jost's racking system is a perfect storage solution for all items

Product

Sectional Details

Stages of Component Formation

Manufacturing Capabilities

Call : 1800 274 5661 Visit: www.josts.com

Racking Systems

PRODUCTS

Medium Duty Racking

Multi-Tier Racking

Textile Racking

Mezzanine Racking

Cantilever Racking

Light Duty Racking

Heavy Duty Racking

Drive-In-Jorack

Call : 1800 274 5661 Visit: www.josts.com

Slotted Angle Racking

Versatile storage of variety of products.

Easily installable and convenient to use.

We can provide multi tier slotted angle system with catwalks.

Available in various dimensions.

Call : 1800 274 5661 Visit: www.josts.com

Heavy & Medium Duty Racking

Racking includes palletized storage as well as shelf storage.

Major components are upright, beam, bracings, foot plate, decking panel.

Call : 1800 274 5661 Visit: www.josts.com

Cantilever Racking System

Customize solution for Rolls Storage.

Easily installable and convenient to use .

Available in various dimensions.

Call : 1800 274 5661 Visit: www.josts.com

Drive-In-Racking system

High compact storage is possible in drive-in racking where the space is limited.

Drive-in and drive-through systems can be provide by us.

Call : 1800 274 5661 Visit: www.josts.com

Mezzanine Floor Racking System

Very suitable where the space is less.

We can provide multi-tier mezzanine systems

Mezzanine systems are designed according to load per square meter on mezzanine.

Call : 1800 274 5661 Visit: www.josts.com

Call : 1800 274 5661 Visit: www.josts.com

Medium Duty Upright

Our Medium duty upright is 6 bend roll formed section, powder coated finish, available in the range of 1.6, 2 and 2.4 mm thk.

Loading level can be Adjusted in the pitch of 85mm.

Call : 1800 274 5661 Visit: www.josts.com

Heavy Duty Upright

Our Heavy duty upright is 12 bend roll formed section, powder coated finish, available in the range of 1.6, 2 and 2.4 mm thk.

Loading level can be Adjusted in the pitch of 85mm.

100

80

Call : 1800 274 5661 Visit: www.josts.com

Heavy Duty Beam

Our Heavy duty beam is a roll formed Box section.

Beams available with the end connectors which gives the versatility of varying the heights.

Ends of the beam is provided with 3 & 4 lips and two bolts to ensure rigidity.

“X” dimension vary depends upon the load

Call : 1800 274 5661 Visit: www.josts.com

Medium Duty Beam

50

X

Our medium duty beam is a roll formed sigma section.

Beams available with the end connectors which gives the versatility of varying the heights.

Ends of the beam is provided with 3 lips and two bolts to ensure rigidity.

“X” Dimensions vary depends on the load.

Call : 1800 274 5661 Visit: www.josts.com

Standard Accessories

Bracing

Decking panel

Base Plate

Call : 1800 274 5661 Visit: www.josts.com

Brace Details

HORIZONTAL BRACE

DIAGONAL BRACE

BRACES 30 x 30 x 1.6 thk are FIXED WITH UPRIGHT FASTENERS M8 X 75

UPRIGHT

Call : 1800 274 5661 Visit: www.josts.com

Standard Accessories

Call : 1800 274 5661 Visit: www.josts.com

Basic Components Details

1

3

5

4

6

ELEVATION DOUBLE FACE SIDEVIEW

SINGLE FACE SIDEVIEW

UPRIGHT1

2 BEAM

3

4

BASE PLATE

HORIZONTAL BRACE

DIAGONAL BRACE

5

56

7

ROW CONNECTOR

AISLE CONNECTOR

7

Call : 1800 274 5661 Visit: www.josts.com

Stages of Components Formation

Material properties verification

Punching, Roll forming, Cutting, welding

Cleaning (7 stage)Degrease, Derust, Zinc Phosphate, Passivation

Powder coating

Visual Inspection

Packing

Raw material

Call : 1800 274 5661 Visit: www.josts.com

Raw Material

Raw material for our variety of products are obtained from the leading industries like,

