jpx03-sto-128b_en alias dslam merk huawei
Post on 09-Apr-2018
233 Views
Preview:
TRANSCRIPT
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 1/6
October, 2006
HUAWEI TECHNOLOGIES
JPX03-STO-128B Exchange Side
Terminal Block
HUAWEI TECHNOLOGIES CO., LTD.
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 2/6
JPX03-STO-128B Exchange Side Terminal
Block
JPX03-STO-128B exchange side terminal block is designed for indoor application, which
is used in MDF for internal lines termination and jumpers connection, in addition, lines
test and disconnection can be implement on the exchange side terminal block by using
test plug and open-circuit plug.
Reference standard: YD/T694-2004 Main Distribution Frame .
Capacity: 128 pairs/block, 8 pairs/strip;
Dimensions:H×W×D=107x235x126.6m
m;
Compact horizontal installation terminal
block;
IDC connection type;
Full front access, upside and underside
cabling;
Test plug and open-circuit plug are
equipped for line test and
disconnection;
Different cables have independent
cabling area, and each cable has
independent identification;
Applicable wire:
the diameter of conductor is
0.32~0.6mm;
the maximum outside diameter
(insulation layer included) is no more
than 1.4mm.
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 3/6
Terminal St rip and Cabling-Guide board
Terminal Strip
Capacity : 8 pairs / strip;
2 wires can be terminated on each IDC
multiple-connection slot;
Cabling-Guide Board
Symmetry structure of cabling-guide
board with PVC parting-film between
tow layers;
Dimensions of guide-holes:
HxW=2.4x2.4mm.
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 4/6
Installat ion of JPX03-STO-128B
Installation steps:
1. Loose M6 bolt of pressure plate moderately, and rotate the pressure plate;
2. Place JPX03-STO-128B terminal block at the desired position on installation
bar , and rotate the pressure plate to hold down the installation bar;
3. Adjust JPX03-STO-128B terminal block to required position along installation
bar, and screw down M6 bolt to fasten the pressure plate.
Def init ion of Cabling Order
Subscribers’ LINE jumpers cabling on the
upside of JPX03-STO-128B terminal
block;
PSTN narrowband cables cabling on the
underside of JPX03-STO-128B terminal
block.
Installation bar
M6 bolt
Pressure plate
PSTN
LINE
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 5/6
IDC tool
IDC tool is used to terminate each wire into IDC connection slot. After wires are inserted
into the corresponding termination slot, the wire-cutter will operate to cut off the extra wire
ends.
Used for cable connection;
Insulation Displacement Connection
tool with wire-cutting device;
For wires termination and pulling out
from contact elements;
It can automatically cut redundant
ends after wires terminated;
There is a hook convenient for wire
removing.
8/7/2019 jpx03-sto-128b_en alias DSLAM merk huawei
http://slidepdf.com/reader/full/jpx03-sto-128ben-alias-dslam-merk-huawei 6/6
Huawei Technologies Co., Ltd
Add: Bantian, Longgang District. Shenzhen 518129, China
Telepone: +86-0755-28780808
Website:http://www.huawei.com
top related