katalog selbstbohr hohlstab system de en anp
Post on 14-Aug-2015
77 Views
Preview:
DESCRIPTION
TRANSCRIPT
ANP Selbstbohr Hohlstab SystemANP selfdrilling hollowbar System
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 1 / Page 1
Zubehör / accessoriesANP-SHS / ANP-SHS
Typ / type [mm] R 32 R 32 R 32 R 32 R 38 R 51 R 51 T 76 T 76 T 76
Kennwert /
parameter
H 0210-32
H0250-32
H0280-32
H0360-32
H0500-38
H0630-51
H0800-51
H1380-76
H *1600-76
H *1900-76
da [mm] 31,3 31,3 31,3 31,3 38 51 51 76 76 76
di [mm] 20 18 16,5 14 18,5 31,5 29,5 53,5 51,5 46
p [mm] 12,7 12,7 12,7 12,7 12,7 12,7 12,7 6,35 6,35 6,35
Fyk (F0,2k) [kN] 170 190 230 280 400 510 630 1075 1200 1500
Ftk [kN] 210 250 280 360 500 630 800 1380 1600 1900
ANP Selbstbohr Hohlstab System (SHS)ANP selfdrilling hollowbar system (SHS)
Rundgewinde R 32 - 51 mm
kaltgerollt - linksgängig
round thread R 32 - 51 mm
cold rolled - left hand thread
R-Gewinde 32 - 38 mm nach ISO 10208 / R-thread 32 - 38 mm according to ISO 10208
R-Gewinde 51 mm nach Werksnorm / R-thread 51 mm according to factory standard
T-Gewinde 76 mmnach Werksnorm / T-thread 76 mm according to factory standard
* auf Anfrage verfügbar / available on request
Trapezgewinde T 76 mm
kaltgerollt - rechtsgängig
trapezoidal thread T 76 mm
cold rolled - right hand thread
Kalottenplatte dome plate
Pfahlkopfplatte, geradepile head plate, flat
Zentrierabstandhalter, PEspacer, PE
Kugelbundmutter, 55° dome nut, 55°
Sechskantmutter, gerade, ballighex nut ,flat, bull nose
Kupplungcoupler
Typ / type
[mm]
Kennwert/
parameter
H 2001 - H 2963 - H 3003-
SW x d x L [mm] [kg] SW x L [mm] [kg] d x L [mm] [kg]
32 H0210-32 46 x 60 x 46 0,45 46 x 45 0,40 42 x 125 0,70
32 H0250-32 46 x 60 x 46 0,45 46 x 45 0,40 42 x 125 0,70
32 H0280-32 46 x 60 x 46 0,45 46 x 45 0,40 42 x 125 0,70
32 H0360-32 46 x 60 x 46 0,45 46 x 45 0,40 42 x 125 0,70
38 H0500-38 55 x 70 x 55* 0,60 50 x 50 0,60 51 x 163 1,30
51 H0630-51 75 x 90 x 70* 1,60 75 x 70 1,60 63 x 180 1,80
51 H0800-51 75 x 90 x 70* 1,60 75 x 70 1,60 63 x 180 1,80
76 H1380-76 100 x 120 x 90 3,25 100 x 80 2,95 101 x 200 5,50
76 H1600-76 100 x 120 x 90 3,25 100 x 80 2,95 101 x 200 5,50
76 H1900-76 100 x 120 x 90 3,25 100 x 80 2,95 100 x 200 5,50
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 2 / Page 2
Zubehör / accessories
Typ / type
[mm]
Kennwert/
parameter
Hac - Hac - H 5085 -
a x c x d [mm] [kg] a x c x d [mm] [kg] da x di x L [mm] [kg]
32 H0210-32 150 x 8 x 35 1,40 - - 70 x 32 x 25 0,035
32 H0250-32 200 x10 x 35 3,10 - - - -
32 H0360-32 200 x12 x 35 3,70 - - - -
32 H0280-32 200 x 10 x 35 3,10 - - - -
38 H0500-38 200 x 12 x 41 3,60 - - 90 x 38,5 x 25 0,045
51 H0630-51 225 x 15 x 53* 5,70 200 x 30 x 56 8,8 110 x 50,5 x 25 0,050
51 H0800-51 250 x 18 x 53* 8,50 250 x 40 x 56 18,5 - -
76 H1380-76 - - 250 x 40 x 80 26,9 136,5 x 78 x 50 0,1
76 H1600-76 - - - - - -
76 H1900-76 - - - - - -
* auf Anfrage verfügbar / available on request
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 3 / Page 3
Zubehör / accessories
Typ / type
[mm]
EC Typ / type
[mm]
ECC Typ / type
[mm]
EY-DC
d [mm]
[kg]
d [mm] [kg] d [mm] [kg]
32 51 0,35 32 51 0,35 32 76 1,00
38 - - 38 - - 38 76 0,90
51 115 2,30 - - - 38 90 1,10
Typ / type
[mm]
EYY-DC Typ / type
[mm]
ES Typ / type
[mm]
ESS
d [mm]
