icce-19 july 24-30, 2011 shanghai, chinasite.icce-nano.org/clients/iccenanoorg/timetable web,...
Post on 20-Mar-2018
220 Views
Preview:
TRANSCRIPT
ICCE-19 July 24-30, 2011 Shanghai, China
July 24, 2011 Sunday night reception andc registration 7:00PM-9:00PM
July 25, 2011 Monday Keynote Lectures, 8AM-12:45PM
Chairs: H.U. Habermeier, J. Nogues Globalization of Education and Research (opening speech) Kendall T. HARRIS (Dean of Engineering, Prairie View A&M U., Texas) 8:00AM-8:15AM
A Few Interesting Size-Scale Problems Of Low-Dimentional Ferroelectric Materials Daining FANG (Peking U., China) 8:15AM - 8:45AM
Advanced Continuous Nanofibers And Structural Supernanocomposites: Status And Prospects Yuris DZENIS (U. Nebraska-Lincoln) 8:45AM-9:15AM
Status In The Growth Of Anisotropic Oxide Thin Films And Heterostructures For Future Electronics Kazuhiro ENDO (Kanazawa I.T. Japan) 9:15AM-9:45AM
Carbon Nanopaper Enabled Structural And Multifunctional Nanocomposites Jihua GOU (U. Cen. Florida) 9:45AM-10:15AM
Chairs: K.T. Haris, L. Feo Complex Oxide Interfaces – A Tool To Design New Materials Hanns-Ulrich HABERMEIER (Max-Planck-Inst. Stuttgart, Germany) 10:15AM-10:45AM
Directions For Hypersonic Thermal Protection Systems And Materials Severed At Ultra- High-Temperature Environment Jiecai HAN (Harbin I.T., China)
Novel Structural And Magnetic Effects In Passivated Antiferromagnetic Transition Metal Monoxides: Inverted Antiferromagnetic (AFM)/Ferrimagnetic (FIM),
Core/Shell Nanoparticles Josep NOGUES (UAB, Bellaterra, Spain) 11:15AM-11:45AM
Advancement of Basalt Fibers towards Structural Applications Zhishen WU (Southeast U., Nanjing, China and Ibaraki, Japan) 11:45AM-12:15PM
Multiple Levels, Scales And Functions In Micro/Nano Structures Of Dragonfly Wing Veins Zheng ZHONG (Tongji U., Shanghai, China) 12:15PM-12:45PM
12:45PM-2:15PM LUNCH
Session 1a MATH 1
Monday 2:15PM-4:45PM Ballroom 1
Chairs Q. Gao, B. Tian, G. Westin, K.C. Chuang
A Precise Numerical Method for Surface
Waves in a Layered Space Q. GAO, W.X.
Zhong (Dalian U.T., China)
Theoretical Analysis And Numerical Modeling
Of Elastic Wave Propagation In Honeycomb-
Type Periodic Structures Biyu TIAN, Bing
Tie, Denis Aubry (Ecole Centrale Paris, France),
Xianyue Su (LTCS, Prking U., China) Scalable Solution Based Processes To Energy
Materials Gunnar WESTIN, Annika Pohl, Åsa
Ekstrand (Uppsala U., Sweden), Kjell Jansson
(Stockholm U., Sweden)
In-Plane Dynamic Displacement Measurement
Using A Pointwise Fiber Bragg Grating Sensing
System Kuo-Chih CHUANG (Zhejiang U., Hangzhou, China), Chien-Ching Ma (Nat. Taiwan U.,
Teipei) Mon-Tues
Nonlinear Thermo-Mechanical Responses Of Smart
Skin Sturctures Kwang-Kyu YOO, Ji-Hwan Kim
(Seoul Nat.U., S. Korea) Mon-Tues
Hygrothermal Effects On The Structural Behaviors
Of Functionally Graded Plates Chang-Yull LEE, Ji-
Hwan Kim (Seoul N.U., S.Korea) Mon-Tues
Effects Of Cutout Shapes On Postbuckling
Response Of Quasi-Isotropic Laminate Under
Combined In-Plane Loads Dinesh KUMAR, S.B.
Singh (Birla I.T.,and Sci., India) Mon-Tues 4PM
An Effective Flaw Model On Analyzing Nanofiller
Agglomeration In Nanocomposite Materials L.
Roy XU, Arun Krishnan (U. Texas-El Paso) Mon-Tues
Session 1b MAGNETIC 1
Monday 2:15PM-4:45PM Ballroom 2 Chairs: C. Ke, D.S. McLachlan, V. Kudrle, S.K. Bose
Preparation And Magnetization Of Iron Nanowire
Arrays With Different Configurations C. KE
(Southwest Jiaotong U., Chengdu, China), C.H. Cheng
(U. NSW, Sydney, Australia), G.X. Yang (SWJTU),
Y. Zhao (SWJTU, and U. NSW)
Percolation Behavior in the Magnetic Permeability
and Conductivity of Conducting Magnetic -
Insulating Non Magnetic Binary Composites David
S. McLACHLAN (U. Stellenbosch, S.Africa), T B Doyle (Faure, S. Africa), Godfrey Sauti.(Hampton,
VA)
Versatile Pecvd Process For Preparation Of Iron-
Based Magnetic Nanoparticles P. Zelina, O. Jasek, V.
KUDRLE (Masaryk U., Brno, Czech Rep.), B. David,
N. Pizúrova (ASCR, Brno, Czech Rep.), D. Hemzal (Masaryk U., Brno)
Magnetism And Electronic Transport in
(Cu,Ni)2MnSn Heusler Alloys Under Ambient And
Elevated Pressures S.K. BOSE (Brock U., Ontario,
Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci, Prague)
Magnetism and Half-Metallicity Of Some Cr-based
Alloys And Their Potential For Application In
Spintronic Devices Yong LIU (Yanshan U., Hebei,
China), Shyamal K. Bose (Brock U., Ontario, Canada)
Temperature Behavior Of Light Scattering by
Ba2NaNb5O15 Crystal S. IVANOVA (Lebedev Phy.
Inst. RAS, Moscow, Russia) Formation Of CuxO
(x=1, 2)
Nanowires By Thermal Annealing Copper Film
Deposited On Ti/Si Substrate Yao WANG, Ruiqi
Shen, Yinghua Ye, Yan Hu, Peng Zhu (Nanjing U. Sci.Tech., China)
Session 1c INFRA 1
Monday 2:15PM-4:45PM Ballroom 3
Chairs: H.Y. Jeon, Na Wang, J.Y. Wu, H.S. Ahn
Dependence Analysis Between Stress Crack
Resistances And Long-Term Performance Of
HDPE Geomembrane Han-Yong JEON,
SuKyung Kim, JuHee Park (Inha U., S. Korea)
Structural Health Monitoring and Next
Generation SCADA Of Pipes Network
Retrofitted With FRP Composites
Ayman MOSALLAM, M. Shinozuka
(UC Irvine, Calif.)
Study of Coaxial Connecting Methods of FRP
Rebars with Winding Fiber Cloth Composites
G.Q. YUAN, G. Dong, J. Ma (Tongji U.,
Shanghai, China), Luciano Feo (U. Salerno,
Italy), David Hui (U. New Orleans)
Investigation Of Natural Rubber Composites
With Addition Of Mesoporous MCM-41
Fillers Na WANG, Xiangzhou Wang, Jing
Zhang, Qinghong Fang (Shenyang U. Chem.
Tech., China), David Hui (U. New Olreans)
Durability Study Of BFRP Bars Immersed In
Water And Alkaline Solution Jingyu Wu,
Guijun XIAN, Hui Li (Harbin I.T., China)
Dynamic Characterization Of A Delaminated
Ship Deck Plate Ionel Chirica, Elena-Felicia
Beznea (U. Galati Romania), David Hui (U. New
Orleans)
Session 1d BIO 1
Monday 2:15PM-4:45PM Dalian Room
H. Bao, P.C. Chen, S. Kambo, Jinhai Yu
Simulation For Exogenous Microbial Depolymerization Of
Polyethylene Glycol Hongmei BAO, Masaji Watanabe (Okayama U.,
Japan), Fusako Kawai (Kyoto I.T., Japan)
Searching for the Optimum Conditions of NLC-Sunscreen Formulae
by Using Taguchi’s Method Pao-Chi CHEN, H.C. Chen, J.W. Huang
(Lunghwa U.Sci.Tech., Taoyuan), J. Pang (Taiwan AC Sci. Inc.,
Taoyuang) Citric Acid As An Effective Release Retarding Agent In Matrix Tablets
Formulation Sunil KAMBOJ (M.M. Univ., Ambala, India), G.D. Gupta (Punjab,
India), Suman Kamboj, Anroop B. Nair, Sumeet Gupta, Vipin Saini (M.M. Univ.,
India)
Engineering of a Novel Pluronic F127/Graphene Nanohybrid for Drug Delivery
Jinhai Yu (Qingdao U. Sci.Tech., China), Haiqing Dong, Yongyong LI (Tongji U.
Shanghai, China) Human Bone As Composite Material M.E. Aksoy (Min. of Health, Istanbul,
Turkey), I. Kutbay, M. Usta (Gebze I.T., Turkey), C. Bindal (Sakarya U.), A. Gul (Istanbul T.U.), A. Hikmet UCISIK (Bogazici U., Bebek- Istanbul, Turkey)
Diagrams For Quasi-Brittle Fracture Of Bimaterial V.M. KORNEV, V.D.
Kurguzov, N.S. Astapov (Novosibirsk, Russia) Preparation And Characterisation
Of Hydrophilic/Hydrophobic Composite Scaffolds Chengdong JI, Xia Zhong (U.
Sydney, Australia), Sergei G. Kazarian (U. College, London, UK), Andrew Ruys,
Fariba Dehghani (U. Sydney) Mon-Wed
Session 1e GENERAL 1
Monday 2:15PM-4:45PM Hangzhou Room
Chairs: W. Gennari, F. Rumiche, J .Ihm, A.A. Kadir
Epoxy Granite Toolholders for Turning Applications Walter GENNARI
(U. Brasilia, Brazil)
Double-Walled Carbon Nanotube Structured Hydrogen Sensors
Francisco RUMICHE (Pontificia U. Catolica Peru, Lima), H.H. Wang
(Argonne N.L., IL), J.E. Indacoche (U. Illinois Chicago)
Hydrogen Storage In Metal-Decorated Nanostructureed Materials
Jisoon IHM, Keunsu Choi, Jaehyun Bae, Changwon Park (Seoul Nat U., S.
Korea) Mon-Tues before 3PM
Microstructure Analyses On The Effect Of Incorporating Cigarette
Butts In Fired Clay Bricks Aeslina Abdul KADIR (UTHM, Johor,
Malasia), Abbas Mohajerani (RMIT, Melbourne, Australis) Mon An Investigation On The Tribological Properties Of Over Deformed Al/SiCP
Composites M. Baki KARAMIS, F. Nazlı Sarı, Veysel Erturun (Erciyes U., Turkey)
Mon-Tues noon
Synthesis of TeO2 nanowires by simple thermal oxidation of Te
Nanowire Changzeng YAN, Dae Joon Kang (Sungkungkwan U.,
Suwon, S. Korea)
Computation And Stereographic Visualization Of Temperature And
Heat Flux In A Thermal Barrier Coating Of A Turbine Blade Stephen Akwaboa, S. Kodiyalam, Amitava JANA, P. Mensah, R. Diwan
(Southern U. Baton Rouge, LA) Mon-Tues
Short Break 4:45-5:00PM
Session 2a MATH 2
Monday 5:00PM-7:30PM Ballroom 1
Chairs: L.Zhao, W. Qiu, J. Majak, A. Alonso
Study On Dielectric Properties Of CNF/Pei
Composites Lijie ZHAO, Gang Sui, Xiaoping
Yang (Beijing U. Chem Tech., China)
Buckypaper (Carbon Nanotube Film) as
Mechanical Sensor by Micro-Raman
Spectroscopy Wei QIU, Yi-Lan Kang, Wei-
Lin Deng, Qiu Li (Tianjin U., China)
Ballistic Properties Of Polymer Matrix
Composites And Ceramic Plates Used In
Armor Design Mehmet COLAKOGLU (U.
Pretoria, S. Africa), Omer Soykasap (Afyon
K.Univ., Turkey)
Stationary Of The Strain Energy Density In
Anisotropic Solids Juri MAJAK, Meelis
Pohlak (Tallinn U.T., Estonia) Electrohydrodynamic Generalized Dispersion of
Unsteady Convective Diffusion in Couple Stress
Poorly Conducting Fluid Bounded by Porous Layer
K.S. MALLIKA, N..Rudraiah (Global Acad Tech., Bangalore, India)
Effective Properties Of Multilayered Composites In
Spherical Coordinates
Alejandro ALONSO Fúster , Raúl Guinovart Díaz,
David Guinovart Sanjuán, Julián Bravo Castillero,
Reinaldo Rodríguez Ramos (La Habana, Cuba)
Modelling Of Effective Elastic Properties And
Crack Bridging In Metal-Ceramic Interpenetrating
Phase Composites Michał BASISTA, Zuzanna Poniżnik (Polish Acad Sci, Warsaw)
Investigation Of Interlaminar Resistance Of Angled
Laminate Beams
Gang ZHOU, P. Nash (Loughborough U., UK), J.
Callahan, J. Haworth, K. O’Brien, B. Aspinall, P.
Ripley, J. Rishton (Aircelle Ltd, Burnley, UK)
Session 2b MAGNETIC 2
Monday 5:00PM-7:30PM Ballroom 2
Chairs: Y. Shen, N.D. Sang, J. Zeng, T.C. Chen
Is The Dip Of Reflectance Always Caused By
Plasma? Yan SHEN, Wei-Xi Zhou, Jian-Bo Chen, Jing Li, Yu-Xiang Zheng, Hai-Bin Zhao, Rong-Jun
Zhang, Liang-Yao Chen (Fudan U., Shanghai, China),
Wei Li, Xun-Ya Jiang, (Shanghai Inst. Microsys Inform Tech, CAS, China), David W. Lynch (Iowa St.U.,
Ames)
Effect Of Sulfamic Acid As Complexing Agent On
Electrodeposition of CIGS Absorber Thin Film
Pham Hong QUANG, Dang Thi Bich Hop, Ngo Dinh
Sang, Le Tuan Tu, Nguyen Hoang Nghi (Hanoi U. Science, Vietnam)
Effect Of Electrodeposition Potential On The
Composition And Morphology Of CIGS Absorber
Thin Film NgoDinh SANG (Nat. U. Civil Eng.,
Hanoi, Vietnam), Pham Hong Quang, , Le Tuan Tu,
Dang Thi Bich Hop, Nguyen Thanh Nghi (Hanoi U. Sci, Vietnam)
Influence Of Humidity And Elevated Temperature
On Magnetic Properties Of Nd-Fe-B Anisotropic
Bonded Magnets Dariusz KAPELSKI, Barbara
Slusarek, Bartosz Jankowski, Marcin Karbowiak,
Marek Przybylski (Tele and Radio R.I., Warsaw, Poland)
Rapid Initiation Of Reactions In Al/CuO-Based
Reactive Multilayer Films Xiang ZHOU, Ruiqi Shen (Nanjing U. Sci.Tech., China)
Percolation and Conductivity of SWNT Networks
with Layer-By-Layer Spray Deposition
Y. Miao, L. Chen, Q.Q. Yang, R. Sammynaiken, W.J.
(Chris) Zhang (U. Saskatchewan, Canada)
Nanoscale Mechanical And Mechanically-Induced
Electrical Behaviors Of Silicon Nanowires
Tei-Chen CHEN, Yen-Hung Lin (Nat. Cheng Kung U., Tainan), Yuh J. Chao (U. South Carolin), Xiaodong Li
(Nat. Cheng Kung U.)
Session 2c INFRA 2
Monday 5:00PM-7:30PM Ballroom 3
Chairs: H. Lim, X.Y. Wang, B.C. Tobias, Z.
Ouyang
Properties Of Non-Shrinkage Chemical Grout
Using Silanol/Si-Oh For Repairing And
Strengthening Of Concrete Structures H.J.
JU, D.H. Lee, K.S. Kim, D.H. Kim,
J.Y. Kwak (G-stone, Seoul, S. Korea)
Consolidation Of Silica Sand-Cement
Frogbrick Composites
Benjamin C. TOBIAS (Catholic U. Daegu,
Hayang, S. Korea)
Experimental Study On Basalt Fiber
Reinforced Syntactic Foams
Morampudi Vijay, Zhenyu OUYANG (Southern
U. A&M U., Baton Rouge, LA)
Buckling And Postbuckling Behaviour Of A
Delaminated Ship Deck Plate Subjected To
Shear Loading Ionel CHIRICA, Elena-Felicia
Beznea (U. Galati, Romania), David Hui (U.
New Orleans) Longitudinal Wave Velocity Of Bonded PSC Wires
Embedded In Nuclear Containment
Byeong Hwa KIM (Kyungnam U., S. Korea), Do Hyung Lee (Paichai U., Daejeon, S. Korea)
Storage Stability And Physical Properties Of
Asphalt Modified With Nanoclay And Warm
Asphalt Additives
Mohd Ezree ABDULLAH, Kemas Ahmad Zamhari,
Nafarizal Nayan (UTHM, Johor, Malaysia), Mohd Rosli Hainin (U.Teknologi Malaysia), Madi Hermadi
(UTHM, Johor, Malaysia)
Volume Changes In Slag In The Subsoil Of
Constructions And Their Influence On Load-
Bearing Structures Radim CAJKA, Petr Martinec
(T.U. Ostrava, Czech Rep.)
Session 2d OXIDE 1
Monday 5:00PM-6:55PM Dalian Room
Chairs: K. Fujiwara, P. Mele, Y. Tsuchiya Q. Guo
Structural Properties Of Magnetite Films Grown By Pulsed Laser
Deposition Qixin GUO, Kazuki Nakamura, Katsuhiko Saito, Tooru
Tanaka, Mitsuhiro Nishio (Saga U., Japan), Makoto Arita, Yoshifumi Ikoma
(Kyushu U.,Fukuoka, Japan), Jian Ding, Di Zhang (Shanghai Jiaotong U.,
China) INVITED
Observation of Local Electrochemical Phase Change in Resistive
Switching Devices Kohei FUJIWARA (Osaka U., Japan), Yosuke Konno,
Yoshinobu Nakamura (U. Tokyo, Japan), M.J. Rozenberg (U. Paris-Sud,
France), Hidenori Takagi (RIKEN, Saitama, Japan) INVITED
Synthesis and Characterization of YBa2Cu3Ox Thin Films
Incorporating BaSnO3 Length-Controlled Nanorods
Paolo MELE (Hiroshima U., Japan), K.Matsumoto, Y. Honda, I. Tanaka
(Kyushu I.T., Japan), A. Ichinose (CRIEPI), Y. Yoshida, Y. Ichino (Nagoya
U., Japan), R. Kita (Shizuoka U., Japan) INVITED
Single-Walled Carbon Nanotube/PMMA Composite via an
Electrostatic Adsorption Assembly Technique Hiroyuki MUTO, Norio
Hakiri, Go Kawamura, Atsunori Matsuda (Toyohashi U.T., Japan)
INVITED
Pulsed Laser Deposition Of LaFeO3 Thin Films Using The Target
Prepared By Pechini Method Yoshito TSUCHIYA, Kento Norota, Yuta
Watabe, Takuji Kuroda, Nobuyuki Iwata,Takuya Hashimoto, Hiroshi
Yamamoto (Nihon U., Chiba, Japan)
Growth Of AFeOX (A = Ca, Sr) By Pulsed Laser Deposition Method At
High Pressure Oxygen And Ozone Atmosphere Kento NOROTA,
Yoshito Tsuchiya, Yuta Watabe,Takuji Kuroda, Nobuyuki Iwata, Takuya
Hashimoto, Hiroshi Yamamoto (Nihon U.,Chiba, Japan)
Special OXIDE BREAKOUT SESSION Monday 7:00PM-7:30PM Dalian Room
Chairs: T. Endo, H. Muto, K. Tanaka
K. ENDO, H.-U. HABERMEIER, J. NOGUES 5`talks, and discussion
Session 2e GENERAL 2
Monday 5:00PM-7:30PM Hanzhou Room
Chairs: L. Feo, S.R. Das, H. Marzouk, D.Z. Chen, M.A. Omar
Crashworthiness Of Vehicle Composite Sandwich Structures P. C. Neves (IDMEC, Porto, Portugal), A. A. Fernandes, A. J. M.
Ferreira (U. Porto, Portugal)
Formation Of Heterogeneous Microstructure In Steel Plate
Processed By Accumulative Surface Forming
Libor KRAUS, Michal Zemko, Zbysek Novy (COMTES Fht,
Czech Rep.)
Experimental Study Of The Instability Of Longshore Currents
On Different Plane Beaches Zhili ZOU, C.P. Ren, D.H. Qiu
(Dalian U.T., China)
Two-Input Or/Nor Cascade In Space Compression In VLSI
Sunil R. DAS (Troy U., Montgomery, AL), Satyendra N. Biswas
(Dhaka, Bangladesh), Altaf Hossain, Mansour H. Assaf (U. Ottawa,
Canada)
Impact-Echo Technique For Detecting The Cracks Propagation
In Concrete Plates N. Dawood, H. MARZOUK (Ryerson U.,
Toronto, Canada)
Composite Repair Using Vartm Techniques Ronald
STERKENBURG, PengHao Wang (Purdue U., W. Lafayette, IN)
Advanced Simulation and Analysis of Materials Behavior
during Intense Power Deposition in Tokamaks, Inertial Fusion,
and EUV Lithography Devices Ahmed HASSANEIN, V. Sizyuk,
T. Sizyuk, G. Mihloshevsky, S. Harilal (Purdue U., W. Lafayette,
IN)
Development Of Fracture Fixation Plates Prototype Through
Metal Injection Moulding (Mim) Process
Mohd A. OMAR, I. Subuki, N. Abdullah, M.F. Ismail, A.H.
Hashim (SIRIM, Kedah, Malaysia), A.H. Zulkifly (U. Malyasia
Kuantan, Pahang)
Session 3a MATH 3
Monday 7:30PM-10:00PM Ballroom 1
Chairs: S. Jafari, H.S. Ullah Butt,
O. Benjeddou, S.Y. Sun
Natural Frequency Analysis Of Thick
Rectangular FGM Plates Under In-Plane
Loading By Differential Quadrature
Method Saeed JAFARI, Mansour
Mohieddin Ghomshei (Islamic Azad U.,
Iran)
Basic Study of Wimax Simulation
Monika RANI, Anil Rose (Denhandhu C.R.
Univ., Haryana, India)
Coupled Structural/Thermal Analysis Of
Cylindrical Part Of Multilayered
Composite Vessel
A. HOCINE, H. Ghouaouala, F. Kara Achira
(Hassiba BEnbouali U.,Algeria)
Size Effect On Tensile Stress Of Dry
Unidirectional Carbon Fibers Sheets
Omrane BENJEDDOU, Oualid Limam,
Mongi Ben Ouezdoua (Ecole Nat Ing
Tunis,Tunisia)
Interfacial Toughening Mechanism Of
Foam Core Composite Sandwich Beams
With Chopped Fibers
Shiyong SUN, Chen Haoran (Dalian U.T.,
China)
The Language of Two-by-two Matrices
spoken by Optical Devices Y.S. KIM (U.
