kel-dpz 24 cable entry plates21 x 3.2 - 6.5 mm 10 kel-dpz-e is designed for routing standard cables...
Post on 31-Jan-2021
2 Views
Preview:
TRANSCRIPT
-
50 | |
IP65
50
KEL-DPZ 24
Cable entry plates
Product description
KEL-DPZ entry plates are designed to route
and seal standard cables (from 3.2 mm to 22
mm in diameter) in limited space.
Simply push standard cables through the thin
membrane and it’s immediately sealed (IP65 /
IP66) and strain relieved.
The size DPZ 24 matches exactly the cut-out
dimensions of 24-pole standard industrial
connectors.
The assembly of the KEL-DPZ with cables or
pneumatic hoses can be done within seconds.
Simply put a small slit in the thin membrane
and push the cable through.
ST Plugs (page 33) can be used for sealing
pierced membranes if cables are removed.
Description Type Order No. Number of PU
cables
KEL-DPZ 24|14 43700 50700
10× 3.2 - 6.5 mm
4× 16 - 22 mm10
KEL-DPZ 24|15 43720 50720
15× 7.2 - 12 mm 10
KEL-DPZ 24|16 43725 50725
8× 3.2 - 6.5 mm
4× 5.0 - 9.7 mm
2× 9.0 - 16.2 mm
2× 16 - 22 mm
10
KEL-DPZ 24|17 43705 50705
6× 3.2 - 6.5 mm
6× 5.0 - 10.2 mm
5× 9.0 - 16.2 mm
10
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
*Except KEL-DPZ-KL / KEL-DPZ round
KEL-DPZ on request also avail-
able with threaded bushings.*
Membrane on front
-
51 | |
IP65
Speci$ cation
Accessories
Page 33
Page 124 - 129
Plugs
FP Flanged plates
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Frame: Polyamide (PA)
Sealing plate: Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP65
- 40°C to + 90°C (static)
Halogen-free, silicone-free
35 × 112 mm / page 146 - 147
Advantages
Assembly within seconds
High packing density
Dual sealing of cables according to IP65
Automatic seal and strain relief for the cable
TypeOrder
No.Number of PU Description
cables
KEL-DPZ 24
Cable entry plates
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
KEL-DPZ 24|25 43710 50710
12× 3.2 - 6.5 mm
7× 4.8 - 9.7 mm
6× 7.5 - 12.0 mm
10
KEL-DPZ 24|32 43730 50730
3× 7.5 - 12.0 mm
8× 5.0 - 10.2 mm
21x 3.2 - 6.5 mm
10
KEL-DPZ 24|42 43715 50715
42x 3.2 - 6.5 mm 10
KEL-DPZ 24|121 43735 50735
119x 1.5 - 2.6 mm
2× 2.5 - 5.0 mm10
Conical shape on back
provides additional sealing
and strain relief
-
52 | |
72,80
58
32
58
5,70
72,80
58
32
58
5,70
72,80
58
32
58
5,70
IP66
52
KEL-DPZ-B
Cable entry plates
Description Type Order No. Number of PU
cables
KEL-DPZ-B 1343794
50794
8× 3.2 - 6.5 mm
4× 5.0 - 10.2 mm
1× 16 - 22 mm
10
KEL-DPZ-B 1743796
50796
10× 3.2 - 6.5 mm
4× 5.0 - 10.2 mm
2× 7.5 - 12 mm
1× 9.0 - 16.2 mm
10
KEL-DPZ-B 2543798
5079825x 3.2 - 6.5 mm 10
Speci, cation
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Frame: Polyamide (PA)
Sealing plate: Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP66
- 40°C to + 90°C (static)
Halogen-free, silicone-free
46 × 46 mm
Advantages
Space saving shape
Dual sealing of cables according to IP66
High packing density
Assembly within seconds
Product description
The KEL-DPZ-B entry plates are designed for
routing standard cables (without connectors) .
With an area of only 46 × 46 mm, up to
25 cables can be easily routed and sealed
according to IP66.
