list of is standards
Post on 29-Nov-2015
225 Views
Preview:
DESCRIPTION
TRANSCRIPT
भारतीय मानक ब यू रो,
मानक भवन, 9, बहादरु शाह जफर मार्ग
नई ददल ली –110 002
BUREAU OF INDIAN STANDARDS
MANAK BHAVAN, 9, BAHADUR SHAH ZAFAR MARG
NEW DELHI – 110 002
कायग योजना
(१५ जू न , २०१३ तक)
PROGRAMME OF WORK
(AS ON 15 JUNE, 2013)
ववद्युत तकनीकी ववभार्
(ईटी डी) ELECTROTECHNICAL
DEPARTMENT (ETD)
PREFACE
The program of work is prepared by all divisions of Bureau of Indian Standards to
indicate the latest position of published standards and draft standards at different stages
of processing. This has been prepared Sectional Committee-wise as on 15 June, 2013 and
arranged in the sequential order of the committee number.
This document covers the programme of work of Electrotechnical Division Council
(ETDC) with its scope as under:
“Standardization in the field of electrical power generation, transmission, distribution and
utilization equipment, and insulating materials, winding wires, measuring and process
control instruments and primary and secondary batteries”.
For the convenience of the users, the content page includes the list of Sectional
Committees together with the corresponding Technical Committees of IEC/ISO. It may
be mentioned that the work under Electrotechnical Division Council closely follows the
international standardization work under the International Electrotechnical Commission
(IEC).
This document covers designation of the Sectional Committee, its scope, number and title
of the published/draft standards, date of reaffirmation, No. of amendments issued, etc.
An ‘*’ before IS No. has been used to indicate that the standards is under revision.
Wherever, below IS number, ‘ISO/IEC number is given, it indicates the ISC/IEC
Standards has been adopted under dual numbering system.
In addition to general series of Indian Standards designated by ‘IS’, this document also
covers special series of publications designated by ‘SP’.
This publication also contains the following Annexes:
a) Annex 1- List of standards withdrawn/superseded
b) Annex 2- List of Equivalent Standards
c) Annex 3- Bilingual Standards
d) Annex 4- Aspect wise Classification of Standards
We have tried our level best to provide this information. Any suggestions for
improvement are always welcomed.
For any information, please write to:
SCIENTIST ‘F’ and HEAD
ELECTROTECHNICAL DEPARTMENT (ETD)
BUREAU OF INDIAN STANDARDS
MANAK BHAWAN, 9 B.S. ZAFAR MARG
NEW DELHI-110002
Email – eetd@bis.org.in, Phone – 011 23231192
CONTENTS
COMMITTEE TITLE PAGE ETD 01 BASIC ELECTROTECHNICAL STANDARDS 1
ETD 02 SOLID ELECTRICAL INSULATING MATERIALS AND
INSULATING SYSTEMS
6
ETD 03 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS 16
ETD 06 ELECTRICAL INSULATORS AND ACCESSORIES 19
ETD 07 LOW VOLTAGE SWITCHGEAR & CONTROLGEAR 22
ETD 08 HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR 25
ETD 09 POWER CABLES 28
ETD 10 PRIMARY CELLS AND BATTERIES 35
ETD 11 SECONDARY CELLS AND BATTERIES 36
ETD 12 MEASURING EQUIPMENT FOR BASIC ELECTRICAL
QUANTITIES
39
ETD 13 EQUIPMENT FOR ELECTRICAL ENERGY
MEASUREMENT AND LOAD CONTROL
42
ETD 14 ELECTRICAL WIRING ACCESSORIES 44
ETD 15 ROTATING MACHINERY 47
ETD 16 TRANSFORMERS 53
ETD 18 INDUSTRIAL PROCESS MEASUREMENT AND CONTROL 56
ETD 19 HIGH VOLTAGE ENGINEERING 62
ETD 20 ELECTRICAL INSTALLATIONS 64
ETD 21 ELECTRIC WELDING EQUIPMENT 68
ETD 22 ELECTRICAL APPARATUS FOR EXPLOSIVE
ATMOSPHERES
69
ETD 23 ELECTRIC LAMPS AND THEIR AUXILIARIES 73
ETD 24 ILLUMINATION ENGINEERING AND LUMINAIRES 77
ETD 25 LIFTS AND ESCALLATORS 81
ETD 28 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS 83
ETD 29 POWER CAPACITORS 86
ETD 30 SURGE ARRESTERS 88
ETD 31 POWER ELECTRONICS 89
ETD 32 ELECTRICAL APPLIANCES 91
ETD 33 WINDING WIRES 97
ETD 34 INSTRUMENT TRANSFORMERS 102
ETD 35 POWER SYSTEMS RELAYS 104
ETD 36 TOOLS AND EQUIPMENT FOR LIVE WORKING 108
ETD 37 CONDUCTORS AND ACCESSORIES FOR OVERHEAD
LINES
110
ETD 39 FUSES 112
ETD 40 HVDC POWER SYSTEMS 114
ETD 42 WIND TURBINES 115
ETD 43 STANDARDIZATION OF ENVIRONMENTAL ASPECTS
FOR ELECTRICAL AND ELECTRONIC PRODUCTS
116
ETD 44 SAFETY OF MACHINERY- ELECTROTECHNICAL
ASPECTS
Newly
Formed
ANNEX 1 LIST OF STANDARDS WITHDRAWN/SUPERSEDED
ANNEX 2 LIST OF EQUIVALENT STANDARDS
ANNEX 3 BILINGUAL STANDARDS
ANNEX 4 ASPECTWISE POSITION OF STANDARDS
SCOPE -
ETD 1 BASIC ELECTROTECHNICAL STANDARDS
To prepare standards of general and common nature in the field of electrotechnology, such as voltages, current ratings and frequency, quantities and units, nomenclature,graphical symbols, basic marking and general requirements for enclosures of equipment.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Jul 2012 2IS 1885(Part 1):1961 Electrotechnical vocabulary: Part 1 Fundamental definitions
2 Jul 2012IS 1885(Part 9):1992
/ IEC 60050(446):1983
Electrotechnical Vocabulary: Part 9 Electrical relays (second revision)
3 IS 1885(Part 10):2008
/ IEC 60050(448):1995
Electrotechnical Vocabulary: Part 10 Power system protection (second revision)
4 Jul 2012IS 1885(Part 11):1966 Electrotechnical vocabulary: Part 11 Electrical measurements
5 Jul 2012IS 1885(Part 14):1967 Electrotechnical vocabulary:Part 14 Nuclear power plants
6 IS 1885(Part 15):2008
/ IEC 60050(482):2004
Electrotechnical vocabulary: Part 15 Primary and secondary cells and batteries (second revision) [Amalgamating IS 1885(Part 8):1986]
7 Jul 2012IS 1885(Part 16/Sec 1):1968 Electrotechnical vocabulary: Part 16 Lighting, Section 1 General aspects
8 Jul 2012IS 1885(Part 16/Sec 2):1968 Electrotechnical vocabulary: Part 16 Lighting, Section 2 General illumination, lighting fittings and lighting for traffic and signalling
9 Jul 2012IS 1885(Part 16/Sec 3):1967 Electrotechnical vocabulary: Part 16 Lighting, Section 3 Lamps and auxiliary apparatus
10 Jul 2012IS 1885(Part 17):1979 Electrotechnical vocabulary: Part 17 Switchgear and controlgear (first revision)
11 IS 1885(Part 27):2008
/ IEC 60050(551):1998
Electrotechnical Vocabulary: Part 27 Power electronics (Third Revision)
12 Mar 2009IS 1885(Part 28):1993
/ IEC 60050(321):1986
Electrotechnical vocabulary: Part 28 Instrument transformers (first revision)
13 Jul 2012IS 1885(Part 29):1971 Electrotechnical vocabulary: Part 29 Mining terms
14 Jul 2012IS 1885(Part 30):1971 Electrotechnical vocabulary: Part 30 Overhead transmission and distribution of electrical energy
15 Mar 2009IS 1885(Part 32):1993
/ IEC 60050(461):1984
Electrotechnical Vocabulary: Part 32 Electric cables (first revision)
16 Jul 2012IS 1885(Part 34):1972 Electrotechnical vocabulary: Part 34 Cinematography
17 Mar 2009IS 1885(Part 35):1993
/ IEC 60050(411):1996
Electrotechnical vocabulary: Part 35 Rotating machinery (first revision)
18 Mar 2009IS 1885(Part 37):1993
/ IEC 60050(691):1973
Electrotechnical vocabulary: Part 37 Tariffs for electricity (first revision)
1
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 Mar 2009IS 1885(Part 38):1993
/ IEC 60050(421):1990
Electrotechnical vocabulary: Part 38 Power transformers and reactors(second revision)
20 Mar 2009IS 1885(Part 42):1993
/ IEC 60050(436) :1990
Electrotechnical Vocabulary: Part 42 Power capacitors (second revision)
21 Jul 2012IS 1885(Part 43):1977 Electrotechnical vocabulary: Part 43 Electrical equipment used in medical practice
22 Jul 2012IS 1885(Part 49):1978 Electrotechnical vocabulary: Part 49 Industrial process measurement and control
23 IS 1885(Part 51):2012
/ IEC 60050-841:2004
Electrotechnical vocabulary: Part 51 Industrial electro-heating (Second Revision)
24 Jul 2012IS 1885(Part 53):1980 Electrotechnical vocabulary: Part 53 Mica (superseding IS:1174)
25 Mar 2009IS 1885(Part 54):1993
/ IEC 60050(471):1984
Electrotechnical Vocabulary: Part 54 Insulators (First revision)
26 Jul 2012IS 1885(Part 55):1981 Electrotechnical vocabulary: Part 55 Electric fans
27 May 2013IS 1885(Part 57):2008
/ IEC 60050(131):2002
Electrotechnical vocabulary: Part 57 Circuit Theory (Second Rrevision)
28 Mar 2009IS 1885(Part 60):1993
/ IEC 60050(426):1990
Electrotechnical Vocabulary: Part 60 Electrical apparatus for explosive atmospheres (first revision)
29 Jul 2012IS 1885(Part 61):1985 Electrotechnical vocabulary: Part 61 Nuclear medical instruments
30 Mar 2009IS 1885(Part 62):1993
/ IEC 60050(212):1990
Electrotechnical vocabulary: Part 62 Solid insulating materials (first revision)
31 Mar 2009IS 1885(Part 69):1993
/ IEC 60050(602):1983
Electrotechnical Vocabulary: Part 69 Generation, transmission and distribution of electricity - Generation
32 Mar 2009IS 1885(Part 70):1993
/ IEC 60050(604):1987
Electrotechnical Vocabulary: Part 70 Generation, transmission and distribution of electricity - operation
33 Mar 2009IS 1885(Part 71):1993
/ IEC 60050(605):1983
Electrotechnical Vocabulary: Part 71 Generation, transmission and distribution of electricity - Substations
34 May 2013IS 1885(Part 72):2008
/ IEC 60050 (101):1998
Electrotechnical Vocabulary : Part 72 Mathematics (First Revision)
35 IS 1885(Part 73):2012 Electrotechnical Vocabulary : Part 73 Physics and Chemistry [First Revision]
36 IS 1885(Part 74):2010
/ IEC 60050(151): 2001
Electroechnical Vocabulary: Part 74 Electrical and magnetic devices(First Revision)
37 IS 1885(Part 75):2012
/ IEC 60050-351 2006
Electrotechnical Vocabulary: Part 75 Automatic control (First Revision)
38 Mar 2009IS 1885(Part 76):1993
/ IEC 60050(431):1980
Electrotechnical vocabulary: Part 76 Transducers
39 Mar 2009IS 1885(Part 77):1993
/ IEC 60050(466): 1990
Electrotechnical Vocabulary: Part 77 Overhead lines
40 Mar 2009IS 1885(Part 78):1993
/ IEC 60050(601):1985
Electrotechnical Vocabulary: Part 78 Genereation, transmission and distribution of electricity - General
2
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
41 Mar 2009IS 1885(Part 79):1993
/ IEC 60050(603):1986
Electrotechnical Vocabulary: Part 79 Generation, transmission and distribution of electiricity - Power system planning and management
42 Mar 2009IS 1885(Part 80):1994
/ IEC 60050(301):1983
Electrotechnical vocabulary: Part 80 General terms on measurements in electricity
43 Mar 2009IS 1885(Part 81):1993
/ IEC 60050(302):1983
Electrotechnical vocabulary: Part 81 Electrical measuring instruments
44 Jul 2012IS 2032(Part 15):1976 Graphical symbols used in electrotechnology:Part 15 Aircraft electrical symbols
45 Jul 2012IS 2032(Part 19):1977 Graphical symbols used in electrotechnology:Part 19 Electrical equipment used in medical practice
46 Mar 2009IS 2032(Part 25):1980 Graphical symbols used in electrotechnology: Part 25 Electrical installations in ships
47 Mar 2009IS 3599:1966 Methods of measurement of cooling medium temperature for electrical apparatus
48 Jul 2012IS 3722(Part 1):1983
| IEC 60027-1(1992)
Letter symbols and signs used in electrical technology: Part 1 General guidance on symbols and subscripts(first revision)
49 Jul 2012IS 3722(Part 2):1983
| IEC 60273-1(92)
Letter symbols and signs used in electrical technology: Part 2 Reference tables for symbols and subscripts (first revision)
50 Mar 2011 1IS 5578:1984
| IEC 60391(1972)
Guide for marking of insulated conductors (first revision)
51 Mar 2013IS 7118:1973 Recommendations for direction of movement for control devices operating electrical apparatus
52 Mar 2009* IS 7691:1975
| IEC 600113-1(71)
Frequencies for special power applications
53 Mar 2009IS 8270(Part 1):1976
| IEC 60113-1(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 1 Definitions and classification
54 Mar 2009IS 8270(Part 2):1976
| IEC 60113-2(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 2 Item designation
55 Mar 2009IS 8270(Part 3):1977
| IEC 60113-2(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 3 General requirements for diagrams
56 Mar 2009IS 8270(Part 4):1977
| IEC 60113-2(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 4 Circuit diagrams
57 Mar 2009IS 8270(Part 5):1976
| IEC 60113-2(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 5 Interconnection diagrams and tables
58 Jul 2012IS 8270(Part 6):1983
| IEC 60113-2(71)
Guide for preparation of diagrams, charts and tables for electrotechnology: Part 6 Unit wiring diagrams and tables
59 Jul 2012IS 9409:1980
| IEC 61140 (2001)
Classification of electrical and electronic equipment with regard to protection against electric shock
60 Mar 2009IS 9499:1980
| IEC 60375(72)2003
Conventions concerning electric and magnetic circuits
61 Mar 2009IS 9676:1980 Reference ambient temperature for electrical equipment
3
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
62 Mar 2009IS 9677:1980 Guide for limits of temperature-rise of the windings of electrical equipment when tested by different methods
63 Mar 2009IS 9678:1980 Methods of measuring temperature rise of electrical equipment
64 Mar 2009IS 10381:1982 Terms (and their Hindi equivalents) commonly used for name plates and similar data of electrical power equipment
65 Jul 2012IS 10580:1983 Service conditions for electrical equipment
66 Jul 2012IS 11353:1985
| IEC 60445(1973)
Guide for uniform system of marking and identification of conductors and apparatus terminals
67 Jul 2012IS 11354:1985
| IEC 60152(63)
Guide for identification by hour numbers of the phase conductors of 3-phase electric systems
68 Mar 2009IS 11954:1987 Guide for colour coding of electrical mimic diagrams
69 Mar 2009IS 11955:1987
| IEC 60059(1999)
Preferred current ratings
70 Mar 2009IS 12032(Part 1):1987
/ IEC 60617-1(1985)
Graphical symbols for diagrams in the field of electrotechnology: Part 1 General information,general index,cross reference table
71 Mar 2009IS 12032(Part 2):1987
/ IEC 60617-2(1983)
Graphical symbols for diagrams in the field of electrotechnology: Part 2 Symbols elements, qualifying symbols and other symbols having general application
72 Mar 2009IS 12032(Part 3):1987
/ IEC 60617-3(1983)
Graphical symbols for diagrams in the field of electrotechnology:Part 3 Conductors and connecting devices
73 Mar 2009IS 12032(Part 4):1987
/ IEC 60617-4(1984)
Graphical symbols for diagrams in the field of electrotechnology: Part 4 Passive components
74 Mar 2009IS 12032(Part 6):1987
/ IEC 60617-6(1983)
Graphical symbols for diagrams in the field of electrotechnology: Part 6 Production and conversion of electrical energy
75 Mar 2009IS 12032(Part 7):1987
/ IEC 60617-7(1983)
Graphical symbols for diagrams in the field of electrotechnology: Part 7 Switchgear, controlgear and protective devices
76 Mar 2009IS 12032(Part 8):1987
/ IEC 60617-8(1983)
Graphical symbols for diagrams in the field of electrotechnology: Part 8 Measuring instruments, lamps and signalling devices
77 Mar 2009IS 12032(Part 11):1987
/ IEC 60617-11(1983)
Graphical symbols for diagrams in the field of electrotechnology: Part 11 Architectural and topographical installation plans and diagrams
78 Dec 2010 4IS 12360:1988
| IEC 60038(1983)
Voltage bands for electrical installations including preferred voltages and frequency (superseding IS:585)
79 Jun 2009IS 60529:2001
/ IS/IEC 60529:2001
Classification of Degrees of protection provided by enclosures (IP Code) (Superceding IS 12063:1987)
4
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 1(6365)
/ IEC 60050-300
Electrotechnical Vocabulary - Part 300 : Electrical and electronic easurements and measuring instruments Part 311: General terms relating to measurements Part 312: General terms relating to electrical measurements Part 313: Types of electrical measuring instruments Part 314: Specific terms according to the type of instrument
5
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 2 SOLID ELECTRICAL INSULATING MATERIALS AND INSULATION SYSTEMS
To prepare standards:a) on solid electrical insulating materials.b) on guiding principles and on the philosophy of evaluation of insulation systems in generalc) for functional test programmes and methods intended for evaluation of possible insulation systems and their suitability for use in electrical equipment.d) for classification of insulation systems based upon their capability to withstand the complex of the most important service determined by the conditions of the use of insulation in equipment.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Oct 2011IS 1175:1981
| ISO 67
Methods for grading and classification of muscovite mica blocks, thins and films (first revision)
2 IS 1271:2012
/ IEC 60085 (2007)
Electrical Insulation - Thermal Evaluation and designation (Second Revision)
3 Apr 2013 1IS 1576:1992 Solid pressboard for electrical purposes(first revision)
4 Oct 2010 1IS 2259:1963
| IEC 60167(1964)
Methods of test for determination of insulation resistance of solid insulating materials
5 Apr 2013IS 2260:1973 Preconditioning, conditioning and testing of solid electrical insulating materials (first revision)
6 Oct 2010 5IS 2448(Part 1):1963 Adhesive insulating tapes for electrical purposes:Part 1 Tapes with cotton textile substrates
7 Apr 2013 1IS 2464:1963 Built-up mica for electrical purposes
8 Oct 2011 1IS 2584:1963 Method of test for electric strength of solid insulating materials at power frequencies
9 Nov 2012IS 2824:2007
/ IEC 60112:2003
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (second revision)
10 Oct 2011 1IS 3352:1965 Varnished cotton cloth and tape for electrical purposes
11 Oct 2011IS 3396:1979 Methods of test for volume and surface resistivities of solid electrical insulating materials (first revision)
12 Apr 2013IS 4248:1967 Non-ignitable and self-extinguishing boards (with mineral base) for electrical purposes
13 Apr 2013 1IS 4249:1967 Classification and methods of tests for non-ignitable and self-extinguishing properties of solid electrical insulating materials
14 Apr 2013IS 4486:1967 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
15 Oct 2011IS 4819:1968 Thin vulcanized fibre sheet (including leatheroid) for electrical purposes - Specification
6
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 Oct 2011IS 4820:1968 Vulcanized fibre sheets for electrical purposes - Specification
17 Oct 2010IS 5596:1970 Method of test for determining deleterious substances in fibrous insulating materials
18 Apr 2013IS 5711:1970 Vulcanized fibre rods and tubes for electrical purposes
19 Apr 2013IS 6230:1970 Woven asbestos tape for electrical insulating purposes
20 Oct 2011IS 6659:1976 Electronic grade ceramic materials (first revision)
21 Mar 2013 1IS 7084:1973 Bitumen based filling compounds for electrical purposes
22 Oct 2010IS 7571:1974 Methods of tests for ceramic for telecommunication and allied purposes
23 Apr 2013IS 7755:1975 High tension insulating cotton tape impregnated with bitumen based compound
24 Apr 2013 2IS 7809(Part 1):1975
| IEC 60454-1(1974)
Pressure sensitive adhesive tapes for electrical purposes: Part 1 General requirements
25 Oct 2011 1IS 7809(Part 2):1977
| IEC 60454-2(1974)
Pressure sensitive adhesive tapes for electrical purposes: Part 2 Methods of test
26 Oct 2011 1IS 7809(Part 3/Sec 1):1986
| IEC 60454-2
Pressure sensitive adhesive tapes for electrical purposes: Part 3 Requirements for individual materials, Section 1 Plasticized polyvinylchloride tapes with non-thermosetting adhesive (first revision)
27 Oct 2011IS 7809(Part 3/Sec 2):1981 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 2 Requirements for polyester film tapes (PETP) with thermosetting adhesive
28 Oct 2011IS 7809(Part 3/Sec 3):1981 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 3 Polyester film tapes (PETP) with non-thermosetting adhesive
29 Apr 2013IS 7809(Part 3/Sec 4):1977 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 4 Cellulosic paper, creped with thermosetting adhesive
30 Oct 2011IS 7809(Part 3/Sec 5):1977 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 5 Cellulosic paper with thermosetting adhesive
31 IS 8504(Part 1):2013 Electrical insulating materials properties of thermal endurance Part 1: Ageing procedures and evaluation of test results (Second Revision)
32 IS 8504(Part 2):2013
| IEC 60216-2(2005)
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (First Revision)
33 IS 8504(Part 3):1994
| IEC 60216-3
Guide for determination of thermal endurance properties of electrical insulating materials Part 3 : Statistical methods
7
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
34 IS 8504(Part 4):2013
| IEC 60216-3(2006)
Electrical insulating materials - Thermal endurance properties - Part 4: Instructions for calculating thermal endurance characteristics (First Revision)
35 IS 8504(Part 5/Sec 1):2012
| IEC 60216-4-1(2006)
Electrical insulating materials - Thermal endurance properties - Part 5 Ageing ovens Sec 1 Single-chamber ovens
36 IS 8504(Part 5/Sec 2):2012
| IEC 60216-4-2(2000)
Electrical insulating materials - Thermal endurance properties - Part 5: Ageing ovens Sec 2 Precision ovens for use up to 300 °C
37 IS 8504(Part 5/Sec 3):2012
| IEC 60216-4-3(2000)
Electrical insulating materials - Thermal endurance properties - Part 5 Ageing ovens Sec 3 Multi-chamber ovens
38 IS 8504(Part 6):2012
| IEC 60216-5(2008)
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of relative thermal endurance index (RTE) of an insulating material
39 2001IS 8504(Part 7):2012
| IEC 60216-6(2006)
Electrical insulating materials - Thermal endurance properties - Part 7 : Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
40 IS 8516:2011
/ IEC 60426(2007)
Electrical Insulating materials – Determination of electrolytic corrosion caused by insulating materials – Test methods (First Revision)
41 Oct 2011IS 8570:1977 Press paper for electrical purposes
42 Oct 2011IS 9043:1979
| ISO 444(1965)
Method for grading (by size) of phlogopite mica blocks, thins and splittings
43 Oct 2011IS 9044:1979
| ISO 5972(1978)
Method of measuring thickness of mica blocks, thins, films and splittings
44 Oct 2011IS 9045:1979
| ISO 5023(1977)
Thermal classification of phlogopite mica splittings
45 Oct 2011 1IS 9335(Part 1):1979
| IEC 60554-1(1977)
Cellulosic papers for electrical purposes: Part 1 Definitions and general requirements
46 Oct 2011IS 9335(Part 2):1998
/ IEC 60554-2(2001)
Cellulosic papers for electrical purposes: Part 2 Methods of test (superseding IS:2188)
47 Oct 2011 1IS 9335(Part 3/Sec 1):1984
| IEC 60554-3-1
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 1 General purposes electrical paper
48 Oct 2011IS 9335(Part 3/Sec 2):1985
| IEC 60554-3-2
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 2 Capacitor paper
49 Oct 2011IS 9335(Part 3/Sec 3):1984
| IEC 60554-3-3(1980)
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 3 Crepe paper
50 Oct 2011IS 9335(Part 3/Sec 4):1984
| IEC 60554-3-4(1979)
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 4 Electrolytic capacitor paper
51 Oct 2011 1IS 9335(Part 3/Sec 5):1985
| IEC 60554-3-5
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 5 Special papers
52 Oct 2011 1IS 9455:1980 Classification of muscovite mica blocks, thins and films based on electrical properties
8
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
53 Oct 2011IS 9502:1980
| ISO 5816-1(1979)
Muscovite mica components for electronic equipment
54 IS 9947:2011
/ IEC 60587(2007)
Electrical Insulating materials used under severe ambient conditions – Test methods for evaluating resistance to tracking and erosion (First Revision)
55 May 2013* IS 10026(Part 1):1998
| IEC 60464-1(1976)
Insulating varnishes containing solvents: Part 1 Definitions and general requirements (first revision)
56 Aug 2009* IS 10026(Part 2):1999
| IEC 60464-2(19860
Insulating varnishes containing solvents: Part 2 Methods of tests(first revision)
57 Feb 2009* IS 10026(Part 3/Sec 1):1999
| IEC 60464-3-1(1986)
Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section1Requirements for cold curing varnishes(first revision)
58 Jan 2009* IS 10026(Part 3/Sec 2):1999
| IEC 60464-3-2(1989)
Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 2 Requirements for hot curing varnishes(first revision)
59 Oct 2011 1IS 10026(Part 3/Sec 3):1983 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 3 Air drying varnishes with temperature index 130
60 Oct 2011 1IS 10026(Part 3/Sec 4):1983 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 4 Baking varnishes with temperature index 120
61 Oct 2011 1IS 10026(Part 3/Sec 5):1983 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 5 Baking varnishes with temperature index 130
62 Oct 2011 1IS 10026(Part 3/Sec 6):1983 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 6 Baking varnishes with temperature index 155
63 Oct 2011 1IS 10026(Part 3/Sec 7):1983 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 7 Baking varnishes with temperature index 180
64 Apr 2013IS 10026(Part 3/Sec 8):1986 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 8 Baking varnishes with temperature index 200
65 Apr 2013IS 10026(Part 3/Sec 9):1986 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 9 Baking varnishes with temperature index 130 for magnetic core sheets
66 Apr 2013IS 10163(Part 1):1982
| IEC 60377-1(1973)
Recommended methods of tests for the determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1 General
67 Oct 2010 1IS 10192:1982 Synthetic resin bonded glass fibre (SRBGF) sheets for electrical purposes
68 Apr 2013IS 10333:1982 Epoxy resin systems for cast resin insulated power and control cable joints and terminations upto and including 11 kV
69 Oct 2010IS 10581:1983
| IEC 60589(1977)
Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids
70 Oct 2011IS 11182(Part 1):1984
| IEC 60505(1975)
Guide for evaluation of insulation systems of electrical equipment: Part 1 Identification, evaluation and ageing mechanisms
9
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
71 Oct 2011IS 11182(Part 2):1984
| IEC 60611(1978)
Guide for evaluation of insulation systems of electrical equipment: Part 2 Thermal endurance test procedure
72 Oct 2011IS 11182(Part 3/Sec 1):1986
| IEC 60727-1(1982)
Guide for evaluation of insulation systems of electrical equipment: Part 3 Electrical endurance test procedures, Section 1 General considerations and evaluation procedures based on normal distributions
73 Oct 2011IS 11182(Part 3/Sec 2):1996
| IEC 60727-2(1993)
Guide for evaluation of insulation systems of electrical equipments: Part 3 Electrical endurance test procedures Section 2 evaluation procedure based on extreme value distribution
74 Dec 2008IS 11182(Part 5):1993
/ IEC 60941(1988)
Guide for evaluation of insulation system of electrical equipment: Part 5 Mechanical endurance functional tests
75 Oct 2011IS 11182(Part 6):1986 Guide for evaluation of insulation systems of electrical equipment: Part 6 Performance evaluation based on service experience and functional tests
76 Oct 2011IS 11182(Part 7/Sec 1):1986 Guide for evaluation of insulation systems of electrical equipment: Part 7 Multifactor functional testing, Section 1 Test procedures
77 Oct 2011IS 11221:1984
| IEC 60343(1970)
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
78 Oct 2011IS 11256(Part 1):1985
| IEC 60370(1971)
Method of test for determination of thermal endurance of insulating varnishes: Part 1 Electric strength method
79 Oct 2011IS 11256(Part 2):1985 Method of test for determination of thermal endurance of insulating varnishes: Part 2 Measurement of loss of mass
80 Oct 2011IS 11256(Part 3):1985
| IEC 60290(1969)
Methods of test for determination of thermal endurance of insulating varnishes: Part 3 Bond strength by helical coil method
81 Oct 2011 1IS 11297(Part 1):1985 Varnished fabrics for electrical purposes: Part 1 Definitions and general requirements
82 Oct 2010IS 11297(Part 2):1988 Varnished fabrics for electrical purposes: Part 2 Methods of tests
83 Oct 2010IS 11297(Part 3/Sec 1):1988 Varnished fabrics for electrical purposes: Part 3 Specifications for individual materials, Section 1 Glass fabric backed varnished fabrics
84 Oct 2011IS 11298(Part 1):1985
| IEC 60674-1(1980)
Plastic films for electrical purposes: Part 1 Definitions and general requirements
85 Jan 2009IS 11298(Part 2):1999
/ IEC 60674-2(1988)
Plastic films for electrical purposes: Part 2 Methods of test (first revision)
86 Oct 2010IS 11298(Part 3/Sec 1):1991 Plastic films for electrical purposes: Part 3 Specifications for individual materials, Section 1 Polypropylene film for capacitors (first revision)
87 Jan 2009IS 11298(Part 3/Sec 2):1999 Plastic films for electrical purposes: Part 3 Specifications for individual materials, Section 2 Metallized polypropylene films
88 Jul 2008IS 11298(Part 3/Sec 3):1998
/ IEC 60674-3-2 (1992)
Plastic films for electrical purposes:Part 3 Specifications for individual materials,Section 3 Requirements for balanced biaxially oriented Polyethylene Terephalate(PET) films used for electrical insulation
10
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
89 Jul 2008IS 11298(Part 3/Sec 4):1998
/ IEC 60674-3-3(1992)
Plastic films for electrical purposes: Part 3 Specification for individual materials, Section 4 Requirements for polycabonate (PC) films used or electrical insulation
90 Jul 2008IS 11298(Part 3/Sec 8):1998
/ IEC 60674-3-7(1992)
Plastic films or electrical purposes: Part 3 Specification for individual materials, Section 8 Requirements for fluoroethylene (FEP) films used for electrical insulation
91 Jul 2008IS 11298(Part 3/Sec 5-7):1998
/ IEC60674-3-4to6(1993
Plastic Films for Electrical Purposes Part 3 Specification for Individual Materials Section 5-7 Requirements for Polyimide Films
92 Oct 2011IS 11654(Part 1):1986
| IEC 60684-1(1980)
Flexible insulating sleeving: Part 1 Definitions and general requirements
93 Oct 2011IS 11654(Part 2):1986 Flexible insulating sleeving: Part 2 Methods of tests
94 Oct 2010IS 11654(Part 3/Sec 1):1988 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 1 General purpose grade sleeving with temperature index 90
95 Oct 2010IS 11654(Part 3/Sec 103):1989 Flexible insulating sleevings: Part 3 Specifications for individual types of sleevings, Section 103 General purpose grade sleeving with unilateral tolerances with temperature index 90
96 Oct 2010 1IS 11654(Part 3/Sec 403):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 403 Glass textile sleeving with acrylic based coating - High breakdown strength
97 Oct 2010IS 11654(Part 3/Sec 404):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 404 Glass textile sleeving with acrylic based coating - Medium breakdown strength
98 Oct 2010IS 11654(Part 3/Sec 405):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 405 Glass textile sleeving with acrylic based coating - Lower breakdown strength
99 Oct 2010 1IS 11654(Part 3/Sec 406):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 406 Glass textile sleeving with PVC based coating - High breakdown strength
100 Oct 2010IS 11654(Part 3/Sec 407):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 407 Glass textile sleeving with PVC based coating - Medium breakdown strength
101 Oct 2010IS 11654(Part 3/Sec 408):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 408 Glass textile sleeving with PVC based coating - Lower breakdown strength
102 Oct 2011IS 11731(Part 1):1986
| IEC 60107(1981)
Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 1 Horizontal specimen method
103 Oct 2011IS 11731(Part 2):1986
| IEC 60707(1981)
Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 2 Vertical specimen method
11
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
104 Oct 2011IS 11755:1986
| IEC 60345(1971)
Method of test for determination of electrical resistance and resistivity of insulating materials at elevated temperatures
105 Oct 2011 1IS 11756:1986
| IEC 60648(1979)
Method of test for co-efficients of friction of plastic film and sheeting for use as electrical insulation
106 Oct 2010IS 12316(Part 1):1988 Non-cellulosic papers for electrical purposes: Part 1 Definitions and general requirements
107 Oct 2010IS 12316(Part 2):1988 Non-cellulosic papers for electrical purposes: Part 2 Methods of test
108 Oct 2010IS 12316(Part 3/Sec 1):1988 Non-cellulosic papers for electrical purposes: Part 3 Requirements for individual materials, Section 1 Unfilled aramid (Aromatic Polyamide) Papers, calendared
109 Oct 2010IS 12316(Part 3/Sec 2):1988 Non-cellulosic papers for electrical purposes: Part 3 Requirements for individual materials, Section 2 Unfilled aramid (Aromatic Polyamide) Paper, uncalendered
110 Oct 2010IS 12317(Part 1):1988
| IEC 60672-1(1980)
Ceramic and glass insulating materials for telecommunication and allied purposes: Part 1 General requirements and classification of ceramic and glass insulating materials
111 IS 12747(Part 1):2011
/ IEC 60626-1(2009)
Combined flexible materials for electrical insulation - Part 1 Definition and general requirements (First Revision )
112 IS 12747(Part 2):2012 Combined flexible materials for electrical insulation - Part 2 Method of test (First Revision)
113 Nov 2008* IS 12747(Part 3):1998
/ IEC 60626-3(1996)
Combined flexible materials for electrical insulation: Part 3 Specifications for individual materials
114 Oct 2011IS 13066:1991 Prepreg based on glass woven fabric for electrical applications
115 Oct 2011IS 13233:1991 Low voltage high current arc resistance test - Method of test
116 Apr 2013IS 13335:1992 Muscovite mica scrap for mica paper
117 Apr 2013IS 13357:1992 Methods of grading and visual classification of muscovite mica splittings
118 Apr 2010IS 13465(Part 1):2005
/ IEC 60455-1(1998)
Resin based reactive compounds used for electrical insulation: Part 1 Definitions and general requirements (first revision)
119 Sep 2010IS 13465(Part 2):2005
/ IEC 60455-2(1998)
Resin based reactive compounds used for electrical insulation: Part 2 Methods of test [first revision]
120 Apr 2011IS 13465(Part 3/Sec 1):2006
/ IEC 60455-3-1(2003)
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 1: Unfilled epoxy resinous compounds (first revision)
121 Apr 2011IS 13465(Part 3/Sec 2):2006
/ IEC 60455-3-2
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 2: Quartz filled epoxy resinous compounds [first revision)
12
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
122 Apr 2011IS 13465(Part 3/Sec 3):2006
/ IEC 60455-3-3
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 3: Unfilled polyurethane compounds [first revision)
123 Apr 2011IS 13465(Part 3/Sec 4):2006
/ IEC 60455-3-4
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 4: Filled polyurethane compounds (first revision)
124 May 2013IS 13465(Part 3/Sec 5):1998 Solventless polymerisable compounds used for electrical insulation: Part 3 Specification for individual materials, Section 5 Epoxy phynol novolac resin
125 Jul 2011IS 13465(Part 3/Sec 6):2006
/ IEC 60455-3-5(2001)
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 6: Unsaturated polyester based impregnating resins
126 Feb 2013 1IS 13508:1992
| IEC 60894(1987)
Test procedure for measurement of loss of tangent angle of coils and bars for machine winding-guide
127 Apr 2013IS 13884:1993 Muscovite mica flakes and mica powder for industrial applications
128 Oct 2011IS 14353:1996 Guide for determining compatibility between enamelled winding wires and impregnating compounds
129 Aug 2009IS 14672:1999 Method of test for high voltage, low current dry arc resistance of solid electrical insulation
130 Sep 2012IS 15208:2002 Specification for unidirectional fibre glass tape
131 Oct 2012IS 15218(Part 1):2002 Electrical insulating materials - Determination of the lonizing radiation: Part 1 Effects of radiation interaction and dosimetry
132 Apr 2011 2IS 15652:2006 Insulating mats for electrical purposes - Specification (Superseding IS: 5424)
133 IS 60371(Part 1):2003 Specification for insulating materials based on mica – Part 1 : Definitions and general requirements [Superseding IS 9299(Part 1)]
134 IS 60371(Part 2):2004 Specification for insulating materials based on mica – Part 2 : Methods of test [Superseding IS 9299(Part 2)]
135 IS 60371(Part 3/Sec 1):2006
/ IS/IEC60371-3-1:2006
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 1: Commutator separators and materials (Superseding IS: 9299(Part 3/Sec 1):1979)
136 IS 60371(Part 3/Sec 2):2005
/ IS/IEC60371-3-2:2005
Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 2 : Mica paper [Superseding IS 9299(Part 3/Sec 7)]
137 IS 60371(Part 3/Sec 3):1983
/ IS/IEC60371-3-3:1983
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 3 : Rigid mica materials for heating equipment [Superseding IS 9299(Part 3/Sec 4)]
138 IS 60371(Part 3/Sec 4):1992
/ IS/IEC60371-3-4:1992
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 4 Polyester film-backed mica Paper with a B-stage epoxy Resin binder
13
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
139 IS 60371(Part 3/Sec 5):2005
/ IS/IEC60371-3-5:2005
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post- Impregnation (VPI) [Supetseding IS 9299(Part 3/Sec 3)& IS 9299 (Part 3/Sec 5)]
140 IS 60371(Part 3/Sec 6):1992
/ IS/IEC60371-3-6:1992
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 6 : Glass-backed mica paper With a B-stage epoxy resin binder (Superseding IS: 9299(Part 3/Sec 6):1993)
141 IS 60371(Part 3/Sec 7):1995
/ IS/IEC60371-3-7:1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 7 : Polyester film mica paper with an epoxy resin binder for single conductor taping [Supetseding IS 9299(Part 3/Sec 3)& IS 9299 (Part 3/Sec 5)]
142 IS 60371(Part 3/Sec 8):1995
/ IS/IEC60371-3-8:1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 8 : Mica paper tapes for flame-resistant security cables
143 IS 60371(Part 3/Sec 9):1995
/ IS/IEC60371-3-9:1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 9 : Moulding micanite [Superseding IS 9299 (Part 3/ Sec 2)]
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 2(6183) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes [Second Revision of IS 10026(Pt 3/Sec. 1)]
2 DOC.ETD 2(6186) Varnishes used for electrical insulation – Part 1: Definition and general requirements [Second Revision of IS 10026(Part 1)] (IEC 60464-1)
3 DOC.ETD 2(6187) Varnishes used for electrical insulation – Part 2: Methods of test [Second Revision of IS 10026(Part 2)] (IEC 60464-2)
4 DOC.ETD 2(6188) Varnishes used for electrical insulation – Part 3: : Specifications for individual materials – Sheet 2: Hot curing impregnating varnishes [Second Revision of IS 10026(Part 3/Sec 2)] (IEC 60464-3-2)
5 DOC.ETD 2(6292) Combined flexible materials for electrical insulation – Part 3: Specifications for individual materials [First Revision of IS 12747(Part 3]
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 2(6640) Specification for pressboard and presspaper for electrical purposes – Part 1: Definitions and general requirements (IEC 60641-1:2007)
2 DOC.ETD 2(6641) Specification for pressboard and presspaper for electrical purposes – Part 2: Methods of tests (IEC 60641-2:2004)
3 DOC.ETD 2(6642) Pressboard and presspaper for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Requirements for pressboard, types b.0.1, b.0.3, b.2.1, b.2.3, b.3.1, b.3.3, b.4.1, b.4.3, b.5.1, b.5.3 and b.6.1 (IEC 60641-3-1:2008)
14
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
4 DOC.ETD 2(6643) Specification for pressboard and presspaper for electrical purposes – Part 3: Specifications for individual materials – Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (IEC 60641-3-2:2007)
5 DOC.ETD 2(6644) Laminated pressboard for electrical purposes – Part 1: Definitions, classification and general requirements (IEC 60763-1:2010)
6 DOC.ETD 2(6645) Laminated pressboard for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Requirements for laminated recompressed pressboard, Types LB3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
15
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 3 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS
To prepare product specifications, test methods as well as maintenance and use guides for liquid and gaseous dielectric. Also to prepare specifications and maintenance and use guides for lubricants and control fluids for turbines, generators and control systems as well as to assist in the preparations of test methods for such fluids
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2010 2** IS 335:1993 New insulating oils (fourth revision)
2 Dec 2010 1IS 1866:2000
| IEC 60296(1982)
Code of practice for maintenance and supervision of mineral insulating oil in equipment (third revision)
3 Oct 2011 1IS 6103:1971 Method of test for specific resistance (resistivity) of electrical insulating liquids
4 Oct 2011 1IS 6104:1971 Method of test for interfacial tension of oil against water by the ring method
5 Oct 2011IS 6262:1971 Method of test for power factor and dielectric constant of electrical insulating liquids
6 Apr 2013 2* IS 6792:1992
| IEC 60156(1963)
Method for determination of electric strength of insulating oils (first revision)
7 Oct 2008IS 6855:2003 Method of sampling for liquid dielectrics
8 Apr 2013* IS 9434:1992
| IEC 60567(1977)
Guide for sampling and analysis of free and dissolved gases and oil from oil-filled electrical equipment (first revision)
9 Oct 2011IS 9960:1981 Electrical grade castor oil for use as capacitor impregnant
10 Sep 2011IS 10593:2006
/ IEC 60599(1999)
Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (second revision)
11 Apr 2013IS 11549:1986 Impregnating oils and compounds for paper insulated cables upto 33 kV
12 Oct 2011IS 11697:1986 Guide for determination of lightning impulse electric strength of insulating liquids
13 Oct 2011IS 12026(Part 1):1986
| IEC 60590(1977)
Guide for the determination of the aromatic hydrocarbon content of new insulating oils: Part 1 Absorption chromatographic method
14 Oct 2011IS 12026(Part 2):1986 Guide for the determination of the aromatic hydrocarbon content of new insulating oils: Part 2 Infra red spectrophotometric method
15 Apr 2013 1IS 12177:1987 Methods of tests for oxidative ageing of electrical insulation of petroleum oils by the open beaker method
16 Apr 2013* IS 12422:1988
| IEC 60474(1977)
Test method for oxidation stability of inhibited mineral insulating oils
17 Apr 2013 1IS 12463:1988 Inhibited mineral insulating oils
16
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 Apr 2013IS 12475(Part 1):1988 Gassing of insulating liquid under electric stress and ionization: Part 1 Method of determination of gassing rate under hydrogen atmosphere
19 Apr 2013IS 12475(Part 2):1988 Gassing of insulating liquids under electric stress and ionization: Part 2 Method of determination of gassing rate under nitrogen atmosphere
20 Oct 2011 1IS 12958:1990 Oxidation stability of inhibited mineral insulating oil by rotating bomb - Method of test
21 Oct 2011IS 13067:1991 Impregnants for power capacitors
22 Oct 2011* IS 13072:1991
/ IEC 60376 (1971)
Sulphur hexafluoride for electrical purposes
23 Oct 2011IS 13155:1991 Method of test for carbon type analysis of mineral oils by infra-red spectrophotometry
24 Oct 2011* IS 13236:1991
/ IEC 60970(1989)
Methods for counting and sizing particles in insulating liquids
25 IS 13503:2013
/ IEC 61039:2008
Classification of insulating liquids (First Revision)
26 Apr 2013IS 13567:1992 Determination of water in insulating liquids and in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration - Method of test
27 Apr 2013 1* IS 13631:2000
| IEC 60666(1979)
Method of test for detection and determination of antioxidant additives in insulating oils
28 Jun 2011IS 15668:2006
/ IEC 61198(1993)
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
29 IS 16081:2013
/ IEC 61099:2010
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 3(6354) Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment
2 DOC.ETD 3(6355) Specification for unused insulating mineral oils for cables with oil ducts
3 DOC.ETD 3(6356) Mineral oil-filled electrical equipment – Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
4 DOC.ETD 3(6357) Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
5 DOC.ETD 3(6358) Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
6 DOC.ETD 3(6359) Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
7 DOC.ETD 3(6361) Specification of technical grade Sulfur hexafluoride (SF6) for use In electrical equipment (First Revision)
8 DOC.ETD 3(6362) Insulating liquids – methods for counting and sizing particles (First Revision)
17
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 3(6577) Oil-filled electrical equipment – Sampling of gases and analysis of free and dissolved gases – guidance (Second Revision of IS 9434)[IEC 60567(2011)]
2 DOC.ETD 3(6600) Insulating liquids — Determination of the breakdown voltage at power frequency — Test method (Second Revision of IS 6792) [IEC 60156 (1995)]
3 DOC.ETD 3(6601) Unused hydrocarbon-based insulating liquids - Test methods for evaluating the oxidation stability (First Revision of IS 12422) [IEC 61125 (1992)]
4 DOC.ETD 3(6602) Detection and determination of specified additives in mineral insulating oils (First Revision of IS 13631) [IEC 60666 (2010)]
5 DOC.ETD 3(6603) Insulating liquids – Contamination by polychlorinated biphenyls (PCBs) – Method of determination by capillary column gas chromatography [IEC 61619 (1997)]
6 DOC.ETD 3(6604) IInsulating liquids – Test method for detection of potentially corrosive sulphur in used and unused insulating oil [IEC 62535 (2008)]
18
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 6 ELECTRICAL INSULATORS AND ACCESSORIES
To prepare standards regarding insulated bushing, insulators for overhead lines, insulators for sub-stations and jointing accessories which are integral parts of insulators
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Jul 2011 4IS 283:1976 Porcelain insulators for telegraph and telephone lines (third revision)
2 Jul 2011 7IS 731:1971 Porcelain insulators for overhead power lines with a nominal voltage greater than 1000 V (second revision)
3 Apr 2009IS 1441:1989 Insulator stalks for telegraph and telephone lines (second revision)
4 Apr 2009 5IS 1445:1977 Porcelain insulators for overhead power lines with a nominal voltage up to andincluding 1 000 V (second revision)
5 Apr 2013 2IS 2099:1986 Bushings for alternating voltages above 1 000 Volts (second revision)
6 Apr 2013IS 2486(Part 1):1993 Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V - Specification :Part 1 General requirements and tests (first revision)
7 Apr 2009IS 2486(Part 2):1989
| IEC 120 (1984)
Insulator fittings for overhead power lines with nominal voltage greater than1000 V - Specification : Part 2 Dimensional requirements (second revision)
8 Jul 2011IS 2486(Part 3):1974
| IEC 372-1 (1971)
Specification for Insulator fittings for overhead power lines with a nominal voltage greter than 1 000 Volts: Part 3 Locking devices
9 Jul 2011IS 2486(Part 4):1981
| IEC 372-2 (1976)
Specification for Insulator fittings for overhead power lines with a nominal voltage greater than1 000 V: Part 4 Test for locking devices
10 Jul 2011 4IS 2544:1973
| IEC 168 (1964)
Porcelain post insulators for systems with nominal voltage greater than 1000 Volts (first revision)
11 Apr 2009IS 3188:1980 Characteristics of string insulator units (first revision)
12 Apr 2009 1IS 3347(Part 1/Sec 1):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 1 Upto and including 1 kV, Section 1 Porcelain parts (first revision)
13 Apr 2009 3IS 3347(Part 1/Sec 2):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 1 Up to and including 1 kV, Section 2 Metal parts (first Revision)
14 Apr 2009 1IS 3347(Part 2/Sec 1):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 1 Porcelain Parts (first revision)
15 Apr 2009 3IS 3347(Part 2/Sec 2):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 2 Metal parts (first revision)
19
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 Apr 2009IS 3347(Part 3/Sec 1):1988 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 1 Porcelain parts (second revision)
17 Apr 2009 2IS 3347(Part 3/Sec 2):1982 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 2 Metal parts (first revision)
18 Apr 2009 1IS 3347(Part 4/Sec 1):1988 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 1 Porcelain parts (Second revision)
19 Apr 2009 3IS 3347(Part 4/Sec 2):1982 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 2 Metal Parts (first revision
20 Apr 2009 1IS 3347(Part 5/Sec 1):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 1 Porcelain parts (second revision)
21 Apr 2009 2IS 3347(Part 5/Sec 2):1979 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 2 Metal parts (first revision)
22 Apr 2009IS 3347(Part 8/Sec 1):1988 Dimensions for procelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings, Section 1 Porcelain parts
23 Apr 2009IS 3347(Part 8/Sec 2):1992 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings: Section 2 Metal parts
24 Apr 2009 1IS 4257(Part 1):1981 Dimensions for clamping arrangements for porcelain transformer bushings: Part 1 For 12 kV to 36 kV bushings (first revision)
25 Apr 2009IS 4257(Part 2):1986 Dimensions for clamping arrangements for porcelain transformer bushings: Part 2 For 72.5 kV and 123 kV bushings
26 Apr 2013IS 4318:1993 Solid core porcelain insulators for overhead traction lines (first revision)
27 Apr 2009IS 5300:1969 Specification for porcelain guy strain insulators
28 Apr 2009 2IS 5350(Part 1):1970
| IEC 273 (1968)
Dimensions of indoor and outdoor porcelain post insulator and post insulator units for system with nominal voltage greater than 1000 V: Part 1 Indoor post insulators
29 Apr 2009** IS 5350(Part 2):1973 Dimensions of indoor and outdoor porcelain post insulators and post insulator units for system with nominal voltage greater than 1000 V: Part 2 Outdoor cylindrical post insulators
30 Apr 2009 3IS 5350(Part 3):1971
| IEC 273 (1968)
Dimensions of indoor and outdoor porcelain post insulators and post insulator units for system with nominal voltages greater than 1000 V: Part 3 Outdoor pedestal post insulators
31 Apr 2009 2IS 5621:1980 Hollow insulators for use in electrical equipment (first revision)
32 Apr 2009IS 7421:1988 Porcelain bushings for alternating voltage upto and including 1000 V (first revision)
33 Apr 2009IS 7648:1975 Silicone compound for application on high voltage porcelain insulators
20
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
34 Jul 2011 3IS 7935:1975 Insulator fittings for overhead power lines with a nominal voltage upto and including 1000 V
35 Apr 2009IS 8263:1976 Methods for radio interference test on high voltage insulators
36 Apr 2009IS 8269:1976 Methods for switching impulse tests on high voltage insulators
37 Sep 2008IS 8603:2008 Dimensions for procelain transformers bushings for use heavily polluted atmospheres 12/17.5kv, 24kv and 36 kv (First revision of IS 8603 (Part 1,2 & 3 combined)
38 Oct 2008IS 8603(Part 4):2003 Dimensions for porcelain transformers bushings for use in heavily polluted atmospheres: Part 4 52 kV bushings
39 Oct 2011IS 8704:1995
| IEC 507 (1991)
Artificial pollution on high voltage insulators to be used on ac systems (first revision)
40 Apr 2009 1IS 8765:1978 Ceramic insulating materials for electrical purposes
41 Apr 2009IS 9431:1979 Indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V upto and including 300 kV
42 Jul 2011IS 10136:1982 Code of practice for selection of disc insulator fittings for highest system voltages of 72.5 kV and above
43 Jul 2011IS 10314:1982 Dimensions for ceramic bushings for terminals
44 Jul 2011IS 12676:1989 Oil impregnated paper insulated condenser bushings - Dimensions and requirements
45 Apr 2013IS 13134:1992 Guide for the selection of insulators in respect of pollution conditions
46 Apr 2013IS 13305:1992 Permissible limits of visual defects for insulating porcelains for electrical circuits
47 Apr 2013IS 13312:1992 Dimensions of porcelain oil filled transformer bushings (rated 52 kV) for medium polluted atmospheres
48 Dec 2012IS 15137:2002 Metal Connecting Lugs for Porcelain Transformer Bushings - Specification
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 6(6338)
/ IEC 60372 : 1984
Locking Devices for ball and socket couplings of string insulators units. Dimensions and tests
21
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 7 LOW VOLTAGE SWITCHGEAR & CONTROLGEAR
To prepare standards for switchgear and controlgear such as circuit breakers, switches, contactors, starters, disconnectors, bus bars, fuse combination units and semiconductors connectors and any switchgear assemblies for voltages upto and including 1 000 V ac or 1 200 V dc
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2011IS 1356(Part 1):1972
| IEC 60204-1
Electrical equipment of machine tools:Part 1 Electrical equipment of machinesfor general use (second revision)
2 Mar 2011IS 2675:1983 Enclosed distribution fuseboards and cutouts forvoltages not exceeding 1000 V (second revision)
3 Mar 2011IS 5039:1983 Distribution pillars for voltages not exceeding 1 000 volts (first revision)
4 Mar 2013 1IS 8588(Part 1):1977 Thermostatic bimetals: Part 1 General requirements and methods of tests
5 Mar 2013IS 8623(Part 1):1993
/ IEC 60439-1(1985)
Specification for low voltage switchgear and controlgear assemblies:Part 1 Requirements for type-tested and partially type tested assemblies (first revision).