Maryland) Analysis of Micromechanical Behavior in
Short Fiber Composites
HongGun KIM, Lee Ku Kwac, Seung Gyu Oh,
Tae Hoon Kim, Bophang Sorn,Hee Jae Shin
(Jeonju U., S. Korea), Chai Young Lim, Ki Hyun
Yoo, Jeong Sang Song,Yong Hong (Chonbuk, S.
Korea)
Session 3b METAL 1
Monday 7:30PM-10:00PM Ballroom 2 Chairs: Y. Tian, R. Kozera, P. Chabera,H.
Bayrakdar
Corrosion Behavior of KFRP at High
Temperature Dry-Wet Cycle In Salt Water
Ye TIAN, Dongxing Zhang, Dihong Li, Haiying
Xiao, Jin Jia (Harbin I.T., China)
Corrosion Behavior Of Different Prestressing
Strand Types For Use In The Post Tensioning
Of Bridges R.D. Kalina, S. MacLean, J.E.
Breen, Harovel G. WHEAT (U. Texas, Austin)
Effect Of Electroless Metallization Parameters
Of Carbon Fibres On Ni-P Coatings
Rafał KOZERA, Jerzy Bieliński, Anna
Sałacińska, Joanna Olejniczak, Anna
Boczkowska, Krzysztof J.Kurzydłowski (Warsaw
U.T., Poland)
Microstructure And Mechanical Properties Of
Cermic-Metal Composites Obtained By
Pressure Infiltration PAULINA CHABERA,
Anna Boczkowska, Artur Oziębło, Zbigniew
Pakieła, Krzysztof J. Kurzydłowski (Warsaw
U.T., Poland)
Microwave Absorption Properties Of
Ferrite–Acrylated Epoxy Polymer
Nanocomposites Harun BAYRAKDAR
(Gebze I.T., Turkey) Laser Cladding Of Cu0.5 NiAlCoCrFeSi High
Entropy Alloy On AZ91D Magnesium Substrates
T.M. YUE, K.J. Huang (Hong Kong Poly U., SAR,
China) Mon-Tues
Core-Shell Structure And Mechanical Behavior Of
A New Type Of Iron-Containing
Titanium/Hydroxyapatite Composites Q. Chang, Daolun CHEN (Ryerson U., Toronto, Canada), H.Q.
Ru, X.Y. Yue, L. Yu, C.P. Zhang (Northeastern U.,
China) Mon-Wed
Oxidation Behaviour Of Ion-Implanted
Nanocrystalline Fe-Cr Alloy Fabricated By
Different Densification Techniques: Spark Plasma
Sintering And Hot-Pressing
Darwin SEBAYANG, Deni S. Khaerudini, H. Saryanto,
M.A. Othman, S. Hasan(UTHM, Johor, Malaysia), D. Fredrick (Santa Rosa, Calif.), T. Sujitno, P. Untoro
(Banten, Indonesia)
Session 3c CHEM 1
Monday 7:30PM-10:00PM Ballroom 3 Chairs: Y.N. Makogon, B. Jiang, F.M.B. Marques
M.B. Agustin
Thermostimulated Synthesis Of MoO3 And
WxMo 1-XO3 Nano- And Microscale Particles
And Their Application For Deposition Of Ni-
Oxide Composites T.V. SVIRIDOVA, L.I.
Stepanova, D.V. Sviridov (Belarusian St.U.,
Belarus)
Formation of L10(FePt) Phase In
Nanodimensional Fe/Ag/Pt and
Fe50Pt50/Ag/Fe50Pt50 Film Compositions On
Substrates of SiO2/Si(001) Yu N. MAKOGON (Nat. T.U. KPT, Kiev, Ukraine), M. Albrecht, G.
Beddies (Chemnitz U.T., Germany), D.L. Beke, G.L. Katona (U. Debrecen, Hungary), E.P. Pavlova, S.I.
Sidorenko, T.I. Verbitska, I.A. Vladimyrskiy (Nat. T.U.,
KPI)
Preparation of Organic-Inorganic Hybrid AR
Coating by Sol-gel Process
Xinxiang Zhang, Xi Ke, Sida Zhang, Zhili He,
Bo JIANG (Sichuan U., Chengdu, China)
Mixed Ionic Conduction In Homogeneous And
Layered Composite Electrolytes F.M.B.
MARQUES, T. Saradha, A.S. Fereira, S.G.
Patrício, F.M.L. Figueiredo(U. Aveiro, Portugal) Reinforcement Of Starch-Based Biocomposite Film
By Microcrystalline Cellulose From Corn Husk
Melissa B. AGUSTIN, Rohit C. Tilwani, Eriel May T. Bandong, Joel R. Salazar (Central Luzon St.U., Nueva
Ecija, Philippines), Weerachai Phutdhawong
(Kasertsart U., Nakhorn Pathom, Thailand)
Vortex-Induced Assembly Of Protein Nanofibrils:
Towards New Scaffold Materials
Wojciech DZWOLAK (U. Warsaw, Poland)
Novel Application Of Insulin Amyloid
Superstructures As Templates For Surface-
Enhanced Raman Scattering
Slawomir WOJCIK, Wojciech Dzwolak (U. Warsaw,
Poland)
Perylene Diimide (PDI) Based Organic Photovoltaic
Cells with Nano-Fabric Composite Structure
Yong MIN, June H. Park, Austin R. Carter, Lynetta M.
Mier, Sharlene M. Lewis, Raju P. Nandyala (Ohio St.U., Columbus)
Session 3d NANO 1
Monday 7:30PM-10:00PM Dalian Room Chairs: Xiaoyun Jin, Y.ongjian Yang, F. Zairi, x.Y. Jin
Micromechanics-based Modeling of the Effective Viscoelastic Behavior
of Polymer/clay Nanocomposites: Application to Polyamide-6
Reinforced with Modified and Unmodified Montmorillonite Clay K.
Anoukou, F. ZAIRI, M. Naït-Abdelaziz, A. Zaoui, J.M. Gloaguen (U. Lille
Nord de France)
Template-Based Synthesis Of Al/Ni Nanocomposite On Silicon
Substrate Xiaoyun JIN, Yan Hu, Ruiqi Shen, Yinghua Ye (Nanjing U.
Science & Tech.)
Structure and Thermomechanical Properties of Amorphous/Nano-
Crystalline Composites of Shape Memory Ti2NiCu Pnina Ari-Gur (U.
Western Michigan, Kalamazoo), Yongjian YANG (U. Auckland, New
Zealand), S. Belyaev (St. Petersburg, Russia), V. Koledov, D. Kuchin
(Moscow, Russia), W. Gao (U. Auckland), N. Resnina (St. Petersburg),
Plasma-Assisted Synthesis And Modification Of Composite
Nanoparticles In Liquids Nikolai TARASENKO, Andrei Butsen, Alena
Nevar, Mikhail Nedelko, Mehdi Mardanian (NAS, Minsk, Belarus)
Formation of InAs Nanowire by Solid Source Reaction: A Promising
Material As The High Mobility Channel For Nanoelectronics Yu-Lun
CHUEH (Nat. Tsinghua U., Hainchu), Alexandra C. Ford, Ali Javey (UC
Berkeley, Calif.) chair
Preparation and Properties of GRAPHENE and its
NANOCOMPOSITES Chen-Chi M. MA, Shin-Yi Yang, Hsi-Wen Tien,
Jen-Yu Wang, Shin-Ming Li, Yu-Sheng Wang, Chia-Hong Liu, Shu-Han
She, Wei-Ning Lin (Nat. Tsinghua U., Hsinchu) Mon-Tues
Session 3e GENERAL 3
Monday 7:30PM-10:00PM Hangzhou Room Chairs: R. Pan, J.W. Kim, J.M. Ting, A.K. Bharimalla
Polyurethane Hybrid Composites Containing Trisilanolisobutyl Poss:
Preparation, Structure And Properties Rui PAN (Sichuan Normal U.,
Chengdu, China), Ing Kong, Robert. Shanks (RMIT, Australia)
Optimization Of An Airbag Inflator For The Protection Of Occupant
Injury Jin-wu KIM, Sheikh-Md. Rasel, Jung-il Song (Changwon N.U.,
Kyungnam, S. Korea) Mon-Tues
Effect of Refining Pretreatment on Preparation Of Cellulose
Nanofibrils By Mechanical Process A.K. BHARIMALLA, V.S.
Karande, S.T. Mhaske, N. Vigneshwaran (Mumbai, India)
Application Of Atmospheric Pressure Plasma Treatment To Improve
Hydrophilc Property Of Aluminum Foil JaeHa LEE, JaeYoung Jang,
Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), HyunWook Kim
(Dongwon Tech Co. Kimhae, S. Korea) 5 min
Atmospheric Pressure Plasma Treatment Of Polypropylene As Door
Panel Part Material JaeYoung JANG, JaeHa Lee, KyongYop Rhee
(Kyung Hee U., Yongin, S. Korea), Hyun Wook Kim (Dongwon Tech Co.,
Gimhae, S. Korea) 5 min
Improvement Of Hydrophilic Property Of Magnesium Alloy Panel
Through Oxygen Plasma Modification Kyong Yop RHEE, Jae Young
Jang (Kyung Hee U., Yongin,S. Korea) 5 min
Non-covalently Functionalized Carbon Nanotubes as Catalyst Supports
for Fuel Cell Applications
Shuangyin WANG, Xin Wang (Nanyang T.U., Singapore)
Session 4a MATH 4
Tuesday 8:00AM-10:30AM Ballroom 1
Chairs: M.F. Ren, C.L. Zhang, N.H. Zhang, J.Y.
Liu
Calculating Investigation On Some Effective
Properties Of Interpenetrating Phase
Composites Hongtao ZHANG (Jiangxi Blue
Sky U., Nanchang, China)
Structural Behaviour Of Composite Cladding
Panels
Jian YANG, Yumin Sun (U. Birmingham, UK)
Inspection Of Subsurface Defects In
Honeycomb Structure Composites Using
Infrared Lock-Cn Thermography Junyan
LIU, Yang Wang (Harbin Inst. Tech., China)
Reinforcement Efficiency Of Carbon
Nanotubes: Probablistic Study Of Nanotube
Waviness Roham RAFIEE (U. Tehran, Iran)
Finite Element Analysis For Interface Crack
In Piezoelectric Composite Under Impact
Loading Rui-Xiang BAI, Liang Wang (Dalian
U.T., China), Ye-Jin Shi (COMAC,Shanghai
Aircraft Design & Res.Inst., China)
Stresses Development In An Advanced Grid-
Stiffened Plate During The Co-Curing Process
Mingfa REN, Qizhong Huang, Haoran Chen
(Dalian U.T., China)
Vibrational Analysis Of Carbon Nanotubes In
Thermal Environments
Chen-Li ZHANG, Hui-Shen Shen (Shanghai
Jiaotong U., China), Jie Yang (RMIT, Melbourne,
Australia)
A Model For Nanomechanical Behaviours Of
Microcantilever-Based Single-Stranded Dna
Chips Induced By Conformational Entropy
Neng-Hui ZHANG, Zou-Qing Tan, Jin-Ying
Shan (Shanghai U., China)
Session 4b TEXTILE 1
Tuesday 8:00AM-10:30AM Ballroom 2
Chairs: B. Provost, J.K. Luo, , M.K. Yakubu,
J.M. Byeon
2D Laminated and 3D Warp Interlock
Fabric Under High Velocity Impact
Benjamin PROVOST, François Boussu,
Daniel Coutellier (U. Lille Nord de France)
Flax Fibre Reinforced Poly Lactic Acid
Composites by Solvent-Casting Method
Mohammed K. YAKUBU (Ahmadu Bello
U., Zaria, Nigeria) , Rakesh Kumar (CSIR,
Port Elizabeth, S. Africa
Effect Of Various Surface Treatments For
Jute Fiber Reinforced Composites
Jeong-myung BYEON, Jin-woo Kim, Gi-
beop Nam, Jung-il Song (Changwon N.U.,
S.)
Shape Memory Effect and
Thermomechanical Properties Shape
Memory Polymer Fabric Composite in
Tension Mode M. Ahmad, D. Singh, M.
Miraftab, J.K. LUO (U. Bolton, UK)
Session 4c CHEM 2
Tuesday 8:00AM-10:30AM Ballroom 3
Chairs: M. Ionita, A. Oki, B. Ahmmad, C.L.
Cheung
Atom Counting And Atomic Structure For
Monolayer-Protected Gold Clusters Via
Quantitative HAADF- STEM Zhiwei WANG
(U. Birmingham, UK), O. Toikkanen (Aalto U.,
Finland), F. Yin, Z.Y. Li (U. Birmingham), B.M.
Quinn (Aalto U.), R.E. Palmer (U. Birmingham)
Impact Of Chemical Functionalization Of
Swcnts On PPY Nanocomposites: Multiscale
Molecular Modeling And Experimental
Investigations Mariana IONITA, Alina Pruna
(U. Poli Bucharest, Romania)
Pd Nanoparticles Deposited On Poly(Lactic
Acid) Grafted Carbon Nanotubes: Synthesis,
Characterization And Application in Heck C-
C Coupling Reaction Gururaj M. Neelgund,
Aderemi OKI (Prairie View A&M U., TX)
Inorganic Polyoxide Thermoplastics
Alexander SHAULOV, A. Grachev, A.
Lyubimov, G. Lyubimova, E. Stegno, A. Berlin
(Semenov Inst., Moscow, Russia) Green Tea Mediated Biosynthesis Of alpha-Fe2O3
Nano˗/ Micro-Particles And Their
Characterization Bashir AHMMAD (Okayama U.,
Japan), Junichi Kurawaki (Kagoshima U., Japan), Takahiro Ohkubo, Yasushige Kuroda (Okayama U.)
Vertical Growth Of Metallic Boride Nanowires And
Their Field Emission Properties
Robert M. Jacobberger, Joseph R. Brewer, Chin Li
CHEUNG (U. Nebraska, Lincoln)
Polymer/Layered Double Hydroxide
Nanocomposites Kongli Xu (Inst.Chem, CAS, Beijing,
China), Guangming CHEN (Graduate Univ. CAS)
The Effect Of Boundary Layer On Activated Liquid
Phase Sintering Of W-bronze Composites by Co and
Fe Additions Mohamad S Kahtan, R. Azmi (U. Malaysia Perlis)
Session 4d OXIDE 2
Tuesday 8:00AM-10:30AM Dalian Room
Chairs: M. Singh, H. Kezuka, N. Iwata, M. Yokura
Improvement Of R-Plane Oriented Cr2O3 Thin Films Surface Grown
On Sapphire Substrates Nobuyuki IWATA, Takuji Kuroda, Kento
Norota, Yoshito Tuchiya,Yuta Watabe, Kouichi Takase, Hiroshi Yamamoto
(Nihon U., Chiba, Japan) INVITED
Preparation of Bi-Superconducting Grains Included Seed-Crystals By
Shock Compaction Hiroshi KEZUKA (Tokyo U.T., Japan), Kazuhiro
Endo (Kanazawa I.T., Japan), Mineo Itoh (Kinki U.) INVITED
Oxygen Plasma Induced Ultralong Lifetime Of Heat Sealing Effect Of
PET Films Miyoshi YOKURA, Kenichi Uehara, Guo Xiang, Akinobu
Okamoto (Mie U., Japan),Yoshinobu Nakamura (U. Tokyo, Japan),
Lakshmi Reddy (Kadapa, India), Tamio Endo (Mie U., Japan)
Increased Thermal Stability Of Multi-Walled Carbon Nanotube
Structure By Attaching CTAB Capped Zinc Oxide Nanoparticles
Manish Kumar (CSIO, Chandigarh, India), Mandeep SINGH
(Inst.Chem.Tech, Prague, Czech Rep.), Dushyant Kushavah, M.L Singla
(Chandigarh, India)
Nanocrystals-Glass Composites For Photonic Devices Shifeng Zhou, Yu Teng (Zhejiang U., Hangzhou, China), Jianrong QIU
(South China U.T., Guangzhou) INVITED
Depositions Of Proton Conductive Oxide Thin Films By Sol-Gel
Method For Fuel Cell Applications
Kiyoshi UCHIYAMA (Tsuruoka Nat. Coll Tech., Yamagata, Japan)
Scratch Resistance Of Transparent Conductive Oxide Film On
Polymer Substrate Inguna STRAZDINA, Toms Torims (Riga T.U.,
Latvia), Edmunds Macevskis,Viktors Kozlovs (Sidrabe Inc, Riga, Latvia)
Stannic Oxide Nanopowders Via The Co-Precipitation Method
Mohamed .M. RASHAD, Adel A. Ismail, I. Osama, Ibrahim A.Ibrahim
(CMRDI, Cairo,Egypt), Abdel-Hakim T.Kandil (Helwan U., Cairo, Egypt)
Session 4e GENERAL 4
Tuesday 8:00AM-10:30AM Hangzhou Room
Chairs: Tao Deng, D.D. Li, T. P. Chu, W. Taweepreda
Design And Simulation Of The Ultrasonic Spot Metal Welding Horn
Used To Improve Welding Performance Ziad Al-SARRAF (U.
Glasgow, UK)
Micro/Nanoengineered Thermal Ground Plane
Tao DENG, Shakti Chauhan, Chris Eastman, Peter De Bock, Pramod
Chamarthy, Stan Weaver (GE Global Res.Cen., Niskayuna, NY)
TiO2 Nanotubes- Applications in Nanotemplates and Photovoltaics
Dongdong LI, Dongfang Liu, Xiaohong Fang, Linfeng Lu, Changzhou
Wang, Xiaoyuan Chen (Shanghai Adv. Res. Inst., China)
Mechanical Properties Of Self Reinforced Poly(Lactic Acid) Prepared
By Compression Moulding Izan Roshawaty MUSTAPA, Robert A.
Shanks, Ing Kong (RMIT, Melbourne, Australia)
Preparation Of Short Carbon Fiber/Sic Multilayer Composites By
Tape Casting Wenshu YANG, Claudio Badini (Politec Torino, Italy), Laura
Fuso (Dronero, Italy), Sara Biamino, Claudia Vegabolivar Bolivar, Paolo
Fino (Politec Torino, Italy)
Non-Destructive Evaluation Of Carbon-Carbon Composites Using
Infrared Thermography Tsuchin Philip Chu, Jarlen Don, Yicheng Pan,
Anish Poudel (Southern Illinois U.,Carbondale)
Mixing Solid Particles in Fluidized Beds Haihong FAN, Delong Xu,
Yong Min, Hui Li, Yanxin Chen, Jinhe Fan (Xi’an U.Architecture & Tech.,
China)
Self-Assembled Nanometric Spacer on Surface of Natural Rubber
Composited with TiO2 Kritsada Phatcharasit, Wirach TAWEEPREDA
(Prince of Songkla U.,Hat-Yai, Thailand) Mon-Wed
Fabrication Of A Three Dimensional Superhydrophobic Surface
Structure And Characteristics Of Flow Past It Dongseob KIM,
Woonbong Hwang*(POSTECH, Pohang, S. Korea)
Tuesday 10:30AM-11:00AM break
Session 5a MATH 5
Tuesday 11:00AM-1:30PM Ballroom 1
Chairs: L. Tumonis, J.G. Zhai, P. Arato, Y. Zhao
Stochastic Approach To Simulation Of
Interaction Of Multi-Spherical Particles
Liudas TUMONIS (Lithuania Inst.Energy,
Kaunas), Rimantas Kacianauskas (Vilnius
Gediminas T.U., Lithuania), Algis Dziugys
(Lithuania Inst.Energy)
Application Of Indentation Fracture
Mechanics Approach For Determination Of
Fracture Toughness of DLC Coating Ceramics
Materials Yan-rong WANG, Sheikh-Md.
Rasel, Hyoun-kon Ku, Jung-il Song (Changwon
N.U., S. Korea)
Structural Analysis of Steam Surface
Condenser
Jian-Guang ZHAI (Changwon Nat.U., S. Korea),
Jong-Rae Cho (Korea Maritime U., Busan), Hua-
Hou (North U. of China, Taiyuan, China), Yan-
Rong Wang, Jung-Il Song (Changwon N.U.)
Nonlinear Static Analysis Of A Beam Made Of
Functionally Graded Materials
Julien Thivend, Habib Eslami, Yi ZHAO
(Embry-Riddle Aero U., Daytona Beach, FL)
Stress Relaxation Of Impact Damaged
Composites
Yuanjian Tong (Swansea U., UK, & Beijing
U.Chem.Tech.), David H Isaac (Swansea U.)
Contacts In Ceramic-Carbon Nanocomposites
Peter ARATO (Budapest, Hungary)
Strategies For Improving Ductility Of Bulk
Nanostructured Materials
Yonghao ZHAO (U. Shanghai Sci &Tech., UC
Davis, Calif.)
Session 5b MAGNETIC 3
Tuesday 11:00AM-1:30PM Ballroom 2
Chairs: K.K. Kamani, W..Y. Wu, Kai Liu,
H. Gong
Micro-Raman Characterization of MTMO
Grayscale Photomask
Hao Hu, Jiwei Qi, Liping Sun, Penghong Liu
(Nankai U., Tianjin, China), Qi Wang, Qian Liu
(Beijing, China), Qian Sun, Jingjun Xu,
Xinzheng ZHANG (Nankai U., China) Tues-Wed
Micro and Nano Engineering Multilayer
Polymer Complexes and Opto-Electronic
Systems
K.K. KAMANI, V. Ravindrachary, Ismayil, R.K.
