ltk48 coring system - drillersworld.com.au · the field proven, ltk48 thin kerf conventional coring...
Post on 31-Mar-2020
3 Views
Preview:
TRANSCRIPT
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Diamond Products
Core Barrels
Drill Rods
Water Swivels
Casing
Recovery Tools
Adapter Subs
Tools
Technical Data
Safety Poster
REV 01-DEC-04
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Diamond Products
Impregnated Bits
Reaming Shells
Casing Shoes
Casing Bits
Bit and Shell Gauges
Options and SpecialtyDiamond Products
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Waterway
Drilling Fluid
Core Lifter Case
Bit
Boart Longyear introduces metal coated diamond impregnated bits -the latest in industrial diamond technology.• Significantly outperforms the successful Series range in both drilling
speed and bit life.• Protects the diamond from oxidation and surface degradation
during manufacturing.• Inhibits the premature "pull-out" of the diamond.• Increases the number of cutting edges exposed to the rock.• Available in multiple standard configurations and selected on the
basis of relative rock hardness and ground conditions.
Impregnated Bits
* Available on special request.
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual or the Diamond Products FieldManual for additional operating information.
Impregnated BitsStandard Reaming ShellGeometry Geometry
Alpha01 * *Alpha01 Abrasive * *Alpha02 4051624 4050408Alpha04 4052000 *Alpha06 4051508 *Alpha06 Abrasive * *Alpha07 4052282 *Alpha07 Abrasive 4051323 *Alpha07 Competent 4051525 *Alpha08 4052283 4050409Alpha08 Abrasive 4052120 *Alpha08 Competent 4051562 *Alpha09 4051869 *Alpha09 Competent 4051892 *Alpha10 4052036 4050356Alpha10 Competent * *
Standard: Designed to handle a wide variety of formations.
Abrasive: Recommended for broken "abrasive" drilling condtions. Forharder rock with broken conditions use a higher number bit tomaintain good drilling speeds.
Competent: Free cutting design for fast penetration in very hard"competent" rock or for use on lower powered rigs and geotechnicalapplications.
Express Geometry: Bits are supplied with additional intermediatewaterways which provide increased flushing. The reduced bit facearea allows for higher penetration rates with less bit weight required.Recommended when polishing occurs with standard geometry.
NOTE: "Standard Gauge" bits are defined as having a set outsidediameter which is 0.25mm (0.010") smaller than "ReamingShell Gauge". For more detailed information on "StandardGauge vs Reaming Shell Gauge" impregnated bits, refer tothe ITHT Product Manual.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Reaming Shells
The recommended practice is to alternate two reaming shells in eachhole drilled to maintain hole diameter. Upon bit changes, the reamingshell should be checked for wear with the bit and shell wear gauge.Failure to observe these recommended practices will result in either apoorly stabilized bit or an undersized hole that will require costlyreaming.
** Available on special request.
NOTE: Refer to the ITHT Product Manual or the Diamond ProductsField Manual for additional operating information.
Reaming Shells
LTK48 Standard 3522847LTK48 Stabilized 3522846
Reaming Shells - Sourced from Australasia
LTK48 Heavy Duty Impregnated 4101435LTK48 Surface Set 4101849LTK48 Rod Line Surface Set **
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing Shoes
Casing Shoes
AW V-Ring 508430
Casing ShoeThe inside diameter of the casing shoe is not set with diamonds andis flush with the inside diameter of the casing, permitting free passageof the core barrel past the casing shoe.
Applications:• The casing shoe is threaded to the end of the casing string for
penetration through overburden.• Assists in seating the casing into the bedrock, providing a tight
seal for the drilling fluids to flow through to the surface.• Used to ream the casing downward when advancing a casing
string in an existing hole with the rod string still in place.
NOTE: Refer to the ITHT Product Manual or the Diamond ProductsField Manual for additional operating information.
Casing Shoes - Sourced from Australasia
AW Impregnated 4104985
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing Bits
Casing Bits
AW V-Ring Casing Bit 509150
Casing BitThe inside diameter of the casing bit is set with diamonds and issmaller than the casing shoe. It will not permit the passage of thecore barrel.
Applications:• Used when deep or difficult overburden is encountered.• When reaming operations are completed, the casing string is
removed from the hole and a casing shoe is substituted for acasing bit before normal drilling operations recommence.
NOTE: Refer to the ITHT Product Manual or the Diamond ProductsField Manual for additional operating information.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Bit and Shell Gauge
Bit and Shell Gauge
AQTK/LTK48 Bit and Shell Wear Gauge 30003
Bit and Shell Wear GaugeAs good practice, the diameter of impregnated bits and reamingshells should be measured. This will ensure that the hole size ismaintained. Impregnated bits typically maintain their gauge untiltotally consumed.All holes should be collared with a full gauge reaming shell. Ondeeper holes, two or more shells should be alternated in the hole tomaintain the hole size. Reaming shells should be gauged frequentlythroughout drilling operations to avoid costly reaming of undersizedholes.