[kg]
d [mm] [kg] d [mm] [kg]
32 76 1,00 32 51 0,50 32 51 0,50
38 76 0,90 38 76 1,20 38 76 1,20
38 90 1,10 38 90 1,70 38 90 1,70
- - - 51 100 1,80 51 90 1,80
- - - 51 115 2,00 51 100 3,00
- - - 76 170 6,00 51 115 3,60
- - - - - - 51 150 4,50
- - - - - - 76 180 6,00
Bogenbohrkrone, gehärtet ECarc-shaped drill bit EC
Bogenbogenbohrkrone, mit Hartmetalle-nisätzen ECC
drill bit, with TC inserts ECC
Bogenbohrkrone, mit dropcenter EY-DChardened cross drill bit EY-DC
Bogenbohrkrone, mitHartmetalleinsätzen dropcenter EYY-DC
cross drill bit, with TC inserts EYY-DC
Stiftbohrkrone, gehärtet EShardened button bit ES
Karbid-Stiftbohrkrone, ESSbutton bit with TC inserts ESS
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 4 / Page 4
Typ / type
[mm]
EX Typ / type
[mm]
EXX Typ / type
[mm]
ES-DC
d [mm]
[kg]
d [mm] [kg] d [mm] [kg]
32 51 0,40 32 51 0,84 51 115 2,00
38 76 1,20 38 76 1,30 - - -
51 76 1,20 51 76 1,40 - - -
76 130 6,00 - - - - - -
Typ / type
[mm]
ESS-DC Typ / type
[mm]
CB Typ / type
[mm]
H 4901-38
H 4901-51
d [mm]
[kg]
d [mm] [kg] d [mm] [kg]
51 115 2,00 32 76 0,50 38 / 32 40 0,10
- - - 32 90 1,00 51 / 38 45 0,30
- - - 32 100 1,20 - - -
- - - 38 90 0,90 - - -
- - - 38 110 1,30 - - -
- - - 51 130 1,90 - - -
- - - 51 150 2,80 - - -
- - - 76 130 3,50 - - -
- - - 76 175 5,10 - - -
Zubehör / accessories
Kreuzbohrkrone, gehärtet EXcross bit EX
Kreuzbohrkrone, mit Hartmetalleinsätzen EXXcross bit, with TC inserts EXX
Stiftbohrkrone, mit dropcenter ES-DC hardened button bit, with dropcenter ES-DC
Stiftbohrkrone, mit Hartmetalleinsätzen dropcenter ESS-DC
button bit, with TC inserts dropcenter ESS-DC
Lehmbohrkroneclay bit
Reduktionsadapterdrill bit adapter
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 5 / Page 5
Zubehör / accessories
Typ / type
[mm]
Kennwert/
parameter
Typ / type
[mm]
di x da x L
[mm]
[kg] di x da x L
[mm]
[kg]
- Spülwelle 61 62 x 69 x 114 2,4 - 61 x 69 x 7 0,01
- Spülwelle 75 76 x 108 x 180 4,1 - 75 x 90 x 10 0,01
- Spülwelle 100 101 x 135 x 180 6,2 - 100 x 120 x 12 0,04
Spül- und Injektionskopf (mit Schlauchanschluß, Schmiermittel und Befestigungslasche)
grouting and flushing head
Dichtung (4 Stück je Spülkopf)sealing (4 pcs. per head)
Spülwelle 61 flushing shaft 61
Spülwelle 75flushing shaft 75
Spülwelle 100flushing shaft 100
Typ / type
[mm]
Typ / type
[mm]
Typ / type
[mm]
Gewinde A** x L x SW
[mm]
[kg]
Gewinde A** x L x SW
[mm]
[kg] Gewinde A** x L x SW
[mm]
[kg]
32 T 45 x 229 x 60 4,60 32 R 38 x 300 x 65 8,10 38 H 55 x 305 x 80 14,0
32 R 38 x 229 x 60 4,60 32 T 45 x 300 x 65 8,10 38 H 64 x 305 x 90 13,7
32 R 32 x 229 x 60 4,60 32 R 51 x 300 x 65 7,80 51 H 55 x 305 x 80 13,8
38 T 45 x 229 x 60 4,40 38 R 38 x 300 x 65 8,10 51 H 64 x 305 x 90 13,5
38 R 38 x 229 x 60 4,40 38 T 45 x 300 x 65 7,90 76 H 55 x 305 x 80 -
38 R 32 x 229 x 60 4,60 38 R 51 x 300 x 65 7,70 76 H64 x 305 x 90 -
** hammerseitiges linksgängiges Gewinde (rechtsgängiges Gewinde auf Anfrage) / hammer site, left hand thread (right hand thread on request)
* Gewindeanschluß verfügbar für 1", 1 1/2" und 2" / thread joint available for 1“, 1 1/2“ and 2“
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 6 / Page 6
Referenzprojekt / reference project
TANZENDE TÜRME, GERMANY
Projekt: ÖBB, Bahnhof Laßnitzhöhe, Österreich