6 Mar 2013IS 8623(Part 2):1993
/ IEC 60439-2(1987)
Specification for low voltage switchgear and controlgear assemblies: Part 2 Particular requirements for busbar trunking systems (busways)-(first revision)
7 Mar 2013IS 8623(Part 3):1993
/ IEC 60439-3(1990)
Low-voltage switchgear and controlgear assemblies: Part 3 Particular requirements for equipment where unskilled persons have access for their use.
8 Mar 2010IS 10027:2000 Composite units of air-break switches and rewirabletype fuses for voltages not exceeding 650 volt ac -Specification (first revision)
9 Mar 2010 2IS 12021:1987 Specification for control transformers for switchgearand controlgear for voltages not exceeding 1000 Volt ac
10 Apr 2013IS 12640(Part 1):2008
/ IEC 61008-1:1996
Residual current operated circuit-breakers for household and simililar uses : Part 1 circuit-breakers without integral overcurrent protection(RCCBs) (First Revision)
11 Apr 2013IS 12640(Part 2):2008
/ IEC 61009-1:1996
Residual current operated circuit breakers for household and similar uses: Part 2 circuit breakers with integral overcurrent protection(RCBOs) (First Revision)
12 Mar 2011 1IS 13032:1991 Miniature circuit breaker boards for voltage upto and including 1 000 Volt ac
13 Jun 2009IS 13947(Part 5/Sec 2):2004
/ IEC 60947-5-2(2000)
Low voltage switchgear and controlgear :Part 5 Control circuit devices and switching elements Section 2 Proximity switches
14 Jun 2008IS 14577:1998
/ IEC 60363(1998)
Short-circuit current evaluation with special regard to rated short-circuit capacity of circuit-breakers in installations in ships
22
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
15 Mar 2013IS 14614:1998
/ IEC 61543(1995)
Residual Current Operated Protective Devices (RCDs) for household and similar use - Electromagnetic compatibility.
16 Oct 2012IS 60715:1981
/ IS/IEC 60715:1981
Dimensions of Low-voltage swtichgear and controlgear - Standardized mounting on rails of mechanical support of electrical devices in switchgear and controlgear installations(Superseding IS 11039)
17 May 2008IS 60898(Part 1):2002
/ IS/IEC 60898-1:2002
Electrical Accessories - circuit breakers for over protection for household and similar installations Part 1 Circuit breakers for a.c. . operation ( Superseding IS 8828)
18 Sep 2012IS 60898(Part 2):2003
/ IS/IEC 60898-2:2003
Electrical Accessories - circuit breakers for over protection for household and similar installations Part 2 Circuit breakers for a.c. and d.c. operation
19 Apr 2012IS 60947(Part 1):2007
/ IS/IEC 60947-1:2007
Low voltage switchgear and controlgear: Part 1 General Rules (Superseding IS 13947(Part 1) (IEC 60947-1(2007)) (First Revision)
20 Dec 2012IS 60947(Part 2):2003
/ IS/IEC 60947-2:2003
Low voltage switchgear and controlgear: Part 2 Circuit breakers[Superseding IS 13947( Part 2 ):1993]
21 Apr 2013IS 60947(Part 3):1999
/ IS/IEC 60947-3:1999
Low voltage switchgear and controlgear : Part 3 Switches, disconnectors, switch-disconnectors and fuse combination units [Superseding IS 13947(Part 3)]
22 Jul 2008IS 60947(Part 4/Sec 1):2000
/ ISIEC 60947-4-1:2000
Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1)
23 Oct 2012IS 60947(Part 4/Sec 2):1999
/ ISIEC 60947-4-2:1999
Low voltage switchgear and controlgear: Part 4 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters
24 May 2008IS 60947(Part 4/Sec 3):1999
/ ISIEC 60947-4-3:1999
Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non-motor loads
25 May 2008IS 60947(Part 5/Sec 1):2003
/ ISIEC 60947-5-1:2003
Low-voltage switchgear and controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (Sperseding of IS 13947 Part 5/Sec 1)
26 May 2012IS 60947(Part 5/Sec 2):2007 Low voltage switchgear and controlgear :Part 5 Control circuit devices and switching elements Section 2 Proximity switches (60947-5-2:2007)
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 7(6255) Low voltage switchgear and controlgear :Part 3 Switches, disconnectors, switch-disconnectors and fuse combination units (First Revision) (IEC 60947-3:2008, ED 3.0)
2 DOC.ETD 7(6273) Low voltage switchgear and controlgear: Part 2 Circuit breakers (IEC 60947-2:2006) (First Revision)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 7(6584) Low voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying Assmeblies [Superseding IS 8623(Part 1):2008(IEC 61439-0:2010)
23
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
2 2001DOC.ETD 7(6586)
/ IEC 61439-2 : 2011
Low voltage switchgear and controlgear assemblies - Part 2 : Power Switchgear And Controlgear Assemblies (Superseding IS 8623 (Part 1) : 1993 and IS 2675 : 1993 (IEC 61439-2:2011)
3 DOC.ETD 7(6587) Low voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power distribution systems (IEC 61643-11:2011)
4 DOC.ETD 7(6256) Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1) (IEC 60947-4-1:2009, Ed 3.0)
5 DOC.ETD 7(6257) Amendment No. 1 to IS/IEC 60947-5-1:2003 Low-voltage switchgear and controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices
6 DOC.ETD 7(6311) Low voltage surge protective devices - Part 12 : Surge protective devices connected to low-voltage power distribution systems - Selection and application principles (IEC 61643-12:2008)
7 DOC.ETD 7(6334) Specification for control transformers for switchgearand controlgear for voltages not exceeding 1000 Volt ac (First Revision of iS 12021)
8 DOC.ETD 7(6582)
/ IEC 61008-1:2012
Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) : Part 1 General rules [Superseding IS 12640(Part 1): 2008]
9 DOC.ETD 7(6583)
/ IEC 61009-1:2012
Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) : Part 1 General rules [Superseding IS 12640(Part 2): 2008]
10 DOC.ETD 7(6585)
/ IEC 61439-1:2011
Low voltage switchgear and controlgear assemblies - Part 1: General rules [Superseding IS 8623(Part 1):1993(IEC 61439-1:2011)
11 DOC.ETD 7(6613)
/ IEC 60947-4-2:2011
Low voltage switchgear and controlgear: Part 4 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters (First Revision)
12 DOC.ETD 7(6614)
/ IEC 60947-4-3:2011
Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non-motor loads (First Revision)
DRAFT STANDARDS FORMULATED
1 DOC.ETD 7(6332) Draft Guidelines for application of aluminum conductors for low voltage switchgear and controlgear as per IS/IEC 60947-1
24
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 8 HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR
To prepare standards for switchgear and controlgear; such as circuit breakers, switches contactors, starters, disconnectors, busbars and any switchgear assemblies for voltages more than 1000 V ac
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Sep 2012 1IS 3427:1997
/ IEC 60298:1990
A.C. Metal enclosed switchgear and controlgear for rated voltages above 1kV upto and including 52 kV(first revision)
2 Sep 2012IS 5561:1970 Electric power connectors
3 Sep 2012IS 7567:1993 Automatic circuit reclosers(second revision)
4 Sep 2012IS 8084:1976 Interconnecting busbars for ac voltage above 1 kV upto and including 36 kV
5 Sep 2012IS 9135:1979 Guide for testing of circuit breakers with respect to out-of-phase switching
6 Sep 2012* IS 9920(Part 1):2002
/ IEC 60265:1998
High Voltage Switches - Part 1 : Switches for Rated Voltages Above 1 kV and Less Than 52 KV
7 Mar 2011IS 9920(Part 2):2001
/ IEC 60265-2:1988
High voltage switches : Part 2 High voltage switches for rated voltages of 52 kV and above (First revision)
8 Sep 2012* IS 9920(Part 3):1982
| IEC 60129:1975
Switches and switch isolators for voltages above 1000 V: Part 3 Design and construction
9 Sep 2012* IS 9920(Part 4):1985
| IEC 60129:1975
Switches and switch isolators for voltages above 1000 V: Part 4 Type tests and routine tests
10 Sep 2012* IS 9921(Part 1):1981
| IEC 60129:1975
Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 1 General and definitions
11 Sep 2012* IS 9921(Part 2):1982
| IEC 60129:1975
Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 2 Rating
12 Sep 2012* IS 9921(Part 3):1982
| IEC 60129:1975
Alternating current disconnectors (isolators and earthing switches for voltages above 1 000 V: Part 3 Design and construction
13 Sep 2012* IS 9921(Part 4):1985
| IEC 60129:1975
Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 4 Type tests and routine tests
14 Sep 2012* IS 9921(Part 5):1985
| IEC 60129:1975
Alternating current disconnectors (isolators) and earthing switches for voltages above 1 000 V: Part 5 Information to be given with tenders, inquiries and orders
15 Oct 2010IS 10601:1983 Dimensions of terminals of high voltage switchgear and controlgear
16 Apr 2008IS 13516:1993
/ IEC 60427:1989
Methods of synthetic testing of high voltage alternating current circuit breakers
25
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
17 Apr 2008IS 14657:1998
/ IEC 61259:1994
Gas-insulated metal-enclosed switchgear for rated voltage 72.5 kV and above - requirements for switching of bus-charging current by disconnectors.
18 Apr 2009IS 14658:1999
/ IEC 61633:1995
High-voltage alternating current circuit-breakers- Guide for short-circuit and switching test procedures for metal-enclosed and dead tank circuit-breakers
19 Apr 2009IS 14659:1999
/ IEC 60466:1987
A.C. insulation-enclosed switchgear and controlgear for rated voltage above 1 kV and upto and including 38 kV
20 Apr 2009IS 14666:1999
/ IEC 60420:1990
High voltage alternating current switch fuse combinations
21 Apr 2009IS 14674:1999
/ IEC 61166:1993
High voltage alternating current circuit breakers-Guide for seismic qualifications of high-voltage alternating current circuit-breakers
22 Mar 2010IS 14786:2000
/ IEC 61330:1995
High voltage/ low voltage prefabricated substations
23 May 2009IS 60470:2000
/ IS/IEC 60470:2000
High Voltage Alternating Current Contactors and Contactor-Based Motor-Starters (superseeding IS 9046:1978 and IS 12661(Part 1):1988
24 Oct 2008IS 60517:1990
/ IS/IEC 60517:1990
Gas insulated metal enclosed switchgear for rated voltages of 72.5 KV and above
25 Sep 2008IS 62271(Part 1):2007
/ IEC 62271-1 :2007
High-voltage switchgear and controlgear:Part 1 Common Specification (IEC 62271-1 :2007) (Superseding IS 12729)
26 Oct 2012IS 62271(Part 100):2008
/ IEC 62271-100 :2008
High-voltageswitchgear and controlgear:Part 100 Alternating current Circuit Breakers(IEC 62271-100 :2008)
27 IS 62271(Part 102):2003
/ IS/IEC62271-102:2003
High-voltage switchgear and controlgear:Part 102 High-voltage alternating current circuit breakers
28 IS 62271(Part 105):2002
/ IS/IEC62271-105:2002
High-voltageswitchgear and controlgear: Part 105 Alternating current switch-fuse combinations
29 Oct 2012IS 62271(Part 109):2008
/ IEC 62271-109 : 2008
High-voltag switchgear and controlgear:Part 109 Alternating current Series Capacitor by pass Switches (IEC 62271-109 :2008)
30 IS 62271(Part 200):2003
/ IS/IEC62271-200:2003
High-voltage switchgear and controlgear: Part 200 AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up To and Including 52 kV
31 IS 62271(Part 201):2006
/ IS/IEC62271-201:2006
High-voltage switchgear and controlgear: Part 201 AC Insulation Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Above 52 kV
32 IS 62271(Part 203):2003
/ ISIEC 62271-203:2003
High-voltage switchgear and controlgear: Part 203 Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
33 IS 62271(Part 207):2000 High-Voltage switchgear and controlgear: Part 207 Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV (IEC 62271-207)
26
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 8(6281) High-voltage switchgear and controlgear: Part 111 Overhead, pad-mounted, dry valut, and submersible automatic circuit reclosures and fault interrupters for alternating current systems upto 38 kV (IEC 62271-111)
2 DOC.ETD 8(6309) High-voltage switchgear and controlgear: Part 104 Alternating current switches for rated voltage of 52 kV and above (IEC 62271-104:2009)
3 DOC.ETD 8(6341) High-voltage switchgear and controlgear: Part 202 Prefabricated substation (Superseding IS 14786) (IEC 62271-202:2006)
27
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 9 POWER CABLES
To prepare standards for electric cables and their accessories, without limitations of voltage, current or form of construction but excluding cables for telecommunications and electronic equipment and such other cables as fall within the scope of other committees
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Feb 2010 2IS 692:1994 Paper insulated lead-sheathed cables for rated voltages upto and including 33 kV (third revision)
2 1IS 694:2010 Polyvinyl chloride insulated sheathed and unsheathed cables with rigid and flexible conductor for rated voltages upto and including 450/750 V : Part 1 General requirements (fourth revision)
3 Feb 2010 5IS 694:1990
| IEC 60227-1to5:1979
PVC Insulated cables for working voltages upto and including 1100 V (Third revision)
4 Nov 2011IS 1255:1983 Code of practice for installation and maintenance of power cables upto and including 33 kV rating (second revision)
5 Feb 2010 5IS 1554(Part 1):1988
| IEC 60502:1983
PVC insulated (heavy duty) electric cables: Part 1 For working voltages upto and including 1 100 V (third revision)
6 Feb 2010 4IS 1554(Part 2):1988
| IEC 60502:1983
PVC insulated (heavy duty) electric cables:Part 2 For working voltages from 3.3kV upto and including 11 kV (Second revision)
7 Nov 2011 1IS 2465:1984 Cables for motor vehicles (second revision)
8 Nov 2011 1IS 2593:1984 Flexible cables for miners' cap lamps (first revision)
9 Nov 2011 1IS 3961(Part 1):1967 Recommended current ratings for cables: Part 1 Paper insulated lead sheathed cables
10 Nov 2011 2IS 3961(Part 2):1967 Recommended current ratings for cables: Part 2 PVC insulated and PVC sheathed heavy duty cables
11 Nov 2011 1IS 3961(Part 3):1968 Recommended current ratings for cables: Part 3 Rubber insulated cables
12 Nov 2011IS 3961(Part 5):1968 Recommended current ratings for cables: Part 5 PVC insulated light duty cables
13 Nov 2011IS 4289(Part 1):1984
| IEC 60245-5
Flexible cables for lifts and other flexible connections: Part 1 Elastomer insulated cables (first revision)
14 Feb 2010IS 4289(Part 2):2000
| IEC 60227-6:1985
Flexible cables for lifts and other flexible Connections:Part 2 PVC insulated cables
15 Nov 2011IS 5819:1970 Recommended short-circuit ratings of high voltage PVC cables
16 Nov 2011 2IS 5831:1984
| IEC 60502:1983
PVC insulation and sheath of electric cables (first revision)
17 Nov 2011IS 5950:1984 Shot firing cables (for use other than in shafts) (first revision)
28
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 Nov 2011 1IS 6380:1984
| IEC 60502:1983
Elastomeric insulation and sheath of electric cables (first revison)
19 Nov 2011 1IS 6554:1983 Soldering ferrules of straight through joints (first revision)
20 Feb 2010 5IS 7098(Part 1):1988
| IEC 60502:1983
Cross-linked polyethylene insulated thermosplastic sheathed cables - Specification : Part 1 For working voltages upto and including 1 100 V (first revision)
21 2IS 7098(Part 2):2011
| IEC 60502-2:2005
Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification : Part 2 For working voltages from 3.3 kV upto and including 33 kV (second revision)
22 Dec 2008 4IS 7098(Part 3):1993 Crosslinked polyethylene insulated thermoplastic sheathed cables: Part 3 For working voltages from 66 kV upto and including 220 kV
23 Nov 2011* IS 8130:1984
| IEC 60228:1978
Conductors for insulated electric cables and flexible cords (first revision)
24 Dec 2008IS 8308:1993 Compression type tubular in-line connectors for aluminium conductors of insulated cables (first revision)
25 Dec 2008 1IS 8309:1993 Compression type tubular terminal ends for aluminium conductors of insulated cables (first revision)
26 Feb 2010 1IS 8337:1976 Performance requirements of compression joints of aluminium conductors in insulated cables
27 Aug 2012 2IS 8394:1977 Soldering and welding type terminal ends for conductors of insulated cables
28 Aug 2012IS 8438:1987 Moulds of cast resin based straight through joints for cables for voltages upto and including 1 100 V (first revision)
29 Aug 2012IS 9553:1987 Moulds suitable for cast resin based terminations for cables for voltages upto and including 1 100 V (first revision)
30 Dec 2008IS 9646:1992 Moulds suitable for cast resin-based joints for cables for voltages upto and including 1 100 V (first revision)
31 Feb 2010 1IS 9857:1990
| IEC 60245-6
Welding cables (first revision)
32 Feb 2010 2IS 9968(Part 1):1988 Elastomer insulated cables:Part 1 For working voltages upto and including 1 100 V (first revision) [superseeding IS 434(Parts 1 and 2)]
33 Aug 2012 2IS 9968(Part 2):2002 Specification for elastomer-insulated cables:Part 2 For working voltages from 3.3 kV upto and including 33 kV (first revision) (superseding IS:434(Parts 1 and 2)
34 Nov 2011IS 10418:1982 Drums for electric cables
35 Nov 2011IS 10435(Part 1):1983 Inverted type cable end boxes for outdoor termination suitable for paper insulated cables : Part 1 Belted type, multi-core cables upto and including 11 kV grade
36 Nov 2011IS 10462(Part 1):1983
| IEC 60502:1978
Fictitious calculation method for determination of dimensions of protective coverings of cables:Part 1 Elastomeric and thermoplastic insulated cables
29
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
37 Nov 2011IS 10462(Part 2):1991
| IEC 60055-2
Fictitious calculation method for determination of dimensions of protective coverings of cables: Part 2 Paper insulated cables
38 Nov 2011IS 10606:1983 Cast iron joint boxes for tee and branch trouser joints suitable for paper insulated cables for voltages upto and including 11 kV
39 Nov 2011IS 10810(Part 0):1984 Methods of test for cables: Part 0 General
40 Nov 2011IS 10810(Part 1):1984 Methods of test for cables: Part 1 Annealing test for wires used in conductors
41 Nov 2011IS 10810(Part 2):1984 Methods of test for cables: Part 2 Tensile test for aluminium wires
42 Nov 2011IS 10810(Part 3):1984 Methods of test for cables: Part 3 Wrapping test for aluminium wires
43 Nov 2011IS 10810(Part 4):1984 Methods of test for cables: Part 4 Persulphate test of conductor
44 Nov 2011IS 10810(Part 5):1984 Methods of test for cables: Part 5 Conductor resistance test
45 Nov 2011IS 10810(Part 6):1984 Methods of test for cables: Part 6 Thickness of thermoplastic and elastomeric insulation and sheath
46 Nov 2011IS 10810(Part 7):1984 Methods of test for cables: Part 7 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath
47 Nov 2011IS 10810(Part 8):1984 Methods of test for cables: Part 8 Breaking strength and elongation at break for impregnated paper insulation
48 Nov 2011IS 10810(Part 9):1984 Methods of test for cables: Part 9 Tear resistance for paper insulation
49 Nov 2011IS 10810(Part 10):1984 Methods of test for cables:Part 10 Loss of mass test
50 Nov 2011IS 10810(Part 11):1984 Methods of test for cables:Part 11 Thermal ageing in air
51 Nov 2011IS 10810(Part 12):1984 Methods of test for cables:Part 12 Shrinkage test
52 Nov 2011IS 10810(Part 13):1984 Methods of test for cables:Part 13 Ozone resistance test
53 Nov 2011IS 10810(Part 14):1984 Methods of test for cables:Part 14 Heat shock test
54 Nov 2011IS 10810(Part 15):1984 Methods of test for cables:Part 15 Hot deformation test
55 Nov 2011IS 10810(Part 16):1986 Methods of test for cables:Part 16 Accelerated ageing test by oxygen pressure method
56 Nov 2011IS 10810(Part 17):1986 Methods of test for cables: Part 17 Tear resistance test for heavy duty sheath
57 Nov 2011IS 10810(Part 19):1984 Methods of test for cables:Part 19 Bleeding and blooming test
30
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
58 Nov 2011IS 10810(Part 20):1984 Methods of test for cables:Part 20 Cold bend test
59 Nov 2011IS 10810(Part 21):1984 Methods of test for cables:Part 21 Cold impact test
60 Nov 2011IS 10810(Part 22):1984 Methods of test for cables:Part 22 Vicat softening point
61 Nov 2011IS 10810(Part 23):1984 Methods of test for cables:Part 23 Melt-flow index
62 Nov 2011IS 10810(Part 24):1984 Methods of test for cables:Part 24 Water soluble impurities test of insulating paper
63 Nov 2011IS 10810(Part 25):1984 Methods of test for cables:Part 25 Conductivity of water extract test of insulating paper
64 Nov 2011IS 10810(Part 26):1984 Methods of test for cables:Part 26 pH value of water extract test of insulating paper
65 Nov 2011IS 10810(Part 27):1984 Methods of test for cables:Part 27 Ash content test of insulating paper
66 Nov 2011IS 10810(Part 28):1984 Methods of test for cables:Part 28 Water absorption test (Electrical)
67 Nov 2011IS 10810(Part 29):1984 Methods of test for cables:Part 29 Environmental stress cracking test
68 Nov 2011IS 10810(Part 30):1984 Methods of test for cables:Part 30 Hot set test
69 Nov 2011IS 10810(Part 31):1984 Methods of test for cables:Part 31 Oil resistance test
70 Nov 2011IS 10810(Part 32):1984 Methods of test for cables:Part 32 Carbon content test for polyethylene
71 Nov 2011 2IS 10810(Part 33):1984 Methods of test for cables:Part 33 Water absorption test (Gravimetric)
72 Nov 2011IS 10810(Part 34):1984 Methods of test for cables:Part 34 Measurement of thickness of metallic sheath
73 Nov 2011IS 10810(Part 35):1984 Methods of test for cables:Part 35 Determination of tin in lead alloy for sheathing
74 Nov 2011IS 10810(Part 36):1984 Methods of test for cables:Part 36 Dimensions of armouring material
75 Nov 2011IS 10810(Part 37):1984 Methods of test for cables:Part 37 Tensile strength and elongation at break of armouring materials
76 Nov 2011IS 10810(Part 38):1984 Methods of test for cables:Part 38 Torsion test on galvanized steel wires for armouring
77 Nov 2011IS 10810(Part 39):1984 Methods of test for cables:Part 39 Winding test on galvanized steel strips for armouring
78 Nov 2011 1IS 10810(Part 40):1984 Methods of test for cables:Part 40 Uniformity of zinc coating on steel armour
79 Nov 2011IS 10810(Part 41):1984 Methods of test for cables:Part 41 Mass of zinc coating on steel armour
31
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
80 Nov 2011 1IS 10810(Part 42):1984 Methods of test for cables:Part 42 Resistivity test of armour wires and strips and conductance test of armour (wires/strips)
81 Nov 2011IS 10810(Part 43):1984 Methods of test for cables:Part 43 Insulation resistance
82 Nov 2011IS 10810(Part 44):1984 Methods of test for cables:Part 44 Spark test
83 Nov 2011IS 10810(Part 45):1984 Methods of test for cables:Part 45 High voltage test
84 Nov 2011IS 10810(Part 46):1984 Methods of test for cables:Part 46 Partial discharge test
85 May 2010 1IS 10810(Part 47):1984 Methods of test for cables:Part 47 Impulse test
86 Nov 2011IS 10810(Part 48):1984 Methods of test for cables:Part 48 Dielectric power factor test
87 Nov 2011IS 10810(Part 49):1984 Methods of test for cables:Part 49 Heating cycle test
88 Nov 2011IS 10810(Part 50):1984 Methods of test for cables:Part 50 Bending test
89 Nov 2011IS 10810(Part 51):1984 Methods of test for cables:Part 51 Dripping test
90 Nov 2011IS 10810(Part 52):1984 Methods of test for cables:Part 52 Drainage test
91 Nov 2011IS 10810(Part 53):1984 Methods of test for cables:Part 53 Flammability test
92 Nov 2011IS 10810(Part 54):1984 Methods of test for cables:Part 54 Static flexibility test
93 Nov 2011IS 10810(Part 55):1986 Methods of test for cables:Part 55 Abrasion test
94 Aug 2012IS 10810(Part 56):1987 Methods of test for cables: Part 56 Accelerated ageing by air-pressure method
95 Aug 2012IS 10810(Part 57):1987 Methods of test for cables: Part 57 Flexing test
96 Dec 2008IS 10810(Part 58):1998 Methods of test for cables: Part 58 Oxygen index test
97 May 2010IS 10810(Part 59):1988 Methods of test for cables: Part 59 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
98 May 2010IS 10810(Part 60):1988 Methods of test for cables: Part 60 Thermal stability of PVC insulation and sheath
99 May 2010 1IS 10810(Part 61):1988 Methods of test for cables: Part 61 Flame retardant test
100 Dec 2008IS 10810(Part 62):1993 Methods of test for cables: Part 62 Fire resistance test for bunched cables
101 Dec 2008IS 10810(Part 63):1993 Methods of test for cables: Part 63 Smoke density of electric cables under fire conditions
32
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
102 Mar 2013IS 10810(Part 64):2003 Methods of test for cables :Part 64 Measurement of temperature index
103 Nov 2011IS 10877:1984 Moulds suitable for cast resin based indoor terminations for cables for voltages 3.3 kV and above and upto and including 11 kV
104 Aug 2012IS 11979:1987 Moulds for cast resin based straight through joints for cables for working voltages from 3.3 kV upto and including 11 kV
105 Feb 2010IS 12909:1990 Power cables dimensions for moulds for cast resin based outdoor terminations for cables for voltages above 1 100 volts and upto and including 11 000 volts
106 Feb 2010IS 12943:1990 Brass glands for PVC cables
107 IS 13573(Part 1):2011 Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 kV (E) Part 1 Test requirements and test methods (First Revision of IS 13573)
108 IS 13573(Part 2):2011 Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 Kv (E) Part 2 Test requirements (First Revision of IS 13573)
109 IS 13573(Part 3):2011 Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 kV (E) Part 3 Test methods (First Revision of IS 13573)
110 Dec 2008IS 13705:1993 Performance requirements and type test for transition joint of cables for working voltages from 11 kV up to and including 33 kV
111 Feb 2010 1IS 14255:1995 Aerial bunched cables for working voltages upto and including 1 100 volts- specification
112 Dec 2008IS 14494:1998 Elastomer insultated flexible cables for use in mines (superseeding IS:691 and IS:1026)
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 9(5971) Specification for elastomer insulated cables with limited circuit integrity when affected by fire.
2 DOC.ETD 9(6037) Specification for recommended short circuit ratings of electric cables with rated voltage from 1.1 kV to 220 kV
3 DOC.ETD 9(6339) Specification for conductors for insulated electric cables and flexible cords (second revision of IS 8130)
4 DOC.ETD 9(6502) Recommended current ratings for cables - Part 7 : Crosslinked polyethylene insulated thermoplastic sheathed cables
5 DOC.ETD 9(6503) Recommended current ratings for cables - Part 6 : Crosslinked polyethylene insulated PVC sheathed cables
6 DOC.ETD 9(6504) Recommended current ratings for cables - Part 2 : PVC insulated and PVC cables sheathed heavy duty cables (First revision of iS 3961)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 9(5865) Halogen Free Flame Retardant Cables for Working Voltages up to and including 450/750 Volts - Specification
33
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
2 DOC.ETD 9(5882) Elastomer insultated flexible cables for use in mines (first revision of IS 14494)
3 DOC.ETD 9(6507) Areial bunched cables-for working voltages upto and including 1 100 Volts - Specification (First revision of iS 14255)
34
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 10 PRIMARY CELLS AND BATTERIES
To prepare standards for cells and batteries particularly those relating to the specification, checking of their dimensions and characteristics and to provide guidance on matters of safety
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Dec 2010 3IS 586:1976 Leclanche type dry batteries for telecommunications,signalling and general purposes (third revision)
2 Dec 2010 2IS 2083:1991 Flashlights (second revision)
3 Dec 2010 2IS 2652:1976 Schedule of terminals for leclanche type primary batteries (first revision)
4 Dec 2010 6* IS 6303:1984
| IEC 86-1(1972)
General requirements and methods of tests for dry cells and batteries
5 Jan 2013IS 6303(Part 4):2013
| IEC 60086-4:2007
Primary batteries – Part 4: Safety of lithium batteries
6 Feb 2013 2* IS 8144:1997
| IEC 86-2(1972)
Multipurpose dry batteries (First revision)
7 Mar 2009 2* IS 9128:1999 Heavy duty dry batteries (first revision)
8 Mar 2009IS 11675:1986
| IEC 86-2(1982)
Button cells - Silver oxide
9 Aug 2011IS 15063:2001
| IEC 86-2(1994)
Alkaline manganese dioxide cells
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 10(6258) Primary Batteries Part 1: General (Second Revision of IS 6303)
2 DOC.ETD 10(6259) Primary Batteries: Part 2 Physical and electrical specification (Second Revision of IS 8144 and 9128)
3 DOC.ETD 10(6276) Primary batteries – Part 5: Safety of batteries with aqueous electrolyte [IEC 60086-5(2005)]
35
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 11 SECONDARY CELLS AND BATTERIES
To prepare standards for all rechargeable cells and batteries (starter batteries, stationary batteries, traction batteries etc.)
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Dec 2008IS 1145:1980 Lead-acid storage batteries for motor cycles, auto-rickshaws and similar vehicles (second revision)
2 Dec 2008 3IS 1146:1981 Rubber and plastic containers for lead-acid storage batteries (second revision)
3 Sep 2012 1* IS 1651:1991 Stationary cells and batteries, lead-acid type (with tubular positive plates) (third revision) (superseding IS:541)
4 Sep 2012 2* IS 1652:1991 Stationary cells and batteries, lead-acid type with plante positive plates (third revision) (superseding IS:541)
5 Dec 2008 3IS 2512:1978 Miners cap lamp batteries (lead-acid type) (first revision)
6 Dec 2008 2IS 5154:1980
| IEC 254(1967)
Lead-acid traction batteries (first revision)
7 Sep 2012 2IS 6071:1986 Synthetic separators for lead-acid batteries (first revision)
8 Sep 2012 1IS 6304:1992 Stationary batteries lead-acid type with pasted positive plates (second revision)
9 Dec 2008 3IS 6848:1979
| IEC 77(1968)
Lead-acid batteries for train lighting and airconditioning services (first revision)
10 Sep 2012 3* IS 7372:1995
| IEC 95-1(1988)
Lead-acid storage batteries for motor vehicles (first revision)
11 Dec 2008IS 7624:1990
| IEC 95-1(1980)
Lead-acid starter batteries for diesel locomotives and rail cars (first revision)
12 Dec 2008IS 7660:1988 Lead-acid batteries for electric locomotives and electrical multiple units (first revision)
13 Jul 2010IS 8320:2000 General requirements and methods of test for lead-acid storage batteries (second revision)
14 Dec 2008IS 9814:1981 Lead-acid storage batteries for marine use
15 Dec 2008IS 10893:1984 Sealed nickel-cadmium button type rechargeable single cell
16 Dec 2008 2IS 10918:1984
| IEC 623(1978)
Vented type nickel cadmium batteries
17 Sep 2012IS 12013:1987 Lead-acid batteries for 110 volts train lighting system with monobloc containers
18 Sep 2012IS 13300:1992 Nickel -cadmium aircraft batteries (aerobatic and non-aerobatic)
36
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 Sep 2012IS 13315:1992
| IEC 623(1983)
Nickel -cadmium batteries for electric locomotives
20 Sep 2012 2IS 13369:1992 Stationary lead - acid batteries (with tubular positive plates) in monobloc containers
21 Sep 2012 2IS 13514:1992 Lead-acid batteries for electric road vehicles
22 Sep 2012 1IS 13568:1992 Lead -acid light weight storage batteries for motor cycles and similar vehicles fitted with ac circuitry
23 Sep 2012IS 13595:1992 Silver-oxide-zinc batteries for aircraft
24 Dec 2008IS 14217:1994 Miner's cap lamp batteries (alkaline type)
25 Dec 2008IS 14218:1994
| IEC 285(1983)
Sealed cylindrical type rechargeable nickel cadmium cells
26 Dec 2008 1IS 14257:1995
| IEC 95-1(1988)
Lead-acid storage batteries for motor vehicles with light weight and high cranking performance
27 May 2010IS 14782:2000 Code of practice for maintenance and testing of large lead- acid batteries for generating systems and substations
28 Jun 2010 1IS 15549:2005 Stationary valve regulated lead acid batteries - Specification
29 Jun 2013IS 15767:2008
/ IEC 62259:2003
Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes – Nickel-Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination
30 IS 16046:2012
/ IEC 62133(2002)
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
31 IS 16047:2012
/ IEC 61960 (2011)
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 11(6166) Stationary cells and batteries, lead-acid type (with tubular positive plates) - Specification (fourth revision of IS 1651)
2 DOC.ETD 11(6167) Stationary cells and batteries, lead-acid type with plante positive plates - Specification (fourth revision of IS 1652)
3 DOC.ETD 11(6204) Lead-acid traction batteries – Part 1: General requirements and methods of test [IEC 60254-1(2005)
4 DOC.ETD 11(6205) Lead-acid traction batteries – Part 2: Dimensions of cells and terminals and marking of polarity on cells [IEC 60254-2(2008)
5 DOC.ETD 11(6367) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Sealed nickel-cadmium prismatic Rechargeable single cells
6 DOC.ETD 11(6369) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells – Part 1: nickel-cadmium
37
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
7 DOC.ETD 11(6370) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells –Part 2: nickel-metal hydride
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 11(6497) Secondary Cells and Batteries for Solar Photovoltaic Application ─ General Requirements and Methods of Test
2 DOC.ETD 11(6561) Lead -acid storage batteries for motor vehicles - Flooded type (Second Rrevision of IS 7372)
3 DOC.ETD 11(6562) Stationary lead acid storage batteries for motor vehicles - Valve regulated type
4 DOC.ETD 11(6634) Secondary batteries (except lithium) for the propulsion of electric road vehicles – Performance and endurance tests (First Revision) (IEC 61982:2012 )
5 DOC.ETD 11(6635) General purpose lead-acid batteries (valve-regulated types) – Part 1: General requirements, functional characteristics – Methods of test’ (IEC 61056-1:2012)
38
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 12 MEASURING EQUIPEMENT FOR BASIC ELECTRICAL QUANTITIES
To prepare standards for direct and indirect acting analogue and digital indicating and recording instruments and their accessories, also transducers having electrical inputs and outputs for measuring electrical quantities by any method on direct current and alternating current at distribution system frequencies and their harmonics
To prepare standards for primary reference apparatus, operating on direct current and alternating current at distribution frequencies and their harmonics for the purpose of measurement, traceability and intercomparison
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Sep 2008IS 1248(Part 1):2003
| IEC 600 51-1(1997)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 1 General requirements (fourth revision)
2 Aug 2008 1IS 1248(Part 2):2003
| IEC 600 51-2(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 2 Ammeters and voltmeters (third revision)
3 Aug 2012 1IS 1248(Part 3):2003
| IEC 600 51-3(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 3 Wattmeters and varmeters (third revision)
4 Aug 2008 1IS 1248(Part 4):2003
| IEC 600 51-4(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 4 Frequency meters (third revision)
5 Aug 2008 1IS 1248(Part 5):2003
| IEC 600 51-5(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 5 Phase meters, power factor meters and synchroscope (third revision)
6 Aug 2008IS 1248(Part 6):2003
| IEC 600 51-6(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 6 Ohmmeters (impedance meters) and conductance meters (third revision)
7 Aug 2008 1IS 1248(Part 7):2003
| IEC 600 51-7(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 7 Multifunction instruments (third revision)
8 Sep 2008 1IS 1248(Part 8):2003
| IEC 600 51-8(1984)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 8 Accessories (third revision)
9 Dec 2008IS 1248(Part 9):2003
| IEC 600 51-9(1988)
Direct acting indicating analogue electrical measuring instruments and their accessories: Part 9 Test methods (third revision)
10 Aug 2012IS 1765:1980
| IEC 60523:1975
Direct current potentiometers (second revision)
11 Aug 2012 1IS 2419:2012
| IEC 61554 : 1999
Panel Mounted Equipment — Electrical Measuring Instrument —Dimensions For Panel Mounting ( Second Revision )
12 Jan 2010 1IS 2442:1963 dc moving coil galvanometers
13 Jan 2010* IS 2992:1987 Insulation resistance testers, hand operated (magneto generator type) (second revision)
39
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
14 Aug 2012IS 3602:1966 Recommendations for the design of scales and indexes for indicating instrumentsfor scales of 1 to 2 percent resolution
15 Jan 2010IS 3635:1966 Methods of test for resistance of metallic electrical resistance material
16 Jan 2010IS 3636:1966 Method of test for temperature co-efficient of precision resistor wires
17 Jan 2010IS 6236:1971
| IEC 60258(1968)
Direct recording electrical measuring instruments
18 Jan 2010IS 7889:1975 Vibration galvanometers
19 Jan 2010IS 7890:1975 Ballistic galvanometers
20 Jan 2010 3IS 7914:1975
| IEC 60428(1973)
Standard cells
21 Jan 2010IS 8143:1976 Plugs and keys for resistance boxes
22 Jan 2010 1IS 8160:1976 Tangent galvanometers
23 Jan 2010IS 8197:1976 Terminal markings for electrical measuring instruments and their accessories
24 Aug 2012IS 8525:1977 Recommendations for design of linear scales and indexes for indicating instruments to be read to 0.33-1.25 percent resolution.
25 Jan 2010IS 8945:1987 Electrical measuring instruments for explosive gas atmospheres (First Revision)
26 Jan 2010 1IS 9051:1979 Specification for Rheostats
27 Jan 2010* IS 9223:1989 Portable earth resistance meters (first revision)
28 Aug 2012IS 9249(Part 1):1979
| IEC 60414(1973)
Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 1 Common safety requirements for instruments
29 Aug 2012IS 9249(Part 2):1982
| IEC 60414((1973)
Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 2 Safety requirements for instruments using a mains supply
30 Aug 2012IS 10659:1983
| IEC 60564(1977)
Specification for Direct current bridges for measuring resistance (superseding IS:1565)
31 Aug 2012IS 11067:1984 Direct current standard resistors
32 Aug 2012IS 11212:1985 Direct current resistive volt ratio boxes
33 Aug 2012IS 11287:1985 Bridge insulation testers (Magneto generator type)
34 Aug 2012* IS 11994:1986 Portable insulation resistance tester (mains operated)
40
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
35 Jan 2010IS 12312:1987
| IEC 60618
Inductive voltage dividers
36 May 2012IS 14570:2012
/ IEC 60688:1992
Electrical measuring transducers for converting AC electrical quantities to to analogue or digital signals
37 Jul 2008IS 14571:1998
/ IEC 61028(1991)
Electrical measuring Instruments X-Y recorders.
