interior renovation boq proposed interior renovation …
Post on 31-Jan-2022
30 Views
Preview:
TRANSCRIPT
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
SCHEDULE - INTERIOR FIXED ASSETS
WORKS
GENERAL NOTES: -
PARTITIONS / PANELLING
General Specification for partition :-
Finishing :-
SKIN: -12mm Exterior Grade Particle Board shall be screwed to frame work on both sides with
joints as shown or directed.
Make: Associate / Action Tesa / Eco boards/ Archid / Willson.
SKIRTING : In the same alignment, 3" high in 12mm thk Particle Board with a groove finished
with laminate / veneer as the case maybe, or as directed by the Architect.
VENEER:- 4mm thk natural venner with matching superior approved grade to be fixed to the
plywood having joints as shown or directed complete with melamine polish finish.
Make: Century / Durian / Archid or equivalent approved make
PROPOSED INTERIOR RENOVATION WORK FOR STATE BANK OF
INDIA, VASHI SECTOR -17 BRANCH AT VASHI NAVI MUMBAI
1. The plywood considered in this estimate shall be of Archid/Duro/Green/Century or equivalant
approved make commerical Plywood/Block board (as per sample approved by the
Architect/SBIIMS) for all the items of Interior & Furniture works.
2. The rate shall be inclusive of anti termite coating on all sides to plywood, teak wood & all the
other wooden components of Asian paints or equivalent approved make.
3. All internal woodwork / Plywood shall be treated with antitermite preservative.
4. All internal framework shall be of Aluminium unless otherwise specified as Teakwood.
5. AII exposed edges of Plywood shall be fixed with C.P. Teak Lipping of size as directed by
Architect.
6. The skinning shall be in 12 mm thk Exterior Grade Particle Board unless otherwise specified.
7. All exposed veneer surfaces shall be finished with melamine polish . The thickness of the
veneer shall be 4.0mm & that of laminate shall be 1.0mm thk. However if the same shall vary,
no extra charges are payable for the additional thickness. The approved veneer shall be
finished with natural melamine polish of minimum 2 coats to have desired matt melamine finish
where ever specified.
8. Rate for full height partitions to include the cost of framework above false ceiling as required
to fix the same to the ceiling slab for which no extra payment shall be made and the rate
quoted shall be inclusive of the same.
9. Measurement of Partition & Panelling shall be limited upto 6" above False ceiling & no
separate payment shall be made for the work above 6".
10. Additional item if executed for AC purpose shall be measured in the relevant item.
11. The rate shall be also inclusive of pattas & bands, grooves at any level, any design in
veneer, textures etc including the necessary framing/ openings for Electrical, Telephone & AC
outlets.
Main frame - Aluminium sections of 16 Gauge mentioned are out of size 2"x2". Aluminium
section verticals at minimum 1' 6" - 2'-0" Centre-Centre spacing approx. and 2" X 1" size
Aluminium sections horizontal at 1' 6"-2-'0" Centre-Centre spacing approx. Extra frame below
slab soffit for conduit to run above. All verticals shall be secured to the ceiling.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/ 12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/ 12RFt.)
Make: Jindal / Hindalco / MAAN
INTERIOR FIXED ASSETS WORKS Page1 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
1 Providing and fixing Full ht. double skin
Partitions as per specifications and finishes
including skirting, complete as per the drawings
and instructions complete in all respects as under:
Main frame - Consisting of 2" x 2" Vertical 16
Gauge Aluminium sections placed at approx. 1'-
6" to 2'-0" Centre to Centre and horizontal
members of sectional size (16G) 2" X 1" placed
at 1'-6" to 2'-0" C/C including necessary extra
framing below slab soffit for conduits to run
above. All verticals to be secured to ceiling/beams
bottom/sides in approved style using anchor
fastners as directed at site.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/
12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/
12RFt.)
Make: Jindal / Hindalco / MAAN
Skin:- Providing and fixing 12mm thk Exterior
Grade Particle Boards on Both sides using MS
screw to frame work with joints as shown or
directed.
Make: Action Tesa / Eco boards/ Archid / Willson
or equivalent as per sample approved.
SKIRTING : In the same alignment, 3" high in
12mm thk Exterior grade approved quality and
make Particle Board with a groove finished with
laminate / veneer as the case maybe, or as
directed by the Architect.
A --do--- as above but providing both sides of the
Partitions finished with 1.00 mm thk approved
quality and shade Laminate in the pattern &
design as shown in the drawing or as directed by
Architect including necessary grooves, skirting etc
complete.
Laminate Make :Royale touche / Century / Green
lam / Merino or equivalent approved.
Adhessive: Fevicol.215 Sft
LAMINATE:- Approved laminate shall be of 1.00mm thick.
Make: Royale touche/Century/Green lam/ Merino or equivalent approved make
INTERIOR FIXED ASSETS WORKS Page2 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
B --do--- as above but providing Partitions with 1.00
mm thick approved quality and shade Laminate
on One side & other side with 6mm thk Calcium
Silicate Board finished with 2 coats of approved
acryllic emulsion paint including POP punning for
surface preparation including necessary grooves,
skirting etc complete as shown or directed by
Architect.
235 Sft
C --do--- as above but providing Partitions finished
with approved quality and shade 1.0mm thk
laminate on one side & other side of the partition
to be finished with approved quality and make
4mm thk veneer finished with 2 or coats of
melamine polish includining applying
primer/preparation of surface as per sample
approved and as directed by Architect, including
necessary grooves, skirting etc complete.
Venner Make: Century / Durian / Archid or
equivalent approved make
185 Sft
D --do--- as above but providing partitions to be
provided with approved make Exterior Grade
Partical board on one side of the main frame
finished with 1.0mm thk approved laminate and
the other side of the main frame to be provided
with 12mm thick Gypsum board finished with 2
coats of approved acryllic emulsion paint as
shown and as directed by the Architect/SBIIMS
including necessary grooves, skirting etc
complete.
