installing an intel cpu and heatsink

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 1/16

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 2/16

A CPU (centralprocessing unit) is thebrain of the computer

It fetches program

instructions from RAM,interprets and processesit and then sends backthe computed results so

that the relevantcomponents can carryout the instructions

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 3/16

To avoid possible damage brought bytemperature, CPUs, and other componentsthat release heat in general, are highlyrequired to have a cooling system.

The CPU is cooled down through either aheatsink and fan assembly (HSF) or throughliquid cooling. In this lesson we will use the

heatsink and fan assembly to cool down ourCPU.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 4/16

Today we will beinstalling anLGA1150 type ofIntel CPU, but this

method can be usedto other types Materials needed:

◦ CPU◦

Motherboard◦ Heatsink and Fan

Assembly◦ Thermal Paste

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 5/16

1. On your motherboard,push the load lever of

the CPU socket downto unclip it and lift tothe fully openposition.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 6/16

2. The load plate willautomatically lift upas the load lever is

pushed to the fullyopen position.NOTE: Do not touchthe socket contacts

or the bottom ofthe CPU. 

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 7/16

3. Align the notcheswith the socketalignment keys.Lower the CPUstraight down,without tilting orsliding the CPU in thesocket. Inspect the

CPU to check if it isproperly seated in thesocket.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 8/16

4. Close and slide the

load plate underthe retention knob.Close and engagethe load lever.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 9/16

5. When you pressdown the load leverthe PnP cap willautomatically popup from the CPUsocket. Do notdiscard the PnPcap. Always replace

the PnP cap if theCPU is removedfrom the socket.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 10/16

There are differentmethods of applying thethermal paste onto theCPU. But all of these

methods are more or lesshave the same effect onthe temperature. Todaywe will be using the mostcommon method, whichis the middle dot method.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 11/16

Place a fair amountof thermal paste tothe center of the

heat spreader of theCPU.

You can tell that youhave applied enoughif the paste on theCPU is rice-sized.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 12/16

1. Place the heatsink onthe motherboard withthe fan’s cable facingtowards the fan

connector and thefasteners matchingthe holes on themotherboard. NOTE:Make sure that thenarrow groove ofeach pin is pointingoutward. 

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 13/16

2. Push down theheatsink until thefour fasteners getwedged into the holes

on the motherboard.Press the fourfasteners down tofasten the heatsink.As each fastenerlocks into position aclick should be heard.

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 14/16

3. Inspect the

motherboard toensure that thefastener-ends havebeen properly

locked in place

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 15/16

4. Attach the CPU fancable to the CPU fanconnector on themotherboard

8/10/2019 Installing an Intel CPU and Heatsink

http://slidepdf.com/reader/full/installing-an-intel-cpu-and-heatsink 16/16

On your workstation, install an Intel LGA1150CPU and its stock heatsink and fan assemblyon a motherboard.

Acquire the materials from your instructor.

The activity should be finished within a

maximum of 10 minutes.