38 May 2012IS 61557(Part 1):2007
/ IEC 61557-1(2007)
Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitorin or protective measurs - Part 1: Genral requirments IEC 61557-1 (Superseding IS 2992)
39 May 2012IS 61557(Part 2):2007
/ IEC 61557-2(2007)
Electrical safety in low voltage distribance systems UP to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring or protective measures Part 2 Insulation resistance IEC 61557-2(Superseding IS 11994)
40 Apr 2012IS 61557(Part 5):2007
/ IEC 61157-5(2007)
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment dor testing, measuring or monitoring or protective measures - Part 5: Resistance to earth IEC 61557-5 (Superseding IS 9223)
41
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 13 EQUIPMENT FOR ELECTRICAL ENERGY MEASUREMENT TARIFF AND LOAD CONTROL
To prepare international standards for equipment for electrical energy measurement, tariff - and load control, customer infromation, payment, local and/or remote data exchange, using electromechanical and/or electronic, technologies for applications ranging from electrical energy generation to residential. The standards may include requirements and test methods to cover mechanical, environmental, electrical, safety, metrology dependability aspects as well as functional requirements and data models.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Oct 2008IS 1766:1998
| IEC 61038:1992
Time swtiches for metering and load control (second revision)
2 Sep 2010IS 7700:1975 Quadrature phase-shifting voltage transformers
3 Sep 2010IS 8530:1977
| IEC 60211:1966
Maximum demand indicators (class 1)
4 Jan 2010IS 9792(Part 1):2005 Guide for testing, calibration and maintenance of ac electricity meters: Part 1Single phase whole current watthour meters, Class 2 (first revision)
5 Apr 2011IS 11426(Part 1):2006 Alternating current precision electricity meters for testing purposes: Part 1 Requirements for electro-mechanical meters (first revision)
6 Jul 2010IS 11448:2000 Application guide for ac electricity meters(first revision)
7 Jul 2009IS 12346:1999
| IEC 60736:1982
Testing equipment for ac electrical energy meters(first revision)
8 Sep 2012 2** IS 13010:2002
| IEC 60521:1988
AC watt-hour meters, Class 0.5, 1 and 2(first revision)
9 Oct 2009 4** IS 13779:1999
| IEC 61036:1996
AC static watthour meters (Class 1 and 2)(first revision)
10 Sep 2009IS 14372:1996 Volt-ampere hour meters for full power factor range [superseding IS:722(Part 7/Sections 1, 2 and 3)-1987]
11 Dec 2012IS 14415:1997
| IEC 60211:1996
Volt-Amphere hour meters for restricted power factor range - specification [superseding IS:722 (Part 5):1980
12 Jan 2013IS 14451(Part 1):1998
| IEC 60338:1970
Telemetering of consumption and demand:Part 1 Impulse transmitting and receiving devices
13 Jul 2009IS 14451(Part 2):1999
| IEC 60338:1970
Telemetering for Consumption and Demands Part 2 Direct digital transfer of meter values
14 Oct 2009 3** IS 14697:1999
| IEC 60687:1992
ac static transformer operated watthour and var-hour meters, class 0.2S and .5S-Specification
15 Nov 2011IS 15707:2006 Testing, evaluation, installation and maintenance of ac electricity meters - Code of Practice
16 IS 15884:2010 Alternating current direct connected static pre-payment meters for active energy (Class 1 & 2) - Specification
17 1IS 15959:2011 Electricity Metering - Data Exchange for meter reading, tariff and load control - Companion Specification
42
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 IS 62051(Part 1):2004
/ IS/IEC 62051-1:2004
Electricity Metering - Data exchange for meter reading tariff and load control Part 1 Terms relate to data exchange with metering equipment using DLMS/COSEMV (IEC 62051-1:2004)
19 IS 62056(Part 21):2002
/ IS/IEC 62056-21:2002
Electricity Metering Data exchangefor meter reading, tariff and load control- Part 21 direct local data exchange (IEC 62056-21:2002)
20 IS 62056(Part 42):2002
/ IS/IEC 62056-42:2002
Electricity metering Data exchange for meter reading tariff and load control -Part 42 Physical layer services and procedures for connection-oriented asynchronous data exchange. (IEC 62056-42:2002)
21 IS 62056(Part 46):2007
/ IS/IEC 62056-46:2007
Electricity metering Data exchange for meter reading tariff and load control -Part 46 Data link layer using HDLC protocol (IEC 62056-46:2007)
22 IS 62056(Part 47):2006
/ IS/IEC 62056-47:2006
Electricity Metering - Data Exchange for meter reading, tariff and load control Part 47 COSEM transport layers for IPv4 networks
23 IS 62056(Part 53):2006
/ IS/IEC 62056-53:2006
Electricity metering Data exchange for meter reading tariff and load control -Part 53 COSEM application layer'(IEC 62056-53:2006)
24 IS 62056(Part 61):2006
/ IS/IEC 62056-61:2006
Electricity metering Data exchange for meter reading tariff and load control -Part 61 Object identification system (OBIS) (IEC 62056-61:2006)
25 IS 62056(Part 62):2006
/ IS/IEC 62056-62:2006
Electricity metering Data exchange for meter reading tariff and load control -Part 62 Interface Classes' (IEC 62056-62:2006)
43
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 14 ELECTRICAL WIRING ACCESSORIES
To prepare standards for electrical wiring accessories ; such as lamp holders, switches, plugs and socket- outlets, connecting devices and conduits and their accessories for electrical installations
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2010 4IS 371:1999 Ceiling roses (third revision)
2 Jun 2010 3IS 1258:2005
| IEC 61184(1997)
Bayonet lamp holders (fourth revision)
3 Jun 2010 5IS 1293:2005
| IEC 60884-1 (2002)
Plugs and socket outlets of rated voltage upto and including 250 volts and rated current upto and including 16 amperes - Specification (third revision)
4 May 2012 2IS 2412:1975 Link clips for electrical wiring (first revision)
5 Apr 2009 6IS 3010(Part 1):1965 Appliance-connectors and appliance-inlets (non-reversible three-pin type): Part 1 Appliance connectors
6 Apr 2009 5IS 3010(Part 2):1965 Appliance-connectors and appliance-inlets(non-reversible three-pin type): Part 2 Appliance inlets
7 Oct 2012 1IS 3323:1980
| IEC 60400(1972)
Bi-pin lampholders for tubular fluorescent lamps (first revision)
8 Jun 2013IS 3324:1982
| IEC 400(1972)
Holders for starters for tubular fluorescent lamps (first revision)
9 May 2012IS 3419:1989 Fittings for rigid non-metallic conduits (second revision)
10 May 2012 1** IS 3480:1966 Flexible steel conduits for electrical wiring
11 May 2012 1IS 3837:1976 Accessories for rigid steel conduits for electrical wiring (first revision)
12 Jul 2012 6* IS 3854:1997
| IEC 60669-1(1998)
Switches for domestic and similar purposes (second revision)
13 Jun 2010IS 4160:2005
| IEC 60884-2-6 (1997)
Interlocking switch socket outlets - Speification (first revision)
14 May 2012IS 4649:1968 Adaptors for flexible steel conduits
15 May 2012 1IS 6896:1973 Connectors (two-way) for railway coach wiring
16 May 2012 2IS 6965:1979 Switches for use in railway coaching stock (first revision)
17 Jun 2013IS 8200:1976 Toggle switches used in traction application
18 Nov 2010 1* IS 9537(Part 1):1980
| IEC 60614-1(1978)
Conduits for electrical installations: Part 1 General requirements
44
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 May 2012 3** IS 9537(Part 2):1981 Conduits for electrical installations:Part 2 Rigid steel conduits (superseding IS:1653)
20 May 2012 2** IS 9537(Part 3):1983
| IEC 60614-2-2(1980)
Conduits for electrical installations: Part 3 Rigid plain conduits of insulating materials (superseding IS:2509)
21 May 2012** IS 9537(Part 4):1983 Conduits for electrical installations: Part 4 Pliable self-recovering conduits of insulating materials
22 Jun 2010* IS 9537(Part 5):2000
| IEC 60614-2-3(1990)
Conduits for a electrical installations: Part 5 Pliable conduits of insulating material (Superseding IS 6946)
23 Mar 2010IS 9537(Part 6):2000
| IEC 60614-2-6(1992)
Conduit for electrical installations: Part 6 Pliable conduits of metal or composit materials
24 Apr 2013IS 9537(Part 8):2003 Conduits for electrical instalations Part 8 Rigid non threadable conduits of aluminium alloy
25 Jun 2013IS 10276(Part 1):1982
| IEC 60238(1975)
Edison screw lampholders : Part 1 Requirements and tests
26 Jun 2013IS 10276(Part 2):1982
| IEC 60238(1975)
Edison screw lampholders : Part 2 Standard data sheets for lamp holders and gauges
27 Aug 2010 3IS 11037:1984 Electronic type fan regulators
28 Mar 2010IS 14763:2000
| IEC 60423(1993)
Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings
29 Nov 2008IS 14768(Part 1):2000
| IEC 61035-1(1990)
Conduit fittings for electrical installations :Part 1 General requirements
30 Feb 2013IS 14768(Part 2):2003
| IEC 61035-2-1(1993)
Conduit fittings for electrical installations : Part 2 Metal conduit fittings (superseding IS 2667)
31 May 2010IS 14772:2000
| IEC 60670-1(1989)
Enclosures for accessories for household and similar fixed electrical installations (Superseding IS 5133(Part 1 and 2)
32 Aug 2012 1IS 14927(Part 1):2001
| IEC 61084-1(1991)
Cable trunking and ducting systems for electrical installations :Part 1 General requirements
33 May 2012IS 14927(Part 2):2001
| IEC 61084-2-1(1996)
Cable trunking and ducting systems for electrical installations: Part 2 Cable trunking and ducting systems instended for mounting on walls or ceilings
34 May 2011 3IS 14930(Part 1):2001
| IEC 61386-1(1996)
Conduit systems for electrical installations :Part 1 General requirements
35 May 2011 2IS 14930(Part 2):2001
| IEC 61386-2(1995)
Conduit systems for electrical installations :Part 2 Particular requirements for conduit system buried underground
36 Jul 2013IS 15368:2003 Cable reels for household and similar purposes
37 Jul 2013IS 15787:2008
| IEC 60884-2-3 (1989)
Switch- socket outlets (Non-Interlock Type)
38 Oct 2012IS 60309(Part 1):2002
/ IEC 60309-1(1999)
Plugs, socket-outlets and couplers for industrial purposes: Part 1 General requirements (first revision)
39 Oct 2012IS 60309(Part 2):2002
/ IEC 60309-2(1999)
Plugs, socket-outlets and couplers for industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories (first revision)
45
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
40 Nov 2012IS 60320(Part 1):2001
/ IEC 60320-1(2001)
Appliance couplers for household and similar general purposes Part 1 General requirements
41 Nov 2012IS 60320(Part 2/Sec 2):1998
/ IEC 60320-2-2(1998)
Appliance couplers for household and similar general purposes part 2-2 Interconnection couplers for household and similar equipment
42 Nov 2012IS 60320(Part 2/Sec 3):2007
| IEC 60320-2-3(1998)
Appliance couplers for household and similar general purposes- part 2-3 Appliance coupler with a degree of protection higher IPXO
43 Sep 2012IS 61058(Part 1):2001
/ IS/IEC 61058-1(2000)
Switches for Appliances: Part 1 General Requirement (IEC 61058-1)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 14(6472) Conduit Systems For Cable Management - Part 1 : General Requirements
2 DOC.ETD 14(6473) Conduit Systems For Cable Management - Part 21 : Rigid Conduit Systems
3 DOC.ETD 14(6474) Conduit Systems For Cable Management - Part 22 : Pliable Conduit Systems
4 DOC.ETD 14(6475) Conduit Systems For Cable Management - Part 23 : Flexible Conduit Systems
5 DOC.ETD 14(6476) Conduit systems for cable management - Part 24 particular requirements conduit systems buried under ground
6 DOC.ETD 14(6485) Cable management — Cable tray systems and cable ladder systems [IEC 61537 (2006)]
7 DOC.ETD 14(6486) Cable cleats for electrical installations [IEC 61914 (2009)]
46
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 15 ROTATING MACHINERY
To prepare standards on rotating electrical machines like induction, synchronous, motors, generators, dc machines and turbines including carbon brushes for electrical machines (with the exception of traction machines and rotating machinery coming under the purview of other Committees)
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Jan 2012 3IS 325:1996
| IEC 60034-1(1983)
Three-phase induction motors(first revision)
2 Feb 2013IS 900:1992 Code of practice for installation and maintenance of induction motors (Second revision)
3 1IS 996:2009 Specification for single phase ac induction motors for general purpose (third revision)
4 Feb 2013 4IS 1231:1974
| IEC 60072 (1971)
Dimensions of three-phase foot-mounted induction motors (third revision)
5 Jan 2012 2IS 2223:1983
| IEC 60072 (1971)
Dimensions of flange mounted ac induction motors (first revision)
6 Jan 2012IS 2253:1974
| IEC 34-7(1972)
Designation for types of construction and mounting arrangement of rotating electrical machines (first revision)
7 Jan 2012IS 2254:1985 Dimensions of vertical shaft motors for pumps (second revision)
8 Jan 2012 1IS 2968:1964 Dimensions of slide rails for electric motors
9 Jan 2012 2IS 2972(Part 1):1979 Textile motors: Part 1 Loom motors (first revision)
10 Jan 2012 1IS 2972(Part 2):1979 Textile motors: Part 2 Card motors (first revision)
11 Jan 2012IS 2972(Part 3):1979 Textile motors: Part 3 Spinning frame motors (first revision)
12 Jan 2012 1IS 3682:1966 Flameproof ac motors for use in mines
13 IS 4029:2010 Guide for testing three-phase induction motors (First Revision)
14 Jan 2012 1IS 4665(Part 1):1984 Portable electric motor-operated tools: Part 1 General requirements and tests (first revision)
15 Jan 2012IS 4665(Part 2):1984 Portable electric motor-operated tools:Part 2 Specific requirements for tools
16 Jan 2012IS 4758:1968 Method of measurement of noise emitted by machines
17 Jan 2012 3IS 4889:1968
| IEC 2 D
Method of determination of efficiency of rotating electrical machines
18 Jan 2012* IS 5422:1996
| IEC 60034-3(1988)
Turbine type generators (first revision)
47
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 Jan 2012IS 6362:1995
/ IEC 60034-6:1991
Designation of methods of cooling of rotating electrical machines
20 Jan 2012IS 7132:1973
| IEC 60034-1(1969)
Guide for testing synchronous machines
21 Jan 2012* IS 7306:1974
| IEC 60034-4(1967)
Methods for determining synchronous machine quantities from tests
22 Jan 2012 2IS 7538:1996 Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications (first revision)
23 Jan 2012IS 7572:1974 Guide for testing single-phase ac and universal motors
24 Jan 2012 2IS 7816:1975 Guide for testing insulation resistance of rotating machines
25 Jan 2012 2IS 8151:1976 Single-speed three-phase induction motors for driving lifts
26 Apr 2009IS 8223:1999
| IEC 60072-2(1990)
Dimensions and output series for rotating electrical machines (first revision)
27 Jan 2012 1IS 8789:1996 Values of performance characteristics for three-phase induction motors (first revision)
28 Jan 2012 4* IS 9283:1995 Motors for submersible pump sets (first revision)
29 Jan 2012 1IS 9320:1979 Guide for testing of direct current (dc) machines
30 Mar 2009 1IS 9582(Part 1):1980 Single-phase electric motors for definite purposes: Part 1 Domestic laundry machine motors
31 Mar 2009IS 9628:1980 Three-phase induction motors with type of protection 'n'
32 Mar 2009IS 9670:1980 Direct current micro motors for cassette tape recorders and other applications
33 Feb 2013IS 9919:1999 Guide for selection and use of carbon brushes for applications in rotating electrical machines
34 Jan 2012IS 10534:1983 Method of measurement of airborne noise emitted by gas turbine installations
35 Jan 2012IS 11537:1985 Centrifugal switch for single phase induction motors
36 Mar 2009 1* IS 12065:1987
| IEC 60034-9
Permissible limits of noise level for rotating electrical machines
37 Mar 2009IS 12066:1987 Three-phase induction motors for machine tools
38 * IS 12075:2008 Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher-measurement, evaluation and limits of vibration severity (first revision)
39 IS 12615:2011 Energy Efficient Three Phase Squirrel Cage Induction Motors (Second Revision)
40 Mar 2009IS 12642:1989
| IEC 60778
Brush-holders for slip rings group R-Type RA
48
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
41 Feb 2013IS 12998(Part 1):1991
/ ISO 1680-1:1986
Method f measurement of airborne noise emitted by rotating machinery: Part 1 Engineering method for free field conditions over a reflecting plane
42 Feb 2013IS 12998(Part 2):1991
/ ISO 1680-2:1986
Method of measurement of airborne noise emitted by rotating machinery: Part 2 Survey method
43 Jan 2012IS 13079:1991 Stepping Motors
44 Feb 2013IS 13107:1991
/ IEC 60279(1969)
Guide for measurement of winding resistance of an ac machine during operation at alternating voltage
45 Feb 2013IS 13364(Part 1):1992
| IEC 60034-1
Specification for ac generators driven by reciprocating internal combustion engine: Part 1 Rated up to 20 kVA
46 Feb 2013IS 13364(Part 2):1992
| IEC 60341(1983)
Specification for ac generators driven by reciprocating internal combustion engine: Part 2 Rated above 20 kVA and upto 1250 kVA
47 Feb 2013IS 13466:1992
| IEC 60136, 467, 773
Specification for brushes for electrical machines [superseding IS:3003 (Parts 3 and 4)-1977]
48 Feb 2013IS 13525:1992 Flexible conductors for carbon brushes
49 Feb 2013* IS 13529:1992
| IEC 600892(1987)
Guide on effects of unbalanced voltages on the performance of three-phase cage induction motors
50 Mar 2009IS 13555:1993 Guide for selection and application of three-phase ac induction motors for different types of driven equipment
51 Mar 2009IS 13584:1993
| IEC 413(1972)
Specification for brush materials for electrical machinery [Superseding IS 3003(Part 2):1977]
52 Mar 2009IS 13586:1993
| IEC 276(1968)
Definitions and nomenclature for carbon brushes, brush holders, commutators and slip rings for rotating electrical machinery (superseding IS:3003(Part 1)-1977)
53 Jan 2012IS 13937(Part 1):1994
/ ISO 7574-1:1985
Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 1 General conditions and definitions
54 Jan 2012IS 13937(Part 2):1994
/ ISO 7574-2:1985
Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 2 Methods of stated values for individual machines
55 Jan 2012IS 13937(Part 3):1994
/ ISO 7574-3:1985
Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 3 Simple (transition) method for stated values for batches of machines
56 Jan 2012IS 13937(Part 4):1994
/ ISO 7574-1985
Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 4 Methods for stated values for batches of machines
57 Jan 2012IS 14195:1994
/ IEC 61015(1990)
Brush-holders for electrical machines guide to the measurement of the static thrust applied to brush
58 Jan 2012IS 14196:1994
/ IEC 60560(1977)
Definitions and terminology of brush-holders for electrical machines
59 Jan 2012 1IS 14197:1994
/ IEC 60193:1965
Code for model acceptance tests of hydraulic turbines
49
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
60 Jan 2012IS 14198(Part 1):1994
/ IEC 60953-1:1990
Rules for steam turbines thermal acceptance tests - Method A
61 Jan 2012IS 14198(Part 2):1994
/ IEC 60953-2:1990
Rules for steam turbines thermal acceptance tests - Method B
62 Jan 2012IS 14205(Part 1):1994
/ IEC 60045-1:1991
Steam turbines Part 1 Specification
63 Jan 2012IS 14222:1995
/ IEC 60034-15:1990
Impulse withstand levels of rotating ac machines with form wound stator coils
64 Jan 2012IS 14376:1996
| IEC 136(1986)
Brush holders for electrical machines
65 Jan 2012IS 14377:1996 Induction motors for fan used in air-conditioning and ventilation
66 Jul 2008IS 14568(Part 2):1998
/ IEC 60072-2(1990)
Dimensions and output series for rotating electrical machines Part 2 Frame numbers 355 to 1000 and flange numbers 1180 to 2360
67 Feb 2009IS 14569:1999 Commutators for electrical machines
68 Mar 2009 1IS 14578:1999 Three-phase induction motors for use in nuclear power plants
69 Mar 2013 1IS 14582:1998 Single-phase small a.c. electric motors for centrifugal pumps for agricultural applications
70 Dec 2010IS 14889:2000 Copper tamping powder for carbon brushes
71 Jun 2009IS 15429:2004 Storage, installation and maintenance of DC motors - Code of practice
72 Apr 2011IS 15664:2006
/ ISO 2314(1989)
Gas turbines - Acceptance tests
73 Apr 2011IS 15665:2006
/ ISO 11086(1996)
Gas turbines - Vocabulary
74 Apr 2011IS 15666(Part 1):2006
/ ISO 3977-1(1997)
Gas turbines - Procurement - Part 1: General introduction and definitions
75 Apr 2011IS 15666(Part 2):2006
/ ISO 3977-2(1997)
Gas turbines - Procurement - Part 2: Standard reference conditions and ratings
76 Apr 2011IS 15666(Part 3):2006
/ ISO 3977-3(2004)
Gas turbines - Procurement - Part 3: Design requirements
77 Apr 2011IS 15666(Part 4):2006
/ ISO 3977-4(2002)
Gas turbines - Procurement - Part 4: Fuels and environment
78 Apr 2011IS 15666(Part 5):2006
/ ISO 3977-5(2001)
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
79 Apr 2011IS 15666(Part 7):2006
/ ISO 3977-5(2002)
Gas turbines - Procurement - Part 7: Technical information
80 Apr 2011IS 15666(Part 8):2006
/ ISO 3977-8(2002)
Gas turbines - Procurement - Part 8: Inspection, testing, installation and commissioning
81 Apr 2011IS 15666(Part 9):2006
/ ISO 3977-9(1999)
Gas turbines - Procurement - Part 9: Reliability, availability, maintainability and safety
50
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
82 Apr 2011IS 15667:2006
/ ISO 19860(2005)
Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations
83 IS 15880:2009 Three phase cage induction motors when fed from IGBT converters - Application Guide
84 IS 15881:2009 Three phase cage induction motors specifically designed for IGBT converter supply
85 IS 15999(Part 2/Sec 1):2011 Rotating Electrical Machines Part 2 Method of Tests Section 1 Standard Methods for Determining Losses and Efficiency from Tests (Excluding Machines for Traction Vehicles)
86 Oct 2012IS 60034(Part 1):2004
/ IS/IEC 60034-1(2004)
Rotating electrical machines - Part 1 Rating and performance
87 IS 60034(Part 5):2000
/ IS/IEC 60034-5(2000)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Superseding IS 4691)
88 IS 60034(Part 8):2002
/ IS/IEC 60034-8(2002)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation (Superseding IS 4728)
89 Jun 2010IS 60041:2000
/ IS/IEC 60041(2000)
Field acceptance tests to determine the hydraulic performance of turbines, storage pumps and pump turbines
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 15(5941) Motors for Submersible Pumpsets - Specification (second revision of IS 9283)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 15(6489) Rotating electrical machines – Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines (Second Revision of IS 5422) [IEC 60034-3(2007)]
2 DOC.ETD 15(6490) Rotating electrical machines – Part 4: Methods for determining synchronous machine quantities from tests (First Revision of IS 7306) [IEC 60034-4(2008)]
3 DOC.ETD 15(6491) Rotating electrical machines – Part 9: Noise limits (First Revision of IS 12065) [IEC 60034-9(2007)]
4 DOC.ETD 15(6492) Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity (Second Revision of IS 12-75) [IEC 60034-14(2007)]
5 DOC.ETD 15(6493) Rotating electrical machines – Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines (First Revision of IS 14222) [IEC 60034-15(2009)]
6 DOC.ETD 15(6494) Rotating electrical machines – Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors (First Revision of IS 13529) [IEC 60034-26(2006)]
7 DOC.ETD 15(6517) Rotating electrical machines – Part 1: Rating and performance (First Revision of IS/IEC 60034-1) (IEC 60034-1:2010)
51
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
8 DOC.ETD 15(6518) Acoustics – Test code for the measurement of airborne noise emitte4d by rotating electrical machines performance [First Revision of IS 12998 (Part 1 & 2)] (ISO 1680:1999)
DRAFT STANDARDS FORMULATED
1 DOC.ETD 15(6501) Rotating Electrical Machines: Specification for Terminal Boxes for 3 Phase Rotating Electrical Machines
2 DOC.ETD 15(6506) Electric Traction Lifts Part 10 Poly Phase Electric Motors for Driving Electric Traction Lifts
52
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 16 TRANSFORMERS
To prepare standards on power and distribution transformers, reactors, on-load tap changers, etc, without limitation on voltage or power. Transformer accessories and voltage stablizers, testing transformers and furnace transformers are included.
(Instrument transformers, welding transformers and traction transformers are excluded)
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Jul 2008 1* IS 1180(Part 1):1989 Outdoor type three-phase distribution transformers upto and including 100 kVA 11 kV:Part 1 Non-sealed type (third revision)
2 Jul 2008* IS 1180(Part 2):1989 Outdoor type three-phase distribution transformers upto and including 100 kVA 11 kV:Part 2 Sealed type (first revision)
3 Jul 2011* IS 2026(Part 1):2011
| IEC 60076-1(2000)
Power transformers: Part 1 General (first revision)
4 IS 2026(Part 2):2010
| IEC 60076-2(1993)
Power Transformers - Part 2 Temperature rise (first revision)
5 IS 2026(Part 3):2009
/ IEC 60076-3 (2000)
Power Transformers - Part 3 Insulaiton levels, dielectric tests and external clearances in air (third revision)
6 Jul 2011 2IS 2026(Part 4):1977
| IEC 60076(1977)
Power transformers: Part 4 Terminal marking,tappings and connections (first revision)
7 IS 2026(Part 5):2011
| IEC 60076-5(2006)
Power Transformers - Part 5 Ability to withstand short circuit (first revision)
8 IS 2026(Part 7):2009
/ IEC 60076-7(2005)
Power Transformers - Part 7 Loading guide for oil immersed power transformers
9 IS 2026(Part 8):2009
/ IEC 60076-8(1997)
Power Transformers - Part 8 Application guide
10 IS 2026(Part 10):2009
/ IS/IEC60076-10(2001)
Power Transformers - Part 10 Determination of sound levels
11 Jul 2011IS 2772:1982 Non-flameproof mining transformers for use below ground (first revision)
12 Jul 2011IS 3151:1982
| IEC 60289(1968)
Earthing transformers (first revision)
13 Jul 2011IS 3639:1966 Fittings and accessories for power transformers
14 Jul 2011 2IS 5142:1969 Continuously variable voltage auto transformers
15 Jul 2008IS 5553(Part 1):1989
| IEC 60289(1988)
Reactors: Part 1 General
16 Jul 2008IS 5553(Part 2):1990
| IEC 60 289(1988)
Reactors: Part 2 Shunt reactors
17 Jul 2008IS 5553(Part 3):1990
| IEC 60289(1988)
Reactors: Part 3 Current limiting reactors and neutral earthing reactors
53
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 Nov 2009IS 5553(Part 4):1990
| IEC 60289(1988)
Reactors: Part 4 Damping reactors
19 Nov 2009IS 5553(Part 5):1989
| IEC 60289(1988)
Reactors: Part 5 Tuning reactors
20 Jul 2011IS 5553(Part 6):1991
| IEC 60289(1988)
Reactors: Part 6 Earthing transformers (Neutral couplers)
21 Nov 2009IS 5553(Part 7):1990
| IEC 60289(1988)
Reactors: Part 7 Arc supression reactors
22 Nov 2009IS 5553(Part 8):1990
| IEC 60289(1988)
Reactors: Part 8 Smoothing reactors
23 Jul 2011IS 6600:1972 Guide for loading of oil immersed transformers
24 Jul 2008 1IS 8447:1989 Manually operated voltage regulators for domestic use (first revision)
25 Jul 2008 2IS 8448:1989 Automatic line voltage correctors (step type for domestic use) (first revision)
26 Jul 2011 1IS 8468:1977 On-load tap changers
27 Jul 2011IS 8478:1977 Application guide for on-load tap changers
28 Jul 2011IS 9147:1979 Cable sealing boxes for oil immersed transformers suitable for paper insulated lead sheathed cables for highest system voltages from 12 kV upto and including 36 kV
29 Nov 2009IS 9815(Part 1):1994 Servo-motor operated automatic line voltage correctors: Part 1 Correctors for single phase applications (second revision)
30 Jul 2011IS 10028(Part 1):1985 Code of practice for selection, installation and maintenance of transformers: Part 1 Selection
31 Jul 2011IS 10028(Part 2):1981 Code of practice for selection, installation and maintenance of transformers; Part 2 Installation (superseding IS:1886)
32 Jul 2008 1IS 10028(Part 3):1981 Code of practice for selection, installation and maintenance of transformers: Part 3 Maintenance (superseding IS:1886)
33 Jul 2011IS 10161:1982 Moving coil voltage regulators
34 Jul 2011IS 10561:1983
| IEC 606 (1978)
Application guide for power transformers
35 Jul 2011IS 11171:1985
| IEC 60726(1982)
Dry type power transformers
36 Jul 2011IS 11333:1985 Flameproof dry type transformers for use in mines
37 Nov 2009IS 12977:1990 Arc furnance transformers
38 Nov 2009IS 13956:1994 Testing transformers
54
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
39 Nov 2009IS 13964:1994
| IEC 551 (1976)
Methods of measurement of transformer and reactor sound levels
40 IS 61558(Part 1):1997
/ IS/IEC 61558-1(1997)
Safety of power Transformer,power supply units and similar: Part 1 General requirement and test
41 IS 61558(Part 2/Sec 6):1997
/ IS/IEC 61558-2-6(97)
Safety of power Transformers, power supply units and similar: Part 2 particular requirements, Section 6 Safety Isolating transformers for general use
42 IS 61558(Part 2/Sec 7):2007
/ IS/IEC 61558-2-7(07)
Safety of power Transformers, power supply units and similar part 2-7: Particulars requirements for transformers for toys
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 16(6117) Outdoor type three-phase distribution transformers up to and including 100 KVA, 33 KV Part 1 Non-seald type [Fourth Revision of IS 1180(Part 1)]
2 DOC.ETD 16(6118) Outdoor type three-phase distribution transformers up to and including 200 KVA, 33 KV Part 2: Seald type [Second Revision of IS 1180(Part 2 )]
3 DOC.ETD 16(6636) Power Transformers - Part 1 General [second revision of IS 2026 (Part 1)] ) [IEC 60076-1:2011]
4 DOC.ETD 16(6637) Power Transformers - Part 6: Reactors [IEC 60076-6:2007]
55
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 18 INDUSTRIAL PROCESS MEASUREMENT AND CONTROL
To prepare standards for systems and elements used for industrial process measurement and control concerning continuous and batch processes
To coordinate the standardization of those features of related elements which affect suitability for integration into such systems operating with electrical, pneumatic, hydraulics mechanical or other systems of measurements and/or control
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Sep 2008IS 2053:1974 Thermocouple pyrometers (first revision)
2 Sep 2010 2* IS 2054:1962 Reference tables for nickel/chromium-nickel/aluminium thermocouples
3 Sep 2010 2* IS 2055:1962 Reference tables for platinum/rhodium-platinum thermocouples
4 Sep 2010 2* IS 2056:1962 Reference tables for copper-constant thermocouples
5 Sep 2010 2* IS 2057:1962 Reference tables for iron-constant thermocouples
6 Sep 2008 1IS 2711:1979 Direct reading pH meters (second revision)
7 Apr 2013IS 2806:1992 Guide to electrical resistance thermometry (first revision)
8 May 2011IS 2848:1986 Industrial platinum resistance thermometer sensors (first revision)
9 Apr 2013IS 3624:1987 Pressure and vacuum gauges (second revision)
10 Sep 2010IS 3944:1982 Methods for determination of flowtime by use of flow cups (first revision)
11 Sep 2008IS 4309:1979 Method of measurement on direct reading pH meters (first revision)
12 Sep 2008IS 5883:1970 Nickel resistance thermometer elements
13 Sep 2008* IS 6720:1972 Reference tables for plantinum/30 percent rhodium-platinum/6 percent rhodium thermocouples
14 Sep 2008IS 6804:1972 Glass electrodes for direct reading pH meters
15 Sep 2010IS 7358:1984 Thermocouples (first revision)
16 Sep 2008IS 7722:1975 Analogue pneumatic signals for process control systems
17 Sep 2010IS 7728:1984 Analogue dc current signals for process control systems (first revision)
18 Sep 2008* IS 7988:1976 Reference tables for chromel-kopel thermocouples
56
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 Sep 2008IS 8018:1976 Platinum and platinum alloy wires for thermocouple elements
20 Sep 2008IS 8457:1977 Tyre pressure gauges for automobiles (Pocket type)
21 Sep 2010IS 8493:1977 Analogue dc voltage signals for industrial process measurements and control systems
22 Sep 2008IS 8495(Part 1):1977 Ceramic components for thermocouples and resistance thermometers: Part 1 Terminal blocks
23 Apr 2013IS 8784:1987 Thermocouple compensating cable (second revision)
24 Sep 2008 1IS 8824(Part 1):1978 Electrical moisture meters: Part 1 For foodgrains
25 Sep 2010IS 8824(Part 2):1988 Electrical moisture meters: Part 2 For jute (conductivity type)
26 Sep 2010IS 8935:1985 Electric solenoid operated actuators (first revision)
27 Mar 2011IS 8992:1978
| IEC 60396(1972)
Test methods for induction furnaces with submerged channels
28 Mar 2011IS 9021:1978
| IEC 60398(1972)
General test conditions for industrial electro-heating equipment
29 Mar 2011 1IS 9029:1978
| IEC 60397(1972)
Methods of tests for batch furnaces with metallic heating resistors
30 Mar 2011** IS 9050:1979
| IEC 60239(1967)
Nominal dimensions of cylindrical machines graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces.
31 Mar 2011IS 9080(Part 1):1979 Safety requirements in electro-heat installations:Part 1 General requirements
32 Mar 2011** IS 9080(Part 2/Sec 1):1979
| IEC 60519-2(1975)
Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment,Section 1 Protection in directresistance heating installations
33 Mar 2011** IS 9080(Part 2/Sec 2):1980 Safety requirements in electro-heat installations:Part 2 Particular requirements for resistance heating equipment , Section 2 Protection in indirect resistance heating installations
34 Mar 2011** IS 9080(Part 2/Sec 3):1981
| IEC 60519-2(1975)
Safety requirements in electro-heat installations:Part 2 Particular requirements for resistance heating equipment,Section 3 Protection in potassium and sodium nitrate and nitrite bath furnaces
35 Mar 2011** IS 9080(Part 2/Sec 4):1981
| IEC 60519-2(1975)
Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment, Section 4 Protection in installations used for drying varnishes and other similar products
36 Mar 2011** IS 9080(Part 4):1981
| IEC 60519-4(1977)
Safety requirements in electro-heat installations:Part 4 Particular requirements for arc furnace installations.
57
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
37 Sep 2008IS 9319:1979 Electronic self-balancing potentiometric indicators and recorders
38 May 2011IS 9334:1986 Electric motor operated actuators (first revision)
39 May 2011IS 9347:1979 Charts for recording instruments
40 Sep 2008IS 9463:1980 Electronic self-balancing bridge indicators and recorders
41 Mar 2011IS 10098:1982
| IEC 60240(1967)
General requirements for electric infra-red emitters for heating purposes.
42 Mar 2011** IS 10122:1982
| IEC 60545(1979)
Methods of tests for crucible induction furnaces
43 Sep 2008 1IS 10144:1982 Electronic speed limiters for diesel vehicles
44 Sep 2008* IS 10189(Part 1):1982 Industrial process control valves: Part 1 General requirements and tests
45 Sep 2008* IS 10189(Part 2/Sec 1):1993
| IEC 60534-2-1(1978)
Industrial process control valves: Part 2 Flow capacity, Section 1 Sizing equations for incompressible fluid flow under installed conditions
46 Sep 2008** IS 10189(Part 2/Sec 2):1993
| IEC60534-2-2(1980)
Industrial process control valves: Part 2 Flow capacity SectIon 2 Sizing equations for compressible fluid flow under installed conditions
47 Sep 2008IS 10189(Part 2/Sec 1):2000
/ IEC 60534-2-1:1998
Industrial process control valves Part2/Sec 1 Flow Capacity-sizing Equations for fluid flow under Installed conditions (superseding of IS 10189(Part 2/Sec 1):1992
48 Mar 2011** IS 10215:1982
| IEC 60683(1980)
Methods of tests for submerged arc furnaces
49 May 2011IS 10398:1982 Zener barrier for intrinsically safe process control instruments
50 Sep 2010* IS 10625:1983 Reference tables for nickel/chromium-copper/nickel (chromel-constantan) thermocouples
51 May 2011IS 10639:1983 Disappearing filament type optical pyrometers
52 Sep 2010IS 11222:1985 Dials, scales and indexes for indicating analogue measuring instruments
53 Feb 2013IS 11692:1986
| IEC 27(CO)60
Method of tests for electro-slag remelting furnaces
54 Feb 2013IS 11712:1986
| IEC 27(CO)1959
Safety requirements for electro-slag remelting furnaces.
55 Sep 2008** IS 12051:1987 Reference tables for nickel-chromium-silicon (Nicrosil/Nisil) Type N Thermocouples
56 Feb 2013IS 12188:1987 Electric direct-arc melting furnaces
57 Sep 2008IS 12434:1988 Coating/plating thickness tester, destructive type
58 Sep 2008IS 12554(Part 1):1988 Non-destructive coating thickness testing instruments: Part 1 Eddy current instruments
58
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
59 Aug 2009IS 12554(Part 2):1999 Non-destructive coating thickness testing instruments: Part 2 Magnetic instruments
60 Sep 2008IS 12555:1988 Signal conditioning devices for process control systems
61 Sep 2008IS 12556:1988 Binary direct voltage signals for process measurement and control systems
62 Sep 2008IS 12579:1988 Base-metal mineral insulated thermocouple cables and thermocouples
63 May 2011IS 13122(Part 1):1993 Transmitters for use in industrial process control systems: Part 1 Methods for evaluating the performance
64 May 2011IS 13122(Part 2):1991 Transmitters for use in industrial process control systems: Part 2 Guidance, installation, inspection and routine testing
65 May 2011IS 13211:1991 Vapour pressure dial-type thermometers
66 Sep 2008IS 13263:1992
| IEC 60680(1980)
Methods of test for plasma equipment for electroheat installations.
67 Sep 2008IS 13673(Part 1):1993 Expression of performance of elctro chemical analyzers :Part 1 General
68 Sep 2008 1IS 13673(Part 2):1993 Expression of performance of electrochemical analyzers :Part 2 pH values
69 Sep 2008IS 13673(Part 3):1993 Expression of performance of electrochemical analyzers: Part 3 Electrolytic conductivity
70 Dec 2008IS 13673(Part 4):1998 Expression of performance of electrochemical analyzers :Part 4 Standard for measuring oxygen dissolved in water
71 Feb 2009IS 13673(Part 5):1999 Expression of performance of electrochemical analyzers :Part 5 Oxidation reduction potential or retard potential
72 Mar 2011IS 14254(Part 1):2003
/ IEC 61131-1(2003)
Programmable controller: Part 1 General information(first revision)
73 May 2011IS 14254(Part 2):2003
/ IEC 61131-2(2003)
Programmable Controllers: Part 2 Equipment Requirements and Tests (first revision)
74 Nov 2010* IS 60519(Part 1):1984
/ IEC 60519-1:1984
Safety in electro-heat installations:Part 1General requirements [Superseding IS 9080 ( Part 1)].
75 Nov 2010IS 60519(Part 3):1988
/ IEC 60519-3:1988
Safety in electroheat installations:Part 3 Particular requirements for induction and conduction heating and induction melting installations[Superseding IS 9080 (Part 3 )].
76 Nov 2010IS 60519(Part 5):1980
/ IEC 60519-5:1980
Safety in electroheat installation :Part 5 Plasma installations
77 Nov 2010* IS 60519(Part 9):1987
/ IEC 60519-9:1980
Safety in electroheat installations:Part 9 Particular requirements for high frequency dielectric heating installations
78 IS 60534(Part 2/Sec 3):1997
/ IEC 60534-2-3 :1997
Industrial - process control valves - Part 2/Sec 3 flow capacity test procedures
59
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
79 Nov 2010IS 61308:1994
/ IEC 61308:1994
High frequency dielectric heating installations -Test methods for the determination of power output.
80 IS 61508(Part 0):2000
/ (IEC 61508-0:2005)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 0: Functional Safety
81 IS 61508(Part 1):2000
/ IEC 61508-1:2000
Functional safety of electrical/electronic/progrtammable elctronic safety - related system - Part 1 General requirement
82 IS 61508(Part 2):2000
/ (IEC 61508-2:2000)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 2 requirement for electrical/Electronic/programmable electronic safety - related systems
83 IS 61508(Part 3):1998
/ (IEC 61508-3:1998)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 3 software requirements
84 IS 61508(Part 4):1998
/ (IEC 61508-4:1998)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 4 Definitions and abbreviations
85 IS 61508(Part 5):1998
/ (IEC 61508-5:1998)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 5 Examples of Methods for the determinations of safety integrity levels
86 IS 61508(Part 6):2000
/ (IEC 61508-6:2000)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 6 Guidelines on the applications
87 IS 61508(Part 7):2000
/ IEC 61508-7:2000)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 7 Over view of techniques and measures
88 IS 61511(Part 1):2003
/ (IEC 61511-1:2003)
Functional safety of electrical/electronic/programmable electronic safety - related system - Part 1 Framework, definitions,System, hardware and software requirements
89 IS 61511(Part 2):2003
/ IEC 61511-2:2003
Functional safety - safety instrumented systems for the process industry sector Part 2 Guidelines for the Applications
90 IS 61511(Part 3):2003
/ IEC 61511-3:2003
Functional safety - safety instrumented systems for the process industry sector - Part 3 Guidance for the determination of the required safety integrity levels
91 IS 62264(Part 1):2003
/ IEC 62264-1:2003
Enterprise control system Integration Part 1 Models and Terminology
92 IS 62264(Part 2):2004
/ IEC 62264-2:2004
Enterprise control system Integration Part 2 Objects Models Attributes
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 18(5614) Safety in electroheat installations: Part 2 Particular requirements for resistance [IEC 60519-2(1992)]
2 DOC.ETD 18(5615) Safety in electroheat installations: Part 4 Particular requirements for arc furnace installations [IEC 60519-4(2000)]
3 DOC.ETD 18(5616) Safety in electroheat installations: Part 11 Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids[IEC 60519-11(1997)]
60
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
4 DOC.ETD 18(5617) Test methods for crucible induction furnaces [IEC 60646(1992)]
5 DOC.ETD 18(5671) Industrial Process Control Valves - Part 1Control Valve Terminology and General Considerations [First revision of IS 10189(Part 1)] (IEC 60534-1:2005)
6 DOC.ETD 18(5675) Industrial Process Control - Safety of Analyser Houses (IEC 61285:2004)
DRAFT STANDARDS FORMULATED
1 DOC.ETD 18(5612) Safety in electroheat installations: Part 1 General requirements [first revision of IS 60519 (Part 1):1984/IEC 60519-1:1984] [IEC 60519-1(2003)]
2 DOC.ETD 18(5613) Safety in electroheat installations: Part 9 Particular requirements for high frequency dielectric heating installations [first revision of IS 60519 (Part 9):1987/IEC 60519-9:1987]
61
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 19 HIGH VOLTAGE ENGINEERING
To prepare standards for high voltage testing techniques and for different types of tests belonging there to such as high voltage ac, dc and impulse tests and high current impulse tests, definitions and basic principles of insulation coordination and insulation levels
To prepare appllication guides recommending the insulation levels in relation to possibilities of over-voltage protection devices. The work also includes formulation of standards for clearances and creepage distances
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Oct 2010IS 1876:2005
/ IEC 60052:2002
Voltage measurement by means of standard air gaps(first revision)
2 Aug 2008IS 2071(Part 1):1993
/ IEC 60060-1:1989
High voltage test- techniques: Part 1 General definitions and test requirements (second revision).
3 Mar 2011* IS 2071(Part 3):1976 Methods of high voltage testing: Part 3 Measuring devices (first revision)
4 Mar 2011 1** IS 2165(Part 1):1977
| IEC 60071-1:1976
Insulation coordination:Part 1 Phase to earth insulation coordinationprinciples and rules (second revision)
5 Mar 2011** IS 2165(Part 2):1983
| IEC 60071-3:1982
Insulation coordination: Part 2 Phase to phase insulation coordination principles and rules
6 Mar 2011 2* IS 3716:1978
| IEC 60071-2:1976
Application guide for insulation coordination (first revision)
7 Mar 2011* IS 8690:1977 Application guide for measuring devices for high voltage testing
8 Sep 2008IS 15382(Part 1):2003
/ IEC 60664-1(2002)
Insulation coordination for equipment within low voltage system: Part 1 Principles requirements and test
9 Sep 2008IS 15382(Part 2/Sec 1):2003
/ IEC 60664-2-1(1977)
Insulation coordination for equipment within low voltage system : Part 2 Appication guide, Section 1 Dimensioning procedure worksheets and dimensioning examples
10 Aug 2011IS 15382(Part 3):2006
/ IEC 60664-3(2003)
Insulation coordination for equipment within low voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution
11 Sep 2008IS 15382(Part 4):2003
/ IEC 60664-4(1997)
Insulation coordination for equipment within low voltage system: Part 4 Consideration of high frequency voltage stress
12 Feb 2011IS 15638(Part 1):2006
/ IEC 61083-1(2001)
Instruments and software used for measurement in high voltage impluse tests: Part 1 Requirements for instruments( Superseeding IS 11349)
13 Feb 2011IS 15638(Part 2):2006
/ IEC 61083-2(1996)
Instruments and software used for measurements in high voltage impulse tests: Part 2 Evaluation of software used for the determination of the parameters of impulse waveforms (Superseeding IS 11349)
14 Oct 2012IS 60060(Part 2):2010
/ IS/IEC 60060-2:2010
High voltage test techniques - Part 2 Measuring systems (IEC 60060-2:2010)
15 IS 60060(Part 3):2006 High Voltage test-techniques Part 3: Definitions and requirement for on-site testing (IEC 60060-3)
62
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 IS 60071(Part 1):2006
/ IS/IEC 60071-1:2006
Insulation Coordination - Part 1 Definitions, parinciples and rules
17 IS 60071(Part 2):1996
/ IS/IEC 60071-2:1996
Insulation Coordination - Part 2 Application guide (IEC 60071-2:1996)
18 IS 60270:2000 High voltage test techniques - Partial discharge measurements
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 19(6520) Insulation co-ordination - Part 4 : Computational guide to insulation co-ordination and modelling of electrical networks (IEC 60071-4:2004)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 19(6519) High voltage test- techniques: Part 1 General definitions and test requirements (third revision of IS 2071)).(IEC 60060-1: 2010)
2 DOC.ETD 19(6521) Insulation coordination for equipment within low voltage system: Part 1 Principles requirements and test [First Revision of IS 15382(Part 1)] (IEC 60664-1:2007)
3 DOC.ETD 19(6522) Insulation coordination for equipment within low voltage system : Part 2 Appication guide, Section 1 Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing [First Revisionof IS 15382(Part 2/Sec 1)]
4 DOC.ETD 19(6523) Insulation coordination for equipment within low voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution [First Revision of IS 15382(Part 3)]
5 DOC.ETD 19(6524) Insulation coordination for equipment within low voltage system: Part 4 Consideration of high frequency voltage stress [First Revision of IS 15382(Part 4)]
63
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 20 ELECTRICAL INSTALLATIONS
To prepare standards for safety and related matters in designing, erection and maintenance of electrical installations from the point of view of safety and good practice that would, amongst other things, promote compatibility between such standards and those concerning the equipment installed
The work includes electrical installations in buildings for different occupancies and outdoor sites of temporary or permanent nature and also installations in the ships
NOTE- The standards to be prepared will not cover codes pertaining to individual equipment
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 SP 30 : 2011 National Electrical Code (first revision)
2 Mar 2011SP 31 : 1986 Special Publication-Chart on treatment for electric-shock
3 Mar 2010* IS 732:1989 Code of practice for electrical wiring installations (third revision)
4 Mar 2010 1IS 2309:1989 Code of practice for protection of buildings andallied structures against lightning (second revision)
5 Mar 2010IS 2551:1982 Danger notice plates (first revision)
6 Mar 2011 2* IS 3043:1987 Code of practice for earthing
7 Aug 2012IS 4648:1968 Guide for electrical layout in residential buildings
8 Mar 2010IS 5216(Part 1):1982 Recommendations on safety procedures and practicesin electrical work: Part 1 General (first revision)
9 Mar 2010IS 5216(Part 2):1982 Recommendations on safety procedures and practices in electrical work: Part 2 Life saving techniques (first revision)
10 Mar 2010IS 7689:1989 Guide for the control of undesirable static electricity (first revision)
11 Mar 2011IS 7752(Part 1):1975 Guide for improvement of power factor in consumer installation: Part 1 Low and medium supply voltages
12 Mar 2011IS 8061:1976 Code of practice for design, installation andmaintenance of service lines upto and including 650 V
13 Aug 2012IS 8437(Part 1):1992
/ IEC 60479-1:1984
Guide on effects of current passing through human body: Part 1General aspects(first revision)
14 Aug 2012IS 8437(Part 2):1992
/ IEC 60479-2:1987
Guide on effects of current passing through human body : Part 2 Special aspects (first revision).