Simply put a small slit in the thin membrane
and push the cable through. Once the cable
is through the membrane, it is immediately
sealed and strain relieved. ST Plugs (page 33)
can be used for sealing pierced membranes if
cables are removed.
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
Accessories
Page 124 - 129
FP Flanged plates
*Except KEL-DPZ-KL / KEL-DPZ round
KEL-DPZ on request also avail-
able with threaded bushings.*
-
53 | |
130
147
29
5,70
130
147
29
5,70
IP66
KEL-DPZ-E
Cable entry plates
Speci, cation
Advantages
Space saving shape
Dual sealing of cables according to IP66
High packing density
Assembly within seconds
Product description
Description Type Order No. Number of PU
cables
KEL-DPZ-E 112|74378050780 7× 7.5 - 12 mm
10
KEL-DPZ-E 112|214379050790
21x 3.2 - 6.5 mm 10
KEL-DPZ-E is designed for routing standard
cables (without connectors).
With an area of only 18 × 112 mm, up to
21 cables can be easily routed and sealed
according to IP66.
Simply put a small slit in the thin membrane
and push the cable through. Once the cable
is through the membrane, it is immediately
sealed and strain relieved.
ST Plugs (page 33) can be used for sealing
pierced membranes if cables are removed.
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Frame: Polyamide (PA)
Sealing plate: Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP66
- 40°C to + 90°C (static)
Halogen-free, silicone-free
18 × 112 mm / page 146 - 147
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
Membrane on front Conical shape on back
provides additional sealing
and strain relief
-
54 | |
9,5
1
01
1
01
9
,5
72
76
90
4,5
IP65
54 www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
KEL-DPZ-KL
Cable entry plates
Description Type Order No. Number of PU
cables
KEL-DPZ-KL72 43675.001 43675.101
42x 3.2 - 6.5 mm
21x 5.0 - 10.2 mm
6× 9.0 - 16.2 mm
3× 16 - 22 mm
5
Speci, cation
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Support: Steel, molded with
elastomer
Sealing plate: Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP65
- 40°C to + 90°C (static)
Halogen-free, silicone-free
192 × 62 mm
Advantages
Space saving shape
Dual sealing of cables according to IP65
High packing density
Assembly within seconds
Product description
The cable entry plate KEL-DPZ-KL is designed
for routing up to 72 standard cables (without
connectors). The KEL-DPZ products are a cost
saving alternative to traditional cable glands.
Either push the cable through the thin
membrane or simply put a small slit in the
thin membrane and push the cable through.
Once the cable is through the membrane,
it is immediately sealed and strain relieved.
ST Plugs can be used for sealing pierced
membranes if cables are removed.
The KEL-DPZ-KL matches on terminal boxes KL
from Rittal.
Accessories
Page 33Inserts
Membrane on front Conical shape on back
provides additional sealing
and strain relief
-
56 | |
IP68
56
KEL-DPZ round
Cable entry plates
Type Order Number of Thread External Exceeds PU
No. cables metric diameter DA cut-out
KEL-DPZ 32|44373250732
3× 3.2 - 6.5 mm
1× 7.2 - 12.5 mmM 32 44 mm 8.0 mm 10
KEL-DPZ 32|74373450734
7× 3.2 - 6.5 mm M 32 44 mm 8.0 mm 10
KEL-DPZ 40|84374150741
4× 3.2 - 6.5 mm
4× 5.0 - 10.2 mmM 40 52 mm 8.0 mm 10
KEL-DPZ 50|84375050750
5× 5.0 - 10.2 mm
3× 7.2 - 12.5 mmM 50 62 mm 8.0 mm 10
KEL-DPZ 50|104375150751
7× 3.2 - 6.5 mm
2× 5.0 - 10.2 mm
1× 16.0 - 22.2 mm
M 50 62 mm 8.0 mm 10
KEL-DPZ 50|124375250752
4× 3.2 - 6.5 mm
8× 5.0 - 10.2 mmM 50 62 mm 8.0 mm 10
KEL-DPZ 50|194375850758
19× 3.2 - 6.5 mm M 50 62 mm 8.0 mm 10
KEL-DPZ entry plates are designed to route
and seal standard cables (from 3.2 mm to 22
mm in diameter) in limited space.
