how to burn a new img on vidon box?

How to Burn a New IMG on VidOn Box?

1. Boot up the VidOn Box.

2. Use a double headed USB cable to connect the box and PC (Note: use the

USB0 port besides the HDMI port)

3. Install the tool “PhoenixSuit” for updating the firmware, and update it to the

latest version. [ Download PhoenixSuit ]

4. Download the img package for updating the firmware, [ Download ]

5. Start PhoenixSuit then choose this "Firmware" button:

6. Click on the “Image” button to select the img package you want to burn.

7. Press BACK + HOME on the remote to power off the box (the following

power off screen must show up).

8. Press the power button on the remote to start the burning process.

9. You will be prompted by this dialogue box to ask you whether or not to

format your device. Choose “Yes” as shown below.

The burning is now in progress.

10. After the burning is complete, disconnect the USB device and the power

supply. Re-plug the power cable into the box and the box will automatically

boot up. You now have the newest firmware installed.