15 Aug 2012IS 8884:1978 Code of practice for the installation of electric bells and call systems
16 Mar 2010IS 8923:1978 Warning symbol for dangerous voltages
64
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
17 Mar 2011IS 8969:1978 Code of practice for installation and maintenance of impulse and electronic master and slave electric clock systems
18 Mar 2011IS 10118(Part 1):1982 Code of practice for selection, installation and maintenance of switchgear and controlgear : Part 1 General
19 Mar 2011IS 10118(Part 2):1982 Code of practice for selection, installation and maintenance of Switchgear and controlgear : Part 2 Selection
20 Mar 2011IS 10118(Part 3):1982 Code of practice for selection, installation and maintenance of switchgear and controlgear :Part 3 Installation
21 Mar 2011IS 10118(Part 4):1982 Code of practice for selection, installation and maintenance of switchgear and controlgear :Part 4 Maintenance
22 Sep 2012IS 10242(Part 1/Sec 1):1997
| IEC 60092-101:1980
Electrical installations in ships: Part 1 General, Section 1 Definitions and general requirements (first revision)
23 Mar 2009* IS 10242(Part 2/Sec 1):1982
| IEC 60092-201:1980
Electrical installations in ships: Part 2 System design, Section 1 General
24 Sep 2012IS 10242(Part 2/Sec 2):1983
| IEC 60092-202:1980
Electrical installations in ships: Part 2 System design, Section 2 Protection
25 Mar 2009IS 10242(Part 2/Sec 4):1993
| IEC 60092-204:1987
Electrical installationss in ships: Part 2 System design, Sec 4 Electric and electrohydraulic steering gear
26 Sep 2012IS 10242(Part 3/Sec 1):1983
| IEC 60092-301:1980
Electrical installations in ships: Part 3 Equipment, Section 1 Generators and motors
27 Sep 2012IS 10242(Part 3/Sec 2):1984
| IEC 60092-302:1980
Electrical installations in ships: Part 3 Equipment, Section 2 Switchgear and controlgear assemblies
28 Sep 2012IS 10242(Part 3/Sec 3):1984
| IEC 60092-303:1980
Electrical installations in ships: Part 3 Equipment, Section 3 Transformers for power and lighting
29 Sep 2012IS 10242(Part 3/Sec 4):1987
| IEC 60092-304:1980
Electrical installations in ships: Part 3 Equipment, Section 4 Semi-conductor convertors
30 Sep 2012IS 10242(Part 3/Sec 5):1990
| IEC 60092-305:1980
Electrical installations inn ships: Part 3 Equipment, Section 5 Accumulators (storage) batteries
31 Sep 2012IS 10242(Part 3/Sec 6):1986
| IEC 60092-306:1980
Electrical installations in ships: Part 3 Equipment, Section 6 Luminaires and accessories
32 Sep 2012IS 10242(Part 3/Sec 7):1990
| IEC 60092-307:1980
Electrical installations in ships:Part 3 Equipment, Section 7 Heating and cooking appliances
33 Mar 2009IS 10242(Part 3/Sec 10):1992
| IEC 60092-350
Electrical installations in ships: Part 3 Equipment, Section 10 General construction and test requirements for low voltage shipboard power cables
34 Sep 2012IS 10242(Part 3/Sec 11):1986
| IEC 60092-35:1983
Electrical installations in ships: Part 3 Equipment, Section 11 Insulating materials for shipboard power cables
35 Sep 2012IS 10242(Part 3/Sec 12):1986
| IEC 60092-352:1979
Electrical installations in ships: Part 3 Equipment, Section 12 Choice and installation of cables for low voltage systems
36 Sep 2012IS 10242(Part 3/Sec 13):1992
| IEC 60092-353:1988
Electrical installations in ships: Part 3 Equipment, Section 13 Single and multicore cables with extruded solid insulation for rated voltage 0.6/1 kV
65
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
37 Sep 2012IS 10242(Part 3/Sec 19):1990
| IEC 60092-359:1987
Electrical installations in ships: Part 3 Equipment, Section 19 Sheathing materials for telecommunication and power shipboard cables
38 Sep 2012IS 10242(Part 3/Sec 23):1987
| IEC 60092-373:1977
Electrical installations in ships: Part 3 Equipment, Section 23 Shipboard telecommunication cables and radio frequency cables: Shipboard flexible coaxial cables
39 Sep 2012IS 10242(Part 3/Sec 24):1987
| IEC 60092-374:1977
Electrical installations in ships: Part 3 Equipment, Section 24 Shipboard telecommunication cables and radiofrequency cables: Telephone cables for non-essential communication services
40 Sep 2012IS 10242(Part 3/Sec 25):1987
| IEC 60092-375:1977
Electrical installations in ships: Part 3 Equipment, Section 25 Shipboard telecommunication cables and radio frequency cables: General instrumentation, control and communication cables
41 Sep 2012IS 10242(Part 3/Sec 26):1987
| IEC 60092-376:1983
Electrical installations in ships: Part 3 Equipment, Section 26 Shipboard telecommunication cables: Shipboard multicore cables for control circuits
42 Sep 2012IS 10242(Part 4):1992
| IEC 60092-401:1980
Electrical installations in ships: Part 4 Installation and test of completed installation
43 Mar 2009IS 10242(Part 5/Sec 1):1993
| IEC 60092-501:1984
Electrical installations in ships: Part 5 Special features, Sec 1 Electric propulsion plant
44 Sep 2012* IS 10242(Part 5/Sec 2):1997
| IEC 60092-502:1999
Electrical installations in ships: Part 5 Special features, Section 2 Tankers
45 Mar 2009IS 10242(Part 5/Sec 3):1993
| IEC 60092-503:1975
Electrical installations in ships: Part 5 Special features Sec 3 ac supply system with voltage in the range above 1 kV up to and including 11 kV
46 Dec 2008IS 10242(Part 5/Sec 4):1998
| IEC 60092-504:2001
Electrical installations in ships : Part 5 Special features, Section 4 Control and instruments
47 Aug 2012IS 13234:1991
/ IEC 60909:1988
Guide for short circuit current calculations ln three-phase ac systems(superseding IS 5728)
48 Aug 2012IS 13235:1991
/ IEC 60865:1986
Calculation of the effects of short-circuit currents Superseding IS 5728:1970)
49 Sep 2012IS 14479:1997
| IEC 60 533:1999
Electromagnetic compatibility of electrical and electronic installation in ships
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 20(6443) Effects of current on human beings and livestock : Part 1 General aspects
2 DOC.ETD 20(6444) Effects of current on human beings and livestock : Part 2 Special aspects
3 DOC.ETD 20(6445) Effects of current on human beings and livestock : Part 3 Effects of currents passing strokes on human beings and livestocks
4 DOC.ETD 20(6446) Effects of current on human beings and livestock : Part 4 Effects of lightning strokes on human beings and livestocks
5 DOC.ETD 20(6451) Effects of current on human beings and livestock : Part 5 Touch voltage threshold values for physilogycal effects
66
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 20(6447) Protection against lightning : Part 1General principles (IEC 62305-1)
2 DOC.ETD 20(6448) Protection against lightning : Part 2 Risk Management (IEC 62305-2)
3 DOC.ETD 20(6449) Protection against lightning : Part 3 Physical damage to structures and life hazard (IEC 62305-3)
4 DOC.ETD 20(6450) Protection against lightning : Part 4 Electrical and electronic systems within structures (IEC 62305-4)
5 DOC.ETD 20(6620) Short-circuit current in three-phase a.c. sustems, Part 0 Calculation of currents
6 DOC.ETD 20(6621) Short-circuit currents in three-phase a.c. systems – Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
7 2001DOC.ETD 20(6622) Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
8 DOC.ETD 20(6623) Short-circuit currents in three-phase a.c. systems – Part 3: Current during two separate simultaneous line-to-earthshort circuits and partial short-circuit current flowing through earth
9 DOC.ETD 20(6624) Short-circuit currents in three-phase a.c. systems – Part 4: Examples for the calculation of short-circuit currents
DRAFT STANDARDS FORMULATED
1 DOC.ETD 20(5838) Revision of IS 732 Electrical Wiring Installations
67
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 21 ELECTRIC WELDING EQUIPMENT
To prepare standards on the construction, performance, testing and safety requirements for electric welding equipment and accessories for both arc and resistance type
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Sep 2012IS 1851:1997
| ISO 700:1982
Single Operator type arc weldingtransformers (third revision)
2 Sep 2012IS 2635:1997 dc electric welding generators (third revision)
3 Jun 2010IS 2641:1989 Electrical welding accessories (first revision)
4 Mar 2009IS 4559:1993
| ISO 700:1982
Single operator rectifier type dc arcwelding power source (second revision)
5 Jun 2010IS 4804(Part 1):1968 Resistance welding equipment : Part 1 Single phase transformers
6 Jun 2010 1IS 4804(Part 2):1968 Resistance welding equipment: Part 2 Single phase rocker-arm spot welding machines
7 Jun 2010 1IS 4804(Part 3):1969 Resistance welding equipment:Part 3 Single phase spot and projection welding machines
8 Jun 2010IS 4804(Part 4):1973 Resistance welding equipment: Part 4 Single phase stationary, press typeroll-spot and seam welding machines
9 Mar 2009IS 6008:1989
| IEC 700:1982
Single operator ac/dc arc weldingpower source (first revision)
10 Mar 2009IS 7931(Part 1):1975 Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG processes) : Part 1 dc welding generator power source
11 Mar 2009 1IS 7931(Part 2):1975 Automatic and semi-automatic welding equipmentwith self-adjusting arcs (MIG/MAG Processes): Part 2 Transformer rectifier power source
12 Mar 2009 1IS 7931(Part 3):1975 Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG Processes): Part 3 Welding gun and ancillary equipment
13 Mar 2009IS 8804:1993
| IEC 501:1975
Plugs, sockets and terminal arrangementsand welding cable connectors for manual welding equipment (first revision)
14 Mar 2009IS 9604:1994 Tungsten-inert gas (TIG) welding equipment
15 Sep 2012IS 13339:1992 Multi-operator type arc welding transformers
68
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 22 ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES
To prepare guidelines and requirements for electrical apparatus for use where there is a hazard due to the possible presence of ignitable gas, vapour liquid particles or dust in the atmosphere.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Oct 2011* IS 4051:1967 Code of practice for installation and maintenance of electrical equipment in mines
2 Feb 2009IS 5571:2009
| IEC 60079-14(2002)
Guide for selection and installation of electrical equipment in hazardous areas (other than mines(third revision)
3 Jan 2009IS 5572:2009
| IEC 60079-10(2002)
Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation (third revision of IS 5572)
4 Oct 2011 1IS 5679:1986 Miners' cap lamp assemblies (incorporating lead acid type batteries) (first revision)
5 Oct 2011* IS 9559:1980 Guide for selection of electrical and electronic equipment for coal mines
6 Oct 2011IS 9836:1981 Exploders
7 Oct 2011* IS 11064:1984
| IEC 60079-13(1982)
Guide for construction and use of rooms or buildings protected by pressurization for installation of electrical apparatus for explosive gas atmospheres
8 Apr 2010* IS 14774(Part 1):2000
| IEC 62086-1
Resistance trace heating in potentially explosive atmospheres: Part 1 General and testing requirements
9 Apr 2010IS 14774(Part 2):2000
| IEC 62086-2
Resistance trace heating in potentially explosive atmospheres: Part 2 Informative application guide for design, installation and maintenance
10 Sep 2012IS 15142:2002 Guide to the use of electrical apparatus for potentially explosive atmospheres in the presence of combustible dusts
11 May 2012IS 60079:2007
/ IEC 60079-0(2007)
Explosive Atmospheres. Part 0: Equipment - General Requirements (First Revision)
12 Dec 2012IS 60079(Part 1):2007
/ IEC 60079-1(2007)
Explosive atmospheres : Part 1 Equipment protection by flameproof enclosures "d" (superseding IS 2148:2004 )
13 Jul 2009IS 60079(Part 2):2007
/ IEC 60079-2 (2007)
Explosive atmospheres: Part 2 Equipment protection by pressurized enclosure "p" (superseding IS 7389:2004)
14 2001IS 60079(Part 26):2006 Explosive Atmospheres Part 26 Equipment With Equipment Protection Level EPL "Ga"
15 Jul 2009IS 60079(Part 5):2007
/ IEC 60079-5 (2007)
Explosive atmospheres: Part 5 Equipment protection by powder filling "q" (superseding IS 7724:2004)
16 Mar 2011IS 60079(Part 6):2007 Explosive atmospheres: Part 6 Equipment protection by oil immersion "o" (superseding IS 7693:2004)
69
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
17 Sep 2008IS 60079(Part 7):2006
/ IEC 60079-7 (2006)
Explosive atmospheres: Part 7 Equipment protection by increased safety "e" (superseding IS 6381:2004)
18 Sep 2008IS 60079(Part 11):2006
/ IEC 60079-11(2006)
Explosive atmospheres: Part 11 Equipment protection by intrinsic safety "i" (superseding IS 5780:2002)
19 Oct 2012* IS 60079(Part 15):2005
/ IEC 60079-15(2005)
Electrical apparatus for explosive gas atmospheres : Part 15 Construction, test and marking of type of protection "n" electrical apparatus (supersedingIS 8289)
20 Apr 2008IS 60079(Part 16):1990
/ IEC 60079-16 (1990)
Electrical apparatus for explosive gas atmospheres: Part 16 Artificial ventilation for the protection of analyzer(s) houses
21 Sep 2008IS 60079(Part 17):2007
/ IEC 60079-17 (2007)
Explosive atmospheres : Part 17 Electrical installations inspection and maintenance
22 Oct 2012IS 60079(Part 18):2009
/ IEC 60079-18:2009
Explosive Atmospheres Part 18 Equipment Protection By Encapsulation "m" (First Revision)
23 Jul 2008* IS 60079(Part 19):2006
/ IEC 60079-19(2006)
Explosive atmospheres : Part 19 Repair, overhaul and reclamation
24 Nov 2012IS 60079(Part 20/Sec 1):2000
/ IS/IEC 60079-20-1
Explosive Atmospheres Part 20 material Characteristics For Gas and Vapour Classification Section 1 Test Methods and Data(Superseding IS 7820, IS 9570, IS 9735, IS/IEC 60079-20)
25 Nov 2010* IS 60079(Part 25):2003
/ IEC 60079-25(2003)
Electrical apparatus for explosive gas atmospheres : Part 25 Intrinsically safe systems
26 Nov 2012IS 60079(Part 28):2000
/ IS/IEC 60079-28
Explosive Atmospheres Part 28 Protection of Equipment And Transmission Systems Using Optical Radiation
27 Mar 2012IS 60079(Part 29/Sec 1):2007 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
28 Dec 2011IS 60079(Part 29/Sec 2):2007 Explosive atmospheres - Part 29-2: Gas detectors - selection, installations, use and maintenance of detectors for flammable gases and oxygen
29 Nov 2012IS 60079(Part 30/Sec 1):2007
/ IS/IEC 60079-30-1
Explosive Atmospheres Part 30 Electrical Resistance Trace Heating Section 1 General And Testing Requirements (Superseding IS 14774 (Part 1)
30 Nov 2012IS 60079(Part 30/Sec 2):2007
/ IS/IEC 60079-30-2
Explosives Atmospheres Part 30 Electrical Resistance Trace Heating Section 2 Application Guide for Design , Installation And Maintenance (Superseding IS 14774 (Part 2)
31 Nov 2012IS 60079(Part 31):2008
/ IS/IEC 60079-31
Explosives Atmospheres Part 31 Equipment Dust Ignition Protection By Enclosures"T"
32 May 2009IS 61241(Part 0):2004 Electrical apparatus for use in the presence of combustible dust: Part 0 General requirements (Superseding IS 14154(Part 1) : 1996
33 Apr 2009IS 61241(Part 1):2004 Electrical apparatus for use in the presence of combustible dust: Part 1: Protection by enclosures “tD”
34 Oct 2009IS 61241(Part 2/Sec 1):2000
/ IEC 61241-2-1(1994)
Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 1 Method for determining the minimum ignition temperatures of dust (Superseding IS 12315-2:1998)
70
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
35 Apr 2009IS 61241(Part 2/Sec 3):1994
/ IEC 61241-2-3(1994)
Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 3 Method for determining minimum ignition energy of dust/air mixtures
36 Dec 2009IS 61241(Part 4):2001
/ IEC 61241-4 (2001)
Electrical apparatus for use in the presence of combustible dust: Part 4 Type of protection “pD”
37 Apr 2009IS 61241(Part 10):2004
/ IEC 61241-10 (2004)
Electrical apparatus for use in the presence of combustible dust: Part 10 : Classification of areas where combustible dusts are or may be present
38 May 2009IS 61241(Part 11):2005 Electrical apparatus for use in the presence of combustible dust: Part 11 Protection by intrinsic safety “iD”
39 May 2009IS 61241(Part 14):2004 Electrical apparatus for use in the presence of combustible dust: Part 14 Selection and installation (Superseding IS 14154(Part 2) : 1997 & IS 13408-1 : 1992)
40 May 2009IS 61241(Part 18):2004 Electrical Apparatus for Use in the Presence of Combustible Dust: Part 18 Protection by Encapsulation “mD”
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 22(6264)
/ IS/IEC 60079-27
Explosive Atmospheres Part 27 Fieldbus Intrisically Safe Concept (FISCO)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 22(6400)
/ IEC 60079-10- (2009)
Explosive Atmospheres – Part 10-2: Classification of areas –Combustible dust atmospheres
2 DOC.ETD 22(6401)
/ IEC 60079-13 (2010)
Explosive Atmospheres - Part 13: Equipment protection by pressurized room "p"
3 DOC.ETD 22(6402)
/ IEC 60079-15 (2010)
Explosive Atmospheres - Part 15: Equipment protection by type of protection "n"
4 DOC.ETD 22(6403)
/ IEC 60079-19 (2010)
Explosive Atmospheres - Part 19: Equipment repair, overhaul and reclamation
5 DOC.ETD 22(6404)
/ IEC 60079-25 (2010)
Explosive Atmospheres - Part 25: Intrinsically safe electrical systems
6 DOC.ETD 22(6405)
/ IEC 60079-29-4(2009)
Explosive Atmospheres Part 29-4: Gas detectors -Performance requirements of open path detectors for flammable gases
7 DOC.ETD 22(6406)
/ IEC 61241-2-2(1994)
Electrical apparatus for use in the presence of combustible dust - Part 2 : Test methods – Section 2: Method for determining the electrical resistivity of dust in layers
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 22(6588)
/ IEC 60079-35-1 (2011
Explosive Atmospheres –Part 35-1 : Caplights for use in mines susceptible to firedamp – General requirements – Construction and testing in relation to the risk of explosion
2 DOC.ETD 22(6589)
/ IEC 60079-35-2 (2011
Explosive Atmospheres – Part 35-2 : Caplights for use in mines susceptible to firedamp – Performance and other safety-related matters
3 DOC.ETD 22(6590)
/ IEC 60079-0 : 2011
Explosive Atmospheres –Part 0: General requirements (Second revision)
71
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
4 DOC.ETD 22(6591)
/ IEC 60079-11 (2012)
Explosive Atmospheres – Part 11: protection by intrinsic safety “i” (First revision)
DRAFT STANDARDS FORMULATED
1 DOC.ETD 22(6191) Code of practice for electrical and electronic equipments for belowground coal mines
72
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 23 ELECTRIC LAMPS AND THEIR AUXILIARIES
To prepare standards for all types of electric lamps, caps and their auxiliaries (luminaires are excluded)
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2009 4IS 418:2004
| IEC 60064(1993)
Tungsten filament lamps for domestic and similar general lighting purposes (fourth revision)
2 Mar 2010 3IS 897:1982 Tungsten filament electric lamps for railway rolling stock (second revision)
3 Jul 2011 5IS 1534(Part 1):1977
| IEC 82(1973)
Ballasts for fluorescent lamps:Part 1 For switch start circuits (second revision)
4 Jul 2011 1IS 1569:1976
| IEC 566
Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp circuits ( first revision)
5 Oct 2012 1IS 1901:1978 Visual indicator lamps (first revision)
6 Jun 2010IS 2215:2006
| IEC 60155 (1993)
Starters for fluorescent lamps (third revision)
7 Dec 2010 1IS 2261:1975 Lamps for flashlights (first revision)
8 Jul 2011IS 2262:1963 Transformers for high voltage luminous discharge tubes
9 Oct 2012IS 2407:1963 Photometric integrators
10 Dec 2010 8IS 2418(Part 1):1977
| IEC 81(1974)
Tubular fluorescent lamps for general lighting service: Part 1 Requirements and tests (first revision)
11 Jul 2011 3IS 2418(Part 2):1977
| IEC 81(1974)
Tubular fluorescent lamps for general lighting service : Part 2 Standard lamp data sheets (first revision)
12 Jul 2011 1IS 2418(Part 3):1977
| IEC 61-1(1969)
Tubular fluorescent lamps for general lighting service : Part 3 Dimensions of G-5and G-13 bi-pin caps (first revision)
13 Oct 2012IS 2418(Part 4):1977
| IEC 61-3(1969)
Tubular fluorescent lamps for general lighting service: Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)
14 Oct 2012IS 2592:1980 Lamps for lighting on board ships (first revision)
15 Sep 2009IS 2596:2004 Bulbs (lamps) for miners cap lamps (second revision)
16 Jul 2011 1IS 6616:1982
| IEC 262(1969)
Ballasts for high pressure mercury vapour lamps (first revision)
17 Jul 2011 2IS 6701:1985
| IEC 61-1(1969)
Tungsten filament miscellaneous electric lamps (first revision)
18 Oct 2012IS 7013:1981 Radio dial lamps (first revision)
73
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
19 Jul 2011IS 7027:1984
| IEC 458 (1982)
Transistorized ballasts for fluorescent lamps (first revision)
20 Jul 2011IS 8685:1977
| IEC 60434 (1973)
Aircraft lamps
21 Jul 2011 1IS 8901:1978 Lamps for aerodrome lighting fittings
22 Oct 2012IS 8913:1978
| IEC 360(1971)
Methods of measurement of lamp cap temperature rise
23 Dec 2010 4IS 9206:1979
| IEC 60061-1(1969)
Dimensions of caps for tungsten filament general service electric lamps
24 Oct 2012IS 9589:1980 Electric lamps for railway signalling
25 Oct 2012 4IS 9900(Part 1):1981
| IEC 188(1974)
High pressure mercury vapour lamps:Part 1 Requirements and test (Superseding IS:2183 and IS:7023)
26 Oct 2012 1IS 9900(Part 2):1981
| IEC 188(1974)
High pressure mercury vapour lamps: Part 2 Standard lamp data sheets (superseding IS: 2183 and IS: 7023)
27 Oct 2012IS 9900(Part 3):1981
| IEC 188(1974)
High pressure mercury vapour lamps :Part 3 Dimensions of lamp caps(superseding IS:2183 and IS:7023)
28 Oct 2012IS 9900(Part 4):1981
| IEC 61-3(1969)
High pressure mercury vapour lamps :Part 4 Go and no-go gauges of lamp caps(superseding IS:2183 and IS:7023)
29 Oct 2012 4IS 9974(Part 1):1981
| IEC 662(1980)
High pressure sodium vapour lamps :Part 1 General requirements and tests
30 Oct 2012 2IS 9974(Part 2):1981
| IEC 662(1980)
High pressure sodium vapour lamps :Part 2 Standard lamp data sheets
31 Oct 2012IS 11980:1987 Lamp (bulb) cycle dynamo
32 Jun 2008 1IS 12449(Part 1):1988
| IEC 60926 (1995)
Starting devices (other than glow starters):Part 1 General and safety requirements
33 Jun 2008 1IS 12449(Part 2):1988
| IEC 60927 (1996)
Starting devices (other than glow starters):Part 2 Performance requirements
34 Mar 2011 1IS 12897:2001 Filaments for general service lamps-Guide (first revision)
35 Jul 2011IS 12948:1990
| IEC 60357(1982)
Tungsten halogen lamps (non-vehicle)
36 Dec 2010 1IS 13021(Part 1):1991
| IEC 60928(1990)
AC supplied electronic ballasts for tubular florescent lamps: Part 1 General and safety requirements
37 Dec 2010 2IS 13021(Part 2):1991
| IEC 60929(1990)
AC supplied electronic ballasts for tubular florescent lamps: Part 2 Performance requirements
38 Dec 2010 1IS 14897:2000
| IEC 60887(1988)
Glass bulb designation system for lamps-Guide
39 Jan 2012 4IS 15111(Part 1):2002
| IEC 60968(1988)
Self ballasted lamps for general lighting services :Part 1 Safety requirements
40 Feb 2012 9IS 15111(Part 2):2002
| IEC 60969(1988)
Self ballasted lamps for general lighting services :Part 2 Performance requirements
74
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
41 Aug 2009 3IS 15518(Part 1):2004
| IEC 60432-1 (1999)
Safety requirements for incandescent lamps : Part 1 Tungsten filament lamps for domestic and similar general lighting purposes
42 Nov 2011IS 15687(Part 1):2006
| IEC 61199 (1999)
Single-capped fluorescent lamps: Part 1 Safety requirements
43 Dec 2009IS 15882:2009 Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements[Superseding IS 6616 :1982]
44 May 2011IS 15885(Part 1):2011 Safety of lamp controlgear: Part 1 General requirements
45 Feb 2011IS 15885(Part 2/Sec 1):2011
| IEC 61347-2-1 (2000)
Safety of lamp controlgear: Part 2 Particular requirements, Sec 1 Starting devices (other than glow starters
46 Jan 2011IS 15885(Part 2/Sec 3):2011
| IEC 61347-2-3 (2000)
Safety of lamp controlgear: Part 2 Particular requirements, Sec 3 ac supplied electronic ballasts for fluorescent lamps
47 Jan 2011IS 15885(Part 2/Sec 8):2011
| IEC 61347-2-8 (2000)
Safety of lamp controlgear: Part 2 Particular requirements, Sec 8 Ballasts for fluorescent lamps
48 Jan 2011IS 15885(Part 2/Sec 9):2011
| IEC 61347-2-9 (2000)
Safety of lamp controlgear: Part 2 Particular requirements, Sec 9 Ballasts for discharge lamps (excluding fluorescent lamps)
49 Feb 2012IS 15885(Part 2/Sec 13):2012
/ IEC 61347-2-13(2006)
Lamp Control gear Part 2 Particular Requirements. Section 13 D.C. or A.C. Supplied Electronic Controlgear For Led Modules
50 May 2011IS 15906:2010 Measurement of mercury level in fluorescent lamps
51 2001IS 15967(Part 2):2013 Capacitor for tubular fluorescent lamps: Part 2 Performance requirements
52 IS 15968:2013 Ballasts for tubular fluorescent lamps - Performance requirements
53 Feb 2012IS 16101:2012 General Lighting - LEDs and LED Modules -Terms and Definitions
54 Feb 2012IS 16102(Part 1):2012 Self Ballasted LED-Lamps for General Lighting Services Part 1 Safety Requirements
55 Feb 2012IS 16102(Part 2):2012 Self Ballasted LED-Lamps for General Lighting Services Part 2 Performance Requirements
56 Feb 2012IS 16103(Part 1):2012 Led Modules for General Lighting- Safety Specification
57 Mar 2012IS 16103(Part 2):2012 Led Modules for General Lighting Part 2 Performance Requirements
58 Feb 2012IS 16104:2012 DC or AC Supplied Electronic Control Gear for LED Modules - Performance Requirements
59 Feb 2012IS 16105:2012 Method of Measurement of Lumen Maintenance of Solid State Light (LED) Sources
60 Feb 2012IS 16106:2012 Method Of Electrical And Photometric Measurements Of Solid- State Lighting (Led) Products
61 Feb 2012IS 16108:2012
/ IEC 62471 (2006)
Photobiological Safety of Lamp and Lamp Systems
75
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 23(5880) Capacitor for tubular fluorescent lamps: Part 1 Safety requirements
2 DOC.ETD 23(5965) Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
3 DOC.ETD 23(6579) ac supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 23(6062) Double-capped fluorescent lamps for general lighting service - Specification: Part 2 Performance requirements [second revision of IS 2418 (Part 2)]
2 DOC.ETD 23(6500)
/ IEC 61167 (2011)
Metal halide lamps - Performance Specification
3 DOC.ETD 23(6511)
/ IEC 62554 (2011)
Sample Preparation For Measurement of Mercury Level In Fluorescent Lamps
DRAFT STANDARDS FORMULATED
1 DOC.ETD 23(6528) Double-Capped Led Lamps For General Lighting Services – Part 1 Safety Requirements
2 DOC.ETD 23(6564) Single Capped Fluorescent Lamps Part 2 Performance Requirements
76
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 24 ILLUMINATION ENGINEERING AND LUMINAIRES
To prepare codes of practice for interior and exterior lighting and standards for luminaires (including luminaires for use in hazardous area, aviation lighting, emergency lighting etc.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 SP 72 : 2010 National Lighting Code
2 Mar 2013IS 1944(Part 5):1981 Code of practice for lighting of public thoroughfare: Part 5 Lighting for grade separated junctions, bridges and elevated roads (Group D)
3 Mar 2013IS 1944(Part 6):1981 Code of practice for lighting of public thoroughfare:Part 6 Lighting for towns and city centres andareas of civic importance (Group E)
4 Mar 2013IS 1944(Part 7):1981 Code of practice for lighting of public thoroughfare: Part 7 Lighting for roadswith special requirements (Group F)
5 Mar 2013 2IS 1944(Part 1 & 2):1970 Code of practice for lighting of public thoroughfare:Parts 1 and 2 For main and secondary roads (Group A and B) (first revision) (Parts 1 and 2 in one volume)
6 May 2010IS 2672:1966 Code of practice for library lighting
7 May 2010IS 3528:1966 Waterproof electric lighting fittings
8 May 2010IS 3553:1966 Watertight electric lighting fittings
9 Mar 2008IS 3646(Part 1):1992 Code of practice for interior illumination:Part 1 General requirements and recommendationsfor working interiors (first revision)
10 Mar 2013IS 3646(Part 2):1966 Code of practice for interior illumination: Part 2 Schedule of illumination and glare index
11 Mar 2013IS 3646(Part 3):1968 Code of practice for interior illumination: Part 3 Calculation of coefficients of utilization by the BZ method
12 May 2010IS 4347:1967 Code of practice for hospital lighting
13 May 2010 1IS 5077:1969 Decorative lighting outfits
14 May 2010IS 6665:1972 Code of pratice for industrial lighting
15 Mar 2013IS 7537:1974 Road traffic signals
16 Mar 2008IS 7569:1987 Cast acrylic sheets for use in luminaires (first revision)
17 Mar 2013IS 7785(Part 1):1975 Elevated type aerodrome lighting fittings: Part 1 General requirements
77
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 Mar 2013IS 7785(Part 2):1976 Elevated type aerodrome lighting fittings:Part 2 Fixed focus high intensity bi-directionalrunway edge lighting fittings
19 Mar 2013IS 7785(Part 3):1976 Elevated type aerodrome lighting fittings:Part 3 Low intensity runway edge lighting fittings
20 Mar 2013IS 7785(Part 4/Sec 1):1981 Elevated type aerodrome lighting fittings:Part 4 Angle of approach lights, Section 1 Visual approach slope indicators
21 Mar 2013IS 7785(Part 5/Sec 1):1981 Elevated type aerodrome lighting fittings:Part 5 Approach lighting fittings, Section 1 High intensity elevated approach lighting fittings
22 Mar 2013IS 7785(Part 6/Sec 1):1981 Elevated type aerodrome lighting fittings:Part 6 Taxiway lights, Section 1 Low intensity omni-directional elevated taxiway lighting fittings
23 Mar 2013IS 8030:1976
| IEC 162(1972)
Luminaires for hospitals
24 Mar 2008IS 9583:1981
| IEC 598-2-22(1980)
Emergency lighting units
25 May 2010* IS 10322(Part 1):1982
| IEC 598-1(1979)
Luminaires: Part 1 General requirements
26 May 2010IS 10322(Part 2):1982
| IEC 598-1(1979)
Luminaires: Part 2 Constructional requirements
27 May 2010IS 10322(Part 3):1984 Luminaires:Part 3 Screw and screwless terminations(superseding IS:6585)
28 May 2010 1IS 10322(Part 4):1984
| IEC 598-1(1979)
Luminaires: Part 4 Methods of tests
29 Mar 2012IS 10322(Part 5/Sec 1):2012
| IEC 60598-2-1(1979)
Luminaires: Part 5 Particular requirements, Sec 1 Fixed general purpose luminaires (First revision)
30 Mar 2012IS 10322(Part 5/Sec 2):2012
| IEC 60598-2-2 (1979)
Luminaires: Part 5 Particular requirements, Sec 2 Recessed luminaires (First revision)
31 Mar 2012IS 10322(Part 5/Sec 3):2012
| IEC 60598-2-3 (1979)
Luminaires: Part 5 Particular requirements, Sec 3 Luminaires for road and street lighting (First revision)
32 May 2010 1IS 10322(Part 5/Sec 4):1987
| IEC 60598-2-4(1979)
Luminaires: Part 5 Particular requirements,Section 4 Portable general purpose luminaires
33 May 2010 1IS 10322(Part 5/Sec 5):1987
| IEC 60598-2-5
Luminaires: Part 5 Particular requirements, Section 5 Flood lights (superseding IS:1947)
34 May 2010IS 10894:1984 Code of practice for lighting of educational institutions
35 May 2010IS 10947:1984 Code of practice for lighting for ports and harbours
36 May 2010IS 11071(Part 1):1984 Inset type aerodrome lighting fittings: Part 1 General requirements and tests
37 May 2010IS 11071(Part 2):1984 Inset type aerodrome lighting fittings:Part 2 Runway centre line lighting fittings
38 May 2010IS 11071(Part 3):1984 Inset type aerodrome lighting fittings:Part 3 Approach lighting fittings
78
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
39 May 2010IS 11071(Part 4):1984 Inset type aerodrome lighting fittings:Part 4 Touchdown zone lighting fittings
40 May 2010IS 11116:1984 Code of practice for lighting for airport aprons
41 Mar 2013IS 11472(Part 1):1985 Artificial day light for the assessment of colours:Part 1 Illuminant for colour matching and colour appraisal
42 Mar 2013IS 11472(Part 2):1985 Artificial day light for the assessment of colours:Part 2 Viewing conditions for graphic arts industry
43 Mar 2013IS 12290(Part 0):1987 Isolating transformers for airport lighting
44 Mar 2013IS 12291:1987 Constant current regulators for airport systems
45 Mar 2013IS 12309(Part 1):1988 Code of practice for installation and maintenance of aerodrome lighting fittings: Part 1 Installation
46 Mar 2013IS 12309(Part 2):1988 Code of practice for installation and maintenance of aerodrome lighting fittings: Part 2 Maintenance
47 May 2010IS 13383(Part 1):1992 Methods of photometry of luminaires:Part 1 For use in interior lighting
48 Oct 2010 1IS 13383(Part 2):1992 Methods of photometry of luminaires:Part 2 For road and street lighting
49 May 2010IS 13383(Part 3):1992 Methods of photometry of luminaires: Part 3 For flood lighting
50 Mar 2012IS 16107(Part 1):2012 Luminaires Performance Part 1 - General Requirements
51 Mar 2012IS 16107(Part 2/Sec 1):2012 Luminaires Performance Part 2 Particular Requirements - Section 1 : LED Luminaire
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 24(5797)
/ IEC 60598-1(2003-10)
Luminaires: Part 1 General requirements and tests [first revision of IS 10322 (Part 1 to Part 4)]
2 DOC.ETD 24(6120) Luminaires: Part 5 Particular requirements, Sec 4 Portable General Purpose [first revision of IS 10322 (Part 5/Sec 4)]
3 DOC.ETD 24(6121) Luminaires: Part 5 Particular requirements, Sec 5 Flood lighting [first revision of IS 10322 (Part 5/Sec 5)]
4 DOC.ETD 24(6122) Luminaires: Part 5 Particular requirements, Sec 6 Hand lamps
5 DOC.ETD 24(6123) Luminaires: Part 5 Particular requirements, Sec 7 Lighting chains
6 DOC.ETD 24(6124) Luminaires: Part 5 Particular requirements, Sec 8 Emergency lighting
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 24(6305) Led Luminairies for General Lighting purposes Part 1 : Safety Requirements
79
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS FORMULATED
1 DOC.ETD 24(6487) Led-Luminaires Part 3 Particular EquirementsSection 3 Street Lighting
80
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 25 LIFTS AND ESCALATORS
To prepare standards and codes of practice for electrically operated lifts and escalators, including equipment and components
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Feb 2012IS 4591:1968 Code of practice for installation and maintenance of escalators
2 Feb 2012IS 8216:1976 Guide for inspection of lift wire ropes
3 Oct 2010IS 14665(Part 1):2000 Electric traction lifts :Part 1 Outline dimensions (superseeding IS 3534:1976)
4 Oct 2010 3IS 14665(Part 2/Sec 1 & 2):2000 Electric traction lifts :Part 2 Code of prtactice for installation , operation and maintenance, Section 1 Passengers and goods lifts (Superseeding IS 1860:1980) ,Section 2 Service lifts (superseeding IS 6620:1972)
5 May 2010 2IS 14665(Part 3/Sec 1 & 2):2000 Electric traction lifts :Part 3 Safety rules , Section 1 Passenger and goods lifts (superseeding IS 4666:1980), Section 2 Service lifts (superseeding IS 6383:1971)
6 Jun 2011 4IS 14665(Part 4/Sec 1-9):2001 Electric traction lifts :Part 4 Components, Section 1 Lift buffers (superseding IS 9803:1981), Section 2 Lift guide rails and guide shoes (superseding IS 10191:1982 and IS 11615:1986,Section 3 Lift car frame, car counterweight and suspension (superseding IS 11706:1986), Section 4 Lift safety gears and governors (superseding IS 9878:1981), Section 5 Lift retiring cam (superseding IS 10448:1983), Section 6 Lift doors, locking devices and contacts (superseding IS 7759:1975 and 11633:1986), Section 7 Lift machines and brakes (superseding IS 10913:1984), Section 8 Lift wire ropes, Section 9 Controller and operating devices
7 Mar 2009IS 14665(Part 5):1999 Electric traction lifts:Part 5 Inspection manual
8 Mar 2009IS 14671:1999 Code of practice for instalation and maintenance of hydraulic lifts
9 Nov 2012 1IS 15259:2002 Installation and maintenance of home lifts - Code of practice
10 Mar 2013IS 15330:2003 Code of practice for installation and maintenance of lifts for handicapped persons
11 1IS 15785:2007 Code of practice for installation and maintenance of lifts without conventional machine rooms
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 25(6598) Installation And Maintenance of Lifts For Handicapped Persons Code of Practice (First Revision of IS 15330)
81
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
2 DOC.ETD 25(6607) Escalators and moving walks Part 1: Safety requirements
3 DOC.ETD 25(6608) Escalators and moving walks Part 2 : Guide for Planning and Selection
4 DOC.ETD 25(6609) Escalators and moving walks Part 3 : Construction and Installation
DRAFT STANDARDS FORMULATED
1 DOC.ETD 25(6599) Electric Traction Lifts. Part 6 Replacement of existing passenger and goods passenger lifts in existing building
2 DOC.ETD 25(6611) Guide for Maintenance for lift and escalators
82
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 28 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
To prepare standards for systems of photovoltaic conversion of solar energy into electrical energy and for all the elements in the entire photovoltaic energy systems
In this context, the concept photovoltaic energy systems includes the entire field from light input to solar cell and including the interface with the electrical system(s) to which energy is supplied
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Jan 2010IS 12762(Part 1):2010
/ IEC 60904-1:2006
Photovoltaic devices: Part 1 Measurement of photovoltaic current-voltage characteristics[first revision)
2 Apr 2009* IS 12762(Part 2):1993
/ IEC 60904-2(1989)
Photovotaic devices: Part 2 Requirements for reference solar cells
3 Apr 2009* IS 12762(Part 3):1998
/ IEC 60904-3(1989)
Photovoltaic devices: Part 3 measurement principles for terrestrial (PV) solar devices with reference spectral irradiance data
4 Jan 2010IS 12762(Part 5):2010
/ IEC 60904-5:1993
Photovoltaic devices: Part 5 Determination of theequivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
5 Jan 2010IS 12762(Part 8):2000
/ IEC 60904-8:1998)
Photovoltaic devices: Part 8 Measurement of spectral response of a photovoltaic (PV) device
6 IS 12762(Part 9):2010
/ IEC 60904-9:2007
Photovoltaic devices: Part 9 Solar simulator performance requirments
7 IS 12762(Part 10):2010
/ IEC 60904-10:1998
Photovoltaic devices: Part 10 Methods of linearity measurment
8 Jan 2010IS 12763:1989
/ IEC 60891(1987)
Procedures for temperature and irradiance corrections to measured I-V characteristics of crystaline silicon photovoltaic devices
9 Jan 2010* IS 12834:1989 Solar photovoltaic energy systems-Terminology
10 Apr 2009** IS 14153:1994 Guide for general description of photovoltaic (PV) power generating systems
11 Jan 2010IS 14244:1995
/ IEC 61194(1992)
Characteristic parameters of stand alone photovoltaic (PV) systems
12 Jan 2010IS 14286:2010
/ IEC 61215:2005
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualiication and type approval (first revision)
13 Feb 2010IS 61683:1999
/ IEC 61683:1999
Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
14 Feb 2010IS 61701:1995
/ IEC 61701:1995)
Salt mist corrosion testing of photovoltaic (PV) modules
15 Feb 2010IS 61724:1998
/ IEC 61724:1998
Photovoltaic system performance monitoring - Guidelines for measurment, data exchange and analysis
16 Jan 2010IS 61725:1997
/ IS/IEC 61725(1997)
Analytical expression for daily solar profiles
83
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
17 Jan 2010IS 61730(Part 1):2004 Photovoltaic (PV) module safety qualification:Part 1 Requirments for construction
18 Feb 2010IS 61730(Part 2):2004
/ IEC 61730-2:2004
Photovoltaic (PV) module safety qualification:Part 2 Requirments for testing
19 Feb 2010IS 61829:1995
/ IEC 61829 : 1995
Crystalline silicon photovoltaic (PV) array - On site measurment of I-V characteristics
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 28(6016) Solar photovoltaic energy systems - Terms and symbols (first revision of IS 12834) (IEC/TS 61836 2007:)
2 DOC.ETD 28(6018) Photovoltaic devices: Part 7 Computation of spectral mismatch error introduced in the testing of a photovoltaic device (IEC 60904-7 : 2008 )
3 DOC.ETD 28(6025) Thin-film terrestrial photovoltaic (PV) modules -Design qualification and type approval (IEC 61646 : 2008 )
4 DOC.ETD 28(6295) Photovoltaic devices: Part 2 Requirements for reference solar cells (First Revision of IS 12762 (Part 2))
5 DOC.ETD 28(6296) Photovoltaic devices Part 3 Measurement principles for terrestrial (PV) solar devices with reference spectral irradiance data (First Revision of IS 12762 (Part 3)
6 DOC.ETD 28(6297) Procedures for temperature and irradiance corrections to measured I-V characteristics of crystaline silicon photovoltaic devices
7 DOC.ETD 28(6415)
/ IEC 62108(2007-12)
Concentrator Photovoltaic (CPV) Modules And Assemblies Design Qualification And Type Approval
8 DOC.ETD 28(6416)
/ IEC 62093 (2005)
Balance-Of-System Components For Photovoltaic Systems - Design Qualification Natural Environments
9 DOC.ETD 28(6417)
/ IEC 62109-1(2010)
Safety Of Power Converters For Use in Photovoltaic Power Systems - Part 1: General Requirements
10 DOC.ETD 28(6418)
/ IEC 62109-2 (2011)
Safety Of Power Converters For Use In Photovoltaic Power Systems - Part 2: Particular Requirements For Inverters
11 DOC.ETD 28(6419)
/ IEC 62124 (2010)
Photovoltaic (Pv) Stand-Alone Systems -Design Verification
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 28(6554)
/ IEC 60904-5 (2011)
Photovoltaic Devices - Part 5 : Determination of the equivalent cell temperature (ECT) of Photovoltaic (PV) Devices by the open-circuit voltage method (First Revision of IS 12762 (Part 5)
2 DOC.ETD 28(6555)
/ IEC 60904-10 (2010)
Photovoltaic Devices - Part 10 : Methods of Linearity Measurement (First Revision of IS 12762 (Part 10)
3 DOC.ETD 28(6556)
/ IEC 61701 (1995)
Salt Mist Corrosion Testing of Photovoltaic (PV) Modules (First Revision of IS/IEC 61701)
4 DOC.ETD 28(6557)
/ IEC 62116 (2008)
Test Procedure Of Islanding Prevention Measures for Utility-Interconnected Photovoltaic Inverters
84
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
5 DOC.ETD 28(6559)
/ IEC 61345 (1998)
UV Test For Photovoltaic (PV) Modules
6 DOC.ETD 28(6560)
/ IEC 61853-1 (2011)
Photovoltaic (PV) Module Performance Testing And Energy Rating - Part 1: Irradiance and temperature performance measurements and power rating
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 28(6616)
/ IEC 60904-4 (2009)
Photovoltaic Devices Part 4 : Reference solar devices - Procedures for establishing calibration traceability
2 DOC.ETD 28(6617)
/ IEC 62446 (2009)
Grid Connected Photovoltaic Systems - Minimum And Requirements For System Documentation, Commissioning Tests Inspection
DRAFT STANDARDS FORMULATED
1 DOC.ETD 28(6495) Led based solar lantern : Part 1 : Specifications
2 DOC.ETD 28(6496) Led based solar lantern : Part 2: Methods of test
85
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 29 POWER CAPACITORS
To prepare standards for power capacitors such as series and shunt capacitors for power systems, self-healing and non-self-healing power capacitors with metallized dielectric, ac motor capacitors,capacitors for inductive heating plants,voltage grading capacitors,coupling capacitors,energy storage capacitors etc.
NOTE - The standards for capacitors used in electronic circuits are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2011 2IS 1709:1984
| IEC 252:1975
Capacitors for electric fan motors (first revision)
2 Jul 2008IS 2993:1998
/ IEC 60252:1993
A.C. motor capacitors (second revision)
3 Mar 2011 1IS 9251:1979
| IEC 60110:1973
Capacitors for inductive heat generating plants operating at frequencies between 40 and 24 000 Hz
4 Jul 2008IS 9348:1998
/ IEC 60358:1990
Coupling capacitor and capacitor dividers
5 Jan 2011IS 9835(Part 1):2001
/ IEC 60143-1:1992
Series capacitors for power systems:Part 1 General performance testing and rating- Safety requirements - guide for installation (first revision)
6 IS 9835(Part 3):2012 Series capacitors for power systmes - Part 3 : Internal fuses (IEC 60143-3:1998)
7 Mar 2011IS 11530:1985
| IEC 60358 :1990
Voltage grading capacitor
8 Mar 2011 1IS 11548:1986 Capacitors for surge protection for use involtage system above 650 V and upto 33 kV
9 Mar 2011IS 12672:1989
/ IEC 60593:1977
Internal fuses and internal overpressure disconnectors for shunt capacitors
10 Mar 2011IS 12677:1989
| IEC 60595:1977
Internal fuses for series capacitors
11 Mar 2011IS 12730:1989
| IEC 60594:1977
Internal fuses and internal overpressure disconnectorsfor capacitors for inductive heat generating plants
12 Mar 2011IS 13203:1991
| IEC 60996:1989
Method for verifying accuracy of tan-delta measuremnts
13 IS 13340(Part 1):2012 Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 1 000 V - Part 1 General performance, testing and rating - safety requirements - Guide for installation and operation (first revision of IS 13340 (IEC 60831-1:2002)
14 IS 13340(Part 2):2012 Shunt capacitors of the self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 2 Ageing test self-healing upto and destruction test (first revision of IS 13341 (IEC 60831-2:1995)
86
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
15 Apr 2008 1IS 13341:1992
| IEC 60831-2:1988
Requirements for ageing test, self-healing test and destruction test on shunt capacitors of the self-healing type for ac power systems having a rated voltage upto and including 650 V
16 Apr 2013IS 13580:1992
| IEC 60594:1977
Internal fuses and internal overpressure disconnectors for power electronic capacitors
17 IS 13585(Part 1):2012
| IEC 60931-1:1996
Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 1 General - performance, - Guide for installation and operation (first revision of IS 13585 (Part 1) (IEC 60931-1:1996)
18 IS 13585(Part 2):2012 Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 2 Ageing test and destruction test (IEC 60931-2:1996)
19 IS 13585(Part 3):2012 Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 3 Internal fuses (IEC 60931-3:1996)
20 Apr 2013IS 13648:1993
| IEC 61071-1:1991
Power electronics capacitors
21 Sep 2008IS 13666:1993 Energy storage capacitors
22 2IS 13925(Part 1):2012
| IEC 60871-1:2005
Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 1General performance, testing and rating safety requirements - Guide for installation and operation (superseding IS 2834:1986)(First Revision)
23 Mar 2012IS 13925(Part 2):2002
/ IEC60871-2:1999
Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 2 Endurance testing (first revision)
24 Mar 2012IS 13925(Part 3):2002
/ IEC 60871-3:1996
Shunt capacitors for ac power systems having a rated voltage above 1000 V: Part 3 Protection of shunt capacitors and shunt capacitors banks.
25 IS 13925(Part 4):2012 Shunt capacitors for AC power systems having a rated voltage above1 000V - Part 4 Internal fusses (IEC 60871-4:2005
26 Oct 2008IS 15395:2003
/ IEC 61642 :1997
Industrial ac net- work affected by harmonics-application of filters and shunt capacitors
27 Oct 2008IS 15406(Part 1):2003
/ IEC 61270-1:1996
Capacitors for microwave ovens: Part 1 General
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 29(6508)
/ 60110-1:1998
Power capacitors for induction heating installations - Part 1 : General (First revision of IS 9251)
2 DOC.ETD 29(6509)
/ 60110-2:2000
Power capacitors for induction heating installations - Part 2 : Ageing test, destruction test and requirements for disconnecting internal fusesl (First revision of IS 9251)
87
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 30 SURGE ARRESTERS
To prepare standards on surge arresters and their accessories, application guide for surge arrestors for different locations
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Apr 2009* IS 3070(Part 3):1993
| IEC 60099-4:1991
Lightning arresters for alternating current systems :Part 3 Metal oxide surge-arresters without gaps for ac systems
2 Jul 2011 1IS 15086(Part 1):2001
/ IEC 60099-1:1991
Surge arresters: Part 1 Non-linear resistor type gapped surge arresters for a.c. systems [Superseding IS 3070(Part 1)]
3 Jul 2008IS 15086(Part 3):2003
| IEC 60099-3:1990
Surge arresters: Part 3 Artificial pollution testing of surge arresters
4 Jul 2011IS 15086(Part 5):2001
/ IEC 60099-5:1996
Surge arresters : Part 5 Selection and application recommendations (Superseading IS 4004)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 30(6595) Surge arresters Part 8 Metal oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV [IEC 60099-8(2011)]
2 DOC.ETD 30(6639) Surge Arresters – Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341 ([IEC/PAS 60099-7(2004)]
88
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 31 POWER ELECTRONICS
To prepare standards regarding equipment and their components for electronic power switching
NOTE 1 - Components which are comprised within the scope include electronic devices
NOTE 2- The scope does not include telecommunication apparatus other than convertors for power supplies to such apparatus, nor does it include power supplies for electrical measurement
NOTE 3- The standards for inverters for photovoltaic energy systems are excluded
NOTE 4- Converters for HVDC systems are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2011 2IS 2511:1963
| IEC 60119(1960)
Specification for Polycrystalline semiconductor rectifier stacks
2 Mar 2011IS 3136:1965
| IEC 60119(1960)
Specification for Polycrystalline semiconductor rectifier equipment
3 Mar 2011IS 3895:1966
| IEC 60146(1963)
Specification for Monocrystalline semiconductor rectifier cells and stacks
4 Mar 2011IS 4540:1968
| IEC 60146(1963)
Specification for Monocrystalline semiconductorrectifier assemblies and equipment
5 Mar 2011IS 6619:1972 Specification for Safety code for semiconductor rectifier equipment
6 Mar 2011IS 7204(Part 1):1974 Specification for Stabilized power supplies dc output:Part 1 Terms and definitions .
7 Mar 2011IS 7204(Part 2):1980
| IEC 60478-2(1975)
Specification for Stabilized power supplies dc output: Part 2 Rating and performance .
8 Mar 2011IS 7204(Part 3):1980
| IEC 60478-3(1976)
Specification for Stabilized power supplies dc output: Part 3 Radio frequency interference tests
9 Mar 2011IS 7204(Part 4):1980
| IEC 60478-4(1976)
Specification for Stabilized power supplies dc output: Part 4 Tests other than radio-frequency interference.
10 Mar 2011IS 7788:1975
| IEC 60411(1973)
Specification for Single-phase traction power converters
11 Mar 2011IS 11260(Part 1):1985
| IEC 60686(1980)
Specification for Stabilized power supplies ac output:Part 1Ratings and performance .
12 Mar 2011IS 11260(Part 2):1985
| IEC 60686 (1980)
Specification for Stabilized power supplies ac output:Part 2 Tests
13 Apr 2013IS 13314:1992 Solid state invertors run from storage batteries - Specification
14 Mar 2010IS 14256:1995
| IEC 61136-1(1992)
Rating specification for semiconductor power converters for adjustable speed electric drive systems - particularly for DC motor drives.
