klima produkti
Post on 02-Jun-2018
224 Views
Preview:
TRANSCRIPT
-
8/11/2019 Klima Produkti
1/78
Product overview
HVACproducts and systems
We create a pleasant air
-
8/11/2019 Klima Produkti
2/78
High efficiency Aesthetics Custom tailored solutions
We create comfortable, pleasant and healthyindoor air for all kinds of buildings and for all kinds of interiors
feel the
freshnessenergywarmthpuritycomfort
-
8/11/2019 Klima Produkti
3/78
Air distributioncomponents
Air regulationunits
Soundattenuators
Fans
Fire and smokedampers
Clean roomtechnology
Automation, Total Building Control, Intelligent Installations
Complete solutions for HVAC
Externalelements
Ceilingcassette units
Easy, smart and user friendly
-
8/11/2019 Klima Produkti
4/78
Air handling units
Chillers
Fan coils
Floorconvectors
Ventilatedceilings
Solarcollectors
stems
Radiatorconvectors
Industrialfan heaters
Heatexchangers
Air Distribution Elements Ventilation grilles and valves Ceiling circular and square
diffusers Swirl and variable swirl diffusers Slot diffusers and duct diffusers Air displacement units Jet nozzles
External elements Protection louvres Air towers
Air regulation units Overpressure dampers Volume control dampers Throttling, shutt-off and non-
return dampers Mechanical and electronic
volume controllers
Sound Attenuators Square, circular and inter-room
sound attenuators Acoustic louvres
Fans In-line rectangular fans
Fire Dampers Fire dampers and valves Smoke dampers
Hepa Filter Units Duct pre-lter units Hepa lter units (duct, wall and ceiling units) Supply air ceilings
(perforated and textile version)
Convector Units Fan coil units Climmy 4 Ceiling cassette units Climmy
Comfort 2
Floor convectors Radiator convectors Industrial fan-heaters UniKal
Air Handling Units (1000 m3/hup to 100.000 m3/h) Air handling units Klimair2
Indoor and outdoor units
Swimming pool air handling unitsHygienic grade air handling unitsPositive pressure inatable dome ventilation units
Air handling units Optima Ceiling air handling units KSM Air handling units CompAir Air handling units with adiabatic
cooling
Chillers Air cooled liquid chillers Water cooled liquid chillers
Split liquid chillers Compressor-condensing units Air cooled condensers Driers
Ventilated Ceilingsfor Large Kitchens Ventilated ceilings Jet stream extractors UV-C(lean) system
Heat exchangers Heat exchangers suitable for
Air handling units Heat exchangers suitable for
duct installation Water and stream heating coils,
water air cooling coils,evaporating coils for coolinggases (R407c, R410a,)
A Wide and Complete Range of Products
Software
for calculation
and product selection
-
8/11/2019 Klima Produkti
5/781
Air regulation units,Sound attenuators,Fans
Air distribution components
Fire dampers
Clean room technology
Convectors
Air handling units
Product overview
Cooling technique
Solar systems
Ventilated ceilingsPage: 42-455
Page: 2-71
Page: 26-414
Page: 8-132
Page: 52-557
Page: 46-516
Page: 68-719
Page: 56-678
Page: 14-253
-
8/11/2019 Klima Produkti
6/782
-
8/11/2019 Klima Produkti
7/783
Air handling units
1
-
8/11/2019 Klima Produkti
8/784
AIR HANDLING UNITSApplicationHidria air handling units are used for centralair conditioning in ofcebuildings, hotels,restaurants, theatres and sports facilities,hospitals, indoor swimming pools, industrial
applications, clean rooms, and otherbuildings.
Characteristics- Hidria air handling units supportall basic air conditioning functions:heating, cooling, ltration, humidication,
dehumidication, recuperation and regeneration.- We manufacture 38 different sizes of airhandling units with volume air ow of
500 m 3 /h to 100.000 m 3 /h.- Hidria air handling units aredistinguished by excellent thermal andsound insulation.
- They allow a customized selection offunction elements with high utilisation rates.
- A modern construction enablesdimensional adaptability.
Types, VersionsKlimair 2 - air handling unit, wallthickness 50 mm- indoor version (KNN)- outdoor version (KZN)- swimming pool version (KBN)- hygienic version (KHN)
- version for heating and ventilation ofoverpressure halls (KZNK)
KSM- ceiling air handling units, wall thickness15 mm
Optima- air handling units, wall thickness 33 mm(indoor version)
CompAir NEW 2008- it consists of efcient compactventilationunits
- standard equipment: frequency-regulatedfans with a full bypass for summer modeventilation without heat transfer.
- operation with a high-yield (90%) counterow exchanger in a range of 500 to 4300 m 3 /h- it is designed for indoor or outdoorinstallation
AIR HANDLING UNITS
Klimair 2
Optima
KSM
CompAir
-
8/11/2019 Klima Produkti
9/785
-
8/11/2019 Klima Produkti
10/786
AIR HANDLING UNITSRecuperationHidria air handling units allow users toselect an optimal system for heat or coldrecuperation from waste air:- plate recuperator system
- rotary recuperator system- system with two heat exchangers connectedto a tube circuit - strip recuperator
- heat tube system- heat pump system
Adiabatic (evaporative) cooling with heatrecovery efciency of over 85%- a double plate recuperator system withhigh pressure humidication (transforms
water into so-called cold vapour),- external air is cooled by using only water,without the conventional chillers which useFreon and consume a lot of electrical energy,
- exhaust air is humidied to approximately 95 % relative humidity,- sensitive heat recovery utilisation rateamounts to a minimum of 80 %,
- adiabatic (evaporative) cooling is entirelyhygienically sound,
- we have acquired the required certicateof hygiene according to the VDI 6022 standardfrom the competent German institute.
Automatic controls- regulation equipment (temperaturesensors, pressure sensors, motorised
valves), electrical control cabinets,functional start-up,- project planning and execution of centralmanagement systems.