NOTE: Refer to the ITHT Product Manual or the Diamond ProductsField Manual for additional operating information.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Options and Specialty Diamond Products
Corrugated or Flat FaceFor impregnated bits with a kerf width over 7.5mm (0.30”) thestandard crown profile is corrugated, and flat for kerf widths equal toor under 7.5mm (0.30”).
Non-Coring BitsTheir design provides reinforcement of the center of the bit to preventexcessive wear of this critical area. Various center designs, includingpencil core and crowsfoot types, are available to suit your particularneeds. Water courses are carefully engineered to provide fast andcomplete evacuation of the cuttings produced by this type of tool,thereby increasing the penetration rates in all types of formations andincreasing bit life. Other non-coring bits are available for hydroelectricgrouting applications including non-coring TSD bits.
Specialty ProductsBoart Longyear manufactures other special products such aspolishing bits and hole openers to complete the diamond product line.Contact your Boart Longyear representative for more information.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Core Barrels
ConventionalLTK48
Packaging Information
Assembly Instructions
NOTE: All core barrels will require someassembly upon receipt of shipment.Please refer to Packaging Information andAssembly Instruction sections.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Core Barrels - LTK48
LTK48 Core Barrel
Head Assembly
Inner Tube Components
Outer Tube Components
Extended Core Barrels
Spare Parts Kit
NOTE: All core barrels will require someassembly upon receipt of shipment.Please refer to Packaging Information andAssembly Instructions.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Core Barrel - LTK48
Core Barrels kg lbs
1-8 63941 LTK48 Core Barrel 1.5 m / 5 ft 8.3 18.41-8 63943 LTK48 Core Barrel 3.0 m / 10 ft 17.5 38.6
Standard Configuration Qty
1 63948 LTK48 Head Assembly* 12 63926 Inner Tube, 1.5 m / 5 ft 12 63928 Inner Tube, 3.0 m / 10 ft 13 67709 Core Lifter 14 63925 Core Lifter Case 15 62222 Outer Tube, 1.5 m / 5 ft 15 62217 Outer Tube, 3.0 m / 10 ft 16 63950 Inner Tube Protector 17 3541994 ITHT Product Manual (not shown) 18 306390 Safety Poster (not shown) 1
! Additional options available.
* See the head assembly section for a detailed configuration and available options.
NOTE: Standard inner and outer tubes are supplied with chromeplated outer diameters, inner tube 177.8 mm (7 in) and outertube 254 mm (10 in). For chrome plating on inner tube insideand outside diameters, see inner tube options section.
Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
The field proven, LTK48 Thin Kerf Conventional Coring System offersa cost effective, high production alternative to conventional wider kerfcore barrels. The Thin Kerf core barrel was designed for optimumproduction and core recovery in medium to extra hard formations.Small, lightweight circulation pumps can provide the low drilling fluidflow rates required. The use of water or polymer based drilling fluids isdesirable (clay based drilling muds are not recommended due to thesmall annulus between the inner and outer tubes). The low bit weightnecessary to run thin wall impregnated bits reduces wear and tear onthe drill and rods, and improves core recovery in highly fracturedground.
By minimizing on bit kerf, Boart Longyear has effectively increasedcore size in an "A" size hole to the point where nearly "B" size core isretrieved. This makes the LTK48 core barrel system the logical choicefor conventional drilling programs.
How to Order:To order a standard core barrel:• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number.
Options:There are alternatives to the standard core barrel which are indicatedby a “ ”. To view these options refer to the inner tube options section.
How to Order:To order a non-standard core barrel:• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number.• List all optional parts and part numbers from the inner tube options
section.
NOTE: For information on packaging and assembly, refer to thepackaging and/or assembly sections.
12
3
4
5
6
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Head Assembly - LTK48
Standard head assembly components (items 1-15) are included in thestandard core barrel.
NOTE: For information on packaging and assembly, refer to thepackaging and/or assembly sections.
Head Assembly kg lbs
1-15 63948 LTK48 Head Assembly 2.8 6.2
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Standard Configuration Qty
1 63938 Head 12 17447 Grease Fitting 13 93117 Hex Nut 14 63944 Spindle 15 67733 Shut-Off Valve 16 20163 O Ring 17 63145 Bearing Retainer 18 63461 Compression Spring 19 67734 Stop Washer 1
10 68062 Safety Washer 111 67732 Retainer Screw 112 67605 Nyloc Hex Nut 113 67307 Ball Bearing 314 67731 Bearing Housing 115 63945 Bearing Spindle 1
1
2
3
4
5
6
7
14
8
9
10
11
13
15
12
13
13
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Inner Tube Components - LTK48
2
* See the head assembly section for a detailed configuration and available options.