15 Sep 2012IS 15199(Part 1):2002
/ IEC 61287-1(1995)
Power convertors: installed on board railway rolling stock - Part 1 Characteristics and test methods
89
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 Sep 2012IS 15199(Part 2):2002
/ IEC 61287-2(2001)
Power convertors: installed on board railway rolling stock - Part 2 Additional technical information
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 31(6127) Uninterruptible power systems (UPS) :Part 2 electromagnetic compatibility (EMC) requirements
2 DOC.ETD 31(6432)
/ IEC 62040-1 (2008)
Uninterruptible power systems (UPS) : Part 1 General and safety requirements,
3 DOC.ETD 31(6433)
/ IEC 62040-3 (2011)
Uninterruptible power systems (UPS) : Part 3 Method of specifying the performance and test requirements
90
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 32 ELECTRICAL APPLIANCES
To prepare standards for electrical appliances for household and similar purpopses, including associated controls
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 2IS 302(Part 1):2008
| IEC 60335-1(2006)
Safety of household and similar electrical appliances: Part 1 General requirements (sixth revision)
2 Mar 2009 1IS 302(Part 2/Sec 2):1997
| IEC 60335-2-2(1993)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 2 Vacuum cleaners and water suction cleaning appliances
3 Jun 2012 1IS 302(Part 2/Sec 3):2007
| IEC 60335-2-3(2002)
Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 3 Electric iron (first revision)
4 Mar 2009 1IS 302(Part 2/Sec 4):1993
| IEC 60335-2-4(1984)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 4 Spin extractors
5 IS 302(Part 2/Sec 6):2009
| IEC 60335-2-6(1986)
Safety of household and similar electrical appliances: Part 2 Particuar requirements, Section 6 Cooking ranges, cooking tables, ovens and similar appliances (First Revision)
6 Mar 2009 2IS 302(Part 2/Sec 7):2009
| IEC 60335-2-7(1984)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 7 Domestic electric clothes washing machines
7 Mar 2009 1IS 302(Part 2/Sec 8):1994
| IEC 60335-2-8(1987)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 8 Electric shavers, hair clippers and similar appliances
8 IS 302(Part 2/Sec 9):2009
| IEC 60335-2-9(1986)
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 9 Electric toasters, grills, roastors and similar appliances (First Revision)
9 Mar 2009 1IS 302(Part 2/Sec 11):1994
| IEC 60335-2-11(1976)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 11 Tumbler dryers
10 Mar 2009 1IS 302(Part 2/Sec 12):1993
| IEC60335-2-12(1987)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 12 Warming plates and similar appliances
11 Mar 2009 1IS 302(Part 2/Sec 13):1994
| IEC 60335-2-13(1987)
Safety of household and similar electrical appliances :Part 2 particular requirements, Section 13 Frying pans, deep fat fryers and similar appliances
12 IS 302(Part 2/Sec 14):2009
| IEC 60335-2-14(1984)
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 14 Electric kitchen machines (First Revision)
13 IS 302(Part 2/Sec 15):2009
| IEC 60335-2-15(1986)
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 15 Appliances for heating liquids (First Revision)
14 IS 302(Part 2/Sec 21):2011
| IEC 60335-2-21(1989)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 21 Stationary storage type electric water heater (First Revision
91
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
15 IS 302(Part 2/Sec 23):2009
| IEC 60335-2-23(1986)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 23 Appliances for skin and hair care (First Revision)
16 Mar 2009IS 302(Part 2/Sec 24):1994
| IEC 60335-2-24(1992)
Safety of household and similar electrical appliances:Part 2 Particular requirements, Sec 24 Refrigerators, food freezers and ice makers
17 Mar 2009 1* IS 302(Part 2/Sec 25):1994
| IEC 60335-2-25(1988)
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 25 Microwave ovens
18 Mar 2009 1IS 302(Part 2/Sec 26):1994
| IEC 60335-2-26(1987)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 26 Clocks
19 Aug 2012 1IS 302(Part 2/Sec 30):2007
| IEC 60335-2-30(2002)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 30 Room heaters (first revision)
20 IS 302(Part 2/Sec 31):2009
| IEC 60335-2-31 2002)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 31 Range Hoods
21 Mar 2009 1IS 302(Part 2/Sec 32):1994
| IEC 60335-2-32(1993)
Safety of household and similar electrical appliances: Part 2 Particular requirements:Section 32 Massage appliances
22 1IS 302(Part 2/Sec 35):2011
| IEC 60335-2-35(1991)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 35 Electric instantaneous water heater(First Revision
23 Mar 2009 1IS 302(Part 2/Sec 45):1994
| IEC 60335-2-45(1986)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 45 Electric heating tools
24 Mar 2009IS 302(Part 2/Sec 46):1993
| IEC 60335-2-46(1986)
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 46 Electric steam cookers
25 Mar 2009IS 302(Part 2/Sec 59):1999
| IEC 60335-2-59(1990)
Safety of household and similar electrical appliances : Part 2 Particular requirements , Section 59 Insect killers
26 Mar 2009IS 302(Part 2/Sec 76):1999
| IEC 60335-2-76(1997)
Safety of household and similar electrical appliances Part 2 Particular requirements, Section 76 Electric fence energizers
27 Sep 2008* IS 302(Part 2/Sec 80):2003
| IEC 60335-2-80
Safety of household and similar electrical appliances:Part 2 Particular requirements, Sec 80 Fans (Superseding IS 12155:1987)
28 1IS 302(Part 2/Sec 201):2008
| IEC 60335-2-74(2002)
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 201 Electric immersion water heaters(first revision)
29 Mar 2009 2IS 302(Part 2/Sec 202):1992 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 202 Electric stoves
30 Mar 2009 1IS 302(Part 2/Sec 203):1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 203 Electric call bells and buzzers for indoor use
31 Mar 2009 1IS 302(Part 2/Sec 204):1994 Safety of household and similar electrical appliances: Part 2 Particular requirements:Section 204 Electric water boilers
92
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
32 Mar 2009 1IS 302(Part 2/Sec 206):1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 206 Electric coffee machines
33 Mar 2009 1IS 302(Part 2/Sec 207):1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 207 Electric hot plates
34 Mar 2009 1IS 302(Part 2/Sec 208):1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 208 Single walled baking ovens
35 Jul 2010 3IS 302(Part 2/Sec 209):1996 Safety of household and similar electrical appliance: Part 2 Particular requirements , Section 209 Portable low speed food grinding machines
36 Mar 2009 3IS 365:1983
| IEC 60302-2-6(1982)
Electric hot plates (second revision)
37 Apr 2013 6* IS 366:1991
| IEC 60311(1988)
Electric irons (fourth revision)
38 Mar 2009IS 367:1993
| IEC 60530(1975)
Electric kettles and jugs for household and similar use (fourth revision)
39 Mar 2009 1* IS 368:1992 Electric immersion water heaters (fourth revision)
40 Feb 2011 2* IS 369:1992
| IEC 60675
Electric radiators (third revision)
41 Sep 2010 6* IS 374:1979 Electric ceiling type fans and regulators (third revision)
42 Jul 2010 2* IS 555:1979 Electric table type fans and regulators (third revision)
43 Mar 2009IS 959:1994 Electric soldering irons (second revision)
44 Mar 2009 6* IS 1169:1967 Electric pedestal type fans and regulators (first revision)
45 Mar 2009IS 1287:1993
| IEC 60442(1973)
Electric toasters (third revision)
46 Apr 2013IS 1401:2008
/ IEC 61032 : 1997
Protection of persons and equipment by enclosures - Probes for verification (second revision)
47 Aug 2011 2IS 1415:1966 Electric hand lamps (revised)
48 Nov 2009 5* IS 2082:1993
| IEC 60379(1982)
Stationary storage type electric water heaters (fourth revision)
49 Mar 2009IS 2268:1994 Electric call bells and buzzers for indoor use (second revision)
50 Jul 2010 8* IS 2312:1967
| IEC 60665(1981)
Propeller type ac ventilating fans (first revision)
51 Mar 2009IS 2994:1992 Electric stoves (second revision)
52 Jul 2010 8IS 2997:1964 Air circulator type electric fans and regulators
93
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
53 Aug 2011 5IS 3017:1985
| IEC 60730(1982)
Thermostats for use with electric water heaters (first revision)
54 Mar 2009IS 3412:1994 Electric water boilers (second revision)
55 Mar 2009 5IS 3481:1966 Electric portable lamp stands and brackets
56 Aug 2009 1IS 3588:1987 Electric axial flow fans (first revision)
57 Aug 2011 4IS 3724:1966 Cartridge type heating elements (non-embedded type)
58 Jan 2011 3* IS 3725:1966 Resistance wires, tapes and strips for heating elements
59 Aug 2009 1IS 3963:1987 Roof extractor units (first revision)
60 Aug 2011 4IS 4158:1985 Solid embedded type electric heating elements(first revision)
61 Mar 2012 2IS 4159:2002
| IEC 60335-2-73(1994)
Mineral filled sheathed heating elements (third revision)
62 Aug 2011IS 4165:1991
| IEC 60730(1982)
Thermostats for general purpose electric ovens (first revision)
63 Dec 2009 9IS 4250:1980 Domestic Electric food mixers (liquidizers and grinders) and Centrifugal Juicers (first revision)
64 Aug 2009 3* IS 4283:1981 Hot air fans (first revision)
65 Aug 2009 4IS 4327:1967 Electric fans and regulators for use in ships
66 Aug 2009IS 4894:1987 Centrifugal fans (first revision)
67 Aug 2011 2IS 5159:1969 Mains-operated electric shavers
68 Aug 2011 4IS 5161:1969 Flexible electric heating pads for domestic use
69 Aug 2011 1IS 5579:1985 Neon testers (first revision)
70 Sep 2009 3IS 5790:1985
| IEC 60350
Domestic electric cooking ovens (first revision)
71 Aug 2009 2IS 6272:1987 Industrial cooling fans (man coolers) (first revision)
72 Aug 2011 5IS 6290:1986
| IEC 60311(1970)
Steam irons (first revision)
73 Aug 2011 5IS 6365:1971 Laboratory electric ovens
74 Mar 2009IS 6390(Part 2):1992 Domestic electrical clothes washing machines: Part 2 Requirements for tumbler dryers
75 Dec 2009 5IS 6446:1986 Mica insulated heating elements (first revision)
94
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
76 Aug 2009IS 6680:1992
| IEC 60342-1
Railway carriage fans (first revision)
77 Aug 2011 2IS 7137:1973 Portable, hand held mains-operated electric massagers
78 Mar 2009 1IS 7154:1994 Mains-operated electric hair-dryers (first revision)
79 Jul 2010 3IS 7603:1975 Low speed food grinding machines
80 Aug 2011IS 8506:1977 Laboratory electric resistance furnaces
81 Dec 2009 2IS 8978:1992 Electric instantaneous water heaters (second revision)
82 Aug 2011 1IS 8985:1978 Single walled baking ovens
83 Apr 2013 2IS 10436:1983
| IEC 60335-2-13
Electric frying pans and deep fat fryers
84 Aug 2011 1IS 10975:1984 Electric gas lighters
85 Aug 2011IS 11676:1995
| IEC 60705(1988)
Microwave ovens for household and similar purposes
86 Aug 2011 2IS 11879:1986 Electric steam cookers
87 Mar 2009IS 12289:1988
| IEC 60745-1
Hand held electric engraving tools
88 Aug 2011IS 13231:1991 Warming plates
89 Aug 2009IS 13368:1992 Method of test for double inlet centrifugal fans (industrial type)
90 Mar 2009IS 13588:1993
/ IEC 60817(1984)
Spring operated impact test apparatus and calibration
91 Mar 2009IS 13886:1993
| IEC 60730(1892)
Bimetallic thermostats and thermal cutouts for use with electric irons
92 Mar 2009 1IS 14144:1994
| IEC 60661(1980)
Electric coffee makers (Superseding IS 3514)
93 Apr 2013IS 14145:1994 Mains operated clocks(superseding IS 5160)
94 Mar 2009 1IS 14155:1994
| IEC 60456(1974)
Domestic electric clothes washing machines for domestic use [Superseding IS 6390(Part 1):1983 and IS 6390 (Part 3): 1992]
95 Aug 2011IS 15644:2006
/ IEC 62115(2003)
Safety of electric toys
96 IS 60730(Part 1):1999
/ IEC 60730-1 : 1999
Automatic electrical controls for household and similar use: Part 1 General requirements
95
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 32(6325) Automatic electric controls for household and similar use Part 2 Particular requirements for temperature sensing controls
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 32(6408) Household and similar electrical appliances : Part 1 General requirements (IEC 60335-1)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 32(6618) Cartridge type heating elements (non-embedded type) (First Revision of IS 3724)
2 DOC.ETD 32(6333) Draft Indian Standard For Electric Instantaneous Water Heaters (Third Revision of IS 8978)
3 DOC.ETD 32(6442) Specification for electric immersion water heaters (fifth revision of IS 368)
4 DOC.ETD 32(6477) Household electric direct-acting room heaters - Performance requirements (Fourth Revision of IS 369)
5 DOC.ETD 32(6581) Stationary storage type electric water heaters (fifth revision of IS 2082)
6 DOC.ETD 32(6592) Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 25 Microwave Ovens, Including Combination Microwave Ovens (First Revision of IS 302-2-25)
7 DOC.ETD 32(6593) Electri ceiling type fans and regulators - Specification (fourth revision of IS 374)
8 DOC.ETD 32(6594) Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans (First Revision)
9 DOC.ETD 32(6605) Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 26 Clocks (First Revision of IS 302-2-26)
DRAFT STANDARDS FORMULATED
1 2001DOC.ETD 32(6619) Mineral filled sheathed heating elements (fourth revision of IS 4159)
96
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 33 WINDING WIRES
To prepare standards for wires for electrical winding irrrespective of conductor material, shape or type of covering taking into account the needs in the fields of electrotechnology
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Feb 2010IS 482:1981 Reels for covered round electrical winding wires (third revision)
2 Feb 2010IS 2069:1991 Drums for covered winding wires and strips for electrical purpose (second revision)
3 Feb 2010 1IS 4685(Part 1):1968 Varnish bonded glass-fibre covered copper conductors: Part 1 Round wires
4 Jun 2008IS 5825:1993
/ IEC 60172(1987)
Test procedure for the determination of the temperature index of enamelled winding wires (first revision)
5 Jun 2008 4IS 6162(Part 1):1971
| IEC 60111
Paper covered aluminium conductors : Part 1 Round conductors
6 Jun 2008 5IS 6162(Part 2):1971
| IEC 60111
Paper covered aluminium conductors:Part 2 Rectangular conductors
7 Jun 2008 1IS 6181:1971 Varnish bonded glass-fibre braided rectangular copper conductors
8 Jun 2008 2IS 7391(Part 1):1974
| IEC 60182
Cotton covered copper conductors : Part 1 Round conductors
9 Jun 2008IS 7391(Part 2):1974 Cotton covered copper conductors : Part 2 Rectangular conductors (superseeding IS:2068)
10 Feb 2010IS 7404(Part 1):1991 Paper covered copper conductors : Part 1 Round conductors [superseeding IS:3454) (first revision)
11 Jun 2008IS 7576:1974
| IEC 60317-1
Bunched enamelled copper conductors with silk covering
12 Jun 2008IS 8572:1993 Paper covered flexible/stranded copper conductors for transformer leads (first revision)
13 Feb 2010 1IS 8783(Part 1):1995 Winding wires for submersible motors Part 1: Conductor data (first revision)
14 Feb 2010 1IS 8783(Part 2):1995 Winding wires for submersible motors Part 2: Materials for dielectric and jacket (first revision)
15 Feb 2010 2IS 8783(Part 3):1995 Winding wires for submersible motors Part 3: Methods of tests (first revision)
16 Feb 2010 1IS 8783(Part 4/Sec 1):1995 Winding wires for submersible motors Part 4: Specifications for individual wires, Section 1 HR PVC insulated wires (first revision)
17 Feb 2010IS 8783(Part 4/Sec 2):1995 Winding wires for submersible motors Part 4: Specifications for individual wires,Section 2 Crosslinked polyethylene insulated and polyamide jacketed wires (first revision)
97
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
18 Feb 2010 1IS 8783(Part 4/Sec 3):1995 Winding wires for submersible motors Part 4: Specifications for individual wires, Section 3 Polyester and polypropylene insulated winding wires (first revision)
19 Feb 2010 1IS 9148:1979 Tape wrapped rectangular and square copper wires with a temperature index of 220
20 Feb 2010 1IS 9778:1981 Guide for evaluation of thermal endurance of varnish bonded glass-fibre covered rectangular copper conductors
21 Feb 2010IS 10031:1981
| IEC 60264-3(1973)
Taper barrelled delivery spools for covered round electrical winding wires
22 Feb 2010IS 11174:1984 Aromatic polyamide paper covered rectangular and square copper wires with temperature index 200
23 Feb 2010 1IS 11184:1984 Enamelled and varnish bonded glass fibre covered round copper wires
24 Feb 2010IS 11395:1985 Tape wrapped round copper wires with temperature index of 220
25 Feb 2010IS 11597:1986 Polyester tape wrapped, varnish bonded glass-fibre covered rectangular paper conductors
26 Aug 2008IS 13343:1992 Guide for evaluation of thermal endurance of enamelled and varnish bonded glass covered copper conductors
27 IS 13730:2012
/ IEC 60317-0-1:2008
Specifications for particular types of winding wires: Part 0 General requirements, Section 1 Enamelled round copper wire (First Revision)
28 IS 13730(Part 0/Sec 2):2011
/ IEC 60317-0-2:2005
Specifications for particular types of winding wires: Part 0 General requirements, Section 2 Enamelled rectangular copper wire (First Revision)
29 IS 13730:2012
/ IEC 60317-0-3:2008
Specifications for particular types of winding wires Part 0-3: General requirements – Enamelled round aluminium wire [First Revision of IS 13730 (Part 0/Sec 3):1994] I
30 IS 13730(Part 0/Sec 4):2011
/ IEC 60317-0-4:2006
Specifications for particular types of winding wires: Part 0 General requirements, Section 4 Glass fibre wound resin of varnish impregnated bare or enamelled rectangular copper wire (First Revision)
31 IS 13730(Part 0/Sec 5):2012
/ IEC 60317-0-5(2006)
Specifications for particular types of winding wires: Part 0 General requirements, Section 5 glass fibre braided, bare or enamelled rectangular copper wire (First Revision)
32 Jun 2008IS 13730(Part 1):1993
/ IEC 60317-1(1990)
Specifications for particular types of winding wires: Part 1 Polyvinyl acetal enamelled round copper wire, class 105 [superseeds IS 4800(Part 4):1968]
33 IS 13730(Part 2):2012
/ IEC 60317-2 : 2000
Specifications for particular types of winding wires Part 2: Solderable polyurethane enamlled round copper wire, class 130, with a bonding layer. (First Revision)
34 Dec 2006* IS 13730(Part 3):1996
/ IEC 60317-3(1990)
Specifications for particular types of winding wires Part 3 polyester enamelled round copper wire, class 155
35 Jun 2008IS 13730(Part 4):1993
/ IEC 60317-4(1990)
Specifications for particular types of winding wires: Part 4 Solderable polyurethane enamelled round copper wire, class 130 [Superseeds IS 4800(Part 6):1968]
98
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
36 Feb 2010IS 13730(Part 6):1994 Specifications for particular types of winding wires : Part 6 Oleo-resinous enamelled round aluminium wire, Class 180 [Superseeds IS 4800(Part 7):1970]
37 Jun 2008IS 13730(Part 7):1993
/ IEC 60317-7(1990)
Specifications for particular types of winding wiresC Part 7 Polyimide enamelled round copper wire Class 220 [superseeds IS 4800(Part 11):1981]
38 Dec 2008IS 13730(Part 8):1996
/ IEC 60317-8(1990)
Specifications for particular types of winding wires: Part 8 polyesterimide enamelled round copper wire class 180
39 Feb 2010IS 13730(Part 9):1994 Specifications for particular types of winding wires :Part 09 Polyester enamelled round aluminium wire, Class 130
40 IS 13730(Part 12):2012
/ IEC 60317-12:2010
Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120
41 Jun 2008IS 13730(Part 13):1993
/ IEC 60317-13(1990)
Specifications for particular types of winding wires: Part 13 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200
42 Feb 2010IS 13730(Part 15):1994 Specifications for particular types of winding wires : Part 15 Polyesterimide enamelled round aluminium wire, Class 180
43 Dec 2006IS 13730(Part 16):1996
/ IEC 60317-16 (1990)
Specifications for particular types of winding wires: Part 16 Polyester enamelled rectangular copper wire, Class 155
44 Dec 2006IS 13730(Part 17):1996
/ IEC 60317-17 (1990)
Specifications for particular types of winding wires: Part 17 Polyvinyl acetal enamelled rectangular copper wire, Class 105
45 Jun 2008IS 13730(Part 20):1993
/ IEC 60317-20(1990)
Specifications for particular types of winding wires: Part 20 Solderable polyurethane enamelled round copper wire, Class 155
46 Jun 2008IS 13730(Part 26):1996
/ IEC 60317-26 (1990)
Specifications for particular types of winding wires: Part 26 Polyamide-imide enamelled round copper wire, Class 200
47 Jun 2008IS 13730(Part 27):1997
/ IEC 60317-27(1990)
Specifications for particular types of winding wires: Part 27 Paper covered rectangular copper wire
48 Jun 2008IS 13730(Part 28):1997
/ IEC 60317-28(1990)
Specifications for particular types of winding wires: Part 28 Polyesterimide enamelled rectangular copper wire, Class 180
49 Jun 2008IS 13730(Part 29):1996
/ IEC 60317-29(1990)
Specifications for particular types of winding wires: Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, Class 200
50 Jun 2008IS 13730(Part 31):1997
/ IEC 60317-31(1990)
Specifications for particular types of winding wires: Part 31 Glass-fibre wound, polyester or polyesterimide varnish- treated, bare or enamelled rectangular copper wire, temperature index 180
51 Jun 2008IS 13730(Part 32):1997
/ IEC 60317-32(1990)
Specifications for particular types of winding wires: Part 32 Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155
99
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
52 Jun 2008IS 13730(Part 33):1997
/ IEC 60317-33 (1990)
Specifications for particular types of winding wieres: Part 33 Glass-fibre wound, silicone varnish-treated bare or enamelled rectangular copper wire, temperature index 200
53 Feb 2010IS 13730(Part 34):2000
/ IEC 60317-34(1997)
Specifications for particular types of winding wires: Part 34 Polyester enamelled round copper wire, Class 130 (first revision)
54 Oct 2010IS 13730(Part 39):2005
/ IEC 60317-39:1992
Specifications for particular types of wires: Part 39 Glass-fibre braided polyester or polyesterimide varnish-treated, bare or enamelled rectrangular copper wire, temperature index 180
55 Oct 2010IS 13730(Part 43):2005
/ IEC 60317-43:1997
Specifications for particular types of wires: Part 43 Aromatic polyimide tape wrapped round copper wire, class 240
56 Nov 2010IS 13730(Part 44):2005
/ IEC 60317-44:1997
Specifications for particular types of wires: Part 44 Aromatic polyimide tape rapped rectangular copper wire, class 240
57 Mar 2009IS 13730(Part 45):1999 Specifications for particular type of winding wires : Part 45 Polyester enamelled round copper wire , class 130
58 Oct 2010IS 13730(Part 48):2005
/ IEC 60317-48:1999
Specifications for particular types of wires: Part 48 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 155
59 Oct 2010IS 13730(Part 49):2005
/ IEC 60317-49:1999
Specifications for particular types of wires: Part 49 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 180
60 Oct 2010IS 13730(Part 50):2005
/ IEC 60317-50:1999
Specifications for particular types of wires: Part 50 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 200
61 Oct 2010IS 13730(Part 53):2005
/ IEC 60317-53:1999
Specifications for particular types of wires: Part 53 Aromatic polyamide (aramid ) tape wrapped rectangular copper wire, temperature index 220
62 1IS 13778(Part 1):2011
/ IEC 60851-1:1996
Methods of tests for winding wires: Part 1 General (First Revision)
63 Jun 2008IS 13778(Part 2):1993
/ IEC 60851-2:1985
Methods of tests for winding wires: Part 2 Determination of dimensions
64 2IS 13778(Part 3):2012
/ IEC 60851-3:2009
Winding wires – Test methods - Part 3: Mechanical properties [First Revision of IS 13778 (Part 3)
65 IS 13778(Part 4):2011
/ IEC 60851-4:2005
Methods of tests for winding wires: Part 4 Chemical properties
66 1IS 13778(Part 5):2012
/ IEC 60851-5 : 2008
Winding wires – Test methods - Part 5: Electrical properties [First Revision of IS 13778 (Part 5)
67 IS 13778(Part 6):2011
/ IEC 60851-6:1996
Methods of tests for winding wires: Part 6 Thermal properties (First Revision)
68 Feb 2010IS 14841(Part 2/Sec 1):2000
/ IEC 60264-2-1:1989
Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools Section 1 Basic dimensions
69 Feb 2010IS 14841(Part 2/Sec 2):2000
/ IEC 60264-2-2:1990
Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material
70 Feb 2010IS 14841(Part 3/Sec 1):2000
/ IEC 60264-3-1:1999
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 1 basic dimensions
100
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
71 Feb 2010IS 14841(Part 3/Sec 2):2000
/ IEC 60264-3-2:1999
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material
72 Feb 2010IS 14841(Part 3/Sec 3):2000
/ IEC 60264-3-3:1990
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 3 Specification for non-returnable spools made from thermoplastic material
73 Feb 2010IS 14841(Part 3/Sec 4):2000
/ IEC 60264-3-4:1999
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 4 basic dimensions of containers for taper barrelled delivery spools
74 Feb 2010IS 14841(Part 4/Sec 1):2000
/ IEC 60264-4-1:1997
Packaging of winding wires: Part 4 Methods of test, Section 1 Delivery spools made from thermoplastic material
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 33(6337) Winding Wires – Test methods – Part 2 : Determination of dimensions (First Revision)
2 DOC.ETD 33(6373) Packaging of winding wires – Part 3-1: Taper barrelled delivery spools – Basic dimensions
3 DOC.ETD 33(6374) Packaging of winding wires – Part 4-1: Methods of test – Delivery spools made from thermoplastic materials
4 DOC.ETD 33(6375) Specifications for particular types of winding wires – Part 3: Polyester enamelled round copper wire, class 155
5 DOC.ETD 33(6376) Specifications for particular types of winding wires – Part 4: Solderable polyurethane enamelled round copper wire, class 130
6 DOC.ETD 33(6377) Specifications for particular types of winding wires – Part 8: Polyesterimide enamelled round copper wire, class 180
7 DOC.ETD 33(6409)
/ 60317-13:2010
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, clasee 200 (First Revision)
8 DOC.ETD 33(6410)
/ 60317-17:2010
Specifications for particular types of winding wires - Part 20 : Polyvinyl acetal enamelled rectangular copper wire, class 105 (first revision)
9 DOC.ETD 33(6411)
/ 60317-20:2000
Specifications for particular types of winding wires - Part 20: Solerable polyurethane enamelled round copper wire, class 155 (first revision)
10 DOC.ETD 33(6412)
/ 60317-43:2010
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 (first revision)
11 DOC.ETD 33(6413)
/ 60317-44:2010
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (first revision)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 33(6441)
/ 60315-25:2010
Specifications for particular types of winding wires - Part 25 : Po0lyester or polyesterimide over coated with polyamide-imide enamelled round aluminium wire class 200
101
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 34 INSTRUMENTS TRANSFORMERS
To prepare standards and application guides for instrument transformers
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Aug 2012 1IS 2705(Part 1):1992
| IEC 60185(1966)
Current transformers: Part 1 General requirements (second revision)
2 Aug 2012IS 2705(Part 2):1992
| IEC 60185(1966)
Current transformers: Part 2 Measuring current transformers (second revision)
3 Aug 2012IS 2705(Part 3):1992
| IEC 60185(1966)
Current transformers: Part 3 Protective current transformers (second revision)
4 Aug 2012IS 2705(Part 4):1992
| IEC 60185(1966)
Current transformers: Part 4 Protective current transformers for special purpose applications (second revision)
5 Aug 2012 1IS 3156(Part 1):1992
| IEC 60186(1987)
Voltage transformers: Part 1 General requirements (second revision)
6 Aug 2012IS 3156(Part 2):1992
| IEC 60186(1987)
Voltage transformers: Part 2 Measuring voltage transformers (second revision)
7 Aug 2012IS 3156(Part 3):1992
| IEC 60186(1987)
Voltage transformers: Part 3 Protective voltage transformers (second revision)
8 Aug 2012IS 3156(Part 4):1992
| IEC 60186(1987)
Voltage transformers: Part 4 Capacitor voltage transformers (second revision)
9 Sep 2011IS 4146:1983 Application guide for voltage transformers (first revision)
10 Sep 2011IS 4201:1983 Application guide for current transformers (first revision)
11 Sep 2011IS 5547:1983 Application guide for capacitor voltage transformers (first revision)
12 Sep 2011IS 6949:1973 Summation current transformers
13 Sep 2011IS 11322:1985
| IEC 44-4 (1980)
Method for partial discharge measurement in instrument transformers
14 Aug 2012IS 60044(Part 1):2003
/ IS/IEC 60044-1(2003)
Instrument transformers: Part 1 Current transformers
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 34(6320)
/ IEC 60040-3 (2002)
Instrument Transformers. Part 3 Combined Transformers
2 DOC.ETD 34(6323)
/ IEC 60040-7 (2002)
Instrument Transformers. Part 7 Electronic Voltage Transformers
3 DOC.ETD 34(6324)
/ IEC 60040-8 (2002)
Instrument Transformers.Part 8 Electronic Current Transformers
102
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 34(6525)
/ IEC 61869-1 : 2007
Instrument Transformers Part 1 : General Requirements
2 DOC.ETD 34(6526)
/ IEC 61869-3 : 2011
Instrument Transformers Part 3 : Additional Requirements for Inductive Voltage Transformers
3 DOC.ETD 34(6527)
/ IEC 61869-5 : 2011
Instrument Transformers Part 5 : Additional Requirements for Capacitors Voltage Transformers
103
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 35 POWER SYSTEM RELAYS
To prepare standards for power systems relays including those incorporating solid state devices, also taking into account combination of relays and devices to form schemes for power systems including control equipment associated with that protection
NOTE - Relays used in electronic equipment are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Feb 2009IS 3231(Part 0):1986 Electrical relays for power system protection: Part 0 General introduction and list of parts (first revision)
2 Sep 2011IS 3231(Part 1/Sec 1):1986 Electrical relays for power system protection: Part 1 General requirements, Section 1 Contact performance (first revision)
3 Sep 2011IS 3231(Part 1/Sec 2):1986 Electrical relays for power system protection: Part 1 General requirements, Section 2 Insulation tests (first revision)
4 Sep 2011IS 3231(Part 1/Sec 3):1986
| IEC 255-4 (1976)
Electrical relays for power system protection: Part 1 General requirements, Section 3 High frequency disturbance test for static relays (first revision)
5 Sep 2011IS 3231(Part 2/Sec 1):1987
| IEC 255-1-00
Electrical relays for power system protection: Part 2 Requirements for principal families, Section 1 All or nothing relays
6 Sep 2011IS 3231(Part 2/Sec 2):1987 Electrical relays for power system protection: Part 2 Requirements for principal families, Section 2 General requirements for measuring relays
7 Sep 2011IS 3231(Part 2/Sec 3):1987
| IEC 255-8 (1978)
Electrical relays for power system protection: Part 2 Requirements for principal families, Section 3 General requirements for thermal relays
8 Sep 2011 1IS 3231(Part 3/Sec 1):1987
| IEC 255-3 (1971)
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 1 Non-specified time or independent specified time measuring relays
9 Sep 2011IS 3231(Part 3/Sec 2):1987
| IEC 255-4 (1976)
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 2 Dependent specified time measuring relays
10 Sep 2011IS 3231(Part 3/Sec 3):1987
| IEC 255-13(1980)
Electrical relays for power system protection:Part 3 Requirements for particular group of relays, Section 3 Biased (percentage) differential relays
11 Sep 2011IS 3231(Part 3/Sec 4):1987
| IEC 255-12 (1980)
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 4 Directional relays and power relays
12 Sep 2011IS 3231(Part 3/Sec 5):1987
| IEC255-16 (1982)
Electrical relays for power system Protection: Part 3 Requirements for particular group of relays, Section 5 Impedance measuring relays
13 Sep 2011 1IS 3637:1966 Gas operated relays
14 Sep 2011 1IS 3638:1966 Application guide for gas operated relays
15 Sep 2011IS 3842(Part 1):1967 Application guide for electrical relays for ac systems:Part 1 Overcurrent relays for feeders and transformers
104
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 Sep 2011IS 3842(Part 2):1966 Application guide for electrical relays for ac systems:Part 2 Overcurrent relays for generators and motors
17 Sep 2011 1IS 3842(Part 3):1966 Application guide for electrical relays for ac systems:Part 3 Phase unbalance relays including negative phase sequence relays
18 Sep 2011 1IS 3842(Part 4):1966 Application guide for electrical relays for ac systems:Part 4 Thermal relays
19 Sep 2011IS 3842(Part 5):1968 Application guide for electrical relays for ac systems:Part 5 Distance protection relays
20 Sep 2011IS 3842(Part 6):1972 Application guide for electrical relays for ac systems:Part 6 Power relays
21 Sep 2011IS 3842(Part 7):1972 Application guide for electrical relays for ac systems: Part 7 Frequency relays
22 Sep 2011IS 3842(Part 8):1976 Application guide for electrical relays for ac systems:Part 8 Voltage relays
23 Sep 2011IS 3842(Part 9):1977 Application guide for electrical relays for ac systems:Part 9 Relays for busbar protection
24 Sep 2011IS 3842(Part 10):1976 Application guide for electrical relays for ac systems:Part 10 Relays for transverse differential protection
25 Sep 2011IS 3842(Part 12):1976 Application guide for electrical relays for ac systems:Part 12 Differential relays for transformers
26 Sep 2011IS 4483(Part 1):1968 Preferred panel cutout dimensions for electrical relays: Part 1 Flush mounting IDMTL relays
27 Feb 2009IS 5834(Part 1):1994 Electrical timer relays for industrial purposes (Part 1) Pneumatic (First revision)
28 Apr 2013 1IS 5834(Part 2):1993 Electrical timer relays for industrial purposes (Part 2) Motorized (first revision)
29 Feb 2009 2IS 5834(Part 3):1981 Electrical timer relays for industrial purposes (Part 3) Electronic
30 Sep 2011IS 8686:1977
| IEC 255-4
Static protective relays
31 Sep 2011IS 8714:1978 Electrical protective relays for use in siesmic areas
32 Sep 2011 1IS 9124:1979 Guide for maintenance and field testing of electrical relays
33 Sep 2011IS 9994:1981 Potential relays for capacitor start-capacitor run hermetic compressors
34 Sep 2011IS 10075:1981 Start relay and overload protector for resistance start induction run hermetic compressors
35 Sep 2011IS 12083(Part 1):1986
| IEC 255-0-20 (1974)
Electrical relays: Part 1 Contact performance
36 Sep 2011IS 12083(Part 2):1986
| IEC 255-5 (1977)
Electrical relays: Part 2 Insulation tests
37 Sep 2011IS 14122:1994
| IEC 60034-11(1978)
Built in thermal protection for electric motors rated up to 660 V ac
105
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
38 Feb 2009ISQC 160000 : 1988
/ IECQC 60255-7:1978
Electrical relays:Part 1 tests and measurement procedures for electromechanical all-or-nothing relays
39 Feb 2009ISQC 160000 : 1988
/ IECQC 60255-10:1979
Electrical relays:Part 2 Applications of the IEC quality assessment systems for electronic components to all-or-nothing relays
40 Feb 2009ISQC 160100 : 1988
/ IECQC 160100:1983
Electrical relays, sectional specification: Electromechanical all-or-nothing relays of assessed quality
41 Feb 2009ISQC 160101 : 1988
/ IECQC 160101:1993
Electrical relays, blank detail specification: electromechanical all-or-nothing relays of assessed quality, test schedules 1, 2 and 3
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 35(6529) Measuring relays and protection equipment – Part 1: Common requirements
2 DOC.ETD 35(6530) Electrical relays – Part 5: Insulation coordination for measuring relays and protection equipment – requirements and tests
3 DOC.ETD 35(6531) Electrical relays Part 8: Thermal electrical relays
4 DOC.ETD 35(6532) Measuring relays and protection equipment – Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
5 DOC.ETD 35(6533) Electrical relays Part 12: Directional relays and power relays with two input energizing quantities
6 DOC.ETD 35(6534) Electrical relays Part 13: Biased (percentage) differential relays
7 DOC.ETD 35(6535) Electrical relays Part 16: Impedance measuring relays
8 DOC.ETD 35(6536) Electrical relays Part 21: Vibration, shock, bump and seismic test on measuring relays and protection equipment section one — vibration tests (sinusoidal)
9 DOC.ETD 35(6537) Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment section two — shock and bump tests
10 DOC.ETD 35(6538) Electrical relays — Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment — section 3: seismic tests
11 DOC.ETD 35(6539) Measuring relays and protection equipment – Part 22-1: Electrical disturbance tests – 1 mhz burst immunity tests
12 DOC.ETD 35(6540) Measuring relays and protection equipment – Part 22-2: Electrical disturbance tests – electrostatic discharge tests
13 DOC.ETD 35(6541) Measuring relays and protection equipment – Part 22-3: Electrical disturbance tests – radiated electromagnetic field immunity
14 DOC.ETD 35(6542) Measuring relays and protection equipment – Part 22-4: Electrical disturbance tests – electrical fast transient/burst immunity test
15 DOC.ETD 35(6543) Measuring relays and protection equipment – Part 22-5: Electrical disturbance tests – surge immunity test
106
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 DOC.ETD 35(6544) Electrical relays – Part 22-6: Electrical disturbance tests for measuring relays and protection equipment – Immunity to conducted disturbances induced by radio frequency fields
17 DOC.ETD 35(6545) Electrical relays – Part 22-7: Electrical disturbance tests for measuring relays and protection equipment – Power frequency immunity tests
18 DOC.ETD 35(6546) Electrical relays – Part 24: Common format for transient data exchange (COMTRADE) for power systems
19 DOC.ETD 35(6547) Electrical relays Part 25: Electromagnetic emission tests for measuring relays and protection equipment
20 DOC.ETD 35(6548) Measuring relays and protection equipment – Part 26: Electromagnetic compatibility requirements
21 DOC.ETD 35(6549) Measuring relays and protection equipment – Part 27: Product safety requirements
22 DOC.ETD 35(6550) Measuring relays and protection equipment – Part 127: Functional requirements for over/under voltage protection
23 DOC.ETD 35(6551) Measuring relays and protection equipment –Part 151: Functional requirements for over/under current protection
107
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 36 TOOLS AND EQUIPMENTS FOR LIVE WORKING
To prepare standard on electrical and mechanical characteriistics as well as reliability requirements for tools and eqipment used in connections with work on energized electrical systems
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Dec 2009* IS 13770:1993
/ IEC 60855:1985
Insulating foam-filled tubes and solid rods for live working
2 Dec 2009* IS 13771:1993
/ IEC 60895:1987
Conductive clothing for live working at nominal voltage up to 800 kV ac
3 Dec 2009 1* IS 13772:1993
/ IEC 60900:1989
Hand tools for live working up to 1000 V ac and 1500 V dc
4 Dec 2009IS 13773:1993
/ IEC 60984:1990
Sleeves of insulating material for live working
5 Dec 2009* IS 13774:1993
/ IEC 60903:1988
Specification for gloves and mitts of insulating materials for live working
6 Dec 2009IS 13961:1994
/ IEC 60832:1988
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
7 Jun 2011* IS 14956:2001
/ IEC 61472:1998
Live working - Minimum approach distances - method of calculation
8 Jun 2011IS 14957:2001
/ IEC 61057:1991
Aerial devices with insulating boom used for live working
9 Jun 2011IS 14981:2001
/ IEC 61219:1993
Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - lance earthing
10 Jun 2011IS 14993:2001
/ IEC 61236:1993
Saddles, pole clamps (stick clamps) and accessories for live working
11 Jun 2011* IS 14994:2001
/ IEC 61318:1994
Live working - Guidelines for quality assurance plans
12 Nov 2008* IS 15405(Part 1):2003
/ IEC 61482-1:2002
Live Working - flame resistance materials for clothing for thermal protection of working thermal hazards of an electric arc Part 1 Test Methods
13 Nov 2008IS 15407:2003
/ IEC 61278:1997
Live working - Guidelines for dielectric testing of tools and equipment
14 Dec 2008IS 15416:2003
/ IEC 60743:2001
Live working - Terminology for tools equipments and devices (Superceding IS 13985)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 36(6392) Live Working - Insulating Foam-Filled Tubes and Solid Rods Part 1: Tubes and Rods of a Circular Cross-Section (first revision of IS 13770)
2 DOC.ETD 36(6393) Live Working - Conductive Clothing for use at Nominal Voltage Up to 800 Kv A.C. and +/- 600 Kv D.C. (first revision of IS 13771)
3 DOC.ETD 36(6395) Live Working - Gloves of Insulating Material (first revision of IS 13774)
108
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
4 DOC.ETD 36(6396) Live Working - Minimum Approach Distances for a.c. Systems in the Voltage Range 72,5 Kv To 800 Kv - A Method of Calculation (first revision of IS 14956)
5 DOC.ETD 36(6397) Live Working - Conformity Assessment Applicable to Tools, Devices and Equipment (first revision of IS 14994)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 36(6398) Live Working - Protective Clothing Against the Thermal Hazards of an Electric Arc - Part 1-1: Test Methods - Method 1: Determination of the Arc Rating (ATPV or Ebt50) of Flame Resistant Materials for Clothing (first revision of IS 15405)
2 DOC.ETD 36(6399) Live Working - Protective Clothing Against the Thermal Hazards of an Electric Arc - Part 1-2: Test Methods - Method 2: Determination of Arc Protection Class of Material and Clothing by using a Constrained and Directed Arc (Box Test) (first revision of IS 15405)
3 DOC.ETD 36(6627)
/ IEC 60900 (2012)
Live Working - Hand Tools for use up to 1000 V A.C. and 1500 V D.C. (first revision of IS 13772)
109
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 37 CONDUCTORS AND ACCESSORIES FOR OVERHEAD LINES
To prepare standards for conductors and accessories for overhead power lines and codes of practice for the design, installation and maintainance or overhead power lines
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Sep 2012 1IS 398(Part 1):1996
| IEC 60889:1987
Aluminium conductors for overhead transmission purposes: Part 1 Aluminium stranded conductors (third revision)
2 Sep 2012 3IS 398(Part 2):1996
| IEC 889 :1987
Aluminium conductors for overhead transmission purposes: Part 2 Aluminium conductors, galvanized steel reinforced (third revision)
3 Jul 2009 3IS 398(Part 3):1976 Aluminium conductors for overhead transmission purposes: Part 3 Aluminium conductors, aluminized steel reinforced (second revision)
4 Jul 2009 1IS 398(Part 4):1994
| IEC 60208:1966
Aluminium conductors for overhead transmission purposes: Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type) (third revision)
5 Sep 2012 2IS 398(Part 5):1992 Aluminium conductors for overhead transmission purposes: Part 5 Aluminium conductors, galvanized steel reinforced for extra high voltage (400 kV and above) (first revision)
6 Jul 2009 1IS 1778:1980 Reels and drums for bare conductors (first revision) (superseding IS:2889)
7 Sep 2012IS 2121(Part 1):1981 Conductors and earth wire accessories for overhead power lines: Part 1 Armour rods, binding wires and tapes for conductors (first revision)
8 Sep 2012IS 2121(Part 2):1981 Conductors and earth wire accessories for overhead power lines: Part 2 Mid span joints and repair sleeves for conductors (first revision)
9 Sep 2012IS 2121(Part 3):1992 Conductors and earthwire accessories for overhead power lines: Part 3 Accessories for earthwire (first revision)
10 Sep 2012IS 2121(Part 4):1991 Conductors and earth wire accessories for overhead power lines : Part 4 Non-tension joints (first revision)
11 Sep 2012IS 2532:1965 Hard-drawn copper wire for telegraph and telephone purposes
12 Sep 2012 4IS 2665:1964 Cadmium-copper wire for telegraph and telephone purposes
13 Sep 2012 1IS 3402:1965 Cadmium-copper conductors for overhead railway traction
14 Jul 2009IS 3476:1986 Trolley and contact wire for electric traction (first revision)
15 Sep 2012IS 5613(Part 1/Sec 1):1985 Code of practice for design, installation and maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 1 Design (first revision)
110
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
16 Sep 2012IS 5613(Part 1/Sec 2):1989 Code of practice for design, installation and maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 2 Installation and maintenance (first revision)
17 Sep 2012 1IS 5613(Part 2/Sec 1):1985 Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 1 Design (first revision)
18 Sep 2012 3IS 5613(Part 2/Sec 2):1985 Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 2 Installation and maintenance (first revision)
19 Jul 2009 1IS 5613(Part 3/Sec 1):1989 Code of practice for design, installation and maintenance of overhead power lines: Part 3 400 kV lines, Section 1 Design
20 Jul 2009IS 5613(Part 3/Sec 2):1989 Code of practice for design, installation and maintenance of overhead power lines: Part 3 400 kV lines, Section 2 Installation and maintenance
21 Jul 2009IS 9511:1980 Earth knobs for neutral conductors
22 Mar 2009IS 9708:1993 Stockbridge vibration dampers for overhead power lines (first revision)
23 Sep 2012 1IS 10162:1982 Spacers and spacer dampers for twin horizontal bundle conductors
24 Sep 2012IS 12048:1987 Helically formed fittings for overhead lines upto 33 kV
25 Jul 2009IS 14214:1994 Annealed stranded copper conductors for electric traction
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 37(5817) Specification for Steel Reels and Drums for Bare Conductor
111
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 39 FUSES
To prepare standards regarding specification for all types of fuses, with the object of determining :a) The characteristics which are essential in specifying the conditions for installation and operation of the fusesb) The requirements to be met by the fuses and the tests designed to ascertain their compliance with such requirements as well as the procedures to be followed for these tests c) Markings To prepare for these fuses standards, standard values of:1) Characteristics, rated voltages, currents and breaking capacities:2) Dimensions in connections with the fixing and interchangeability of high voltage and low voltage fuses
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Mar 2009 1IS 2086:1993 Carriers and bases used in rewirable type electric fuses for voltages upto 650 V(third revision) (Superseding IS 8724)
2 Mar 2011 1IS 8187:1976
| IEC 269-3(1973)
D-type fuses
3 Sep 2012IS 9385(Part 1):1979
| IEC 282-1(1979)
High voltage fuses:Part 1 Current limiting fuses
4 Sep 2012IS 9385(Part 2):1980
| IEC 282-2(1970)
High voltage fuses:Part 2 Expulsion and similar fuses (superseding IS:5792)
5 Sep 2012IS 9385(Part 3):1980
| IEC 282-2(1970)
High voltage fuses:Part 3 Application guide for high voltage fuses
6 Sep 2012IS 9385(Part 4):1983 High voltage fuses:Part 4 Determination of short-circuit power factor for testing of high voltage fuses
7 Mar 2011IS 9385(Part 5):1983
| IEC 282-1A(1978)
High voltage fuses:Part 5 Types and dimensions of fuse-links for current limiting fuses
8 Sep 2012IS 9402:1980
| IEC 549(1976)
High voltage fuses for the external protection of shunt power capacitors
9 Mar 2011IS 9926:1981 Fuse wires used in rewirable type electric fuses upto 650 volts
10 Mar 2011IS 10624:1983
| IEC 644(1979)
High voltage fuse-links for motor circuit applications
11 Sep 2012IS 12534:1988 Application guide for the selection of high voltage fuses for transformer circuit applications
12 Mar 2009IS 13703(Part 1):1993
/ IEC 60269-1(1986)
Low voltage Fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 1 General requirements [superseding IS 9224 (Part 1):1979]
13 Mar 2009IS 13703(Part 2/Sec 1):1993
/ IEC 60269-2(1986)
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 1 Supplementary requirements [superseding IS 9224 (Part 2):1979]
14 Mar 2009IS 13703(Part 2/Sec 2):1993
/ IEC 60269-2-1(1987)
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 2 Examples of standardized fuses
112
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
15 Mar 2009IS 13703(Part 4):1993
/ IEC 60269-4(1986)
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 4 Supplementary requirements for fuse- links for the protectlon of semiconductor devices [superceding IS 9224 (Part 4):1980]
16 Mar 2009IS 60127(Part 1):2006
/ IEC 60127-1(2006)
Miniture fuses: Part 1 Definitions for miniature fuses and general requirements for miniature fuse links(first revision)
17 Jun 2009IS 60127(Part 2):2003
/ IS/IEC 60127-2:2003
Ministure fuses : Part 2 Cartridge fuse links (First Revision)
18 Mar 2009IS 60127(Part 4):2005
/ IEC 60127-4(2005)
Miniature fuses: Part 4 Universal modular fuse Link (UMF)
19 Feb 2011IS 60127(Part 5):1988 Miniature fuses: Part 5 Guidelines for quality assessment of miniature fuse-links
20 Sep 2012IS 60127(Part 6):1994
/ IEC 60127-6:1994
Miniature fuses: Part 6 Fuse holders for miniature cartridge fuse links
21 Sep 2012IS 60691:1993
/ IEC 60691:1993
Thermal links - requirements and application guide
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 39(6159) Thermal links - Requirements and application guide IEC 60691:2002 (Superseding IS/IEC 691:1993)
2 DOC.ETD 39(6164) High - voltage fuses - Part 2: Expulsion fuses IEC 60282-2 : 2008 (Superseding IS 9385 (Part 2) ;1980
3 DOC.ETD 39(6426)
/ IEC 60269-2 : 2006
Low voltage fuses : Part 2 Supplementary requirements for fuses for use by authorized (fuses mainly for industrial application) Examples of standardized systems of fuses A to J (Superseding IS 13703(Part 2/Sec2)
4 DOC.ETD 39(6427)
/ IEC 60269-3:2006
Low voltage fuses - Part 3: Supplementary requirements for fuse for use by unskilled persons (fuses mainly for household and similar applications) Example of standardized systems of fuses A to F
5 DOC.ETD 39(6428)
/ IEC 60269-4 : 2009
Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
6 DOC.ETD 39(6429)
/ IEC 60269-5 : 2010
Low-voltage fuses. Part 5: Guidance for the application of low-voltage fuses
7 DOC.ETD 39(6430)
/ IEC 60269-6 : 2010
Low-voltage fuses – Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
8 DOC.ETD 39(6431)
/ IEC 60282-1 : 2009
High-voltage fuses. Part 1: Current-limiting fuses
113
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 40 HVDC POWER SYSTEMS
To prepare standards and guidelines on equipment and performance of high- voltage d.c(HVDC) Transmission Systems
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 Dec 2010IS 2165(Part 5):2005
/ IEC 60071-5:2002
Insulation coordination:Part 5 Procedures for high- voltage direct current (HVDC) converter stations
2 Jun 2010IS 14801:2000
/ IEC 60633(1998)
Terminology for high voltage direct current ( HVDC ) transmission.
3 Jan 2011IS 14902(Part 1):2001
/ IEC 60919-1(1988)
Performance of high-voltage d.c (HVDC) systems :Part 1 Steady state conditions.
4 Jan 2011IS 14902(Part 2):2001
/ IEC 60919-2(1991)
Performance of high-voltage d.c (HVDC) systems :Part 2 Faults and switching.