Simply push standard cables through the thin
membrane and it’s immediately sealed (IP65 /
IP68) and strain relieved.
The round versions of the KEL-DPZ series have
a thread to < t in metric cut-outs from M32 to
M63. Thus cut-outs for standard metric cable
glands can be used.
The assembly of the KEL-DPZ with cables or
pneumatic hoses can be done within seconds.
Simply put a small slit in the thin membrane
and push the cable through.
ST Plugs (page 33) can be used for sealing
pierced membranes if cables are removed.
Product description
Membrane on front
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
Conical shape on back
provides additional sealing
and strain relief
-
57 | |
IP68
Speci$ cation
Page 124 - 129
Page 130 - 131
FP Flanged plates
MP Module plates
Accessories
Thread frame: Polyamide (PA)
Sealing plate: Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP68 (certiM ed according to
DIN EN 60529:2000-09)
- 40°C to + 90°C (static)
Halogen-free, silicone-free
14 mm
Metric standard sizes
Material
Colour
Flame class
Protection class
Temperature
Properties
Thread length
Cut-out dim.
Advantages
Assembly within seconds
High packing density
Dual sealing of cables according IP68
Automatic seal and strain relief for the cable
Suitable for standard or metric cut-outs
Polyamide locknuts are included in the
shipment
KEL-DPZ round
Cable entry plates
Type Order Number of Thread External Exceeds PU
No. cables metric diameter DA cut-out
KEL-DPZ 50|784375650756
76x 1.5 - 2.6 mm
2× 2.5 - 5.0 mmM 50 62 mm 8.0 mm 10
KEL-DPZ 63|94376050760
1× 3.2 - 6.5 mm
3× 5.0 - 10.2 mm
4× 9.0 - 16.2 mm
1× 16.0 - 22.2 mm
M 63 75 mm 8.0 mm 10
KEL-DPZ 63|134376150761
4× 3.2 - 6.5 mm
4× 5.0 - 10.2 mm
5× 9.0 - 16.2 mm
M 63 75 mm 8.0 mm 10
KEL-DPZ 63|354376350763
35x 3.2 - 6.5 mm M 63 75 mm 8.0 mm 10
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
-
58 | |
44
142
44
142
44
142
44
142
44
142
44
142
58
Accessories
Page 124 - 129FP Flanged plates
Speci& cation
Advantages
KEL-DP entry plates are designed for routing
standard cables (without connectors). The
KEL-DP products are a cost saving alternative to
traditional cable glands. Either push the cable
through the thin membrane or simply put a
small slit in the thin membrane and push the
cable through. Once the cable is through the
membrane, it is immediately sealed.
ST Plugs (page 33) can be used for sealing
pierced membranes if cables are removed.
A special = xing rib ensures a centered = t in
the cut-outs.
KEL-DP 24
Cable entry plates
Description Type Order No. Order No. Number of PU
Type A Type B cables
KEL-DP
24|14
43512 50512
4352250522
14× max. 12.1 mm 10
KEL-DP
24|17
43514 50514
4352350523
5× max. 10.5 mm
12× max. 12.6 mm10
KEL-DP
24|19
43516 50516
4352450524
12× max. 6.5 mm
7× max. 12.1 mm10
KEL-DP
24|26
43518 50518
4352550525
16× max. 6.5 mm
4× max. 12.1 mm
4× max. 16.1 mm
2× ASI-Leitungen
10
KEL-DP
24|48
43519 50519
4352650526
48x max. 6.5 mm 10
KEL-DP
24|50
43520 50520
4352750527
33x max. 5.3 mm
9× max. 6.4 mm
8× max. 8.3 mm
10
Fastening
Product description
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Type A:
Type B:
Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP64
- 40°C to + 90°C (static)
Halogen-free, silicone-free
36 × 112 mm
For wall thickness 1.5 - 2.5 mm
For wall thickness 2.8 - 4.0 mm
Quick and easy assembly, no tools required
High packing density
Cost-eG ective
For wall-thickness up to 1.5 - 4.0 mm
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
-
59
62
25
62
25
128
25
128
25
| |
25
102
25
102
78
19,5
0
Material
Colour
Flame class
Protection class
Temperature
Properties
Speci$ cation
Advantages
KEL-DP-E entry plates are designed for routing
standard cables (without connectors).