60 Sft
E --do--- as above but providing partitions to be
provided with approved make 12mm thick MDF
Board on both sides of the Aluminium framework
including finishing both sides with PU machine
polish as per sample approved including
necessary surface preparations, final finish etc
complete of approved shade, colour & texture as
shown in the drawing and as directed by the
Architect, including necessary grooves, skirting
etc complete. 150 Sft
2 Providing & Fixing in position full height Semi-
Glazed partition with folowing specifications:
INTERIOR FIXED ASSETS WORKS Page3 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Main frame - Consisting of 2" x 2" Vertical 16
Gauge Aluminium sections placed at approx. 1'-
6" to 2'-0" Centre to Centre and horizontal
members of sectional size (16G) 2" X 1" placed
at Floor/skirting level, 3'0" height level, door
height at 7'0" level for remaining spacing@1'-6" to
2'-0" C/C to be maintained including necessary
extra framing below slab soffit for conduits to run
above. All verticals to be secured to ceiling/beams
bottom/sides in approved style using anchor
fastners as directed at site.
2" X 2" 16 Gauge Aluminium sections = (3.200 kg/
12RFt.)
2" X 1" 16 Gauge Aluminium sections = (2.100 kg/
12RFt.)
Make: Jindal / Hindalco / MAAN
Skin:- Both sides of the main frame shall be
finished with 12mm thk approved quality and
make exterior grade Partical board screewed to
the frame with joints as directed upto 3'0" level
and from 7'0" level to the top upto false ceiling
level including providing and fixing 8 mm thk.
clear glass of Saintgobin or equivalant approved
fixed with teak wood moulded beading duly
melamine polished/painted as directed by the
Architects/SBIIMS complete. The rate should
include providing and pasting frosted Polyster film
of Garware or equivalant approved make &
design and as per drawing and as directed by
Architect.
Particle board Make: Eco boards/ Archid /
Willson/Bhutan or equivalant as per sample
approved.
SKIRTING : In the same alignment, 3" high in
12mm thk Particle Board with a groove finished
with laminate / veneer as the case maybe, or as
directed by the Architect.
a --do--- as above but providing Partitions with 1.00
mm thick approved quality and shade Laminate
on One side & other side with 6mm thk Calcium
Silicate Board finished with 2 coats of approved
acryllic emulsion paint including POP punning for
surface preparation including necessary grooves,
skirting etc complete as shown or directed by
Architect.
60 Sft
INTERIOR FIXED ASSETS WORKS Page4 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
3 Providing & Fixing in position about 4'-0" high
Low height Partition made out of 16 Gauge
hollow Aluminium section framing (Minimum
standard weigh as mentioned in this item). All
Vertical members to be of sectional size 2" X 2" 1
erected at 1' 6" to 2' 0" centres and Horizontal
members of size 2" X 1" to be placed at floor level
/ skirting ht. level as well as intermediate member
at 3'-0" level. Rate to include providing additional
members as per site requirement without extra
cost. The scope of work includes:
(i) 12mm. thk approved quality Exterior grade
Partical Board skin on both sides of the frame to
be screwed to the frame with joints as directed
upto 3'-0" height
(ii) Providing 8mm thk clear float glass of 1' 6"
height above 3'-0" level. The glass shall have a
height of 1'-0" on sides and 1'-6" in the centre
fixed with SS Studs / D brackets of approved
quality.
(iii) Including providing Polyster frosted film of
approved make & design on the glass.
(iv) The rate should include providing soft board
panel with felt cloth of approved texture, shade &
design, white board / white laminate in the centre
with a small shelf of 1'-0" projection with bevelled
edges in the centre of the soft board panels on
both sides.
(v) Rate includes sealing all the joints, beading for
the glass, grooves in laminate, melamine polish to
the moulding, beading & t.w members, complete
as per the directions of Architect. All Aluminium
sections shall be smooth, rust free, straight,
mitred and jointed mechanically. All works shall be
carried out as per Architectural drawings and the
directions of Engineer-in-charge.
Minimum Weight and makes of Aluminium
sections to be as under:
-Section 2" X 2" 16 Gauge = weighing @(3.200
kg/ 12RFt.)
-Sections 2" X 1" 16 Gauge = weighing (2.100
kg/ 12RFt.)
Make of Aluminium sections: Jindal / Hindalco /
MAAN
Particle board Make: Eco boards/ Archid / Bhutan
/ Willson.
INTERIOR FIXED ASSETS WORKS Page5 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
A --do-- as above but providing and fixing Partition
using Both side finished in 1.0 mm thk Laminate
as shown in drawing or as directed by Architect.
Laminate Make : Royale
touche/Century/Greenlam/ Merino or equivalent
approved make
110 Sft
B Partition using Both side finished in with 4.0 mm
thk approved veneer finished with melamine
polish as shown in drawing or as directed by
Architect.
Make: Century / Durian / Archid or equivalent
approved mak
68 Sft
4 Full Height Fully Glazed partition
A Providing and erecting in position full height
12mm thick Toughened Glass partiton fixed on
Patch fittings of Dorma/Hefle/Ozone of equivalant
approved by SBIIMS including 12mm thick
Toughned Glass door fixed on Heavy duty Dorma
or equivalant approved make Floor spring, 30mm
dia. & 600mm long S.S handle and locking
assembly from Dorma/Ozone complete.
The rate includes providing and pasting frosted
polyster film or bank's approved advertising film of
3M with computer aided design & cutting in
various colors & shade on the glass partitions &
Doors.
The scope of work includes cutting chases to the
floor and reinstating the same to its original
position without any extra cost including the cost
of other fittings & fixtures & hardware such as
spider panels, glass to glass contactors etc
complete, making necessary holes, joints to be
sealed with silicone sealant on all sides complete
in all respects etc as per directions of Architect.
The rate shall be inclusive of bent curved glass
panels wherever the partition is curved in profile
as shown in the layout plan. 225 Sft
B Providing and fixing BACK PAINTED 12MM THK.
Toughned GLASS.