5 Dec 2010IS 14902(Part 3):2005
/ IEC 60919-3:1999
Performance of high -voltage direct current (HVDC) systems:Part 3 Dynamic conditions
6 Jan 2011IS 14911(Part 1):2001
/ IE 60700-1(1998)
Thyristor valves for high-voltage direct current (HVDC) power transmission: Part 1 Electrial Testing
7 Dec 2010IS 15597:2005
/ IEC 61803:1999
Determination of power losses in high voltage direct current (HVDC) converter stations
8 Dec 2010IS 15617:2005
/ IEC 61954:2003
Power electronics for electrical transmission and distribution systems-Testing of thyristor valves for static var compensations
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 40(6313) Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 1: Steady-state conditions’ [First Revision of IS 14902 (Part 1)] [IEC 60619-1(2010)]
2 DOC.ETD 40(6314) Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 2: Faults and switching [First Revision of IS 14902 (Part 2)] IEC (60619-2:2008)
3 DOC.ETD 40(6315) Performance of high-voltage direct current (HVDC) Systems with line-commutated converters – Part 3: Dynamic conditions [First Revision of IS 14902 (Part 3)] (IEC 60619-3:2009)
4 DOC.ETD 40(6316) High-voltage direct current (HVDC) installations – system tests (IEC 61975:2010)
5 DOC.ETD 40(6317) High-voltage direct current (HVDC) systems – Guidebook to the specification and design evaluation of a.c. filters (IEC 62001:2009)
6 DOC.ETD 40(6318) Voltage sourced converter (VSC) Valves for high-voltage direct current (HVDC) Power transmission – electrical testing (IEC 62501:2009)
114
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 42 WIND TURBINES
To prepare Indian standards for wind turbines that convert wind energy into electrical energy. These standards addressdesign requirements, engineering integrity, measurement techniques and test procedures. Their purpose is to provide a basis for design, quality assurance and certification. The standards are concerned with all subsystems of wind turbines, such as mechanical and internal electrical systems, support structures and control and protection systems. They are intended to be used together with appropriate Indian Stanfdards.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.ETD 42(6422) Wind turbines – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines [IEC 61400-21:]
2 DOC.ETD 42(6423) Wind turbines – Part 24: Lightning protection [IEC 61400-24:]
3 DOC.ETD 42(6424) Electrotechnical Vocabulary – Part 415: Wind Turbine Generator Systems [IEC 60050-415:1999]
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 42(6421) Wind turbines – Part 13: Measurement of mechanical loads IEC 60014-13:2001
115
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
SCOPE -
ETD 43 Standardization of environmental aspects for electrical and electronic products
To prepare the necessary guidelines, basic standards, in the environmental area, in close cooperation with product committees, which remain autonomous in dealing with the environmental aspects relevant to their products; To liaise with product committees in the elaboration of environmental requirements of product standards in order to foster common technical approaches and solutions for similar problems and thus assure consistency in standards.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
FINALISED DRAFTS UNDER PRINT
1 DOC.ETD 43(6327) Environmentally conscious design for electrical and electronic products [IEC 62430(2009)]
2 DOC.ETD 43(6328) Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products’ [IEC 62476(2010)]
3 DOC.ETD 43(6329) Environmental Information on Electrical and Electronic Equipment (EIEEE) [IEC/PAS 62545:2008]
4 DOC.ETD 43(6330) Electrotechnical Products – Determination of Restricted Substances – Sampling Procedure – Guidelines [IEC/PAS 62596:2009]
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.ETD 43(6628) Determination of certain substances in electrotechnical products – Part 1: Introduction and overview [IEC 62321(2008)]
2 DOC.ETD 43(6629) Determination of certain substances in electrotechnical products – Part 2: Disassembly, disjointment and mechanical sample preparation [IEC 62321-2(2013)]
3 DOC.ETD 43(6630) Determination of certain substances in electrotechnical products – Part 3-1: Screening – lead, mercury, cadmium, total chromium and total bromine using x-ray fluorescence spectrometry [IEC 62321-3-1(2013)]
4 DOC.ETD 43(6631) Determination of certain substances in electrotechnical products – Part 3-2: Screening – total bromine in polymers and electronics by combustion – ion chromatography (c-ic) [IEC 62321-3-2(2013)]
5 DOC.ETD 43(6632) Determination of certain substances in electrotechnical products – Part 4: Mercury in polymers, metals and electronics by cv-aas, cv-afs, icp-oes and icp-ms [IEC 62321-4(2013)]
6 DOC.ETD 43(6633) Determination of certain substances in electrotechnical products – Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by aas, afs, icp-oes and icp-ms [IEC 62321-5(2013)]
116
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
STANDARDS WITHDRAWN / SUPERSEDED
ANNEX 1
Sl. No. IS Number/ DOC Number Title
1 DOC.ETD 29(6201) A,C motor capacitors - Part 1 : General - performance, testing and rating - Motor start capacitors safety requirements - Guide for installation and operation (third revision of IS 2993) (IEC 60252-1-2001)
2 SP 39 : 1987 Special publication-Guide for insulation coordination within low voltage systems
3 SP 48 : 1991 Guide for requirements and testing of electric irons
4 SP 49 : 1991 Guide for requirements and testing of electric immersion water heaters
5 SP 50 : 1991 Guide for requirements and testing of electric radiators
6 SP 51 : 1991 Guide for requirements and testing of electric stoves
7 DOC.ETD 29(6197) A,C motor capacitors - Part 2: Motor start capacitors (third revision of IS 2993) (IEC 60252-2-2003)
8 IS 13:1949 Methods for grading processed mica (tentative) (withdrawn)
9 IS 14:1949 Classification of processed muscovite mica (tentative) (withdrawn)
10 IS 203:1984 Dry batteries for flashlights (fourth revision)
11 IS 267:1976 Inert cells (third revision)
12 IS 268:1976 Leclanche type sack cells (second revision)
13 IS 282:1982 Hard-drawn copper conductors for overhead power transmission (second revision)
14 IS 302(Part 2/Sec 205):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 205 Steam irons
15 IS 350:1968 Organic, baking, impregnating, insulating varnishes for electrical purposes (first revision) (with Amendments No. 1 to 3)
16 IS 351:1952 Insulated varnish, baking, bitumen type (with Amendments No. 1 and 2)- (withdrawn)
17 IS 352:1973 Air-drying insulating varnishes for electrical purposes (first revision )-(withdrawn)
18 IS 353:1952 Insulating varnish, non-alcoholic, clear, air-drying (withdrawn)
19 IS 370:1954 Reversible type two-pin plugs and socket-outlets without earthing connections (tentative) (withdrawn)
20 IS 375:1963 Marking and arrangement for switchgeasr bus-bars, main connections and auxiliary wiring (revised)(superseded by IS: 5578 and IS:11353)
21 IS 395:1962 Lead-acid storage battery for motor vehicles (superseded by IS: 7372)
22 IS 396:1953 Bare annealed high-conductivity copper wire for electrical machinery and apparatus (tentative) (withdrawn)
23 IS 434(Part 1):1964 Rubber-insulated cables: Part 1 With copper conductor (revised) (superseded by IS: 9968)
24 IS 434(Part 2):1964 Rubber-insulated cables: Part 2 With aluminium conductors (revised) (supersededby IS: 9968)
25 IS 449:1962 Enamelled high-conductivity annealed round copper wire (oleoresinous enamel) (revised) (withdrawn)
#Error
Sl. No. IS Number/ DOC Number Title
26 IS 450:1964 Cotton covered round copper conductors (revised) [superseded by IS 7391(Part 1)]
27 IS 541:1954 Stationary, accumulators, lead-acid type (superseded by IS: 1651 and IS: 1652)
28 IS 556:1960 Leclanche type radio batteries (withdrawn)
29 IS 585:1962 Voltages and frequency for transmission and distribution systems (revised) (Amendments No. 1 to 5) (superseded by IS:12360-1988)
30 IS 691:1984 Flexible trailing cables for use in coal mines (first revision)
31 IS 693:1965 Varnished cambric insulated cables (revised) (with Amendments No. 1 to 5) (withdrawn)
32 IS 722(Part 2):1977 AC electricity meters:Part 2 Single-phase whole-current watt hour meters, Class2 (first revision)
33 IS 722(Part 3):1988 AC electricity meters: Part 3 Three-phase whole current and transformer operated and single-phase transformer operated watt-hour meters, class 2(second revision)
34 IS 722(Part 5):1980 AC electricity meters: Part 5 Volt-ampere hour meters for restricted power factor range, class 3.5 (first revision)
35 IS 722(Part 6):1980 AC electricity meters: Part 6 Var-hour meters, class 2.5 (first revision)
36 IS 722(Part 7/Sec 1):1987
AC electricity meters: Part 7 Volt-ampere hour meters for full power factor range, Section 1 General requirements (first revision)
37 IS 722(Part 7/Sec 2):1987
AC electricity meters: Part 7 Volt-ampere hour meters for full power factor range, Section 2 Vector sum VAh meters (first revision)
38 IS 722(Part 7/Sec 3):1987
AC electricity meters: Part 7 Volt-ampere hour meters for full power factor range, Section 3 Arithmatic sum VAh meters (first revision)
39 IS 722(Part 8):1972 AC electricity meters: Part 8 Single-phase 2-wire whole current watthour meter (class 1.0)
40 IS 722(Part 9):1972 AC electricity meters: Part 9 Three-phase whole current and transformer operated watthour meters and single-phase two-wire transformer operated watthour meters (class 1.0)
41 IS 985:1962 Lead-acid storage batteries for motor vehicles (special) (revised) (supersded by IS:7372)
42 IS 1025:1957 Glossary of terms for primary cells and batteries [superseded by IS: 1885 (Part15)
43 IS 1026:1984 Flexible trailing cables for use in quarries and metalliferous mines (first revision)
44 IS 1027:1968 Paper insulated cables for use in mines (superseded by IS: 692)
45 IS 1087:1957 Single pole 5-ampere tumbler switches for AC/DC (withdrawn)
46 IS 1119:1957 Reversible protected type two-pin plugs and sockets with earthing connections (withdrawn)
47 IS 1147:1957 Glossary of terms for secondary cells and batteries [superseded by IS: 1885 (Part 8)]
48 IS 1174:1957 Definitions for mica terms [superseded by IS:1885(Part 53)]
49 IS 1336:1959 Recommendations for the colour of push-buttons [superseded by IS: 6875 (Part 2)]
50 IS 1416:1972 Safety transformers (first revision)
51 IS 1496:1959 Transformers used in vibrator power supplies (withdrawn)
#Error
Sl. No. IS Number/ DOC Number Title
52 IS 1565:1966 Electrical apparatus comprising resistors (revised) (superseded by IS:10659 andIS:11067)
53 IS 1567:1960 Metal-clad switches(current rating not exceeding 100 amperes); (superseded by IS:2607 and IS:4064)
54 IS 1591:1960 Glossary of terms for cables, conductors and accessories [superseded by IS:1885(Part 32)]
55 IS 1594:1960 Metric sizes of copper wires and conductors for electrical purposes (withdrawn)
56 IS 1595:1967 Enamelled round copper wire with high mechanical properties (withdrawn)
57 IS 1596:1977 Polyethylene insulated cables for working voltages upto and including 1100 V (second revision) (withdrawn)
58 IS 1653:1972 Rigid steel conduits for electrical wiring (second revision) (withdrawn){Superseded by IS 9537(Part 2)}
59 IS 1666:1961 Paper-covered rectangular copper conductors for transformer windings [superseded by IS:7404(Part 2)]
60 IS 1753:1967 Aluminium conductors for insulated cables (first revision) (withdrawn) (see IS:8130)
61 IS 1777:1978 Industrial luminaires with metal reflectors (first revision)
62 IS 1818:1972 Alternating current isolators (disconnectors) and earthing swithces (first revision) (Amendments No. 1 and 2) (withdrawn)
63 IS 1822:1967 AC motor starters of voltage not exceeding 1000 volts [(first revision)- (withdrawn)]
64 IS 1846:1992 Lead-acid aircraft batteries (aerobatic and non-aerobatic) (first revision)
65 IS 1860:1980 Code of Practice for installation, operation and maintennannce of electric passenger and goods lifts (first revision)
66 IS 1885(Part 8):1986 Electrotechnical vocabulary: Part 8 Secondary cells and batteries (first revision) (superseding IS:1174)
67 IS 1885(Part 73/Sec 1):1993
Electrotechnical vocabulary: Part 73 Physics and Chemistry, Section 1 Physical concepts
68 IS 1885(Part 73/Sec 2):1993
Electrotechnical Vocabulary: Part 73 Physics and chemistry, Section 2 Electrotechnical concepts
69 IS 1885(Part 73/Sec 3):1993
Electrotechnical Vocabulary: Part 73 Physics and chemistry, Section 03 Concepts related to quantities and units
70 IS 1886:1961 Code of practice for installation and maintenance of transformers (first revision) [superseded by IS:10028(Part 2 and 3)
71 IS 1913(Part 1):1978 General and safety requirements for luminaires:Part 1 Tubular fluorescent lamps (second revision)
72 IS 1947:1980 Flood lights (first revision) (withdrawn)
73 IS 1951:1961 Polyvinylchloride sleeving for electrical purpose
74 IS 2032(Part 1):1962 Graphical symbols used in electrotechnology: Part 1 Classification and definitions of diagrams and charts [superseded by IS:8270(Part 1)]
75 IS 2032(Part 2):1962 Graphical symbols used in electrotechnology: Part 2 Kind of current distribution systems and methods of connection (withdrawn)
76 IS 2032(Part 3):1962 Graphical symbols used in electrotechnology: Part 3 Circuit elements and variability (withdrawn)
#Error
Sl. No. IS Number/ DOC Number Title
77 IS 2032(Part 4):1964 Graphical Symbols used in electrotechnolgy: Part 4 Rotating machines and transformers [superseded by IS 2032(Part 26) and IS 2032 (Part 28)]
78 IS 2032(Part 5):1965 Graphical symbols used in electrotechnology: Part 5 Generating stations and substations (withdrawn)
79 IS 2032(Part 6):1965 Graphical symbols used in electrotechnology: Part 6 Motor starters (withdrawn)
80 IS 2032(Part 7):1974 Graphical symbols used in electrotechnology: Part 7 Switchgear and auxiliaries(first revision) (withdrawn)
81 IS 2032(Part 10):1969 Graphical symbols used in electrotechnology: Part 10 Measuring instruments (withdrawn)
82 IS 2032(Part 11):1969 Graphical symbols used in electrotechnology: Part 11 Electrical installations in buildings (withdrawn)
83 IS 2032(Part 18):1976 Graphical symbols used in electrotechnology: Part 18 Symbols and connection diagrams for integrating meters (withdrawn)
84 IS 2032(Part 21):1977 Graphical symbols used in electrotechnology: Part 21 Electrical welding equipment (withdrawn)
85 IS 2032(Part 22):1978 Graphical symbols used in electrotechnology: Part 22 Instrument transformers (withdrawn)
86 IS 2032(Part 23):1978 Graphical symbols used in electrotechnology: Part 23 Instruments for process measurement and control (withdrawn)
87 IS 2032(Part 26):1982 Graphical symbols used in electrotechnology: Part 26 Rotating machines (withdrawn)
88 IS 2032(Part 27):1982 Graphical symbols used in electrotechnology: Part 27 Relays (withdrawn)
89 IS 2032(Part 28):1983 Graphical symbols used in electrotechnology: Part 28 Transformers (withdrawn)
90 IS 2068:1962 Cotton covered rectangular copper conductors [superseded by IS: 7391 (Part 2)]
91 IS 2070:1962 Methods of impulse voltage testing(superseded by IS:2071)
92 IS 2071(Part 2):1974 Methods of high voltage testing: Part 2 Test procedures (first revision)
93 IS 2120:1963 15-ampere tumbler switches (revised) (with amendments No. 1 and 2) (superseded by IS: 3854)
94 IS 2147:1962 Degrees of protection provided by enclosuresfor low voltage switchgear and controlgear[(superseded by IS 13947: (Part 1):1993]
95 IS 2148:2004 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures "d" (third revision)
96 IS 2149:1970 Luminaires for street lighting (first revision) (withdrawn)[Superseded by IS 10322 (Part 5/Section 3)]
97 IS 2183:1973 Schedule for high pressure mercury vapour lamps (first revision) with Amendment No. 1) [superseded by IS:9900(Part 1) to (Part 4)
98 IS 2188:1962 Methods of test for paper for electrical purposes (withdrawn)
99 IS 2206(Part 1):1984 Flameproof electric lighting fittings: Part 1 Well-glass and bulkhead types (first revision)
100 IS 2206(Part 2):1976 Flameproof electric lighting fittings:Part 2 Fittings using glass tubes
#Error
Sl. No. IS Number/ DOC Number Title
101 IS 2206(Part 3):1989 Flameproof electric lighting fittings:Part 3 Fittings using plastic tubes (Group I only)
102 IS 2206(Part 4):1987 Flameproof electric lighting fittings:Part 4 Portable flameproof hand lamps
103 IS 2208:1962 HRC cartridge fuse links for voltage above 650 volts [(superseded by IS:9224(Part 2)]
104 IS 2274:1963 Code of practice for electrical wiring installations (system voltage exceeding 650 volts) (superseded by IS:732)
105 IS 2448(Part 2):1968 Adhesive insulating tapes for electrical purposes: Part 2 Tapes with PVC substrates (Amendment No.1 to 3)- (withdrawn)
106 IS 2493:1963 Well glass lighting fittings for use underground in mines (non-flameproof types)(withdrawn)
107 IS 2509:1973 Rigid non-metallic conduits for electrical installations (first revision) (withdrawn) (superseded by IS 9537(Part 3)
108 IS 2516(Part 1/Sec 2):1980
Circuit-breakers: Part 1 General and definitions, Section 2 For voltages above 1000V ac (first revision) (Superseded by IS 13118:1991)
109 IS 2516(Part 1/Sec 3):1972
Circuit breakers: Part 1 General and definitions, Section 3 Voltages above 11 kV
110 IS 2516(Part 2/Sec 2):1980
Circuit breakers: Part 2 Rating, Section 2 For voltages above 1 000 V ac (first revision) (Superseded by IS 13118:1991)
111 IS 2516(Part 3/Sec 2):1980
Circuit breakers : Part 3 Design and construction, Section 2 for Voltages above1 000 V ac (first revision) (Superseded by IS 13118:1991)
112 IS 2516(Part 4/Sec 2):1980
Circuit breakers: Part 4 Type tests and routine tests, Section 2 For voltages above 1 000 V ac (first revision) (superseded by IS 13118:1991)
113 IS 2516(Part 5/Sec 2):1980
Circuit breakers: Part 5 Information to be given with enquiries tenders and orders and rules for transport erection and maintenance, Section 2 For volages above 1 000 V ac (first revision) (superseded by IS 13118:1991)
114 IS 2516(Part 1&2/Sec 1):1985
Circuit breakers: Part 1 & 2 Requirements and tests: Section 1 Voltages not exceedding 1 000 V ac or 1 200 V dc (second revision) [superseded by IS 13947(Part 2):1993]
115 IS 2576:1975 Dry batteries for transistor radio receivers (first revision)
116 IS 2607:1967 Air-break isolators for voltages not exceeding 1 000 volts (first revision) (superseded by IS:4064)
117 IS 2659:1964 Enamelled round copper wire for elevated temperatures (withdrawn)
118 IS 2667:1988 Fittings for rigid steel conduits for electrical wiring (first revision) [Superseded by IS 14768(Part 2):2003]
119 IS 2834:1998 Shunt capacitors for power systems (second revision){uperseded by IS 13925(Part 1)}
120 IS 2889:1964 Drums for trolley and contact wire (withdrawn)
121 IS 2959:1985 Contactors for voltages not exceeding 1 000 V ac or 1 200 V dc (first revision)[superseded by IS 13947 (Part 4/Section 1)]
122 IS 2982:1965 Copper conductors in insulated cables and cords (withdrawn) (see IS:8130)
123 IS 3003(Part 1):1977 Carbon brushes for electrical machines: Part 1 Definitions and nomenclature (first revision)
124 IS 3003(Part 2):1977 Carbon brushes for electrical machines: Part 2 Test methods for brush materials(first revision) (superseded by IS 13584:1992)
#Error
Sl. No. IS Number/ DOC Number Title
125 IS 3003(Part 3):1978 Carbon brushes for electrical machines: Part 3 Dimensions and requirements (first revision) (Superseded by IS 13466:1992)
126 IS 3003(Part 4):1978 Carbon brushes for electrical machines: Part 4 Dimensions of chamfers, bevels and terminations (first revision) (Superseded by IS 13466:1992)
127 IS 3035(Part 1):1965 Thermoplastic insulated weatherproof cables: Part 1 PVC insulated and PVC sheathed (amalgamated with IS:694) (withdrawn)
128 IS 3035(Part 2):1965 Thermoplastic insulated weatherproof cables: Part 2 Polyethylene insulated, taped or untaped, braided and compounded (withdrawn)
129 IS 3035(Part 3):1967 Thermoplastic insulated weatherproof cables: Part 3 Polyethlene sheathed (amalgamated with IS:1596) (withdrawn)
130 IS 3070(Part 1):1985 Lightning arresters for alternating current systems: Part 1 Non-linear resistor type lightning arresters (second revision){Superseded by IS 15086(Part 1)}
131 IS 3070(Part 2):1966 Expulsion type lightning arresters (Amendment No. 1) (withdrawn)
132 IS 3072:1975 Code of practice for installation and maintenance of switchgear[(first revision)-(withdrawn)]
133 IS 3106:1966 Code of practice for selection, installation maintenance of fuses [(voltage not exceeding 650 volts)- (withdrawn)]
134 IS 3107:1974 Portable multi purpose direct acting electrical indicating instruments (first revision)
135 IS 3202:1965 Code of practice for climate proofing of electrical equipment (withdrawn)
136 IS 3287:1965 Industrial lighting fittings with plastic reflectors
137 IS 3347(Part 6/Sec 1):1977
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 6 72.5 kV bushings, Section 1 Porcelain parts
138 IS 3347(Part 6/Sec 2):1982
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 6 72.5 kV bushings, Section 2 Metal parts
139 IS 3347(Part 7/Sec 1):1977
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 7 123 kV bushings, Section 1 Porcelain parts
140 IS 3347(Part 7/Sec 2):1982
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 7 123 kV bushings, Section 2 Metal parts
141 IS 3454:1966 Paper-covered round copper conductors [superseded by IS:7404 (Part 1)]
142 IS 3482:1966 Electric saucepans (withdrawn)
143 IS 3514:1966 Electric coffee percolators (non-regulator t ype) (Superseded by IS 14144:1994)
144 IS 3534:1976 Outline dimensions of electric lifts (first revision)
145 IS 3765:1966 Varnish impregnated cotton sleevings for electrical purposes
146 IS 3855(Part 1):1978 Rectangular and square enamelled copper conductors: Part 1 Thickness of enamel coating (first revision)
147 IS 3855(Part 2):1979 Rectngular and square enamelled copper condutors: Part 2 Methods of tests (first revision)
148 IS 3855(Part 3):1978 Rectangular and square enamelled copper conductors: Part 3 Wires with high mechanical properties (first revision)
149 IS 3855(Part 4):1981 Rectangular and square enamelled copper conductors: Part 4 Wires with temperature index 155 (first revision)
150 IS 3855(Part 5):1984 Rectangular and square enamelled copper conductors: Part 5 Wires with temperature index 180 (first revision)
#Error
Sl. No. IS Number/ DOC Number Title
151 IS 3914:1967 Code of practice for selection of ac induction motor starters [(voltage not exceding 1 000 volts- (withdrawn)]
152 IS 3961(Part 4):1968 Recommended current ratings for cables: Part 4 Polyethylene insulated cables
153 IS 4004:1985 Application guide for non-linear resistor type surge arresters for alternating current system (first revision){ Superseded by IS 15086(Part 5)}
154 IS 4012:1967 Dust-proof electric lighting fittings
155 IS 4013:1967 Dust-tight electric lighting fittings
156 IS 4047:1967 Heavy duty air-break switches andcomposite units of air-break switches andfuses for voltages not exceeding 1000 volts (superseded by IS:4064)
157 IS 4064(Part 1):1978 Air-break switches, air break disconnectors, air-break switch disconnectors andfuse-combination units for voltages not exceeding 1000V ac or 1200V dc:Part 1 General requirements (revised)[superseded by IS 13947 (Part 3):1993]
158 IS 4064(Part 2):1978 Air-break switches,air-break disconnectors,air-break switch disconnectors and fuse-combination units for voltages not exceeding 1000 V ac or 1200V dc: Part 2 Specific requirements for the direct switching of individual motors(withdrawn)
159 IS 4237:1982 General requirements for switchgear and controlgear for voltages not exceeding1 000 volts ac or 1 200 volts dc (first revision) [superseded by IS 13947(Part 1):1993]
160 IS 4268:1992 Air depolarized primary wet cells (second revision)
161 IS 4288:1988 PVC insulated (heavy duty) electric cables with solid aluminium conductors for voltages upto and including 1100 V (second revision) (withdrawn)
162 IS 4615:1968 Switch- socket outlets (non-interlocking type)( Withdrawn)
163 IS 4666:1980 Electric passenger and goods lifts (first revision)
164 IS 4685(Part 2):1984 Varnish bonded glass-fibre covered copper conductors: Part 2 Rectangular conductors (first revision)
165 IS 4691:1985 Degrees of protection provided by enclosure for rotating electrical machines (first revision) (withdrawn)
166 IS 4710:1968 Switches and switch-isolators above 1000 V but not exceeding 11000 V (Amendment No. 1) (withdrawn)
167 IS 4718:1968 Multiple paper-covered round copper conductors [superseeds IS:7404 (Part 1)]
168 IS 4722:2001 Rotating electrical machines (second revision) (withdrawn)
169 IS 4728:1975 Terminal marking and direction of rotation for rotating electrical machinery (first revision) (withdrawn)
170 IS 4729:1975 Measurement and evaluation of vibration of rotating electrical machines (Superseded by IS 12075:1987))
171 IS 4800(Part 1):1968 Enamelled round winding wires: Part 1 Conductors data
172 IS 4800(Part 2):1968 Enamelled round winding wires: Part 2 Maximum overall diameters
173 IS 4800(Part 3):1968 Enamelled round winding wires: Part 3 Methods of tests
#Error
Sl. No. IS Number/ DOC Number Title
174 IS 4800(Part 4):1968 Enamelled round winding wires: Part 4 Wires with high mechanical properties [superseeds IS 13730(Part 1):1993/IEC 317-1(1880)]
175 IS 4800(Part 5):1968 Enamelled round winding wires: Part 5 Wires for elevated temperatures (superseeding IS:2659)
176 IS 4800(Part 6):1968 Enamelled round winding wires: Part 6 Wires with self-fluxing properties [uperseeds IS 13730(Part 4):1993/IEC 317-4(1990)]
177 IS 4800(Part 7):1970 Enamelled round winding wires: Part 7 Wires with good dielectric properties under humid conditions [superseeds IS 13730(Part 6):1994]
178 IS 4800(Part 8):1970 Enamelled round winding wires: Part 8 Wires for use in refrigeration systems
179 IS 4800(Part 9):1971 Enamelled round winding wires: Part 9 Wires with temperature index 180
180 IS 4800(Part 10):1977 Enamelled round winding wires: Part 10 Self bonding wires
181 IS 4800(Part 11):1981 Enamelled round winding wires: Part 11 Wires with temperature index 220 [superseeds IS 13730(Part 7):1993/IEC 317-7(1990)]
182 IS 4800(Part 12):1986 Enamelled round winding wires; Part 12 Self bonding wires heat or solvent bonding enamelled round copper wires with temperature index 155
183 IS 4800(Part 13):1989 Enamelled round winding wires: Part 13 Dual coated wires with temperature index200
184 IS 4800(Part 14):1991 Enamelled round winding wires: Part 14 Wires with temperature index 155 [superseeded by IS 13730(Part 20):1993/IEC 317-20(1990)]
185 IS 4817:1968 Rubber-insulated cables for mines (with amendments No. 1 and 2) (withdrawn)
186 IS 4821:1968 Cable glands and cable sealing boxes for use in mines
187 IS 4850:1968 Application guide for expulsion-type lightning arresters (withdrawn)
188 IS 4949:1968 2 Amp switches for domestic and similar purposes(Superseded by IS 3854)
189 IS 5124:1969 Code of practice for installation and maintenance of ac induction motor starters [(voltage not exceeding 1 000 V)-(withdrawn)]
190 IS 5133(Part 1):1969 Boxes for enclosure of the electrical accessories:Part 1 Steel and cast iron boxes(Superseded by IS 14772)
191 IS 5133(Part 2):1969 Boxes for the enclosure of electrical accessories:Part 2 Boxes made of insulating material (Superseded by IS 14772)
192 IS 5160:1969 Mains-operated synchronous clocks (Superseded by IS 14145:1994)
193 IS 5424:1969 Rubber mats for electrical purpose (Superseded by IS 15652:2006)
194 IS 5728:1970 Guide for short-circuit calculations (Superseded by IS 13234:1991)
195 IS 5755:1970 Mineral insulated aluminium sheathed cables with aluminium conductors (withdrawn)
196 IS 5780:2002 Electrical apparatus for explosive gas atmospheres - Intrinsic safety 'l' (second revision)
197 IS 5792:1970 High voltage expulsion and similar fuses (superseded by IS:9385(Part 3)
198 IS 5833:1970 Flameproof air-break electrically operated gate-end boxes
199 IS 5868:2000 Polyvinyl chloride insulated cables for rated voltages upto and including 450/750 V : Part 3 Sheathed single and multiore for fixed and flexible wiring (fourth revision of IS 694)
200 IS 5908:1970 Method of measurement of electrical installations in buildings (withdrawn)
#Error
Sl. No. IS Number/ DOC Number Title
201 IS 5959(Part 1):1970 Polyethylene insulated and PVC sheathed (heavy duty) electric cables (Part 1) For working voltages up to and including 1100 volts (withdrawn)
202 IS 5959(Part 2):1970 Polythylene insulated and PVC sheathed (heavy duty) electric cables (Part 2) For working voltages from 3.3 kV up to and including 11 kV (withdrawn)
203 IS 5987:1970 Code of practice for selection of switches [(voltage not exceeding 1000 V)-(withdrawn)]
204 IS 6160:1971 Rectangular conductors for electrical machines
205 IS 6209:1982 Methods for partial discharge measurement (first revision)
206 IS 6381:2004 Electrical apparatus for explosive gas atmospheres - Increased safety "e" (first revision)
207 IS 6383:1971 Electric service lifts
208 IS 6390(Part 1):1983 Domestic electric clothes washing machines (first revision) (Superceded by IS 14155:1994)
209 IS 6390(Part 3):1992 Domestic electrical clothes washing machines: Part 3 Requirements for spin extractors (Superseded by IS 14155:1994)
210 IS 6474:1984 Polyethylene insulation and sheath of electric cables (first revision)
211 IS 6538:1971 Three-pin plugs made of resilient material (Withdrawn)
212 IS 6539:1972 Intrinsically safe magneto telephones for use in hazardous atmospheres
213 IS 6585:1972 Screwless terminal and electrical connections for lighting fittings [supersededby IS:10322(Part 3)]
214 IS 6620:1972 Code of practice for installation, operation and maintenance of electric service lifts
215 IS 6648:1972 Carbon electrodes for dry cells and batteries
216 IS 6789:1972 Bolted flameproof cable coupler and adaptors
217 IS 6875(Part 1):1973 Control switches(switching devices for control and auxiliary circuits includingcontactor relays)for voltages upto and including 1000V ac & 1200V dc:Part 1 General requirements [superseded by IS 13947(Part 5/Section 1)]
218 IS 6875(Part 2):1973 Control switches(switching devices for control and auxiliary circuits including contactor relays)forvoltages upto and including 1000V ac and 1200V dc:Part 2Push-buttons and related control switches [Supresded by IS13947(Part 5/Section1)]
219 IS 6875(Part 3):1980 Control switches(switching devices for control and auxiliary circuits includingcontactor relays)for voltages upto and including 1 000 V ac and 1200 V dc :Part 3 Rotary control switches [superseded by IS 13947(Part 5/Section 1)]
220 IS 6946:1973 Flexible (pliable) non-metalic conduits for electrical installations [Superseded by IS 9537(Part 5)]
221 IS 7023:1973 Methods of tests for high pressure mercury vapour lamps [superseded by IS 9900 (Part 1) to (Part 4)]
222 IS 7153:1973 Domestic electric controls for household appliances (withdrawn)
223 IS 7218:1974 Dry batteries for hearing aids
224 IS 7253:1974 Dry batteries for photoflash equipment
#Error
Sl. No. IS Number/ DOC Number Title
225 IS 7389:2004 Pressurized enclosures of electrical equipment for use in hazardous area (second revision)(Superseded by IS/IEC 60079-2(2007)
226 IS 7389(Part 1):1976 Pressurized enclosures of eletrical apparatus for use in explosive atmospheres: Part 1 Pressurized enclosures with no internal source of flammable gas or vapour (first revision)
227 IS 7404(Part 2):1991 Paper covered copper conductors : Part 2 Rectangular conductors (first revision) (superseeding IS: 1666)
228 IS 7678:1975 Method of photometric testing of incandescent type luminaires for general lighting service
229 IS 7693:2004 Electrical apparatus for explosive gas atmospheres - Oil immersion "o" (first revision)
230 IS 7724:2004 Electrical Apparatus for explosive gas atmospheres - Powder filling 'q' (first revision) (Superseded by IS/IEC 60079-5(2007)
231 IS 7733:1975 Code of practice for electrical wiring installations in hospitals (withdrawn)
232 IS 7759:1975 Lift door locking devices and contacts
233 IS 7820:2004 Electrical apparatus for explosive gas atmospheres - Method of test for ignition temperatures (first revision)
234 IS 7987:1976 Guide for selection of high voltage ac circuit breakers (withdrawn)
235 IS 8224:1976 Electric lighting fittings for division 2 areas
236 IS 8239:1976 Classification of maximum surface temperatures of electrical equipment for use in explosive atmospheres (superseded by IS 13346:1992)
237 IS 8240:1976 Guide for electrical equipment for explosive atmosphere (superseded by IS 13346:1992)
238 IS 8241:1976 Method of marking for identifying electrical equipment for explosive atmospheres(superseded by IS 13346:1992)
239 IS 8264:1976 Air-drying and anti-tracking insulating varnishes for electrical purposes [superseded by IS 10026 (Part 3)]
240 IS 8289:1976 Electrical equipment with type of protection 'n'
241 IS 8544(Part 1):1977 Motor starters for voltages not exceeding 1 000 V:Part 1 Direction line ac starters[superseded by IS 13947 (Part 4/Section 1):1993]
242 IS 8544(Part 2):1977 Motor starters for voltages not exceeding 1 000 V : Part 2 Star-delta starters [superseded by IS 13947 (Part 4/Section 1):1993]
243 IS 8544(Part 3/Sec 1):1979
Motor starters for voltages not exceeding 1000 V :Part 3 Rheostatic motor starters,Section 1 General requirements[superseded by IS 13947 (Part 4/Section 1):1993]
244 IS 8544(Part 3/Sec 2):1979
Motor starters for voltages not exceeding 1 000 V: Part 3 Rheostatic motor starters,Section 2 Additional requirements for ac rheostatic motor controllers[superseded by IS 13947 (Part 4/Section 1):1993]
245 IS 8544(Part 4):1979 Motor starters for voltages not exceeding 1 000 V: Part 4 Reduced voltage ac starters: two step auto-transformer starters [superseded by IS 13947 (Part 4/Section 1);1993]
#Error
Sl. No. IS Number/ DOC Number Title
246 IS 8603(Part 2):1977 Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 2 24 kV buhsings
247 IS 8603(Part 3):1977 Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 3 36 kV bushings
248 IS 8724:1978 Dimensions of carrier and bases used in rewirable fuses [superseded by IS:2086]
249 IS 8783:1978 PVC insulated winding wires for submersible motors for 85 C operation
250 IS 8828:1996 Circuit-breakers for over current protection for household and similar installations (second revision)
251 IS 9046:1978 AC contactors of voltage above 1000 V upto and including 11000 V
252 IS 9080(Part 3):1979 Safety requirements in electro-heat installations:Part 3 Particular requirements for mains and medium frequency induction furnace installations (Superseded by IS/IEC 60519-3:1988)
253 IS 9166:1979 Spark test apparatus for intrinsically safe circuits
254 IS 9224(Part 1):1979 Low voltage fuses: Part 1 General requirements [superseded by IS 13703 (Part 1):1993]
255 IS 9224(Part 2):1979 Low voltage fuses: Part 2 Supplementary requirements for fuses for industrial applications (superseding IS:2208) [superseded by IS 13703 (part 2/Section 1):1993]
256 IS 9224(Part 4):1980 Low voltage fuses: Part 4 Supplementary requirements for fuse-links for the protection of semiconductor devices [superseded by IS 13703 (Part 4):1993]
257 IS 9299(Part 1):1979 Insulating materials based on built-up mica or treated mica paper: Part 1 Definitions and general requirements(Superseded by IS/IEC 60371-1:2003 )
258 IS 9299(Part 2):1992 Insulating materials based on built-up mica or treated mica paper: Part 2 Methods of test (first revision)(Superseded by IS/IEC 60371-2:2004 )
259 IS 9299(Part 3/Sec 1):1979
Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 1 Rigid mica material for commutator separators (Superseded by IS/IEC 60371-3-1:2006 )
260 IS 9299(Part 3/Sec 2):1982
Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 2 Moulding mica materials for electrical purposes (Superseded by IS/IEC 60371-3-9:1995 )
261 IS 9299(Part 3/Sec 3):1982
Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 3 Flexible mica flake tape for insulation of electrical machines (Superseded by IS/IEC 60371-3-5:2005 )
262 IS 9299(Part 3/Sec 4):1982
Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 4 Rigid mica materials for heating equipment (Superseded by IS/IEC 60371-3-3:1983 )
263 IS 9299(Part 3/Sec 5):1992
Insulating materials based on built up mica or treated mica paper: Part 3 Specification for individual materials, Section 5, Flexible mica materials in sheet form (Superseded by IS/IEC 60371-3-3:1983 )
264 IS 9299(Part 3/Sec 6):1993
Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 6 Glass backed mica paper with B-stage epoxy resin bond (Superseded by IS/IEC 60371-3-6:1992 )
#Error
Sl. No. IS Number/ DOC Number Title
265 IS 9299(Part 3/Sec 7):1992
Insulating materials based on built-up mica or treated mica paper: Part 3 Specification for individual material, Section 7 Mica paper (Superseded by IS/IEC 60371-3-2:2005 )
266 IS 9570:1980 Classification of flammable gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
267 IS 9628:1980 Three-phase induction motors with type of protection 'n'Superseded by IS/IEC 60079-15(2005)
268 IS 9735:2003 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures "d" Method of test for ascertainment of maximum experimental safe gap (first revision)
269 IS 9803:1981 Buffers for electric passenger and goods lifts
270 IS 9878:1981 Safety gears and governors for electric passenger and goods lifts
271 IS 10051:1981 PVC insulated winding wires for submersible motors for 105 degree centrigrade operation
272 IS 10114:1982 Enamelled and varnish bonded glass covered rectangular copper wires
273 IS 10191:1982 Car and counterweight guide rails, guide rail supports and fastenings for lifts
274 IS 10406:1983 Intrinsically safe transformers primarily for bell signalling circuits
275 IS 10448:1983 Retiring cam for electric passenger and goods lifts
276 IS 10452(Part 1):1983 Methods of tests for covered conductors for electrical equipment: Part 1 Paper covered and cotton covered conductors
277 IS 10452(Part 2):1983 Methods of tests for covered conductors for electrical equipment: Part 2 Fibrous covered conductors
278 IS 10542:1983 Safety requirements for refrigerators andfood freezers for household and similr purposes [Superceded by IS 302(Part 2/Sec 24):1994]
279 IS 10810(Part 18):1984 Methods of test for cables:Part 18 Colour fastness to day light
280 IS 10913:1984 Brakes for electric passenger and goods lifts
281 IS 11005:1984 Dust tight ignition proof enclosures of electrical equipment
282 IS 11039:1983 Requirements for mounting on rails in switchgear and controlgear installations (Sprseded by IS/IEC 60715:1981
283 IS 11349:1985 Oscilloscopes and peak voltmeters for impulse tests
284 IS 11426:1985 Specification for Alternating Current Precision Kilowatt-hour Meters of Glass 0.5 for Testing Purposes
285 IS 11576:1986 Barlow's wheel
286 IS 11599:1986 Portable ac clip-on-ammeters
287 IS 11615:1986 Car and counterweight guide shoes for electric passenger and goods lifts
288 IS 11633:1986 Lift doors
289 IS 11706:1986 General requirements of car-frame for electric passangers and goods lift
290 IS 12155:1987 General and safety requirements for fans and regulators for household and similar purposes
291 IS 12315(Part 1):1988 Methods of determining the minimum ignition temperature of dusts: Part 1 Dust layer on a heated surface at a constant temperature (Superseded by IS/IEC 61241-1(2000))
292 IS 12315(Part 2):1988 Methods of determining the minimum ignition temperature of dusts: Part 2 Dust cloud in a furnace at a constant temperature
#Error
Sl. No. IS Number/ DOC Number Title
293 IS 12661(Part 1):1988 High voltae motor-starter: Part 1 Direct-on-line(full voltage) ac starters
294 IS 12729:2004 Common specification for high voltage switchgear and controlgear standards (first revsion )
295 IS 12784(Part 1):1989 Electrical measuring transducers for converting ac electrical quantities into dc electrical quantities- specification Part 1 General purpose transducers
296 IS 12788:1989 PVC covered wires overcoated with nylon for submerssible motors
297 IS 12802:1989 Temperature rise measurement of rotating electrical machines (withdrawn)
298 IS 12819:1989 Transformer oil feed stock (TOFS) base stock (TOBS) (Withdrawn)
299 IS 12824:1989 Type of duty and classes of rating assigned to rotating electrical machines (withdrawn)
300 IS 12956:1990 Sealed cylindrical type rechargeable nickel cadmium cells (tentative standard withdrawn. Regular standrd being prepaired)
301 IS 12974:1990 Semiconductor contactors(Superceded by IS/IEC 60947-4-1:2000
302 IS 13118:1991 General requirements for circuit breakersfor voltages above 1 000 V (Superseding all Parts and Sections of IS 2516)
303 IS 13340:1993 Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 650 V
304 IS 13346:2004 Electrical apparatus for explosive gas atmospheres - General requirements(first revision)
305 IS 13408(Part 1):1992 Code of practice for the selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres(other than mining application or explosive processing manufacture): Part 1 General recommendations(Superseded by IS/IEC 61241-14(2004))
306 IS 13573:1992 Joints and terminations for polymeric cables for working voltages from 6.6 kV up to and including 33 kV - performance requirements and type tests
307 IS 13947(Part 1):2004 Low-voltage switchgear and controlgear:Part 1 General rules (superseding IS 2147 & 4237)
308 IS 13947(Part 2):1993 LV Switchgear and controlgear: Part 2 Circuit breakers (superseding IS 2516 & its parts)
309 IS 13947(Part 3):1993 Low-voltage switchgear and controlgear:Part 3 Switches, disconnectors,switch-disconnectorsand fuse combination unit (superseding IS 4064 (part 1 &2)
310 IS 13947(Part 4/Sec 1):1993
Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 2959 and 8544 (all parts)]
311 IS 13947(Part 5/Sec 1):2004
Low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (first revision){Superseding IS 6875 (All parts)}
312 IS 13985:1994 Terminology for tools and equipment to be used in live working(superceeded by IS 15416)
313 IS 14154(Part 1):1996 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts: Part 1 Specification for apparatus (Superseded by IS/IEC 61241-0(2004))
#Error
Sl. No. IS Number/ DOC Number Title
314 IS 14154(Part 2):1997 Electrical apparatus with protection by enclosure for use in presence of combustible dust: Part 2 Guide to selection, installation and maintenance (Superseded by IS/IEC 61241-14(2004))
315 IS 14390:1996 Var-hour meters, Class 3.0 [Superseding IS 722 (Part 6):1980]
316 IS 15451:2004 Electrical apparatus for explosive gas atmospheres - Encapsulation "m"
317 IS 60079(Part 20):1996 Electrical apparatus for explosive gas atmospheres : Part 20 Data for flammable gases and vapours relating to the use of electrical apparatus
#Error
ANNEX 2
EQUIVALENT STANDARDS/DOCUMENTS Sl. No. IS Number/ DOC Number Title ISO/IEC ----------------------------------------------------------------------------------------------------------------------------------------------------
DUAL NUMBER STANDARDS 1 IS 1271:2012 Electrical Insulation - Thermal IEC 60085:2007 Evaluation and designation (Second
2 IS 1401:2008 Protection of persons and equipment by IEC 61032 : 1997 enclosures - Probes for verification (second revision)
3 IS 1876:2005 Voltage measurement by means of IEC 60052:2002 standard air gaps(first revision)
4 IS 1885(Part 9):1992 Electrotechnical Vocabulary: Part 9 IEC 60050(446):1983 Electrical relays (second revision)
5 IS 1885(Part 10):2008 Electrotechnical Vocabulary: Part 10 IEC 60050(448):1995 Power system protection (second
6 IS 1885(Part 15):2008 Electrotechnical vocabulary: Part 15 IEC 60050(482):2004 Primary and secondary cells and batteries (second revision) [Amalgamating IS 1885(Part 8):1986]
7 IS 1885(Part 27):2008 Electrotechnical Vocabulary: Part 27 IEC 60050(551):1998 Power electronics (Third Revision)
8 IS 1885(Part 28):1993 Electrotechnical vocabulary: Part 28 IEC 60050(321):1986 Instrument transformers (first revision)
9 IS 1885(Part 32):1993 Electrotechnical Vocabulary: Part 32 IEC 60050(461):1984 Electric cables (first revision)
10 IS 1885(Part 35):1993 Electrotechnical vocabulary: Part 35 IEC 60050(411):1996 Rotating machinery (first revision)
11 IS 1885(Part 37):1993 Electrotechnical vocabulary: Part 37 IEC 60050(691):1973 Tariffs for electricity (first revision)
12 IS 1885(Part 38):1993 Electrotechnical vocabulary: Part 38 IEC 60050(421):1990 Power transformers and reactors (second revision)
13 IS 1885(Part 42):1993 Electrotechnical Vocabulary: Part 42 IEC 60050(436) :1990 Power capacitors (second revision)
14 IS 1885(Part 51):2012 Electrotechnical vocabulary: Part 51 IEC 60050-841:2004 Industrial electro-heating (Second
15 IS 1885(Part 54):1993 Electrotechnical Vocabulary: Part 54 IEC 60050(471):1984 Insulators (First revision)
16 IS 1885(Part 57):2008 Electrotechnical vocabulary: Part 57 IEC 60050(131):2002 Circuit Theory (Second Rrevision)
17 IS 1885(Part 60):1993 Electrotechnical Vocabulary: Part 60 IEC 60050(426):1990 Electrical apparatus for explosive atmospheres (first revision)
18 IS 1885(Part 62):1993 Electrotechnical vocabulary: Part 62 IEC 60050(212):1990 Solid insulating materials (first revision)
19 IS 1885(Part 69):1993 Electrotechnical Vocabulary: Part 69 IEC 60050(602):1983 Generation, transmission and distribution of electricity - Generation
20 IS 1885(Part 70):1993 Electrotechnical Vocabulary: Part 70 IEC 60050(604):1987 Generation, transmission and distribution of electricity - operation
21 IS 1885(Part 71):1993 Electrotechnical Vocabulary: Part 71 IEC 60050(605):1983 Generation, transmission and distribution of electricity - Substations
22 IS 1885(Part 72):2008 Electrotechnical Vocabulary : Part 72 IEC 60050 (101):1998 Mathematics (First Revision)
Sl. No. IS Number/ DOC Number Title ISO/IEC
23 IS 1885(Part 74):2010 Electroechnical Vocabulary: Part 74 Electrical and magnetic devices(First Revision)
IEC 60050(151): 2001
24 IS 1885(Part 75):2012 Electrotechnical Vocabulary: Part 75 Automatic control (First Revision)
IEC 60050-351 2006
25 IS 1885(Part 76):1993 Electrotechnical vocabulary: Part 76 Transducers
IEC 60050(431):1980
26 IS 1885(Part 77):1993 Electrotechnical Vocabulary: Part 77 Overhead lines
IEC 60050(466): 1990
27 IS 1885(Part 78):1993 Electrotechnical Vocabulary: Part 78 Genereation, transmission and distribution of electricity - General
IEC 60050(601):1985
28 IS 1885(Part 79):1993 Electrotechnical Vocabulary: Part 79 Generation, transmission and distribution of electiricity - Power system planning and management
IEC 60050(603):1986
29 IS 1885(Part 80):1994 Electrotechnical vocabulary: Part 80 General terms on measurements in electricity
IEC 60050(301):1983
30 IS 1885(Part 81):1993 Electrotechnical vocabulary: Part 81 Electrical measuring instruments
IEC 60050(302):1983
31 IS 2026(Part 3):2009 Power Transformers - Part 3 Insulaiton levels, dielectric tests and external clearances in air (third revision)
IEC 60076-3 (2000)
32 IS 2026(Part 7):2009 Power Transformers - Part 7 Loading guide for oil immersed power transformers
IEC 60076-7(2005)
33 IS 2026(Part 8):2009 Power Transformers - Part 8 Application guide
IEC 60076-8(1997)
34 IS 2026(Part 10):2009 Power Transformers - Part 10 Determination of sound levels
IS/IEC60076-10(2001)
35 IS 2071(Part 1):1993 High voltage test- techniques: Part 1 General definitions and test requirements (second revision).
IEC 60060-1:1989
36 IS 2165(Part 5):2005 Insulation coordination:Part 5 Procedures for high- voltage direct current (HVDC) converter stations
IEC 60071-5:2002
37 IS 2824:2007 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (second revision)
IEC 60112:2003
38 IS 2993:1998 A.C. motor capacitors (second revision) IEC 60252:1993
39 IS 3427:1997 A.C. Metal enclosed switchgear and controlgear for rated voltages above 1kV upto and including 52 kV(first revision)
IEC 60298:1990
40 IS 5825:1993 Test procedure for the determination of the temperature index of enamelled winding wires (first revision)
IEC 60172(1987)
41 IS 6362:1995 Designation of methods of cooling of rotating electrical machines
IEC 60034-6:1991
42 IS 6991:1985 Radiographic cassettes IEC 60406(1975)
43 IS 8437(Part 1):1992 Guide on effects of current passing through human body: Part 1General aspects(first revision)
IEC 60479-1:1984
44 IS 8437(Part 2):1992 Guide on effects of current passing through human body : Part 2 Special aspects (first revision).
IEC 60479-2:1987
Sl. No. IS Number/ DOC Number Title ISO/IEC
45 IS 8516:2011 Electrical Insulating materials – Determination of electrolytic corrosion caused by insulating materials – Test methods (First Revision)
IEC 60426(2007)
46 IS 8623(Part 1):1993 Specification for low voltage switchgear and controlgear assemblies:Part 1 Requirements for type-tested and partially type tested assemblies (first revision).
IEC 60439-1(1985)
47 IS 8623(Part 2):1993 Specification for low voltage switchgear and controlgear assemblies: Part 2 Particular requirements for busbar trunking systems (busways)-(first revision)
IEC 60439-2(1987)
48 IS 8623(Part 3):1993 Low-voltage switchgear and controlgear assemblies: Part 3 Particular requirements for equipment where unskilled persons have access for their use.
