i:j to din 4094 - · pdf filemeter, soil investigation according to din 4094 with drop weights...
Post on 25-Mar-2018
266 Views
Preview:
TRANSCRIPT
The drilling- and sounding rig RSB 0/ 1.4 is suitablefür soil investigation according toDIN 4021 table 3, sub 1 and 2 as listed below:
I:]
I:J
Soil sampling for soil mechanics,investigating construction sites by meansof percussion coring tubes respectivelyby rotary-coring.
Geological and hydrological investigations,e.g. on dumps or for investigatingformer plants etc.
0 Dynamic penetrometer accordingto DIN 4094
Auger drillingThe power head, mounted to the mast with its hydraulic drill feed, is
applied für drilling through overburden or constructing monitoring wells bymeans of continuous flight auger 0.0. 83 up to 185 mm, respectively byhollow stern auger HBS 79/185 or HBS 111/205.
Percussion coring tube -RKS-
For sampling purposes, the mast-mounted hydraulic hammer en-ables ramming of the weIl known percussion coring tubes (see leafletRKS), whereas the hydraulic puIl-up system offers 1,400 daN pullingcapacity. To overcome the usually high friction when pulling is just star-ted, a hollow jack is available offering 14,000 daN puIl-up.
The all-hydraulicallydriven rig features:
0 multi-pu rposeapplications
0 quick and versatilehandling
Dynamic penetrometer -DPL/DPM/DPH-By means of the hydraulically driven automatic dynamic penetro-
meter, soil investigation according to DIN 4094 with drop weights of10, 30 or 50 kg and a drop height of 50 cm can be perfonned.A penetrometer is also available für Standard Penetration Tests (SPT)with 63.5 kg drop weight and 76.2 cm height of fall.
0 high performance~
""Rotary coring
Coring in hard rock by means of single- or double tube core barrel(O.D. 66 or 86 mm) is düne by means of aseparate available pumpingstation. When the hydraulic hammer is swivelled aside the hydraulic powerhead SBK 20 is mounted to the carriage by locking levers.
0 sturdy design
0 biologicallydegradable oil torthe hydraulics Bailing and hammering
For percussion drilling with bailer or for driving the RKR sampierwith a drop weight, optionally a cable tool percussion mechanism isavailable.
Cased drilling
A hydraulic casing push/pull-device is available für lowering andhoisting casing O.D. 133 up to 219 mm. The device supplies a pull upof 3,300 daN and in special version 10,000 daN.
Straight flush rotary drillingA water swivel and an on-board or separate mud pump enable
straight flush drilling to some 50 m depth.
- 1
Asa 0/1.4-standard execution- mounted on crawler-,
optional
ASB 0/1.4 - varia- adjustable crawler-.
rig width: 760 -1,020 rnrn
Hydr. power head BK 150with hollow stern augerHBS - 79/185-optional:HBS 111/205 and BK 190.
The hydro hammer isswivelled aside.'
CarriersThe crawler with steel-enforced
rubber tracks provides optimum man-oeuvrability in a11 terrain conditions.In supply are fixed as weIl as variacrawlers (width: 760 - 1,020 mm).
The rig is equipped with just those op-tions to meet the requirements of eachindividual client.The trailer is a light weight and chea-per alternative. However not everyavailable option can be mounted onthe trailer, due to the restricted pay-load.
Rig in drivingposition-
SpecificationThe basic execution consists of
the following parts:In this case towing alockable trailer withtools, accessories andfurther equipment.
Frame with 4 hydraulic jacks, diesel-engine with hydraulic station and con-trol panel, mast with hydraulic drillfeed, hydraulic power head and/or hy-draulic hammer, masthead, hydrauliccatching clamp, and the carrier (eithercrawler or trailer).
Preparingrig transport on alowbed trailer-
The necessary loolsare mostly carried onIhe lowing vehicle.
Optionally available are:Hydraulic pulling device, remote con-trol für driving the crawler, hydraulicdriven water swivel and the separateflush pump, the automatic dynamicpenetrometer DPH (must be transpor-ted separately when the rig is trailermounted), coole tool percussion device,push/pull casing device 1).
optional:Rig transportation onthe towing vehicle-
The tools andaccessories in alockable trailer(as shown above).
ASB 0/1.4-"Driving position"
Standard executionmounted on trailer.
-2
Hydr. power swivel SBK 20Power swivel für rotary coring
with single- or double tube core barrelwhilst flushing with clear water. Pro-vided with thread-protector by meansof a mechanicallength compensator.Both hydraulic hammer and power headare swivelled aside.
Hydr. power headBK 150/BK 190/ BK 210Hydr. catching clamp
Power head rotating clockwiseand anti-clockwise, manually hingedaside, tool joint thread-protection bya mechanicallength compensator.Hydraulically catching clamp mountedat the bottom of the mast, swivellingsidewards with interchangeable jaws.
~
The hydro hammer is swivelled aside.Optional to the hydro catching clampa push/pull casing device is available.