Make: Modi float Glass, Triveni Glass Ltd., Indo
Asahi Glass Co.Ltd./ Saint Gobain 90 Sft
5 Partitions above False Ceiling
INTERIOR FIXED ASSETS WORKS Page6 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
Providing and extending frame works of full height
partitions wherever directed and finishing with 12
mm thk Exterior Grade Particle Board on both
sides and finishing the same with approved paint
including insulating with approved insulating
material upto soffit of beam or ceiling including
properly anchoring the same using Anchor
Fasteners etc. complete making necessary cut-
outs for AC ducts etc. complete wherever
directed. 100 Sft
6 PANELLING : -
(a) Providing and fixing in position wall/column
panelling made out of :
(i) Main frame comprising of 2" X 1" size
Aluminium sections (weighing 2.10 kg/ 12 Rft) of
Jindal / Hindalco / Maan or equivalant approved
make fixed to wall at 1'-6" to 2'-0" C/C in both
horizontal as well vertical direction including
providing extra frame/members as required as per
site condition below beam/slab soffit for running
conduit etc.
(ii) Providing 12mm thk exterior grade approved
quality and make Partical board to the framing.
(iii) Providing and pasting 4mm thk Veneer of
Archid, Green, Duro, Centure or equivalant
approved make including 3 coats of melamine
polish over approved base sealer coat including
contrast skirting & band at top in the same
alignment with a groove, teakwood moulding of
approved size complete as shown in the detailed
drawing or as directed by Architect.
335 Sft
(b) --do-- as above in item No.6(a) but Top finish of
the Column/Wall panelling with 1.0 mm thk
laminate of Century / Durian / Archid or equivalent
approved make including skirting & band at top
complete as shown in detailed drawing or as
directed by Architect380 Sft
(c ) --do-- as above in item No.6(a) but Top finish of
the panelling with Interior Grade ACP of Aluco
bond/ ALU Decor/ Alstrong / Alstone or equivalent
approved make including skirting & band at top
complete as shown in detailed drawing or as
directed by Architect.
Rate to include cost of necessary partical board /
ply backing to match the level of other finishes
such as veneer /laminate etc. in required areas.
515 Sft
INTERIOR FIXED ASSETS WORKS Page7 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
D --do-- as above but providing approved Fabric
over 9 mm thk commercial ply backing over
aluminium frame of specified makes. All around
the panelling, decorative teak wood mouldings
shall be provided and shall be finished with
melamine polish complete as per the instructions
of Architect.(Basic Price of fabric Rs.200/- to Rs.
275/- per meter).
80 Sft
E --do-- as above but providing wall panelling using
12mm thk IS:303 Commerical ply of
Green/Duro/Centure or equivalant approved
makes backing over aluminium framing finished
with 3mm thick designer, decorative MDF board
finished with two or more coats of Duco paint of
approved make, shade, colour & texture including
teakwood moulding of 3mm size all around the
periphery as directed by Architect. 178 Sft
F Providing & Fixing Soft Board panelling over
framework of 25 mm x 18 mm T.W. Frame at 600
mm c/c with 6mm IS:303 Commercial ply skining
on top & 12mm thk. soft board with fabric finishing
over ply complete as per drawings & directions of
the Architect/Engineer-in-charge, 25 mm x 12 mm
T. W.Moulding on edges (Basic Price of fabric
Rs.250/- meter). 60 Sft
G Providing & Fixing in position Mirror Panelling
using 6 mm thick Mirror of approved make over
19mm thick Archid/Green/Duro/Century or
equivalant approved make commercial board
backing. The mirror to be fixed with T.W beading
of size 12.5mm X 19mm, finished including
melamine polish complete as per the instructions
of Architects/SBIIMS.50 Sft
H --do-- as above in Item No. 6(a) but providing and
fixing column/wall panelling finished with 6mm thk
Corian approved shade, colour & texture over
12mm thk particle board / 9mm thk plywood over
Aluminium frame including teakwood moulding of
3mm size all around the periphery as directed by
Architect 280 Sft
INTERIOR FIXED ASSETS WORKS Page8 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
I --do-- as above but providing and fixing Wall &
Column Panelling finished with approved quality
and make 12mm thick MDF board and finished
with PU machine polish including necessary
surface preparations, etc complete in approved
shade, colour & texture including necessary
teakwood moulding of 3mm size all around the
periphery as directed by Architect
260 Sft
7 Flush doors
a Providing and fixing in position 32/35mm thk
factory make water proof Solid Core Flush door
shutters for Toilets, cabins, ancillary areas
specified to match the solid partitions including
2nd class BTC ( Berma Teak Wood ) frame of
100 X 50mm finished with 1.0 mm thk approved
laminate on both sides including providing 6mm
thick seasoned Teak wood lipping to edges duly
polished/painted in matching shade,
Dorma/Dorset/Hefle make door closure,
cylinderical mortise lock of Doset /Godrej with
computerised key, SS handles, 3 Nos. S.S.Butt
hinges (125x32x2mm), S.S.tower bolt 150 mm
etc. complete as per the directions of Architect.
Samples of all Hardware fittings to be got
approved from the SBIIMS/Architect prior to its
use at site.
(i) For Toilets (Without Mortice Lock) 84 Sft
(ii) For Cabins and other ancillary areas. 63 Sft
8 FULLY GLAZED DOOR :
Providing and fixing in position 12mm thick
toughened glass door including fixed side panel.
The door to be fixed with heavy duty Dorma make
floor spring, providing 300mm long 30mm dia SS
pipe handle and door lock of Ozone/Dorma or
equivalent make with necessary cutting chases in
floor and restoring the same to its original position
complete. Rate to include providing suitable
wooden Top and bottom rail, frosted Polyster film
as per detailed Architectural drawing complete.84 Sft
9 FALSE CEILING
INTERIOR FIXED ASSETS WORKS Page9 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
A Gypsum Board Ceiling: Providing, fabrication
and fixing in position of false ceiling at a hight of
10'0" from floor (or the hight will be desided on
spot as per the site conditions) by fixing 12 mm
Th. Gypsum Board sheets on frame work of GI
sheet section. The main runners of 22 gauge GI
sheet and cross runners of 24 gauge GI sheet
must be framed to form a mesh of 2'0"x2'0" c/c.
