install or upgrade cisco anyconnect vpn client for windows ... employees...1. launch your web...

Install or Upgrade Cisco AnyConnect VPN client for Windows

This article covers steps for a new installation or to upgrade an existing installation of the Cisco

AnyConnect VPN client on a Windows machine. Note: Installation requires local administrative access

to your device.

1. Launch your web browser, browse to remote.meritushealth.com and enter your Username

and Password

2. You will be presented with the following screen. Click on the Download for Windows link to

download the AnyConnect client. You can also click on the Instructions link to view generic

installation instructions.

3. Click Save and then Run from the downloads bar

4. Follow through with the installer’s instructions.

5. You may see a User Access Control warning, click Yes to continue the install.

6. Click Finish to complete the install.

7. Launch the Cisco AnyConnect Secure Mobility Client from the Start Menu.

8. In the Ready to Connect window, enter remote.meritushealth.com as the server name and click

Connect.

9. Enter your Username and Password and select OK

10. Click Accept on the welcome banner.

11. The AnyConnect icon will be minimized in the system try in the lower right hand corner.

12. To disconnect the Anyconnect client, right click on the icon in the system tray and select

disconnect.