1. TATA steel

2. SAIL

3. ISPAT

4. ESSAR

5. JINDAL

Material Of Construction – ST42

Call : 1800 274 5661 Visit: www.josts.com

Roll Forming

1. After the verification of the material properties, sheet metal is roll formed to get the required structure.

2. Roll forming ensures no residual stresses, dimensional accuracy and precision.

1. Roll formed structures will be subjected to 7 stage cleaning process which removes oil, water and other impurities.

1. Degrease

2. Cold Water Rinse

3. De-rust

4. Cold Water Rinse

5. Zinc phosphatizing

6. Cold Water Rinse

7. Passivation

2. Then structures are powder coated which ensures non rusting at critical moisture conditions.

Powder Coating

Call : 1800 274 5661 Visit: www.josts.com

Manufacturing Capabilities

1. We can produce single continuous upright of 17.5m.

1. Galvanized – 17.5m

2. Powder coated – 12m

2. We can produce single continuous Beam of 5m.

3. We can Produce Galvanized racks.

4. Powder coating process with 7 tank cleaning

5. Then final finishing of the component is powder coated, done through automated, with electro-static spray, to attain uniform finish.

6. Upright and beam are designed with guidelines given in Indian standard IS 801:1975 code of practice for use of cold formed light gauge steel structural member in general construction.

Call : 1800 274 5661 Visit: www.josts.com

Procedure to select upright section

Upright design for given loading conditions depends on the following,

Load per level

Number of levels

Upright height or system height

Un supported length

Load per upright can be calculated from the above inputs

Beams are selected according to the load per level.

Racking isle is decided based on MHE being used.

Parameters required for designing racking system are stated in

“ENQUIRY COLLECTION FORM”

Call : 1800 274 5661 Visit: www.josts.com

Date: Enquiry Received On:

To From:

Josts Engg.Co.Ltd Mr.:

Thane.

ENQUIRY COLLECTION FORM

Jorack – HEAVY DUTY RACKING SYSTEM

Company Name -

Address -

Phone & Fax Nos -

E_Mail ID

Contact Person

Type Of Industry -

MATERIAL TO BE STORED

Palletized Non Palletized Both

For Palletized Load

Type Of Pallets-Reversible/Non-Reversible (Kindly tick mark in the attached sheet.)

Pallet Size - Fork Entry (W) x Depth (D) x Pallet Height (H)

(W) x (D) x (H)

Pallet Size With Load - Fork Entry (W) x Depth (D) x Pallet Height (H)

(W) x (D) x (H)

Type Of Load – Distributed

Carton Boxes – Size

Bags – Size

Drums – Size

Other – Size

Max Weight Of Each Pallet –

Layout Sketch -

Mark Area in which Racking is Requires

Indicate Door Size & Material Movement.

Type of flooring & Ceiling Height

Check all dimensions are given in drawing (Pillar / Column Size

Pillar to Pillar, Wall to Wall, Door Dimensions etc.)

Equipment – Existing / New

Details Of Existing Equipment – Aisle Width / Straddle Width etc.

Kindly Indicate Any Accessories Required

Column Guard Shelf Panels / Pallet Support Bar

Any Other Skid Channel / Fork Spacer / Drum Cradle

Attach

1. Drawing of Warehouse – Ask for AutoCAD Drawing .

2. Rough sketch of products with dimension.

3. Sketch of existing racks (for similar requirement)

4. List of Materials, Sizes, Weight (for multi product storage)

23

Jost’s Engineering Company Limited

• 1800 274 5661 / +91 779 888 1701

• marketing@josts.in / salespune@josts.in

• www.josts.com

Contact Us – 1800 274 5661

Call : 1800 274 5661 Visit: www.josts.com