idctigrecad acad userguide 0812
Post on 03-Apr-2018
218 Views
Preview:
TRANSCRIPT
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
1/40
User GuideVersion 2
TigreCAD for AutoCAD
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
2/40
ofcdesk idc | TigreCAD for AutoCAD
Introduction....................................................................................................
Installing TigreCAD........................................................................................
TigreCAD features within ofcdesk idc.............................................................
Accessing ofcdesk idc and TigreCAD features.................................................
TigreCAD MEP Tool.........................................................................................
Setting Product Line........................................................................................
Starting Hydraulic Drawings ...........................................................................
Setting Units on AutoCAD..............................................................................
Setting Viewports...........................................................................................Setting Visibility Options.................................................................................
Starting the project.........................................................................................
Inserting Fittings............................................................................................
Inserting Equipment.......................................................................................
Reversing Flow...............................................................................................
Creating Plumb Lines......................................................................................
Editing Plumb Lines........................................................................................
Adding Elevation.............................................................................................
Editing Elevation.............................................................................................
Downloading and Installing Libraries..............................................................
Inserting Items...............................................................................................Using Favorites tool........................................................................................
Adding an item from the Favorites list.............................................................
Changing Dimension (2D/3D).........................................................................
Project Transition between AutoCAD, Revit and SketchUp Platforms..........
Exporting IDS File...........................................................................................
Importing IDS les.........................................................................................
Creating Bill of Materials................................................................................
Comparing Bills of Materials ...........................................................................
Setting Preferences.........................................................................................
Updating Libraries..........................................................................................
Updating ofcdesk idc and TigreCAD...............................................................About ofcdesk idc and Technical Support........................................................
Appendix A.....................................................................................................
Contact Us.......................................................................................................
4
5
9
10
11
11
12
12
1314
15
19
20
21
22
23
24
24
25
2627
28
28
29
29
30
31
33
34
36
3738
39
40
Table of Contents
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
3/40
ofcdesk idc | TigreCAD for AutoCAD
Purposeofcdesk is committed to providing high-quality materials to help
you get the most out of our products, in this document you will
learn about the TigreCAD for AutoCAD main features running
on ofcdesk idc, as well as information you should be aware of
before installing and using this product.
The appearance and information displayed in the screen and
images may vary according to product version.
Scope
The scope of this guide is restricted to the user perspective of
using TigreCAD for AutoCADfrom inside ofcdesk idc. You will
nd step-by-step instructions of interior design project processes,
with respective tasks and technical functions.
Overview
This User Guide describes how to use TigreCAD
for AutoCAD
running on ofcdesk idc.
ofcdesk idc is an excellent CAD-based solution providing
important features to reduce time and costs.
For further information and technical support, please contact:
support@ofcdesk.com
mailto:support@ofcdesk.commailto:support@ofcdesk.com -
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
4/40
ofcdesk idc | TigreCAD for AutoCAD
About TigreCAD
TigreCAD was developed for Tigre S/A Tubos e Conexes by
ofcdesk. This software was designed for hydraulic and electrical
system drawing and developing. An application for AutoCAD and
Revit MEP totally integrated in ofcdesk idc.
TigreCAD is user-friendly and provides you with special tools for
insertion, edition and quantication of Tigre products used into
drawings projected on AutoCAD and Revit MEP.
About ofcdesk idc
ofcdesk idc is a comprehensive solution for design, AEC and MEP,providing cloud-based technology, accelerating the download of
products and improving content management. An multi-platform
application, allows you to download and upload RFA, DWG and
SKP les. ofcdesk idc also includes tools for creating BOM,
Typicals and Favorites.
Reading and understanding the User Guide instructions you
will be able to get the most out ofofcdesk idc TigreCAD for
AutoCAD.
Introduction
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
5/40
ofcdesk idc | TigreCAD for AutoCAD
Go www.tigre.com.br, Produtos (a) and Downloads (b).
Click on SAIBA MAIS Lean more (b). Check box authorizing to send your name
and e-mail address to ofcdesk (c). Click on Clique aqui para baixar Click here to
download (d).
Important: You must register on Mundo Tigre (a) to download TigreCAD.
1
1
Installing TigreCAD
http://www.tigre.com.br/http://www.tigre.com.br/ -
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
6/40
ofcdesk idc | TigreCAD for AutoCAD
Click on the Run button for automatic
installation.