Aircalc++ selection softwareIn the process of air handling unit selection,we use Aircalc++ multi-language selectionsoftware which is also an excellent tool forthe planning of air conditioning systems asit makes calculations as well as producessketches that can be exported into AutoCAD,textual descriptions, and thermodynamicprocess charts in the form of Mollier h-xdiagram.
AIR HANDLING UNITS
Recuperation unit
Central managment system
Control equipment
Adiabatic cooling
Aircalc++ selection software
-
8/11/2019 Klima Produkti
11/787
-
8/11/2019 Klima Produkti
12/788
-
8/11/2019 Klima Produkti
13/789
Cooling technique
2
-
8/11/2019 Klima Produkti
14/7810
CHILLERSTypes, Capacity
Air cooled liquid chillers- KVA for outdoor installation, cooling capacityfrom 5kW up to 1900 kW
- KVR for indoor installation, cooling capacityfrom 5kW up to 250 kW
Water cooled liquid chillers- KVH for indoor installation, cooling capacityfrom 5kW up to 250 kW
Condenserless water chillers- KUU with remote condenser for indoorinstallation, cooling capacity from 5 kW up to1500 kW
Compressor-condensing units- KKA for outdoor installation, cooling capacityfrom 5 kW up to 250 kW
- KKR for indoor installation, cooling capacityfrom 5 kW up to 250 kW
Hydronic module- HM 5080- HM 15002500
CHILLERS
KVA/RK Compact Line with one-component environment friendly refrigerant R410A
KKA Compressor-condensing unit
KVA/Y energy class A Air cooled liquid chiller
KVH Water cooled liquid chiller
-
8/11/2019 Klima Produkti
15/7811
-
8/11/2019 Klima Produkti
16/7812
AVK AIR-COOLEDCONDENSERS ANDAVL DRY COOLERSApplicationAVK air-cooled condensers and AVL drycoolers are designed to treat the heat exhaustfrom air conditioning and cooling units,industrial premises and cooling chambers.The difference between the AVK and AVLunits lies in the refrigeration media. The AVKsrefrigeration media is freon, while the AVLuses a uid (a water-glycol mixture or oil andwater).
Characteristics- Treating heat exhaust from the airconditioning and cooling units
- Cooling power ranges from 10 kW to 850 kW- External stand alone unit
- Installed axial fans for horizontal or verticalplacement- Serial or parallel placement of manyventilation fans
Component partsHousing- zinc-plated sheet steel or zinc-plated sheetsteel painted according to RAL 7035
- legs for vertical or horizontal placementand lifting ears are included in the serialequipment
Blade heat exchanger- standard piping package dimensions are60 30mm or 28.5 33.3mm, with analternative pipe placement
- copper pipes with an external diameter of16mm or 12mm
- aluminum blades of 0.12mm can be orevenly or undulate
- connections are suitable for both verticaland horizontal placement
Fans- sword-type blades produced by Al pressurecasting
- ventilation fans allow 100 % rotation speedregulation, which helps contribute to bettermaintaining of noise regulation requirements
- fan housing is made of zinc-plated steelsheet and welded steel sheet for largerdiameters
- ventilation fan diameters are: 350, 630,800, 1000 and 1250mm; or according tocustomer requirements
- powered by three-phase electric motor withan external rotor
- IP 54 protection level- variable ventilation fan rotation speedavailable according to pressure ortemperature
AIR-COOLED CONDENSERS AND DRY COOLERS
AVL Dry cooler
AVK Air cooled condenser
-
8/11/2019 Klima Produkti
17/7813
-
8/11/2019 Klima Produkti
18/7814
-
8/11/2019 Klima Produkti
19/7815
Air regulation units, Sound attenuators, Fans
3
-
8/11/2019 Klima Produkti
20/7816
PROTECTION LOUVRESProtection louvres are installed in buildingfronts (in supply and exhaust air openings) asa protection against the direct ingress of rain,birds, bigger insects etc. They are suitablefor all low pressure air-conditioning, heatingand ventilation. They are made of galvanisedsteel or aluminium in numerous standard orspecial dimensions.
SUPPLY AIR/EXHAUST AIRTOWERSAir towers are used for the supply andexhaust of air. Various construction typescan be made of different materials andin different dimensions according to thecustomers request.
OVERPRESSURE DAMPERS
Overpressure dampers are used to equalizethe pressures between adjacent rooms andfor automatic interruption of air supply orair exhaust. Steel (Types JN) or aluminium(Types AN) overpressure dampers can beproduced.
PROTECTION LOUVRES, SUPPLY AIR/EXHAUST AIR TOWERSOVERPRESSURE DAMPERSProtection louvres
AZR-3 AZR-4
JZR-6
Overpressure dampers
Supply air/exhaust air towers
SP
JN-6
OZR-1
AN-3, 4
-
8/11/2019 Klima Produkti
21/7817
-
8/11/2019 Klima Produkti
22/7818
VOLUME CONTROL DAMPERSVolume control dampers regulate the airow volume in ventilatingducts and airconditioning devices. We produce severalconstruction types with manual, motor orpneumatic regulation.
THROTTLING, SHUT OFF ANDNON RETURN DAMPERS, FLOWRATE CONTROLLERSThey are used to control the air ow volume inventilating ducts.
VOLUME CONTROL DAMPERS,THROTTLING, SHUT-OFF AND NON-RETURN DAMPERS Volume control dampers
R-1 R-2
R-7
Throttling, Shut-off and Non-return dampers
DL
ZL-2 MRP-1
ERP-1 ERP-2
RSK DL-2
MRP-2
ERP-3
R-3
R-1/G
-
8/11/2019 Klima Produkti
23/7819
-
8/11/2019 Klima Produkti
24/7820
SOUND ATTENUATORSSound attenuators are designed to quietfan and air-conditioning device noises inventilation ducts, and to prevent propagationof noise between rooms.
