hot car baby detctor

Post on 15-Apr-2017

26 Views

Category:

Engineering

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

HOT CAR BABY DETCTOR

Supervisor : Dr. Jamal Kharrosheh

PREPARED BY: Rimaa shehade Nema Abu Al KheerSamah Amodi

Out line:Introduction.Objective.Benifets .Achievements in last semesterAchievements in this semester.ProblemsSolutionsFuture workConclusion Recommendation

Introduction:In recent years, there have been a

number of accidents where babies are forgotten in a car.

During a hot summer day and in direct sunlight, a car’s interior temperature can reach as high as 65° C. Within minutes, a car can become a hot furnace exposing the child to life threatening conditions.

: Our Objective

The goal of this project is to design a reliable device that can accurately detect a child in a

hot car.

Benefits Life saving: by using modern technology and

some kinds of alarms.

Reliable:   *Device utilizes three human sensors, greatly  increasing the detection rate  *Send two sms for toe different persons . 

Achievement in last semesterIn last semester we studied the project

deeply and analyses it theoretically . we bought The suitable equipment for

project. we connected The sensors to each other

practically to test it .

Achievement in this semesterWe continue the program was

started in the last semester.We connected all the sensors

together and tested them.we work on the alarms which

contains send 2 sms’s by GSM modem , lighting and sound alarm and open the window .

ProblemsWe face some difficult in writing the

code .CO2 sensor : the price is very

expensive and not available here .We have some difficulty in final

design of the car to make it suitable for sensors.

Solutions We learn the arduino language to be able to

write a suitable code .We replace CO2 sensor by smoking sensor

which approximately give the same result.We make more types of design until reach

final design

Final Design

:Future workAdd oxygen sensor to see the time remaining

for the life of the child and rescue him.Add push button to prevent the alarm in case

it is not neededconnect the device directly with the Civil

Defense to increase the possibility to rescue the Children.

So ,It can convert this project with the development to product can be sold in markets

Conclusion :Although the problems we faced ,we able to solve it to achieve our goals

and have this final design

RecommendationFor the Health of your sons recommend that

all parents put this device in their cars.

Turn the system into a commercial product .

top related