Click on the Next button.
On the ofcdesk website, select TigreCAD para AutoCAD - TigreCAD for AutoCAD
(a) and click Download (b).
1
2
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
7/40
ofcdesk idc | TigreCAD for AutoCAD
Read the License Agreement
and select I accept the agreement.
Click on the Next button.
4
Select where you want to install
the program, and click on Next.
5
A screen is displayed including the
note that TigreCAD for AutoCAD
license is free and the application is
part ofofcdesk idc solution. Click
on the Next button.
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
8/40
ofcdesk idc | TigreCAD for AutoCAD
Select the AutoCAD version you desire
to install ofcdesk idc plug-in and click
on Next.
6
Click onthe Install button.
Click on Finish to complete the installation.
7
8
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
9/40
ofcdesk idc | TigreCAD for AutoCAD
Content Creator Extension Plug-inTigreCAD features within ofcdesk idc
TigreCAD is an application for AutoCAD developed by ofcdesk, integrated
with ofcdesk idc, CAD-based solution for Interior Design that assists on item
management, boosting results and, providing a smooth project transition between
platforms.
Important: ofcdesk idc will be installed with TigreCAD and once after the 30-
day trial period has expired, ofcdesk idc will run with limited features. But it does
not affect the TigreCAD features within ofcdesk idc.
Select Run the Product and click Finish to use the TigreCAD free version for
an unlimited time.
Contact us at info@ofcdesk.com or visit www.ofcdesk.com for
information and purchasing ofofcdesk idc and other ofcdesk products.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
10/40
ofcdesk idc | TigreCAD for AutoCAD
After installing TigreCAD and restart your computer, start AutoCAD. You will
nd four tabs including ofcdesk idc and TigreCAD features.
The main ofcdesk tab includes tools to insert, import and export items; apply
nishes; create favorites, congure set of items, and prepare bill of materials.*
The ofcdesk parametrics tab includes tools for creating and editing panels,
raised oor, movable storage, auditoriums and ceilings. *
The ofcdesk extras tab includes tools for conguring sets of items, mirror and
customize items, and comparing bill of materials. *
ofcdesk MEP tab includes TigreCAD features.
The Command Prompt allows you to insert key shortcuts for direct access
TigreCADfeatures.
* For further information about ofcdesk idc tools, see ofcdesk idc User Guide available at: www.ofcdesk.com
See complete list of Commands Appendix A
Accessing ofcdesk idc and TigreCAD features
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
11/40
ofcdesk idc | TigreCAD for AutoCAD
TigreCAD MEP Tool
Setting Product Line
Go to ofcdesk MEP tab and click on the MEP Styles icon to set the
desired Product Line and the piping standard sizes.
Select the pipe nominal diameter (d). The value you choose will be
considered as standard value during the drawing creation. Click on Aplicar
(apply) to leave the screen and save changes.
Set the product line within the screen, selecting
the item from the list.
Navigate within category list to nd the available styles (a) and select a
Product Line. Find the suitable ttings according to the line and pipe diameter
on the Sugeridos (suggested) item, within the Preferncias
(preferences) tab (b). The part number and library version of product line
you select are displayed on Informaes (information) item (c).
Use ofcdesk MEP tools for creating electrical and hydraulic drawings.
1
3
4
2
See manufacturer list.
Select the pipe nominaldiameter.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
12/40
ofcdesk idc | TigreCAD for AutoCAD
Starting Hydraulic Drawings
Setting Units on AutoCAD
First type UNITS into the command prompt and set units according to
architectural project.
Type OPTIONS into command prompt and hit ENTER.
On Options screen, got to User Preferences tab. And on the Source
content units and Target drawing units eld, select the UNSPECIFIED
UNITLESS option.
Type UNITS into the command prompt and
hit ENTER. On Drawing Units screen, go to
Insertion Scale eld, select the unit to be
used on the hydraulic project and click OK.
Usually the unit to be used on the hydraulic
project is the same used on the architectural
project.
Click Apply and OK.
1
2
4
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
13/40
ofcdesk idc | TigreCAD for AutoCAD
Setting Viewports
Use the AutoCADViewports command to make the visualization of your
project development easier.