Sound attenuators DZ-2 and DZ-3:DZ-2sound attenuators eld of application isthe attenuation of fan noise in ventilation andairconditioning installations. They provide veryefcient attenuation in the250 Hz octaveband. K-2 splitters built in these attenuatorsconsist of alternant layers of absorbingmaterial and galvanised steel sheetmembranes.
DZ-3 sound attenuators eld of applicationcomprises attenuation of industrial machinerynoises and special applications inairconditioning systems. They provide veryefcient attenuation in the 500 to4000 Hzfrequency range. K-3 splitters built in theseattenuators have their entire surface made ofabsorbing material.
Round sound attenuators ODZ-1ODZ-1round sound attenuators are appliedin ventilation and air-conditioning systems forattenuation of fan noises. They are suitablefor installation in either inlet or outlet pipesof axial fans, in inlet pipes of radial fans, orinstallation in circular cross-section ducts.
Round sound attenuators MDZ-50MDZ-50 round sound attenuators preventpropagation of noise between rooms throughventilation ducts.
SOUND ATTENUATINGLOUVRESSteel attenuating louvres JAR are designed toprevent ingress of outside noises into thebuilding interior, or propagation of noises fromthe building into the environment, throughsupply or exhaust openings. In addition totheir acoustic protection function, they also
serve as conventional protection louvres.
SOUND ATTENUATORS, SOUND ATTENUATING LOUVRES
Rectangular sound attenuators DZ-2, DZ-3
DZ-2, DZ-3 K-2, K-3
ODZ-1
Sound attenuating louvres JAR
Round sound attenuators MDZ-50
MDZ-50
JAR
Round sound attenuators ODZ-1
Software Klima DZ
-
8/11/2019 Klima Produkti
25/7821
-
8/11/2019 Klima Produkti
26/7822
IN-LINE RECTANGULAR FANSIRB / IRBSIRB and IRBS are a compact series ofcentrifugal type exhaust and supply in-lineduct fans for air conditioning systems. Theyare specically designed for installationwherespace is limited and allow installation directlyat any angle and any location along the ductsystem.Due to their silent operation, they can beused for direct air exhaust from the room orfor air supply into the room.
CHARACTERISTICS- Duct fans are designed in nine nominal connection dimensions.- IRBS: sound isolated housing for all nominal dimensions.- Nominal connection dimensions from
300 x 150 mm to 1000 x 500 mm- Single phase fans from nominal dimension 300 x 150 mm to 600 x 350 mm- Three phase fans in all nominal dimensions.- Air owup to 17.000 m3/h.- Static pressure up to 1.250 Pa.- Direct installation into air duct systems with housing connection anges;- Housing is entirely made of galvanized sheet steel;- Motor with centrifugal backward curvedimpeller is mounted on a swing out door,enabling easy servicing access;
- Impellers with backward curved blades andhigh hydraulic efciency;
- Efcient, qualityand user-friendly regulation.
IN-LINE RECTANGULAR FANS IRB / IRBS
IRB
IRBS
-
8/11/2019 Klima Produkti
27/7823
-
8/11/2019 Klima Produkti
28/7824
DUCT VENTILATION SYSTEM
Protection LouvreAZR-3
Volume ControlDamper R-2 Duct Fan IRBS Throttling Damper DL
Variable SwirlDiffuser OD-11
Hepa FilterUnit KPF
Flow rateController ERP-2
Sound AttenuatorDZ-2 Air Heater GV Fire Damper PL-18
-
8/11/2019 Klima Produkti
29/7825
-
8/11/2019 Klima Produkti
30/7826
-
8/11/2019 Klima Produkti
31/7827
Air distribution components
4
-
8/11/2019 Klima Produkti
32/7828
VENTILATING GRILLESVentilating grilles are designed for all types of low-pressure- air-conditioning-, heating- andventilation systems with built in air ow- andthrow distance control as well as regulation of discharge angle. They can be used for both,
supply air and exhaust air applications.The inlet angle of grilles with thermostatregulation is automatically adjusted accordingto the selected temperature mode forsupplied air. This way, the direction of thesupplied air is dynamically adjusted whichincreases the living comfort.
Aluminium grilles AR, SR-5 ...8Aluminium grilles are made of extruded Alsections anodised in natural aluminiumcolour. Upon customers request they can beanodised in other colours or powder painted.
Steel grilles JR, SK, SR-1...4Steel grilles are made of sheet steeland powder painted in RAL 9010. Uponcustomers request they can be made ofgalvanised or stainless steel, respectively.Other RAL colours are possible upon request.
VENTILATING VALVESVentilating valves are designed to extractair from sanitary rooms and other premisesand can be also used in low pressure air-conditioning systems with air ow control.
Steel ventilating valves PV-1, PV-2Steel ventilating valves are made of sheetsteel and coloured with powder coating inRAL 9010.Upon customers request other RAL coloursare possible.
Aluminium ventilating grilles
Steel ventilating grilles
Special grilles (Grease traps, Filter grilles, Linear grilles)
Ventilating grilles and valves
AR-5 AR-6, 7 AR-8, 9
AR-13 AR-14 AR-17 AR-18
JR-3 JR-4 JR-7 JR-8
Duct grilles - for circular and rectangular ducts
Ceiling grilles (steel)
Ceiling grilles (aluminium)
SK-2 SK-3 SK-4
SR-1 SR-2 SR-3 SR-4
SR-5 SR-6 SR-7 SR-8
Grilles with thermostatic regulation (aluminium, steel)
AR-18/TR JR-8/TR
LM-2 .../PF .../T
PV-1 PV-2
VENTILATING GRILLES AND VENTILATING VALVES
-
8/11/2019 Klima Produkti
33/7829
-
8/11/2019 Klima Produkti
34/7830
CIRCULAR DIFFUSERSCircular diffusers can be used for supply orextract air. Due to high induction (mixing ofsupply and room air) they are suitable forlarger temperature differentials betweenthe supply and room air. Diffusers have high
capacity and low sound power level.
