incline lever row
Post on 04-Apr-2018
232 Views
Preview:
TRANSCRIPT
-
7/29/2019 Incline Lever Row
1/38
Project: Incline Lever Row Page 1 of 38
Incline Lever Row
NOTE: The measurements within this text and 2D documentation are given both in millimeters
and inches (in brackets). This website is based on ISO measurement unit system, which is theinternational standard. I apologize to the people who use other measurement units; but I believe that
measurements given in millimeters and inches should be adequate for everyone who would like tobuild this project.
Besides that, on todays Internet it is easy to purchase the ruler containing all the measurementunits and overcome the difficulties of any kind.
Use various tools and clamps in process of welding, so you could weld the items together with
accuracy.
Make the components as given on drawings.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
2/38
Project: I
Parts List
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
3/38
Project: I
Assembly drawing
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
4/38
Project: I
Frame Components
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
5/38
Project: I
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
6/38
Project: I
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
7/38
Project: I
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
8/38
Project: I
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
9/38
Project: I
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
10/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
11/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
12/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
13/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
14/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
15/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
16/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
17/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
18/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
19/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
20/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
21/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
22/38
Project: In
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
23/38
Project: In
Standard Parts
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
24/38
Project: Incline Lever Row Page 24 of 38
Assemblage Instruction
1. Weld the Cover 50x50 (items 13) to the Square Tubing 50x50x4 Cut Lenght 500,00mm (item 1).
Make the two of these subassemblies
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
25/38
Project: Incline Lever Row Page 25 of 38
2. Weld the Square Tubing 50x50x4 Cut Lenght 1350,00mm (item 2) between these two subassemblies
made in the previous step.
3. Weld the Square Tubing 50x50x4 Cut Lenght 250,00mm (item 3) between two Square Tubing 50x50x4
Cut Lenght 1350,00mm (items 2) on a subassembly made in the previous step.
4. Weld the Square Tubing 40x40x2,9 Cut Lenght 431,6mm (item 5) on top of the Square Tubing 50x50x4
Cut Lenght 250,00mm (item 3) on a subassembly made in the previous step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
26/38
Project: Incline Lever Row Page 26 of 38
5. Weld the Square Tubing 40x40x2,9 Cut Lenght 188,5 mm (items 12) to the subasembly made in the
previous step.
6. Weld the Plate 1 (items 15) and Triangle Holder (items 32) to the subassembly from the previous picture.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
27/38
Project: Incline Lever Row Page 27 of 38
7. Weld the Square Tubing 40x40x2,9 Cut Lenght 125,00 mm (items 6) to the assembly made in the
previous step.
8. Weld the Leg Support (item 14) to the assembly made in the previous step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
28/38
Project: Incline Lever Row Page 28 of 38
9. Weld the Square Tubing 40x40x2,9 Cut Lenght 1400,00 mm (item 4) to the assembly made in the
previous step.
10. Weld the Cover 40x40 (item 20) to the other, free end of the Square Tubing 40x40x2,9 Cut Lenght1400,00 mm (item 4).
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
29/38
Project: Incline Lever Row Page 29 of 38
11. Weld the Sheet Support (item 27) and Triangle Support (item 28) together.
Make the four of these subassemblies
12. Weld the subassemblies from the previous step to the subassembly made in step 10.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
30/38
Project: Incline Lever Row Page 30 of 38
13. Fasten the Wooden Plate (item 33) to the subassembly made in the previous step using standard parts:
Slotted Pan Head Screw M6x30mm (item 29), Spring Lock Washer 6 (item 30) and Hexagon Nut M6(item 31).
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
31/38
Project: Incline Lever Row Page 31 of 38
14. Weld the Square Tubing 40x40x2,9 Cut Lenght 250,00 mm (item 8) and Support (item 19) to the
assembly made in the previous step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
32/38
Project: Incline Lever Row Page 32 of 38
15. Weld the Pipe D25,4x3,2mm Cut Lenght 200,00mm (item 9) to the Main Bar 40x40mm (item 18).
Chamfer the edge at the end of Pipe D25,4x3,2mm Cut Lenght 200,00mm (item 9).
16. Weld the Pipe D25,4x3,2mm Cut Lenght 600,00mm (item 10) to the assembly made in the previous
step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
33/38
Project: Incline Lever Row Page 33 of 38
17. Weld the Pipe D25,4x3,2mm Cut Lenght 150,00mm (item 11) to the assembly made in the previous
step. But first chamfer the edges at the ends of Round Tubing D25,4x3,2mm Cut Lenght 150,00 (item 11).
18. Weld the Cover D25,4mm (item 21) to the assembly from the previous picture.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
34/38
Project: Incline Lever Row Page 34 of 38
19. Weld the Round Tubing D31,8x3,2mm Cut Lenght 360,00mm (item 7) and Cover D31,8mm (item 23)together.
20. Weld the Limiter (item 34) and Inside Limiter (item 22) to the assembly made in the previous step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
35/38
Project: Incline Lever Row Page 35 of 38
21. Weld the subassembly made in the previous step to the subassembly made in step 18.
22. Weld the Shell (item 24) to the assembly made in the previous step.
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
36/38
Project: Incline Lever Row Page 36 of 38
23. Weld the Square tubing 40x40x2,9 (item 16) and Plate 2 (item 17) together.
24. Weld the Shell (item 24) to the assembly made in the previous step.
25. Fix the assembly made in the previous step to the subassembly made in step 22 using Pin 16h11 x 65(item 25) and Split Pin 3,2x28mm (item 26).
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
37/38
Project: Incline Lever Row Page 37 of 38
26. Fix the assembly from the previous step to the subassembly made in step 14 using Pin 16h11 x 65 (item
25) and Split Pin 3,2x28mm (item 26).
http://localhost/var/www/apps/conversion/tmp/scratch_2/WWW.CRAFTSMANSPACE.COM -
7/29/2019 Incline Lever Row
38/38
Project: Incline Lever Row Page 38 of 38
top related