NOTE: Standard inner tubes are chrome plated 177.8 mm (7 in) on theoutside diameter.Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Optional Chrome Plating
2A 63926CP Inner Tube CP 1.5 m / 5 ft 12A 63928CP Inner Tube CP 3.0 m / 10 ft 1
To order inside and outside diameter chrome plated inner tubes use thefollowing part numbers.
Options:There are alternatives to the standard inner tube components whichare indicated by a “ ”. If optional items are chosen, they will replacethe standard items when the order is processed.
How to Order:To order a non-standard core barrel:• Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number.• List optional parts and part numbers from this page.
NOTE: For information on packaging and assembly, refer to thepackaging and/or assembly sections.
Standard Configuration Qty
1 63948 LTK48 Head Assembly* 12 63926 Inner Tube, 1.5 m / 5 ft 12 63928 Inner Tube, 3.0 m / 10 ft 13 67709 Core Lifter 14 63925 Core Lifter Case 1
4
3
1
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Outer Tube Components - LTK48
6
5
Standard outer tube components (items 5-6) are included in thestandard core barrel for use with BWJLW rods.
Options:There are alternatives to standard outer tube components which areindicated by a “ ”. If optional items are chosen, they will replace thestandard items when the order is processed.
How to Order:To order a non-standard core barrel:• Select a 1.5 m or 3.0 m core barrel part number.• List all optional parts and part numbers from this page, and/or the
options from the inner tube components sections.
NOTE: For information on packaging and assembly, refer to thepackaging and/or assembly sections.
NOTE: Standard inner and outer tubes are supplied with chromeplated outer diameters, inner tube 177.8 mm (7 in) and outertube 254 mm (10 in). For chrome plating on inner tube insideand outside diameters, see inner tube options section.
Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Outer Tube Components Qty
5 62222 Outer Tube, 1.5 m 15 62217 Outer Tube, 3.0 m 16 63950 Inner Tube Protector 1
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
LTK48 core barrels may be extended from 1.5 m (5 ft) to 3.0 m (10 ft)or 4.5 m (15 ft), or 3 m (10 ft) to 6 m (20 ft) lenghts in consolidatedground conditions. LTK48 inner and outer tubes consist of box andpin thread connections, which eliminates the need for inner tubecouplings.
Example A: To extend a 1.5 m (5 ft) core barrel to a 3.0 m (10 ft)core barrel, add the following:• 1-inner tube 1.5 m/3 ft• 1-outer tube 1.5 m m/3 ft
NOTE: Inner tube stabilizers are not available with LTK48.
Extended Core Barrels
HeadAssembly
InnerTube
InnerTube
Core Lifter
Core LifterCase
OuterTube
OuterTube
Bit
ReamingShell
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Spare Parts Kit - LTK48
Spare Parts Kit kg lbs
1-13 64645 LTK48 Core Barrel Spare Parts Kit — —
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Parts Qty
1 17447 Grease Fitting 12 93117 Hex Nut 13 67733 Shut-Off Valve 24 20163 O Ring 25 63461 Compression Spring 16 68062 Safety Washer 17 67732 Retainer Screw 18 67605 Nyloc Hex Nut 19 67307 Ball Bearing 3
10 67731 Bearing Housing 111 63945 Bearing Spindle 112 67709 Core Lifter 2013 63925 Core Lifter Case 2
Spare Parts Kits are designed to meet the average requirements for1 000 m (3,300 ft) of drilling.
1
2
3
4
5
6
7
8
10
9
11
12
13
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Packaging Information
Ordering Information
Boart Longyear has developed an innovative and practical approachto selecting the best core barrel for your drilling application. Thisapproach incorporates a standard core barrel consisting of the headassembly, inner tube components, outer tube components, the In-The-Hole Tools Product Manual and Safety Poster. To order thestandard configuration core barrel, select a 1.5 m/5 ft or 3.0 m/10 ftcore barrel part number from the standard core barrel page.
There are also options available for standard product which areindicated by a “ ”. A listing of the options available appears on theinner tube options section. If you would like to substitute the standardproduct for these options, select a 1.5 m/5 ft or 3.0 m/10 ft core barrelpart number from the standard core barrel page and specify alloptional parts and part numbers from this section.
Packaging Information
Core barrel parts are packaged exclusively to provide the customerwith the ability to assemble the core barrel with the ideal configurationto the drilling application.
The head assembly is shipped assembled. If options are ordered forthe inner tube , they will replace the standard component.
Box Specifications (approximate)
1.5 m/5 ft CORE BARRELLength ............................................................................................. 1 778 mm (70 in)Width .................................................................................................... 127 mm (5 in)Height ..................................................................................................... 76 mm (3 in)
3.0 m/10 ft CORE BARRELLength .......................................................................................... 3 302 mm (130 in)Width .................................................................................................... 127 mm (5 in)Height ..................................................................................................... 76 mm (3 in)
NOTE: May not be exactly as shown, for illustration purposes only.