Steel circular diffusers OD-1, OD-2:They consist of sheet steel, powder coatedin RAL 9010. Upon customers request,they can be coloured in any RAL colour.
Aluminium circular diffuser OD-3N:Diffuser rings are made of sheet aluminiumand regulation mechanism consist of steel.Diffuser is powder coated in RAL 9010. Uponcustomers request , they can be coloured inany RAL colour.
SQUARE DIFFUSERSSquare diffusers are designed for supply andextract air. Due to high induction (mixing ofsupply and room air) they are suitable forlarger temperature differentials between
the supply and room air. Diffusers have highcapacity and low sound power level.
Steel square diffusers KD-1, KD-2, KD-6,KD-7, KD-12, KD-15, KD-16:They consist of sheet steel, powder coated inRAL 9010. Upon customers request, they canbe coloured in any RAL colour. Plenum box ismade of galvanised sheet steel.
Steel circular diffusers OD-1, OD-2
OD-1 OD-2
Aluminium circular diffusers OD-3N
OD-3N
CIRCULAR AND SQUARE DIFFUSERS
Square diffusers
Circular diffuser OD-10
OD-10
KD-1 KD-2
Perforated square diffusers
KD-6, KD-7 KD-12 KD-15 KD-16
-
8/11/2019 Klima Produkti
35/7831
-
8/11/2019 Klima Produkti
36/7832
SWIRL DIFFUSERSApplication:Swirl diffusers are designed for air-conditioning of room with oor to ceiling heights from 2,6 to 4m and temperaturedifference between supply and room air
of +10K to -10K. Due to the rotary swirlingmotion of the air discharge, induction of room air occurs very quickly. Swirl diffusersare suitable both for comfort as well asindustrial airconditioning.
Description:Swirl diffusers consist of plenum box made of galvanised sheet steel and diffuser face.Diffuser face is made of sheet steel powderpainted in RAL 9010 or any RAL colour uponcustomers request.
OD-8TRAccording to the temperature prole,OD-8/TRautomatically adjusts the inlet air ow. Theswirl effect is used in the cooling mode, whilethe vertical air owis in effect during heating.During transition periods, the diffuserautomatically adjusts the optimum dischargeangle which contributes to increased comfortlevel in the room.
SWIRL DIFFUSERS
OD-4 OD-5
OD-8 OD-9
Swirl diffusers
Software Klima ADE
OD-7
-
8/11/2019 Klima Produkti
37/7833
-
8/11/2019 Klima Produkti
38/7834
VARIABLE SWIRL DIFFUSERSApplication:Variable diffusers are designed for rooms withchanging thermal loads which requiredifferent conditioning (heating, cooling). Theyare suitable for rooms with oor to ceiling height of up to 10 m and recommendedtemperature difference between supplyand room air +10K and -10K. Requiredconditioning is achieved by the means ofmanual or power driven blades adjusting.Variable diffusers are suitable for bothcomfort and industrial conditioning.
Description:Variable diffusers consist of plenum boxmade of galvanised sheet steel and diffuser.Diffusers are made of sheet steel or sheetaluminium (OD-11) and powder painted inRAL 9010 or any RAL colour upon customersrequest.
OD-11V/TRAt OD-11V/TR diffuser, centrally adjustableblades can be adjusted automatically withthe thermostat regulation. Thermostatperceives temperature of the supply air andautomatically adjusts the blades angle.
VARIABLE SWIRL DIFFUSERS
Variable swirl diffusers
Software Klima ADE
OD-6 OD-11
KD-8
-
8/11/2019 Klima Produkti
39/7835
-
8/11/2019 Klima Produkti
40/7836
SLOT DIFFUSERSApplication:Slot diffusers are designed for air supply inrooms with oor to ceiling heights of 2.5 to4 m. They are suitable for supplying eithercold or warm air, in particular in applications
where air conditioning comfort demands arestringent. Due to their high induction rate andrapid decrease of temperature difference,these diffusers are also suitable for variablesystems.
Description:Diffuser face plate is made of anodizedaluminium sections with built-in cylindricaldeectors madeof recycled plastics.Deectors allow continuos adjustment of discharged air direction within the 360range. The diffuser plenum box is made of galvanised sheet steel and has a owratecontrol damper built in its inlet spigot, to allowneadjustment of thedesired airow rate.
PANEL DESIGN SLOTDIFFUSERSA panel design slot diffuser consists of aface plate and a plenum box. Cylindricalair deectors, equal to those in LD-13 andLD-14 diffusers, are installed in the slots, toallow continuous adjustment of dischargedair direction within the 360 range. On or-der, diverse plate designs and slot patternsare available.
ROUND DUCT DIFFUSERSApplication:Round duct diffusers can be installed atvarious locations within the duct network.They are suitable for supplying either cold orwarm air.
Description:They are made of galvanised tubes with slotsequipped with cylindrical air deectors equalto those in the LD-13 slot diffuser, to allowadjustment of air direction and ow rate. Asstandard, the tube and cylindrical deectorsare in RAL 9010 white colour.
SLOT DIFFUSERS, ROUND DUCT DIFFUSERS
Slot diffusers LD-13, LD-14, LD-15, LD-16N
LD-13 LD-14
LD-15
Round duct diffusers SKD-13
Panel design slot diffusers LDP-13 and LDP-14
LDP-14
SKD-13D
Software: Klima ADE
LD-16N
-
8/11/2019 Klima Produkti
41/7837
-
8/11/2019 Klima Produkti
42/7838
AIR DISPLACEMENT UNITSAir displacement units are suitable for bothindustrial and comfort air conditioningapplications. They are suitable for roomscharacterised by high heat loads or heavy airpollution. Air displacement units supply air at
large ow rates (up to 10,000 m 3 /h), at lowair velocities (in the range from 0.1 to 0.3 m/s). The air so supplied forms a so called freshair pool in the occupied zone. Air is lifted inconvection currents from heat sources to theceiling layer, from which it is extracted fromthe room. In this way, even temperature eldis maintained in the room, free of draught.