The KEL-DP-E products are a cost saving alternative
to traditional cable glands. Either push the cable
through the thin membrane or simply put a small
slit in the thin membrane and push the cable
through. Once the cable is through the membrane,
it is immediately sealed.
ST Plugs (page 33) can be used for sealing pierced
membranes if cables are removed. A special ; xing
rib ensures a centered ; t in the cut-outs.
Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP64
- 40°C to + 90°C (static)
Halogen-free, silicone-free
Quick and easy assembly, no tools required
High packing density
Cost-eA ective
For wall-thickness up to 1.5 - 2.5 mm
KEL-DP-E
Cable entry plates
Product description
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
Type Order No. Cut-out Number of PU Description
[mm] cables
KEL-DP-E
46|7
43585
50585 46 × 18
5× max. 8.3 mm
2× max. 6.5 mm10
KEL-DP-E
46|9
43587
50587 46 × 18
8× max. 6.5 mm
1× max. 12.1 mm10
KEL-DP-E
86|13
43581
50581 86 × 18
11× max. 8.3 mm
2× max. 6.5 mm10
KEL-DP-E
86|17
43583
50583 86 × 18
16× max. 6.5 mm
1× max. 12.1 mm10
KEL-DP-E
112|16
43576
50576 112 × 18
4× max. 6.5 mm
11× max. 8.3 mm
1× max. 12.1 mm
10
KEL-DP-E
112|21
43578
50578 112 × 18
16× max. 6.5 mm
4× max. 8.3 mm
1× max. 12.1 mm
10
KEL-DP-S
69|8
43591
50591
69 × 10
Edge radii R28× max. 7.5 mm 10
-
60 | |
IP65
60
Accessories
Page 46
Page 124 - 129
KEL-AD Cap for
attachment housing
FP Flanged plates
Elastomer
grey (similar RAL 7035)
black
UL94-V0, self-extinguishing
IP65
- 40°C to + 90°C (static)
Halogen-free, silicone-free
Metric standard sizes
For wall thickness 1.5 - 2.5 mm
For wall thickness 2.8 - 4.0 mm
Material
Colour
Flame class
Protection class
Temperature
Properties
Cut-out dimensions
Type A:
Type B:
Speci& cation
Quick and easy assembly, no tools required
High packing density
Cost-e? ective
For wall thickness up to 1.5 - 4.0 mm
Advantages
KEL-DP entry plates are designed for routing
standard cables (without connectors). The
KEL-DP products are a cost saving alternative
to traditional cable glands. Either push the ca-
ble through the thin membrane or simply put
a small slit in the thin membrane and push
the cable through. Once the cable is through
the membrane, it is immediately sealed.
ST Plugs (page 33) can be used for sealing
pierced membranes if cables are removed.
A special I xing rib ensures a centered I t in
the cut-outs.