Head Assembly
Core Lifter,Core Lifter Case
Inner Tube andOuter Tube
Thread Protector
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Assembly InstructionsAssembly Instructions
Follow these instructions carefully:
Inner Tube Components1) Apply rod grease (p/n 62796) to the inside of the core lifter case
and to the outside of the core lifter.2) Insert the core lifter into the core lifter case from the threaded end.3) Apply Z-50 thread compound (p/n 306486) to the threaded ends of
the head assembly, core lifter case and inner tube.4) Thread the head assembly to one end of the inner tube and the
core lifter case to the other. Use an inner tube wrench to ensurethe joints are snug.
Outer Tube Components1) If the core barrel is intended for storage, thread the head
assembly, complete with the inner tube, to the outer tube andattach the thread protector. If the core barrel is intended forimmediate use, install a reaming shell and bit instead of the threadprotector.
2) Tighten all joints with an outer tube wrench to ensure they aresnug.
NOTE: For complete operating instructions, refer to the ITHT ProductManual that is shipped with every core barrel.Clearly post the Safety Poster in your work area.
HeadAssembly
OuterTube
ThreadProtector
InnerTube
CoreLifter
CoreLifterCase
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Drill Rods
AWJ
AWJLW
Packaging Information
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
AWJ Drill Rods
Imperial Lengths kg lbs
1 63094 AWJ Drill Rod, 2 ft 3.3 7.21 62786 AWJ Drill Rod, 5 ft 7.5 16.51 62785 AWJ Drill Rod, 10 ft 14.6 32.2
1
WJ Thread Profile
Box Pin WJ drill rod:• Friction welded pin and box ends.• Z-50 Thread Compound (p/n 306486, 8 kg pail) is the
recommended thread lubricant to reduce wear and the possibility ofgalling during drilling operations.
• To reduce the friction between the walls of the hole and the drillrod, apply rod grease (p/n 62796) to the surface of the drill rods.Rod grease also reduces in-hole vibration, increasing tool andequipment service life.
• Made to DCDMA standards - fully interchangeable.
Drill rods MUST be pretorqued with the minimum recommendedmake-up torque to preload the box and pin prior to drilling. Drillingtorque alone will not make-up the joint. Drilling operating torqueshould never exceed make-up torque.
NOTE: Drill rods are sold by the bundle, see Packaging Informationsection.Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Friction Weld
Friction Weld
Internally UpsetBox End
Internally UpsetPin End
Rod Body
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
AWJLW Drill Rods
Metric Lengths kg lbs
1 63468 AWJLW Drill Rod, 1.5 m 6.0 13.31 63467 AWJLW Drill Rod, 3.0 m 11.6 25.6
WJ Lightweight drill rod:• Friction welded pin and box ends.• Decreased rod body wall thickness to reduce weight.• Two identification grooves on the pin end allows for easy location
of joints in the drill string.• Z-50 Thread Compound (p/n 306486, 8 kg pail) is the
recommended thread lubricant to reduce wear and the possibility ofgalling during drilling operations.
• To reduce the friction between the walls of the hole and the drillrod, apply rod grease (p/n 62796) to the surface of the drill rods.Rod grease also reduces in-hole vibration, increasing tool andequipment service life.
Drill rods MUST be pretorqued with the minimum recommendedmake-up torque to preload the box and pin prior to drilling. Drillingtorque alone will not make-up the joint. Drilling operating torqueshould never exceed make-up torque.
NOTE: Drill rods are sold by the bundle, see Packaging Informationsection.Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
1
WJ Thread Profile
Box Pin
Friction Weld
Friction Weld
Internally UpsetBox End
Internally UpsetPin End
Rod Body
Identification Grooves
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Packaging Information
Packing Features:• Drill rods are packaged and sold in “bundles” which offer product
protection during shipping and handling.• Heavy duty galvanized hexagon bundle end caps (p/n 41077)
protect the drill rod ends.• Container shipments
- 20 ft container load of 3.0 m/10 ft rods holds 64 bundles (1,216 rods)- 40 ft container load of 3.0 m/10 ft rods holds 100 bundles (1,900 rods)
• Drill rod box and pin threads are protected with Z-50 ThreadCompound (p/n 306486, 8 kg pail) to avoid oxidation duringshipping and storage. Z-50 is the recommended thread lubricant toreduce wear and the possibility of galling during drilling operations.
• Drill rods are coated with Krown KL73 rust inhibitor (p/n 3543544)to reduce product oxidation during shipping. When storing rods forlong periods of time, it is recommended to reapply to the productsurface for maximum protection.
For “AWJ” size rods, a bundle contains 19 rods.