Project: ÖBB, railway station Laßnitzhöhe, Austria
Bauherr: ÖBBOwner: ÖBB (austrian railway)
Auftragnehmer: Bauunternehmung Granit GmbHMain contractor: Bauunternehmung Granit GmbH
Ausführungszeitraum: Frühling 2010Construction period: spring 2010
Gesamtmenge: 500 m2 Spritzbeton Stärke 20 cm, bewehrt. SHS H0280-32, Total quantity: BL 260 KN: ca. 110 Stk. a 8 m und ca. 20 Stk. a 10 m 500 m2 reinforced shot crete walls, 20 cm thickness. SHS H0280-32, 110 pcs. of 8 m and 20 pcs. of 10 m length
Leistungsumfang:Scope of works:
Herstellung einer neuen Bahnunterführung. Die Sicherungsmaßnahmen dienten der Böschungssicherung unterhalb der Behelfsbrücke während der Herstellung der neuen Unterführung. Die Sicherungsarbeiten wurden in mehreren horizon-talen, sowie auch in mehreren vertikalen Abschnitten hergestellt, um möglichst kleine ungesicherte Böschungsflächen unter der befahrene Behelfsbrücke zu ha-ben. D.h. je Horizont wurde zuerst nur jeder 2. Block geöffnet und gesichert. Erst am nächsten Tag wurden die “fehlenden Blöcke” sicherungstechnisch ergänzt.
Construction of a new railway underpass. The protective measure secured the slopes in the vicinity of the abutments of the temporary bridge during the construc-tion of the new underpass. Work were carried out in several horizontal and vertical sections to minimize unsecured areas. This means that alternating blocks were excavated and secures on consecutive days.
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 7 / Page 7
S 555/700 ∅ 63,5 mm / grade 80
Referenzprojekt / reference project
Projekt: L 233, Oberperferer Straße, Ausbau Sellrain Gasse, Österreich
Project: L 233, Oberperferer road, widening of Sellrain road, Austria
Bauherr: Land Tirol, LandesstraßenverwaltungOwner: Land Tirol, Landesstraßenverwaltung
Auftragnehmer: STRABAG AG, Direktion Af-VerkehrswegebauMain contractor: STRABAG AG, Direktion Af-Verkehrswegebau
Ausführungszeitraum: August 2011 - Dezember 2012Construction period: August 2011 - December 2012
Gesamtmenge: SHS H0500-38, 2 500 lfm, SHS H0800-51, 9 000 lfmTotal quantity: SHS H0500-38, 2 500 lfm, SHS H0800-51, 9 000 lfm
Leistungsumfang:Scope of works:
Straßenverbreitung der Oberperferer Straße L 233.
Widening of Oberperferer road L 233.
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 8 / Page 8
S 555/700 ∅ 63,5 mm / grade 80
Referenzprojekt / reference
S 555/700 ∅ 63,5 mm / grade 80
Projekt: B169 Schluchtstrecke Ginzling, Baulos 6, Österreich
Project: B169 Road through Ginzling - gorge, section 6, Austria
Bauherr: Amt der Tiroler LandesregierungOwner: Amt der Tiroler Landesregierung
Auftragnehmer: Held & Francke Baugesellschaft mbHMain contractor: Held & Francke Baugesellschaft mbH
Ausführungszeitraum: August 2010 - Juli 2011Construction period: August 2010 - July 2011
Gesamtmenge: SHS H0360-32, 638 Stk. / 2767 lfm, SHS H0800-51, 357 Stk. / 2980 lfmTotal quantity: SHS H0360-32, 638 pcs. / 2767 lfm, SHS H0800-51, 357 pcs. / 2980 lfm
Leistungsumfang:Scope of works:
Talseitige Straßenverbreiterung durch 4 Hangbrücken und 4 Stützmauern. Verb-reiterung der bestehenden Zemmbachbrücke, gegründet auf Mikropfählen. Berg-seitige Straßenverbreiterung mittels Hanganschnitte, gesichert durch dauerhafte Spritzbetonnagelwände mit Steinvermauerung.
