intro to cad with nx · how is cad used in industry/research? what is different about nx from other...

Intro to CAD with NXWIAA Technical Seminar

Monday, 4/15/2019, 5:00 - 7:00 pm

Women in Aeronautics and Astronautics

Overview

● How is CAD used in industry/research?

● What is different about NX from other CAD software?

● Today we’ll cover

○ Making parts

■ Creating sketches, extruding, revolving, cuts, constraints)

○ Controlling the orientation and view in NX

○ Creating assemblies from parts

○ Patterning

○ Drawings and rendering if time allows

● Access files for today at ter.ps/wiaaNXfiles

● Access drawing at ter.ps/wiaaNXdwg

Women in Aeronautics and Astronautics

The CADing Process:

● Making (sculpting) parts:

● Assembling parts:

● Technical Drawings:

Women in Aeronautics and Astronautics

Extrude

1. Make sketch

Women in Aeronautics and Astronautics

Extrude

2. Extrude the sketch

Women in Aeronautics and Astronautics

Extruded Cuts:

Women in Aeronautics and Astronautics

Pattern

1. Start with single extrude

Women in Aeronautics and Astronautics

Pattern

2. Specify pattern repetitions

Women in Aeronautics and Astronautics

Revolve:

Women in Aeronautics and Astronautics

Assemblies:

Start by placing component at Absolute CS

Women in Aeronautics and Astronautics

Place next component at “Absolute Displayed

Part” location, then drag to the side, or use Snap.

Assemblies:

Choose “Constrain” under Placement and use

Touch Align to place component

Women in Aeronautics and Astronautics

QUESTIONS?

WIAAterps@gmail.com

mmarcus2@umd.edu

lpaquin@umd.edu

madams87@umd.edu

References

https://www.nasa.gov/pdf/466712main_AP_ED_Spacecraft.pdf

http://www.ninfinger.org/models/scaleroc/Mercury%20escape-tower%20tests/capsule%20shapes%2001.jpg

http://oneaviation.aero/eclipse/specifications.php

https://www.zdnet.com/pictures/nasa-set-to-go-commercial-with-spacex/7/