Types:SD-1: cornerSD-2: semi-cylindricalSD-3: cylindricalSD-6: rectangular
AIR DISPLACEMENT UNITS
SD-1 SD-2
SD-3 SD-6
-
8/11/2019 Klima Produkti
43/7839
-
8/11/2019 Klima Produkti
44/7840
SUPPLY AIR NOZZLESSupply air nozzles are designed to supplyair into rooms in applications requiring largethrow distances and low noise levels. Theyare suitable for supplying either cold orwarm air. They are made of anodised sheet
aluminium. On request, they can be powderpainted in any of the RAL scale colours. Airsupply nozzles are supplied either as singlecomponents or assembled into blocks, whichconsiderably increase throw distance.
Supply air nozzles V-1V-1 supply air nozzles are of a xedconstruction. They are supplied either assingle components or assembled into blocks.
Supply air nozzles V-4V-4 supply air nozzles are adjustable. The air jet direction can be adjusted either manuallyor by means of a motor drive, within a 30range.
Supply air nozzles V-5V-5 supply air nozzles can be adjusted in thesame way as V-4. Supply air nozzle isintegrated into the housig and does notprotrude into the room.
SUPPLY AIR NOZZLES
Supply air nozzles V-1
Software Klima ADE
Supply air nozzles V-5
Supply air nozzles V-4
_
-
8/11/2019 Klima Produkti
45/7841
-
8/11/2019 Klima Produkti
46/7842
-
8/11/2019 Klima Produkti
47/7843
Ventilated ceilings
5
-
8/11/2019 Klima Produkti
48/7844
VENTILATED CEILINGSUse and operation:GIF demountable ventilated ceilings are highlyeffective and sanitary ventilation systemsintended for larger kitchens and restaurants.They operate as overall surface supply and
extract elds that ensure reliableextraction of steam while cooking or baking. The individualcassettes separate fat and condensation byharnessing the physical phenomena of inertiaand condensation. The even supply of airprevents draught while creating a favourableclimate.
Description:The cassette system allows optimaladaptability, allowing installation into any typekitchen.The exclusive use of high-quality chrome-nickel steel (CrNi 1.4301) ensures perfecthygiene and stability.The uniform ceiling grid consists of thefollowing components:
- active cassettes for air supply and extraction,- at air supply cassettes for lower air exchange rates,- acoustic cassettes for optimal noisereduction during supply of fresh air,
- the ceiling integrated lights for humid areaswith an IP 54 protection rating are protectedagainst a build-up of fat or dust by a curtainof fresh air provided by connection to the air
supply duct,- the GIF-Restaurant system is specically designed for those particularly intensivekitchens with extremely high fat and steamvapours.
Assembly and cleaning:Individual cassettes are mounted on supportproles.Cassettes can be pushed andpulledin and out of the suspension grid, allowing foreasy removal and reinsertion. In case of re,the cassette system protects the intermediatespace in the ceiling thus preventing anyre from spreading. Thecassettes can becleaned quickly and easily in any ordinarydishwasher.
Active cassette
Flat air supply cassette
Lights
Acoustic cassette
VENTILATED CEILINGS
GIF-Restaurant system
-
8/11/2019 Klima Produkti
49/7845
-
8/11/2019 Klima Produkti
50/7846
-
8/11/2019 Klima Produkti
51/7847
Clean room technology
6
-
8/11/2019 Klima Produkti
52/7848
DUCT PRE-FILTER UNITSDuct pre-lter units KPFaredesigned to cleanthe air in air-conditioning and ventilatingsystems.Built-in lters areof F5 to F7 class.Varioustypes of duct housings enable the air ltration
with air owfrom 3.400 m3 /h up to20.400 m 3 /h.
HEPA -FILTER UNITSDuct HEPA lter units AKF are constructedfor installation in duct system. Built-in lters of H10 to H13 class remove up to 85 % particlesof 0,3 m (lters H10) or up to99,95 %particles of 0,3 m (lters H13).Wall HEPA lter units (AFH)and ceilingHEPA lter units (AFV-8) are used in both,supply and exhaust air ventilation andairconditioning installations, which require
maximal cleanness of the air. Built-in Hepalters are of H10 toH14 class. Theylter andremove particles with a diameter of 0,3 m indifferent levels: from 85 % (lters H10) up to99,995 % (lters H14).Ceiling HEPA lter units typeAFV-8 G has aspecial washer frame for attachment the ltervia gel gasket. AFV-8 G version guaranteeabsolute sit tightness for the lters up to classU16, which remove 99,99995 % of particleswith diameter of 0,12 m.
SUPPLY CEILINGSSupply ceilings with built-in HEPA lters of H10 to H14 class, are used for clean roomswhere air cleanness as well as intensiveairexchange is required. They are constructedto be built in false ceilings of operation rooms,intensive care premises and other cleanrooms.
FLUFF SEPARATOR AND FILTERGRILLESFluff separators LN and Filter grilles FR areapplied in air exhaust from clean rooms. Theyare designed for wall mounting.
