innovations in professional practice within forestry...
Post on 21-Jul-2020
2 Views
Preview:
TRANSCRIPT
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Innovations in Professional Practice
within Forestry & Arboriculture
INTERNATIONAL CONFERENCE
Mendel University in Brno, Czech Republic, 6–7th Sep 2016
Conference Information & Programme
Mendel University Brno Zemědělská 1 Brno 613 00 Czech Republic
coordinates N: 49.2102094 E: 16.6158769
About Brno
Brno is the second largest city in the Czech Republic with a population of 380 000. Within two hundred kilometres there are important European capitals: Prague, Vienna, and Bratislava. More than 90 000 students make Brno a dynamic city and the cultural hub of Moravia. Brno is home to a number of significant institutions and historical sites, e.g. the Moravian Gallery, the Moravian Museum, the Brno National Theatre, Spilberk Castle, the Cathedral of St. Peter and St. Paul and Villa Tugendhat. It is hard to run out of things to do in Brno, but the city is not overwhelmed by tourists, so you can avoid large crowds and enjoy reasonable prices.
Currency
Please be aware that the currency in the Czech Republic is the Czech Crown. The exchange rate is approx. 1 EUR = 27 CZK.
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Traveling to Brno, Czech Republic By Air:
Around Brno there are 4 international airports – Prague (PRG), Wien (VIE), Bratislava (BTS) and Brno (BRQ).
At Bratislava airport you can go by bus 69 to the Main Railway Station (Hlavná stanica) every 20 minutes for 0.90 €. Duration is approximately 25 min. Trains from Bratislava hlavná stanica to Brno Hlavní nádraží go every two hours and cost around 200 CZK (7.50 €). The journey takes 1h 30mins.
From Wien (Vienna) airport you can take the buses of Tourbus (12.4 €; 1 bus per day) or Student Agency (17 €; 8 buses per day) to get directly to Brno. The journey takes 2h 30mins. For these direct buses it is recommended to have a reservation or buy a ticket online - http://www.studentagency.eu or http://www.tourbus.cz/port/tickets. From the Airport you can also take the bus to Wien centre (Wien Meidling; 8 €, duration approx. 30 mins) and go to Brno by train (every two hours; 10 €, duration 2h)
From Prague (Praha) airport you can also use the direct bus connection by Student Agency (duration 2h 30 minut, 10 €). Buy your ticket online at http://www.studentagency.eu. Another possibility is to take the airport express (60 CZK = 2.5 €, duration 0.5h) bus to Prague Main Railway Station. Trains to Brno go every hour. The journey takes 2h 40mins and costs around 8 €).
Brno airport has direct a connection with the city centre by bus 76 (duration 20 min, 25 CZK = 1 €)
By Car:
Brno lies in the heart of Europe on the crossroads of the main highways from Vienna, Prague, Bratislava and Wroclaw. Czech highways can be used only with a valid highway sticker. The cheapest sticker costs 310 CZK (approx.12 €) and is valid for 10 days. Parking on selected parking plots around the University is usually free of charge. Hotels normally have private parking places.
By Train:
Brno has good connections by international trains. Brno lies on the connecting line between main German cities (Hamburg, Berlin, Dresden) and Austria – Vienna, Slovakia – Bratislava and Hungary – Budapest. All trains arrive to Brno Hlavní nádraží. In front of the train station you’ll find the main junction point for public transport in Brno.
By Bus:
Brno has two main bus stations – Grand Hotel (for buses of Student Agency, next to the train station) and Zvonařka (for all other companies). Form Zvonařka you have to walk a little (green line on the map) to get to closest tram station towards Hlavní nádraží. Take tram number 12 in the direction Technologický park.
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
City centre with bus and train stations (violet), important tram stops with number of tram, Hotels (blue dot and name) and the Campus of Mendel University.
Traveling in Brno and to the conference venue
Brno has a public transportation system consisting of trains, trams and buses. Trams are marked by number 1–14, buses have numbers between 15 and 88 and night buses numbers 89 – 99. Tickets can be purchased at the yellow ticket machines located at important stops. You can also buy tickets at the tobacconist’s, from bus and tram drivers (for a higher price), at train stations and in post offices. Once on the bus or tram, don’t forget to immediately validate your ticket. Ticket inspectors can check tickets at any time and fine those traveling without a valid ticket 40 EUR.