IEC 60439-3(1990)
49 IS 9335(Part 2):1998 Cellulosic papers for electrical purposes: Part 2 Methods of test (superseding IS:2188)
IEC 60554-2(2001)
50 IS 9348:1998 Coupling capacitor and capacitor dividers IEC 60358:1990
51 IS 9835(Part 1):2001 Series capacitors for power systems:Part 1 General performance testing and rating- Safety requirements - guide for installation (first revision)
IEC 60143-1:1992
52 IS 9920(Part 1):2002 High Voltage Switches - Part 1 : Switches for Rated Voltages Above 1 kV and Less Than 52 KV
* IEC 60265:1998
53 IS 9920(Part 2):2001 High voltage switches : Part 2 High voltage switches for rated voltages of 52 kV and above (First revision)
IEC 60265-2:1988
54 IS 9947:2011 Electrical Insulating materials used under severe ambient conditions – Test methods for evaluating resistance to tracking and erosion (First Revision)
IEC 60587(2007)
55 IS 10189(Part 2/Sec 1):2000
Industrial process control valves Part2/Sec 1 Flow Capacity-sizing Equations for fluid flow under Installed conditions (superseding of IS 10189(Part 2/Sec 1):1992
IEC 60534-2-1:1998
56 IS 10593:2006 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (second revision)
IEC 60599(1999)
57 IS 11182(Part 5):1993 Guide for evaluation of insulation system of electrical equipment: Part 5 Mechanical endurance functional tests
IEC 60941(1988)
58 IS 11298(Part 2):1999 Plastic films for electrical purposes: Part 2 Methods of test (first revision)
IEC 60674-2(1988)
59 IS 11298(Part 3/Sec 3):1998
Plastic films for electrical purposes:Part 3 Specifications for individual materials,Section 3 Requirements for balanced biaxially oriented Polyethylene Terephalate(PET) films used for electrical insulation
IEC 60674-3-2 (1992)
Sl. No. IS Number/ DOC Number Title ISO/IEC
60 IS 11298(Part 3/Sec 4):1998
Plastic films for electrical purposes: Part 3 Specification for individual materials, Section 4 Requirements for polycabonate (PC) films used or electrical insulation
IEC 60674-3-3(1992)
61 IS 11298(Part 3/Sec 8):1998
Plastic films or electrical purposes: Part 3 Specification for individual materials, Section 8 Requirements for fluoroethylene (FEP) films used for electrical insulation
IEC 60674-3-7(1992)
62 IS 11298(Part 3/Sec 5-7):1998
Plastic Films for Electrical Purposes Part 3 Specification for Individual Materials Section 5-7 Requirements for Polyimide Films
IEC60674-3-4to6(1993
63 IS 12032(Part 1):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 1 General information,general index,cross reference table
IEC 60617-1(1985)
64 IS 12032(Part 2):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 2 Symbols elements, qualifying symbols and other symbols having general application
IEC 60617-2(1983)
65 IS 12032(Part 3):1987 Graphical symbols for diagrams in the field of electrotechnology:Part 3 Conductors and connecting devices
IEC 60617-3(1983)
66 IS 12032(Part 4):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 4 Passive components
IEC 60617-4(1984)
67 IS 12032(Part 6):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 6 Production and conversion of electrical energy
IEC 60617-6(1983)
68 IS 12032(Part 7):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 7 Switchgear, controlgear and protective devices
IEC 60617-7(1983)
69 IS 12032(Part 8):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 8 Measuring instruments, lamps and signalling devices
IEC 60617-8(1983)
70 IS 12032(Part 11):1987 Graphical symbols for diagrams in the field of electrotechnology: Part 11 Architectural and topographical installation plans and diagrams
IEC 60617-11(1983)
71 IS 12640(Part 1):2008 Residual current operated circuit-breakers for household and simililar uses : Part 1 circuit-breakers without integral overcurrent protection(RCCBs) (First Revision)
IEC 61008-1:1996
72 IS 12640(Part 2):2008 Residual current operated circuit breakers for household and similar uses: Part 2 circuit breakers with integral overcurrent protection(RCBOs) (First Revision)
IEC 61009-1:1996
73 IS 12672:1989 Internal fuses and internal overpressure disconnectors for shunt capacitors
IEC 60593:1977
74 IS 12747(Part 1):2011 Combined flexible materials for electrical insulation - Part 1 Definition and general requirements (First Revision )
IEC 60626-1(2009)
75 IS 12747(Part 3):1998 Combined flexible materials for electrical insulation: Part 3 Specifications for individual materials
* IEC 60626-3(1996)
Sl. No. IS Number/ DOC Number Title ISO/IEC
76 IS 12762(Part 1):2010 Photovoltaic devices: Part 1 Measurement of photovoltaic current-voltage characteristics[first revision)
IEC 60904-1:2006
77 IS 12762(Part 2):1993 Photovotaic devices: Part 2 Requirements for reference solar cells
* IEC 60904-2(1989)
78 IS 12762(Part 3):1998 Photovoltaic devices: Part 3 measurement principles for terrestrial (PV) solar devices with reference spectral irradiance data
* IEC 60904-3(1989)
79 IS 12762(Part 5):2010 Photovoltaic devices: Part 5 Determination of theequivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
IEC 60904-5:1993
80 IS 12762(Part 8):2000 Photovoltaic devices: Part 8 Measurement of spectral response of a photovoltaic (PV) device
IEC 60904-8:1998)
81 IS 12762(Part 9):2010 Photovoltaic devices: Part 9 Solar simulator performance requirments
IEC 60904-9:2007
82 IS 12762(Part 10):2010 Photovoltaic devices: Part 10 Methods of linearity measurment
IEC 60904-10:1998
83 IS 12763:1989 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystaline silicon photovoltaic devices
IEC 60891(1987)
84 IS 12998(Part 1):1991 Method f measurement of airborne noise emitted by rotating machinery: Part 1 Engineering method for free field conditions over a reflecting plane
ISO 1680-1:1986
85 IS 12998(Part 2):1991 Method of measurement of airborne noise emitted by rotating machinery: Part 2 Survey method
ISO 1680-2:1986
86 IS 13072:1991 Sulphur hexafluoride for electrical purposes* IEC 60376 (1971)
87 IS 13107:1991 Guide for measurement of winding resistance of an ac machine during operation at alternating voltage
IEC 60279(1969)
88 IS 13234:1991 Guide for short circuit current calculations ln three-phase ac systems(superseding IS 5728)
IEC 60909:1988
89 IS 13235:1991 Calculation of the effects of short-circuit currents Superseding IS 5728:1970)
IEC 60865:1986
90 IS 13236:1991 Methods for counting and sizing particles in insulating liquids
* IEC 60970(1989)
91 IS 13465(Part 1):2005 Resin based reactive compounds used for electrical insulation: Part 1 Definitions and general requirements (first revision)
IEC 60455-1(1998)
92 IS 13465(Part 2):2005 Resin based reactive compounds used for electrical insulation: Part 2 Methods of test [first revision]
IEC 60455-2(1998)
93 IS 13465(Part 3/Sec 1):2006
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 1: Unfilled epoxy resinous compounds (first revision)
IEC 60455-3-1(2003)
94 IS 13465(Part 3/Sec 2):2006
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 2: Quartz filled epoxy resinous compounds [first revision)
IEC 60455-3-2
Sl. No. IS Number/ DOC Number Title ISO/IEC
95 IS 13465(Part 3/Sec 3):2006
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 3: Unfilled polyurethane compounds [first revision)
IEC 60455-3-3
96 IS 13465(Part 3/Sec 4):2006
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 4: Filled polyurethane compounds (first revision)
IEC 60455-3-4
97 IS 13465(Part 3/Sec 6):2006
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 6: Unsaturated polyester based impregnating resins
IEC 60455-3-5(2001)
98 IS 13503:2013 Classification of insulating liquids (First Revision)
IEC 61039:2008
99 IS 13516:1993 Methods of synthetic testing of high voltage alternating current circuit breakers
IEC 60427:1989
100 IS 13588:1993 Spring operated impact test apparatus and calibration
IEC 60817(1984)
101 IS 13703(Part 1):1993 Low voltage Fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 1 General requirements [superseding IS 9224 (Part 1):1979]
IEC 60269-1(1986)
102 IS 13703(Part 2/Sec 1):1993
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 1 Supplementary requirements [superseding IS 9224 (Part 2):1979]
IEC 60269-2(1986)
103 IS 13703(Part 2/Sec 2):1993
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 2 Examples of standardized fuses
IEC 60269-2-1(1987)
104 IS 13703(Part 4):1993 Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 4 Supplementary requirements for fuse- links for the protectlon of semiconductor devices [superceding IS 9224 (Part 4):1980]
IEC 60269-4(1986)
105 IS 13730:2012 Specifications for particular types of winding wires: Part 0 General requirements, Section 1 Enamelled round copper wire (First Revision)
IEC 60317-0-1:2008
106 IS 13730(Part 0/Sec 2):2011
Specifications for particular types of winding wires: Part 0 General requirements, Section 2 Enamelled rectangular copper wire (First Revision)
IEC 60317-0-2:2005
107 IS 13730:2012 Specifications for particular types of winding wires Part 0-3: General requirements – Enamelled round aluminium wire [First Revision of IS 13730 (Part 0/Sec 3):1994] I
IEC 60317-0-3:2008
108 IS 13730(Part 0/Sec 4):2011
Specifications for particular types of winding wires: Part 0 General requirements, Section 4 Glass fibre wound resin of varnish impregnated bare or enamelled rectangular copper wire (First Revision)
IEC 60317-0-4:2006
Sl. No. IS Number/ DOC Number Title ISO/IEC
109 IS 13730(Part 0/Sec 5):2012
Specifications for particular types of winding wires: Part 0 General requirements, Section 5 glass fibre braided, bare or enamelled rectangular copper wire (First Revision)
IEC 60317-0-5(2006)
110 IS 13730(Part 1):1993 Specifications for particular types of winding wires: Part 1 Polyvinyl acetal enamelled round copper wire, class 105 [superseeds IS 4800(Part 4):1968]
IEC 60317-1(1990)
111 IS 13730(Part 2):2012 Specifications for particular types of winding wires Part 2: Solderable polyurethane enamlled round copper wire, class 130, with a bonding layer. (First Revision)
IEC 60317-2 : 2000
112 IS 13730(Part 3):1996 Specifications for particular types of winding wires Part 3 polyester enamelled round copper wire, class 155
* IEC 60317-3(1990)
113 IS 13730(Part 4):1993 Specifications for particular types of winding wires: Part 4 Solderable polyurethane enamelled round copper wire, class 130 [Superseeds IS 4800(Part 6):1968]
IEC 60317-4(1990)
114 IS 13730(Part 7):1993 Specifications for particular types of winding wiresC Part 7 Polyimide enamelled round copper wire Class 220 [superseeds IS 4800(Part 11):1981]
IEC 60317-7(1990)
115 IS 13730(Part 8):1996 Specifications for particular types of winding wires: Part 8 polyesterimide enamelled round copper wire class 180
IEC 60317-8(1990)
116 IS 13730(Part 12):2012 Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 60317-12:2010
117 IS 13730(Part 13):1993 Specifications for particular types of winding wires: Part 13 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200
IEC 60317-13(1990)
118 IS 13730(Part 16):1996 Specifications for particular types of winding wires: Part 16 Polyester enamelled rectangular copper wire, Class 155
IEC 60317-16 (1990)
119 IS 13730(Part 17):1996 Specifications for particular types of winding wires: Part 17 Polyvinyl acetal enamelled rectangular copper wire, Class 105
IEC 60317-17 (1990)
120 IS 13730(Part 20):1993 Specifications for particular types of winding wires: Part 20 Solderable polyurethane enamelled round copper wire, Class 155
IEC 60317-20(1990)
121 IS 13730(Part 26):1996 Specifications for particular types of winding wires: Part 26 Polyamide-imide enamelled round copper wire, Class 200
IEC 60317-26 (1990)
122 IS 13730(Part 27):1997 Specifications for particular types of winding wires: Part 27 Paper covered rectangular copper wire
IEC 60317-27(1990)
Sl. No. IS Number/ DOC Number Title ISO/IEC
123 IS 13730(Part 28):1997 Specifications for particular types of winding wires: Part 28 Polyesterimide enamelled rectangular copper wire, Class 180
IEC 60317-28(1990)
124 IS 13730(Part 29):1996 Specifications for particular types of winding wires: Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, Class 200
IEC 60317-29(1990)
125 IS 13730(Part 31):1997 Specifications for particular types of winding wires: Part 31 Glass-fibre wound, polyester or polyesterimide varnish- treated, bare or enamelled rectangular copper wire, temperature index 180
IEC 60317-31(1990)
126 IS 13730(Part 32):1997 Specifications for particular types of winding wires: Part 32 Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155
IEC 60317-32(1990)
127 IS 13730(Part 33):1997 Specifications for particular types of winding wieres: Part 33 Glass-fibre wound, silicone varnish-treated bare or enamelled rectangular copper wire, temperature index 200
IEC 60317-33 (1990)
128 IS 13730(Part 34):2000 Specifications for particular types of winding wires: Part 34 Polyester enamelled round copper wire, Class 130 (first revision)
IEC 60317-34(1997)
129 IS 13730(Part 39):2005 Specifications for particular types of wires: Part 39 Glass-fibre braided polyester or polyesterimide varnish-treated, bare or enamelled rectrangular copper wire, temperature index 180
IEC 60317-39:1992
130 IS 13730(Part 43):2005 Specifications for particular types of wires: Part 43 Aromatic polyimide tape wrapped round copper wire, class 240
IEC 60317-43:1997
131 IS 13730(Part 44):2005 Specifications for particular types of wires: Part 44 Aromatic polyimide tape rapped rectangular copper wire, class 240
IEC 60317-44:1997
132 IS 13730(Part 48):2005 Specifications for particular types of wires: Part 48 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 155
IEC 60317-48:1999
133 IS 13730(Part 49):2005 Specifications for particular types of wires: Part 49 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 180
IEC 60317-49:1999
134 IS 13730(Part 50):2005 Specifications for particular types of wires: Part 50 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 200
IEC 60317-50:1999
135 IS 13730(Part 53):2005 Specifications for particular types of wires: Part 53 Aromatic polyamide (aramid ) tape wrapped rectangular copper wire, temperature index 220
IEC 60317-53:1999
136 IS 13770:1993 Insulating foam-filled tubes and solid rods for live working
* IEC 60855:1985
Sl. No. IS Number/ DOC Number Title ISO/IEC
137 IS 13771:1993 Conductive clothing for live working at nominal voltage up to 800 kV ac
* IEC 60895:1987
138 IS 13772:1993 Hand tools for live working up to 1000 V ac and 1500 V dc
* IEC 60900:1989
139 IS 13773:1993 Sleeves of insulating material for live working
IEC 60984:1990
140 IS 13774:1993 Specification for gloves and mitts of insulating materials for live working
* IEC 60903:1988
141 IS 13778(Part 1):2011 Methods of tests for winding wires: Part 1 General (First Revision)
IEC 60851-1:1996
142 IS 13778(Part 2):1993 Methods of tests for winding wires: Part 2 Determination of dimensions
IEC 60851-2:1985
143 IS 13778(Part 3):2012 Winding wires – Test methods - Part 3: Mechanical properties [First Revision of IS 13778 (Part 3)
IEC 60851-3:2009
144 IS 13778(Part 4):2011 Methods of tests for winding wires: Part 4 Chemical properties
IEC 60851-4:2005
145 IS 13778(Part 5):2012 Winding wires – Test methods - Part 5: Electrical properties [First Revision of IS 13778 (Part 5)
IEC 60851-5 : 2008
146 IS 13778(Part 6):2011 Methods of tests for winding wires: Part 6 Thermal properties (First Revision)
IEC 60851-6:1996
147 IS 13925(Part 2):2002 Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 2 Endurance testing (first revision)
IEC60871-2:1999
148 IS 13925(Part 3):2002 Shunt capacitors for ac power systems having a rated voltage above 1000 V: Part 3 Protection of shunt capacitors and shunt capacitors banks.
IEC 60871-3:1996
149 IS 13937(Part 1):1994 Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 1 General conditions and definitions
ISO 7574-1:1985
150 IS 13937(Part 2):1994 Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 2 Methods of stated values for individual machines
ISO 7574-2:1985
151 IS 13937(Part 3):1994 Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 3 Simple (transition) method for stated values for batches of machines
ISO 7574-3:1985
152 IS 13937(Part 4):1994 Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 4 Methods for stated values for batches of machines
ISO 7574-1985
153 IS 13947(Part 5/Sec 2):2004
Low voltage switchgear and controlgear :Part 5 Control circuit devices and switching elements Section 2 Proximity switches
IEC 60947-5-2(2000)
154 IS 13961:1994 Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
IEC 60832:1988
155 IS 14195:1994 Brush-holders for electrical machines guide to the measurement of the static thrust applied to brush
IEC 61015(1990)
Sl. No. IS Number/ DOC Number Title ISO/IEC
156 IS 14196:1994 Definitions and terminology of brush-holders for electrical machines
IEC 60560(1977)
157 IS 14197:1994 Code for model acceptance tests of hydraulic turbines
IEC 60193:1965
158 IS 14198(Part 1):1994 Rules for steam turbines thermal acceptance tests - Method A
IEC 60953-1:1990
159 IS 14198(Part 2):1994 Rules for steam turbines thermal acceptance tests - Method B
IEC 60953-2:1990
160 IS 14205(Part 1):1994 Steam turbines Part 1 Specification IEC 60045-1:1991
161 IS 14222:1995 Impulse withstand levels of rotating ac machines with form wound stator coils
IEC 60034-15:1990
162 IS 14244:1995 Characteristic parameters of stand alone photovoltaic (PV) systems
IEC 61194(1992)
163 IS 14254(Part 1):2003 Programmable controller: Part 1 General information(first revision)
IEC 61131-1(2003)
164 IS 14254(Part 2):2003 Programmable Controllers: Part 2 Equipment Requirements and Tests (first revision)
IEC 61131-2(2003)
165 IS 14286:2010 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualiication and type approval (first revision)
IEC 61215:2005
166 IS 14568(Part 2):1998 Dimensions and output series for rotating electrical machines Part 2 Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-2(1990)
167 IS 14570:2012 Electrical measuring transducers for converting AC electrical quantities to to analogue or digital signals
IEC 60688:1992
168 IS 14571:1998 Electrical measuring Instruments X-Y recorders.
IEC 61028(1991)
169 IS 14577:1998 Short-circuit current evaluation with special regard to rated short-circuit capacity of circuit-breakers in installations in ships
IEC 60363(1998)
170 IS 14614:1998 Residual Current Operated Protective Devices (RCDs) for household and similar use - Electromagnetic compatibility.
IEC 61543(1995)
171 IS 14657:1998 Gas-insulated metal-enclosed switchgear for rated voltage 72.5 kV and above - requirements for switching of bus-charging current by disconnectors.
IEC 61259:1994
172 IS 14658:1999 High-voltage alternating current circuit-breakers- Guide for short-circuit and switching test procedures for metal-enclosed and dead tank circuit-breakers
IEC 61633:1995
173 IS 14659:1999 A.C. insulation-enclosed switchgear and controlgear for rated voltage above 1 kV and upto and including 38 kV
IEC 60466:1987
174 IS 14666:1999 High voltage alternating current switch fuse combinations
IEC 60420:1990
175 IS 14674:1999 High voltage alternating current circuit breakers-Guide for seismic qualifications of high-voltage alternating current circuit-breakers
IEC 61166:1993
Sl. No. IS Number/ DOC Number Title ISO/IEC
176 IS 14786:2000 High voltage/ low voltage prefabricated substations
IEC 61330:1995
177 IS 14801:2000 Terminology for high voltage direct current ( HVDC ) transmission.
IEC 60633(1998)
178 IS 14841(Part 2/Sec 1):2000
Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools Section 1 Basic dimensions
IEC 60264-2-1:1989
179 IS 14841(Part 2/Sec 2):2000
Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material
IEC 60264-2-2:1990
180 IS 14841(Part 3/Sec 1):2000
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 1 basic dimensions
IEC 60264-3-1:1999
181 IS 14841(Part 3/Sec 2):2000
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material
IEC 60264-3-2:1999
182 IS 14841(Part 3/Sec 3):2000
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 3 Specification for non-returnable spools made from thermoplastic material
IEC 60264-3-3:1990
183 IS 14841(Part 3/Sec 4):2000
Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 4 basic dimensions of containers for taper barrelled delivery spools
IEC 60264-3-4:1999
184 IS 14841(Part 4/Sec 1):2000
Packaging of winding wires: Part 4 Methods of test, Section 1 Delivery spools made from thermoplastic material
IEC 60264-4-1:1997
185 IS 14902(Part 1):2001 Performance of high-voltage d.c (HVDC) systems :Part 1 Steady state conditions.
IEC 60919-1(1988)
186 IS 14902(Part 2):2001 Performance of high-voltage d.c (HVDC) systems :Part 2 Faults and switching.
IEC 60919-2(1991)
187 IS 14902(Part 3):2005 Performance of high -voltage direct current (HVDC) systems:Part 3 Dynamic conditions
IEC 60919-3:1999
188 IS 14911(Part 1):2001 Thyristor valves for high-voltage direct current (HVDC) power transmission: Part 1 Electrial Testing
IE 60700-1(1998)
189 IS 14956:2001 Live working - Minimum approach distances - method of calculation
* IEC 61472:1998
190 IS 14957:2001 Aerial devices with insulating boom used for live working
IEC 61057:1991
191 IS 14981:2001 Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - lance earthing
IEC 61219:1993
192 IS 14993:2001 Saddles, pole clamps (stick clamps) and accessories for live working
IEC 61236:1993
193 IS 14994:2001 Live working - Guidelines for quality assurance plans
* IEC 61318:1994
194 IS 15086(Part 1):2001 Surge arresters: Part 1 Non-linear resistor type gapped surge arresters for a.c. systems [Superseding IS 3070(Part 1)]
IEC 60099-1:1991
Sl. No. IS Number/ DOC Number Title ISO/IEC
195 IS 15086(Part 5):2001 Surge arresters : Part 5 Selection and application recommendations (Superseading IS 4004)
IEC 60099-5:1996
196 IS 15199(Part 1):2002 Power convertors: installed on board railway rolling stock - Part 1 Characteristics and test methods
IEC 61287-1(1995)
197 IS 15199(Part 2):2002 Power convertors: installed on board railway rolling stock - Part 2 Additional technical information
IEC 61287-2(2001)
198 IS 15382(Part 1):2003 Insulation coordination for equipment within low voltage system: Part 1 Principles requirements and test
IEC 60664-1(2002)
199 IS 15382(Part 2/Sec 1):2003
Insulation coordination for equipment within low voltage system : Part 2 Appication guide, Section 1 Dimensioning procedure worksheets and dimensioning examples
IEC 60664-2-1(1977)
200 IS 15382(Part 3):2006 Insulation coordination for equipment within low voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution
IEC 60664-3(2003)
201 IS 15382(Part 4):2003 Insulation coordination for equipment within low voltage system: Part 4 Consideration of high frequency voltage stress
IEC 60664-4(1997)
202 IS 15395:2003 Industrial ac net- work affected by harmonics-application of filters and shunt capacitors
IEC 61642 :1997
203 IS 15405(Part 1):2003 Live Working - flame resistance materials for clothing for thermal protection of working thermal hazards of an electric arc Part 1 Test Methods
* IEC 61482-1:2002
204 IS 15406(Part 1):2003 Capacitors for microwave ovens: Part 1 General
IEC 61270-1:1996
205 IS 15407:2003 Live working - Guidelines for dielectric testing of tools and equipment
IEC 61278:1997
206 IS 15416:2003 Live working - Terminology for tools equipments and devices (Superceding IS 13985)
IEC 60743:2001
207 IS 15597:2005 Determination of power losses in high voltage direct current (HVDC) converter stations
IEC 61803:1999
208 IS 15617:2005 Power electronics for electrical transmission and distribution systems-Testing of thyristor valves for static var compensations
IEC 61954:2003
209 IS 15638(Part 1):2006 Instruments and software used for measurement in high voltage impluse tests: Part 1 Requirements for instruments( Superseeding IS 11349)
IEC 61083-1(2001)
210 IS 15638(Part 2):2006 Instruments and software used for measurements in high voltage impulse tests: Part 2 Evaluation of software used for the determination of the parameters of impulse waveforms (Superseeding IS 11349)
IEC 61083-2(1996)
211 IS 15644:2006 Safety of electric toys IEC 62115(2003)
212 IS 15664:2006 Gas turbines - Acceptance tests ISO 2314(1989)
213 IS 15665:2006 Gas turbines - Vocabulary ISO 11086(1996)
Sl. No. IS Number/ DOC Number Title ISO/IEC
214 IS 15666(Part 1):2006 Gas turbines - Procurement - Part 1: General introduction and definitions
ISO 3977-1(1997)
215 IS 15666(Part 2):2006 Gas turbines - Procurement - Part 2: Standard reference conditions and ratings
ISO 3977-2(1997)
216 IS 15666(Part 3):2006 Gas turbines - Procurement - Part 3: Design requirements
ISO 3977-3(2004)
217 IS 15666(Part 4):2006 Gas turbines - Procurement - Part 4: Fuels and environment
ISO 3977-4(2002)
218 IS 15666(Part 5):2006 Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
ISO 3977-5(2001)
219 IS 15666(Part 7):2006 Gas turbines - Procurement - Part 7: Technical information
ISO 3977-5(2002)
220 IS 15666(Part 8):2006 Gas turbines - Procurement - Part 8: Inspection, testing, installation and commissioning
ISO 3977-8(2002)
221 IS 15666(Part 9):2006 Gas turbines - Procurement - Part 9: Reliability, availability, maintainability and safety
ISO 3977-9(1999)
222 IS 15667:2006 Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations
ISO 19860(2005)
223 IS 15668:2006 Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
IEC 61198(1993)
224 IS 15767:2008 Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes – Nickel-Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination
IEC 62259:2003
225 IS 15885(Part 2/Sec 13):2012
Lamp Control gear Part 2 Particular Requirements. Section 13 D.C. or A.C. Supplied Electronic Controlgear For Led Modules
IEC 61347-2-13(2006)
226 IS 16046:2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
IEC 62133(2002)
227 IS 16047:2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications
IEC 61960 (2011)
228 IS 16081:2013 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
IEC 61099:2010
229 IS 16108:2012 Photobiological Safety of Lamp and Lamp Systems
IEC 62471 (2006)
230 IS 60034(Part 1):2004 Rotating electrical machines - Part 1 Rating and performance
IS/IEC 60034-1(2004)
231 IS 60034(Part 5):2000 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Superseding IS 4691)
IS/IEC 60034-5(2000)
232 IS 60034(Part 8):2002 Rotating electrical machines - Part 8: Terminal markings and direction of rotation (Superseding IS 4728)
IS/IEC 60034-8(2002)
Sl. No. IS Number/ DOC Number Title ISO/IEC
233 IS 60041:2000 Field acceptance tests to determine the hydraulic performance of turbines, storage pumps and pump turbines
IS/IEC 60041(2000)
234 IS 60044(Part 1):2003 Instrument transformers: Part 1 Current transformers
IS/IEC 60044-1(2003)
235 IS 60060(Part 2):2010 High voltage test techniques - Part 2 Measuring systems (IEC 60060-2:2010)
IS/IEC 60060-2:2010
236 IS 60071(Part 1):2006 Insulation Coordination - Part 1 Definitions, parinciples and rules
IS/IEC 60071-1:2006
237 IS 60071(Part 2):1996 Insulation Coordination - Part 2 Application guide (IEC 60071-2:1996)
IS/IEC 60071-2:1996
238 IS 60079:2007 Explosive Atmospheres. Part 0: Equipment - General Requirements (First Revision)
IEC 60079-0(2007)
239 IS 60079(Part 1):2007 Explosive atmospheres : Part 1 Equipment protection by flameproof enclosures "d" (superseding IS 2148:2004 )
IEC 60079-1(2007)
240 IS 60079(Part 2):2007 Explosive atmospheres: Part 2 Equipment protection by pressurized enclosure "p" (superseding IS 7389:2004)
IEC 60079-2 (2007)
241 IS 60079(Part 5):2007 Explosive atmospheres: Part 5 Equipment protection by powder filling "q" (superseding IS 7724:2004)
IEC 60079-5 (2007)
242 IS 60079(Part 7):2006 Explosive atmospheres: Part 7 Equipment protection by increased safety "e" (superseding IS 6381:2004)
IEC 60079-7 (2006)
243 IS 60079(Part 11):2006 Explosive atmospheres: Part 11 Equipment protection by intrinsic safety "i" (superseding IS 5780:2002)
IEC 60079-11(2006)
244 IS 60079(Part 15):2005 Electrical apparatus for explosive gas atmospheres : Part 15 Construction, test and marking of type of protection "n" electrical apparatus (supersedingIS 8289)
* IEC 60079-15(2005)
245 IS 60079(Part 16):1990 Electrical apparatus for explosive gas atmospheres: Part 16 Artificial ventilation for the protection of analyzer(s) houses
IEC 60079-16 (1990)
246 IS 60079(Part 17):2007 Explosive atmospheres : Part 17 Electrical installations inspection and maintenance
IEC 60079-17 (2007)
247 IS 60079(Part 18):2009 Explosive Atmospheres Part 18 Equipment Protection By Encapsulation "m" (First Revision)
IEC 60079-18:2009
248 IS 60079(Part 19):2006 Explosive atmospheres : Part 19 Repair, overhaul and reclamation
* IEC 60079-19(2006)
249 IS 60079(Part 20/Sec 1):2000
Explosive Atmospheres Part 20 material Characteristics For Gas and Vapour Classification Section 1 Test Methods and Data(Superseding IS 7820, IS 9570, IS 9735, IS/IEC 60079-20)
IS/IEC 60079-20-1
250 IS 60079(Part 25):2003 Electrical apparatus for explosive gas atmospheres : Part 25 Intrinsically safe systems
* IEC 60079-25(2003)
251 IS 60079(Part 28):2000 Explosive Atmospheres Part 28 Protection of Equipment And Transmission Systems Using Optical Radiation
IS/IEC 60079-28
Sl. No. IS Number/ DOC Number Title ISO/IEC
252 IS 60079(Part 30/Sec 1):2007
Explosive Atmospheres Part 30 Electrical Resistance Trace Heating Section 1 General And Testing Requirements (Superseding IS 14774 (Part 1)
IS/IEC 60079-30-1
253 IS 60079(Part 30/Sec 2):2007
Explosives Atmospheres Part 30 Electrical Resistance Trace Heating Section 2 Application Guide for Design , Installation And Maintenance (Superseding IS 14774 (Part 2)
IS/IEC 60079-30-2
254 IS 60079(Part 31):2008 Explosives Atmospheres Part 31 Equipment Dust Ignition Protection By Enclosures"T"
IS/IEC 60079-31
255 IS 60127(Part 1):2006 Miniture fuses: Part 1 Definitions for miniature fuses and general requirements for miniature fuse links(first revision)
IEC 60127-1(2006)
256 IS 60127(Part 2):2003 Ministure fuses : Part 2 Cartridge fuse links (First Revision)
IS/IEC 60127-2:2003
257 IS 60127(Part 4):2005 Miniature fuses: Part 4 Universal modular fuse Link (UMF)
IEC 60127-4(2005)
258 IS 60127(Part 6):1994 Miniature fuses: Part 6 Fuse holders for miniature cartridge fuse links
IEC 60127-6:1994
259 IS 60309(Part 1):2002 Plugs, socket-outlets and couplers for industrial purposes: Part 1 General requirements (first revision)
IEC 60309-1(1999)
260 IS 60309(Part 2):2002 Plugs, socket-outlets and couplers for industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories (first revision)
IEC 60309-2(1999)
261 IS 60320(Part 1):2001 Appliance couplers for household and similar general purposes Part 1 General requirements
IEC 60320-1(2001)
262 IS 60320(Part 2/Sec 2):1998
Appliance couplers for household and similar general purposes part 2-2 Interconnection couplers for household and similar equipment
IEC 60320-2-2(1998)
263 IS 60371(Part 3/Sec 1):2006
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 1: Commutator separators and materials (Superseding IS: 9299(Part 3/Sec 1):1979)
IS/IEC60371-3-1:2006
264 IS 60371(Part 3/Sec 2):2005
Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 2 : Mica paper [Superseding IS 9299(Part 3/Sec 7)]
IS/IEC60371-3-2:2005
265 IS 60371(Part 3/Sec 3):1983
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 3 : Rigid mica materials for heating equipment [Superseding IS 9299(Part 3/Sec 4)]
IS/IEC60371-3-3:1983
266 IS 60371(Part 3/Sec 4):1992
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 4 Polyester film-backed mica Paper with a B-stage epoxy Resin binder
IS/IEC60371-3-4:1992
Sl. No. IS Number/ DOC Number Title ISO/IEC
267 IS 60371(Part 3/Sec 5):2005
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post- Impregnation (VPI) [Supetseding IS 9299(Part 3/Sec 3)& IS 9299 (Part 3/Sec 5)]
IS/IEC60371-3-5:2005
268 IS 60371(Part 3/Sec 6):1992
Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 6 : Glass-backed mica paper With a B-stage epoxy resin binder (Superseding IS: 9299(Part 3/Sec 6):1993)
IS/IEC60371-3-6:1992
269 IS 60371(Part 3/Sec 7):1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 7 : Polyester film mica paper with an epoxy resin binder for single conductor taping [Supetseding IS 9299(Part 3/Sec 3)& IS 9299 (Part 3/Sec 5)]
IS/IEC60371-3-7:1995
270 IS 60371(Part 3/Sec 8):1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 8 : Mica paper tapes for flame-resistant security cables
IS/IEC60371-3-8:1995
271 IS 60371(Part 3/Sec 9):1995
Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 9 : Moulding micanite [Superseding IS 9299 (Part 3/ Sec 2)]
IS/IEC60371-3-9:1995
272 IS 60470:2000 High Voltage Alternating Current Contactors and Contactor-Based Motor-Starters (superseeding IS 9046:1978 and IS 12661(Part 1):1988
IS/IEC 60470:2000
273 IS 60517:1990 Gas insulated metal enclosed switchgear for rated voltages of 72.5 KV and above
IS/IEC 60517:1990
274 IS 60519(Part 1):1984 Safety in electro-heat installations:Part 1General requirements [Superseding IS 9080 ( Part 1)].
* IEC 60519-1:1984
275 IS 60519(Part 3):1988 Safety in electroheat installations:Part 3 Particular requirements for induction and conduction heating and induction melting installations[Superseding IS 9080 (Part 3 )].
IEC 60519-3:1988
276 IS 60519(Part 5):1980 Safety in electroheat installation :Part 5 Plasma installations
IEC 60519-5:1980
277 IS 60519(Part 9):1987 Safety in electroheat installations:Part 9 Particular requirements for high frequency dielectric heating installations
* IEC 60519-9:1980
278 IS 60529:2001 Classification of Degrees of protection provided by enclosures (IP Code) (Superceding IS 12063:1987)
IS/IEC 60529:2001
279 IS 60534(Part 2/Sec 3):1997
Industrial - process control valves - Part 2/Sec 3 flow capacity test procedures
IEC 60534-2-3 :1997
280 IS 60691:1993 Thermal links - requirements and application guide
IEC 60691:1993
281 IS 60715:1981 Dimensions of Low-voltage swtichgear and controlgear - Standardized mounting on rails of mechanical support of electrical devices in switchgear and controlgear installations(Superseding IS 11039)
IS/IEC 60715:1981
Sl. No. IS Number/ DOC Number Title ISO/IEC
282 IS 60730(Part 1):1999 Automatic electrical controls for household and similar use: Part 1 General requirements
IEC 60730-1 : 1999
283 IS 60898(Part 1):2002 Electrical Accessories - circuit breakers for over protection for household and similar installations Part 1 Circuit breakers for a.c. . operation ( Superseding IS 8828)
IS/IEC 60898-1:2002
284 IS 60898(Part 2):2003 Electrical Accessories - circuit breakers for over protection for household and similar installations Part 2 Circuit breakers for a.c. and d.c. operation
IS/IEC 60898-2:2003
285 IS 60947(Part 1):2007 Low voltage switchgear and controlgear: Part 1 General Rules (Superseding IS 13947(Part 1) (IEC 60947-1(2007)) (First Revision)
IS/IEC 60947-1:2007
286 IS 60947(Part 2):2003 Low voltage switchgear and controlgear: Part 2 Circuit breakers[Superseding IS 13947( Part 2 ):1993]
IS/IEC 60947-2:2003
287 IS 60947(Part 3):1999 Low voltage switchgear and controlgear : Part 3 Switches, disconnectors, switch-disconnectors and fuse combination units [Superseding IS 13947(Part 3)]
IS/IEC 60947-3:1999
288 IS 60947(Part 4/Sec 1):2000
Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1)
ISIEC 60947-4-1:2000
289 IS 60947(Part 4/Sec 2):1999
Low voltage switchgear and controlgear: Part 4 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters
ISIEC 60947-4-2:1999
290 IS 60947(Part 4/Sec 3):1999
Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non-motor loads
ISIEC 60947-4-3:1999
291 IS 60947(Part 5/Sec 1):2003
Low-voltage switchgear and controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (Sperseding of IS 13947 Part 5/Sec 1)
ISIEC 60947-5-1:2003
292 IS 61058(Part 1):2001 Switches for Appliances: Part 1 General Requirement (IEC 61058-1)
IS/IEC 61058-1(2000)
293 IS 61241(Part 2/Sec 1):2000
Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 1 Method for determining the minimum ignition temperatures of dust (Superseding IS 12315-2:1998)
IEC 61241-2-1(1994)
294 IS 61241(Part 2/Sec 3):1994
Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 3 Method for determining minimum ignition energy of dust/air mixtures
IEC 61241-2-3(1994)
295 IS 61241(Part 4):2001 Electrical apparatus for use in the presence of combustible dust: Part 4 Type of protection ―pD‖
IEC 61241-4 (2001)
Sl. No. IS Number/ DOC Number Title ISO/IEC
296 IS 61241(Part 10):2004 Electrical apparatus for use in the presence of combustible dust: Part 10 : Classification of areas where combustible dusts are or may be present
IEC 61241-10 (2004)