Type VIEWPORTS into the command prompt, select as many view as you
need and the orientation (horizontal, vertical, above, below, right, or left). It
is recommended two views: vertical.
Click OK.
The screen is displayed as follows:
1
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
14/40
ofcdesk idc | TigreCAD for AutoCAD
Setting Visibility Options
Within the ofcdesk extras tab, click on the Visibility icon, or type
VISIB into the command prompt.
Check boxes and visibility
options applied for all items, and
displayed on the drawing.
Click on OK.
Using Visibility tool, you can show or hide texts, rules and other infos.
1
2
You can set custom visibilities for individual items by running the EEV
command and selecting the desired items. The settings established using EEV
command override settings established using VISIB command.
TI P
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
15/40
ofcdesk idc | TigreCAD for AutoCAD
Starting the project
Inserting Equipment
Type E or Equipamento into command prompt and hit ENTER.
Select an item, double-click and specify the insertion point.
Select one option on command prompt:
Selecione o prximo ponto ou [Distncia/Conexo/Equipamento/
Rotacionar/Selecionar/Finalizar].
To better prepare your project, use line references to represent the piping.
After setting units and viewports, go to ofcdesk MEP tab and click on the Pipe icon.
The following options are displayed on the command prompt:
Selecionar, Conexo, Equipamento e Finalizar (Select, Fitting, Equipment
and Close).
1
2
3
Select the next point or [Distance/Fitting/Equipment/Rotate/Select/Finish].
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
16/40
ofcdesk idc | TigreCAD for AutoCAD
Inserting Piping
To insert pipes, enter the length in millimeters on the command prompt using
the Distncia (distance) option. The direction is guided by the mouse pointer
and it will be available only on the ends of the part. The green color around
the pipe indicates that the direction is right and you can create the piping. The
yellow color around the pipe indicates that there is a pipe already joined to
that tting. If the color is red, the pipe cannot be used because of diameters
incompatibilities.
1
Double-click on the pipe you desired to add.
Select one option on command prompt:
Selecione o produto [Conexo/Equipamento/Finalizar].
Select a product [Fitting/Equipment/Finish]
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
17/40
ofcdesk idc | TigreCAD for AutoCAD
To insert a tting, type C or Conexo into command prompt and the options are
displayed. Double-click to add the desired tting.
User can choose the socket among preset axes. Prompt presents the following
options:
Escolha o ponto de conexo [Prximo/Escolher]
Choose socket [Next/Choose]
Type Prximo (next) to see next socket, or type Escolher (choose) to insert thetting using the current socket. Prompt presents the following options:
[Distncia/Conexo/Equipamento/Rotacionar/Selecionar/Finalizar]
[Distance/Fitting/Equipment/Rotate/Select/Finish]
Type Ror Rotacionar to rotate the tting around the axis where pipe is
connected.
1
2
3
4
Inserting Fitting
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
18/40
ofcdesk idc | TigreCAD for AutoCAD
Enter the angle into the command prompt. Prompt presents the following options
again:
[Distncia/Conexo/Equipamento/Rotacionar/Selecionar/Finalizar]
[Distance/Fitting/Equipment/Rotate/Select/Finish]
Choose Finalizar (nish) option to end the process.
Enter the options on AutoCAD command prompt to continue drawing, inserting
equipment, ttings and new piping.
5
6
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
19/40
ofcdesk idc | TigreCAD for AutoCAD
Inserting Fittings
To insert ttings, go to ofcdesk MEP tab and click on Pipe Fitting icon.
Choose a tting diameter among the measurements shown on
command prompt.
The MEP Products screen is displayed including the available ttings
according to the line and diameter chosen by user.
Double-click on a part to be added and set the insertion point into the
command prompt or click anywhere on workspace.
1
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
20/40
ofcdesk idc | TigreCAD for AutoCAD
Inserting Equipment
To insert equipment, go to ofcdesk MEP tab and click on the Equipment
icon.
Choose an equipment diameter among the measurements shown on
command prompt and hit ENTER.
The MEP Products screen is displayed including the available equipment
according to the line and diameter chosen by user.
Double-click on an item. To insert equipment, set the insertion point
into the command prompt or click anywhere on workspace.
1
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
21/40
ofcdesk idc | TigreCAD for AutoCAD
Reversing Flow
Enable CAD - Entity Rulers option to be possible to reverse the ow.