The Gypsum Board must be fixed to the GI frame
and joints must be properly filled in with POP
paste and paper tape, supplied by the
manufacturer, to get a leveled smooth ceiling,
including acrylic paint three or more coats.
Recessing of the Gypsum Board for light fixtures
must be done alongwith extra frame work of GI
sheet section to hold the consealed light fixtures. 1300 Sft
B False Ceiling ( Armstrong )
Providing and erecting false ceiling of Mineral
Fiber ceiling Board Armstrong or equivalent
approved make with framework, runners, cross
runners & suspenders from the existing ceiling as
per the manufacturers details and specification
and 600X 600mmX 15mm thk tiles of approved
design, texture & in microlook pattern including
the grids in black / white silhoutte pattern, 15mm
as per manufacturers specifications complete
including making necessary cut-outs for electrical
fixtures, AC diffusers, access etc as per the
instructions of the Architect.
Approved preminum Tile in Dune RH Microlook
category with black silhouette locking supporting
system, 15 mm grid.
Make: Armstrong /Indian Gypsum Board/Gypro.
550 Sft
C Providing and erecting false ceiling in veneer with
12 mm thk marine ply backing on teak wood
frame to be anchored to the main ceiling with
cross runners tongued and grooved. The ply to be
finished with approved 4mm thk veneer &
melamine polish etc. complete as per directions of
the Architect.
Venner Make: Century / Durian / Archid or
equivalent approved make
40 Sft
D Providing and erecting false ceiling in ACP with 12
mm thk marine ply backing on teak wood frame to
be anchored to the main ceiling with cross
runners tongued and grooved. The ply to be
finished with approved 3mm thk interior grade
ACP complete as per directions of the Architect.50 Sft
INTERIOR FIXED ASSETS WORKS Page10 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
E Providing and erecting false ceiling in colored
Corian with 6mm thk Corian over 12mm thk
marine plywood backing on teak wood frame to
be anchored to the main ceiling with cross
runners tongued and grooved, finishing the same
with corian of approved shade, colour & texture as
directed by Architect & complete as per drawings
& details. 50 Sft
10 Providing & Applying Plaster of Paris Punning up
to average thickness of 12 mm thk. on existing
walls to proper level & plumb, including Groove
Complete as per site conditions & directions of the
Architect. 500 Sft
11 Providing and erecting in position Plaster of Paris
Cornices 3" x 3" in size to the false ceiling.
Including filling the gaps with POP & painting the
same with Acryllic Emulsion paint of approved
colour and texture as per instruction of Architect. 150 Rft
12 Same as above but Roller Blinds of approved
make with supporting framework etc. of approved
make, shade & colour complete in working order
with triple spring arrangement as per
manufacturers specifications & drawings &
directions of the Competent Authority.
Make: Vista / MAC / DACK / Hunter & Douglas
50 Sft.
13 Providing and fixing Full height Storage of ht. 7'-
0" and depth as specified in the drawings as per
specification below.
Skeleton - made out of 19 mm. thk Commercial
ply at end verticals, top and bottom and verticals
450mm to 600mm Centres as shown in drawing
and 6 mm thk back marine ply.
SHELVES - 19mm Thk. Plywood top and edges
finished in 0.8mm thk. Laminate to accommodate
file height removable and supported on pins.
SHUTTERS-made out of 19mm thk. commerical
ply externally finished in 4.0mm thk. Veneer with
melamine polish or 1.0 mm thk laminate and
internally finished in 0.8 mm thk. laminate as
shown or directed.
HINGES - Each shutter shall have 100mm long
oxidised brass butt hinges. Mimimum 4 nos.
hinges for each of the shutter for Full height
Storage and 3 Nos. Brass hinges for each of the
shutter for Low Height Storage to be provided.
BOLTS - Flush tower bolts from inside at top and
bottom to the shutters and magnetic catch fixed
top and bottom.
INTERIOR FIXED ASSETS WORKS Page11 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
LOCKS - of approved make 4 -lever brass body
dead lock with S.S. Key.
HANDLES - 100mm wide handles of C.P.. brass
as approved by the Architect.
SKIRTING -As instructed by Architect, in marine
plywood finished in Laminate.
BACK - Back side of storage to have 6mm thk.
Commerical ply with polish finish.
Finishing :- All external surface finish with 1.0mm
thk approved laminate. All the exposed wood
surfaces shall be finished in melamine polish. In
side visible surface complete with 0.8mm thk
Laminate. Top to have Teek wood moulding as
instructed. All internal wood-work to have coat of
anti termite of approved make before polishing. 90 Sft
SUM TOTAL OF SCHEDULES - INTERIOR
FIXED ASSETS WORKS Rs.
SIGN & SEAL OF THE CONTRACTOR
INTERIOR FIXED ASSETS WORKS Page12 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
SCHEDULE - FURNITURE WORKS
N.B: - The plywood considered in this estimate shall be IS: 303
grade commerical Plywood for all the items of Interior & Furniture
works. The rate shall be inclusive of anti termite coating on all
sides to plywood, teak wood & all the other wooden components
of Asian paints or equivalent approved make.
1 Providing and fixing Low height Storage of ht. 2'-6" or 4'-0" as
desired and depth of 18" as specified in the drawings as per
specification below.
Skeleton - made out of 19 mm. Thk IS:303 Grade commerical
Plywood (IS:303) at end verticals, top and bottom and verticals
450mm to 600mm Centres as shown in drawing and 6 mm thk
back ply.
SHELVES - 19mm Thk. IS:303 Grade commerical Plywood
finished with approved quality 0.8mm thk. Laminate on both
faces including edges to accommodate file height removable and
supported on pins.
SHUTTERS-made out of 19mm thk. IS:303 commerical Plywood
externally finished in MDF with PU or 1.5mm thk laminate or
3.0mm thk. Veneer with melamine polish and Internally finished
in 0.8 mm thk. Laminate as shown or directed.