Rangaswami (P.G. Center,Chitradurga, India)
Electromagnetic Property Of Polyaniline With
Different Nanostructures Doped With D-CSA
Shibu ZHU, Xiangnan Chen, Zuowan Zhou
(Southwest Jiaotong U.,Chengdu,China)
Separation of components in rice straw by
environmentally friendly processes
Mengmeng ZHAO, Man Jiang, Zuowan Zhou
(Southwest Jiaotong U., Chengdu, China)
High Energy Thermionic Electron Beam for
Material Surface Modification
Munawar IQBAL, Haris Rashid (U. Punjab,
Lahore, Pakistan)
Chirality Control And Vortex Manipulation In
Nanomagnets Kai LIU, Randy K. Dumas,
Dustin A. Gilbert, Nasim Eibagi (UC Davis,
Calif.) INVITED Mon-Wed
Photoluminescence and Raman Analysis of
Ge-Rich SiGe Nanowires
Hua GONG, Yingjie Ma (Fudan U., Shanghai,
China), Peixuan Chen (IFW Dresden,Germany),
Lijun Wang (Acad Sci, Beijing, China), Armando
Rastelli (IFW Dresden),
Zuimin Jiang, Zhenyang Zhong (Fudan U.,
Shanghai)
Session 5c INFRA 3
Tuesday 11:00AM-1:30PM Ballroom 3
Chairs: M. Osmani, K. Liu, L. Ding, Z.Y. Sun
Recycling Optimisation Of Concrete
Composites: An Experimental Study
Mohamed OSMANI (Loughborough U., UK)
Fibrous Brucite and Polypropylene Hybrid
Fibers Reinforced Concrete
Kaiping LIU, Jiuran Wen, Zhihua Sun, Zhenjun
Wang (Chang’an U., Xi’an, China),Luciano Feo
(U. Salerno, Italy), D. Hui (U. New Orleans)
Reliability-Based Design Optimization Of
Adhesive Bonded Steel-Concrete Composite
Beams Yangjun Luo (Northwestern Poly U.,
Xi’an, China), Alex LI (U. Reims, France)
Durability Study Of BFRP Bars Immersed In
Water And Alkaline Solution Jingyu WU,
Guijun Xian, Hui Li (Harbin I.T., China)
Application Of DIC Method In Strain
Measurement Of FRP Adhesive Joint
Jiawei SHI, Hong Zhu, Zhishen Wu (Southeast
U., Nanjing, China)
Confinement Effectiveness of CFRP Grids of
Concrete Columns
Lining DING (Southeast U., Nanjing, China),
Sami Rizkalla (N. Carolina St.U., Raleigh), Gang
Wu, Zhishen Wu (Southeast U., Nanjing, China)
Performance of Concrete Columns Reinforced
by Steel-FRP Composite Bar under Static
loading and Dynamic Excitation
Ze-Yang SUN, Gang Wu, Sheng-Ze Yang,
Zhi-Shen Wu (Southeast U., Nanjing, China)
Enhancement of Basalt FRP by Hybridization
For Long-Span Bridges
Xin Wang, Zhishen WU (Southeast U., Nanjing,
China)
Session 5d BIO 2
Tuesday 11:00AM-1:30PM Dalian Room
Chairs: M. Watanabe, J. Lisal, M. Fan, P. Duchek
PLA-Silk Fiber Composites for Biomedical Applications
H.Y. Karen CHEUNG, A. Collier, J. Dean, B Stearn, T.W. Clyne
(Cambridge U., UK) Tues-Wed
Modeling And Simulation For Microbial Depolymerization Of
Polyethylene Glycol Masaji WATANABE (Okayama U., Japan), Fusako
Kawai (Kyoto I.T., Japan)
Replacement Of Local Osteochondral Defects As Hybrid Bio-
Composite Jaroslav LISAL, Miroslav Petrtyl (Czech T.U>, Prague),
Zdenek Bastl (ASCR), Ladislav Senolt (Charles U., Prague), Zdenek
Krulis (ASCR), Pavel Cerny (Ortotika, Ltd. Czech Rep.)
Nano Technology Modification Of Natural Fibres For Bio-Composites
Dasong DAI, Mizi Fan (Brunel U., UK)
Shape Optimization Of Fiber In Biomaterials
Petr P. PROCHAZKA, Martin J. Valek (Czech T.U., Prague)
Use Of Acetylated Starches In Biodegradable Plastics And Composites
With Montmorillonite Petr DUCHEK, Jan Schubert (U. West Bohemia,
Czech Rep.)
Nanoscale Reinforcement Of Light Weight Bio-Based Foams Using
Rice Straw Nanofibers Chularat KRONGTAEW, Saniwan Srithongkham,
Lalita Vivitchanont. Siritorn Nakchamnan (Mahidol U., Nakorn Pathom,
Thailand)
Session 5e GENERAL 5
Tuesday 11:00AM-1:30PM Hongzhou room
Chairs: C.W. Lee, S.M. Mukhopadhyay, W. Nawrocki, C.H. Chen
Using Quality Tools to Reduce Surface Depression Defect on Composite
Panels M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Khairul Bakhtiar b
Baharim (U. Malaysia Perlis)
Development Of Nanocomposite Mold Insert For Microfabrication Of
Polymeric Microfluidic Devices R.K. Jena, CheeYoon YUE, Y.C. Lam
(Nanyang T.U., Singapore)
Transparent Superhydrophobic Surface With Self-Cleaning Effect
Changwoo LEE, Kyungjun Lee, Sungnam Lyu, Sangmin Lee (Pohang
U.Sci.Tech., S. Korea),Youn Sang Kim, Woonbong Hwang (Seoul N.U., S.
Korea)
A Case Study On BIM Based Building Energy Evaulation
Sang-Tae NO (ChungJu Nat. U., S. Korea) Tues-Wed
Fiber-Optic Communication For Vehicles, Airplanes And Vessels
Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel
(Esslingen U. App. Sci., Germany)
Multifunctional Hybrid Structures for Energy and Environmental
Applications Hema Vijwani, Adam Maleszewski, & Sharmila M.
MUKHOPADHYAY (Wright St.U., Dayton, OH) Mon-Wed
Towards The Quantum Limits In Scaling Of Electronic Devices
Waldemar NAWROCKI (Poznan U.T., Poland)
Glass Fiber Reinforced Vinyl Ester Containing Nano-Al2O3 Composites
for Pultrusion: Process Feasibility and Kinetic Analysis Chin-Hsing
CHEN (Chinese Culture U.,Taipei), Yun-Yun Sun (Tung Fang Design U.,
AOHSIUNG), Yih-Chern Juang (Chinese Culture U.)
1:30PM-2:30PM Lunch
Session 6a MATH 6
Tuesday 2:30PM-5:30PM Ballroom 1
Chairs: C.S. Chong, G.A. Chang, Y. Liang, F.
Boussu
Numerical Method for Calculating Load
Distribution in Multi-Bolt Thick Laminate
Joints W.X. Liu, Longquan LIU, R. Wei
(Shanghai Jiaotong U., China)
Response Of Beam Due To Impact Load
CheeSiang CHONG, Kameswara Rao N.S.V. (U.
Malaysia Sabah)
Free Vibration of Composite Plates Subjected
to Magnetic Field and Temperature Gradient
Ohseop SONG, Sung-Kyun Kim, Jong-Woon
Choi, Young-Jun Kim, Sang-Yun Park
(Chungnam N.U., Daejeon, S. Korea) Tues-Wed
Using Taguchi Method To Improve Composite
Materials Learning – MSU Example
Guanghsu A. CHANG (Minnesota St.U.,
Mankato)
Fluid-Structure Interaction Analysis Of
Pulsatile Flow In A Layered Anisotropic
Aortic Wall Ying LIU, Shuai Yang
(Beijing Jiaotong U., China)
Delamination Detection In Composite
Laminates By Ultrasonic Guided Wave
Yue LIANG (Penn St.U.), Fei Yan (FBS,
St.Coll., PA), Cody Borigo, Joseph. L. Rose
(Penn St.U.)
Degradation Measurement Of Fibrous
Reinforcement Inside Composite
Material
Marie Lefebvre, Francois BOUSSU, Daniel
Coutellier (U. Lille Nord de France)
Session 6b MAGNETIC 4
Tuesday 2:30PM-5:30PM Ballroom 2
Chairs A. Lappas, A.E. Eken, D. Bhongsuwan, P.
Mueller-Buschbaum Pyroelectric Nano-Composite Thin Films
Shlomo BERGER, Nitzani (Technion, Israel) Mon-Wed
AB Initio Study Of Structural And Electronic
Properties Of InN/Si And GaN/Si Interfaces
Ilya V. MUTIGULLIN, K.K. Abgaryan (RAS, Moscow), D.I. Bazhanov (Moscow St.U.), O.V.
Stepanyuk (RAS)
Exchange Bias In Hybrid Nanocrystals Of Zinc
Oxide Alexandros LAPPAS (IESL-FORTH,
Heraklion, Greece), Athanasia Kostopoulou (IESL-
FORTH and U. Crete, Greece), Franck Thétiot (IESL-FORTH), Ioannis Tsiaoussis (Aristotle U.), Maria
Androulidaki (IESL-FORTH), Pantaleo Davide Cozzoli
(Inst. Nanoscience, Lecce, Italy). Mon-Wed
A Simulation Study On The Effects Of Nanotube
Anisotropy And Non-Straightness On The Electrical
Properties Of Carbon Nanotube/Polymer
Composites
Ali Erdem EKEN (TU Hamburg-Harburg, Germany),
E.J. Tozzi (UC Davis, Calif.), D.J. Klingenberg (U.
Wisconsin-Madison), W.
Effect Of Calcination Temperature In Production
Of Magnetic Nanoparticles For Arsenic Adsorption
Darunee BHONGSUWAN, Tripob Bhongsuwan,
Nucharee Chomchoey, Lakkana Boonchuay (Prince of
Songkla U., Thailand) Mon-Tues
Theory Of Electrostatic Interaction Between
Polymer-Coated Composte Particles
Hiroyuki OHSHIMA (Tokyo U. Sci, Japan)
Sol-Gel Templated Titaniumdioxide Films for Solar
Cell Applications Peter MUELLER-Buschbaum,
Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar, Philipp Lellig (Max-Planck, Mainz, Germany), Jochen
S. Gutmann (U. Duisburg-Essen)
Enhanced Optical Transparency In 3D
Nanostructured Films
Bernardo S. MENDOZA (CIO-Mexico), W. Luis Moch´an (ICF-UNAM-Mexico),Guillermo P. Ortiz
(Univ. Nac. del Nordeste, Argentina)
Session 6c INFRA 4
Tuesday 2:30PM-5:30PM Ballroom 3
Chairs: M.H. Baaghban, L. Feo, J.L. Wang,
S.J. Han
Bond Characteristic Of FRP Embedded In
Concrete For Retrofit Of Reinforced Concrete
Structure Soo-Yeon SEO (Chungju Nat.U., S.
Korea), Luciano Feo (U. Salerno, Italy), David
Hui (U. New Orleans) Tues-Wed
An Experimental Investigation on Internal
Hydrophobation of Cement Based Materials
Mohammad H. BAGHBAN, Per Jostein Hovde,
Stefan Jacobsen (Norwegian U. Sci. Tech.)
Environment-Assisted Subcritical Debonding
Of Epoxy-Concrete Interface
Jialai WANG, Chao Zhang, Ken Fridley (U.
Alabama, Tuscaloosa)
Estimation Of Nominal Moment Of
Reinforced Concrete Members Strengthened
With FRP Baik-Soon CHO, Young-Soo
Chung, Yeon-Wook Kim, Eunsoo Choi, Sangsoo
Jeon (Inje U., Gyeongnam, S. Korea)
Development of High-Performance Fiber-
Reinforced Cementless Composite Mortar
Hyun-Jin LIM, Chang-Geun Cho (Chosun U.,
Gwangju, S. Korea)
Seismic Strengthening of Reinforced Concrete
Columns by Applying Steel Fiber-Reinforced
Cementitious (SFRC) Mortar
Sung-Jin HAN, Chang-Geun Cho,Eui-Sik Kim
(Chosun U., Gwangju, S. Korea) Seismic Performance Improvement of RC Columns
by Applying High-Performance Fiber Cementitious
Mortar Chang-Hwan PARK, Chang-Geun Cho,
Jeong-Sup Kim (Chosun U., Gwangju, S. Korea, David Hui (U. New Orleans)
Influence Of Concrete Skin On De-Icing Salts
Resistance Pavel REITERMAN, Karel Kolar, Michaela Kostelecka, Ondrej Holcapek (Czech T.U.,
Prague)
Session 6d NANO 2
Tuesday 2:30PM-5:30PM Dalian Room
Chairs: C. Hin, Q.F. Chen, N. Daud, Y.L. Guo
Formation Of Oxide Nanoclusters In Nanostructured Ferritic Alloys
During Anisothermal Heat Treatment Celine HIN (Mass Inst Tech,
and UC Berkeley) , B.D. Wirth, J.B. Neaton (UC Berkeley, Calif.)
INVITED 25 min
Facile Preparation Of Graphene/Poly(Butylene Succinate)
Nanocomposites With Enhanced Behaviors Yuan HU, Lei Song, Xin
Wang (U. Sci.Tech. of China, Hefei, Anhui)
Issues about Strength of Nanofiber Reinforced Composites Quanfang
CHEN (U. Cen. Florida, Orlando)
Design, Preparation, Performance, Industrialization And
Application Of Advanced Clay/Rubber Nanocomposites Liqun
ZHANG, Youping Wu, Yiqing Wang, Yonglai Lu, Ming Tian
(Beijing U. Chem. Tech., China)
Centrifugally Compacted Nanosilica – TALC/Calcium
Carbonate Polyacrylate Composites Norlinda DAUD, Robert A.
Shanks, Ing Kong (RMIT, Melbourne, Australia)
Glass Transition Temperature And Structural Relaxation Of
Polymer Nanoparticles Under Soft And Hard Confinement
Yunlong GUO, Chuan Zhang, Christine Lai, Rodney Priestley
(Princeton U., NJ) Mon-Wed
Carbon Nano Coil Synthesized On Zero-Dimensional Silica
Huy-Zu CHENG, Chang-Cheng Su, Tin-You Chen, Guo-Ju Chen,
Kuo-Jung Lee (I-Shou U., Kaohsiung)
Session 6e GENERAL 6
Tuesday 2:30PM-5:30PM Hangzhou Room
Chairs: P. Bele
Session on Novel Catalysts and Support Materials for Fuel Cells
developed by Petra Bele (TU Munich, Garching, Germany) Synthesis, Structure, and Reactivity of Dealloyed Bimetallic PtM3 Fuel Cell
Cathode Electrocatalysts Mehtap Oezaslan, Stefan Rudi (TU Berlin, Germany),
Zengcai Liu (Oak Ridge N.L., TN), Peter STRASSER (TU Berlin, Germany, Oak
Ridge N.L., TN) Tues-Fri
Behaviour of Core Shell Nanoparticle Catalysts in the PEMFC Environment
Sarah BALL (Johnson Matthey Tech., Sonning Common, UK)
Synthesis And Characterization Of Nanocatalysts For The Direct
Electrooxidation Of NaBH4 In A Solid Alkaline Membrane Fuel Cell
Christophe COUTANCEAU, M. Simoes, S. Baranton (U. Poitiers, France)
Graphene Composites as the Cathode Catalyst for Oxygen Reduction in Fuel
Cells Xiaoyan Yan (Tauyuan U. Sci. Tech., China), Xili Tong, Yingyong Wang,
Guoqiang Jin, Xiangyun GUO (G.U. Chinese Academy of Sciences, China)
Functionalized Carbon Nanotubes And Anode Degradation In High
Temperature PEM Fuel Cells A. Orfanidi, M.K. Daletou, S.G. NEOPHYTIDES
(Hellas Inst., Patras,Greece)
Alternative Support Materials And The Role Of The Support Morphology For
The Electrode Structure S. Zils (TU Darmstadt, CRP Henri Tudor, Luxembourg),
P. Bleith, F. Ettingshausen (TU Darmstadt), J. Suffner (TU Darmstadt, KIT
Karlsruhe, Germany), A. Wolz , M. Michel (CRP Henri Tudor, Luxembourg), Christina ROTH (TU Darmstadt, KIT Karlsruhe, Germany)
Nano-Sized Perovskite-Type Oxide / Carbon Nanotube Composites For An
Oxygen-Reducing Electrocatalyst Kohei MIYAZAKI, Tomokazu Fukutsuka, Takeshi Abe, Zempachi Ogumi (Kyoto U., Japan)
Metal-Oxide Based Supports For Electrocatalysis In Proton-Exchange
Membrane Fuel Cells Frederic MAILLARD, F. Micoud (Grenoble-INP, France), A. Bonnefont (U. Strrasbourg, France), M. Chatenet (Grenoble-INP, France)
The Effect Of Metal Oxide-Carbon Support On Electrocatalysts For Fuel Cell
Reactions B. Ruiz-Camacho (U. Poitiers, France), M.A. Valenzuela (ESIQIE, Mexico), Nicolas ALONSO-VANTE (U. Poitiers, France)
Degradation Studies of OMC Supported Pt Electrocatalyst for PEMFC
Application In Acid Electrolyte Juqin ZENG, Carlotta Francia, Stefania Specchia, Paolo Spinelli (Politec Torino, Italy)
Nano-Electrocatalysts Based On Carbon Nitride Supports For The Orr And For
In Pem Fuel Cells Vito DiNOTO, Enrico Negro (U. Padova, Italy) POSTER
Session 7a MATH 7
Tuesday 6:00PM-9:00PM Ballroom 1
Chairs: D. Jia, S. Lin, A. Boczkowska, Z. Chen
Effect Of Porosity On The Mechanical
Properties Of YSZ/NiO Composite Anode
Materials Dan JIA, Aixi Zhou (U. North
Carolina-Charlotte),Yang Ling, Ke An, A.D.
Stoica,Xun-Li Wang (Oak Ridge N.L., TN)
Mechanical Characterization And Finite
Element Modeling Of NBR And PDM For
Directional Drilling Henry K. GONZALEZ,
Jianren Zhou, Shield Lin
(Prairie View A&M U., TX)
Shape, Displacement And Strain
Measurements By Sampling Moire Method
Yoshiharu MORIMOTO (Moire Inst. Osaka,
Japan), Motoharu Fujigaki, Akihiro
Masaya(Wakayama U., Japan) INVITED 25 min
Thermal Stability Analysis Of Tapered Fgm
Annular Plates Under Nonuniform
Temperature Distribution- A Finite Element
Approach Mansour Mohieddin Ghomshei,
Vahid Abbasi (Islamic Azad U., Iran)
Effect Of The Microstructure On The
Properties Of Ceramic–Elastomer Composites
With 3D Connectivity Of Phases
Anna BOCZKOWSKA (Warsaw U.T., Poland)
Thermomagnetoelastic Behavior Of A
Rotating Functionally Graded Hollow
Cylinder Zengtao CHEN, A. Hamid Akbarzadeh
(U. New Brunswick, Canada)
The Effect Of Stoichiometric Ratio Of Curing
Agent On The Mechanical Properties Of
Epoxy Resins Peng WANG, Gang Sui,
Xiaoping Yang (Beijing U. Chem Tech.,China)
Session 7b METAL 2
Tuesday 6:00PM-9:00PM Ballroom 2
Chairs: P.F. Mensah, Q.H. Xu, J.H. Lee, J.Y. Jin
Mechanical Properties Of Hot Corrosion
Tested APS And EB-PVD Multilayer Thermal
Barrier Coatings Using Nano Indentation
Ravinder M. DIWAN, Patrick F. Mensah, Naresh
Polasa (Southern U., Baton Rouge, LA), Douglas
E. Wolfe (Penn St.U.) Mon-Tues
Coupled Metal Nanoparticles with Enhanced
Optical Properties and Their Applications
Zhenping Guan, Polavarapu Lakshminarayana,
Cuifeng Jiang, Qing-Hua XU (Nat. U. Singapore)
Properties Of Tin Thin Films Deposited Onto
β-TYPE Ti-14Mo-3Mb-3Al-0.2Si Alloy
Substrates At Various Processing
Temperatures By Reactive Magnetron
Sputtering Jun Hee Lee, A. Joseph Nathanael,
Sun Ig Hong (Chungnam Nat. U., Daejeon, S.
Korea) Mon-thurs noon
Creep deformation behaviors of Zr-Nb-Sn-Fe
alloy tubes Jong-Min LEE, Eun-Kyu Lee and
Sun Ig Hong (Chungnam Nat. U., Daejeon, S.
Korea) Mon-thurs noon Mechanical and Microstructural Analyses of Cu-
15at% Ag Nanocomposite Processed By High
Pressure Torsioning KiHwan OH, HoByung Kim,
SunIg Hong (Chungnam Nat. U., Daejeon, S. Korea)
Mon-thurs noon
Nanotubes Formation on Ti-6Al-4V and Zr-1Nb
Alloys Through Anodization And Its
Biomineralization Analysis Ju-Young JIN, A.J. Nathanael, S.I. Hong(Chungnam Nat. U., Daejeon, S.
Korea) Mon-thurs noon
Effect Of Heat Treatment On The Mechanical
Response And Fracture Behavior In STS304/Al1050/STS439 Clad Material Jun-Young
SONG, In-Kyu Kim, Sun Ig Hong (Chungnam Nat. U., Daejeon, S. Korea) Mon-thurs noon
Effect Of Alloying On The Deformation Behavior
And Slip Mode Of Cu-16at%Al Single Crystals At
Various Temperatures JongSu HA, SunIg Hong
(Cheungnam Nat. U., Daejeon, S. Korea) Mon-thurs
noon
Session 7c COMPOSITES 1
(miscellaneous) Tuesday 6:00PM-9:00PM Ballroom 3
The Evaluation Of Mechanical And Thermal
Properties Of Blended Cement Concrete XiaoYong WANG, HyeongKyu Cho, HanSeung
Lee (Hanyang U., Ansan, S. Korea)
A Study On The CO2 Balance Evaluation Of
Building And Civil Engineering Structures HyeongKyu CHO, Hun Song, HanSeung Lee
(Hanyang U., Ansan, S. Korea)
Electrospun Nanofibers For Artificial
Scaffolds And Reinforcement Of Rubbers
Ulrike Wangenheim, Ulrich Giese, Robert H.
SCHUSTER (DIK, Hannover, Germany)
Study On Estimating Compressive Strength
And Physical Characteristic Of Structural
Lightweight Concrete With Foam Agent TaeBeom MIN, Hanseung Lee (Hanyang U.,
Ansan, S. Korea), Luciano Feo (U. Salerno,
Italy), David Hui (U. New Orleans)
Detection and Characterization of Kissing
Debonds in Composite Adhesive Joints using
Digital Image Correlation
R L Vijaya KUMAR, C R L Murthy, M R Bhat
(Indian Inst.Sci., Bangalore)
Selective Encapsulation of Dye Molecules in
Dendrimer/Polymer Multilayer Microcapsules
by DNA Hybridization Chuan-Liang FENG,
Qinglei Liu, Wang Zhang, Jiajun Gu, Shenmin
Zhu, Di Zhang (Shanghai Jiao Tong U., China)
Development Of Radiation Shielding Concrete
Utilzing Electronic Arc Furnace Oxidizing
Slag Heeseob LIM, Hanseung Lee, Jaeseok
Choi (Hanyang U., Ansan, S. Korea)
Session 7d NANO 3
Tuesday 6:00PM-9:00PM Dalian Room
Chairs: J.M. Bai, M. Auslender, C. Harishkumar, S.V. Roth
Processing and Characterisation of a Polyamide 12-Carbon Nanotube
Composite by Laser Sintering Jiaming BAI, Ruth Goodridge, Richard
Hague, Mo Song (Loughborough U.,UK)
Optical Properties of Silica Opal Templates in the Visible and Infrared
Mark AUSLENDER, Shlomo Hava (Ben-Gurion U., Israel)
Atomic Layer Deposition and Template Replication for
Nanotechnology Engineering Diefeng GU, Gon Namkoong, Helmut
Baumgart (Old Dominion U., Norfolk, VA)
Comparing The Effect Of Nano-CaCO3 And Nano-ZnO On
Rheological Properties Of Polypropylene Using Several Models
Hassan EBADI-Dehaghani (Islamic Azad U.,Iran)
Multifunctional and Specific Interactions of MWCNT and Polymer As
Decisive Parameters For High Performance Of Nanocomposites
Chougule HARISHKUMAR,Ulrich Giese, Robert H. Schuster (DIK,
Hannover, Germany) In Situ µGISAXS Investigation of Gold Sputter Deposition onto Mesoporous
Polymer Templates. Matthias SCHWARTZKOPF, Adeline Buffet (DESY,
Hamburg,Germany), Volker Koerstgens (TU Muenchen), Kai Schlage, Jan
Perlich,Andre Rothkirch (DESY), Gunthard Benecke (DESY), Ezzeldin Metwalli (TUMuenchen), Mottakin M. Abul-Kashem, Gerd Herzog (DESY), Peter Mueller-
Buschbaum (TU Muenchen), Ralf Roehlsberger, Rainer Gehrke, Stephan V. Roth
(DESY, Germany)
Tailoring Functional Polymer-Metal Nanocomposites Via Sputter Deposition
Stephan V. ROTH, Adeline Buffet, Mottakin Abul Kashem, Gunthard
Benecke,Rainer Gehrke, Gerd Herzog (DESY, Hamburg, Germany), Volker Koerstgens (TU Muenchen), Jan Perlich (DESY), Monika Rawolle (TU Muenchen),
Ralf Roehlsberger, Andre Rothkirch, Kai Schlage, Matthias Schwartzkopf
(DESY),Peter Mueller-Buschbaum (TU Muenchen)
Nanoindentation Behavior of Naturally Layered Materials
Jianhong Zhang (Tsinghua U., China), Zhongxin Wei, Guoping Zhang (Louisiana
St.U.)