Widening of road by means of four slope bridges and 4 retaining walls. Broaden-ing of the existing “Zembach” bridge, fouded on Micro piles. Widening of road by means of slope cuts, secured by shotcrete walls with permanent soil nails and natural stone cladding.
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 9 / Page 9
S 555/700 ∅ 63,5 mm / grade 80
Referenzprojekt / reference
S 555/700 ∅ 63,5 mm / grade 80
Projekt: ÖBB, Bahnhof Lend, Österreich
Project: ÖBB, railway station Lend, Austria
Bauherr: ÖBBOwner: ÖBB (austrian railway)
Auftragnehmer: GK-Construction GmbHMain contractor: GK-Construction GmbH
Ausführungszeitraum: März 2011Construction period: March 2011
Gesamtmenge: SHS H0280-32, 26 Stk. = 134 lfm / SHS H0500-38, 98 Stk. = 532 lfmTotal quantity: SHS H0280-32, 26 pcs. = 134 lfm / SHS H0500-38, 98 pcs. = 532 lfm
Leistungsumfang:Scope of works:
Umbau/Neubau des Bahnhofes Lend, insbesondere der Bahnsteige inkl. unterir-dischem Zugangstunnel in offener Bauweise mit einer vernagelten SpC-Wand als Baugrubensicherung.
Upgrading of the railway station, in particular of platforms incl. access tunnel, con-structed in an excavation pit protected by shot crete (gunite) walls with temporary soil nails.
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20
info@anp-systems.at • www.anp-systems.at
ANP SHS Katalog/ANP SHS catalogueStand Januar 2012 / updated January 2012Seite 10 / Page 10
S 555/700 ∅ 63,5 mm / grade 80
S 555/700 ∅ 63,5 mm / grade 80
Referenzbilder / reference pictures
Gewindestäbe / threadbars Streckgrenze / Zugfestigkeityield stress / ultimate stress
Anwendungsbereicheareas of application
Strecklastyield load
Bruchlastavultimate load
Flächecross sectionarea
Gewichtweight
Dehnungelongation
[N/mm2] [mm] [kN] [kN] [mm2] [m/to] [kg/m] [%] [%]Agt A10
Nenn.-ønom.-ø
6285
111173270339442691
10801760
7096
125195305381499781
12152215
113154201314491616804
126019603167
0,891,211,582,473,854,836,319,87
15,4024,86
6 10
5
BSt 550 / 620Bewehrungstechnikreinforcing systems
Geotechnikgeotechnical systems
S 670 / 800Geotechnikgeotechnical systems
Ankertechniktunnelling / mining
1822252830354357,563,575
170255329413474645973
174021222960
204304393493565770
1162207725343535
254380491616707962
1452259731674418
500,0335,6259,7207,0180,2132,5
87,749,140,228,8
2,002,983,854,835,557,55
11,4020,3824,8634,68
5 10
12141620252832405063,5S 555 / 700
St 950 / 1050Spanntechnikpost-tensioning systems
St 950 / 1050St 835 / 1035
5 7
5 7
4 7
St 900 / 1100 Type FASchalungstechnikformwork ties Type E
1520
26,5
159283
46 1
195345
568
177314
551
694,4390,6
223,2
1,442,56
4,48
3 7
alternative SAS 550 (BSt 550 S) grade 75 available
Zubehör für alle Abmessungen und Anwendungen erhältlich / accessories for all dimensions and applications available
Technische Änderungen vorbehalten / subject to technical changes
schweißbar weldable
ETAZulassungapproval
neu / new
neu / new
neu / new
1826,532364047576575
230525760960
11901650215527803690
255580845
107013201820267134474572
241551804
102012571735258133314418
510,2223,2153,1120,9
97,970,947,736,927,9
1,964,486,538,27
10,2114,1020,9527,1035,90
1123,6826,4632,9404,9259,7207,0158,5101,3
64,940,2
Geotechnikgeotechnical systems
Ankertechniktunneling / mining
32-21032-25032-28032-36038-53051-63551-80076-138076-160076-1900
170190230280400510630
107512001500
210250280360500630800
138016001900
345383435510727920
1175209022102525
----------
2,73,03,44,05,77,29,2
16,417,319,8
5 10
SAS 900
SAS 950
SAS 670
SAS 550
neu / new
Hohlstab / hollow bar
BMVITZulassungapproval
BMVITZulassungapproval
BMVITZulassungapproval
DIBtZulassungapproval
ANP Systems GmbH, A-5061 Elsbethen / Austria Tel. +43(0)662/253 253-0 • Fax +43(0)662/253 253-20info@anp-systems.at • www.anp-systems.at
top related