HINGES - Each shutter shall have 100mm long oxidised brass
butt hinges. Mimimum 4 nos. hinges for each of the shutter for
Full height Storage and 3 Nos. hinges for each of the shutter for
Low Height Storage to be provided.
BOLTS - Flush tower bolts from inside at top and bottom to the
shutters and magnetic catch fixed top and bottom.
LOCKS - of approved make 4 -lever brass body dead lock with
S.S. Key.
HANDLES - 100mm wide handles of C.P brass as approved by
the Architect.
SKIRTING -As instructed by Architect, in plywood finished in
approved 1.0 mm thk laminate or 4.0 mm thk veneer with
melamine polish.
BACK - Unexposed back side of storage to have 6mm thk 303
commerical Plywood with polish. However exposed back of the
storage shall be finished with 1.0 mm thk laminate finish.
TOP - To be finished with 12mm thk Corian top duly finished.
A Finishing :- All external surface finish with 1.0 mm thk approved
laminate. Exposed top to be finished in 12mm thk designer
Corian and shutters in MDF board with PU including necessary
surface preparation, finishing the same etc complete. All
exposed surfaces shall have beading patti in laminate. Inside
visible surface complete with 0.8mm thk Laminate. Rate shall
also include tw moulding for the top duly polished wherever
instructed.
80 Sft
PROPOSED INTERIOR RENOVATION WORK FOR STATE BANK OF INDIA, VASHI
SECTOR -17 BRANCH AT VASHI NAVI MUMBAI
FURNITURE WORK Page13 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
C Finishing :- All external surface finish with 4.0 mm thk approved
veneer with polycoat polish. Exposed top to be finished in 12mm
thk designer Corian and shutters in MDF board with PU including
necessary surface preparation, finishing the same etc complete.
All exposed surfaces shall have beading patti in laminate. Inside
visible surface complete with 0.8mm thk Laminate. Rate shall
also include tw moulding for the top duly polished wherever
instructed.
32 Sft
FURNITURE WORK Page14 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
D Finishing: - Do - Same specifications & including all items as
mentioned above, but Overhead storage of 2'-0" height and
length as desired for the server room, UPS room & Pantry to be
finished with approved 1.0mm thk approved laminate. The top of
this storage shall also be finished with approved 1.0 mm thk
laminate.
20 Sft
2 Providing and erecting in position Side Credenza for the tables,
2'6" height and 18" deep to be made out of 19mm thk 303
commerical Plywood . All exposed surfaces shall have beading
patti in laminate / veneer with melamine polish. Rate shall also
include tw moulding for the top duly polished wherever instructed
with 2 nos of drawers on top and openable shutters below. The
openable shutters to be made out of 19mm thk. 303 commerical
Plywood with all internal surfaces to be finished in 0.8 mm thk
approved laminate and externally with 1.0 mm thk laminate or
4.0mm thk veneer with melamine or polycoat polish including
brass hinges, ball catches, 100mm brass handles, brass locks
etc complete as per the instruction of the Architect.
A All exposed surfaces to be finished with approved veneer, 4 mm
externally with polycoat polish as directed.
Make: Century / Durian / Archid or equivalent approved make
9 Sft
B All exposed surfaces to be finished with approved 1.0 mm thk
laminate externally as directed.
Make: Royale touche/Century/Green lam/ Merino or equivalent
approved make
18 Sft
C Finishing :- All external surface finish with 4.0 mm thk approved
veneer with polycoat polish. Exposed top to be finished in 12mm
thk designer Corian and shutters in MDF board with PU including
necessary surface preparation, finishing the same etc complete.
All exposed surfaces shall have beading patti in laminate. Inside
visible surface complete with 0.8mm thk Laminate. Rate shall
also include tw moulding for the top duly polished wherever
instructed.
8 Sft
3 Table for B.M (Maximum 6'-6" X 3'-0")
Providing and supplying table for the B.M to be made out of
19mm thk. IS: 303 Grade commerical Plywood finished with
approved 4.0mm thk high end veneer with polycoat polish for
the top & 4.0 mm thk veneer with melamine polish for all other
exposed areas. The top of the table to have t.w. moulding all
around. The rate shall be inclusive of providing a keyboard tray
on sliding telescopic channels & a pedestal drawer unit made out
of 16mm thk IS: 303 commerical Plywood on side with 2 nos of
equal sized drawers on sliding channels & openable shutter
below. The side credenza shall be on the other side & shall be
paid for seperately under the relevant item. All internal surfaces
to be finished in approved 0.8mm thk laminate. All the external
surfaces shall be finished with 4.0mm thk approved high end
veneer with melamine polish including the pedestal drawer unit.
1 Nos
FURNITURE WORK Page15 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
The table shall have 6mm thk clear glass on top with bevelled
edges. The rate shall also include CPU trolley of reputed
manufacturer, keyboard tray as per the approved makes which
shall be heavy duty. The necessary hardware such as automatic
locking, ball catches, wire managers etc. to be provided as per
the instructions of the Architect. The Elevation of the table shall
be as directed by Architect on site.
4 OfficersTable (5'-0" X 2'-6")
Providing and supplying table for the Senior Officer / Manager to
be made out of 19mm thk IS:303 Grade commerical Plywood
finished with approved 12mm thk Corian for top including 1.0 mm
thk laminate for all other exposed areas. The top of the table to
have corian moulding all around. The rate shall be inclusive of
providing a keyboard tray on sliding telescopic channels & a
pedestal drawer unit made out of 16mm thk IS : 303 Grade
commerical Plywood on side with 2 nos of equal sized drawers
on sliding channels & openable shutter below finished in 1.0 mm
thk laminate. The side credenza shall be on the other side &
shall be paid for seperately under the relevant item. All internal
surfaces to be finished in approved 0.8mm thk laminate.
2 Nos
All the external surfaces shall be finished with 1.0mm thk
approved laminate including the pedestal drawer unit. The rate
shall also include CPU trolley of reputed manufacturer, keyboard
tray as per the approved makes which shall be heavy duty. The
necessary hardware such as automatic locking, ball catches,
wire managers etc. to be provided as per the instructions of the
Architect. The Elevation of the table shall be as directed by
Architect on site.