Bundle Specifications
3.0 m/10 ft ROD BUNDLEDimensions (L x W x H) ........................ 3124 x 241 x 216 mm (123 x 9.5 x 8.5 in)Volume .................................................................................................... 0.2 m3 (6 ft3)Gross Weight ................................................................................ 288.5 kg (636 lbs)
1.5 m/5 ft ROD BUNDLEDimensions (L x W x H) ........................... 1600 x 241 x 216 mm (63 x 9.5 x 8.5 in)Volume ................................................................................................... 0.1 m3 (3 ft3)Gross Weight ................................................................................ 149.7 kg (330 lbs)
Bundle Specifications
3.0 m/10 ft ROD BUNDLEDimensions (L x W x H) ........................ 3124 x 241 x 216 mm (123 x 9.5 x 8.5 in)Volume .................................................................................................... 0.2 m3 (6 ft3)Gross Weight ................................................................................ 230.0 kg (507 lbs)
1.5 m/5 ft ROD BUNDLEDimensions (L x W x H) ........................... 1600 x 241 x 216 mm (63 x 9.5 x 8.5 in)Volume ................................................................................................... 0.1 m3 (3 ft3)Gross Weight ................................................................................ 118.8 kg (262 lbs)
For “AWJ Lightweight” size rods, a bundle contains 19 rods.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Water Swivels
Underground Hi-SpeedWater Swivel
Hose and Connections
Spare Parts Kits
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Underground Hi-Speed Water Swivel
NOTE: Identification groove supplied on RQLW water swivel body.It is essential to use suitable lubricant when fitting the swivelseal like soft hand soap and water, or glycerine. Light mineraloil may also be used sparingly.Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Ensure the rough surface of the face seal istowards the bearing.
Do not use hydrocarbon based liquids on ethylene propylenebellows, and do not use grease (including silicon grease) on anyelastomer bellows.
Features:• Suited for operation with drills equipped for hydraulic or
pneumatic rod handling.• #12 JIC hose connection.• ARQLW rod pin direct connection.• Seal adjustment not required.
Parts Qty
1 3546497 Swivel Cap 12 24243 Ball Bearing 13 3546499 Swivel Stem 14 3546501 Ball Bearing 15 3545452 Swivel Body ARQLW 16 17447 Grease Fitting 17 3546522 Swivel Seal 18 3546523 Seal Retainer 1
Assembly kg lbs
1-8 3545445 Hi-Speed Water Swivel ARQLW 1.2 2.6
8
7
6
4
3
2
5
1
#12 JIC
Reference only.See Water Swivel
Hose.
Roughsurfaceface up
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Hose and Connections
Features:• SAE 100R2 Type AT hydraulic hose.• MASHA accepted synthetic rubber cover.• 2000 psi maximum operating pressure.• Industry standard #16 JIC female swivels for easy connect/
disconnect.
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Hi-Speed Water Swivel to Pump Qty
1 41361 #12 JIC-F to #16 JIC-M Adapter 12 3542419 Water Swivel Hose, 9 m (30 ft) 13 19971 #16 NPT-F to #16 JIC-M Adapter 14 18040 Discharge Assembly, #16 NPT 1
12
34
to pump
ARQLWRod Pin
#12 JIC
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Spare Parts Kits
Spare Parts Kits are designed to meet the average requirements for1 000 m (3,300 ft) of drilling.
1
2
3
Spare Parts Kit kg lbs
1-3 3546540 U/G Hi-Speed Water Swivel — —
Parts Qty
1 24243 Ball Bearing 12 3546501 Ball Bearing 13 3546522 Seal Assembly 1
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing
AW Casing
Packaging Information
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing
Imperial Lengths kg lbs
1 26358 AW Casing, 2 ft 3.4 7.61 26356 AW Casing, 5 ft 8.6 19.01 26355 AW Casing, 10 ft 17.2 38.0
Metric Lengths kg lbs
1 66531 AW Casing, 1.5 m 8.5 18.71 66533 AW Casing, 3.0 m 17.0 37.51
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Thread Lubrication• Z-50 Thread Compound (p/n 306486) is the recommended thread
lubricant to reduce wear and the possibility of galling during drillingoperations.
W Thread Profile
Box Pin
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Packaging Information
Packing Features:• Casing is packaged and sold in “bundles” which offers product
protection during shipping and handling.• Protective plastic end caps cover box and pin threads sealing in
thread lubrication. For ease of identification, casing protectors arecolor-coded orange.
• Heavy duty galvanized hexagon bundle end caps (p/n 41072)protect the casing ends.
• Casing box and pin threads are protected with Z-50 ThreadCompound (p/n 306486) to avoid oxidation during shipping andstorage. Z-50 is the recommended thread lubricant to reduce wearand the possibility of galling during drilling operations.
• Casing is coated with Krown KL73 rust inhibitor (p/n 3543544) toreduce product oxidation during shipping. When storing casing forlong periods of time, it is recommended to reapply to the productsurface for maximum protection.
For “AW” casing, a “bundle” contains 19 pieces.