Session 7e GENERAL 7
Tuesday 6:00PM-9:00PM Hangzhou Room
Chairs: M.C.S. Ribeiro, M. Zou, M. Ghatus, H. Wong
Monolayer Molecular Doping For Cost-Effective Photovoltaics
Fei XIU (City U. Hong Kong, China), Miao Yu (Hong Kong UST), Johnny
C. Ho (City U. Hong Kong), Zhiyong Fan (HKUST)
Synthesis and Characterization of Cathode Material for Li-ion
Batteries Umair NISAR, Q.J. Khattak (GIK Inst., Topi, Pakistan), Mohsin
Saleem, R.A. Shakoor (KAIST, DAejeon, S. Korea), Ali Hussiana,
F.A.Khalid (GIK)
Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential
Application for Micro Surface Mounted Components Awad Kh. Al-
ASMARI (AlKharj U., Saudi Arabia)
Experimental Study On Polyester Based Concretes Filled With Glass
Fibre Reinforced Plastic Recyclates -A Contribution To Composite
Materials SustainabilityM.C.S. RIBEIRO, A. Fiuza, M.L. Dinis (U. Porto,
Portugal), A.C.M. Castro, F.G. Silva, J.P. Meixedo, M.R. Alvim (Polytech.
Porto, Portugal)
Tribological Properties of Quantum Dot/PMMA Nanocomposite Films
Min ZOU, Alex Arguelles (U. Arkansas, Fayetteville), Y. Andrew Wang
(Ocean NanoTech, Springdale, AR)
Experimental Investigation of the Performance of Fiber Reinforced
EPDM for Automotive Radiator Hoses Mehdi GHATUS (Lawrence
T.U., Southfield, MI), Chris Kargula (Auburn Hills, MI), Chris Riedel
(Lawrence T.U.)
Preparation Of Dielectric Embedded Silicon Nanocrystallites For Flash
Memory Applications H. WONG, O.Y. Wong, J. Liu (City U., Hong
Kong, China)
Special Technology For Industrial Production Of Sandwiches From
Metals Mark R. LIBERZON (Moscow St. Aviation T.U., Russia)
Session 8a MATH 8 Wednesday 8:00AM-10:30AM Ballroom 1
Chairs: R. Mohan, A. Mori, S. Zhou, G. Li
Precipitation In Alloys: A Kinetic Monte Carlo
And Class Model Study
David BOMBAC, Goran Kugler (U. Ljubljana,
Slovenia)
Modeling And Analysis Of Dynamic Crack
Propagation In A Nanoscale Bi-Layer Metallic
Composite Ram Mohan, Yojna Purohit (NCAT,
Greensboro, NC)
Buckling And Postbuckling Behavior Of
Laminated Stringer Stiffened Composite
Cylindrical Panels Haim ABRAMOVICH
(Technion, Israel)
Monte Carlo Simulation Of Defects In Hard-
Sphere Crystal Grown On A Squsre Pattern
Atsushi MORI, Yoshihisa Suzuki, Shigeki
Matsuo (U. Tokushima, Japan)
Characterization Of Fluid Dynamic
Properties Of Schwarz’s Primitive Cellular
Materials Che-Cheng Chang, Shewei ZHOU,
Yuhang Chen, Qing Li (U. Sydney, Australia)
Prediction of Mechanical and Barrier
Properties of Chlorobutyl Rubber/Natural
Rubber Blend using Artificial Neural
Networks Lin LI, Jin Zhang, Z X Zhang, Jin
Kuk Kim
(Gyeongsang Nat. U., S. Korea)
On Particle Impact Induced Bond
Breaking Of Single-Walled Carbon
Nanotubes Puroorava Chakravarthy, Gang
LI (Clemson U., SC)
An Experimental Metodology And
Apparatuses To Perform Impact Tests In
Composite Laminate Plates Eduardo
Henrique deCASTRO Biase, Mauricio
Vicente Donadon (Sao Jose Campos,
Brazil)
Session 8b METAL 3
Wednesday 8:00AM-10:30AM Ballroom 2
Chairs: H.B. Kim, Y.T. Liu, S.S. Lian,
M. Suszynska
Effect of Interfacial Reaction Layer On The
Cracking Behavior in 3-ply Mg/Al/STS Clad-
Metal In-Kyu KIM, Jun-Young Song, SunIg
Hong (Cheungnam Nat. U., Daejeon, S. Korea)
Mon-thurs noon
Microstucture and Mechanical properties of
Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Processed by
HPT (High Pressure Torsioning) Ho-byung
KIM, Ki-Hwan Oh, Sun Ig Hong (Cheungnam
Nat. U., Daejeon, S. Korea) Mon-thurs noon
Oxidation and Mechanical Properties of Zr-
1Nb-1Sn-0.1Fe Alloys At High Temperatures
EunKyu LEE, JongMin Lee, SunIg Hong
(Cheungnam Nat. U., Daejeon, S. Korea)
Mon-thurs noon
The Improvement Of Oxidation Behavior Of
Powder Metallurgy Made Fe-Cr Alloys
Yen-Ting Liu, Shuang-Shii LIAN (Nat. Taiwan
U., Taipei), Wei-Ja Shong, R.Y. Lee (INER)
Structure And Hardness Of Copper-Doped
Soda-Lime Silica Glass
Maria SUSZYNSKA (PAS, Wroclaw, Poland)
Control Of Structure And Properties Of
Welded Connections Of Medium Alloy Steels
By Application Highly Concentrated Pulse
Energy Actions A.A. DEMYANCHENKO, Yu
N. Saraev (RAS, Tomsk, Russia)
Adaptive Pulse Technological Processes Of
Welding And Pad Weld Is A New High-
Performance Method Of Obtaining Of
Permanent Joints Of High-Strength Steels
Yu N. SARAEV (RAS, Tomsk, Russia)
Session 8c CHEM 3
Wednesday 8:00AM-10:30AM Ballroom 3
Chairs: A. Mori, K. Nakane, M. Kikuchi
Z. Zhuang
Session on Materials Chemistry
developed by Atsusi Mori (TokushimaU., Japan)
and Masanori Kikuchi (NIMS, Japan)
Formation And Properties Of Poly(Vinyl
Butyral)-Zirconia Hybrids Koji NAKANE,
Kosuke Mizutani, Ruonan Zhang, Nobuo Ogata
(U. Fukui, Bunkyo, Japan)
Step Velocity On The {110} Faces Of
Tetragonal Lysozyme Crystals Under High
Pressure Takahisa FUJIWARA, Yoshihisa
Suzuki (U. Tokushima, Japan), Gen Sazaki
(Hokkaido U., Japan), Shin-ichiro Yanagiya,
Katsuhiro Tamura (U. Tokushima) Microfluidic Fabrication Of Colloidal Crystal Films
And Spheres
Toshimitsu KANAI (Yokohama Nat. U., Japan)
Enlargement Of Grains Of Silica Colloidal Crystals
By Centrifugation With An Inverted-
Triangle Shaped Container KaoriHASHIMOTO,
Yoshihisa Suzuki, Atsushi Mori, Shin-ichiro Yanagiya,
Katsuhiro Tamura (U. Tokushima, Japan) INVITED
Observation Of Mobile Lattice Defects In A
Colloidal Crystal Makiko SAKABE, Yoshihisa
Suzuki, Takahisa Fujiwara, Atsushi Mori, Shin-ichiro
Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)
Preparation Of Injectable Artificial Bone
Fabricated From Hydoxyapatite / Collagen
Nanocomposite Akinori Kochi (Okayama U., Japan), Masanori KIKUCHI (NIMS, Tsukuba, Japan), Yuki
Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka
(Okayama U., Japan)
Fabrication Of Calcium-Phosphate Cements From
Hydroxyapatite Powders Surface-Modified With
Various Concentrations Of Sodium Inositol
Hexaphosphate And Their Material Properties
Toshiisa KONISHI, Minori Mizumoto, Michiyo
Honda(Kanagawa Acad Sci Tech., Japan), Zhi Zhuang, Mamoru Aizawa (Meiji U., Japan)
Ultrastructural Analysis Of Synthetic
Hydroxyapatite With Preferred Orientation To C-
Plane Using High-Resolution Transmission Electron
Microscopy Zhi ZHUANG, Mamoru Aizawa (Meiji
U., Japan)
Session 8d TEXTILE 2
Wednesday 8:00AM-10:30AM Dalian Room
Chairs: Y.Q. Wang, H. Zulkafli, G. Rizvi, T. Ai
Mechanical Properties of Carbon Fabric-Phenolic Resin Composite
Using Carbon Nanotubes Yi-qi WANG, Joon-hyung Byun, Cheon Won,
Zhi-peng Hui, Jung-il Song (Changwon N.U., S. Korea)
Rubber Toughening Of Polylactic Acid Mohd BIJARIMI, A. Sahrim, R.
Rasid (U.Kebangsaan, Malaysia), H. Zulkafli(U. Malaysia Pahang)
Nanoindentation Characteristic of Nanoclay/ Rubber Toughened-UPE
Nanocomposite. S.N SURIP (U.T. MARA, Shah Alam, Malaysia), Z.Y
Zhang, H.N. Dhakal (U. Portsmouth, UK), N.N. Bonnia (U.T. MARA)
Properties Enhancement of PLA-Natural Fibre Composites Using An
Ethylene Copolymer Maryam Talimi, Ghaus RIZVI (Univ.Ontario Inst.
Tech.,Oshawa,Canada) Mon-Wed PM
A Simple Constitutive Model For Plain-Woven C/SiC Composites
Jun LI, Guiqiong Jiao, BoWang,ChengpengYang, Shifei Liang
(Northwestern Polytech.U., Xi’an, China)
Prediction Of Kink Band Formation In 3D Textile Glass Fiber
Composites Using A Multi-Scale Modeling Strategy
Dianyun ZHANG, Anthony M. Waas (U. Michigan), Chian-Fong Yen, Seth
Ghiorse (US Army. Aberdeen P.G., MD)
Modeling The Stress-Strain Behavior Of Triaxially Braided
Composites Xinran XIAO, Christopher Cater (Michigan St.U.)
Effect Of Surface Modification Of Kevlar Stitch Threads On
Interfacial Hydrothermal Properties Of Carbon Fiber Reinforced
Epoxy Stitched Composites Tao AI (Chang'an U., Xi'an, China), Rumin
Wang (Northwestern Poly U., Xi'an, China), Jie Deng (Aerospace Comp.
Mat. Res. Inst., Xi'an, China)
Session 8e GENERAL 8
Wednesday 8:00AM-10:30AM Hangzhou Room
Chairs: O. . Zheng, Strobel, J. Lu, R. Artiaga
session on Optical And Related Microwave Communication
developed by Otto Strobel (Esslingen U. App. Sci., Germany) Wed-Thurs
Optical And Microwave Communication Using New Materials – An
Overview Otto STROBEL, Elke Dietrich (Esslingen U. App Sci,
Germany), Jan Lubkoll(Erlangen Friedrich-Alexander U., Germany)
Fiber-Optic Communication For Vehicles, Airplanes And Vessels
Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel
Development Of A Correlation Speed Measurement For Automotive
Applications Christian BETZ (Esslingen U. App. Sci., Germany),
Vladimir V. Rastorguev (Moscow Aviation Inst., Russia), Otto Strobel
Enhancing Modern Mobile Communication Systems Using Tunable
Components Made Of Material Utilized In New Fields Of Application
Kira KASTELL (U. App. Sciences, Frankfurt, Germany)
Nanomaterials for Tunable Passive Microwave Devices Yuliang
ZHENG, A. Gaebler, M. Koeberle, R. Jakoby (T.U. Darmstadt, Germany)
The Complex Permittivity And Permeability Of PMMA/Fe3O4 NPS/Ag
NPS Composites In The Microwave Range WenHsien Sun (Ind.Tech
Res. Inst.Hsinchu), DungShing HUNG (Ming Chuang U., Taipei), Tsing
Tang Song (ITRI, Hsinchu), Shang Fan Lee (Academia Sinica, Taipei)
Using Microwave Transmission to Detect Decay in Wood
Graham BRODIE, Berhan Ahmed (U. Melbourne, Australia), Mohan V.
Jacob(James Cook U., Australia)
Temperature Modulation In Pressure DSC: A New Tool To Investigate
The Pressure Effect On The Curing Ramon ARTIAGA, Carlos Gracia,
Jorge LOpez-Beceiro, Silvia Gomez-Barreiro, Javier Tarrío-Saavedra
10:30AM-11:00AM Coffee Break
Session 9a MATH 9
Wednesday 11:00AM-1:30PM Ballroom 1
Chairs: Y. Hong, J.S. Song, Y. Feng, B.P. Ronge
Identifying Material Properties Of Composite
Materials From Vibration Data
Zubaidah Ismail (U. Malaya, Kuala Lumpur),
Henry Khov, Wen L. LI (Wayne St.U., Detroit,
MI)
Divergence Of Composite Aircraft Wings
Accounting The Aerodynamic Finite-Span
Effect Yan HONG, Zhanming Qin (Xi’an
Jiaotong U., China)
Nonlinear Dynamics And Vibrations For
Geometrically Nonlinear Composite Aircraft
Wings Ji-seok SONG, Hwanhee Lee, Seog-Ju
Cha, Sungsoo Na (U. Korea, Seoul),Zhanming
Qin (Xi’an Jiaotong U., China)
Internal Resonance Of Composite Sandwich
Panels With Transversely Compressible Core
Yizhe FENG, Zhanming Qin, Guiping Zhao
(Xi’an Jiaotong U., China)
Numerical Study Of Scale Effects On The
Delamination Of Laminates Under Low-
Velocity Impact Yajun Chen, Zhefeng YU, Hai
Wang (Shanghai Jiaotong U., China)
Optimization Of Drilling Conditions Of Glass
Fibre Reinforced Plastic Composite Material
Using Genetic Algorithm N.S. MOHAN,
Jagannath K, S.S. Sharma, Chandrashekar Bhat
(Manipal Inst.Tech.)
Performance of Thin Walled Composite
Beams with Stochastic Properties under
Matrix Cracking Damage Babruvahan P.
RONGE, Prashant M. Pawar (Pandharpur)
Session 9b MAGNETIC 5
Wednesday 11:00AM-1:30PM Ballroom 2
Chairs: W.Q. Huang, H.X. Zhang, K.R. Shin,
K.M. Lee, Nitrogen or Oxygen Bonds Passivating on Surface of
Si Quantum Dots Formed by Nanosecond Pulse
Laser Wei-Qi HUANG (Guizhou U., Guiyang,
China),Shi-Rong Liu (CAS, Guiyang, China), Quan Lü (Guizhou U.), Chao-Jian Qin (CAS, Guiyang)
Extrinsic-To-Intrinsic Transition And Sign Changes
of Seebeck Coefficients for PbTe Nanocrystals
Wenwen ZHOU, Wenjing Zhang, Jan Ma, Qingyu Yan
(Nanyang U., Singapore)
Electrical Properties Of Few-Layer Boron Nitride
Hongxin ZHANG, Peter X. Feng (U. Puerto Rico)
Ultrasonic Characterization for Electronic
Package’s Micro-structure Chunguang XU, Zhongzhu Liu, Xinyu Zhao, Bolong Men (Beijing I.T.,
China)
Simulated Body Fluid Evaluation Of Titanium
Oxide Layers Exhibiting Different Morphologies
Formed By Electrochemical Plasmacoating Process
Ki Ryong SHIN, Kang Min Lee, You Chan Jung
(Hanyang U., Ansan, S. Korea),Young Gun Ko
(Yeungnam U.), Dong Hyuk Shin (Hanyang U.)
Synthesis Of Cobalt/Gold Bimetallic Hollow
Microspheres And Its Optical Properties
Cheng-Seong KHE, Azizan Aziz, Zainovia Lockman
(U. Sains Malaysia, Penang)
Combination of Micro-Fluidics and Sol-Gel
Templating for Nanostructuring of Titania Thin Films for Photovoltaic Application Monika RAWOLLE, Matthias A. Ruderer, Stefan M. Prams, Qi
Zhong, David Magerl (TU Muenchen, Germany), Jan
Perlich,Stephan V. Roth (HASYLAB at DESY, Hamburg), Philipp Lellig (MPI-P, Mainz), Jochen S.
Gutmann (U. Duisburg-Essen), Peter Müller-Buschbaum (TU Muenchen)
Electrochemical Response Of ZrO2-Mgo Layer On
Mg Alloy Via Plasma Electrolytic Oxidation
Followed By Annealing Treatment KangMin LEE,
Byung Uk Lee, InJun Hwang (Hanyang U., Seoul, S.
Korea), Young Gun Ko (Yeungnam U., S. Korea),
Dong Hyuk Shin (Hanyang U.)
Session 9c INFRA 5
Wednesday 11:00AM-1:30PM Ballroom 3
Chairs: M. Fan, H.B. Shim, T.J Cho, K.B. Kim
High Strength Natural Fibre Composites for
Construction Mizi FAN (Brunel U., UK)
Induced Size Effects Of Gd3+ Ions Doped
NiZn Ferrite Nanoparticles
Balwinder KAUR (Jammu, India), Manju Arora,
A.K. Srivastava, R.P. Pant (New Delhi, India)
Experimental Study for Performance
Evaluation of Large Double Head Studs in
High Strength Concrete HakBo SHIM, Sung
Hun Jang, JooHo Lee, HyoSeon Park (Lotte
Res.Dev. Inst., S. Korea)
Air Permeability Test Of Concrete Tube
Structures With Joints
Joonam PARK, Lee-Hyeon Kim, Seong-Won
Nam (Korea Railroad Res.Inst., Kyunggi)
Fire Resistance Properties of Hybrid
Fibers Reinforced High Strength
Concrete
JeongSup KIM, CheolHee Cho,
MyungHwan Yoo, JaeHwan Kim,
ChangGeun Cho,YoungSuk Shin (Chosun
U., Gwangju, S. Korea)
Bayesian Belief Network Model for the
Deterioration of a Suspension Bridge
Taejun CHO (Daejin U., Pocheon, S. Korea)
A Study For The Changes Of The Micro
Structure By Deterioration Factors For
NPP
Concrete Structures KiBeom KIM, Do
Gyeum Kim, Ho Jae Lee, Jang Hwa Lee,
(Korea Inst Construct. Tech., Gyeonggi)
Session 9d BIO 3
Wednesday 11:00AM-1:30PM Dalian Room
Chairs: C. Gadau, R.E. Mackay, T.N. Lien Truong, L.H. Tong
Schizophyllum commune As Nano-Factory For Biosynthesis Of Silver
Nanoparticles Mat Don MASHITAH, Yen San, Chan (U. Sains Malaysia)
Silver Nanoparticles Based Materials For Antimicrobial Treatment Of
Medical Leathers And Sheepskins Carmen GAIDAU (Leather &
Footwear R.I., Bucharest, Romania), Aurora Petica (INCDIE, Bucharest,
Romania), Wuyong Chen (Sichuan U., Chengdu, China, Lucretia Miu
(Bucharest, Romania)
Fabrication And Micromechanical Testing Of Polymer Micro-Grippers
With Compliant Force Sensing Ruth E. MACKAY (U. Dundee, UK),
H.R. Le (U. Plymouth,UK), L. Zhang (U. Dundee)
Promising Materials Made Of Bio-Hybrid Polyurethane
Ernie Suzana ALI (U. Sains Islam Malaysia), Sahrim Hj Ahmad, Syazana
Ahmad Zubir (Int. U. Malaysia, Selangor)
Sensitive Label-Free Impedimetric Immunosensor Based On
Polypyrrole For Human Chorionic Gonadotropin Hormone Detection
T.N. Lien TRUONG (Hanoi U.T., Vietnam), Miyuki Chikae, Yoshiaki
Ukita, Yuzuru Takamura (JAIST, Ishikawa, Japan) chair Liposome As A Drug Carrier System For Different Active Substances
Mont Kumpugdee-VOLLRATH, Hilal Bilek (U. App. Sci, Berlin, Germany)
Engineering Of Concentrated Emulsions As A Drug Carrier System For
Pharmaceutical Application Lihong TONG, Mont Kumpugdee-Vollrath, Jens-
Peter Krause (U. Applied Sciences, Berlin, Germany), Pornsak Sriamornsak (Silpakorn U., Nakhon Pathon, Thailand)
Surface Roughness Evaluation Of Experimental Dental Nanocomposite After
Bleaching Dasmawati MOHAMAD, Zuryati Ab Ghani, Ooi Qian Qian, Zaid Hameed, Mohammed Ali (U. Sains Malaysia, Kelantan)
Beta Casein Nanovehicles For Targeted Oral Drug Delivery – Towards
Treatment Of Gastric Cancer Alina SHAPIRA, Irit Davidson, Noa Oron, Yehuda Assaraf, Yoav D. Livney (Technion, Israel I.T.) Tues-Wed
Session 9e GENERAL 9
Wednesday 11:00AM-1:30PM Hangzhou Room
Chairs: G.VanAssche, C.M. Gomez, S.F. Leung, H. Zimmermann
Studies On Polymer-ZnO Nanowires Composites For Gas Sensing
Application Shiv Kumar GUPTA, Niranjan Ramgir, Manmeet Kaur,
Niyanta Datta, Vibha Saxena, Aditee Joshi, Ajay Singh, Dinesh Kumar
Aswal (Mumbai, India)
Relations Between Phase Diagram, Kinetics Of Thermal Annealing
Process, And Morphological Stability In Polymer:Fullerene Blends For
Bulk Heterojunction Solar Cells Guy VanASSCHE, F. Demir, B. Van
Mele (Vrije U. Brussel, Belgium), J. Manca, D. Vanderzande (Hasselt U.,
Diepenbeek, Belgium)
Optimization Of Cellulose Fiber Isolation From Rice Straw And Its
Application For Thermoplastic Composite Formation Siritorn
NARKCHAMNAN, Chularat Krongtaew (Mahidol U., Thailand)
Rheological Behavior Of Epoxy-Amine Systems Modified By Sepiolite
Clara M. GOMEZ (U. Valencia, Spain), Andres Nohales (Castellon, Spain),
Paula Felix (U. Valencia)
Design & Development Of ‘Programmable Transceiver Controller (A
Nanotechnology Device)’ For Wimax/Wifi Wireless Communication.