5 Linear Work Stations for Staff
Providing and erecting in position linear work station of 3'-0" in
length and 2'-0" in width as per the instructions to be made out of
19mm thk. ply for work top with the top to be finished with 3.0mm
thk approved veneer with melamine polish for the top surface
with front part of it in t.w moluding out of 1 1/2" X 1 1/2" t.w
section to be finished with veneer and melamine polish & 0.8mm
thk approved laminate for the bottom portion of the work top to
be supported on the adjacent low height partitions. (The
partitions shall be paid for seperately under the relevant item).
The rate shall be inclusive of necessary fittings, supporting
arrangements to the partitions, heavy duty keyboard tray of
standard make, CPU trolleys of approved make & a pedestal
drawer unit with castors to be made out of 16mm 303
commerical Plywood with 3 nos of equal sized drawers on
telescopic channels.
4 Nos
The external exposed surface of the drawer unit shall be finished
with 4.0mm thk approved veneer with melamine polish. The unit
shall have locks, handles, hinges, channels, necessary fittings,
fixtures, hardware, automatic locking arrangement, wire
managers etc. The internal surfaces of the drawer unit shall have
polish and the internal surfaces of individual drawers shall be
finished with 0.8mm thk approved laminate including providing
the necessary openings for electrical/computer wiring complete
as per the instructions of Architect. The rate shall also include
providing stand-alone foot rest to the table of projection width as
directed to be finished with approved veneer with melamine
polish etc complete for the entire length of the table. Elevation of
the table shall be as directed by Architect on site.
FURNITURE WORK Page16 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
The unit shall have heavy duty locks, handles, hinges, channels,
necessary fittings, fixtures, hardware, automatic locking
arrangement, wire managers etc. The internal surfaces of the
drawer unit shall have polish and the internal surfaces of
individual drawers shall be finished with 0.8mm thk approved
laminate including providing the necessary openings for
electrical/computer wiring complete as per the instructions of
Architect. Elevation of the table shall be as directed by Architect
on site.
6 WORKSTATION FOR SWO's & CASH ( 5'-0" x 2'-9" )
Providing and erecting in position linear work station of maximum
of 5'-0" length and 2'-9" width as per the instructions and
drawings to be made out of 19mm thk. 303 commerical Plywood
for work top and verticals finished with 1.0mm thk approved
laminate externally for all the exposed surfaces except the top,
which shall be finished with 12mm thk Corian top including
necessary surface preparation, finishing the same etc complete
& 0.8mm thk approved laminate internally. The top of the table to
have Corian nosing mould all around. The rate shall be inclusive
of providing a keyboard tray on sliding channels & a drawer unit
on side with 2 nos of equal sized drawers on channels with
internal seperations in ply for keeping temporary cash &
openable shutter below.
4 Nos
The side credenza however shall be paid for seperately in the
relevant item. The rate shall be inclusive of CPU trolley of
approved make, necessary fittings, fixtures, hardware such as
channels, hinges, ball catches, automatic locking arrangament,
wire managers etc including providing the necessary openings
for electrical/computer wiring complete as per the instructions of
Architect. Elevation of the table shall be as directed by Architect
on site.
7 Providing & Errecting in position, bevelled Glass dividers out of
10mm thk glass between the two workstations admeasuring
approx 2''-3" X 1'-6" to be placed in position with the D-brackets
including bevelled edging of the glass, etching / frosted film etc
complete
6 Nos
FURNITURE WORK Page17 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
8 Grahak Mitra counter
Providing and supplying Grahak Mitra counter of size 6'-0" in
curvature and 2'-6" height with chamfer edge glass 12mm thk for
top on stainless steel hollow pipes 75mm dia & height below 1'-
0". The table below the pipe to be made out of 19mm thk IS:303
grade commerical Plywood with front apron to have 19mm thk
IS:303 grade commerical Plywood hollow box to be finished with
approved 18mm thk onyx italian marble including provision of
coloured lighting behind the onyx for glowing effect. The top of
the table shall be provided with approved 12mm thk Corian
including necessary surface preparation, finishing the same etc
complete with a cut out for Monitor with 12mm thk glass on the
top of the table with pedestal drawer unit with castors comprising
of 3 nos of drawers on side to be finished with approved 3.0mm
thk approved veneer with melamine polish, CPU trolley of
standard make and a shelf for keeping the Monitor below the
glass top with heavy duty keyboard tray on sliding channels of
standard make including s curved in profile as shown in the
layout plan.
1 No
All exposed surfaces of the counter shall be finished with
approved 18mm thk italian marble except for the top in Corian &
drawer unit which shall be finished with 4.0mm thk veneer with
melamine polish & internal surfaces shall be finished with 0.8mm
thk laminate including making the necessary openings for wires
of telephone boards, PC, grooves, mouldings, etc complete.
9 DINING TABLE
Providing and supplying 5'-0" rectangular dining tables made out
of 10mm thk Glass top with design etching pattern with bevelled
edges. The table to have Stainless steel stand of 4" dia. Pipe in
the centre with 4 flange supports in a cross pattern at top &
bottom etc. complete as per instructions and drawings.
1 No.
10 Computer Counter
Providing and erecting computer counter (2'-3") wide to made out
of 19mm thk. 303 commerical Plywood . The counter to have
lockable heavy duty keyboard trays with a pedestal drawer unit
with 3 nos of equal sized drawers at regular intervals as per the
plan in 19mm thk. IS: 303 commerical Plywood with necessary
opening for electrical wiring & sockets. The counter shall be
finished with approved 1.0mm thk laminate for all the external
exposed areas and polish internally etc complete as per design &
instructions. The rate shall be inclusive of CPU trolleys, foot rest,
wire manager, provision for electrical sockets etc complete.
