
Applications
THE HMSC LUMINAIRES PROVIDE SUPERIOR BENEFITS FOR
LIGHTING ROADWAYS, INTERCHANGES AND A VARIETY OF LARGE
AREAS. MOTORISTS NEED THE FULL PANORAMIC VIEW PROVIDED
BY OUR HIGH MAST LUMINAIRES TO SAFELY ACCESS DRIVING
CONDITIONS. THE UNIFORMITY OF VERTICAL AND HORIZONTAL
LIGHTING ENHANCES NIGHTTIME SECURITY AT PRISONS AND
HELPS PROTECT VITAL EQUIPMENT IN FREIGHT TERMINALS, AND RAIL YARDS.
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 13
| OUTDOOR LIGHTING
14 HOLOPHANE® | INFRASTRUCTURE | High Mast Series
HOLOPHANE®
Dimensional Details
Ballast HousingThe ballast and lamp housings shall be die cast of low copper content aluminum alloy. Thecastings shall be subjected to a 7-stage pretreatment cleaning prior to being finished withan electrostatically applied and baked on polyester powder coat paint. The bracket armclamp shall attach to a 51mm (2”) nominal pipe and allow for +/-3° adjustment for levelingthe luminaire. A porcelain-enclosed socket with a nickel-plated grip screw shell provideslamp support. A stainless steel lamp clamp lined with woven glass cloth shall be providedfor standard 1000 watt HID lamps. The fixture shall pass a vibration fatigue test simulating aminimum 1-g peak acceleration.
BallastThe ballast shall be copper wound with a power factor over 90%. It shall have a publishedballast factor of 1 to ensure full lamp output. All ballast components shall be completelyremovable as a unitized assembly. All ballasts shall provide starting temperatures to -40°F.Quick disconnects and a terminal block shall be provided to simplify wiring and providepositive electrical connections. A protected starter, if specified, shall sense an inoperative ormissing HPS lamp and automatically shut down to prevent damage to the ballast windings.
OpticsThe HMSC optical assembly shall consist of formed aluminum reflectors with anodizedfinish. The IESNA cutoff symmetric distribution reflectors are spun and fluted. The IESNAcutoff asymmetric distribution reflectors are hydro formed and housed in a spun aluminumcover. All optical systems are enclosed with a clear drop borosilicate glass lens in a gasketeddoorframe. The doorframe includes four stainless steel latches and a hinge for re-lamping.
UL Listing
Fixture shall be UL listed for wet locations, UL/CUL listed for 40°C.
Ordering Information
Performance Specifications
A/B - Asymmetric OpticsMaximum Weight: 27 kg. (60 lbs.)Maximum EPA:1.56
Sq. Cover 4.35Cyl. Cover 2.62
C - Symmetric OpticsMaximum Weight: 27 kg. (60 lbs.)Maximum EPA:1.56
Sq. Cover 4.35Cyl. Cover 2.62
Distributions
Type II Cutoff, Asymmetric
Type V Cutoff, Symmetric
HOLOPHANE® | INFRASTRUCTURE | High Mast Series 15
| OUTDOOR LIGHTING
R6
OPTIONS
R
C4
OPTICS
ABC
LAMP7
ACCESSORIES
LAMP
85
BEAM ANGLE
789
STEP 5: BEAM ANGLE
STEP 1: LUMINAIRE
STEP 6: OPTIONS
STEP 8: ACCESSORIES
Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected)
Preferred Selections:
Most Frequently Ordered Catalog Numbers
HMSC1
LUMINAIRE
HMSC
400HP2
WATTAGE
400HPC10HP
483
VOLTAGE
48MT
STEP 2: SOURCE AND WATTAGE
STEP 4: OPTICS
HMSC High Mast System Cutoff A1 Narrow asymmetricB1 Wide asymmetricC Symmetric
7 Low8 Medium9 High
Ships Separately.F1 Single fuse assembly for 120,
240, 277 or 347VF2 Double fuse assembly for
208, 240 or 480VJ1 Cylindrical cover, blackL1 Cylindrical cover, bronzeM1 Square cover, blackN1 Square cover, bronzeLAMP Appropriate HID lamp
supplied PS-100 Replacement protected
starter for wattage 400 ormore
PS-1000 Replacement protectedstarter for wattage 1000
Factory Installed.FD1 1 Single fuse disconnect assemblyFD2 2 Double fuse disconnect
assemblyPS Protected starter for HPSR Photocontrol receptacle
(NEMA type)1 For 120, 240, 277 and 347V2 For 208, 240 and 480V
HIGH PRESSURE SODIUM400HP 1 400W HPS40RHP 1 400W HPS, mag reg750HP 1 750W HPSC10HP 1, 2 1000W HPS
METAL HALIDE400PM 400W MH, pulse startC10MH 1 1000W MH1 Mogul base lamp2 105°C supply wire required on all 1000W
HPS units
A/B C
STEP 3: VOLTAGE
08 1 208V12 120V20 208V24 240V27 277V34 347V40 1 240V48 480V1 Isolated secondary2 120, 208, 240, and 277V only.
Not available with 40RHP or 750HP
Acuity Brands Lighting, Inc.
Holophane Headquarters, 3825 Columbus Road,Granville, OH 43023Holophane Canada, Inc. 9040 Leslie Street, Suite 208, Richmond Hill, ON L4B 3M4Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, EnglandHolophane, S.A. de C.V., Apartado Postal No. 986,Naucalpan de Juarez, 53000 Edo. de Mexico
Contact your local Holophane factory salesrepresentative for application assistance, andcomputer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 740-345-9631. In Canada call 905-707-5830or fax 905-707-5695.
Limited Warranty and Limitation of LiabilityRefer to the Holophane limited material warrantyand limitation of liability on this product, whichare published in the “Terms and Conditions”section of the current Buyers Guide, and isavailable from your local Holophane sales representative.
Visit our web site at ww.holophane.com
HL-2396 12/08 ©2008 Acuity Brands Lighting, Inc Printed in USA
Buying products with the FSC label supports the growth of responsible forest management worldwide. The eco savings in the production of this brochure:
2.72 trees preserved for the future
7.85 lbs waterborne waste not created
1,155 gallons wastewater flow saved
128 lbs solid waste not generated
252 lbs net greenhouse gases prevented
1,926,610 BTUs energy not consumed
Luminaires may utilize fluorescent or high intensitydischarge sources that contain small amounts of
mercury. New disposal labeling for theselamps includes the mercury identifiershown on the left to indicate that thelamp contains mercury and should be
disposed of in accordance with local requirements.
Information sources regarding lamp recycling anddisposal are included on the packaging of mostmercury-containing lamps and also can be located at www.lamprecycle.org.
Product specifications may change without notice. Please contact your local Holophane factory sales representative for the latest product information.
10%
Cert no. SW-COC-002658
top related