Bundle Specifications
3.0 m/10 ft CASING BUNDLEDimensions (L x W x H) .......................... 3150 x 305 x 279 mm (124 x 12 x 11 in)Volume ................................................................................................ 0.30 m3 (10 ft3)Gross Weight ................................................................................... 343 kg (756 lbs)
1.5 m/5 ft CASING BUNDLEDimensions (L x W x H) ............................ 1626 x 305 x 279 mm (64 x 12 x 11 in)Volume ................................................................................................. 0.10 m3 (5 ft3)Gross Weight ................................................................................... 179 kg (395 lbs)
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Recovery Tools
Rod Recovery Taps
Casing Recovery Taps
Outer Tube Recovery Taps
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Rod Recovery Taps
To stuck or broken AWJ Rod.
Features:• Tapered, self-tapping thread allows for full penetration, improved
recovery connection and longer tap life.• Right hand thread.• Connection for optional pilot bit supplied as standard.
1
Drill Rod
AW Rod BoxConnection
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Parallel Wall Rod Recovery Tap kg lbs
1 306035 AWJ Rod Recovery Tap 1.4 3.0
Reference only.See Adapter Subsection.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing Recovery Taps
Drill Rod
To stuck or broken AW Casing.
Parallel Wall Casing Recovery Tap kg lbs
1 306060 AW Casing Recovery Tap 2.3 5.1
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
1
Features:• Parallel wall, self-tapping thread allows for full penetration,
improved recovery connection and longer tap life.• AW rod box connection.• Right hand thread.
Reference only.See Adapter Subsection.
AW Rod BoxConnection
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Outer Tube Recovery Taps
To stuck or broken outer tube.
Features:• Parallel wall, self-tapping thread allows for full penetration,
improved recovery connection and longer tap life.• Right hand thread.
1
Drill RodAWJ
AWJ Rod BoxConnection
NOTE: Refer to the Tech Data section for technical specifications andthe ITHT Product Manual for additional operating information.
Parallel Wall Outer Tube Recovery Tap kg lbs
1 3544205 Outer Tube Recovery Tap — —
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Adapter Subs
Water Swivel Adapter Subs
Casing Adapter Subs
Recovery Tool Adapter Subs
Blank End Adapter Subs
Water Saver Sub
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Water Swivel Adapter Subs
Hi-Speed Water Swivel to Drill Rod kg lbs
1 3542278 ARQLW Rod Box to AWJ Rod Pin 1.3 2.8
Reference only.See Water Swivelsection.
Reference only.See Drill Rodsection.
NOTE: Identification groove supplied on RQLW accessories.Refer to the ITHT Product Manual for additional operatinginformation.
2
Reference only.See Casing section.
Adapter Sub to AW Casing kg lbs
2 64147 AWJ Rod Box to AW Casing Pin 2.2 4.9
Features:• The rod and casing pin threads are electric induction hardened to
ensure long life and minimize rod box thread galling, extending rodlife and joint performance.
• Identification groove supplied on ARQLW adapter subs.
1ARQLWRod Box
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Casing Adapter Subs
Reference only.See Drill Rodsection.
Reference only.See Casingsection.
1
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Drill Rod to BW Casing kg lbs
1 64147 AWJ Rod Box to AW Casing Pin 2.2 4.9
Features:• The casing pin threads are electric induction hardened to ensure
long life and minimize rod box thread galling, extending drill rodthread life and joint performance.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Recovery Tool Adapter Subs
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Drill Rod to Casing Recovery Tap kg lbs
1 63947 AWJ Rod Box to AW Rod Pin 1.1 2.4
Reference only.See Drill Rodsection.
Reference only.See RecoveryTools section.
1
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Blank End Adapter Subs
Drill Rod to Blank End Sub kg lbs
1 63214 AWJ Rod Box to Solid Blank 1.86 4.12 63902 AWJ Rod Pin to Solid Blank 1.25 2.8
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Application:Blank end adapter subs enable you to manufacture your own adaptersubs for your requirements. They are supplied as rod pin or rod boxto either SOLID BLANK bar end or TUBING BLANK end.
Solid bar end subs are for use with hoist plugs and water swivelsONLY. They are NOT for use as cross over subs. Thread stand off isadjusted for hand tight box/pin shoulder makeup.