5 Rft.
11 Corner Table ( 2'-0" x 2'-0" )
Providing and supplying in position corner table to be made out
of 2" x 2" t.w. frame with 12mm thk. clear glass top with bevelled
edges and etching with melamine polish etc. complete.
2 No.
12 Center Table (3'-0" X 2'-0" Oval / Rectangular)
Providing and supplying in position oval center table to be made
out of 2" x 2" t.w. frame with 12mm thk. clear glass top with
bevelled edges and etching with melamine polish etc. complete
as instructed by Architect.
1 No.
FURNITURE WORK Page18 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
13 WRITING DESK
Writing desk at entrance area in 19mm 303 comm. Ply and 1mm
laminate finish surface 12 mm clear glass on top with
shelves/partation in glass to keep sleep books including acid
etching / frosting of approved design and exposed edges in
machine polished.and bank’s printed broachers for public
complete as per Architect’s design and instructions. Size: 3’-0” x
1’-6” x 1 no.
1 No.
14 Planter Boxes (18" Dia)
Providing and supplying 14" dia planter boxes to be made out of
19mm thk. 303 commercial ply to be with approved veneer,4mm
thk externally & painted from inside including G.I. Tray for the
base as per the drawing and instructions of the Architect etc.
complete.
5 Nos.
15 Artificial Plants
A Providing and supplying artificial plants approved by Architect
such as moss and including necessary stand for holding the
plants as per the approved sample.
5 Nos.
B Same as above but medium size 8 Nos.
16 Trap Door
Providing and erecting in position trap door in 12mm thk 303
commerical Plywood to house, A.C. ductable units to be made
out of 2" x 11/2" t.w. frame with openable shutter in ply with
necessary hinges, tower bolts, locks, painting etc. finished as per
the instructions and design.
50 Sft
17 Sun Control film
Providing and fixing designer etching frosted film of approved
make and shade (3M, Llumar or approved equivalent make by
the Bank) to the glass complete as instructed by Architect
50 Sft.
18 PELMETS:
Providing and fixing 5" wide Pelmet with 18mm thk IS:303
commerical Plywood including t.w lippings on all edges of the
plywood and finished on both sides etc complete as per the
instructions.
Finished in 1.0mm thk approved laminate on both sides 30 Sft
Finished in 4.0mm thk approved veneer with melamine polish on
both sides30 Sft
19 Collapsible Gate
Providing and fixing in position collapsible steel shutters with
vertical channels 20x10x2mm and braced with flat iron diagonals
20x5mm size, with top and bottom rail of T-iron 40x40x6mm, with
40mm dia steel pulleys, complete with bolts, nuts, locking
arrangement, stoppers, handles, including applying a priming
coat of approved steel primer and 2 or more coates of approved
synthetic enamel paint of approve shade and make to give and
even shade.
160 Sft
20 NOTICE BOARD:
Providing and Supplying Notice Boards 8 cm deep made out of
BTC T.W framing 8cm X 24mm with 12mm thick Soft Board
covered with cloth felt on 6mm IS:303 Commerical grade Ply
back and glass shutters openable on pivot hinges complete with
lock and handle. Size-1.20 m X 60 cm complete as per the
drawings, details & instructions of Architect.
1 Nos
FURNITURE WORK Page19 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
21 WHITE BOARD WITH CERAMIC COATING:
Providing and fixing White board(magnetic) with ceramic coating
including soft board with fabric of approved shade and design
complete as per the drawing & specification given by Architect .
30 Sft
22 PATTA & BANDS:
Providing and fixing 75mm wide Patta on the wall with 12mm thk
IS:303 Grade commerical Plywood including 12 mm t.w beading
with polishing etc complete as per the instructions.
a Finished in 4.0mm thk approved Veneer with melamine polish 60 Sft
b Finished in 1.0mm thk approved laminate. 10 Sft
cFinished in 4mm thk MDF with melamine polish / acryllic
emulsion paint 70 Sft
23 KEY HIVE:
Providing & Fixing Key hive of size 600 X 900mm made out of
12mm thk IS:303 grade commerical Plywood backing with
openable type shutter to be made out of 19 X 75mm outer frame
with 6mm thk glass. All exposed surfaces to be finished with
1.0mm thk approved laminate and all internal surfaces to be
finished with 0.8mm thk approved laminate including 75mm
handle, 2 nos of 75mm hinges for the shutter, locks etc complete
as per the drawing.
1 Nos
SUM TOTAL OF SCHEDULES - FURNITURE WORKS Rs.
SIGN & SEAL OF THE CONTRACTOR
FURNITURE WORK Page20 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
SCHEDULE - CIVIL WORKS
1 Demolition / dismantaling
A Demolishing brick work manually/ by mechanical means on
Ground floor level and all floors up to 6th floor including stacking of
serviceable material and disposal of unserviceable material within 50
metres lead. Including carting away the unserviceable material to
dumping ground Location as approved by Municipal Corporation of
Navi Mumbai immediately at intervals Cu.ft. 30
B Demolishing R.C.C. work,flooring, precast concrete jalli
manually/ by mechanical means on Ground floor level and all floors
up to 6th floor; including stacking of steel bars and disposal of
unserviceable material within 50 metres lead. Including carting away
the unserviceable material to dumping ground Location as approved
by Municipal Corporation of Greater Mumbai immediately at
intervals Cu.ft. 50
C Demolishing/dismantaling loose furniture, false ceiling,
electrical fixture etc. of all type of existing , partitions, false ceiling,
loose equipments, doors, windows & fixed glazing, fans, lighting
fixtures, electrical assessories of all types, gadgets, cables & wires,
AC ducts & grills, All type of AC assessories, Fire pipes, Sprinklers,
All other type of Electrical Assessories, table & credenzas, storage
units of all types, all types of furniture & fixtures, workstations,
Interior items, fixed & loose items, as per directions etc and any
other material required for working on site & compliance of all the
activities on site L.S
The quoted amount shall also include the removal of debris from site
on day to day basis including removing the same with utmost care to
ensure no damage in case of reusable fixtures, fittings, assessories
& materials of all types including handing over the same to the State
Bank or shifting the same to a new desired place and re-fixing the
same if desired under the instructions and directions of the
Consultant or Bank's Engineer-in-charge.