Go to ofcdesk Extras tab and click on the Visibility icon.
Check CAD - Entity Rulers box.
Go to ofcdesk MEP tab and click on the Rev. Flow icon.
Select piping and press ENTERto reverse the ow.
1
2
3
4
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
22/40
ofcdesk idc | TigreCAD for AutoCAD
Creating Plumb Lines
Enable MEP - Plumb Lines option to be
possible to view plumb lines.
Go to ofcdesk Extras tab and click
on the Visibility icon.
Check MEP - Plumb Lines box.
Go to ofcdesk MEP tab and click on the Plumb Line icon.
Select one option: Prumada (add one or more
plumb line), Zerar (zero the plumb line counter
used to create the standard name that can be
changed) or Finalizar (to close the command).
If you choose Prumada, select piping and press ENTER.
Choose the type of Plumb Line: Passa, Sobe ou Desce (Pass, Up, Down).
The plum line is added automatically with a standard name that can be
edited.
If you choose Zerar, a screen is displayed asking to conrm if you want tozero the counter. Click Yes, No or Cancel.
1
2
3
4
5
6
7
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
23/40
ofcdesk idc | TigreCAD for AutoCAD
Editing Plumb Lines
Enable MEP - Plumb Lines option to be possible to view plumb lines.
Go to ofcdesk Extras tab and click on the Visibility icon.
Check MEP - Plumb Lines box.
Go to ofcdesk MEP tab and click on the Plumb Line icon.
Select one option: Prumada and select Piping set as Plumb Line before
and press ENTER.
Select Editar (edit).
Assign the Plumb Line a name and press ENTER, then type the
diameter and press ENTER.
The texts present within Plumb Line representation are updated.
1
2
3
4
5
6
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
24/40
ofcdesk idc | TigreCAD for AutoCAD
Adding Elevation
Editing Elevation
Enable MEP - Elevation option to be
possible to view elevation.
Enable MEP - Elevation option to be possible to view elevation.
Go to ofcdesk Extras tab and click
on the Visibility icon.
Go to ofcdesk Extras tab and click on the Visibility icon.
Check MEP - Elevation.
Go to ofcdesk MEP tab and click on the Elevation icon.
Select tting or equipment including elevation already set, and press ENTER.
Choose one option: Editar, Normal e Finalizar (Edit, Normal and Finish).
Editar option is to change elevation value. Normal option remove elevation.
Finalizar option is to nish the process.
Choose Editar, type the new elevation value and press ENTER. Type an
abbreviation text and press ENTER.
The texts of the elevation will be updated.
Check MEP - Elevation.
Go to ofcdesk MEP tab and click on the Elevation icon.
Select tting or equipment, and press ENTER.
Type elevation value, press ENTERand elevation is displayed.
1
1
2
3
4
5
6
2
3
4
5
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
25/40
ofcdesk idc | TigreCAD for AutoCAD
Go to ofcdesk tab and click on the Insert icon.
Click Download Libraries
(a). Click on the author icon,
or enter the library, item ormanufacturer name into the
Online Search eld (b), and
hit ENTER.
If you already have the libraryinstalled on your computer,
an Update text message
appears under the image that
represents the library (b).
To reinstall a library, click on
the letter i placed on the
right top of the library (c).
Click on the + sign and
Reinstall.
Important: The available libraries are loaded automatically when installing TigreCAD. You
can always check for updates on ofcdesk tab, on Update (See Libraries Update section of
this Guide).
You must install product libraries to start drawing with TigreCAD. ofcdesk idc allows
you to easily download libraries.
1
2
3
Downloading and Installing Libraries
Click on the library for
automatic installation (a).
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
26/40
ofcdesk idc | TigreCAD for AutoCAD
Inserting Items
Go to ofcdesk tab and click on the Insert icon.
This is a ofcdesk idc tool for describing parts.
Click on Local Libraries (a) and navigate on the list of item categories (b).
The list may expand to multiple subcategories, according to the library size.
Click on the item and click Insert, or double-click on the item to place it on
the drawing. Choose the insertion point and rotation angle.
After you insert an item, the screen reopens allowing you to insert more
items. Hit ESC to stop the insertion process.
Click on the star (c) and the item is added automatically to your Favorites
list.