S. Devendra K. VERMA, P. K. Barhai (Birla I.T., India)
Optical Absorption Of Three-Dimensional Nanoporous Structures
SiuFung LEUNG, Qingfeng Lin, Miao Yu (Hong Kong U.S.T.,China),
Kyungmok Kwon (KAIST, S. Korea), Yunze Long (HKUST), Kyoungsik
Yu (KAIST), Zhiyong Fan (HKUST)
Advanced Dispersion Strategies And Property Design For CNT/Rubber
Nanocomposites Heike ZIMMERMANN, Robert H. Schuster (Hannover,
Germany)
Polymer Matrix Composites Exhibiting Ultra-High Thermal
Conductivity Greater Than 500 W/M-K Jyh-Ming TING (Nat. Cheng
Kung U., Tainan) INVITED 25 min
1:30PM-2:30PM LUNCH
Session 10a MATH 10
Wednesday 2:30PM-5:30PM Ballroom 1
Chairs: L.P. Ding, Z.Q. Huang, J. L. Urrutia,
L.L. Peng
Fuzzy Logic based Matrix Crack Detection in
Thin-walled Composite Beam under Material
and Fabrication Uncertainties Prashant M.
PAWAR, Babruvahan P. Ronge
The Study On A Numerical Controlled Multi-
PinsInserting System For Z-Pinned Composite
Laminates Preparation Liping.DING,
Junwei.Qi, Biao.Yan, Jun.Xiao, Liwei.Wen
(NUAA, Nanjing, China)
Mathematical Modeling For Single-Walled
Carbon Nanotubes (SWCNTs) Based On
Magneto-Electro-Elastic Beam Model Mei-
Feng LIU, Tai-Ping Chang(I-Shou U.,
Kaohsiung)
Evaluation Of Stress Field For An Elliptical
Inhomogeneity With Imperfect Interface In
Anisotropic Media C.K. Chan (Hong Kong
Poly U., China), Z.Q. HUANG, G.H. Nie (Tongji
U., Shanghai, China)
A Semidefinite Harmonic Oscillator For
Seismic Analysis Of Structures In A Complex
Space. A Physical And Mathematical Shake
Table J. L. URRUTIA-Galicia (UNAM,
Mexico D.F.)
Multi-Sphere Models Of Particles In Discrete
Element Simulations
Rimantas KACIANAUSKAS, Darius
Markauskas (Vilnius Gediminas T.U., Lithuania)
Traction-Separation Laws On The Application
Of Cohesive-Zone Models To Delmination
Behaviour Of Composite Material L.L.
PENG, X.J. Gong, K.J. Wong(U. Bourgogne,
Nevers, France), 1,L. Guillaumat (Arts et Metiers
Paris Tech, France)
Session 10b MAGNETIC 6
Wednesday 2:30PM-5:30PM Ballroom 2
Chairs: Y.Z. Sun, J.J. Hou, P.K. Barhai,
K. Habib
Research on the Characteristics of Dielectric
Barrier Discharge and Dielectric Barrier
Corona Discharge Yanzhou SUN, Mi Zeng
(Henan Poly U., Jiaozuo, China),Yan Lu (Henan
Coal and Chem. Group, Jiaozuo, China)
Synthesis And Characterization of GaAs
Nanowires On Amorphous Substrates
Jared J. HOU 1, Ning Han, Fengyun Wang, Alvin
T. Hui, Guangcun Shan, Fei Xiu, Tak F. Hung,
Johnny C. Ho (City U., Hong Kong, SAR,
China)
Synthesis And Electron Field Emission Studies
Of Nanocrystalline Diamond Films
P.K. BARHAI, Rishi Sharma, Vijay Chatterjee
(Birla I.T., Ranchi, India), N. Woehrl, Volker
Buck (U. Duisburg-Essen, Germany)
Well-Alingned And Conductive Carbon
Nanotube/TiO2 Film For Flexible
Photoelectrode Jiangtao DI, Qingwen Li
(Suzhou Inst. Nano-tech & Bio-tech., China)
Fabrication And Characterization Of Pure
Single Walled Carbon Nanotubes
Microelectrode For Electrochemical
Measurement XuanViet NGUYEN, Yoshiaki
Ukita, Yuzuru Takamura (JAIST, Ishikawa,
Japan)
Current Properties Depending on
Temperature of Hydrogenated Silicon
Oxycarbide
Teresa OH (Cheongju U., S. Korea)
Highly Aligned Carbon Nanotube/Polymer
Composites With Much Improved Electrical
Conductivities Xuemei SUN, Huisheng Peng
(Fudan U., Shanghai, China)
Resistivity/Conductivity of Inorganic Oxides
by Optical Interferometry Techniques
Khaled HABIB, Amer Al-Arbeed (KSIR, Safat,
Kuwait)
Session 10c INFRA 6
Wednesday 2:30PM-5:30PM Ballroom 3
Chairs: Po-Yu Ko, Kihak Lee, E.S. Choi, T. Yu
Analytical Evaluation For Shear Strength Of
Beam-Column Connections Strengthened
With CFRP Composites Kien Le-Trung,
Kihak LEE (Sejong U., Seoul, S. Korea),Do
Hyung Lee (Paichai U., Daejeon, S. Korea),
Luciano Feo (U. Salerno, Italy), David Hui (U.
New Orleans)
Reinforcement of Plain Concrete Piers of
Railroad Bridges using Composite of FRP-
Steel Plates Eunsoo CHOI, Young-Soo Chung,
Joonam Park, Baik-Soon Cho (Hongik U.,Seoul,
S. Korea)
Behaviour Of FRP-Confined Concrete-Filled
Steel Tubular Columns Subjected To
Combined Axial And Cyclic Lateral Loads
Tao YU, Y.M. Hu, J.G. Teng(Hong Kong Poly
U., SAR, China)
Experimental Observation Of Rc Columns
Strengthened With Stainless Steel Wire
Do Hyung LEE (PaiChai U., Daejeon, S. Korea),
Byeong Hwa Kim (Kyungnam U., Kyungnam, S.
Korea), Sung Hoon Kim (Seoul N.U., S. Korea),
Jun-Hyeok Choi (Seoul, S. Korea)
An Experimental Study For Carbonation
Effect On The Concrete Using MIP and SEM
Ho Jae LEE, Do Gyeum Kim, Ki Beom Kim
(Korea Inst Const.Tech., Gyeonggi), Hyung Ju
Kim (Seoul, Korea)
A Study On Microstructure Change By
Carbonation In NPP Concrete
Do Gyeum KIM, Ho Jae Lee (Korea Inst
Const.Tech., Gyeonggi), Hyung Ju Kim(Seoul)
Lateral And Restrained Distortional Buckling
Of Doubly-Symmetric Steel I-Beams
Alper Buyükkaragoz, Ilker KALKAN (Kirikkale
U., Turkey)
Use of Waste polyethylene as a Concrete
Additive: Surface Modification of PE by
Grafting PAM Po-Yu Ko (Nat. Chiayi U.,
Chiayi), Chun-Ku Lu (Nat. Cheng Kung U.,
Tainan),Maw-Tien LEE (Nat. Chiayi U.)
Session 10d NANO 4
Wednesday 2:30PM-5:30PM Dalian Room
Chairs: C.L. Yeh, S. Murai, J. Chen, H. Chougule
Enhancement Of Optical Birefringence In Anisotropic Nanocomposites
Mediated By Localized Surface Plasmon Resonance Shunsuke
MURAI, Takuya Tsujiguchi, Koji Fujita, Katsuhisa Tanaka (Kyoto U.,
Japan)
Self-Organized Nanoporous Structure With Long Range Perfect
Ordering Qingfeng LIN, SiuFung Leung , Yunze Long, Zhiyong Fan
(Hong Kong U.S.T., SAR, China)
Multifunctional and Specific Interactions of MWCNT And Polymer As
Decisive Parameters For High Performance Of Nanocomposites
Harishkumar CHOUGULE, Ulrich Giese, Robert H. Schuster (Hannover)
Fabrication of 2D Silicon Nano-Mold Based On Sidewall Pattern
Technique
E. CHENG, Helin Zou, Chong Liu (Dalian U.T., China)
Rheological Characterization Of Chitosan/Nanowhiskers Composites
Hugo Lisboa, Joao P. Borges, Goncalo Pereira, Ana M. Ramos, Maria T.
CIDADE (U. Nova Lisboa, Portugal)
Nanostructured Dlc Coatings For Self-Assembly Applications
Enric BERTRAN, V.M. Freire, E.J. Cabrera, C. Corbella, S. Portal, E.
Pascual,J.L. Andújar (U. Barcelona, Spain)
Combustion Synthesis Of (Α+Β)-Sialon Composites
Chun-Liang YEH (Feng Chia U., Taichung) Tues-Thurs evening
Session 10e GENERAL 10
Wednesday 2:30PM-5:30PM Hangzhou Room
Chairs: M. Zemko, L.M. Deng, Jarlen Don, G. Chen
Mechanical Properties Study of Advanced Pultrusion Epoxy
Composites
Leiming DENG, Junwei Qi, Jun Xiao, Chong Dou (NUAA, Nanjing,
China)
Polyethylene: The Next Frontier For Self Reinforced Polymer
Composites Lucas MORGAN, B. Weager (NetComposites, Chesterfield,
UK), J. Clarke, N. Thomas (Loughborough U., UK)
Applications Of Nanotechnology In High Voltage Power Equipment –
Nanodielectrics George CHEN (U. Southampton, UK) INVITED 25 min
Processing Of Carbon-Carbon Composites For Aircraft Brake
Applications
Jarlen DON, Tsuchin Philip Chu (Southern Illinois U., Carbondale)
Preparation and Characterization of Pb-free (Na, K)NbO3-Based
Ceramics For Eco-Friendly Piezoelectric Device Jeong Seon HAN,
Hee Chul Lee (Korea Polytech U., Kyunggi)
Enhancement Of Wear And Impact Property Of Poly(Butylene
Terephthalate) By E-Beam Process
Joon-Pyo JEUN, Keum-Jin Ko, Bum-Sik Shin, Hyun-Bin Kim, Young-
Chang Nho, Phil-Hyun Kang (KAERI, S. Korea)
Optimization Of Train Seat Frame Made Of Steel-Polyurethane Foam
Composite Michal ZEMKO, Miroslav Urbanek, Martina Donatova, Jan
Dzugan, Libor Kraus (COMTES, Dobrany, Czech Rep.)
5:30PM-6:00PM Break
Session 11a MATH 11
Wednesday 6:00PM-9:00PM Ballroom 1
Chairs: R.M. Felfel, V.V. Lepov, Y.S. Su,
S. Naya
Multiscale Modeling Of Deformation
Processes In Situ
Valeriy V. LEPOV (Yakutsk, Russia), Boris A.
Loginov (Moscow Inst Electronics, Russia)
Study Of Dynamic Drop Impact Response Of
Open-Cell Metal Foam
Yishi SU, Xiaolu Gong (U.T. Troyes, France)
Creep-Buckling Failure Of Open-Cell Foams
Under Uniaxial Compression
Ting-Jung Chen, Jong-Shin HUANG (Nat.
Cheng Kung U., Tainan)
New Statistical Functional Nonparametric
Methods For Study Of Nanomaterials
Salvador NAYA, Ramon Artiaga, Mario
Francisco-Fernandez, Javier Tarrío-Saavedra,
Jorge López-Beceiro (U. Coruna, Ferrol, Spain)
Flexural, Shear And Compressive Properties
Of Bioresorbable PLA-PBG Fibre Reinforced
Composite Intramedullary Rods R.M. Felfel
(Mansoura U., Egypt), I. Ahmed, A.J. Parsons,
G.S. Walker, C.D. RUDD (U. Nottingham, UK)
Research Of Nanostructural Tool Materials
Servosurfaces
A.S. SYROMYATNIKOVA, M.N. Safonova,
A.A. Fedotov A.A (Yakutsk, Russia)
Development Of Methods Of Severe Plastic
Deformation And Research Methods Of
Ultrafine Steels N.D. PETROVA, A.M.
Ivanov, Eu S. Lukin (Yakutsk, Russia)
Use Of Ultradisperse Modifiers For
Production Of Wear Resistant Powder
Coatings And Materials
M.Z. BORISOVA, G.G. Vinokurov, N.F.
Struchkov, M.I. Vasileva (Yakutsk, Russia)
Session 11b METAL 4
Wednesday 6:00PM-9:00PM Ballroom 2
Chairs: P. Fajfar, S.J. Huang, Y.T. Liu, B. Zhao
Mechanical Suppression Of Tunneling
Between Metallic Beads Aymen TEKAYA, R.
Bouzerar (U. Picardie Amiens, France), V.
Bourny (U. Picardie)
Thermal Fatigue Behavior And Cracking
Characteristics Of Indefinite Chill Iron Rolls
Peter FAJFAR, Milan Tercelj, Matevz Fazarinc
(U. Ljubljana, Slovenia), Borut Zuzek
(Inst.Metals Tech., Ljubljana)
Mechanical Properties Of Particle Reinforced
Magnesium Composites SiCp/AZ80 Song-Jeng HUANG, Chi-Rung Li, Kai-Lun Yan
(Nat. Chung Cheng U., Chia-Yi)
The Improvement of Oxidation Behavior of
Powder Metallurgy Made Fe-Cr Alloys
Yen-Ting LIU, Shuang-Shii Lian (Nat. Taiwan
U., Taipei), Wei-Ja Shong, R.Y. Lee (Inst.
Nuclear Energ Res.) A Comparative Study Of Corrosion Resistance On
Metal Joint By Using Different Types Of Cooling
Method W.B. Wan NIK (U. Malaysia Terengganu),
R. Rosliza (TATI U. Coll., Kemaman) , O. Sulaiman
(U. Malaysia Terengganu), Y. Prawoto (U.Teknologi Malaysia), M.F.R. Zulkifli (U. Malaysia Terengganu),
David Hui (U. New Orleans)
Structure Of Al87Ni8Dy5 In Amorphous And
Nanocrystalline State
S.I, Mudry, Yu.O. Kulyk (Nat. U. Lviv, Ukraine)
Study Of Cooling Rate Effect On Back-Diffusion
During Solidification Of Continuously Cast Steel
Billet
Jana DOBROVSKA (TU Ostrava, Czech Rep.),
Frantisek Kavicka (Brno U.T., Czech Rep.), Hana
Francova, Věra Dobrovska (TU Ostrava)
SO2-Gas Corrosion Of Cr2AlC Compounds
Sang-Hwan BAK, Min-Jung Kim, Sung-June
Bong, Seul-Ki Kim (Sungkyunkwan U., Suwon,
S. Korea)
Session 11c COMPOSITES 2
Wednesday 6:00PM-9:00PM Ballroom 3
Chairs: L. Feo
Fabrication Of A Microencapsulated n-
Octadecane Material For Thermal Energy
Storage D.Z. Chen(Shenzhen
U.,Guangdong,China), C.P. TSUI, C.Y.Tang
(Hong Kong Poly U.), H. Zhu, Y.Z. Chen, G.C.
Yang, Y. Chen (Shenzhen U.), L. Chen (Hong
Kong Poly U.)
III-V Compound Semiconductor Transistors
Heterogeneously Integrated On Si Substrates
Hyunhyub KO (Ulsan Nat. I. Sci.Tech., S.
Korea)
Applications of Microbubble in Aquaculture
Gilbert Y.S. CHAN (Hong Kong Poly U.),
Jack Xiao (Ozner Group, Shanghai, China),
Li Wei, S W Kwok (Hong Kong Poly U.)
Oxidation Of Nitride Layers Formed On Ti-
6al-4v Alloys By Gas Nitriding Min-Jung KIM,
Sang-Hwan Bak, Zhao Chenguang
(Sungkyunkwan U., Suwon, S. Korea)
Construction of Surface Piezoelectricity Using
State-Space Formalism Weiqiu CHEN
(Zhejiang U., Hangzhou, China)
A Study Of Early Strength Improvement Of
Cement Mortar Mixed With Blast-Furnace
Slag Powder Jinhyoung KIM, Hanseung Lee
(Hanyang U., Ansan, S. Korea)
A Study on the Fixed Amount of CO2 and the
Estimation Of Production of CaCO3 on Waste
Concrete Powder by Wet Carbonation Heesung AHN, Hanseung Lee (Hanyang U.,
Ansan, S. Korea) Manufacturing Biocomposite Parts Using LRTM
Jayaraman RAGHAVAN, B. O’Connor (U. Manitoba, Canada), G. Kime (Delaware, Canada), B.
Klimack, J.A. Milne (Carlson, Canada), P. Zanetel
(New Flyer Ind., Winnipeg, Canada) Mon-Tues Highly Efficient Ultraviolet Light Emission From
Silicon Nanocrystals Naoto SHIRAHATA (NIMS,
Tsukuba, Japan) Mon-Wed
Session 11d NANO 5
Wednesday 6:00PM-9:00PM Dalian Room
Chairs: A. Cornet, A.J. Nathanael, W.C. Xiao, K. Yusoh
Possible Electronic Device Applications of Graphene Nanoribbons
Gengchiau LIANG (Nat. U. Singapore) INVITED 25 min
ZrN/Hydroxyapatite Nanocomposite Coatings By Co-Sputtering
Method A. Joseph NATHANAEL, Jun Hee Lee, Sun Ig Hong
Chungnam N.U., S. Korea)
The Influence Of Nano-Fillers On The Insulation Properties Of Epoxy
Resin Qi WANG, George Chen (U. Southampton, UK)
A Novel Nano-diamond Patterning Technique using Selective
Nucleation and Growth Weican XIAO, Xi Zhou, Sean Yost, Ramjee
Balasubramanian, Sacharia Albin (Old Dominion U., Norfolk, VA)
Nanomechanical Properties Of Polyurethane Nanocomposites Studied
By Nanoindentation Kamal YUSOH (U. Malaysia Pahang, Kuantan), M.
Song (Loughborough U., UK)
Fabrication and Mechanical Properties of MWCNT Epoxy Composite
Chorng H. TWU (Tainan U.T., Tainan), Chen-Chi M. Ma, Sheng-Yen Wu,
Yuan-Li Huang, Hsi-Wen Tien, Shin-Yi Yang, Siu-Ming Yuen (Nat. Tsing
Hua U., Hsinchu)
Horizontal Suspension of Carbon Nanotubes
Jianmin MIAO, Jingyu Lu (Nanyang T.U., Singapore)
Nanowires: Your Laboratory And Theoretical Book To Understand
Surface Phenomena
Albert CORNET, J. Daniel Prades, Albert Cirera (U. Barcelona, Spain)
Session 11e GENERAL 11
Wednesday 6:00PM-9:00PM Hangzhou Room
Chairs: M. Watanabe, W. Shang, X. Meng, X.R. Zeng
Hot-Press Fast-Bonded Technology For Prepreg Wiinding
Biao YAN, Jun Xiao, Liwei Wen (NUAA, Nanjing, China)
Understandings of Solid Particle Bonding Behaviors in Warm Spray
Deposition Makoto WATANABE, KeeHyun Kim, Seiji Kuroda (NIMS,
Tsukuba, Japan)
SEM Visualization Of CNTS In CNT/Epoxy Composites At Low
Accelerating Voltage
Wenjing LI, Wolfgang Bauhofer (Hamburg U.T., Germany)
Influence Of Z-Pin’s Curing Degree On Properties Of Laminates And
Its Mechanism Wei SHANG, J. Xiao , P.Z. Cheng, L.M. Deng. Q.Y. Chu
(NUAA, Nanjing, China)
Fiber-Metal Hybrid Laminates As Structural Material In Towers For
Offshore Wind Energy Converters J.C. Suarez (U. Poli Madrid, Spain),
X. MENG (Ocean U. of China, Qingdao), S. Guzman, M.A. Herreros, I.
Diez (U. Poli Madrid)
Synergistic Effect Of Phosphorus-Containing Nanosponge On The
Intumescent Flame Retardant Polypropylene Xuejun Lai, Xingrong
ZENG, Hongqiang Li, Changyu Yin, Haili Zhang, Kecheng Gong (South
China U.T., Guangzhou)
Nanodiamonds From Pulsed Plasma Generated In Water
Imil A. AKKOZIEV, S.K. Sulaymankulova, A.S. Mametova, J.K.
Zhasnakunov (KRSU, Kyrgyzstan)
Self-Organization Of Nanoparticles Of Copper, Silver And Gold In
Pulsed Plasma In Liquid S.K. Sulaimankulova, Imil A. Akkoziev, A.S.
Mametova, Bektur K. AKKAZIEV (KRSU, Kyrgyzstan)
Session 12a MATH 12
Thursday 8:00AM-10:30AM Ballroom 1
Chairs: A. AlShehri, H.P. Song, G.M. Luo,
R. Mix
Preparation And Microstructural
Characterization Of Carbon /Carbon
Composite Ramani VENUGOPALAN, D.
Sathiyamoorthy, A.K. Tyagi (Mumbai, India)
The Interaction Between A Screw Dislocation
And A Semi-Infinite Wedge Crack With A
Nano Circular Inclusion At Tip
Hao-Peng SONG. Cun-Fa Gao (NUAA, Nanjing,
China)
A Study on Improvement of Laminate
Structures Subjected to Low-Velocity Impact
Guang-Min LUO (Nat. Kaohsiung Marine U.,
Kaohsiung)
Special Interface Design For Adhesion
Improvement Renate MIX, Huajie Yin, Joerg
Friedrich (BAM, Berlin, Germany)
A Cellular Automata Simulation For The
Tension Behavior Of Carbon Nanotubes
X.H. Huang, X.Q. HE (City U., Hong Kong,
China)
Thermal Radiation Characteristics Of Silicon
Inverse Opal In Mid Infrared Range
Jing XU, Yujie Li, Rongsheng Liu, Kai Xie (Nat.
U. Def.Tech., Changsha, China)
Dynamic Response Analysis of Shear
Deformable Laminated Beam with the
Method of Reverberation Ray Matrix
F.X. Miao (Ningbo U., China), Guojun SUN
(Shanghai Jiaotong U., China)
Tensile And Fracture Behaviour Of Die-
Drawn Polypropylene-Clay Nanocomposites
Abdullhadi ALSHEHRI (SABIC, Riyadh, S.
Arabia), J. Sweeney, P. Caton-Rose, P.D. Coates
(Bradford U.,UK)
Session 12b TEXTILE 3
Thursday 8:00AM-10:30AM Ballroom 2
Chairs: Jing Zhou, J. Militky, P. Dolez,
C. Ha-Minh
Nanophase Treatment Of Natural Fiber For
Fiber Reinforced Polymer Composites
Sheldon Q. Shi, Jinshu Shi, Kaiwen Liang, Jinwu
WANG (Mississippi St.U., Starkville)
Prediction Of Glass Leno Fabrics Porosity
And Strength
Jirí MILITKY (TU Liberec, Czech Rep.),
Jaroslav Dvorak (Res Inst.Textile
Machinery,Liberec, Czech Rep.), Dana
Kremenakova, Brigita Kolcavova-Sirkova (TU
Liberec)
Electromagnetic Shielding Of Hybrid Weaves
Veronika SAFAROVA, Jiri. Militky (TU Liberec,
Czech Rep.)