1 2
Solid Blank Bar End Sub
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Water Saver Sub kg lbs
1 100129 AWJ Water Saver Sub 1.1 2.5
Water Saver Sub
1
Application:The Water Saver Sub includes a check valve feature that retains thecolumn of drilling fluid in the rod string in up-holes. It is used to savetime and increase production by eliminating the need to re-fill the rodstring each time a rod is added when using extended core barrels.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Tools
Inner/Outer Tube Wrenches
Pipe Wrenches
Rod Wrenches
Inner Tube Pliers
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Inner/Outer Tube Wrenches
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Assembly kg lbs
1-5 63891 Full Grip LTK48 Inner Tube Wrench 1.3 3.0
Parts Qty
1 63889 Stationary Jaw 22 63890 Swing Jaw 13 38581 Pin 24 38582 Retaining Ring 45 63903 Wrench Handle 1
Parts Qty
1 601666 Stationary Jaw 12 601667 Swing Jaw 13 67611 Pin 24 38582 Retaining Ring 45 93466 Wrench Handle 1
Assembly kg lbs
1-5 601668 LTK48 Outer Tube Wrench1.9 4.1
1
2
33
44
44
5
1
2
33
44
44
5
1
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
* Recommended for making up “A” size drill rod.
NOTE: Refer to the Tech Data section for drill rod pretorque and theITHT Product Manual for additional operating information.
Pipe Wrenches
Assembly kg lbs
1-5 14942 18” Heavy Duty Pipe Wrench 2.6 5.8
Parts Qty
1 14944 Hook Jaw 12 14943 Heel Jaw with Pin 13 200561 Coil and Spring 14 200562 Wrench Nut 15 — Wrench Handle (included) 1
Assembly kg lbs
1-5 14945 24” Heavy Duty Pipe Wrench* 4.3 9.4
Parts Qty
1 14947 Hook Jaw 12 14946 Heel Jaw with Pin 13 200563 Coil and Spring 14 200564 Wrench Nut 15 — Wrench Handle (included) 1
Assembly kg lbs
1-5 14948 36” Heavy Duty Pipe Wrench 8.4 18.6
Parts Qty
1 14950 Hook Jaw 12 14949 Heel Jaw with Pin 13 200565 Coil and Spring 14 200566 Wrench Nut 15 — Wrench Handle (included) 1
Assembly kg lbs
1-5 14951 48” Heavy Duty Pipe Wrench 12.7 28.0
Parts Qty
1 14953 Hook Jaw 12 14952 Heel Jaw with Pin 13 200567 Coil and Spring 14 200568 Wrench Nut 15 — Wrench Handle (included) 1
3
2
41
2
35
Estimated Torque
45 KG (100 LB) HAND LOAD18” Heavy Duty Pipe Wrench ..................................................... 200 Nm (150 ft lbf)24” Heavy Duty Pipe Wrench ..................................................... 270 Nm (200 ft lbf)36” Heavy Duty Pipe Wrench ..................................................... 400 Nm (300 ft lbf)48” Heavy Duty Pipe Wrench ..................................................... 540 Nm (400 ft lbf)
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
* Can be used for making and breaking AWJ and AWJ Lightweight drillrods.
NOTE: Refer to the Tech Data section for drill rod pretorque and theITHT Product Manual for additional operating information.
Rod Wrenches
5
Assembly kg lbs
1-7 45790 ARQLW Rod Wrench* 6.0 13.2
Parts Qty
1 45983 Stationary Jaw 22 45982 Swing Jaw 13 43484 Pin, 5/8” x 4” 14 43485 Pin, 5/8” x 2-3/4” 15 38583 Retaining Ring 46 43422 Spring 17 43483 Wrench Handle 12
3
65
5
1
1
4
5
7
Estimated Torque
45 KG (100 LB) HAND LOADARQLW Rod Wrench .................................................................. 200 Nm (150 ft lbf)
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Inner Tube Pliers
Inner Tube Pliers kg lbs
1 100508 Inner Tube Pliers 0.9 2.0
This handling tool is ideal to assist with the retreival of the inner tubeassembly, primarily with extended core barrels. The lower grip can betightened onto the outer tube and the second grip released ortightened as the inner tube assembly is brought out of the outertube.
1
NOTE: Refer to the ITHT Product Manual for additional operatinginformation.
