irriis simcip demo (version 0.8- may 2009) irriis european project – antonio di pietro – enea

Post on 20-Jan-2016

216 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

IRRIIS

SimCIP Demo (version 0.8- May 2009)

IRRIIS European Project – www.irriis.org

Antonio Di Pietro – ENEA

IRRIIS

1. SimCIP is a deterministic, discrete-time simulation model used to study interdependencies between CIs (Telco and electric CI).

2. Visualization of an interactive map containing the component of the considered CI which are real time updated in order to show the state of each component.

3. Insert failure scenarios chosen by the experimenter to assess the propagation of failures between two differtent Cis.

4. Interface with the electric simulator “Sincal” (Siemens) and visualization of the components (bus bar, trasformers, electrical lines, etc.) of an electrical network.

SimCIP features

IRRIIS

How the environment works

Siemens Sincal(Continuos Electrical Simulator)

(1) loading a scenario (2) setting the failures to be simulated (3) starting a simulation

(4) SimCIP performs routing calculations and gets results.

(4) SimCIP interacts with Sincal simulator and gets results.

(5) Simulation results are stored

for results analisys

EXPERIMENTER

Routing algorithm

(Telecom Simulator)

SimCIPDiscrete Event

Simulator

IRRIIS

Creating SimCIP models

From scratch Importing from the networks database

IRRIIS

SimCIP model and simulations settings

Scada panel Power simulator

– SINCAL

Telco simulator– Routing algorithms

Interface networks database

IRRIIS

Geo-view

12

3

4

IRRIIS

Creating scenarios

Scenario agent Scheduling events

IRRIIS

SCADA

IRRIIS

Simulation modes

IRRIIS

Agent-icons in SimCIP

TelcoPower

IRRIIS

An overview on the networks modeled into

SimCIP

IRRIIS

The electrical network as modeled into SimCIP

One 150 kv distribution area

IRRIISIn feeder 2

In feeder 1

In feeder 3

Three infeeder points where the power is being absorbed from the external

transmission network

The electrical network as modeled into SimCIP

IRRIISIn feeder 2

In feeder 1

In feeder 3

A set of critical lines serving the infeeder points

The electrical network as modeled into SimCIP

IRRIIS

Two 20 kV distribution

areas

Area 1serving a Backbone Exchange Telco

node (National Node)

Area 2serving a Transit Telco node

(Local Node)

The electrical network as modeled into SimCIP

IRRIIS

Monitoring electrical areas degradation states on MIT RE panels

Two 20 kV distribution

areas

MVA_1

MVA_2

IRRIIS

The electrical and telecom networks

The PSTN and GSM Telecom networks have critical dependencies with power loads services from the two electrical 20 kV areas

TelcoOffice24

TelcoOffice07

IRRIIS

A demo experiment

OBJECTIVE: showing how the propagation of failures happens

at different time steps.

IRRIIS

STEP 0: Network in normal condition

IRRIIS

STEP 1: Some critical line tripped

Failure of a line and consequent overloading condition producing the disconnection of three critical lines.

IRRIIS

STEP 1: Some critical line tripped

Failure of a line and consequent overloading condition producing the disconnection of three critical lines.

IRRIIS

STEP 2: Critical lines are in overload condition

L7 highly overloaded

General under voltage condition of the two 20 kV

areasMVA2

MVA1

The disconnection of L7 might cause a cascading failure on the overall network.

IRRIIS

STEP 3: The overloaded line tripped

The undervoltage

condition increases in the 150 kV

and also in the two 20 kV

areas.

MVA_2

MVA_1

Telecom BoB devices will be

powered by batteries

TelcoOffice24

OTHER LINES ARE AUTOMATICALLY DISCONNECTED IN A SHORT TIME. A CASCADING EFFECT WILL BE GENERATED FAST.

IRRIIS

The power of backup batteries

expires,

with high

consequence against

the national

communication

system and the

operativity of electrical

SCADA components

STEP 4: Backup batteries of Telco site expire

GENERAL BLACK-OUTFOR THE ELECTRICAL AND FOR THE SCADA

NETWORK.

IRRIIS

STEP 4: General outage on the electrical area

GENERAL BLACK-OUTFOR THE ELECTRICAL AND FOR THE SCADA

NETWORK.

IRRIIS

Thanks for your attention.

Any question?

top related