Preparation Of Nanocellulosic Powder From
Jute Fibres By Ball Milling Process
Vijay BAHETI, Miroslava Marsalkova, Jiri
Militky (T.U. Liberec, Czech Rep.)
Factors Affecting the Tearing Resistance of
Textile Structures
Patricia DOLEZ, Ennouri Triki and Toan Vu-
Khanh (Ecole Tech Sup, Montreal, Canada)
Experimental Investigations Of The Impact
Behavior Of A Warp Interlock Fabric
Cuong HA-MINH, François Boussu, Jan Van
Roey, Toufik Kanit, David Crépin, Abdellatif
Imad (U. Lille Nord de France)
Generalized Geometric Model Of 3D Woven
Preforms From Spun Yarns
Abdel-Fattah M. SEYAM, Mehmet E. Ince (N.
Carolina St. U., Raleigh)
Compatibilizing Effect Of Epoxy On The
Structure And Properties of PET/PA6 Blend
Fibers Jing ZHOU, ByungGil Min, JuYeon
Kim (Kumoh Nat. I.T., Gumi, S. Korea)
Session 12c CHEM 4
Thursday 8:00AM-10:30AM Ballroom 3
Chairs: S. Al-Malaika, S. Zalis, L. Lapcik,
M. Ahmad
Quantum Chemical Modeling Of Spectral
Properties And Electron Transfer In Extended
Systems Stanislav ZALIS, Hana Kvapilova
(ASCR, Prague, Czech Rep.), Irena
Kratochvílova, Jakub Sebera (ASCR), Antonín
Vlcek, Jr. (U. London, UK), Rainer F. Winter (U.
Regensburg, Germany)
Kinetics And Thermodynamics Of Model
Colloidal Particle Deposition On Synthetic
Polymer Surfaces Lubomir LAPCIK, Jr., M.
Frastík, P. Smolka, B. Lapcikova(Tomas Bata U.,
Zlin, Czech Rep.)
Defect Induced Hardening And Toughening in
Mn3CuxGe 1-xN Metallic Perovskite
Yoshinobu NAKAMURA (U. Tokyo, Japan),
Koshi Takenaka (Nagoya U., Japan), Akira
Kishimoto (Okayama U., Japan), Hidenori
Takagi (U. Tokyo, Japan)
High Molecular Weight Soft Segment based
Polyethylene Shape Memory Polymers
M. AHMAD (U. Bolton, UK), B. Xu (Heriot-
Watt U., Edinburgh, UK), H. Purnawali
(Nanyang T.U., Singapore), P.J. King, P. Chalker
(U. Liverpool, UK), Y.Q. Fu (Heriot-Watt U.),
W.M. Huang (Nanyang T.U.), M. Miraftab, J.K.
LUO (U. Bolton, UK) chair
Oxidation Of MoSi2/SiOC/SiC Composite
Sung-June BONG, Min-Jung Kim, Sang-Hwan
Bak, Dong-Bok Lee(Sungkyunkwan U., Suwon)
Polymer-Containing Catalytic
Nanocomposites Esfir SULMAN, Valentina
Matveeva, Mikhail Sulman (Tver T.U., Russia)
PP-Clay Nanocomposites: Degradation and
Stabilisation S. Al-MALAIKA, H.H. Sheena
(Ashton U., Birmington, UK)
Session 12d OXIDE 3
Thursday 8:00AM-10:30AM Dalian Room
Chairs: K. Tanaka, T. Endo, T. Yamamoto, A.R. Zainun
Origin Of Ferromagnetism In Amorphous EuO-TiO2 Thin Films
Katsuhisa TANAKA, Koji Fujita, Yanhua Zong, Takahiro Kawamoto,
Hirofumi Akamatsu, Yoshiro Kususe, Shunsuke Murai (Kyoto U., Japan)
INVITED
In-plane Crystalline Orientations of LSMO/ZnO Double Layers
Tamio ENDO, Kenichi Uehara (Mie U., Japan), Miyoshi Yokura
(Kawamura Sangyo, Mie, Japan), Katsuhiko Inaba (Rigaku Corp, Tokyo),
Tomohiko Nakajima, Tetsuo Tsuchiya (NIAIST, Tsukuba, Japan), Hiroshi
Kezuka (Tokyo U.T.), Kazuhiro Endo (Kanazawa I.T., Japan) INVITED
Dominant Role Of Grain Boundary Scattering On Carrier Transport
Of Highly Transparent Conductive Ga-Doped ZnO Films
Tetsuya YAMAMOTO, Huaping Song, Hisao Makino and Naoki
Yamamoto (Koichi U.T., Japan) INVITED
Fabrication And Characterization Of Cu2O/TiO2 Composite Films For
Solar Cell Applications Ayib Rosdi ZAINUN (UiTM, UMP, Malaysia,
and Nagoya I.T., Japan), Tomoya Sakamoto (Nagoya I.T., Japan), Uzer
Mohd Noor, Mohamad Rusop (U.Tek MARA, UiTM, Malaysia), Masaya
Ichimura (Nagoya I.T.)
Fracture Strength Nanostructured Material Based On Dioxide
Zirconium Monocrystalline
Maxim PUGACHEV, Gennadi Moskvitin, Askold Melshanov
(Inst.Machines Sci, Moscow, Russia)
Oxidation Of Ni3Al-(Cr, Zr, Mo, B) Alloy Between 900 And 1100°C In
Air Seul-Ki KIM, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee
(Sungkyunkwan U., Suwon, S. Korea)
The Antibacterial Activities of Ag Doped T-ZnO
Xing DUAN, Xiaoling Xu, Zuowan Zhou (Southwest Jiaotong U.)
Session 12e GENERAL 12
Thursday 8:00AM-10:30AM Hangzhou Room
Chairs: Liwei Wen, J.S. Rhyee, G.a. Ibrahim, F. Elaldi
Quasi-One-Dimensional Transport And Thermoelectricity: Peierls
Distortion In Indium Selenides
Jong-Soo RHYEE (Kyung Hee U., S. Korea)
Explosive Welding Of Magnesium Alloy With Aluminum And Stainless
Steel P. MANIKANDAN, Joonoh Lee, Akihisa Mori, Kazuyuki
Hokamoto (Kumamoto U., Japan)
Application of Box-Behnken in Turning of Inconel 718 using PVD
Carbide Tools under Minimum Quantity Lubrication
Gusri Akhyar IBRAHIM, Che Hassan Che Haron, Jaharah Abdul Ghani,
Ahmad Yasir Moh. Said, Moh. Zaid, Abu Yazid (U. Kebangsaan Malaysia,
Kuala Lumpur)
A Study On Curing Processes And Environmental Effects For Rapid
Composite Repair Faruk ELALDI (U. Baskent, Turkey), Pelin Elaldi
(Bilkent U., Turkey)
Synthesis Of Superparamagnetic, Photocatalytic Nanocomposites For
Water Purification Darko MAKOVEC (Jozef Stefan Inst., Ljubljana,
Slovenia), Marjan Sajko (Maribor, Slovenia), Aljaz Selisnik (Celje,
Slovenia) c, Miha Drofenik (U. Maribor)
Research on Automatic Tape Laying of Elliptical Cylinder
Liwei Wen, Xianfeng Wang, Junwei Qi, Xiaoping Li, Yi Wang (NUAA,
Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China)
Resin Flowing Analysis In Sandwich Laminates Under VARTM
Process Cheng-Hsien CHUNG (United Ship Design Dev Cen, Taipei), Yu-
Ti Jhan , Ya-Jung Lee,Yu-Chieh Wang (Nat. Taiwan U., Taipei)
10:30AM-11:00AM Coffee Break
Session 13a MATH 13
Thursday 11:00AM-1:30PM Ballroom 1
Chairs: Lifang Guo, S.I. Ibekwe, R Noorani,
M. Todt
Functional Stability Of SMP Based Syntactic
Foam Samuel I. IBEKWE (Southern U. Baton
Rouge, LA), Tao Xu (Southern U. Nanjing,
China), Guoqiang Li (S.U. Baton Rouge, and
L.S.U.)
Design Of Experiments For Improving The
Tensile Strength Of Rapid Prototyping
Polymer Materials
James Clements, Rafiq NOORANI (Loyola
Marymount U., Los Angeles, Calif.)
Mechanical Behavior Of Carbon Nano-
Crystallites Forming Carbon Fibers
Melanie TODT, Franz G. Rammerstorfer
(Vienna U.T., Austria), Oskar Paris,Franz D.
Fischer (Leoben, Austria)
Interface Fracture Mechanics Of Nanoscale
Components On A Substrate
Hiroyuki HIRAKATA, Taku Nishihira, Akio
Yonezu, Kohji Minoshima (Osaka U., Japan)
Mechanical Behavior Of Metallic Nanowires
Containing Vacancy Cluster Defects Pei-
Hsing HUANG, Lay Gaik Teoh, Yu-Ren Wu,
Ming-Yue Huang, Hong-Yi Li (Nat. Pingtung U.
Sci Tech., Neipu)
Modeling Of Ecological Plastic Lubricant
Flow Martin VASINA (Tomas Bata U., Zlin,
Czech Rep.), Lumír Hruzík (TU Ostrava,Czech
Rep.)
Compression Fatigue After Impact Testing Of
Thermosetting Composites
Volker ALTSTAEDT, Manuel Kempf, Sebastian
Schwaegele (U. Bayreuth, Germany),Andreas
Ferencz (Henkel AG, Duesseldorf, Germany)
Session 13b MAGNETIC 7
Thursday 11:00AM-1:30PM Ballroom 2
Chairs: X. Landreau, Z. Bouchkour, Alessio Perrone, Yanbo LI Modulation of Metal-Insulator Transition
Temperature in W-doped VO2 Thin Films Toward
Mott Devices Hidefumi TAKAMI, Kenichi Kawatani, Teruo Kanki, Shigenori Ueda 1, Keisuke
Kobayashi1, Hidekazu Tanaka (Osaka U., Japan)
Deposition Of Nanometric SiOxHyCz Films At
Different Substrate Temperatures By
Atmospheric Pressure Microwave Plasma
Torch (Tia):First Steps Towards Self-
Assembled 3-Dimensional Nano-Sensors
Xavier LANDREAU, Briac Lanfant, Thérese
Merle, Guillaume Bouscarrat, Zakaria
Bouchkour, Christelle Dublanche-Tixier, Pascal
Tristant (U. Limoges, France) Influence Of The V/Iii Ratio On The Growth Of
Group Iii Nitride Quantum Dots Deposited On
Silicon Substrate By Plasma Enhanced Chemical
Vapor Deposition Zakaria BOUCHKOUR, Pascal
Tristant, Christelle Dublanche-Tixier, Cedric Jaoul, Xavier Landreau (U. Limoges, France), Elsa Thune,
René Guinebretiere (CEC, Limoges, France)
Ultraviolet Photodetectors Made By Bridging
Wide Bandgap Semiconductor Nanowires
Yanbo LI. Jean-Jacques Delaunay (U. Tokyo,
Japan) Grown Ambient Effect In Gan Crystalline Quality
On Si(111) By MOVPE Bablu K. GHOSH (U.
Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)
Effect Of Modified-Montmorillonite And Poss On
Electrical Properties Of Solid Polymer Elecrolytes
Keun-Byoung YOON (Kyungpook Nat U., Daegu, S. Korea), Dong-ho Lee (Dongyang Mirae U., Seoul, S.
Korea)
Time-Integrated And-Resolved Mass Spectrometric
Investigations During Laser Ablation Of Yttrium In
High Vacuum Alessio PERRONE, F. Gontad, A.
Lorusso (U. Salento,)
Nanostructured Mg Thin Films On Cu Substrates
For Photocathode Applications Carmen RISTOSCU,
Ion N. Mihailescu (Magurele, Ilfov)
Session 13c INFRA 7
Thursday 11:00AM-1:30PM Ballroom 3
Chairs: L. Feo, Q.f. Liu, B.H. Kim,
M.E. Abdullah
The Characteristics of the Cement Mortar
with Acetone-treated Rubber Crumbs
Chun-Ku Lu (Nat. Cheng Kung U., Tainan),
Liang-Hsing CHOU, Ying-Yu Shiu (Nat. Chia-yi
U., Minxiong)
Multi-Phase Modeling Of Ionic Transport In
Concrete When Subjected To An Externally
Applied Electric Field Qingfeng LIU, Long-
yuan Li, Jian Yang (U. Birmingham,UK)
Numerical Modeling Of Double Skin Profiled
Composite Shear Wall System Under In-Plane
Monotonic Loadings Shahryar RAFIEI,
Khandaker M.A. Hossain,Mohamed Lachemi,
Kamran Behdinan (Ryerson U., Toronto, Canada)
On The Shear Forces Distribution In
Double Lap Bolted FRP Joints:
Numerical And Experimental
Investigations Francesco Ascione,
Luciano FEO (U. Salerno, Italy)
Structural Health Monitoring Of Lattice
Girder Railway Bridges H.A.D.S.
Buddika, P.B. Ranjith DISSANAYAKE (U.
Peradeniya, Sri Lanka) chair
Session 13d BIO 4
Thursday 11:00AM-1:30PM Dalian Room
Chairs: Y.M.S. El-Shazly, S. Ghosh, P. Chow, Y.R. Wu
Intravenous Fat Nanoemulsion: a Novel Antidote for Local Anesthetic-
Induced Systemic Toxicity in Humans Guy Weinberg, Israel
RUBINSTEIN (U. Illinois-Chicago)
Kenaf Composition Boards With Termite Resistance
Poo CHOW (U. Illinois, Urbana), F.S. Nakayama, T.A. Coffelt, S.H.
Vinyard
Synthesis And Characterization Of Mesoporous CaO-B2O3-SIO2
Bioactive Glass Lay-Gaik TEOH, Yu-Ren Wu, Pei-Hsing Huang, Yi Lin
Huang (Nat. Pingtung U. Sci. Tech., Neipu)
Synthesis, Characterization And In Vitro Bioactivity Of Sol-Gel
Derived Mesoporous Bioactive Glass Yu-Ren WU, Lay Gaik Teoh, Pei-
Hsing Huang, Wei Haw Wu(Nat. Pingtung U. Sci. Tech., Neipu)
Applications of Cd-Te Quantum Dot Nanoparticles in Bio - Medical
Research Somesree GHOSHMitra, Nathaniel Mills (Texas Woman’s U.,
Denton, TX), Santaneel Ghosh, Jai N. Dahiya (Southeast Missouri St.U.,
Cape Girardeau). Tong Cai, J.A. Roberts (U. North Texas, Denton)
Improvement In Functional Properties Of Potato Starch/Nano-
Cellulose Fibre (NCF) Nanocomposite Films Niranjan R. Savadekar,
U.S. Annapure, S.T. MHASKE (Inst. Chem Tech., Mumbai, Mumbai,
India)
Mechanical Reliability of Bio-Composites from Bovine Teeth
Yehia M.S. El-SHAZLY (Alexandria U., Egypt), Mariana A. Moussa
Session 13e GENERAL 13
Thursday 11:00AM-1:30PM Hangzhou Room
Chairs: P.F. Wang, T. Chen, Huirong Le, S.S. Sharma
Research On The Deformation Of Prepreg Tape Influenced By The
Temperature
Xianfeng WANG, Liwei Wen, Junwei Qi, Xiaoping Li, Yi Wang (NUAA,
Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China)
Mechanical and Tribological Properties of Epoxy-CNT Nanocomposite
Coatings Huirong. LE (U. Plymouth, UK), A. Howson, M.
Ramanauskas (U. Dundee, UK) chair
Thermomechanical And Precipitation Hardening Of Stir-Cast Silica
Reinforced Aluminium Alloy Matrix Composites
S.S. SHARMA, K. Jagannath, N.S. Mohan, Chandrashekhar Bhat, P.R.
Prabhu, R.C. Chadaga (Manipal Inst. Tech., India)
Prediction of Sound Attenuation Characteristics of Muffler
Chandrashekhar BHAT, S.S. Sharma, K. Jagannath, N.S. Mohan (Manipal
Inst.Tech., India), S.G. Sathisha (QUEST, Bemgaluru, India) chair
Performance Comparison Of Carbide And HSS Drills In Drilling Of
GFRP Composite Materials- An Experimental Study Using Design Of Experiments B.R.N. MURTHY, Lewlyn L. R. Rodrigues, D. Anjaiah
Carbon Nanotube Fiber For Photovoltaic Application
Tao CHEN, Zhibin Yang, Huisheng Peng (Fudan U., Shanghai, China)
Improvements To The Design Of A Particle Beam Cluster Source For
Nanofabrication Stuart Thornton, Chris Binns, Shian GAO
Chalcogenide Microsphere Fabricated From Fibre Taper-Drawn Using
Resistive Heating Pengfei WANG, Gilberto Brambilla (U. Southampton,
UK), Yuliya Semenova,Qiang Wu, Gerald Farrell (Dublin
Inst.Tech.,Ireland)
1:30PM-2:30PM LUNCH
Session 14a MATH 14
Thursday 2:30PM-5:30PM Ballroom 1
Chairs: J.D. Yau, Sergey A. Kostyrko, S.H. Ni,
S.R. Kuo
Application Of Hilbert-Huang Transform To
The Signal Analysis Of Sonic Echo Testing
Sheng-Huoo NI, Li-Ting Hsu (Nat. Cheng-Kung
U., Tainan)
Effect Of Porosity On Impact Strength Of
Vitrified Bond Diamend Wheels
Yong-gai Hou, Fu-ren XIAO, Gui-ying Qiao
(Yanshan U., Qinhuangdao, China), Wen-jun Zou
(Henan U.T., Zhengshou, China), Bo Liao
(Yanshan U., China)
Applicability Of Gibbs Adsorption Equation
To Deformed Solid Surfaces Emmanuel M.
GUTMAN (Ben-Gurion U. Negev, Israel)
A Boundary Perturbation Analysis For A
Multilayer Film Coating Sergey A.
KOSTYRKO, M.A. Grekov (St. Petersburg State
U., Russia)
Exact Solution Of Edge-Bending Buckling Of
Rectangular Orthotropic Plates Shyh-Rong
KUO (Nat. Taiwan Ocean U., Keelung), J.D. Yau
(Tamkang U., Taipei)
Magneto-Elastic Response Of Rectangular
Orthotropic Plates Due To Multi-Lane Moving
Loads
Jong-Dar YAU (Tamkang U., Taipei)
BGA Impact Analysis: Numerical Study
Rasha M. Soliman, Medhat Awad El-Hadek,
Shaban Ibrahim ABDOU (Port-Said U.,Egypt)
On Different Projectile Nose Shapes in Soil
And Foam Penetration
Ce XU, Fenghui Wang, Shaoming Wang, Tiejun
Liu (Northwestern Polytech.U., Xi’an, China)
Session 14b MAGNETIC 8
Thursday 2:30PM-5:30PM Ballroom 2
Chairs: S.K. Bose, C.H. Wong, P.G. Li,
S.G. Yoon On The Suitability Of Some Cr-Based
Chalcogenides And Pnictides As Spintronic
Materials - Density Functional Results Yong LIU
(Yanshan U., Qinhuangdao, Hebei, China), Shyamal K.
Bose (Brock U., St. Catherines, Canada), J. Kudrnovsky (ASCR, Prague, Czech Rep.)
Magnetism of Quaternary Heusler Alloys:
(Cu,Ni)2MnSn as a Case Study
Shyamal K. BOSE (Brock U., St. Catharines, Ontario,
Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci,
Prague)
Molecular Dynamics Simulation For Ultrathin
Lubricant Nanofilms With Nonfunctional And
Functional End Groups B. Li, Chee How WONG (Nanyang T.U., Singapore),S.K. Yu, W. Hua, W.D.
Zhou (Data Storage Inst., Singapore)
Optoelectrical Properties of CdSe-Au Nanorod
Networks Peigang LI, Alexandros Lappas (IESL-
FORTH, Heraklion, Greece), Romain Lavieville, Yang
Zhang, Roman Krahne (Italian Inst.Tech., Genoa)
A Giant Dielectric Permittivity of BMNO-Bi
Composite Films Grown At Room Temperature By
Radio-Frequency Sputtering Hyun-June Jung, Hyun-Ah Song, Soon-Gil YOON (Chungnam Nat. U.,
Daejeon, S. Korea) INVITED 25
InGaN-Based MSM Photodetectors With
Transparent Ga-Doped ZnO Electrodes
P.C. CHANG (Kun Shan U., Yong-Kang, Tainan), A.N.
Tu (Nat. Cheng Kung U.,Tainan), K.H. Lee (Hsinchu) , C.L. Yu, S.J. Chang (Nat. Cheng Kung U.)
Growth and Micro Waves Characterizations of BST
and BST/BZN Hetero Structures Thin Films
Denis Remiens (U. Valenciennes, France), Lihui YANG
(Shanghai Inst. Ceramics, SICCAS, China), F. Ponchel, C. Soyer, J.F. Legier (U. Valenciennes), G. Wang, X.
Dong (SICCAS, China)
Preparation And Properties Of Magnetite–Carbon
Nanotube Reinforced Polypropylene-Natural
Rubber Blends Ing KONG, Robert Shanks (RMIT,
Melbourne, Australia), Sahrim Ahmad, Lih-Jiun Yu
(UKM, Selangor, Malaysia)
Session 14c INFRA 8
Thursday 2:30PM-5:30PM Ballroom 3
Chairs: S.H. AlSayed, F.M. Cheng, N.M. Nor,
C. Galan-Marin
Environmental Effects On Polymer Insulators
Ibrahim O. HABIBALLAH (King Fahd U. Pet.
Min, Dhahran, S. Arabia)
Numerical Study for CFRP Strengthening of
RC Columns for Blast Resistance
Saleh H. ALSAYED, Husain Abbas, Yousef Al-
Salloum (King Saud U., S. Arabia)
Application Of Ant Colony Algorithm In
Discrete Optimal Design Of Structural Truss
Yancang LI, Lina Zhao (Hebei U. Engineering,
Handan, China)
Research On Concrete Mixing Sequence At
The Time Of Feeding
Fangmeng CHENG, Yancang Li, Lei Wang
(Hebei U. Engineering, Handan, China)
Load Test on Reinforced Concrete Beams
Strengthened by Carbon Fibre Laminated
Plates—A Case Study
Humayun R. H. KABIR (Kuwait U., Safat)
Analysis Of Sandwiched Composite Long-
Span Foldable Beam
Norazman M. NOR, Agusril, Alias Yusof, Risby
Sohaimi, Ahmad M.A. Zaidi (UPNM, Nat Def.
U. Malaysia) Characterization Of Polymer Mortars Exposed To
Some Acid Solutions.