1
2
3
4
5
See DWG les
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
27/40
ofcdesk idc | TigreCAD for AutoCAD
Using Favorites tool
Click on the Favorites icon to access the list.
Choose the Favorites category (a) to insert an item from the list on the drawing.
Double-click on the item (b).
Set the insertion point and the angle, and click on the drawing.
1
2
3
4
This is a ofcdesk idc tool for describing parts.
ofcdesk idc Favorites tool lets you to keep your preferred items within
easy reach.
Create folders at your convenience to help your organization of Favorite items.
Click on the plus + sign, double-click on the folder and assign a name (a). Drag
the item from Favorites and drop into the new folder. To delete a folder, select the
folder and click on the - sign.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
28/40
ofcdesk idc | TigreCAD for AutoCAD
Adding an item from the Favorites list
Go to ofcdesk tab, click on the Insert icon and click on the star to include the
item automatically on your Favorites list.
Changing Dimension (2D/3D)
Change the drawing dimension by clicking on the 2D3D icon on the
ofcdesk parametrics tab.
Select an item and choose the visualization:
Hit ENTERto convert to the selected items into the dimension you havechosen.
1
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
29/40
ofcdesk idc | TigreCAD for AutoCAD
Project Transition between AutoCAD, Revit and SketchUp
Platforms
Exporting IDS File
You can salve and export your drawing with .ids extension working
within AutoCAD. Click on the Export IDS icon place on ofcdesk tab
and choose the folder where you want to save the drawing.
Click on Advanced Options.
Click on the Proceed button.
Then, using Revit or SketchUp, click on the Import IDS icon within
ofcdesk idc to import the IDS le.
The selected unit information is storage with IDS le.
It is important that you consider original DWG block scales and units
avoiding incoherence of exportation units.
If you do not have the library including the items of .ids le installed in your
computer, the library will be automatically installed when the importation
process begin.
ofcdesk idc provides you with IDS le exportation and importation tool. IDS is
a le extension supported by ofcdesk cad and ofcdesk idc for AutoCAD, Revit e
SketchUp.
Important: this is a ofcdesk idc tool and the use is limited after the 30-day trial period.
Set units according to the
current project.
1
2
3
4
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
30/40
ofcdesk idc | TigreCAD for AutoCAD
Importing IDS les
You can also do the reverse process. Prepare your drawing using Revit
or SketchupTM, click on the Export IDS icon on the ofcdesk idc toolbar
and save the le with .ids extension to export the le.
Important: this is a ofcdesk idc tool and the use is limited after the 30-day
trial period.
Important: You must have ofcdesk idc PRO version installed on every
platform (AutoCAD, Revit and SketchUp) to be possible the IDS le
transition. Only items included on libraries will be imported or exported.
Within the AutoCAD, go to ofcdesk tab and clique on the Import IDS
icon to import the .ids le.
Select the IDS le and click on Open.
Click on the Proceed button.
1
2
3
4
See project units.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
31/40
ofcdesk idc | TigreCAD for AutoCAD
Creating Bill of Materials
Go to ofcdesk tab and click on the BOM icon.
Check a complete Bill of Materials (a) or click on + sign to set lters (b).
Select a category (a), assign a name (b), set ON/OFF auto-update (c),
and click NEXT.
You can create a list including all components, sub-components, parts and the
quantities of each item used into your drawing.
1
2
3
Important: this is a ofcdesk idc tool and the use is limited after the 30-day trial period.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
32/40
ofcdesk idc | TigreCAD for AutoCAD
Select elds to be displayed within the schedule, and click Next.
Order the column according to your needs. Select Ascending to place
the eld above, or Descending to place the eld under (a). Groupitems by rule, part number, nish, etc (b). Click Finish.
Click on the schedule (a) and Position to place the selected schedule
on the drawing.
4
5
6
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
33/40
ofcdesk idc | TigreCAD for AutoCAD
Comparing Bills of Materials
Go to ofcdesk extras tab and
click on the BOM Comparison
icon.
Select one comparison option (a): List 1 minus List 2; List 2 minus List
1; Found on both lists; Comparison Table (Simple) or; Comparison Table
(Detailed).
Check the comparison results (b).
Select two drawings from your
database.
You can compare two drawing and their Bill of Materials easily. It is an excellent
feature in cases of rearrangements.