DUCT PRE-FILTER UNITS, HEPA FILTER UNITS,SUPPLY CEILINGS
Duct pre-lterunits KPF
KPF
AFV-8G
Duct units with Hepa lter
AKF
Supply ceilings with Hepa lters
Ceiling and wall units with Hepa lters
AFV-8
DPS DSS
Fluff separator LN and Filter grilles FR
LN-1 LN-2 FR
AFH-1 AFV-8U
-
8/11/2019 Klima Produkti
53/7849
-
8/11/2019 Klima Produkti
54/7850
Volume ControlDamper R Duct Fan IRB
Hepa FilterUnit AFV-8
Shut off DamperZL-2
Filter Grille FR
Supply AirCeiling - textileversion DSS
Fluff SeparatorLN
Fire Damper PL
Flow rateController MRP
Flow rateController ERP
Supply AirNozzle V-5
ProtectionLouvre AZR
Hygienic grade AirHandling Unit
Duct HepaFilter Unit AKF
CLEAN ROOM
-
8/11/2019 Klima Produkti
55/7851
-
8/11/2019 Klima Produkti
56/7852
EN 1366-2
-
8/11/2019 Klima Produkti
57/7853
Fire dampers
7
-
8/11/2019 Klima Produkti
58/7854
FIRE DAMPERSFire dampers are installed in rectangular orcircular ventilation ducts, at passages of recompartments. In case of re,re dampersclose automatically, thus preventing re fromspreading through the ventilation ducts. Fire
resistance is 30, 60, 90 or 120 minutes.
Types according to the release mechanismtype:- basic type with fusible link release- motorized type with electric actuator
FIRE PROTECTION VALVES Fire protection valves are used to preventre from spreading from bathrooms,kitchens. They are installed at the beginningof ventilating ducts, directly into the wallsor ceilings. Release mechanism triggers at
70 C.Fire protection valves have two functions:- they are the part of re protectionwall with re resistance 90 min- they are used for aeration (both, air supplyand exhaust) with a possibility of air ow
regulation
SMOKE DAMPERSSmoke dampers open automatically in caseof re and thus enable the exhaust of smokeand heat.Fire resistance is 30, 60, 90 or 120 minutes.
Types according to the release mechanismtype:- basic mechanical type with fusible link- solenoid type- motorized type with electric actuator
Rectangular redampers
Circular re dampers
Fire protection valves
Smoke dampers
PL-12 PL-15 PL-18-1 PL-18-2
PL-13 PL-14
PL-16 PL-17
PPV-K90
DOL-1R DOL-1RK DPL-7
DOL-3-1 DOL-3-2
FIRE DAMPERS, FIRE PROTECTION VALVES, SMOKE DAMPE
PL-18-3 PL-18-4
-
8/11/2019 Klima Produkti
59/7855
-
8/11/2019 Klima Produkti
60/7856
-
8/11/2019 Klima Produkti
61/7857
Convectors
8
-
8/11/2019 Klima Produkti
62/7858
FAN COILSApplication and operationFan coils are devices designed for roomair-conditioning purposes; their functionsinclude heating, cooling, room ventilationand, to a certain degree, air drying. Theyare suitable for a variety of applications:business premises, schools, restaurants,galleries, hotel rooms, shops, etc. Theiroperation involves forced fan drivenconvection of air through a heat exchanger.
Types, designs, sizesOur production program includes a broadrange of types and designs:- for two-pipe and four-pipe systems,- visible designs (parapet, wall or ceiling mounting),- ush designs (wall or ceiling mounting),- air circulation operation and room/freshair mixing operation,
- all designs in six sizes (100 to 600).
Characteristics of fan coil CLIMMY 4- high cooling and heating capacities:cooling capacities from 1.5 kW to 7.6 kWand heating capacities from 1.8 kW to10.6 kW, (EUROVENT conditions)
- centrifugal fan with 5 speeds,- control with different thermostats and arange of accessories,
- front metal housing painted in standardRAL 9010; other RAL scale colours areavailable on request,
- discharge grille with control louvres madeof anti-static ABS material,
- adjustable deectors in discharge grille for setting direction of discharged air ow (visible design only),- easy lter replacement,- dismountable discharge grille and bothsides,
- easy installation and maintenance,- advanced industrial design and attractive appearance (designed by Marjan itnik,Slovenia).
Software Klima C4 (Climmy 4)- calculation of cooling and heatingcapacities for different termperature
regimes and water ow rates;- calculation is available for cooling, heatingmode and combined cooling and heatingmode, depending on the customersoperational mode specications;
- operational mode can be specied in both ways: water inlet and outlet temperature,water inlet temperature and mass ow rate;
- with ush design models, the package allows the viewing of fan performances asa function of external static pressure atthe fan coil discharge;
- following the calculation, the packagepresents the results of all six fan coil sizesaccording to the specied operational
mode and conditions;- the calculation results, complete with thedrawing, dimensions and ordering key forthe selected fan coil are available in theprintout form.
Visible designs - VV, VVN, HV, HVN, VVM1, VVM2, HVM1, HVM2
Flush designs - VS, HS, VSM1, VSM2, HSM1, HSM2
Software Klima C4 (Climmy 4)
FAN COIL CLIMMY 4
-
8/11/2019 Klima Produkti
63/7859
-
8/11/2019 Klima Produkti
64/7860
CLIMMY COMFORT 2Application and operationCeiling cassette units are devices designedfor room air-conditioning purposes; theirfunctions include heating, cooling, roomventilation and, to a certain degree, airdrying. They are suitable for a variety ofapplications: business premises, schools,restaurants, galleries, hotel rooms, shops,etc. Their operation involves forced fandriven convection of air through a heatexchanger.
Types, designs, sizesOur production program includes a broadrange of types and designs:- for two-pipe and four-pipe systems,- two designs (nozzles, aluminium blades),- inlet for pre-conditioned air,- all designs in four sizes (600/1, 900/2,1200/2, 1200/3).
Characteristics of CLIMMY COMFORT 2- high heating and cooling capacities: cooling capacities from 0.6 kW to 5.5 kW andheating capacities from 1 kW to 8.0 kW,(EUROVENT conditions)
- electric heater: 1.5 to 2.0 kW,- centrifugal fan with 5 speeds,- control with different thermostats and arange of accessories,
- diffusers may be tted with nozzles or aluminium blades,- shape and dimensions suitable forinstallation in suspended ceiling,
- easy lter replacement,- easy installation and maintenance.
