interior signs -...
Post on 26-Jul-2020
5 Views
Preview:
TRANSCRIPT
UNIVERSITY OF DELAWARE-FACILITIES DESIGN STANDARDS
FACILITIES PLANNING & CONSTRUCTION CSI: SECTION 10400
REV 01/08 - 1 - fds\pdf\fpc\interiorsigns.pdf
INTERIOR SIGNS
UNIVERSITY CONTACT:
Facilities Planning & Construction
(302) 831-1744
Structural Services
(302) 831-8456
GENERAL INFORMATION:
For information on the UD Interior Sign System Standards and specifications contact Gina
Sinovich.
Mount room numbers in accordance with signage schedule to the latch side of door.
A person must be able to approach within 3" of the signage without any obstructions.
High Vandalism Mounting Method:
Use aggressive white foam tape with 100% coverage and size 6 x ¼” length spanner SMS
stainless steel black oxidized screws to secure inserts.
APPROVED MANUFACTURERS:
Fabricator can be UD Lock Shop or as approved by FP&C.
DO’S AND DON’TS:
DO’S:
DO Provide signs per the standards. The signage schedule is to be approved by FP&C.
DON’TS:
DO NOT Deviate from the standards without approval from FP&C.
-- END OF SECTION --
top related