C. GALAN-MARIN; C. Rivera-Gomez (U. Sevilla,
Spain)
Bending Performances And Stiffness of FRP-steel-
Concrete Composite T-Beams With
Prefabricated BFRP Shell
Hong Zhu, Pu Zhang, Gang Wu, Zhishen
Wu(Southeast U., Nanjing, China)
Bending Performances And Stiffness Of Frp-Steel-
Concrete Composite T-Beams With Prefabricated
BFRP Shell Hong ZHU,
Pu Zhang, Gang Wu, Zhishen Wu (Southeast U.,
Nanjing, China)
Session 14d NANO 6
Thursday 2:30PM-5:30PM Dalian Room
Chairs: K. Talukdar, P.X. Feng, Jiqing He, Yu Teng
Carbon Nanotube / Poly(Vinyl Alcohol) Composites Formed By Spray
Winding Wei LIU, Yiping Qiu (Donghua U., Shanghai, China), Qingwen
LI (Suzhou Inst. Nano-Tech and Nano-Bionics, China)
A Prototype of Functional Nanowires-based 3D Biosensor Arrays
Peter X. FENG (U. Puerto Rico)
Effect Of Hot-Stretching Process On The Electrochemical Performance
Of Sn at CNFs Composite Anode Materials For Li-Ion Batteries
Xin LI, Yunhua Yu,Bingxue Liu,and Xiaoping Yang (Beijing U.
Chem.Tech., China)
Nano Fe3O4 Particles Addition Effects On YBa2Cu3O 7-δ
Superconducting Properties Wei KONG, Siti Nurdalila (Kuala Lumpur
Infrast. U.C., Malaysia), Ing Kong (RMIT,Melbourne, Australia), R. Abd-
Shukor (U. Kebangsaan)
Preparation Of Polylactide Grafted Nano-Hydroxyapatite Via ATRP
Jiqing HE, Zenghui Wang, Fujian Xu, Yuanchao Li, Qing Cai, Xiaoping
Yang(Beijing U. Chem.Tech., China)
Preparation Of Fe3O4/Cap Core-Shell Nanoparticles Exhibiting Good
Magnetism And Bio-application Yu TENG, Qing Cai, Zhou Fang, Keyu
Li, Xiaoping Yang(Beijing U. Chem.Tech., China)
Study Of The Sn/C Nanofibers With Different Sn Contents For Anode
Materials In Lithium-Ion Batteries Keyu LI, Yunhua Yu, Yu Teng, Xin
Li and Xiaoping Yang(Beijing U. Chem.Tech., China)
Compressive Behavior Of Filament Wound Carbon Fiber/Epoxy
Composite Tubes With Different Winding Angles Gang CHEN, Gang
Li, Jinming Zhu, Feng Wen, Yunhua Yu, Xiaolong Jia, Xiaoping Yang
(Beijing U. Chem.Tech., China)
Simulation Study Of A High Performance Metal-Oxide Carbon
Nanotube Field Effect Transistor Keka TALUKDAR, Apurba Krishna
Mitra (Durgapur, India)
Session 14e GENERAL 14
Thursday 2:30PM-5:30PM Hangzhou Room
Chairs: O. Soykasap, D. Rincon, C.R.C. Lima, I.R. Mustapa
High Thermal Conductivity Diamond Composites
F.M. SHAKHOV (Ioffe, St. Petersburg, Russia), A.M. Abyzov (St.
Petersburg Inst.Tech., Russia), S.V. Kidalov (Ioffe, St. Petersburg)
Testing Of 2m Offset Thin-Shell Reflector Demonstator
Omer SOYKASAP, Sukru Karakaya (Afyon Kocatepe U., Turkey)
Application Of The Scourer Or Luffacylindrica Under Natural, Rigid
And Flexible Resin To Obtain A Natural Composite Material Daniela
RINCON P, Carlos A. Guerrero F, Fabio E. Sierra, Eliana Guerrero-
Romero (U. Colombia)
Evaluation Of Thermal Sprayed Polymers For Tribological
Applications Carlos R. C. LIMA, Lucas P. Siqueira (UNIMEP, SP, Brazil),
Flávio Camargo (OGRAMAC, SP, Brazil)
Investigation Of Powder Metallurgy Application For Uncooled
Turbines Herny EMILIE (Toulouse, France), Xinhu Wu (U. Birmingham,
UK), Jean-Francois Rideau (Toulouse, France)
Hereditary Type Model For Mechanical Behavior Of Viscous Polymers
Sofia ALEXEEVA, Alexander Mosin (Moscow, Russia) chair
Improved Mechanical Properties Of Aluminium/Epoxy Composites
Through Silane Functionalization Of Aluminium Powder Jorge Ivan
CIFUENTES, Jason Marroquin (Kyung Hee U., Yongin, S. Korea)
Nanostructured Composites: Potential Materials For Organic Light
Emitting Diodes And Organic Solar Cells NGUYEN Nang Dinh, Dinh
Van Chau, Do Ngoc Chung, Nguyen Phuong Hoai Nam (Vietnam Nat. U.
Hanoi), Tran Quang Trung (Vietnam Nat. U., HCM city)
5:30PM-6:00PM Break
Session 15a MATH 15
Thursday 6:00PM-9:00PM Ballroom 1
Chairs: N. Allen Yu, C. Bal, A. Yasin, W.Z. Dai
The Frictional Effects In Harmonic Circuit
Carmen BAL, Carmen Ioana Iuhos, Nicolae Bal
(TU Cluj Napoca, Romania)
The Blind Hole Influence In The Residual
Stresses Determination
Nicolae BAL, Carmen Ioana Iuhos, Carmen Bal
(TU Cluj Napoca, Romania)
Maximum Amplitude of Solutions on a Ball
for a Generalized Lane-Emden Equation
Abeer YASIN (U. Western Ontario, Canada)
Optimal Vibration Control of Smart Fibre
Reinforced Polymer Spherical Shells
Debabrata CHAKRABORTY, Tarapada Roy
(Indian Inst. Tech. Guwahati)
A Numerical Method for Studying Thermal
Deformation in 3D Double-Layered Thin
Films with Imperfect Interfacial Thermal
Contact Exposed to Ultrashort-Pulsed Lasers
Runzhou Liu, Weizhong DAI (Louisiana Tech.
U., Ruston)
Numerical Analysis of a Transversal Crack in
a Steel Slab
Frantisek KAVICKA, Jana Dobrovska, Karel
Stransky, Bohumil Sekanina, Josef Stetina (Brno
U.T., Czech Rep.)
Delamination Analysis At Free Edges Of
Composite Laminates Bosko RASUO. Mirko
Dinulovic (U. Belgrade, Serbia)
Fracture And Fatigue Of CNT-Reinforced
Composites Z.H. Zhang, N. Allen YU, M.M.
Huang, K.K. Hsu (Yuan Ze U., Taoyuan)
Session 15b METAL 5
Thursday 6:00PM-9:00PM Ballroom 1
Chairs: K. Jagannath, M. Sob, B. Fischer,
Xiulan Hu
Strength And Magnetism Of Nanocomposites
Formed By 3d-Metal Nanochains Embedded
In A Non-Magnetic Matrix Mojmir SOB
(Masaryk U., Brno, Czech Rep.), T. Kana
(ASCR, Czech Rep.)
Further Development Of Oxide Dispersion
Hardened Platinum Alloyswith Improved
Strength At High Temperatures Bernd
FISCHER (U. Applied Sciences, Jena, Germany),
Uwe Jantsch, Michael Koch (Hanau, Germany)
Strengthen Mechanism Of In Situ TiB/TiC
Reinforced Ti 1100 Composites And Finite
Element Analysis Fei ZHAO (Shanghai
Jiaotong U., China), Xiaolu Gong (UT Troyes,
France), Di Zhang (Shanghai Jiaotong U.) A Novel Discharge Technique For Noble.Metal
Nanoparticles Xiulan HU, Osamu Takai, Nagahiro
Saito (Nagoya U., Japan) Wed-Fri
Evolution Of Goss Orientation During Rapid
Heating For Primary Recrystallization In Grain-
Oriented Electrical Steel Eun-Jin LEE, Sung-Ji Choi, No-Jin Park (Kumoh Nat. I.T., Gumi, S. Korea)
Effects Of Initial Microstructure On The
Development Of Microstructure And Mechanical
Properties In Energy Saving AZ31 Magnesium
Alloy During Hot Rolling No-Jin PARK, Sun-Hea
Hwang and Chang-Wan Ha (Kumoh Nat. I.T., Gumi, S. Korea)
Volatile Organic Compound Gas Sensor Based On
Meso-/Macro Porous Semiconducting Metal Oxide
Duc Hoa NGUYEN, Sherif A. El-Safty (NIMS,
Ibaraki, Japan) chair
Stir Casting Technique For Low Melting Point
Metal Matrix Composites And Characteristic Study
K. JAGANNATH, S.S. Sharma, N.S. Mohan, P.R.
Prabhu (Manipal, India)
Thermomechanical Structuring Of Steel For
Fabrication Of Ultrafine Grained Or
Nanocrystalline Materials Maria Z. BORISOVA, S.P. Yakovleva, S.N. Makharova(Yakutsk, Russia)
Session 15c MAGNETIC 9
Thursday 6:00PM-9:00PM Ballroom 1
Chairs: Jon-Ho Jeun, P. Yarlagadda, J.M. Kim
Effect Of Substrate Temperature On Physical
Properties Of Nanostructured Cds Thin Films
Prepared By Spray Pyrolysis Technique
N. Memarian, S.M. Rozati (U. Guilan, Iran) Thurs-Fri
Static And Dynamic Strain Sensing Using A Polymer
- Carbon Nanotube Film Strain Sensor Michael K. Njuguna, Cheng Yan, John M. Bell, Prasad
YARLAGADDA(Queensland U.T., Brisbane,
Australia) Thurs-Fri
Effect Of CdSe Nanoparticle In P3HT:PCBM
Organic Solar Cell Mijung CHOI (Myongji U.,
Gyeonggi, S. Korea), Honghong Fu, Weiling Luan (East China U.Sci.Tech., Shangha), Yong-Sang Kim
(Myongji U.) Wed-Fri
Organic Thin Film Transistor Memory Based On
CdSe Nanoparticle/PMMA Blend as a Tunneling
Layer Jung-Min KIM, Dong-Hoon Lee, Jun-Ho
Jeun, Hyun Ho Lee (Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U., Chungbuk,
S. Korea), Yong-Sang Kim (Myonggi U.) Wed-Fri
Microfluidic PCR CHIP Integrated With MCU
Controlled Temperature System
Dawoon HAN, Mijung Choi, You-Cheol Jang, Kamrul Islam, Rohit Chand, Sandeep K. Jha (Myonggi U.,
Gyeonggi, S. Korea), SungSik Ko, Ik-Jun Yeon
(Chungju N.U., Chungbuk, S. Korea), Yong-Sang Kim (Myunggi U.) Wed-Fri
A Study Of The Hysteresis Mechanism Of Organic
Thin Film Transistor With Poly(4-Vinylphenol)
Gate Insulator Jon-Ho JEUN, Jung-Min Kim, Dong-
Hoon Lee(Myongji U., Gyeonggi, S. Korea), Sung Sik
Ko, Ik-Jun Yeon (Chungju N.U., S. Korea),Yong-Sang Kim (Myongji U.) Wed-Fri
Physicotechnological Peculiarities Creating A New
Class Of Piezoelectric Materials Based On The
Hybrid Of Matrix Nano- And Micropiezoelectric
Composites M.K. Kerimov, M.A. Kurbanov, A.A.
BAYRAMOV, I.S. Sultanakhmedova, F.N. Tatardar,
A.A. Mextili, G.Ch. Gulieva, I.N. Orudjev (Nat. Acad.
Sci, Azerbaijan)
Session 15d NANO 7
Thursday 6:00PM-9:00PM Dalian Room
Chairs: B. Suresha, H. Musa, A.N. Banerjee, H. Hamdy, N.M. Renukappa
Synthesis And Characterisation Of Polymer-Stabilised AuNP
Haruna MUSA (Bayero U., Nigeria), Terence Cosgrove (U. Bristol, UK),
Erol A. Hasan (U. Liverpool, UK), Abdullahi A. Kogo (Ahmadu Bello U.,
Zaria, Nigeria), Hamza Abba (Ahmadu Bello U.)
Effect Of Low-Aspect Ratio On The Enhanced Field-Emission
Properties Of Densely-Packed Ni-Nanowire Arrays Electrochemically
Grown Through Porous Alumina Membrane Arghya N. BANERJEE,
Sang Woo Joo (Yeungnam U., S. Korea)
Fabrication of Transparent TiO2 Nanotubes-Film on FTO Glass By An
Electrophoretic Deposition Process Yulong LIAO, Wenxiu Que, Jin
Zhang, Peng Zhong (Xi’an Jiaotong U., China)
Cr Nanostructures Fabricated Based On Porous Anodic Alumina
Membranes Hany HAMDY (Beni-Suef U., Egypt), Sang-Wan Ryu
(Chonnam N.U., Gwangju,S. Korea), Mohamed Shaban (Ben-Seuf U.)
Strain Rate Effect On The Mechanical Properties Of Carbon
Nanotube/Epoxy Composites Yi-Ming JEN (Nat.Taiwan Ocean U.,
Keelung), Chien-Yang Huang, Pei-Ling Guo,Yung-Chuan Wang (Chung
Hua U., Hsinchu)
Properties Of Compression Moulding Starch –Nanoclay Biocomposites
Ahmad ZURAIDA, H. Anuar (IIUM, Kuala Lumpur, Malaysia)
Role Of Silicon Dioxide Filler On Dry Sliding Wear Behaviour Of
Epoxy Nanocomposites B. SURESHA, R.M. Devarajaiah
(Nat.Inst.Engrg., Mysore, India), K.N. Shivakumar (NCAT, Greensboro,
NC), Kishore (Indian Inst.Sci., Bangalore), S. Seetharamu,P.
Sampathkumaran (Central Power Res.Inst., Bangalore)
Effect of Montmorillonite Nanoclay Filler on Surface Degradation
Properties of Epoxy-Based Nanocomposites N.M. RENUKAPPA,
Rashmi, C. Ranganathaiah,Siddaramaiah (Mysore, India)
Session 15e GENERAL 15
Thursday 6:00PM-9:00PM Hangzhou Room
Chairs: W. Kong , W.B. Wan Nik, B.K. Ghosh, A.K. Tyagi,
Fabrication of Conjugated Polymer and Metal Nanoparticle
Composites toward Sensing Applications
Hsing-Lin WANG, Ping Xu, Chen-Yu Kuo, Nathan H. Mack(Los Alamos
N.L., NM)
Grown Ambient Effect In Gan Crystalline Quality On Si(111) By
MOVPE
Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)
Chemistry Of Some Oxide Based Nanomaterials For Energy
Conversion Applications
A.K. TYAGI (Mumbai, India) INVITED 25 min
SOM Based Segmentation Method to Identify Water Region in
LANDSAT Images
Win KONG, V.J. Tiagrajah (U. Tenaga Nasional, Selangor, Malaysia)
Monitoring Composite Blade of Vertical Axis Wind Turbine using Self
Organizing Map
Ming Li, Ayo ABATAN (Miami U., Oxford, Ohio)
Increasing The Octane Number Of Gasoline Using Praseodymium(Iii)-
Ethylene Diamine Tetra Acetate/Activated Clinoptilolite Zeolite
Dewi TRISTANTINI, Eny Kusrini, Vino Hasyim (U. Indonesia, Depok)
Friction Coefficients Of Boron Mixed Brake Pads
A.M. Muzathik, Y.B. Mohd Nizam (U. Malaysia Terengganu), Y. Prawoto
(U. Moratuwa, Sr. Lanka), M.F. Ahmad, W.B. Wan Nik (U. Malaysia
Terengganu)
Thermoplastic Elastomer Composites for Barrier Applications
Junling ZHAO (Goodyear Tire & Rubber, Akron, OH)
Session 16a MATH 16
Friday 8:00AM-10:30AM Ballroom 1
Chairs: Yin Yu, K.M. Gupta, R.H. Oskouei,
H. Abral
Effect Of Poisson’s Ratio On Flexibility Of
Smooth Orthotropic Pipe Bend
K. M. GUPTA (Motilal Nehru Nat.Inst.Tech.,
India)
Load-Displacement Behaviour of AA 7075-T6
Holed And Clamped Plates At Different
Environmental Temperatures R.H.
OSKOUEI, Joe Elambasseril, R.N. Ibrahim
(Monash U., Clayton, Australia)
Tensile Strength of Pandanus Odoratissimus
Fibers Reinforced Unsaturated Polyester
Composite Hairul ABRAL, Heri Andriyanto,
Ilhamdi (U. Andalas, Indonesia)
Meshless Methods For The Quasi-3d Analysis
Of Functionally Graded Elastic Cylinders
Chih-Ping Wu, Shih-Wei Yang (Nat. Cheng
Kung U., Tainan)
Modeling Of Creep Behaviour Of A
Composite Material Ahmed KOUADRI-
Boudjelthia (Chlef, Algeria), A. Bouabdallah
(Algiers, Agleria), M. Tahar Abbes (Chlef,
Algeria)
Effect of Debonding Damage on the
Mechanical Properties of a Particulate
Reinforced Dental Composite Y.P. CHAN,
C.Y. Tang (Hong Kong Poly U., China) Thurs-
Friday
The Research Of Debonding Damage
Identification For Foam Core Sandwich Using
Wavelet Packet Energy Method Yin YU, Hai
Wang (Shanghai Jiaotong U., China), Ai-ying
Zhao (COMAC, Shanghai, China) Thurs-Fri
Nonlinear Modeling And Optimization Of
Parameters For Viscoelastic Composites
AnNanocomposites Brian Dandurand, Irina
VIKTOROVA (Clemson U., SC), Sofia Alexeeva
(Moscow, Russia)
Session 16b METAL 6
Friday 8:00AM-10:30AM Ballroom 2
Chairs: J. Purmensky, P.S. Robi, Y. Kobayashi,
Mechanical Properties of Al-Cy-Mg Alloys
Micro-Alloyed with Sn P.S. ROBI, A.
Srinivasana, Sanjib Banerjee (Indian I.T.,
Guwahati)
Characteristics of CrAlSiN Coatings With
Post-Deposition Annealing Treatment
Wei-Yu HO, Chi-Wei Chen, Chia-Hang Tsai, Da-
Yung Wang (MingDao U., ChangHua)
Residual Stress Measurement On 2024
Aluminum With Different SMAT Treatments
Hao JIANG, Ka Po Cheung, Limin Zhou (Hong
Kong Poly U., China), Jian Lu(City U., Hong
Kong, China)
Metal-Metal Bonding Process Using Copper
Nanoparticles
Yoshio KOBAYASHI, Satoshi Ishida, Kazuaki
Ihara (Ibaraki U., Japan), Yusuke Yasuda,
Toshiaki Morita (Hitachi Ltd, Japan) Wed-Fri
Phase Separation Related To Medium Range
Order In Crystallization of Al83Ni8Si2Ce7
Metallic Glass Shanghai WANG, C.C. Yang
(Hebei U. Engineering, Handan, China)
Effects Of Electro-Discharge Machining
Parameters On Surface Integrity Of
Aluminium Composite
A.M. ABDUL-RANI, A. Mouangue Nanimina
(U.T. Petronas, Perak, Malaysia)
Structure And Mechanical Properties Of
Ultra-Fine Grain Titanium
Miroslav Greger, Jaroslav PURMENSKY (T.U.
Ostrava, Czech Rep.) An Analysis Of The Transverse Strength Of Ti-
Based Matrix Composite Reinforced By SiC Fiber Bing ZHAO, HongLiang Hou, JinHua Liao, Bo Jiang
(Beijing Aero. Manuf.Res.Inst., China)
Session 16c CHEM 5
Friday 8:00AM-10:30AM Ballroom 3
Chairs: T. Ngai, C.Y. Low, V.R. Gaval, S.K.
Varma
Pressure-Volume-Temperature Of Neat
Polyvinyl Alcohol And Blending With
Cassava Starch Compound
Chong-Yu LOW, Tin-Sin Lee (UTAR,
Kuala Lumpur, Malaysia)
Effect Of Particle Size And Concentration
Of Mica On Properties Of
Polytrimethylene Terepthalate Vivek. R.
GAVAL, R.S.N. Sahai, S.P. Deshmukh, P.A.
Mahanwar (Inst. Chem. Tech., Mumbai,
India)
Effect of Cr on the Oxidation Resistance
Of Nb-Cr-Mo-Si-B Alloys S.K.
VARMA, Benedict Portillo (U. Texas El
Paso)
The Effects of Functionalized Graphene
Sheet on The Properties of Poly (ethyl
methacrylate) Su-Jin HAN, Seong Min
Oh, Hyung-il Lee, Han-Mo Jeong (U.
Ulsan, S. Korea)
Fire Retardation Effect Of Graphite
Oxides On Epoxy Resin Kyung Min OH,
Yu Rok Lee, Soon Cheol Kim, Hyung-il
Lee, Han-Mo Jeong(U. Ulsan, S. Korea)
Hierarchical Porous Materials
Templating from Nanoparticle-Stabilized
Emulsions
To NGAI, Zifu Li (Chinese U. Hong Kong) Stimuli-Responsive Polymer Nanofiber with
Inorganic Nanoparticle Wen-Ju CHUANG,
Wen-Yen Chiu (Nat. Taiwan U., Taipei) Wed-Fri
Session 16d BIO 5
Friday 8:00AM-10:30AM Dalian Room
Chairs: Liming Xu, R.H. Schuster, A. Aldalbahi, Chao Lin
Fabrication of Poly(propylene carbonate)/Gelatin Composite via
Layer-by-Layer Assembly for Cytocompatibility Assessment
Xia ZHONG, Fariba Dehghani (U. Sydney, Australia)
Preparation And Characterisation Of Conducting Biopolymer-Carbon
Nanotube Composite Materials Ali ALDALBAHI, Marc in het Panhuis
(U. Wollongong, Australia)
Are NHANES Reference Data Applicable to the Taller Canadian
Children? FILLER, Abeer Yasin (U. Western Ontario, Canada)
Multifunctional Cationic Superparamagnetic Nanoparticles For Gene
Delivery And Imaging Chao LIN (Tongji U., Shanghai, China),
Qianqian Ma (Tongji Hospital), Bo Lou (Tongji U.)