KEL-DP round
Cable entry plates
Type Order No. Order No. Number of Cut-out External PU
Type A Type B cables diameter DA
KEL-DP 25|44353350533
- 4× max. 8.0 mm ø 25 32 mm 10
KEL-DP 25|64353150531
-4× max. 5.2 mm
2× max. 9.4 mmø 25 32 mm 10
KEL-DP 32|104353250532
4356050560
6× max. 5.2 mm
2× max. 6.4 mm
2× max. 9.4 mm
ø 32 38 mm 10
KEL-DP 50|94355450554
4356850568
5× max. 7.0 mm
4× max. 18 mmø 50 60 mm 10
KEL-DP 50|114355550555
4356950569
7× max. 7.2 mm
3× max. 11.2 mm
1× max. 22.5 mm
ø 50 60 mm 10
KEL-DP 50|124355150551
4356250562
10× max. 9.2 mm
2× max. 11.2 mmø 50 60 mm 10
KEL-DP 50|164355050550
4356450564
4× max. 5.3 mm
5× max. 6.3 mm
3× max. 9.5 mm
4× max. 11.3 mm
ø 50 60 mm 10
KEL-DP 50|184355350553
4356750567
5× max. 5.3 mm
5× max. 6.3 mm
4× max. 7.2 mm
2× max. 6.0 mm
2× max. 4.0 mm
ø 50 60 mm 10
KEL-DP 50|204355250552
4356650566
16× max. 6.3 mm
4× max. 9.3 mmø 50 60 mm 10
KEL-DP 50|354355650556
4357050570
35x max. 5.2 mm ø 50 60 mm 10
Fastening
Product description
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
-
44
142
44
142
44
55
55
| |
KEL-QTA
Cable entry frames
Speci- cation
Accessories
Page 47
Page 124 - 129
QT Cable inserts
FP Flanged plates
Elastomer
UL94-V0, self-extinguishing
IP54, with correct selection of
the cable inserts QT
- 40°C to + 90°C (static)
Halogen-free, silicone-free
For wall thickness 1.5 - 2.5 mm
For wall thickness 2.8 - 4.0 mm
Material
Flame class
Protection class
Temperature
Properties
Type A:
Type B:
Quick assemly without tools
High packing density by using multi inserts
Simple assembly and diasassembly in case of
change or service
Routing of pre-terminated and standard
cables in a high packing density
Suitable for standard cut-outs
Advantages
The KEL-QTA easily routes pre-terminated and
standard cables without using tools.
Description Type Order No. Order No. Cut-out Cables PU
Type A Type B [mm]
Product description
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
KEL- QTA 24|2
-DP 1843642 43643 112 × 35
pre-terminated2× 3 - 15 mm
conventional16× max. 7 mm 1× max. 12 mm1× max. 16 mm
10
KEL- QTA 24|4 43644 43645 112 × 35pre-terminated4× 3 - 15 mm
10
KEL- QTA B4 43660 - 45.5 × 45.5pre-terminated4× 3 - 15 mm
10
-
45
37,5
5
12
59
5
12
2,3
6,4
24
2,3
6,4
24
2,3
6,4
24
2,3
6,4
24
| |
Speci$ cation
Accessories
Page 47
Page 46
QT Cable inserts
KEL-AD Cap for attachment housing
Advantages
The KEL-QTA easily routes pre-terminated and
standard cables without using tools.
KEL-QTA | KEL-QTE
Cable entry frames
Type Order No. Order No Cut-out Cables PU Description
Type A Type B [mm] pre-terminated non-pre-term.
KEL-QTA 32 43632 43636 ø 32 1× 3 - 15 mm - 10
KEL-QTA 50 43622 43626 ø 50 2× 3 - 15 mm - 10
KEL-QTE
20|2.543412 - ø 20
1× 2.6 - 3.2 mm
1×max. 5.2 mm
10
KEL-QTE
20|343413 - ø 20
1× 3.1 - 3.8 mm
1× max. 5.2 mm
10
KEL-QTE
20|443414 - ø 20
1× 3.8 - 4.8 mm
1× max. 5.2 mm
10
KEL-QTE
20|543415 - ø 20
1× 4.7 - 5.6 mm
1× max. 5.2 mm
10
Product description
Elastomer
UL94-V0, self-extinguishing
IP54, with correct selection of
the cable inserts (QT single)
- 40°C to + 90°C (static)
Halogen-free, silicone-free
Metric standard sizes