Pumping stationSeparate pumping station with
high-press ure piston pump for flushingduring core drilling in hard rock.
hydro powerhead -
hydraulic hammer
HB - tool joint
Hydr. pulling deviceShould the rigs' nonna! pull up
not suffice für pulling the hammer rodsor sounding rods, the additional hollowjack, combined with ball- or jaw clamp,is available.Hydraulic hammer
Hydraulic hammer with adap-ter and hammer head on top of therods. The catching-fork on the hammerhead prevents loosening of threads du-ring hammering and is also used as apulling lock whilst retracting the rods.
hammerhead
catching-fork
jaw-fork
jaw-clamp
The jaw-clamp is fully opened duringhammering by means of the jaw-fork.Swivelled aside to the left the powerhead is shown equipped with an adap-ter für HBS-hollow augers.
-3-
Dynamic penetrometerDPL / DPM / DPH (SPT)
Provided the necessary hydraulicsare illstalled on the standard version ofthe rig -"RSB 0/1.4"-, the dynarnic pe-netrometer device is (as a unit) simplymounted to the mast by means of thewinch.Power head and hydraulic hammer areswivelled aside beforehand. The pul-ling of the sounding rods is performedby the pull up of the rig or aided bythe hollow stern jack and ball clamp.
<JJ
Percussion device
For percussion bailing or for dri-ving drop weights for sampling, opti-onally a cable tool percussion devicemounted on top of the mast is available.
It>Push/Puli casing device
For lowering and hoistingcasing, the push/pull device is avail-ahle mounted at the lower end of themast. When the rig is anchored to theground, a pull down force up to1,500 daN is available.
Drilling tools and accessoriesA typical combination of standardtools is shown (right to left) :
- Percussion coring tube (RKS
open version)- Hammer rods
O.D./I.D. 35.5 / 19 rnmwith threaded nippel M 22
- Continuous flight augerO.D. 83 rnm
with 29 rnm (11/8') hex. connection- Jaw clamp I.D. 36 rnm- Hollow stern auger HBS 79/ 185
-4
1 - Inclined drilling with hollow stern auger.
2 - Rotary coring along the railway.
3 - Rig with remote control.Transport in special truck includingthe compl. drilling tools.
4 - ASB 0/1.4 ..."on site
5 - Monitoring wells along a motorway.
Worklng wllhNordmepr
Drilling EqulDmenl.
... .1 an conllncld IhalJob sills an localld
anY.hln.-... our design Is basld
on Ihls conllcllon.-
t..I,..
- 5-
The "small rig"with a huge potential.
HYDRAULIC PUlliNG DEVICEHollow jack Z 6958. 1passage 1.0. : 105 mmstroke : 150 mmpul! out : 14,000 daN
(at 210 bar)
CARRIERcrawler, with rubber tracks -steel enforced
grass weight approx. 1,600 kgtrailer -grass weight max. 1,300 kg
jaw clampsclamp 1.0.orball clampsclamp 1.0.
DRIVEdiesel engine, 2 cylinder,
A)10.5 kW (14.3 HP),B)23.2 kW (31.6 HP).
HYDRAULlCSYSTEMthree high-pressure gear pumps70 I. biological degradable oil
32 - 80 mm
Assembly
of
various parts
and units
according
to customer's
requirements.
22 - 36 mm
MAST - "ASe 0/1.4"-built-in hydraulic drill feedtravel : 2,200 mmpul! up max. 1,400daNpul! down max. : 700 daNspeed up : 0 - 0.5 m/sspeed down : 0 - 0.4 m/s
DYNAMIC PENETROMETERDPUDPM/DPH (SPT)DIN4094 :drop weight : 10/30/50 kg (63.5)drop height : 50 cm (76.2)frequency : 15 - 30/ mintotal weight : 140 kg (160 kg)
PERCUSSION MECHANISMmax.pull 200 daNfrequency max. 45/ minstroke length : 300 mm
PUSH/PULL CASING DEVICESmax. casing 0.0.: 205 ~mmax.passage : 220 mmmax. pull down(anchored) 1,500 daNmax. pull up : 3,300/ 10,000 daN
WINCHEStype BW 300 K / BW 1100 Kpul!on first layer ': 320/1,000 daN
cable speed
capacitycable 0.0.
HYDRAULICHAMMERSKRUPP, type HM 12 C / HM 60singlestrake energy : 8/20 daNmfrequency : 1,350/ mincannectian : 0.0. 25 x 75 mm lang
with callar 0.0. 42 mm
HYDRAULlCPOWERHEADStype BK 150/ BK 190/ BK 210torque : 150/190/210 daNmspeed : 0 - 80 rpmconnection : 41 mm Hex
(1 5/8")
HYDRAULIC POWER SWIVELtype SBK 20torque 27 daNmspeed 450 rpmconnection : AW pinmax. waterpressure:water connection :
12 bar clear waterR Y2"
SEPARATE PUMPING STATIONhigh pressure piston pump 10 10capacity : max. 44 I/minpressure 12 bardrive : petrol engine
1.47 kW (2.0 HP)Lx W x H, approx. : 0.90 x 0.45 x 0.60 mweight 65 kg
HYDRAULIC CATCHING CLAMPclamping O.D. : 205 mmpassage: 220 mm max.
-6
0.4 m/s30/50 m
6/8 mm
top related