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Technical Data
Nominal Dimensions
Drilling Guidelines
Rod Operating Specifications
Conventional Coring System LTK48
12/04 MKT1480 P/N 3543105-K
© 2004 Boart Longyear Inc. Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
Nominal Dimensions
HOLE DIAMETER (REAMING SHELL GAUGE) .......... 47.93/48.13 mm (1.887/1.895 in)HOLE VOLUME (REAMING SHELL GAUGE) .................................. 1.81 L/m (0.15 gal/ft)CORE DIAMETER/BIT INSIDE DIAMETER
LTK48 .................................................................... 35.20/35.41 mm (1.386/1.394 in)BIT OUTSIDE DIAMETER ............................................. 47.68/47.88 mm (1.877/1.885 in)BIT KERF WIDTH
LTK48 ................................................................................................ 6.3 mm (0.25 in)CORE BARREL OUTER TUBE
Outer Diameter .............................................................................. 46.8 mm (1.84 in)Inner Diameter ............................................................................... 41.3 mm (1.65 in)
CORE BARREL INNER TUBEOuter Diameter .............................................................................. 39.7 mm (1.56 in)Inner Diameter ............................................................................... 36.6 mm (1.44 in)
ROD BODYOuter DiameterAWJ ................................................................................................. 44.5 mm (1.75 in)AWJLW ............................................................................................ 44.7 mm (1.76 in)Inner DiameterAWJ ................................................................................................. 35.1 mm (1.38 in)AWJLW ............................................................................................ 37.3 mm (1.47 in)
ROD PIN END LENGTH...................................................................................................... 44.45 mm (1.75 in)
Threads per Inch ....................................................................................................... 5
ROD JOINT I.D. ....................................................................................... 15.9 mm (0.63 in)ROD WEIGHT
AWJ ............................................................................................ 4.83 kg/m (3.20 lb/ft)AWJLW ....................................................................................... 3.47 kg/m (2.42 lb/ft)
ROD CONTENT VOLUMEAWJ ............................................................................................ 0.90 L/m (0.08 gal/ft)AWJLW ....................................................................................... 0.94 L/m (0.09 gal/ft)
ROD DISPLACEMENT VOLUMEAWJ ............................................................................................ 0.62 L/m (0.05 gal/ft)AWJ Lightweight ....................................................................... 0.50 L/m (0.04 gal/ft)
ROD/HOLE ANNULUS VOLUMEAWJ/AWJLW .............................................................................. 0.25 L/m (0.02 gal/ft)
AW CASINGOuter Diameter ............................................................................... 51.7 mm (2.30 in)Inner Diameter ............................................................................... 48.4 mm (1.90 in)Weight ......................................................................................... 5.70 kg/m (3.80 lb/ft)
Technical Data
Rod Operating SpecificationsRATED MAXIMUM DEPTH .................................................................... 1,500 m (4,920 ft)RATED MAXIMUM DRILLING PULLBACK ......................................... 80 kN (18,000 lbf)RATED MAXIMUM DRILLING TORQUE* ......................................... 406.7 Nm (300 ft lbf)RECOMMENDED MINIMUM MAKE-UP TORQUE to 1 000 m (3,280 ft) depth*
AWJ/AWJLW .............................................................................. 203.4 Nm (150 ft lbf)MIDBODY MINIMUM YIELD STRENGTH
AWJ ....................................................................................... 551.6 MPa (80,000 psi)AWJLW .................................................................................. 620.5 MPa (90,000 psi)
MIDBODY MINIMUM TENSILE STRENGTHAWJ ....................................................................................... 620.5 MPa (90,000 psi)AWJLW ................................................................................ 723.9 MPa (105,000 psi)
JOINT MINIMUM YIELD STRENGTH ........................................ 689.5 MPa (100,000 psi)JOINT MINIMUM TENSILE STRENGTH .................................... 861.8 MPa (125,000 psi)PURE TENSION TO FAILURE** ....................................................... 355.9 kN (80,000 lbf)PURE TORSION TO FAILURE** ................................................. 5 423.3 Nm (4,000 ft lbf)
NOTE: Rod capacities and failure loads were determined by independent facility. Asafety factor has been applied for the above ratings (applies to new, unusedBoart Longyear rods, in a straight vertical down hole, assuming complianceto ITHT Product Manual and standard core drilling practices).Burst and collapse pressure ratings will be reduced under drilling loads.Operating torque should not exceed make-up torque.* Increase make-up torque to match operating torque as depth increases.** These failure loads are for product comparison purposes ONLY. Drilling
loads should not exceed rating values.
Drilling Guidelines
RECOMMENDED FLOW...................................................................................... 11 to 20 L/min (2.5 to 4 gpm)
BIT WEIGHT RANGE........................................................................................ 8 to 14 kN (1,900-3,100 lbf)
BIT PENETRATION @ 1000 rpmRate @ 80 r/cm (200 rpi) ....................................................... 19 cm/min (7.5 in/min)Rate @ 100 r/cm (250 rpi) .................................................... 15 cm/min (6.0 in/min)
BIT PENETRATION @ 1700 rpmRate @ 80 r/cm (200 rpi) ..................................................... 28 cm/min (11.0 in/min)Rate @ 100 r/cm ( 250 rpi) .................................................... 22 cm/min (8.8 in/min)
Pressure Ratings (per API bulletin 5C3)BURST PRESSURE - Box Shoulder
AWJ/AWJLW Rod ................................................................... 96.7 MPa (14,030 psi)AW Casing ................................................................................ 28.8 MPa (4,170 psi)
BURST PRESSURE - MidbodyAWJ Rod ............................................................................... 104.9 MPa (15,215 psi)AWJLW Rod ........................................................................... 77.4 MPa (11,220 psi)AW Casing .............................................................................. 71.8 MPa (10,416 psi)
COLLAPSE PRESSURE - MidbodyAWJ/AWJLW Rod ................................................................. 106.9 MPa (15,500 psi)AW Casing .............................................................................. 75.7 MPa (10,972 psi)
top related