Software Klima CC2(Climmy Comfort 2)- calculation of cooling and heatingcapacities for different temperatureregimes and water ow rates;
- calculation is available for cooling, heatingmode and combined cooling and heatingmode, depending on the customersoperational mode specications;
- operational mode can be specied in both ways: water inlet and outlet temperature,water inlet temperature and water ow rate;
- with ush design models, the package allows the viewing of fan performances asa function of external static pressure at thefan coil discharge;
- following the calculation, the packagepresents the results of all six fan coil sizesaccording to the specied operational
mode and conditions;- the calculation results, complete with thedrawing, dimensions and ordering key forthe selected fan coil are available in theprintout form.
CEILING CASSETTE UNIT CLIMMY COMFORT 2
Ceiling Cassette Unit Climmy Comfort 2
Software Klima CC2 (Climmy Comfort 2)
-
8/11/2019 Klima Produkti
65/7861
-
8/11/2019 Klima Produkti
66/7862
RADIATOR CONVECTORSApplication and operationRadiator convectors are modern heatingbodies designed for heating of business andshopping premises, car showrooms, hotellobies and other rooms. They serve eitheras primary heating bodies or secondaryheating bodies, combined with primaryheating bodies of other types (fan coils,air conditioning devices, etc.) They areparticularly suitable for application in allrooms with envelope walls exposed to lowexterior temperatures (large windows orglass walls, cold walls).
Types, Designs, SizesOur production program includes a broadrange of types and designs:- for two-pipe systems only,- free-standing design (mounting on the oor),- wall design (wall mounting),
- 240 standard dimensions (20 lenthgs, 3depths, 4 heights).
Characteristics of radiator convector- high heating capacities from 0.2 kW to7.2 kW,
- silent operation (natural convection),- control with thermostat valve,- housing painted in standard RAL 9010;other RAL scale colours are available onrequest,
- discharge grille made from perforated plateor xed longitudinal grille,
- dismountable discharge grille and fronthousing (when already installed),
- easy installation and maintenance,- advanced industrial design and attractive appearance.
Software KLIMA RK- calculation of heating capacity for different termperature modes and water ow rates,- calculation is available for heating modes, depending on the customers operationalmode specications,
- operational mode can be specied in both ways: temperature mode and the waterinlet temperature with mass ow rate
mode,
- following the calculation, the packagepresents the results of requested orrecommended sizes according to thespecied operational mode;
- the calculation results, complete with thedrawing, dimensions and ordering key forthe selected radiator convector areavailable in the printout form.
RADIATOR CONVECTORS
Natural convection
Software Klima RK
-
8/11/2019 Klima Produkti
67/7863
-
8/11/2019 Klima Produkti
68/7864
FLOOR CONVECTORS
Natural Convection Floor Convectors TK/08
Forced Convection Floor Convectors TKV/08
Cooling and Heating Floor Convectors TKH
Floor convector for humid conditions with forced or natural convection TKV-S/08, TK-S/08
Software Kima TK
FLOOR CONVECTORSApplication:Floor convectors are modern heating bodiesdesigned for primary heating, as well as forsecondary heating, combined with otherprimary heating bodies (radiators, oorheating, fan convectors, air conditioningdevices, etc.). They are suitable for the heatingof rooms with large glazing surfaces: carshowrooms, winter gardens, apartments,business, shopping and similar premises. Inaddition to their heating function, their furtherimportant functions are the prevention ofcondensation build-up on glazing, and fending-off inlet of cold air into the room.
Natural Convection Floor Convectors TK/08Natural convection oor convectors principleof operation is natural air convection. They aredesigned for secondary room heating. Theirheating capacities range from 0.09 kW to3,7 kW, depending on the convector size. Theyare distinguished for their silent operation.
Forced Convection Floor Convectors TKV/08TKV/08 oorconvectorsprincipleof operationis forced convection, i.e. natural air circulationis boosted by means of a fan. They are suitableboth for primary and secondary heating ofrooms, in applications requiring higher heatingcapacities. The heating capacity is a functionof the convector size, and ranges from 0.13kW to 10.5 kW.
Floor convector for humid conditions withforced or natural convection TKV-S/08, TK-S/08TKV-S/08, TK-S/08 oor convectors operatewith forced TKV-S/08 or natural TK-S/08
convection. They are particularly suitablefor heating of areas with increased level ofhumidity such as swimming pools or similar. Atthe forced convection version, the low voltage(12V) ventilation fan is installed due to securityreasons. Due to increased level of humidity,condensation collection tray is installed.Heating power range is between 0.13 kW and4.3 kW and depends on convection type andthe size of the convector.
Cooling and Heating Floor Convectors TKHIn summer, the TKH oor convector draws inwarm air from the areas around windows orhot walls, cools it in the heat exchanger, andfeeds it back into the room. This reduces heat
gains due to heat room envelope surfaces.In the cooling process, a part of moisture isextracted from the air; this dehumidicationalso contributes to thermal comfort. TheTKH total cooling capacity range is 0.4 kWto 1.7 kW. In winter, the TKH oor convectoris applied for heating like any other oorconvector: it heats cold air from the windowarea and returns it into the room. The TKHheating capacity range is 0.9 kW to 4.2 kW.
SOFTWARE KLIMA TKThe package allows the selection of a standardheating oorconvector (TK/08, TKV/08 andTKH types) either according to a speciedconvector length or a specied thermalcapacity. Upon the entry of basic parameters,the package lists the corresponding convectortypes with all available accessories. Theconvector type listing is a ready to-use orderingkey. The nal calculation canbe printed, todocument the calculation results along with allinput parameters and technical characteristics.
-
8/11/2019 Klima Produkti
69/7865
-
8/11/2019 Klima Produkti
70/7866
INDUSTRIAL FAN-HEATERS UNIKAL
Application and operationAir heaters are devices used for heating,cooling, ventilation and ltration in variousfacilities such as production halls, workshops,hangars, warehouses, garages and similar
spaces. They function on the principle offorced air circulation over a heat exchanger bymeans of an axial fan.