Nanocomposite Thin Layers Synthesized By Advanced Pulsed Laser
Technologies For Biomimetic Implant Coatings
Ion N. MIHAILESCU (Ilfov, Romania)
Noise Corrected Imaging Plate Scanner – An Ideal Electron Detector
For Transmission Electron Microscopy Petra BELE (TU Munich,
Germany)
In Vivo And In Vitro Toxicity Of Ag-Nps-Containinghydrogel In
Reproductive Organs And In Hela Cells Liming XU, Liang Chen,
Xuefei Li, Zhe Dong (Nat. Inst Food Drug Control, Beijing, China), Gang
Wu (Inner Mongolia U. Sci Tech, Baotou, China),Chunren Wang, Tingfei
Xi (Beijing, China) Metal On Metal Bearings: Evaluation Of The Potential Risks In Clinical Use
And The Associated Data Management Issues Challenging Prospective Risk
Analysis James Smith, eter Smitham, Liping Qi, Simon GRANGE (U. Calgary,
Canada)
Session 16e GENERAL 16
Friday 8:00AM-10:30AM Hangzhou Room
Chairs: R.S.N. Sahai, F.A. Harraz, Y.F. Luo, A.A. Ali
Silicon-Conjugated Polymers Nanocomposites Fabricated By A Two-
Step Electrochemical Approach
Farid A. HARRAZ, Aliaa M. Salem (CMRDI, Cairo, Egypt)
Characterization Of Carbon Fibres Reclaimed From Steam-Thermal
Recycling Process
Shengyin YE, Arezki Bounaceur, Yannick Soudais, Radu Barna (Ecole des
Mines d’Albi, France)
Important Design Elements of Large Flexible Ferris Wheels
Yongfeng LUO, Jie Bai, Xiaonong Guo (Tongji U., Shanghai, China)
Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core
Inductors Awad Kh. Al-ASMARI (King Saud U., Saudi Arabia), Ashraf
A. Ali (Al-Khari U.,Saudi Arabia)
Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential
Application for Micro Surface Mounted Components Ashraf A. ALI (Al-Kharj U., S. Arabia),Awad Kh. Al-Asmari (King Saud
U., Saudi Arabia)
Nano Loop Optical Antenna
Hengjiang Ren, Zhongxiang SHEN (Nangyang T.U., Singapore)
Effect of Particle Size And Concentration Of Fly Ash On Properties Of
Polyester Thermoplastic Elastomer Composites
R.S.N. SAHAI, V.R. Gaval, P.A. Mahanwar (Inst. Chem Tech., Mumbai,
India)
10:30AM-11:00AM Coffee Break
Session 17a OXIDE 4
Friday 11:00AM-1:30PM Ballroom 1
Chairs: M. Truccato, Xiaoyan Peng,
Y. Nakamura, K. Uchiyama
Fabrication Of Intrinsic Josephson Junctions
Stacks And Loosely Bound Atoms In
Superconducting Oxides Marco TRUCCATO,
Angelo Agostino, Stefano Cagliero (Torino U.,
Italy), Holger Motzkau, Andreas Rydh, Vladimir
Krasnov (Stockholm U., Sweden) INVITED
Stimuli-Responsive Periodic Micro Structures
On Oxide-Polymer Hybrid Films
Masahide TAKAHASHI, Yasuaki Tokudome
(Osaka Prefecture U., Japan) INVITED
Li1.6[MnM]1.6O4 (M=3d Transition Metal)
Spinel Type Manganese Oxides Prepared By
Hydrothermal Method Kang-Sup CHUNG
(Korea Inst. Geosci. & Min Res., Daejon, S.
Korea), Wonjin Moon, Kyoungshin Lee,
Byungkyu Park (Korea Basic SCi Inst,
Suncheon), Sujin Pang (Chonbuk Nat. U.), Soon-
Ki Jeong (Soonchunhyang U.), Hyejin Seo,
Daehee Won (Suncheon Nat. U.), Yangsoo Kim
(Korea Basic Sci Inst., Suncheon)
Growth of Catalyst-free SiC and SiC/SiO2
Nanowires using the Precursor of
Methyltrichlorosilane Yoo Youl CHOI, Doo Jin
Choi (Yonsei U., Seoul, S. Korea)
Structural Degradation And Sensing
Properties Of ZnO Nano Films
Xiaoyan PENG, J. Chu, M. Sajjad, P.X. Feng (U.
Puerto Rico, San Juan)
Rheological Properties Of Polyethylene-
Copper Oxide Composites
`Tiam-Ting TEE, Tin-Sin Lee, Yew-Sing Chin
(UTAR, Kuala Lumpur, Malaysia)
Microstructure of Magnetron Sputtered ZnO
Films on Glass Substrate
Shiuh-Chuan HER, Tsung-Chi Chi (Yuan Ze
Univ., Chung Li)
Session 17b MAGNETIC 10
Friday 11:00AM-1:30PM Ballroom 2
Chairs: F.c. Meng, J.A. Perez, Z.A. Talib,
Keryn Lian
Effect of Injection Molded
Nanoparticle/Polymer Composites on Their
Electrical Properties Haihong WU, Tiecheng
Li (Henan U.T., Zhengzhou, China), Aiyun Jiang,
Baofeng Zhang (Huanghe Sci.Tech. U., China)
Carbon Naotube Composite Films With
Switchable Transparency Fancheng MENG,
Xiaohua Zhang, Geng Xu, Zhenzhong Yong,
Hongyuan Chen,Minghai Chen, Qingwen Li
(Suzhou Inst Nanotech & Nanobionic, China),
Yuntian Zhu (N.Carolina St.U., Raleigh)
Phase Transition And Magnetic Properties Of
Ferromagnetic Shape Memory Fe66Pd30Rh4
Alloys Chien-Feng LIN, Jin-Bin Yang (Nat.
Kaohsiung First U. Sci Tech.)
Optical Properties Dependence As Function
Of The Temperature In Aln Films Deposited
By PLD Jaime A. PEREZ, H. Riascos (U.T.
Pereira, Colombia), J.C. Caicedo (U. Valle, Cali,
Colombia), L. Yate (U. Barcelona, Spain)
Beyond Complementary Metal Oxide
Semiconductor (CMOS): Materials and
Engineering Arezki BENFDILA (Univ. M.
Mammeri, Algeria)
Structural and Electrical Properties of Tin
Selenide Film Z.A. Talib, J.Y.C. Liew, W.M.M.
Yunus, Z. ZAINAL, S.A. Halim (U. Putra
Malaysia, Selangor)
Biomaterial Aisi 316l Ss Surface Film Analyses
After Electropolishing Treatments Under
Varied Magnetic Fields Tadeusz
HRYNIEWICZ, K. Rokosz (Koszalin, Poland)
Polyoxometalates - Carbon Nanotubes
Composites For Electrochemical Capacitors
Tahmina Akter, Gurvinder Bajwa, Keryn LIAN
(U. Toronto, Canada) Thurs-Fri
Session 17c INFRA 9
Friday 11:00AM-1:30PM Ballroom 3
Chairs: Con Y. Adam, S.I. Zaki, Q.H. Fang,
D. Matesan
The Use Of Nanocomposites To Develop The
Microstructure And Impermeability Of High
Performance Concrete Saaid. I. ZAKI ,
Khaled. S. Ragab, Alaa. M. Rashad (HBRC,
Cairo, Egypt)
Pultruded Natural Fibre Reinforced
Composites: Preparation, Properties and
Applications HAZIZAN Md Akil, Hafiz Zamri,
Helfy Affzan Shahidan, Zainal Arifin Mohd
Ishak, Azhar Abu Bakar (U. Sains Malaysia,
Penang) The Distributions Of The Interfacial Shear Stress
For A Single Cord/Rubber Composite In Pulling
Out Process Under Thermal Conditions Qinghong
FANG, Taimin Cheng, Huibin Wang, Baozong Huang
(Shenyang U. Chem.Tech., China), David Hui (U.
New Orleans)
Preparation Of Clinker Cementitious
Materials By Re-Melting Steel Slag
Hui LI, Delong Xu, Yong Min, Yuxiang Li, Yang
Qiu, Hongyuan Peng (Xi’an U.Architecture &
Tech., China) Discussion of Some Issues For Building Integrated
Photovoltaics (BIPV) in Architectural Design In
China Changhai PENG, Ying Huang , Zhishen Wu
(Southeast U., Nanjing,China)
Strength Capacity Of One-Way Continuous
Reinforced Concrete Slabs Domagoj Matesan, Jure
Radnic, Nikola GRGIC, Vatroslav Camber (U. Split, Croatia)
Effect Of Finger Joint Size And Orientation On The
Tension Strength Of Eucalyptus
Regnans/Delegatensis Con Y. ADAM, B M Ahmed
(Monash U., Melbourne, Australia)
Strengthening of Reinforced Concrete Beams using
Carbon Fiber Sheets bonded with
Cement-Based Mortars. Abdullah Hilal Al-SAIDY
(Sultan Qaboos U., Oman)
Session 17d NANO 8
Friday 11:00AM-1:30PM Dalian Room
Chairs: I. Kratochvilova, X. Bokhimi, B. Zhang, V. Koerstgens
Processing Of Nanomaterials In The C-B-N System
Raj N. SINGH (U. Cincinnati, OH)
Effect of the Activation Atmosphere on the Gold-Support Interaction in
Au/Rutile Catalysts Xim BOKHIMI, Rodolfo Zanella, Antonio Morales,
Viridiana Maturano, Carlos Angeles (UNAM, Mexico DF)
Facile Preparation And H2 Separation Of Multi-Walled Carbon
Nanotube Buckypaper Membranes With Tunable Pore Sizes
Xiaoshuang YANG, Lixiang Yuan, Andrew I. Minett, Andrew Harris (U.
Sydney, Australia)
Semicrystalline Polyimide/Mwcnt Hybrid Nanocomposites:Structure,
Dynamics, And Properties Baode. ZHANG (Harbin I.T., China), V. A.
Bershtein (Ioffe, Russia), T.E. Sukhanova (ST. Petersburg, Russia),
Wanchen. Zang (Jilin U., Changchun, China),P.N. Yakushev (St.
Petersburg), Yao. Li (Harbin I.T.), Chunhai. Chen (Jilin U.), L.M. Egorova,
I.V. Gofman , G. N. Gubanova, A. Y. Volkov, M. E. Vylegzhanina (St.
Petersburg)
Flow Induced Surface Attachment Of Gold Nanoparticles – An In Situ
X-Ray Investigation With Micro-Fluidic Cell Volker KOERSTGENS,
Monika Rawolle (TU Muenchen, Germany), Adeline Buffet, Gunthard
Bennecke, Gerd Herzog, Jan Perlich, Matthias Schwartzkopf (DESY,
Hamburg, Germany), Martin Trebbin, Julian Thiele,Sebastian With (U.
Bayreuth, Germany
Toughening Epoxy Thermosets And Their Carbon Fibre Reinforced
Composites With Electrospun Nanofibres Jin Zhang, Tong LIN,
Xungai Wang (Deakin U., Geelong, Australia)
Fluorescence of Variously Terminated Nanodiamond Particles
Irena KRATOCHVILOVA, A. Kovalenko, V. Rezacova, L. Fekete, F.
Fendrych,S. Zalis (Prague), V. Kocka (Charles U., Prague), M. Ledvina, P.
Cígler, J. Stursa (Prague), M. Nesládek (Diepenbeek, Belgium)
Session 17e GENERAL 17
Friday 11:00AM-1:30PM Hangzhou Room
Chairs: C.N. Suresha, Yulong Wang, J.F. Shu, A.M. Eleiche
Improved Interfacial Strength of SMA Composite With Nanotreated
Fibre Surface
Yulong WANG (Hong Kong Poly U., China), Zhenqing Wang (Harbin I.T.,
China), Limin Zhou (Hong Kong Poly U., China)
Study of the Efficiency of UV and Visible-Light Photocatalytic
Oxidation of Methanol on Mesoporous RuO2-TiO2 Nanocomposites
Adel A. ISMAIL (CMRDI, Cairo, Egypt), Detlef W. Bahnemann (U.
Hannover, Germany)
Micro-Nano Mineral Study And New Mineral Discovery
Jinfu SHU (Carnegie Inst. Of Washington, DC), Jingsui Yang, He Rong
(Inst of Geology, Beijing), Ho-kwang Mao (Carnegie Inst.)
Design Of A Polyamide Composite For High Speed Sliding Conditions
A.M. ELEICHE (King Fahd U. Pet Min, Dhahran, S. Arabia), M.O.A.
Mokhtar (Cairo U., Egypt), E.S. Nasr, G.M.A. Kamel
Characterization Of The Durability Of Surface Treatments Used In
Adhesive Bonding
Susan PITT, Daren Peng, Rhys Jones (Monash U., Australia)
Development of Composite Structural Parts for a Vertical-axis Wind
Turbine Tai-Yan KAM, H.M. Su, R.R. Chang, F.M. Lai, J.H. Wu (Nat.
Chiao Tung U., Hsinchu)
Controlled Synthesis of Sb Nanostructures and Their Conversion to
CoSb3 Nanoparticle Chains for Li-Ion Battery Electrodes Jixin Zhu,
Qingyu YAN (Nanyang T.U.,Singapore)
Development Of A Model For Online Monitoring Of Friction Stir
Welding Using Acoustic Emission Technique C.N. SURESHA, B.M.
Rajaprakash B M, Upadhya Sarala (U. Bangalore, India)
1:30PM-2:30PM Lunch
Session 18a TEXTILE 4
Friday 2:30PM-5:00PM Ballroom 1
Chairs: Wen-Ju Chuang, Shuai Jin, H.N. Tran,
An Du
Study On Test Method For Shear Properties
Of Minisize Rod―Z-Pin Ning Li, J. XIAO
(NUAA, Nanjing, China)
Effects Of Ultraviolet Aging On The
Mechanical Properties Of Hemp Fibers
Shuai JIN, Xiaolu Gong (U.T. Troyes)
Mechanical Properties Of Unidirectional Jute
Fiber Reinforced Poly(Butylene Succinate)
Biodegradable Composites Huu Nam TRAN,
Shinji Ogihara (Tokyo U. Sci., Japan)
Water Permeation In Polylactide And
Polylactide/Montmorillonite Composites
An DU, Donghun Koo, Mary Ziegler, Richard A.
Cairncross (Drexel U., PA), Genaro Gelves,
University of Calgary, Calgary Advanced Application Of Natural Fibres In High
Performance Automotive Composite Structures
V.R Soroush, Hessam GHASEMNEJAD, D.R.
Marchant, A. Aboutorabi (Kingston U., London, UK)
Chemically Modified Glass and Cotton Fibres
Reinforced Polyester Resins
A.A. KOGO, O.K. Sunmonu, E.G. Kolawole (Ahmadu
Bello U., Zaria, Nigeria)
Effect Of Coupling Agent On The Interfacial
Properties of 3D Ramie/Polypropylene Composites
Yang SHEN,Jianmeng Zhao, Nanting Zhou, Qian Zhang, Xiaomeng Fang, Yiping Qiu (Donghua U.,
Shanghai, China)
Session 18b INFRA 10
Friday 2:30PM-5:00PM Ballroom 3
Chairs: Jinmiao Tan, Min Li, Y.Yu,
Sing-Ping Chiew Preparation And Thermal Properties Of Expanded
Graphite/ Organic Montmorillonite /Paraffin
Composite Phase Change Materials Jinmiao TAN, Min Li, Zhishen Wu (Southeast U., Nanjing, China)
Preparation And Performance Montmorillonite
/Polyacrylamide Composite Materials Min LI, Meirong Chen, Zhishen Wu (Southeast U., Nanjing,
China)
Effect of Basalt Fiber-Wood-Plastic composite by
Added MAPE Yong WANG, Jinxiang Chen,
Chenglong Gu, Juan XIE, Sujun Guan (Southeast U.,
Nanjing, China)
Experiments On CFRP Strengthened Steel Beams
With Different Laminate Ends
Yi YU, Sing-Ping Chiew (Nanyang T.U., Singapore)
Thurs-Fri
RC Columns With High Cross-Sectional Aspect
Ratio Wrapped With Glass Fiber Reinforced
Polymer Sheets Sing-Ping CHIEW, Yi Yu (Nanyang
T.U., Singapore) Thurs-Fri
Fiber Composite Application To Protect Bridge Pier
Caps From Corrosion Related Deterioration In New
England K. Wayne LEE, Rachel Nichols (U. Rhode Island, Kingdton, RI), Craig M. Boyer (Electric Boat),
P. Balaguru (Rutgers, NJ), C. Franco(Rhode Island
Dept of Trans.) Friday PM
The Experimental Study For FRP Flange Structural
Characteristics M. WANG, Z.M. Huang (Tongji U.,
Shanghai, China)
Performance Of Concrete Columns Reinforced By
Steel-Frp Composite Bar Under Static Loading And
Dynamic Excitation Ze-Yang SUN (Concrete & Prestressed Lab, Nanjing), Gang Wu, Sheng-Ze Yang,
Zhi-Shen Wu (Southeast U., Nanjing, China)
Session 18c COMPOSITES 3
Friday 1:30PM-4:00PM Ballroom 2
Chairs: J. Kong, L. Feo, A. Dacko, J. Wolodko
Nanocomposite Films Exhibiting Self-
Assembled Alternating Layers
Wan-Yu WU (Mingdao U., Changhua)
Stable Photocatalytic Properties Of Lithium
Niobate Spheres For The Degradation Of
Organic Pollutants Jingling LIU, Dae Joon
Kang (Sungkyunkwan U., Suwon, S. Korea)
Failure Estimate Of Layered Fiber-Metal
Laminates Using Experiment And Finite
Element Techniques Adam DACKO (Warsaw
U.T., Poland)
Effect Of Orientation Of Axis Of Symmetry
For Orthotropic Media Containing An
Elliptical Inhomogeneity On Elastic Field
G.N. WANG, G.H. Nie (Tongji U., Shanghai,
China), C.K. Chan (Hong Kong Poly U., China)
Research Progress of Secondary Bending in
Composite Joints Yuan Fa, Guoqing Yuan
(Tongji U., Shanghai, China)
Structural Design Optimization Of A Desktop
Machine Tool For Machining Ti Alloy By
Using Taguchi Method Based Sequential
Algorithm Sung-Hyun Jang , Sang-Hwa Lee
(Changwon N.U., S. Korea), Jay Kim (VATECH,
Gyeongsangnam, S. Korea), Young-Hyu Choi
(Changwon N.U.)
Fe3O4 / Thermo-Responsive Polymer Composite Nanofibers Shih-Ru HUANG, Wen-Yen Chiu, King-Fu Lin (Nat. Taiwan U., Taipei)
Feedstock and Processing Effects on the
Performance of Natural Fiber Thermoset
Composites John WOLODKO, Kirill Alemaskin,
Aaron Fuhr, Lisa Sopkow (Alberta Innovates,
Edmonton, Canada) Tuesday-Fri
Session 18d NANO 9
Friday 2:30PM-5:00PM Dalian Room
Chairs: SeungWook Shin, Y. Wang, Liqiang Mai, Xiuchun Yang
Modifying Polylactide and Polycarbonate Green Blends for Durable
Applications
Yeh WANG, T.-F. Hung, S.M. Chiao (Tunghai U., Taichung) INVITED 25
min Friday
Mechanical Properties Of Spark Plasma Sintered Al2O3-ZrO2-TiO2
Composites Ipek Akin, Filiz Sahin, Onuralp Yucel, Gultekin GOLLER
(Istanbul T.U., Turkey)
Layered Oxide Nanowires For High-Energy Lithium ION Batteries
Liqiang MAI, Lin Xu, Xu Xu, Chunhua Han, Yanzhu Luo (Wuhan U.T.,
China)
Surface Plasmon Resonance Of Ag Nanocrystallines In Opaa Template
Shanshan Han, Xiuchun YANG, Yan Liu, Junwei Hou, Xiaoning Li, Wei Lu
(Tongji U., Shanghai, China)
Atomic Mobility, Freezing, And Superconductivity In Arrays Of
Metallic Particles Within Nanoporous Matrices
Elena V. CHARNAYA (Nat. Cheng Kung U. and St.Petersburg St.U.),
Cheng Tien, M. K. Lee (Nat. Cheng Kung U.), D.Y. Xing (Nanjing U.,
China), B.F. Borisov, Yu. A. Kumzerov (Ioffe Physico, St. Petersburg,
Russia)
Synthesis of Cu2ZnSnS4 Quaternary Nanocrystal Formed by Annealing
Precursors Prepared by Microwave-Assisted Solution Method
SeungWook Shin, JunHee Han(KAIST, Daejeon, S. Korea), ChanYoung
Park, Jong-Ha Moon (Chonnam N.U., Gwangju, S. Korea), JeongYong
Lee (KAIST), JinHyeok Kim (Chonnam N.U.) Thurs-Fri
Sol Gel Derived Bioactive Glass Nanoparticles in the SiO2-CaO-MgO-
P2O5 System M.R. SAERI, A. Doostmohammadi (Shahrekord U., Iran)
Thurs-Fri
Effects Of Diameter And Stone-Wales Defect On The Functionalization
Of Single-Wall-Carbon Nanotubes By Amine Group Jun CHEN,
Bessem Ben Doudou, Alexandre Vivet, Gerard Nouet, M’hamed Ayachi (U.
Caen, France)
Session 18e GENERAL 18
Friday 2:30PM-5:00PM Hangzhou Room
Chairs: Ping Yang, H. Anuar, Rusli, Marek Burda
Optimal Design of Molded Bark Particleboard Used in Heated
Flooring System by using Finite Element Analysis Ping YANG
(Kumamoto U., Japan), Hidefumi Yamauchi (Akita Pref. U., Japan), Hikaru
Sasaki (Helix Ltd, Akita, Japan)
Laser Repair Hardfacing Of Titanium Alloy Turbine Blades
Andrzej A. KlimpeL, Marek BURDA (Silesian U.T., Gliwice, Poland)
Energy Harvester Device For Charging Applications
A.R. AKANDE, A. Nechibvute, P.V.C Luhanga (U. Botswana)
Mechanical Properties Of Injection Moulded Polylactic Acid – Kenaf
Fibre Biocomposites
Hazleen ANUAR, A. Zuraida (IIUM, Kuala Lumpur, Malaysia)
High Efficiency Si-nanowires/Poly (3,4-Ethylene-Dioxythiophene):
Poly(Styrenesulfonate) Hybrid Solar Cells
Lining He, RUSLI (Nanyang T.U., Sinagpore), Changyun Jiang (A*STAR,
Singapore), Hao Wang (Nanyang T.U.) Thurs-Fri
Luminescence Light Waveguide And Lasing Properties In Some Doped
II-Visemiconductor Nanowire Bingsuo ZOU, Guozhang Dai, Ruibin
Liu (Beijing Inst.Tech., China) Thurs-Friday
Smart Materials Tectonics: Development Of Solid Electrolyte
Dendrites With Micro Lattice Structures To Realize Fuel Cell
Miniaturizations Soshu KIRIHARA, Katsuya Noritake, Satoko Tasaki
and Hiroya Abe (Osaka U., Japan) Wed-Fri
Design Of Clamping Apparatuses And Testing Procedures Of A
Vertical-Axis Composite Wind Power System Feng-Min LAI, Chao-
Chieh Yang, Chen-Mao Yang, Chun-Hsiang Lan (Da-yeh U., Changhua)
Friday
July 29, 2011 Friday night BANQUET 7:00PM-11:00PM
PVG airport to our hotel, you can take subway (inside the Puding airport) No.2 line for 14 stops and get off at Century Avenue Stop. Then transfer subway No.4 line for 2 stops and get off at Yang Shu Pu Road Stop. Lastly, you can take a taxi to Wyndham Bund East Shanghai(No.25 Ning Guo Road) and the fare is around RMB15. The cost is RMB160 by taxi from PVG airport to hotel.
Our hotel name is Wyndham Bund East hotel, 上海兴荣温德姆酒店, the address is 宁国路 25 号。
top related