For wall thickness 1.5 - 2.5 mm
For wall thickness 2.8 - 4.0 mm
Material
Flame class
Protection class
(QTA)
Temperature
Properties
Cut-out dimension
Type A:
Type B:
Quick assemly without tools
High packing density by using multi inserts
Simple assembly and diasassembly in case of
change or service
Routing of pre-terminated and standard
cables in a high packing density
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
-
47 | |
Type Order No. Clamping range PU Description
grey
Accessories
Speci& cation
Page 40 - 41
Page 42 - 43
Page 44 - 45
QTB 42540 Blind insert 10
QT 3 42503 3 - 4 mm 10 QT
QT 4 42504 4 - 5 mm 10
QT 5 42505 5 - 6 mm 10
QT 6 42506 6 - 7 mm 10
QT 7 42507 7 - 8 mm 10
QT 8 42508 8 - 9 mm 10
QT 9 42509 9 - 10 mm 10
QT 10 42510 10 - 11 mm 10
QT 11 42511 11 - 12 mm 10
QT 12 42512 12 - 13 mm 10
QT 13 42513 13 - 14 mm 10
QT 14 42514 14 - 15 mm 10
QT 2|3 42566 2× ø 3 mm 10
QT 2|4 42568 2× ø 4 mm 10
QT 2|5 42570 2× ø 5 mm 10
QT 2|5.5 42571 2× ø 5.5 mm 10 QT-ASI
QT 2|6 42572 2× ø 6 mm 10
QT 2|6.5 42576 2× ø 6.5 mm 10
QT 2|7 42578 2× ø 7 mm 10
QT 4|3 42580 4× ø 3 mm 10
QT 4|4 42582 4× ø 4 mm 10
QT 4|4.5 42583 4× ø 4.5 mm 10
QT 4|5 42584 4× ø 5 mm 10
QT 4|5.5 42585 4× ø 5.5 mm 10
QT 4|6 42586 4× ø 6 mm 10 QT tele
QT-ASI 1 42573 1× ASI-cable 10
QT-ASI 2 42574 2× ASI-cable 10
QT tele 42575 Telephone cable 10
When installing the insert, the smooth side of
the insert has to face the middle of the cable
entry frame.
Assembly
The QT range supports cable diameters from
3 to 15 mm. They are used with the following
cable entry frames:
KEL-QUICK Page 40 - 41
QVT / QVT-CLICK Page 42 - 43
KEL-QTA Page 44 - 45
QT
Inserts
Product description
Elastomer
UL94-V0, self-extinguishing
- 40°C to+ 90°C (static)
Halogen-free, silicone-free
Material
Flame class
Temperature
Properties
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
Insert QT in combination with QVT-CLICK
KEL-QUICK Cable entries
QVT Cable glands
KEL-QTA Cable entries
-
33 | |
Speci$ cation
Accessories
Page 28 - 32
Page 50 - 57
Page 58 - 60
KT + DT Cable inserts
Cable entry plates DPZ
Cable entry plates DP
Polyamide (PA), white
UL94-V0, self-extinguishing
IP54
- 40°C to + 120°C
Halogen-free, silicone-free
Sealing unused cable entries
Plugs are used to close either KT inserts or
KEL-DPZ cable entry plates not equipped
with cables.
Perfect for appplications where cables
have been removed.
ST
Plugs
Product description
Material
Flame class
Protection class
Temperature
Properties
Advantages
Type Order No. Diameter Length PU Description
D L
ST 2 42909 2.0 mm 25 mm 25
ST 3 42901 3.0 mm 25 mm 25
ST 4 42908 4.0 mm 25 mm 25
ST 5 42906 5.0 mm 25 mm 25
ST 6 42903 6.0 mm 25 mm 25
ST 7 42905 7.0 mm 25 mm 25
ST 8 42899 8.0 mm 20 mm 25
ST 9 42897 9.0 mm 20 mm 25
ST 10 42895 10.0 mm 20 mm 25
ST 11 42893 11.0 mm 20 mm 25
ST 12 42891 12.0 mm 20 mm 25
ST 13 42889 13.0 mm 20 mm 25
ST 14 42887 14.0 mm 20 mm 25
ST 15 42885 15.0 mm 20 mm 25
ST 16 42883 16.0 mm 20 mm 25
ST 17 42881 17.0 mm 20 mm 25
ST ASI 42877 - 25 mm 25
www.icotek.de tel +49 (0) 71 75 - 923 80 0 fax +49 (0) 71 75 - 923 80 50
L
D
top related