isuzu_transtrom_read_wr.pdf

8/18/2019 Isuzu_transtrom_READ_WR.pdf

1/4

Connect as below:

Serial Suite: ECU Plug:

Red  to 1 Pins Red (Power Supply +12 Volt)Black to 1 Pins Black (Ground)

Piasiniengineering info@piasinienginnering.it – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298

mailto:info@piasinienginnering.ithttp://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:info@piasinienginnering.it

8/18/2019 Isuzu_transtrom_READ_WR.pdf

2/4

Where to connect the flat cable: 

Backside:

Piasiniengineering info@piasinienginnering.it – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298

mailto:info@piasinienginnering.ithttp://www.piasiniengineering.it/http://www.piasiniengineering.it/mailto:info@piasinienginnering.it

8/18/2019 Isuzu_transtrom_READ_WR.pdf

3/4

8/18/2019 Isuzu_transtrom_READ_WR.pdf

4/4

WRITE the ECU:Front

For write the ECU put 1 capacitor(1uF) and connect the flat cable following thenumber in the picture.

Back

For write the ECU put 1 wire(bridge) and connect the flat cable following the numberin the picture.

Piasiniengineering info@piasinienginnering.it – http://www.piasiniengineering.it Tel: +39 0342 489060 - Fax: +39 0342 488298