The BOM comparison can be exported to a spreadsheet, just clicking on Export.
1
3
4
2
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
34/40
ofcdesk idc | TigreCAD for AutoCAD
Setting Preferences
Go to ofcdesk tab and click Preferences.
A new screen is displayed including Locations, Proxy, General, Shared Folders and
Finishes/Options tabs.
Use the Locations tab to check where the libraries will
be placed.
The location is important because they will be employed
by ofcdesk idc when searching item blocks you have
created on the libraries and that will be brought into
your project.
Use the Proxy tab to set your proxy server
congurations.
Use the General tab to log in to your ofcdesk.NET
account and to clean up thumbnail cache.
Warning! Modifying specic settings in the Preferences is only
recommended to advanced users.
1
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
35/40
ofcdesk idc | TigreCAD for AutoCAD
Use the Shared Folders tab to check the location
where Shared Folders are placed and to make them
visible or not.
Use the Finishes/Options tab to control which nishes
dialog will be displayed, and control automatic render
interval.
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
36/40
ofcdesk idc | TigreCAD for AutoCAD
Updating Libraries
Click Yes to start library update process.
Important! You must be connected to the Internet to update the libraries. To
access your account, click Login and enter your e-mail and password.
On the new screen, click on a library to update or click on Update all
libraries.
A message is displayed including available updates once a day when you start
the program. But you can check for updates clicking on Update on the ofcdesk
tab.
1
2
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
37/40
ofcdesk idc | TigreCAD for AutoCAD
Updating ofcdesk idc and TigreCAD
A message is displayed including available software updates once a day when
you start the program. But you can check for updates clicking on Update on the
ofcdesk tab.
Click Yes to start software update process.
The installation wizard is displayed including software version information.
Click Install and follow the onscreen instructions.
After nishing the update, restart your computer and CAD program to end
the process.
1
2
3
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
38/40
ofcdesk idc | TigreCAD for AutoCAD
About ofcdesk idc and Technical Support
Check ofcdesk idc info such as version and Serial Number.
If you are experiencing any issues, click on Send Log.
You will receive an e-mail including the support team solution.
Go to ofcdesk tab and click on About.1
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
39/40
ofcdesk idc | TigreCAD for AutoCAD
Appendix A
Command Prompt Shortcuts
2D3D Command to alter between 2D and 3D
Command to access list of Favorites
Command to insert items
Command to add equipment
Command to check for updates
Command to create a Bill of Materials
Command to export IDS les
Command to open library search
Command to add tting
Command to revert ow
Command to set congurations and preferences
Command to compare Bills of Materials
Command to import IDS les
Command to show ofcdesk idc toolbars
Command to manage pipe style
Command to display item info and rules
Command to search items
Command to display selected item info and rules
Command to check ofcdesk idc information
Command to add pipe
Command for validation
OFCMENU
BOM
OFCPIPE
BOMC
OFCPIPEEQUI
DB
EEV
OFCPIPEFIT
OFCPIPERFLOW
FAV
OFCSPIPE
IDSEXPORT
OFCSTANDARD
IDSIMPORT
OFCUPD
INFO
PREF
INS
VISIB
OFCD
-
7/29/2019 IdcTigreCAD ACAD UserGuide 0812
40/40
ofcdesk idc | TigreCAD for AutoCAD
Contact Us
We are interested in your comments and suggestions about ofcdesk
products. Please let us know how to improve features to better serve
you: feedback@ofcdesk.com.
For further information about TigreCAD, ofcdesk idc and other ofcdesk
products email us at:info@ofcdesk.com.
Technical support is available through our website, as well as learning
interesting tips & tricks about TigreCAD, ofcdesk idc and other ofcdesk
products. Visit our website www.ofcdesk.com.
ofcdesk idc and other solutions mentioned herein are properties ofofcdesk, llc, in the USA and othercountries.TigreCAD is Tigre S/A Tubos e Conexes trademark, in Brazil and other countries.SketchUp is Trimble Navigation Limited trademark, in the USA and other countries.ofcdesk idc not afliated with, endorsed by, sponsored by, or supported by Trimble Navigation Limited and/orits afliates or subsidiaries.
mailto:feedback@ofcdesk.commailto:info@ofcdesk.commailto:info@ofcdesk.commailto:feedback@ofcdesk.com
top related