level 2 wall mount charger l2 wall mount... · 2020. 6. 25. · easily programmable start/stop...

Electric Vehicle Supply Equipment (EVSE) provides the transfer of electrical energy from the utility to the vehicle. Level 2 charging (240 volt AC input) is the primary and preferred method for charging vehicles in residential and commercial facilities. The ECOtality design provides intelligent user-friendly features to easily and safely charge electric vehicles.

Simply Smart Wall Mount Design

Level 2 Wall Mount Charger

Benefits of ECOtality’s Unique Binary Wall Mount Design

Simplifies the installation processConvenient configuration for a wide variety of physical layoutsEasy to use, ADA compliantConvenient cable management for long reach and storage between usesConnector holster for protection and storageIntuitive connector docking

••••

••

J1772 Standard EV ConnectorThe SAE J1772 is the standard for electric vehicle charging in the United States.

Ergonomic designPrevents accidental disconnectionGrounded pole - first to make contact, last to break contactDesigned for over 10,000 cyclesCan withstand being driven over by a vehicleSafe in wet or dry use

••••••

Energy MeterInternal meter to monitor energy and demand usageSupports energy usage data evaluationSupports electric utility EV billing when certified to ANSI 12.20 and IEC standards

•••

Touch ScreenConvenient, user-friendly touch screen displayCharge statusCharge statistics and historyEasily programmable start/stop timing allows coordination with electric utility on/off peak time of use ratesFind charging stations away from home - Not part of the EVSE UI

••••

•

Simply smarter.

Proven technology and reliable safetyFeatures

Charge circuit interruption device (CCID) with automatic testGround monitoring circuitNuisance-tripping avoidance and auto re-closureCold load pickup (randomized auto-restart following power outage)Certified energy and demand meteringWireless IEEE 802.11gLAN capableZigBee SEP 1.0 capableAMI interface capableWeb-based bi-directional data flowCord management system

•••••••••••

Additional FeaturesSmart Phone Applications for status charges and notification of completion or interruption of chargeControllable output to support utility demand response requestsMultiple input current settings to conveniently accommodate electric service capabilitiesCommunication systems, multiple modes of communications including wireless, cellular, LAN and Zigbee

•

•

•

•

SafetyInterlocks with EV drive system so EV cannot drive when connector is inserted in vehicle inletDe-energizes EVSE if connector and cable are subjected to strainCharge current interrupting device (CCID) with automatic test feature for personal protectionConnector parts are de-energized until latched in vehicle inletMeets all National Electric Code requirements

•

•

•

•

•

Standards and CertificationsSAE J1772 compliantNEC article 625 electric vehicle charging systemUL and ULc to 2594

••

•

ECOtality’s Blink Level 2 Electric Vehicle Supply Equipment (EVSE) Specifications

Input VoltageInput PhaseFrequency

Input CurrentBreaker Size

Output VoltageOutput Phase

PilotConnector/Cable

Cable LengthExterior Dimensions

Temperature RatingEnclosureMounting

208 VAC to 240 VAC +/- 10%Single50/60 Hz30 Amps (maximum); 12A, 16A, 24A available40 Amps; settings at 15A/20A/30A available208 VAC - 240 VAC +/- 10%SingleSAE J1772-compliantSAE J1772-compliant; UL-rated at 30A maximum18 feet (estimated)Wall Mount: 18” W x 22” H x 5-9/16” DCord Mount: 18” Diameter-22o F (-30o C) to +122o F (+50o C)NEMA Type 3R; sun-and-heat-resistantWall-mount or pedestal