Models, designs and sizesWe manufacture a wide range of models fortwo-pipe systems:- model for the circulation of (internal)air only,
- model for mixing circulation and external(fresh) air,
- model for external air only,- all models are manufactured in ve sizes: 140, 250, 400, 650 and 1000,- heat exchangers with a 2- and 3-rowwater heater, a 2-row steam heater, a4-row heater/cooler and a 6-row coolerare built in.
The main advantages of the UniKalindustrial fan-heater- high heating and cooling powers: a heatingpower of 5kW to 140 kW and a coolingpower of 3,5 kw to 45 kW,
- one-phase and three-phase axial fans,- regulation using various regulators andswitches,
- the heat exchangers are made of aluminiumpressed lamellas on mechanically expandedpipes, which ensures good contact betweenthe pipes and the lamellas to provide anefcient heat transfer,
- the housing is painted with the standard RAL9006; if the customer chooses, another RALchart colour can be used,
- individually adjustable blades are made ofanodised aluminium,
- easy lter replacement
-
8/11/2019 Klima Produkti
71/7867
-
8/11/2019 Klima Produkti
72/7868
-
8/11/2019 Klima Produkti
73/7869
Solar systems
9
-
8/11/2019 Klima Produkti
74/7870
SOLAR SYSTEMS
SOLAR SYSTEMSApplicationSolar collectors are used for heating sanitarywater, water in indoor and outdoor swimmingpools, in greenhouses, for drying agriculturalproducts, timber and the like as well as
for low-temperature building heating (oorwarming) or for combined heating with otherenergy sources (classical heating systems,heat pumps).
A solar heating set- solar energy collector- support structure for roof mounting - thermal reservoir (heat storage tank)- control elements- pump unit- expansion reservoir
Collector typesWe manufacture two types of solarcollectors:- SI-SOL 2.0-TI- SI-SOL 1.4-TIThey are both built from the same highquality materials and differ only in size ofabsorption area 1,4 m 2 and 2 m 2.
Characteristics- high quality of materials- high efciency- excellent efciencydue to TINOX coating - modular construction in bigger units
- suitable for horizontal and vertical mounting - attests, certicatesand recognitionsof foreign and home institutes: SPF, ITW, LOSand ZMRK
- favorable proportion between price andquality
- long life expectancy - over 25 years- warranty for 5 years
SoftwareThe sIMPly application is designed for basicsizing of the solar collector sanitary waterheating systems and for cost estimation.
SI-SOL
Control
Thermal reservoir
Solar system
-
8/11/2019 Klima Produkti
75/7871
-
8/11/2019 Klima Produkti
76/7872
an annual forum with international participation including lecturers and an audience dealing with the latest ndings, guidelines, challenges, and dilemmas of the global and european HVAC industry
Slovenian Klima Forum
creating new innovative products and solutions to suit customer needs
demonstrating the product operation and modelling of required solutions
expanding the knowledge and education for all HVAC system operating levels
linking with universities, companies, domestic and foreign research institutions
active membership in international professional organizations (REHVA, EUROVENT, IRR, ASHRAE) andnational HVAC associations (SITHOK and SDHK Slovenia, AVOK Russia, SPW Poland, and others)
Academy of Knowledge
-
8/11/2019 Klima Produkti
77/78
Innovationcombinedwith
tradition
Innovative solutions
Flexibility
Reliability
Individual creativitywithin team work
Creating innovativeproducts and solutions
Tested and guaranteedquality and functionality
HVAC R&D centre with modern laboratory facilities
Hidria Institute Klima
-
8/11/2019 Klima Produkti
78/78
Contact us:
Hidria IMP Klima d.o.o. BU KlimaGodovi 150SI-5275 Godovi, SloveniaT: +386 5 37 43 000F: +386 5 37 43 082E:klima@hidria.comwww.hidria.com
BU Air handling units, Cooling andControl systemsBU Heat exchangersV jk 58
Hidria Institute Klima d.o.o.Godovi 150SI-5275 Godovi, SloveniaT: +386 5 37 74 400F: +386 5 37 74 426E: institut-klima@hidria.comwww.hidria.com
Sales companies abroad:
Bosnia and Herzegovina:Hid i BH d
Portugal:Keio LdaRua Dr. Emidio Guilherme GarciaMendes, lote 23 D, Amora2845-608 Amora PortugalT: +351 21 226 92 64F: +351 21 225 54 25E: keio@sapo.ptwww.hidria-keio.com
Bulgaria:Hidria Bulgaria EOOD86, Georgi Rakovski Street,entrance A, oor 3BG-1000 SoaT +359 29 802 018
Macedonia:Hidria d.o.o.e.l. SkopjeSole Stojev 2 1/15MK-1000 SkopjeT: +389 02 3078 035F: +389 02 3078 035E: mcming@t-home.mk
Representatives and technicalofces :Russia:Hidria MoscowSrednyaya Pereyaslavskaya Street 14,b ild 1 f 15 16
Hidria IMP Klima Slovenia
Uniklima, SarajevoBosnia and
HerzegovinaGIF FreiburgGermany Hidria Ineniring Slovenia
Hidria InstituteKlima,
Slovenia
Hidria BH
Bosnia andHerzegovina
HVAC products and systems HVAC components Ventilated ceilingsfor large kitchensAutomation,
Central ControlSystems
Research &Development
Hidria Beograd Serbia
Hidria PolskaPoland
Hidria MoscowRussia
KlimaHidriaPortugal
GIF CZ PragueCzech Republic
Production Engineering R & DSales
companies / divisions
Air conditioning
Fans
Fire protection
Clean room technology
Control systems
Heat exchangers
Air handling units
Cooling technique
Convector units Hidria SoaBulgaria
Representativeofce Hidria
Kosovo
Hidria PodgoricaMontenegro
Hidria SkopjeMacedonia
Service &Maintenance
EnergyEngineering
top related