297 IS 61308:1994 High frequency dielectric heating installations -Test methods for the determination of power output.
IEC 61308:1994
298 IS 61508(Part 0):2000 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 0: Functional Safety
(IEC 61508-0:2005)
299 IS 61508(Part 1):2000 Functional safety of electrical/electronic/progrtammable elctronic safety - related system - Part 1 General requirement
IEC 61508-1:2000
300 IS 61508(Part 2):2000 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 2 requirement for electrical/Electronic/programmable electronic safety - related systems
(IEC 61508-2:2000)
301 IS 61508(Part 3):1998 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 3 software requirements
(IEC 61508-3:1998)
302 IS 61508(Part 4):1998 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 4 Definitions and abbreviations
(IEC 61508-4:1998)
303 IS 61508(Part 5):1998 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 5 Examples of Methods for the determinations of safety integrity levels
(IEC 61508-5:1998)
304 IS 61508(Part 6):2000 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 6 Guidelines on the applications
(IEC 61508-6:2000)
305 IS 61508(Part 7):2000 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 7 Over view of techniques and measures
IEC 61508-7:2000)
306 IS 61511(Part 1):2003 Functional safety of electrical/electronic/programmable electronic safety - related system - Part 1 Framework, definitions,System, hardware and software requirements
(IEC 61511-1:2003)
307 IS 61511(Part 2):2003 Functional safety - safety instrumented systems for the process industry sector Part 2 Guidelines for the Applications
IEC 61511-2:2003
308 IS 61511(Part 3):2003 Functional safety - safety instrumented systems for the process industry sector - Part 3 Guidance for the determination of the required safety integrity levels
IEC 61511-3:2003
Sl. No. IS Number/ DOC Number Title ISO/IEC
309 IS 61557(Part 1):2007 Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitorin or protective measurs - Part 1: Genral requirments IEC 61557-1 (Superseding IS 2992)
IEC 61557-1(2007)
310 IS 61557(Part 2):2007 Electrical safety in low voltage distribance systems UP to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring or protective measures Part 2 Insulation resistance IEC 61557-2(Superseding IS 11994)
IEC 61557-2(2007)
311 IS 61557(Part 5):2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment dor testing, measuring or monitoring or protective measures - Part 5: Resistance to earth IEC 61557-5 (Superseding IS 9223)
IEC 61157-5(2007)
312 IS 61558(Part 1):1997 Safety of power Transformer,power supply units and similar: Part 1 General requirement and test
IS/IEC 61558-1(1997)
313 IS 61558(Part 2/Sec 6):1997
Safety of power Transformers, power supply units and similar: Part 2 particular requirements, Section 6 Safety Isolating transformers for general use
IS/IEC 61558-2-6(97)
314 IS 61558(Part 2/Sec 7):2007
Safety of power Transformers, power supply units and similar part 2-7: Particulars requirements for transformers for toys
IS/IEC 61558-2-7(07)
315 IS 61683:1999 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
IEC 61683:1999
316 IS 61701:1995 Salt mist corrosion testing of photovoltaic (PV) modules
IEC 61701:1995)
317 IS 61724:1998 Photovoltaic system performance monitoring - Guidelines for measurment, data exchange and analysis
IEC 61724:1998
318 IS 61725:1997 Analytical expression for daily solar profiles IS/IEC 61725(1997)
319 IS 61730(Part 2):2004 Photovoltaic (PV) module safety qualification:Part 2 Requirments for testing
IEC 61730-2:2004
320 IS 61829:1995 Crystalline silicon photovoltaic (PV) array - On site measurment of I-V characteristics
IEC 61829 : 1995
321 IS 62051(Part 1):2004 Electricity Metering - Data exchange for meter reading tariff and load control Part 1 Terms relate to data exchange with metering equipment using DLMS/COSEMV (IEC 62051-1:2004)
IS/IEC 62051-1:2004
322 IS 62056(Part 21):2002 Electricity Metering Data exchangefor meter reading, tariff and load control- Part 21 direct local data exchange (IEC 62056-21:2002)
IS/IEC 62056-21:2002
323 IS 62056(Part 42):2002 Electricity metering Data exchange for meter reading tariff and load control -Part 42 Physical layer services and procedures for connection-oriented asynchronous data exchange. (IEC 62056-42:2002)
IS/IEC 62056-42:2002
Sl. No. IS Number/ DOC Number Title ISO/IEC
324 IS 62056(Part 46):2007 Electricity metering Data exchange for meter reading tariff and load control -Part 46 Data link layer using HDLC protocol (IEC 62056-46:2007)
IS/IEC 62056-46:2007
325 IS 62056(Part 47):2006 Electricity Metering - Data Exchange for meter reading, tariff and load control Part 47 COSEM transport layers for IPv4 networks
IS/IEC 62056-47:2006
326 IS 62056(Part 53):2006 Electricity metering Data exchange for meter reading tariff and load control -Part 53 COSEM application layer'(IEC 62056-53:2006)
IS/IEC 62056-53:2006
327 IS 62056(Part 61):2006 Electricity metering Data exchange for meter reading tariff and load control -Part 61 Object identification system (OBIS) (IEC 62056-61:2006)
IS/IEC 62056-61:2006
328 IS 62056(Part 62):2006 Electricity metering Data exchange for meter reading tariff and load control -Part 62 Interface Classes' (IEC 62056-62:2006)
IS/IEC 62056-62:2006
329 IS 62264(Part 1):2003 Enterprise control system Integration Part 1 Models and Terminology
IEC 62264-1:2003
330 IS 62264(Part 2):2004 Enterprise control system Integration Part 2 Objects Models Attributes
IEC 62264-2:2004
331 IS 62271(Part 1):2007 High-voltage switchgear and controlgear:Part 1 Common Specification (IEC 62271-1 :2007) (Superseding IS 12729)
IEC 62271-1 :2007
332 IS 62271(Part 100):2008 High-voltageswitchgear and controlgear:Part 100 Alternating current Circuit Breakers(IEC 62271-100 :2008)
IEC 62271-100 :2008
333 IS 62271(Part 102):2003 High-voltage switchgear and controlgear:Part 102 High-voltage alternating current circuit breakers
IS/IEC62271-102:2003
334 IS 62271(Part 105):2002 High-voltageswitchgear and controlgear: Part 105 Alternating current switch-fuse combinations
IS/IEC62271-105:2002
335 IS 62271(Part 109):2008 High-voltag switchgear and controlgear:Part 109 Alternating current Series Capacitor by pass Switches (IEC 62271-109 :2008)
IEC 62271-109 : 2008
336 IS 62271(Part 200):2003 High-voltage switchgear and controlgear: Part 200 AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up To and Including 52 kV
IS/IEC62271-200:2003
337 IS 62271(Part 201):2006 High-voltage switchgear and controlgear: Part 201 AC Insulation Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Above 52 kV
IS/IEC62271-201:2006
338 IS 62271(Part 203):2003 High-voltage switchgear and controlgear: Part 203 Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
ISIEC 62271-203:2003
339 ISQC 160000 : 1988 Electrical relays:Part 1 tests and measurement procedures for electromechanical all-or-nothing relays
IECQC 60255-7:1978
340 ISQC 160000 : 1988 Electrical relays:Part 2 Applications of the IEC quality assessment systems for electronic components to all-or-nothing relays
IECQC 60255-10:1979
Sl. No. IS Number/ DOC Number Title ISO/IEC
341 ISQC 160100 : 1988 Electrical relays, sectional specification: Electromechanical all-or-nothing relays of assessed quality
IECQC 160100:1983
342 ISQC 160101 : 1988 Electrical relays, blank detail specification: electromechanical all-or-nothing relays of assessed quality, test schedules 1, 2 and 3
IECQC 160101:1993
Total : DUAL NUMBER STANDARDS = 342
Sl. No. IS Number/ DOC Number Title ISO/IEC
EQUIVALENT STANDARDS
1 IS 302(Part 1):2008 Safety of household and similar electrical appliances: Part 1 General requirements (sixth revision)
IEC 60335-1(2006)
2 IS 302(Part 2/Sec 2):1997
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 2 Vacuum cleaners and water suction cleaning appliances
IEC 60335-2-2(1993)
3 IS 302(Part 2/Sec 3):2007
Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 3 Electric iron (first revision)
IEC 60335-2-3(2002)
4 IS 302(Part 2/Sec 4):1993
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 4 Spin extractors
IEC 60335-2-4(1984)
5 IS 302(Part 2/Sec 6):2009
Safety of household and similar electrical appliances: Part 2 Particuar requirements, Section 6 Cooking ranges, cooking tables, ovens and similar appliances (First Revision)
IEC 60335-2-6(1986)
6 IS 302(Part 2/Sec 7):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 7 Domestic electric clothes washing machines
IEC 60335-2-7(1984)
7 IS 302(Part 2/Sec 8):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 8 Electric shavers, hair clippers and similar appliances
IEC 60335-2-8(1987)
8 IS 302(Part 2/Sec 9):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 9 Electric toasters, grills, roastors and similar appliances (First Revision)
IEC 60335-2-9(1986)
9 IS 302(Part 2/Sec 11):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 11 Tumbler dryers
IEC 60335-2-11(1976)
10 IS 302(Part 2/Sec 12):1993
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 12 Warming plates and similar appliances
IEC60335-2-12(1987)
11 IS 302(Part 2/Sec 13):1994
Safety of household and similar electrical appliances :Part 2 particular requirements, Section 13 Frying pans, deep fat fryers and similar appliances
IEC 60335-2-13(1987)
12 IS 302(Part 2/Sec 14):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 14 Electric kitchen machines (First Revision)
IEC 60335-2-14(1984)
13 IS 302(Part 2/Sec 15):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 15 Appliances for heating liquids (First Revision)
IEC 60335-2-15(1986)
14 IS 302(Part 2/Sec 21):2011
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 21 Stationary storage type electric water heater (First Revision
IEC 60335-2-21(1989)
Sl. No. IS Number/ DOC Number Title ISO/IEC
15 IS 302(Part 2/Sec 23):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 23 Appliances for skin and hair care (First Revision)
IEC 60335-2-23(1986)
16 IS 302(Part 2/Sec 24):1994
Safety of household and similar electrical appliances:Part 2 Particular requirements, Sec 24 Refrigerators, food freezers and ice makers
IEC 60335-2-24(1992)
17 IS 302(Part 2/Sec 25):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 25 Microwave ovens
* IEC 60335-2-25(1988)
18 IS 302(Part 2/Sec 26):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 26 Clocks
IEC 60335-2-26(1987)
19 IS 302(Part 2/Sec 30):2007
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 30 Room heaters (first revision)
IEC 60335-2-30(2002)
20 IS 302(Part 2/Sec 31):2009
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 31 Range Hoods
IEC 60335-2-31 2002)
21 IS 302(Part 2/Sec 32):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements:Section 32 Massage appliances
IEC 60335-2-32(1993)
22 IS 302(Part 2/Sec 35):2011
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 35 Electric instantaneous water heater(First Revision
IEC 60335-2-35(1991)
23 IS 302(Part 2/Sec 45):1994
Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 45 Electric heating tools
IEC 60335-2-45(1986)
24 IS 302(Part 2/Sec 46):1993
Safety of household and similar electrical appliances: Part 2 Particular requirements,Section 46 Electric steam cookers
IEC 60335-2-46(1986)
25 IS 302(Part 2/Sec 59):1999
Safety of household and similar electrical appliances : Part 2 Particular requirements , Section 59 Insect killers
IEC 60335-2-59(1990)
26 IS 302(Part 2/Sec 76):1999
Safety of household and similar electrical appliances Part 2 Particular requirements, Section 76 Electric fence energizers
IEC 60335-2-76(1997)
27 IS 302(Part 2/Sec 80):2003
Safety of household and similar electrical appliances:Part 2 Particular requirements, Sec 80 Fans (Superseding IS 12155:1987)
* IEC 60335-2-80
28 IS 302(Part 2/Sec 201):2008
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 201 Electric immersion water heaters(first revision)
IEC 60335-2-74(2002)
29 IS 325:1996 Three-phase induction motors(first revision) IEC 60034-1(1983)
30 IS 365:1983 Electric hot plates (second revision) IEC 60302-2-6(1982)
31 IS 366:1991 Electric irons (fourth revision)* IEC 60311(1988)
32 IS 367:1993 Electric kettles and jugs for household and similar use (fourth revision)
IEC 60530(1975)
33 IS 369:1992 Electric radiators (third revision)* IEC 60675
Sl. No. IS Number/ DOC Number Title ISO/IEC
34 IS 398(Part 1):1996 Aluminium conductors for overhead transmission purposes: Part 1 Aluminium stranded conductors (third revision)
IEC 60889:1987
35 IS 398(Part 2):1996 Aluminium conductors for overhead transmission purposes: Part 2 Aluminium conductors, galvanized steel reinforced (third revision)
IEC 889 :1987
36 IS 398(Part 4):1994 Aluminium conductors for overhead transmission purposes: Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type) (third revision)
IEC 60208:1966
37 IS 418:2004 Tungsten filament lamps for domestic and similar general lighting purposes (fourth revision)
IEC 60064(1993)
38 IS 586:1976 Leclanche type dry batteries for telecommunications,signalling and general purposes (third revision)
39 IS 694:1990 PVC Insulated cables for working voltages upto and including 1100 V (Third revision)
IEC 60227-1to5:1979
40 IS 1175:1981 Methods for grading and classification of muscovite mica blocks, thins and films (first revision)
ISO 67
41 IS 1231:1974 Dimensions of three-phase foot-mounted induction motors (third revision)
IEC 60072 (1971)
42 IS 1248(Part 1):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 1 General requirements (fourth revision)
IEC 600 51-1(1997)
43 IS 1248(Part 2):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 2 Ammeters and voltmeters (third revision)
IEC 600 51-2(1984)
44 IS 1248(Part 3):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 3 Wattmeters and varmeters (third revision)
IEC 600 51-3(1984)
45 IS 1248(Part 4):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 4 Frequency meters (third revision)
IEC 600 51-4(1984)
46 IS 1248(Part 5):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 5 Phase meters, power factor meters and synchroscope (third revision)
IEC 600 51-5(1984)
47 IS 1248(Part 6):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 6 Ohmmeters (impedance meters) and conductance meters (third revision)
IEC 600 51-6(1984)
48 IS 1248(Part 7):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 7 Multifunction instruments (third revision)
IEC 600 51-7(1984)
49 IS 1248(Part 8):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 8 Accessories (third revision)
IEC 600 51-8(1984)
Sl. No. IS Number/ DOC Number Title ISO/IEC
50 IS 1248(Part 9):2003 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 9 Test methods (third revision)
IEC 600 51-9(1988)
51 IS 1258:2005 Bayonet lamp holders (fourth revision) IEC 61184(1997)
52 IS 1287:1993 Electric toasters (third revision) IEC 60442(1973)
53 IS 1293:2005 Plugs and socket outlets of rated voltage upto and including 250 volts and rated current upto and including 16 amperes - Specification (third revision)
IEC 60884-1 (2002)
54 IS 1356(Part 1):1972 Electrical equipment of machine tools:Part 1 Electrical equipment of machinesfor general use (second revision)
IEC 60204-1
55 IS 1534(Part 1):1977 Ballasts for fluorescent lamps:Part 1 For switch start circuits (second revision)
IEC 82(1973)
56 IS 1554(Part 1):1988 PVC insulated (heavy duty) electric cables: Part 1 For working voltages upto and including 1 100 V (third revision)
IEC 60502:1983
57 IS 1554(Part 2):1988 PVC insulated (heavy duty) electric cables:Part 2 For working voltages from 3.3kV upto and including 11 kV (Second revision)
IEC 60502:1983
58 IS 1569:1976 Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp circuits ( first revision)
IEC 566
59 IS 1709:1984 Capacitors for electric fan motors (first revision)
IEC 252:1975
60 IS 1765:1980 Direct current potentiometers (second revision)
IEC 60523:1975
61 IS 1766:1998 Time swtiches for metering and load control (second revision)
IEC 61038:1992
62 IS 1851:1997 Single Operator type arc weldingtransformers (third revision)
ISO 700:1982
63 IS 1866:2000 Code of practice for maintenance and supervision of mineral insulating oil in equipment (third revision)
IEC 60296(1982)
64 IS 2026(Part 1):2011 Power transformers: Part 1 General (first revision)
* IEC 60076-1(2000)
65 IS 2026(Part 2):2010 Power Transformers - Part 2 Temperature rise (first revision)
IEC 60076-2(1993)
66 IS 2026(Part 4):1977 Power transformers: Part 4 Terminal marking,tappings and connections (first revision)
IEC 60076(1977)
67 IS 2026(Part 5):2011 Power Transformers - Part 5 Ability to withstand short circuit (first revision)
IEC 60076-5(2006)
68 IS 2082:1993 Stationary storage type electric water heaters (fourth revision)
* IEC 60379(1982)
69 IS 2165(Part 1):1977 Insulation coordination:Part 1 Phase to earth insulation coordinationprinciples and rules (second revision)
** IEC 60071-1:1976
Sl. No. IS Number/ DOC Number Title ISO/IEC
70 IS 2165(Part 2):1983 Insulation coordination: Part 2 Phase to phase insulation coordination principles and rules
** IEC 60071-3:1982
71 IS 2215:2006 Starters for fluorescent lamps (third revision)
IEC 60155 (1993)
72 IS 2223:1983 Dimensions of flange mounted ac induction motors (first revision)
IEC 60072 (1971)
73 IS 2253:1974 Designation for types of construction and mounting arrangement of rotating electrical machines (first revision)
IEC 34-7(1972)
74 IS 2259:1963 Methods of test for determination of insulation resistance of solid insulating materials
IEC 60167(1964)
75 IS 2312:1967 Propeller type ac ventilating fans (first revision)
* IEC 60665(1981)
76 IS 2418(Part 1):1977 Tubular fluorescent lamps for general lighting service: Part 1 Requirements and tests (first revision)
IEC 81(1974)
77 IS 2418(Part 2):1977 Tubular fluorescent lamps for general lighting service : Part 2 Standard lamp data sheets (first revision)
IEC 81(1974)
78 IS 2418(Part 3):1977 Tubular fluorescent lamps for general lighting service : Part 3 Dimensions of G-5and G-13 bi-pin caps (first revision)
IEC 61-1(1969)
79 IS 2418(Part 4):1977 Tubular fluorescent lamps for general lighting service: Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)
IEC 61-3(1969)
80 IS 2419:2012 Panel Mounted Equipment — Electrical Measuring Instrument —Dimensions For Panel Mounting ( Second Revision )
IEC 61554 : 1999
81 IS 2486(Part 2):1989 Insulator fittings for overhead power lines with nominal voltage greater than1000 V - Specification : Part 2 Dimensional requirements (second revision)
IEC 120 (1984)
82 IS 2486(Part 3):1974 Specification for Insulator fittings for overhead power lines with a nominal voltage greter than 1 000 Volts: Part 3 Locking devices
IEC 372-1 (1971)
83 IS 2486(Part 4):1981 Specification for Insulator fittings for overhead power lines with a nominal voltage greater than1 000 V: Part 4 Test for locking devices
IEC 372-2 (1976)
84 IS 2511:1963 Specification for Polycrystalline semiconductor rectifier stacks
IEC 60119(1960)
85 IS 2544:1973 Porcelain post insulators for systems with nominal voltage greater than 1000 Volts (first revision)
IEC 168 (1964)
86 IS 2705(Part 1):1992 Current transformers: Part 1 General requirements (second revision)
IEC 60185(1966)
87 IS 2705(Part 2):1992 Current transformers: Part 2 Measuring current transformers (second revision)
IEC 60185(1966)
88 IS 2705(Part 3):1992 Current transformers: Part 3 Protective current transformers (second revision)
IEC 60185(1966)
Sl. No. IS Number/ DOC Number Title ISO/IEC
89 IS 2705(Part 4):1992 Current transformers: Part 4 Protective current transformers for special purpose applications (second revision)
IEC 60185(1966)
90 IS 3017:1985 Thermostats for use with electric water heaters (first revision)
IEC 60730(1982)
91 IS 3070(Part 3):1993 Lightning arresters for alternating current systems :Part 3 Metal oxide surge-arresters without gaps for ac systems
* IEC 60099-4:1991
92 IS 3136:1965 Specification for Polycrystalline semiconductor rectifier equipment
IEC 60119(1960)
93 IS 3151:1982 Earthing transformers (first revision) IEC 60289(1968)
94 IS 3156(Part 1):1992 Voltage transformers: Part 1 General requirements (second revision)
IEC 60186(1987)
95 IS 3156(Part 2):1992 Voltage transformers: Part 2 Measuring voltage transformers (second revision)
IEC 60186(1987)
96 IS 3156(Part 3):1992 Voltage transformers: Part 3 Protective voltage transformers (second revision)
IEC 60186(1987)
97 IS 3156(Part 4):1992 Voltage transformers: Part 4 Capacitor voltage transformers (second revision)
IEC 60186(1987)
98 IS 3231(Part 1/Sec 3):1986
Electrical relays for power system protection: Part 1 General requirements, Section 3 High frequency disturbance test for static relays (first revision)
IEC 255-4 (1976)
99 IS 3231(Part 2/Sec 1):1987
Electrical relays for power system protection: Part 2 Requirements for principal families, Section 1 All or nothing relays
IEC 255-1-00
100 IS 3231(Part 2/Sec 3):1987
Electrical relays for power system protection: Part 2 Requirements for principal families, Section 3 General requirements for thermal relays
IEC 255-8 (1978)
101 IS 3231(Part 3/Sec 1):1987
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 1 Non-specified time or independent specified time measuring relays
IEC 255-3 (1971)
102 IS 3231(Part 3/Sec 2):1987
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 2 Dependent specified time measuring relays
IEC 255-4 (1976)
103 IS 3231(Part 3/Sec 3):1987
Electrical relays for power system protection:Part 3 Requirements for particular group of relays, Section 3 Biased (percentage) differential relays
IEC 255-13(1980)
104 IS 3231(Part 3/Sec 4):1987
Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 4 Directional relays and power relays
IEC 255-12 (1980)
105 IS 3231(Part 3/Sec 5):1987
Electrical relays for power system Protection: Part 3 Requirements for particular group of relays, Section 5 Impedance measuring relays
IEC255-16 (1982)
106 IS 3323:1980 Bi-pin lampholders for tubular fluorescent lamps (first revision)
IEC 60400(1972)
Sl. No. IS Number/ DOC Number Title ISO/IEC
107 IS 3324:1982 Holders for starters for tubular fluorescent lamps (first revision)
IEC 400(1972)
108 IS 3716:1978 Application guide for insulation coordination (first revision)
* IEC 60071-2:1976
109 IS 3722(Part 1):1983 Letter symbols and signs used in electrical technology: Part 1 General guidance on symbols and subscripts(first revision)
IEC 60027-1(1992)
110 IS 3722(Part 2):1983 Letter symbols and signs used in electrical technology: Part 2 Reference tables for symbols and subscripts (first revision)
IEC 60273-1(92)
111 IS 3854:1997 Switches for domestic and similar purposes (second revision)
* IEC 60669-1(1998)
112 IS 3895:1966 Specification for Monocrystalline semiconductor rectifier cells and stacks
IEC 60146(1963)
113 IS 4029:2010 Guide for testing three-phase induction motors (First Revision)
114 IS 4159:2002 Mineral filled sheathed heating elements (third revision)
IEC 60335-2-73(1994)
115 IS 4160:2005 Interlocking switch socket outlets - Speification (first revision)
IEC 60884-2-6 (1997)
116 IS 4165:1991 Thermostats for general purpose electric ovens (first revision)
IEC 60730(1982)
117 IS 4289(Part 1):1984 Flexible cables for lifts and other flexible connections: Part 1 Elastomer insulated cables (first revision)
IEC 60245-5
118 IS 4289(Part 2):2000 Flexible cables for lifts and other flexible Connections:Part 2 PVC insulated cables
IEC 60227-6:1985
119 IS 4540:1968 Specification for Monocrystalline semiconductorrectifier assemblies and equipment
IEC 60146(1963)
120 IS 4559:1993 Single operator rectifier type dc arcwelding power source (second revision)
ISO 700:1982
121 IS 4889:1968 Method of determination of efficiency of rotating electrical machines
IEC 2 D
122 IS 5154:1980 Lead-acid traction batteries (first revision) IEC 254(1967)
123 IS 5350(Part 1):1970 Dimensions of indoor and outdoor porcelain post insulator and post insulator units for system with nominal voltage greater than 1000 V: Part 1 Indoor post insulators
IEC 273 (1968)
124 IS 5350(Part 3):1971 Dimensions of indoor and outdoor porcelain post insulators and post insulator units for system with nominal voltages greater than 1000 V: Part 3 Outdoor pedestal post insulators
IEC 273 (1968)
125 IS 5422:1996 Turbine type generators (first revision)* IEC 60034-3(1988)
126 IS 5553(Part 1):1989 Reactors: Part 1 General IEC 60289(1988)
127 IS 5553(Part 2):1990 Reactors: Part 2 Shunt reactors IEC 60 289(1988)
128 IS 5553(Part 3):1990 Reactors: Part 3 Current limiting reactors and neutral earthing reactors
IEC 60289(1988)
Sl. No. IS Number/ DOC Number Title ISO/IEC
129 IS 5553(Part 4):1990 Reactors: Part 4 Damping reactors IEC 60289(1988)
130 IS 5553(Part 5):1989 Reactors: Part 5 Tuning reactors IEC 60289(1988)
131 IS 5553(Part 6):1991 Reactors: Part 6 Earthing transformers (Neutral couplers)
IEC 60289(1988)
132 IS 5553(Part 7):1990 Reactors: Part 7 Arc supression reactors IEC 60289(1988)
133 IS 5553(Part 8):1990 Reactors: Part 8 Smoothing reactors IEC 60289(1988)
134 IS 5571:2009 Guide for selection and installation of electrical equipment in hazardous areas (other than mines(third revision)
IEC 60079-14(2002)
135 IS 5572:2009 Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation (third revision of IS 5572)
IEC 60079-10(2002)
136 IS 5578:1984 Guide for marking of insulated conductors (first revision)
IEC 60391(1972)
137 IS 5790:1985 Domestic electric cooking ovens (first revision)
IEC 60350
138 IS 5831:1984 PVC insulation and sheath of electric cables (first revision)
IEC 60502:1983
139 IS 6008:1989 Single operator ac/dc arc weldingpower source (first revision)
IEC 700:1982
140 IS 6162(Part 1):1971 Paper covered aluminium conductors : Part 1 Round conductors
IEC 60111
141 IS 6162(Part 2):1971 Paper covered aluminium conductors:Part 2 Rectangular conductors
IEC 60111
142 IS 6236:1971 Direct recording electrical measuring instruments
IEC 60258(1968)
143 IS 6290:1986 Steam irons (first revision) IEC 60311(1970)
144 IS 6303:1984 General requirements and methods of tests for dry cells and batteries
* IEC 86-1(1972)
145 IS 6303(Part 4):2013 Primary batteries – Part 4: Safety of lithium batteries
IEC 60086-4:2007
146 IS 6380:1984 Elastomeric insulation and sheath of electric cables (first revison)
IEC 60502:1983
147 IS 6616:1982 Ballasts for high pressure mercury vapour lamps (first revision)
IEC 262(1969)
148 IS 6680:1992 Railway carriage fans (first revision) IEC 60342-1
149 IS 6701:1985 Tungsten filament miscellaneous electric lamps (first revision)
IEC 61-1(1969)
150 IS 6792:1992 Method for determination of electric strength of insulating oils (first revision)
* IEC 60156(1963)
151 IS 6848:1979 Lead-acid batteries for train lighting and airconditioning services (first revision)
IEC 77(1968)
152 IS 7027:1984 Transistorized ballasts for fluorescent lamps (first revision)
IEC 458 (1982)
153 IS 7098(Part 1):1988 Cross-linked polyethylene insulated thermosplastic sheathed cables - Specification : Part 1 For working voltages upto and including 1 100 V (first revision)
IEC 60502:1983
Sl. No. IS Number/ DOC Number Title ISO/IEC
154 IS 7098(Part 2):2011 Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification : Part 2 For working voltages from 3.3 kV upto and including 33 kV (second revision)
IEC 60502-2:2005
155 IS 7132:1973 Guide for testing synchronous machines IEC 60034-1(1969)
156 IS 7204(Part 2):1980 Specification for Stabilized power supplies dc output: Part 2 Rating and performance .
IEC 60478-2(1975)
157 IS 7204(Part 3):1980 Specification for Stabilized power supplies dc output: Part 3 Radio frequency interference tests
IEC 60478-3(1976)
158 IS 7204(Part 4):1980 Specification for Stabilized power supplies dc output: Part 4 Tests other than radio-frequency interference.
IEC 60478-4(1976)
159 IS 7306:1974 Methods for determining synchronous machine quantities from tests
* IEC 60034-4(1967)
160 IS 7372:1995 Lead-acid storage batteries for motor vehicles (first revision)
* IEC 95-1(1988)
161 IS 7391(Part 1):1974 Cotton covered copper conductors : Part 1 Round conductors
IEC 60182
162 IS 7576:1974 Bunched enamelled copper conductors with silk covering
IEC 60317-1
163 IS 7624:1990 Lead-acid starter batteries for diesel locomotives and rail cars (first revision)
IEC 95-1(1980)
164 IS 7691:1975 Frequencies for special power applications* IEC 600113-1(71)
165 IS 7788:1975 Specification for Single-phase traction power converters
IEC 60411(1973)
166 IS 7809(Part 1):1975 Pressure sensitive adhesive tapes for electrical purposes: Part 1 General requirements
IEC 60454-1(1974)
167 IS 7809(Part 2):1977 Pressure sensitive adhesive tapes for electrical purposes: Part 2 Methods of test
IEC 60454-2(1974)
168 IS 7809(Part 3/Sec 1):1986
Pressure sensitive adhesive tapes for electrical purposes: Part 3 Requirements for individual materials, Section 1 Plasticized polyvinylchloride tapes with non-thermosetting adhesive (first revision)
IEC 60454-2
169 IS 7914:1975 Standard cells IEC 60428(1973)
170 IS 8030:1976 Luminaires for hospitals IEC 162(1972)
171 IS 8130:1984 Conductors for insulated electric cables and flexible cords (first revision)
* IEC 60228:1978
172 IS 8144:1997 Multipurpose dry batteries (First revision)* IEC 86-2(1972)
173 IS 8187:1976 D-type fuses IEC 269-3(1973)
174 IS 8223:1999 Dimensions and output series for rotating electrical machines (first revision)
IEC 60072-2(1990)
175 IS 8270(Part 1):1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 1 Definitions and classification
IEC 60113-1(71)
176 IS 8270(Part 2):1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 2 Item designation
IEC 60113-2(71)
177 IS 8270(Part 3):1977 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 3 General requirements for diagrams
IEC 60113-2(71)
Sl. No. IS Number/ DOC Number Title ISO/IEC
178 IS 8270(Part 4):1977 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 4 Circuit diagrams
IEC 60113-2(71)
179 IS 8270(Part 5):1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 5 Interconnection diagrams and tables
IEC 60113-2(71)
180 IS 8270(Part 6):1983 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 6 Unit wiring diagrams and tables
IEC 60113-2(71)
181 IS 8504(Part 1):2013 Electrical insulating materials properties of thermal endurance Part 1: Ageing procedures and evaluation of test results (Second Revision)
182 IS 8504(Part 2):2013 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (First Revision)
IEC 60216-2(2005)
183 IS 8504(Part 3):1994 Guide for determination of thermal endurance properties of electrical insulating materials Part 3 : Statistical methods
IEC 60216-3
184 IS 8504(Part 4):2013 Electrical insulating materials - Thermal endurance properties - Part 4: Instructions for calculating thermal endurance characteristics (First Revision)
IEC 60216-3(2006)
185 IS 8504(Part 5/Sec 1):2012
Electrical insulating materials - Thermal endurance properties - Part 5 Ageing ovens Sec 1 Single-chamber ovens
IEC 60216-4-1(2006)
186 IS 8504(Part 5/Sec 2):2012
Electrical insulating materials - Thermal endurance properties - Part 5: Ageing ovens Sec 2 Precision ovens for use up to 300 °C
IEC 60216-4-2(2000)
187 IS 8504(Part 5/Sec 3):2012
Electrical insulating materials - Thermal endurance properties - Part 5 Ageing ovens Sec 3 Multi-chamber ovens
IEC 60216-4-3(2000)
188 IS 8504(Part 6):2012 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60216-5(2008)
189 IS 8504(Part 7):2012 Electrical insulating materials - Thermal endurance properties - Part 7 : Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
IEC 60216-6(2006)
190 IS 8530:1977 Maximum demand indicators (class 1) IEC 60211:1966
191 IS 8685:1977 Aircraft lamps IEC 60434 (1973)
192 IS 8686:1977 Static protective relays IEC 255-4
193 IS 8704:1995 Artificial pollution on high voltage insulators to be used on ac systems (first revision)
IEC 507 (1991)
194 IS 8804:1993 Plugs, sockets and terminal arrangementsand welding cable connectors for manual welding equipment (first revision)
IEC 501:1975
195 IS 8913:1978 Methods of measurement of lamp cap temperature rise
IEC 360(1971)
Sl. No. IS Number/ DOC Number Title ISO/IEC
196 IS 8992:1978 Test methods for induction furnaces with submerged channels
IEC 60396(1972)
197 IS 9021:1978 General test conditions for industrial electro-heating equipment
IEC 60398(1972)
198 IS 9029:1978 Methods of tests for batch furnaces with metallic heating resistors
IEC 60397(1972)
199 IS 9043:1979 Method for grading (by size) of phlogopite mica blocks, thins and splittings
ISO 444(1965)
200 IS 9044:1979 Method of measuring thickness of mica blocks, thins, films and splittings
ISO 5972(1978)
201 IS 9045:1979 Thermal classification of phlogopite mica splittings
ISO 5023(1977)
202 IS 9050:1979 Nominal dimensions of cylindrical machines graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces.
** IEC 60239(1967)
203 IS 9080(Part 2/Sec 1):1979
Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment,Section 1 Protection in directresistance heating installations
** IEC 60519-2(1975)
204 IS 9080(Part 2/Sec 3):1981
Safety requirements in electro-heat installations:Part 2 Particular requirements for resistance heating equipment,Section 3 Protection in potassium and sodium nitrate and nitrite bath furnaces
** IEC 60519-2(1975)
205 IS 9080(Part 2/Sec 4):1981
Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment, Section 4 Protection in installations used for drying varnishes and other similar products
** IEC 60519-2(1975)
206 IS 9080(Part 4):1981 Safety requirements in electro-heat installations:Part 4 Particular requirements for arc furnace installations.
** IEC 60519-4(1977)
207 IS 9206:1979 Dimensions of caps for tungsten filament general service electric lamps
IEC 60061-1(1969)
208 IS 9249(Part 1):1979 Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 1 Common safety requirements for instruments
IEC 60414(1973)
209 IS 9249(Part 2):1982 Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 2 Safety requirements for instruments using a mains supply
IEC 60414((1973)
210 IS 9251:1979 Capacitors for inductive heat generating plants operating at frequencies between 40 and 24 000 Hz
IEC 60110:1973
211 IS 9335(Part 1):1979 Cellulosic papers for electrical purposes: Part 1 Definitions and general requirements
IEC 60554-1(1977)
Sl. No. IS Number/ DOC Number Title ISO/IEC
212 IS 9335(Part 3/Sec 1):1984
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 1 General purposes electrical paper
IEC 60554-3-1
213 IS 9335(Part 3/Sec 2):1985
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 2 Capacitor paper
IEC 60554-3-2
214 IS 9335(Part 3/Sec 3):1984
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 3 Crepe paper
IEC 60554-3-3(1980)
215 IS 9335(Part 3/Sec 4):1984
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 4 Electrolytic capacitor paper
IEC 60554-3-4(1979)
216 IS 9335(Part 3/Sec 5):1985
Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 5 Special papers
IEC 60554-3-5
217 IS 9385(Part 1):1979 High voltage fuses:Part 1 Current limiting fuses
IEC 282-1(1979)
218 IS 9385(Part 2):1980 High voltage fuses:Part 2 Expulsion and similar fuses (superseding IS:5792)
IEC 282-2(1970)
219 IS 9385(Part 3):1980 High voltage fuses:Part 3 Application guide for high voltage fuses
IEC 282-2(1970)
220 IS 9385(Part 5):1983 High voltage fuses:Part 5 Types and dimensions of fuse-links for current limiting fuses
IEC 282-1A(1978)
221 IS 9402:1980 High voltage fuses for the external protection of shunt power capacitors
IEC 549(1976)
222 IS 9409:1980 Classification of electrical and electronic equipment with regard to protection against electric shock
IEC 61140 (2001)
223 IS 9434:1992 Guide for sampling and analysis of free and dissolved gases and oil from oil-filled electrical equipment (first revision)
* IEC 60567(1977)
224 IS 9499:1980 Conventions concerning electric and magnetic circuits
IEC 60375(72)2003
225 IS 9502:1980 Muscovite mica components for electronic equipment
ISO 5816-1(1979)
226 IS 9537(Part 1):1980 Conduits for electrical installations: Part 1 General requirements
* IEC 60614-1(1978)
227 IS 9537(Part 3):1983 Conduits for electrical installations: Part 3 Rigid plain conduits of insulating materials (superseding IS:2509)
** IEC 60614-2-2(1980)
228 IS 9537(Part 5):2000 Conduits for a electrical installations: Part 5 Pliable conduits of insulating material (Superseding IS 6946)
* IEC 60614-2-3(1990)
229 IS 9537(Part 6):2000 Conduit for electrical installations: Part 6 Pliable conduits of metal or composit materials
IEC 60614-2-6(1992)
230 IS 9583:1981 Emergency lighting units IEC 598-2-22(1980)
231 IS 9857:1990 Welding cables (first revision) IEC 60245-6
232 IS 9900(Part 1):1981 High pressure mercury vapour lamps:Part 1 Requirements and test (Superseding IS:2183 and IS:7023)
IEC 188(1974)
Sl. No. IS Number/ DOC Number Title ISO/IEC
233 IS 9900(Part 2):1981 High pressure mercury vapour lamps: Part 2 Standard lamp data sheets (superseding IS: 2183 and IS: 7023)
IEC 188(1974)
234 IS 9900(Part 3):1981 High pressure mercury vapour lamps :Part 3 Dimensions of lamp caps(superseding IS:2183 and IS:7023)
IEC 188(1974)
235 IS 9900(Part 4):1981 High pressure mercury vapour lamps :Part 4 Go and no-go gauges of lamp caps(superseding IS:2183 and IS:7023)
IEC 61-3(1969)
236 IS 9920(Part 3):1982 Switches and switch isolators for voltages above 1000 V: Part 3 Design and construction
* IEC 60129:1975
237 IS 9920(Part 4):1985 Switches and switch isolators for voltages above 1000 V: Part 4 Type tests and routine tests
* IEC 60129:1975
238 IS 9921(Part 1):1981 Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 1 General and definitions
* IEC 60129:1975
239 IS 9921(Part 2):1982 Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 2 Rating
* IEC 60129:1975
240 IS 9921(Part 3):1982 Alternating current disconnectors (isolators and earthing switches for voltages above 1 000 V: Part 3 Design and construction
* IEC 60129:1975
241 IS 9921(Part 4):1985 Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 4 Type tests and routine tests
* IEC 60129:1975
242 IS 9921(Part 5):1985 Alternating current disconnectors (isolators) and earthing switches for voltages above 1 000 V: Part 5 Information to be given with tenders, inquiries and orders
* IEC 60129:1975
243 IS 9974(Part 1):1981 High pressure sodium vapour lamps :Part 1 General requirements and tests
IEC 662(1980)
244 IS 9974(Part 2):1981 High pressure sodium vapour lamps :Part 2 Standard lamp data sheets
IEC 662(1980)
245 IS 10026(Part 1):1998 Insulating varnishes containing solvents: Part 1 Definitions and general requirements (first revision)
* IEC 60464-1(1976)
246 IS 10026(Part 2):1999 Insulating varnishes containing solvents: Part 2 Methods of tests(first revision)
* IEC 60464-2(19860
247 IS 10026(Part 3/Sec 1):1999
Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section1Requirements for cold curing varnishes(first revision)
* IEC 60464-3-1(1986)
248 IS 10026(Part 3/Sec 2):1999
Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 2 Requirements for hot curing varnishes(first revision)
* IEC 60464-3-2(1989)
249 IS 10031:1981 Taper barrelled delivery spools for covered round electrical winding wires
IEC 60264-3(1973)
Sl. No. IS Number/ DOC Number Title ISO/IEC
250 IS 10098:1982 General requirements for electric infra-red emitters for heating purposes.
IEC 60240(1967)
251 IS 10122:1982 Methods of tests for crucible induction furnaces
** IEC 60545(1979)
252 IS 10163(Part 1):1982 Recommended methods of tests for the determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1 General
IEC 60377-1(1973)
253 IS 10189(Part 2/Sec 1):1993
Industrial process control valves: Part 2 Flow capacity, Section 1 Sizing equations for incompressible fluid flow under installed conditions
* IEC 60534-2-1(1978)
254 IS 10189(Part 2/Sec 2):1993
Industrial process control valves: Part 2 Flow capacity SectIon 2 Sizing equations for compressible fluid flow under installed conditions
** IEC60534-2-2(1980)
255 IS 10215:1982 Methods of tests for submerged arc furnaces
** IEC 60683(1980)
256 IS 10242(Part 1/Sec 1):1997
Electrical installations in ships: Part 1 General, Section 1 Definitions and general requirements (first revision)
IEC 60092-101:1980
257 IS 10242(Part 2/Sec 1):1982
Electrical installations in ships: Part 2 System design, Section 1 General
* IEC 60092-201:1980
258 IS 10242(Part 2/Sec 2):1983
Electrical installations in ships: Part 2 System design, Section 2 Protection
IEC 60092-202:1980
259 IS 10242(Part 2/Sec 4):1993
Electrical installationss in ships: Part 2 System design, Sec 4 Electric and electrohydraulic steering gear
IEC 60092-204:1987
260 IS 10242(Part 3/Sec 1):1983
Electrical installations in ships: Part 3 Equipment, Section 1 Generators and motors
IEC 60092-301:1980
261 IS 10242(Part 3/Sec 2):1984
Electrical installations in ships: Part 3 Equipment, Section 2 Switchgear and controlgear assemblies
IEC 60092-302:1980
262 IS 10242(Part 3/Sec 3):1984
Electrical installations in ships: Part 3 Equipment, Section 3 Transformers for power and lighting
IEC 60092-303:1980
263 IS 10242(Part 3/Sec 4):1987
Electrical installations in ships: Part 3 Equipment, Section 4 Semi-conductor convertors
IEC 60092-304:1980
264 IS 10242(Part 3/Sec 5):1990
Electrical installations inn ships: Part 3 Equipment, Section 5 Accumulators (storage) batteries
IEC 60092-305:1980
265 IS 10242(Part 3/Sec 6):1986
Electrical installations in ships: Part 3 Equipment, Section 6 Luminaires and accessories
IEC 60092-306:1980
266 IS 10242(Part 3/Sec 7):1990
Electrical installations in ships:Part 3 Equipment, Section 7 Heating and cooking appliances
IEC 60092-307:1980
267 IS 10242(Part 3/Sec 10):1992
Electrical installations in ships: Part 3 Equipment, Section 10 General construction and test requirements for low voltage shipboard power cables
IEC 60092-350
268 IS 10242(Part 3/Sec 11):1986
Electrical installations in ships: Part 3 Equipment, Section 11 Insulating materials for shipboard power cables
IEC 60092-35:1983
Sl. No. IS Number/ DOC Number Title ISO/IEC
269 IS 10242(Part 3/Sec 12):1986
Electrical installations in ships: Part 3 Equipment, Section 12 Choice and installation of cables for low voltage systems
IEC 60092-352:1979
270 IS 10242(Part 3/Sec 13):1992
Electrical installations in ships: Part 3 Equipment, Section 13 Single and multicore cables with extruded solid insulation for rated voltage 0.6/1 kV
IEC 60092-353:1988
271 IS 10242(Part 3/Sec 19):1990
Electrical installations in ships: Part 3 Equipment, Section 19 Sheathing materials for telecommunication and power shipboard cables
IEC 60092-359:1987
272 IS 10242(Part 3/Sec 23):1987
Electrical installations in ships: Part 3 Equipment, Section 23 Shipboard telecommunication cables and radio frequency cables: Shipboard flexible coaxial cables
IEC 60092-373:1977
273 IS 10242(Part 3/Sec 24):1987
Electrical installations in ships: Part 3 Equipment, Section 24 Shipboard telecommunication cables and radiofrequency cables: Telephone cables for non-essential communication services
IEC 60092-374:1977
274 IS 10242(Part 3/Sec 25):1987
Electrical installations in ships: Part 3 Equipment, Section 25 Shipboard telecommunication cables and radio frequency cables: General instrumentation, control and communication cables
IEC 60092-375:1977
275 IS 10242(Part 3/Sec 26):1987
Electrical installations in ships: Part 3 Equipment, Section 26 Shipboard telecommunication cables: Shipboard multicore cables for control circuits
IEC 60092-376:1983
276 IS 10242(Part 4):1992 Electrical installations in ships: Part 4 Installation and test of completed installation
IEC 60092-401:1980
277 IS 10242(Part 5/Sec 1):1993
Electrical installations in ships: Part 5 Special features, Sec 1 Electric propulsion plant
IEC 60092-501:1984
278 IS 10242(Part 5/Sec 2):1997
Electrical installations in ships: Part 5 Special features, Section 2 Tankers
* IEC 60092-502:1999
279 IS 10242(Part 5/Sec 3):1993
Electrical installations in ships: Part 5 Special features Sec 3 ac supply system with voltage in the range above 1 kV up to and including 11 kV
IEC 60092-503:1975
280 IS 10242(Part 5/Sec 4):1998
Electrical installations in ships : Part 5 Special features, Section 4 Control and instruments
IEC 60092-504:2001
281 IS 10276(Part 1):1982 Edison screw lampholders : Part 1 Requirements and tests
IEC 60238(1975)
282 IS 10276(Part 2):1982 Edison screw lampholders : Part 2 Standard data sheets for lamp holders and gauges
IEC 60238(1975)
283 IS 10322(Part 1):1982 Luminaires: Part 1 General requirements* IEC 598-1(1979)
284 IS 10322(Part 2):1982 Luminaires: Part 2 Constructional requirements
IEC 598-1(1979)
285 IS 10322(Part 4):1984 Luminaires: Part 4 Methods of tests IEC 598-1(1979)
Sl. No. IS Number/ DOC Number Title ISO/IEC
286 IS 10322(Part 5/Sec 1):2012
Luminaires: Part 5 Particular requirements, Sec 1 Fixed general purpose luminaires (First revision)
IEC 60598-2-1(1979)
287 IS 10322(Part 5/Sec 2):2012
Luminaires: Part 5 Particular requirements, Sec 2 Recessed luminaires (First revision)
IEC 60598-2-2 (1979)
288 IS 10322(Part 5/Sec 3):2012
Luminaires: Part 5 Particular requirements, Sec 3 Luminaires for road and street lighting (First revision)
IEC 60598-2-3 (1979)
289 IS 10322(Part 5/Sec 4):1987
Luminaires: Part 5 Particular requirements,Section 4 Portable general purpose luminaires
IEC 60598-2-4(1979)
290 IS 10322(Part 5/Sec 5):1987
Luminaires: Part 5 Particular requirements, Section 5 Flood lights (superseding IS:1947)
IEC 60598-2-5
291 IS 10436:1983 Electric frying pans and deep fat fryers IEC 60335-2-13
292 IS 10462(Part 1):1983 Fictitious calculation method for determination of dimensions of protective coverings of cables:Part 1 Elastomeric and thermoplastic insulated cables
IEC 60502:1978
293 IS 10462(Part 2):1991 Fictitious calculation method for determination of dimensions of protective coverings of cables: Part 2 Paper insulated cables
IEC 60055-2
294 IS 10561:1983 Application guide for power transformers IEC 606 (1978)
295 IS 10581:1983 Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids
IEC 60589(1977)
296 IS 10624:1983 High voltage fuse-links for motor circuit applications
IEC 644(1979)
297 IS 10659:1983 Specification for Direct current bridges for measuring resistance (superseding IS:1565)
IEC 60564(1977)
298 IS 10918:1984 Vented type nickel cadmium batteries IEC 623(1978)
299 IS 11064:1984 Guide for construction and use of rooms or buildings protected by pressurization for installation of electrical apparatus for explosive gas atmospheres
* IEC 60079-13(1982)
300 IS 11171:1985 Dry type power transformers IEC 60726(1982)
301 IS 11182(Part 1):1984 Guide for evaluation of insulation systems of electrical equipment: Part 1 Identification, evaluation and ageing mechanisms
IEC 60505(1975)
302 IS 11182(Part 2):1984 Guide for evaluation of insulation systems of electrical equipment: Part 2 Thermal endurance test procedure
IEC 60611(1978)
303 IS 11182(Part 3/Sec 1):1986
Guide for evaluation of insulation systems of electrical equipment: Part 3 Electrical endurance test procedures, Section 1 General considerations and evaluation procedures based on normal distributions
IEC 60727-1(1982)
Sl. No. IS Number/ DOC Number Title ISO/IEC
304 IS 11182(Part 3/Sec 2):1996
Guide for evaluation of insulation systems of electrical equipments: Part 3 Electrical endurance test procedures Section 2 evaluation procedure based on extreme value distribution
IEC 60727-2(1993)
305 IS 11221:1984 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
IEC 60343(1970)
306 IS 11256(Part 1):1985 Method of test for determination of thermal endurance of insulating varnishes: Part 1 Electric strength method
IEC 60370(1971)
307 IS 11256(Part 3):1985 Methods of test for determination of thermal endurance of insulating varnishes: Part 3 Bond strength by helical coil method
IEC 60290(1969)
308 IS 11260(Part 1):1985 Specification for Stabilized power supplies ac output:Part 1Ratings and performance .
IEC 60686(1980)
309 IS 11260(Part 2):1985 Specification for Stabilized power supplies ac output:Part 2 Tests
IEC 60686 (1980)
310 IS 11298(Part 1):1985 Plastic films for electrical purposes: Part 1 Definitions and general requirements
IEC 60674-1(1980)
311 IS 11322:1985 Method for partial discharge measurement in instrument transformers
IEC 44-4 (1980)
312 IS 11353:1985 Guide for uniform system of marking and identification of conductors and apparatus terminals
IEC 60445(1973)
313 IS 11354:1985 Guide for identification by hour numbers of the phase conductors of 3-phase electric systems
IEC 60152(63)
314 IS 11530:1985 Voltage grading capacitor IEC 60358 :1990
315 IS 11654(Part 1):1986 Flexible insulating sleeving: Part 1 Definitions and general requirements
IEC 60684-1(1980)
316 IS 11675:1986 Button cells - Silver oxide IEC 86-2(1982)
317 IS 11676:1995 Microwave ovens for household and similar purposes
IEC 60705(1988)
318 IS 11692:1986 Method of tests for electro-slag remelting furnaces
IEC 27(CO)60
319 IS 11712:1986 Safety requirements for electro-slag remelting furnaces.
IEC 27(CO)1959
320 IS 11731(Part 1):1986 Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 1 Horizontal specimen method
IEC 60107(1981)
321 IS 11731(Part 2):1986 Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 2 Vertical specimen method
IEC 60707(1981)
322 IS 11755:1986 Method of test for determination of electrical resistance and resistivity of insulating materials at elevated temperatures
IEC 60345(1971)
323 IS 11756:1986 Method of test for co-efficients of friction of plastic film and sheeting for use as electrical insulation
IEC 60648(1979)
Sl. No. IS Number/ DOC Number Title ISO/IEC
324 IS 11955:1987 Preferred current ratings IEC 60059(1999)
325 IS 12026(Part 1):1986 Guide for the determination of the aromatic hydrocarbon content of new insulating oils: Part 1 Absorption chromatographic method
IEC 60590(1977)
326 IS 12065:1987 Permissible limits of noise level for rotating electrical machines
* IEC 60034-9
327 IS 12075:2008 Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher-measurement, evaluation and limits of vibration severity (first revision)
*
328 IS 12083(Part 1):1986 Electrical relays: Part 1 Contact performance
IEC 255-0-20 (1974)
329 IS 12083(Part 2):1986 Electrical relays: Part 2 Insulation tests IEC 255-5 (1977)
330 IS 12289:1988 Hand held electric engraving tools IEC 60745-1
331 IS 12312:1987 Inductive voltage dividers IEC 60618
332 IS 12317(Part 1):1988 Ceramic and glass insulating materials for telecommunication and allied purposes: Part 1 General requirements and classification of ceramic and glass insulating materials
IEC 60672-1(1980)
333 IS 12346:1999 Testing equipment for ac electrical energy meters(first revision)
IEC 60736:1982
334 IS 12360:1988 Voltage bands for electrical installations including preferred voltages and frequency (superseding IS:585)
IEC 60038(1983)
335 IS 12422:1988 Test method for oxidation stability of inhibited mineral insulating oils
* IEC 60474(1977)
336 IS 12449(Part 1):1988 Starting devices (other than glow starters):Part 1 General and safety requirements
IEC 60926 (1995)
337 IS 12449(Part 2):1988 Starting devices (other than glow starters):Part 2 Performance requirements
IEC 60927 (1996)
338 IS 12615:2011 Energy Efficient Three Phase Squirrel Cage Induction Motors (Second Revision)
339 IS 12642:1989 Brush-holders for slip rings group R-Type RA
IEC 60778
340 IS 12677:1989 Internal fuses for series capacitors IEC 60595:1977
341 IS 12730:1989 Internal fuses and internal overpressure disconnectorsfor capacitors for inductive heat generating plants
IEC 60594:1977
342 IS 12948:1990 Tungsten halogen lamps (non-vehicle) IEC 60357(1982)
343 IS 13010:2002 AC watt-hour meters, Class 0.5, 1 and 2(first revision)
** IEC 60521:1988
344 IS 13021(Part 1):1991 AC supplied electronic ballasts for tubular florescent lamps: Part 1 General and safety requirements
IEC 60928(1990)
345 IS 13021(Part 2):1991 AC supplied electronic ballasts for tubular florescent lamps: Part 2 Performance requirements
IEC 60929(1990)
346 IS 13203:1991 Method for verifying accuracy of tan-delta measuremnts
IEC 60996:1989
347 IS 13263:1992 Methods of test for plasma equipment for electroheat installations.
IEC 60680(1980)
Sl. No. IS Number/ DOC Number Title ISO/IEC
348 IS 13315:1992 Nickel -cadmium batteries for electric locomotives
IEC 623(1983)
349 IS 13341:1992 Requirements for ageing test, self-healing test and destruction test on shunt capacitors of the self-healing type for ac power systems having a rated voltage upto and including 650 V
IEC 60831-2:1988
350 IS 13364(Part 1):1992 Specification for ac generators driven by reciprocating internal combustion engine: Part 1 Rated up to 20 kVA
IEC 60034-1
351 IS 13364(Part 2):1992 Specification for ac generators driven by reciprocating internal combustion engine: Part 2 Rated above 20 kVA and upto 1250 kVA
IEC 60341(1983)
352 IS 13466:1992 Specification for brushes for electrical machines [superseding IS:3003 (Parts 3 and 4)-1977]
IEC 60136, 467, 773
353 IS 13508:1992 Test procedure for measurement of loss of tangent angle of coils and bars for machine winding-guide
IEC 60894(1987)
354 IS 13529:1992 Guide on effects of unbalanced voltages on the performance of three-phase cage induction motors
* IEC 600892(1987)
355 IS 13580:1992 Internal fuses and internal overpressure disconnectors for power electronic capacitors
IEC 60594:1977
356 IS 13584:1993 Specification for brush materials for electrical machinery [Superseding IS 3003(Part 2):1977]
IEC 413(1972)
357 IS 13585(Part 1):2012 Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 1 General - performance, - Guide for installation and operation (first revision of IS 13585 (Part 1) (IEC 60931-1:1996)
IEC 60931-1:1996
358 IS 13586:1993 Definitions and nomenclature for carbon brushes, brush holders, commutators and slip rings for rotating electrical machinery (superseding IS:3003(Part 1)-1977)
IEC 276(1968)
359 IS 13631:2000 Method of test for detection and determination of antioxidant additives in insulating oils
* IEC 60666(1979)
360 IS 13648:1993 Power electronics capacitors IEC 61071-1:1991
361 IS 13779:1999 AC static watthour meters (Class 1 and 2)(first revision)
** IEC 61036:1996
362 IS 13886:1993 Bimetallic thermostats and thermal cutouts for use with electric irons
IEC 60730(1892)
363 IS 13925(Part 1):2012 Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 1General performance, testing and rating safety requirements - Guide for installation and operation (superseding IS 2834:1986)(First Revision)
IEC 60871-1:2005
364 IS 13964:1994 Methods of measurement of transformer and reactor sound levels
IEC 551 (1976)
365 IS 14122:1994 Built in thermal protection for electric motors rated up to 660 V ac
IEC 60034-11(1978)
Sl. No. IS Number/ DOC Number Title ISO/IEC
366 IS 14144:1994 Electric coffee makers (Superseding IS 3514)
IEC 60661(1980)
367 IS 14155:1994 Domestic electric clothes washing machines for domestic use [Superseding IS 6390(Part 1):1983 and IS 6390 (Part 3): 1992]
IEC 60456(1974)
368 IS 14218:1994 Sealed cylindrical type rechargeable nickel cadmium cells
IEC 285(1983)
369 IS 14256:1995 Rating specification for semiconductor power converters for adjustable speed electric drive systems - particularly for DC motor drives.
IEC 61136-1(1992)
370 IS 14257:1995 Lead-acid storage batteries for motor vehicles with light weight and high cranking performance
IEC 95-1(1988)
371 IS 14376:1996 Brush holders for electrical machines IEC 136(1986)
372 IS 14415:1997 Volt-Amphere hour meters for restricted power factor range - specification [superseding IS:722 (Part 5):1980
IEC 60211:1996
373 IS 14451(Part 1):1998 Telemetering of consumption and demand:Part 1 Impulse transmitting and receiving devices
IEC 60338:1970
374 IS 14451(Part 2):1999 Telemetering for Consumption and Demands Part 2 Direct digital transfer of meter values
IEC 60338:1970
375 IS 14479:1997 Electromagnetic compatibility of electrical and electronic installation in ships
IEC 60 533:1999
376 IS 14697:1999 ac static transformer operated watthour and var-hour meters, class 0.2S and .5S-Specification
** IEC 60687:1992
377 IS 14763:2000 Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60423(1993)
378 IS 14768(Part 1):2000 Conduit fittings for electrical installations :Part 1 General requirements
IEC 61035-1(1990)
379 IS 14768(Part 2):2003 Conduit fittings for electrical installations : Part 2 Metal conduit fittings (superseding IS 2667)
IEC 61035-2-1(1993)
380 IS 14772:2000 Enclosures for accessories for household and similar fixed electrical installations (Superseding IS 5133(Part 1 and 2)
IEC 60670-1(1989)
381 IS 14774(Part 1):2000 Resistance trace heating in potentially explosive atmospheres: Part 1 General and testing requirements
* IEC 62086-1
382 IS 14774(Part 2):2000 Resistance trace heating in potentially explosive atmospheres: Part 2 Informative application guide for design, installation and maintenance
IEC 62086-2
383 IS 14897:2000 Glass bulb designation system for lamps-Guide
IEC 60887(1988)
384 IS 14927(Part 1):2001 Cable trunking and ducting systems for electrical installations :Part 1 General requirements
IEC 61084-1(1991)
Sl. No. IS Number/ DOC Number Title ISO/IEC
385 IS 14927(Part 2):2001 Cable trunking and ducting systems for electrical installations: Part 2 Cable trunking and ducting systems instended for mounting on walls or ceilings
IEC 61084-2-1(1996)
386 IS 14930(Part 1):2001 Conduit systems for electrical installations :Part 1 General requirements
IEC 61386-1(1996)
387 IS 14930(Part 2):2001 Conduit systems for electrical installations :Part 2 Particular requirements for conduit system buried underground
IEC 61386-2(1995)
388 IS 15063:2001 Alkaline manganese dioxide cells IEC 86-2(1994)
389 IS 15086(Part 3):2003 Surge arresters: Part 3 Artificial pollution testing of surge arresters
IEC 60099-3:1990
390 IS 15111(Part 1):2002 Self ballasted lamps for general lighting services :Part 1 Safety requirements
IEC 60968(1988)
391 IS 15111(Part 2):2002 Self ballasted lamps for general lighting services :Part 2 Performance requirements
IEC 60969(1988)
392 IS 15518(Part 1):2004 Safety requirements for incandescent lamps : Part 1 Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1 (1999)
393 IS 15687(Part 1):2006 Single-capped fluorescent lamps: Part 1 Safety requirements
IEC 61199 (1999)
394 IS 15787:2008 Switch- socket outlets (Non-Interlock Type) IEC 60884-2-3 (1989)
395 IS 15885(Part 2/Sec 1):2011
Safety of lamp controlgear: Part 2 Particular requirements, Sec 1 Starting devices (other than glow starters
IEC 61347-2-1 (2000)
396 IS 15885(Part 2/Sec 3):2011
Safety of lamp controlgear: Part 2 Particular requirements, Sec 3 ac supplied electronic ballasts for fluorescent lamps
IEC 61347-2-3 (2000)
397 IS 15885(Part 2/Sec 8):2011
Safety of lamp controlgear: Part 2 Particular requirements, Sec 8 Ballasts for fluorescent lamps
IEC 61347-2-8 (2000)
398 IS 15885(Part 2/Sec 9):2011
Safety of lamp controlgear: Part 2 Particular requirements, Sec 9 Ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9 (2000)
399 IS 60320(Part 2/Sec 3):2007
Appliance couplers for household and similar general purposes- part 2-3 Appliance coupler with a degree of protection higher IPXO
IEC 60320-2-3(1998)
Total : EQUIVALENT STANDARDS = 399
BILINGUAL STANDARDS
ANNEX 3
Sl. No. IS Number/ DOC Number Title
1 IS 2412:1975 Link clips for electrical wiring (first revision)
2 IS 12762(Part 9):2010 Photovoltaic devices: Part 9 Solar simulator performance requirments
ANNEX 4
ASPECT WISE POSITION OF STANDARDS
PRODUCT : 882
METHODS OF TEST : 220
CODE OF PRACTICES : 150
TERMINOLOGY : 57
DIMENSION : 47
SYMBOLS : 19
OTHERS : 71
TOTAL : 1446
top related