Prices of tickets:
In automatic machines (see picture on the right): 15 min – 20 CZK 60 min – 25 CZK One day – 90 CZK SMS ticket: (works only with a Czech SIM card by sending the following text to 90206) BRNO20 (20min - 20 CZK) BRNO (75 min – 29 CZK) BRNOD (One day – 99 CZK) If you want to buy a ticket from the driver, the price is 35 CZK for 90 min. The city centre has two main junction points – Česká and Hlavní nádraží (in front of the railway station). All trams pass one of these points. Tram number 9 serves both and goes to Zemědělská, where the conference venue can be found (approx. 20 mins from the railway station). During daytime this tram goes every 10 minutes. Night buses run every hour (23:00 – 05:00). All night buses leave from Hlavní nádraží. If you experience any problems with transportation, please contact us: David Sis xsis@mendelu.cz +420 739 341 964
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Conference Information Registration and welcome drink
Registration and main conference room is in the building of Mendel University – building Q on the map. You can follow the arrows from Zemědělská tram stop (in lower right corner of campus map) to the registration desk to the building Q. The welcome coffee will be held in the same room as the registration desk.
Confirmation letter Participants who need a letter confirming their participation can ask for it by e-mail or in person at the registration desk.
Presentations The main program starts in the “Conference Hall Q1” in building Q. Routes will be marked by “INPROFA conference”. The presentations will be limited to 40 minutes each with 5 additional minutes for discussion.
Poster presentation Posters at the conference should be in A0 portrait format (841 x 1189 mm). Poster authors should hang their posters on the allocated board at the beginning of the conference. A separate poster session will be organized.
Meals and breaks Lunch during the conference will be served in the “Menza” (Building X and O on the map). Just get your plate and enjoy – the meals are included in the full registration fee. Coffee breaks will take place in the same room as registration desk.
Social evenings The social evenings will be confirmed during the event.
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Brno sightseeing tour Tuesday 6th September at 18:30 you can participate in a guided tour around the historical centre of Brno. The meeting point will be in the city centre next to tram stop “Česká” (in front of St. Tomas’ church) of at 18:30 or in front of building Q at 18.00. The meeting point will be at the model of historical Brno town (foreground on picture). The meeting point is marked on the map as a black dot. During the tour we will visit important places and buildings in the city centre. The tour will last for ca. 1.5 hours.
Field Excursions/Workshops (see Programme)
Located at the Training Forest Enterprise of Mendel University
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Programme
Day 1 – Tuesday 6th September 2016
08.15–09.00: REGISTRATION & COFFEE
09.00–09.30: Introductions: Assoc. Prof. Eng. Radomír Klvač, Ph.D., Dean of the Faculty of Forestry and
Wood Technology, Mendel University in Brno & William Robb BSc(Hons)For MICFor, President – ABA
International
09.30–10.10: Dr Daniele Zanzi (Italy)
What’s new in modern arboriculture?
A deep knowledge of biology is necessary to properly
take care of our trees. A comprehensive knowledge of
the anatomy of trees and their physiology is key to
understanding how different situations occurring in
our cities and affect trees. Alex Shigo is the father of
modern arboriculture. Daniele Zanzi introduced Shigo
in Italy and contributed to the spread of his studies
throughout Europe.
Thanks to Shigo’s research, our comprehension of
the whole tree biology environment
totally changed: the reaction of the tree tissues
against wounds, the energy that a tree could
accumulate and the relationship that can exist between a tree and its associates are the basis of our approach in
arboriculture.
Only with direct experience (Touch Trees!) in the field can we employ a proper approach in the context of modern
arboriculture. New technologies, as bio-control, IT systems and advanced technologies in evaluating tree
stability, could help us in preservation of trees within the urban environment.
10.15–10.55: Oskars Krisans (Latvia)
Monitoring tree reaction to the environment: sap flow & tree vitality
Trees and urban forests in a changing climate can be
susceptible to the effects of environmental stress. This
case study presents an examination on the health of a
summer transplanted oak tree which had been
subjected to root pruning. The effect was measured via
the radial pattern of sap flow on the stem by state-of-
the-art techniques.
Direct measurements of sap flow can provide effective
diagnosis of changes in tree vigour in relation to a wide
range of biotic and abiotic factors. Knowledge gained
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
can provide both foresters & arborists with a better understanding of the potential conditions that can affect
vitality & subsequent growth of tree species within their management.
11.00–11.40: Dr Razvan Campu (Romania) – paper 1
Modern evaluation methods in tree stability assessment
This paper presents a modern methodology for assessing
the risk in park and street alignment trees of the city of
Brasov. The method involves analysing tree trunk
resistance to wind load, using modern techniques (sonic
tomograph and drilling resistance) for the identification of
internal defects and studying the tree trunk and crown
characteristics as well as the distance from objects to be
protected.
11.45–12.40: LUNCH
12.45–13.25: Dr Glynn Percival (Great Britain)
What’s new in tree pest and disease control technology?
Over the past few years pest and disease severity of
trees and shrubs planted within urban landscapes
(gardens, streets, parks, etc) has been increasing on
an annual basis. Uncontrolled many of these
problems can result in high plant mortality rates.
