kv=141-position loop gain [1/s],visionair-browser.g-scop.grenoble-inp.fr/visionair... · web...
Post on 08-May-2020
4 Views
Preview:
TRANSCRIPT
Project funded by the European Commission under grant agreement n°262044
PUT-Poznan: TNA-Project-159- Modeling of CNC milling machine feed drive in Matlab-Simulink and its visualization in Virtual Reality
Proposer: Prof. Dr. Zoran PANDILOV, University "Sv. Kiril i Metodij"-Skopje, Faculty of Mechanical Engineering, Republic of Macedonia
Visited institutions: Department of Mechatronic Devices and Virtual Reality Laboratory at Poznan University of Technology, Poland
Visit Dates: 02.06.2014-02.07.2014
During my research stay I was hosting by professor Dr. hab. inż. Andrzej Milecki and his research team: Mgr inż. Amadeusz Nowak, mgr inż. Damian Grajewski and Dr. inż. Filip Górski. The research was very complex and divided in two phases.
The first phase was modelling of the very complex models of the portal 3-axis CNC milling machine feed drives which consist of many elements (position, velocity and current control regulators, actuators, mechanical transmission elements, etc.). All these elements have great influence on the machine tool important parameters like movement stability, positioning accuracy and dynamic stiffness. The modeling was done with Matlab-SIMULINK and Sim Scape. The Sim Scape Toolbox allowed us to use the complete CAD model of the geometry of the machine tool in modeling and automatically calculating the selected properties.
1
den(s)
Transfer Fcn3
Kp*Tn.s+Kp
Tn.s
Transfer Fcn2
1
Te.s+1
Transfer Fcn1
x
To Workspace1
t
To Workspace
Sum5 Sum2Sum1Step Input
1/s
Integrator2
1/s
Integrator1-K-
Gain5
-K-
Gain4 -K-
Gain3
-K-
Gain2
-K-
Gain1
Disturbance force
Clock
Auto-ScaleGraph
Fig. 1 CAD model of the machine tool Fig. 2 Simulink model of position and velocity loop for one axis feed drive
The influence of changing and optimization of several feed drives parameters (position loop gain Kv, proportional gain Kp of the velocity controller, integral gain of velocity controller-Tn, electrical drive time constant Te, total moving mass m, sampling period Ts, etc.) on positioning accuracy and dynamic stiffness were simulated, tested and validated.
The ready Matlab-Simulink and Sim Scape models were initially visualized in the Matlab program, but they were very simplified, comparing their visualization in Virtual Reality EON Studio program.
NS
Leadscrew
PVC
R
Ideal Translational Motion SensorMass
Mechanical Translational Reference
Mechanical Rotational Reference
RC
S
Ideal Torque Source
S PS
Simulink-PS Converter
SPS
PS-Simulink Converter
f(x)=0
Solver Configuration
SPS
PS-Simulink Converter1
AWC
R
Ideal Rotational Motion Sensor
Mechanical Rotational Reference1
RCS
Ideal Force Source
Mechanical Translational Reference1S PS
Simulink-PS Converter1
InertiaSPS
PS-Simulink Converter2
SPS
PS-Simulink Converter3
1
Torque [Nm]
2
Disturbance Force [N]
1
Angle [rad]
2
Rotational Velocity [rad/s]
3
Position [m]
4
Velocity [m/s]
Fig. 3 Sim Scape model of mechanical elements of y-axis of portal CNC machine tool1
Angle [rad]
2Rotational Velocity [rad/s]
t
To Workspace
Step Input3
Clock
Y
X
Z
Os_Y
Os_X
Os_Z
Signal_transform
Saturation
Saturation1
Saturation2
-1
Gain9
-1
Gain10
u+b
Bias
u+b
Bias1
u+b
Bias2
CNC_Milling_Machine_Visualisation
-K-
Gain11
Sine Wave2
3Angle [rad]1
4Rotational Velocity [rad/s]1
Step Input4
Sine Wave3
-K-
Gain7
-K-
Gain8
5
Angle [rad]2
6Rotational Velocity [rad/s]2
Step Input6
Sine Wave5
-1
Gain15
In1
Angle [rad]Rotational Velocity [rad/s]
Out3Out4Out5
Subsystem
In1
Out1
Angle [rad]1
Rotational Velocity [rad/s]1
Out4
Subsystem1
In1
Out1Angle [rad]2
Rotational Velocity [rad/s]2Out4Out5
Subsystem2
Fig 4. Complete model of CNC portal machine tool feed drives (x, y and z axis) with simple visualisation in SIMULINK
The second phase of the research was visualization of the whole machine tool using the CAD model of machine tool and models of the feed drives developed in Matlab-Simulink and Sim Scape in Virtual Reality system with EON Studio software. The using of EON software significantly improved the model and visualization quality.
With the visualization we were able to simulate the real work of the whole CNC machine tool (contouring operations, changing tools, etc.)
Fig.5 Visualisation of the whole CNC portal milling machine in machine EON Studio software
Fig.6 Presentation of the finished project
This whole research could be very useful to machine tool producers, because they could change their practice of making very expensive real prototypes of the CNC machine tools, with creating virtual prototypes of machines.
Leaving the Poznan University of Technology, Department of Mechatronic Devices, I am deeply convinced, that my finished TNA VISIONAIR project, will be only a start of a long term collaboration in research, scientific and educational issues with my host institution and host institution colleagues.
Proposer of the project: Host: Prof. Dr. Zoran PANDILOV Prof. Dr. hab. inż. Andrzej MILECKI
top related