2 PAINTING :
Note : The Rates for the Painting works shall be inclusive of three
coats. The paint should be free from lead and Arsenic.
A Painting of wall with minimum of 3 coats of Flat Oil Paint of approved
shade & make on the wall, plywood or gypboard including all
necessary surfaces preparation. The wall shall be cleaned, filled with
putty & applied with one coat of primer so as to achieve a even
surface to apply paint. As per the directions / to the satisfaction of
the Architect / Engineer in charge.
Make: Asian/Nerolac/ Berger/Dulex.
100 Sft
B Providing and applying acrylic aggregate textured wall coating in
oikos pigmented Ornaplast finish in any shade spray coat bubble or
compact or rustik shade, maintaining material consumption rate of
average 2.25 Kg. Per sq.mt. and 1.5mm thickness on walls. The rate
shall include POP punning to the wall up to average thickness of 12
mm to proper level & plumb, including grooves etc, scrapping, base
coats etc, cleaning of the walls etc complete.
Make:Sandtex Matt/ Dulux/Berger.
80 Sft
PROPOSED INTERIOR RENOVATION WORK FOR STATE BANK OF INDIA, VASHI SECTOR -17 BRANCH AT
VASHI NAVI MUMBAI
CIVIL WORKS Page21 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
C Providing and applying Acrylic Emulsion Paint in minimum of three
coats of approved make and shade on Walls, Ceiling, plywood,
gypsum board, surfaces etc including all the necessary surfaces
preparation, POP punning to the wall up to average thickness of 12
mm to proper level & plumb, including grooves etc scrapping, base
coats etc to receive 3 coats of paint. The wall shall be cleaned, filled
with putty & applied with one coat of primer so as to achieve a even
surface to apply paint. As per the directions / to the satisfaction of
the Architect.
Make: Asian/Nerolac/ Berger/Dulex
3500 Sft
CIVIL WORKS Page22 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
3 FLOORING :
a Providing and laying 9mm thk Mirror finish super-premium range,
digital and high gloss Vitrified Tiles of approved makes of size 600
x 600 x 9mm thk (Min) laid in required pattern on an avg. 25 to
30mm thk. bed of 1:4 cement mortar (1 cement : 4 coarse sand)
including inlay design work in 18mm thk Granite stone and contrast
dark coloured Vitrified tiles approved by the Architects and approved
design in proper line and level including neat white cement float,
filling joints with neat cement slurry, of appropriate colour, curing and
cleaning complete.Tiles shall be free of any variation in colour or
texture, and laying plastic sheet & 18mm thk. POP protective cover
on flooring and removing when directed.
50 Sft
The cost to include sealer treatment of approved brand. The rate
shall be inclusive of application chemicals and Roffe and levelling
with min 3" PCC wherever level difference is observed to attain a
uniform level all throughout the premises. The rate shall also include
providing and fixing heavy duty brass patti of desired length, width
for the areas of the inlay works etc complete as directed by the
Architects.
Make: Kajaria/ Somany / H.R.Johnson/ Nitco / Simpolo
b Providing and laying Laminated Wooden flooring of approved make
on floor in a design combination of two different colours as per the
drawing & instructions on levelled floor including levelling the surface
of application area with P.C.C, insulating the areas, surface
preparation, bedding, finishing, polishing, cleaning including skirting
patti as per manufacturers specifications, moulding etc complete as
per the directions and instructions of the Consultant. The rate shall
be inclusive of edge moulding & end strips at the junction between
the floor and the vertical surfaces and mouldings, T grooves etc
complete. (Basic rate of tiles = Rs. 180 / Sq Fts.)
Make: Pergo/Tiles/ Xylos/Armstrong/Vista.
200 Sft
4 Providing and placing ready made SS'dust bins' of diameter not
less than 300 mm made out of perforated SS sheet with edges
rounded, the base shall be of SS plate of thickness not less than
2.00 mm
9 Nos
5ALUMINIUM COMPOSITE PANELS & STRUCTURAL GLAZING
CLADDING ON EXTERNAL FRONTAGE WALLS
Supplying and errecting in position combination of Exterior Grade
Aluminium Composite Panels and Structural coloured Glass of
approved make including 4 mm thick comprising of polyethylene
core between two skins of Aluminium with exterior surface coated
with DVDF resins as per ASTM or BS standards including
Aluminium wall brackets. Aluminium runners horizontal and vertical
as per the Manufacturers standard errection including filling of the
gaps etc finish. Detailed technical annexure of manufacturer will be
approved by the Architects.
140 Sft
6 CANOPY
Providing and errecting in position canopy over the entrance in M.S
frame of 50 X 50 angles & placing over the same 1" X 1/2"
Aluminium frame and 12 mm Marine ply & placing over the same
Aluminium composite Panels with top coverage in G.I Sheets
115 Sft
SUM TOTAL OF SCHEDULE - CIVIL WORKS Rs.
CIVIL WORKS Page23 of 25
INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES
Description Qty. Unit Rate Amount
SIGN & SEAL OF THE CONTRACTOR
CIVIL WORKS Page24 of 25
SHETGIRI and ASSOCIATES
No. Description Qty. Unit Rate Amount
A TOTAL OF INTERIOR FIXED ASSET WORKS Rs.
B TOTAL OF FURNITURE WORKS Rs.
C TOTAL OF CIVIL WORKS Rs.
D TOTAL OF ELECTRICAL WORKS Rs.
TOTAL COST OF INTERIOR RENOVATION &
FURNISHING AND ELECTRICAL WORKS
(A+B+C+D)
Rs.
GRAND TOTAL
(GST will be paid extra as per actual )
SIGN & SEAL OF THE CONTRACTOR
PROPOSED INTERIOR RENOVATION WORK FOR STATE BANK OF INDIA, VASHI SECTOR
-17 BRANCH AT VASHI NAVI MUMBAI
SUMMARY STATEMENT
SUMMARY Page25
top related