introducing: genepak used oil recycling kit for diesel engines
Post on 09-Jul-2015
409 Views
Preview:
TRANSCRIPT
The GenePakThe flagship product of
Geneco International
Introducing...
The GenePak is an innovative development using modern technology
The GenePak lets diesel engines
run on 100% waste oil.(any petrol-based used oil)
Waste oil is a source of fuel that is more andmore being considered as an importantalternative to costly diesel oil.
How The GenePak Works
A simple conversion is necessary to to run a
diesel engine on 100% used oil
We’re pleased to announce
that the GenePak is the first-ever conversion kit of its kind
to achieve this.
The conversion typically begins with installation of a reserve tank intended for diesel fuel.
Running on diesel remains an option after
installation of the GenePak.
Your primary tank is now
used to hold waste oil.
Your new fuel
How it works
The GenePak is then attached.
Several connections are made, and thediesel engine is ready to run on 100%waste oil.
Your engine will start on the diesel in your reserve tank, thenswitch to used oil once the engine is at operating temperature.
Used oil can be delivered to your location by one of the many oilcollection companies for approximately 1/10 the cost of diesel fuel.
How it works
If you’re interested in delving a bit deeperinto what makes the GenePak work…
It actually works like this…
How it works
A high-performance fuel pump, like the one pictured here, delivers used oil from the large tank
How it works
… to the filter pack … (in sets of 2)
The unique filter design is a
key component of the GenePak.
Only Genuine
Geneco filters
can be used.
How it works
How it works
Geneco filters employ recently-developed technology to remove ultra-fine particles without clogging. Until recently, this would have been impossible. This feature sets us apart and makes the GenePak possible.
Particles above 3 microns are filtered out of the used oil (many types of used oils, such as hydraulic oil, will work in the GenePak).
The filter renders a product more pure than diesel fuel, which translates directly into lower emissions and longer life of your engine’s components.
The oil is pumped into the collection reservoirwhich analyzes the condition of thefilters, and determines if filters are beginningto clog.
Genuine Geneco fuel filters are rated for a minimum three months atnormal usage of the application. Filters are configured in pairs. Thenumber of pairs required varies with the flow. See our flow tables todetermine your filter configuration.
How it works
Next, the fuel is heated using a high-performance fuel heater.
Used oil has a higher viscosity (thickness) than diesel. Raising the temperature of the filtered oil is necessary to achieve the correct viscosity and ensure proper ignition in the combustion chamber.
It is a common practice to heat diesel fuel in cold weather applications and when running vegetable oil.
How it works
A solid-state control module performs several basic functions.
➔ Controls fuel pump➔ Controls fuel heater➔ Controls flow valves➔ Measures performance of filter. ➔ Sends 3 levels of warnings via
SMS when filter needs changing.➔ Reports status codes via SMS➔ Automated switching between oil
and diesel fuel
How it works
Fuel Heater
Collection Reservoir
Genuine Geneco Filters
Control Module
Fuel Pump
Used oil tank
Diesel Powerplant
GenePak Components
Genuine Geneco filters are the key to the GenePak.
We’re building a list of sites where a GenePak is quietly working to savecustomers huge amounts on their fuel bill. Recycling used oil helps theenvironment and gives you peace of mind -- while you save money.
… it’s a win-win for everyone!
That’s how it works!
Each GenePak is a
waste oil recycling plant
because of this
application of technology.
Fuel Savings Potential
• It’s easy to determine your savings with the GenePak.
Simply divide what you spend on diesel by a factor of 10.
• We know that sounds simple, but that’s the averageprice used oil delivered to your home or business in thedeveloped world.
• In remote locations, you may experience more difficulty finding asteady supply of used oil.
Fuel Savings Potential
So, let’s say that you had a diesel generator that looks like this
Silent Type Cummins Diesel Generator Set (50KW-200KW)
Fuel Savings Potential
Just under the bonnet, you would expect to find a QSB7 6.7 cubic litre (408 ci) 6-cylinder inline Cummins diesel engine such as the one pictured here.
Fuel Savings Potential
You’d be generating up to 174kWm (kilowatts per minute)
– enough to serve a small African community.
In America, the average home uses 11,280 kWh per year, making the daily average 31kW, with demand of 2kWm.
Unless the homes are peaking at the same time, this device would conceivably service around 75 homes.
Fuel Savings Potential
A quick look at the spec sheet for the QSB7 and we can see that if we generate an average of 75% prime power (114kW) for a duration of 10 hours per day for 30 days, we would expect to burn 2,400 gallons of diesel fuel. (10 x 30 x 8.0)
Fuel Savings Potential
• In this example, you generated energy for 75 homes for one month and burned 2400 gallons of diesel which cost about $ 3.36 per gallon.
• Your total diesel fuel bill was: $ 8,071
• With the GenePak installed on your diesel equipment, you’d pay about $800 (assumes used oil at $0.33 per gallon)
• Savings: $7,271
• In this example, one month of power savings was more than the cost of your GenePak – and you still have two months before a filter change!
Please visit The Geneco International Web Site
You may inquire about purchasing a GenePak, order
parts, genuine Geneco filters, and learn about our campaign to
help Africa go GREEN with the GenePak.
top related