Likewise, with climatic change and increased
international trade the threat of exotic pest and
disease introduction is all too real.
This paper will discuss the practical options available
to professionals involved in the arboricultural,
nursery production, horticultural and landscape
industry to manage and suppress these problems:
Areas covered include:
Plant Defence Activators
Biochar
Chitin based fertilisers
Biological control
Mulches
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
13.30–14.10: Frank Rinn (Germany) – paper 1
Understanding tree biomechanics and wind loads
Tree risk assessment requires a basic understanding of
species-specific wood anatomy and tree-biomechanics.
Risk mitigation and continuous tree-care, in addition, need
arborists understanding wind loads, pruning- and cabling-
effects. These aspects are described in both theoretical
and practical ways.
14.15–14.40: Dr Andrei Apafaian (Romania)
A Review of Automated Techniques in Forest Productivity Studies
In the last decade modern technology has become
widely spread in all activity domains including forestry.
Modern tools and equipment such as G.P.S receivers,
sensors, electronic measurement systems and
dedicated software makes it possible for the delivery
of real time information that enables a better and
more accurate decision making process. Furthermore,
the automated techniques used in different scenarios
have the potential to make the productivity studies
easier than ever. This review is based on literature research that aimed to quantify the type and extent of
applicability of different kinds of equipment used in the forest productivity studies highlighting at the same time
the importance of such equipment, tools and techniques.
14.40–15.10: Dr Juan Carlos Rubio-Romero (Spain)
First results of the analysis of accidents by chainsaw in Andalusia
This paper presents preliminary results of the analysis
of labour accidents with chainsaw as material agent in
Andalusia during the period 2009-2013, in order to
characterise the injured worker, as well as the analysis
of the contents of manuals and guides in Spanish for
safe use of chainsaws.
15:10–15:30 COFFEE BREAK
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
15.35–16.15: Dwayne Neustaeter (Canada)
Accelerated learning techniques for forestry skills instructors
Have you been to a class where you found it hard to stay
awake?
Do you learn better when you are awake and interested?
There are techniques that instructors can apply to improve
how much students retain by making learning easy and
fun. The understanding of content versus context is the
foundation of mastering the art of instruction. This seminar
will introduce you to accelerated learning techniques
utilized by excellent instructors. You will learn how to
manage context and make learning a fun and stimulating
experience. This paper will introduce and demonstrate the
accelerated learning teaching template using the topic of
hung and snagged tree removal. You will gain a broader understanding of how to utilize accelerated learning
techniques and learn some methods of how to cut or fell danger trees.
16.20–17.00: Dr Razvan Campu (Romania) – paper 2
Time consumption and productivity of chainsaw manual harvesting of resinous species in
Romania
Manual harvesting with chainsaw felling and a group
based cable skidder is still the most commonly used
system in Romanian mountainous areas. This paper
presents time consumption and Husqvarna 359
chainsaw productivity in harvesting resinous trees.
This information is necessary for planning certain
activities (establishing the amount of equipment and
the number of work teams) in such a way that they
would not exceed the period of time allowed by the
law and that they would comply with the working conditions from each felling area.
17.05–17.45: Frank Rinn (Germany) – paper 2
Tree stability to tree safety. Technical diagnostics: overview, possibilities
and limitations
Possibilities and limitations of technical inspection methods: resistance drilling, sonic
tomography, pull-tests. Technical diagnostic methods enable trained arborist not only
determining safety of trees more precise but in addition deliver written proof that can be
better explained to clients, administrations, and legal/insurance experts. But, this
requires an understanding of the methods principles and limitations.
18.30–20.00: GUIDED TOUR
20.00: CONFERENCE DINNER
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
Day 2 – Wednesday 7th September 2016
09.00–09.30: Travel to Mendel University Training Forest Enterprise
09.30–15.30: Outdoor Events: STATION A – SKYLINE OPERATIONS Led by Přemysl Veselý/Pavel Mauer – ŠLP Masarykův les Křtiny
STATION B – FOREST HORSE DEMONSTRATIONS Led by Pavel Bezpalec– Blatná Engineering
STATION C – TREE PULLING TESTS, RESISTANCE DRILLING & SONIC TOMOGRAPHY
DEMONSTRATIONS Led by Frank Rinn – Rinntech
INPROFA
©2016 Inprofa.mendelu.cz & ABA International
STATION D – CANADIAN CHAINSAW INSTRUCTIONAL TECHNIQUES Led by Dwayne Neustaeter
STATION E – ABA APPROVED AERIAL RESCUE & SRT ACCESS TECHNIQUES Led by Jindrich Prazak
STATION F – CLIMBING ROPE ‘NDT’ INSPECTION DEVICE Led by Pavel Nevrkla & William Robb
12.00–13.00: LUNCH
20.00: FINAL CONFERENCE DINNER
top related