m60 led direct/indirect [l6di] selux
Post on 14-Jan-2022
45 Views
Preview:
TRANSCRIPT
Page 1 of 12 (Rev. 11/2021)
L60DI_SS_v2.7In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Project:
Type: Qty:
Date: Customer:
M60LED Direct/Indirect
MI Clear Lens with Microprism
NB LMO Symmetric with Satine Lens
A2 LMO Asymmetric 20° Wall Washer with Satine Lens
BW LMO Batwing withSatine Lens
A5 LMO Asymmetric 5° Wall Grazer with Satine Lens
MI Clear Lens with Microprism
WB LMO Wide Batwing
8 See page 9 for details
Order Code:
Series L6DI M60 LED Direct/Indirect
L6DI
L6DI
* Custom colors are available, please consult factory
Emergency Options
EC11,12 Emergency Circuit Wiring
11 See page 7 for full details and restrictions12 For emergency options with sensors please consult
factory13 4’ available with DIM driver only. ≥6’ available with
all driver options.
1 Values calculated from a 4’ fixture at 3500K, 90+ CRI using LW shielding and DIM driver. For additional information please see page 2.
2 Mixed output available 4’ and up, see page 7 for details.
3 Not available with Lutron.
T9 Lit “T” section
X9 Lit “X” section
L9 Lit Horizontal 90° Corner
Configuration Options
Direct Light Engine
CCT 930 3000K90+ CRI
935 3500K 90+ CRI
940 4000K 90+ CRI
Direct Shielding
LW LED Optimized White Lens
Mounting C Cable
S Swivel Stem
RS Rigid Stem
W Wall Mount
Nominal Fixture Length
02 2 ft.
04 4 ft.
03 3 ft.
05 5 ft.
06 6 ft.
08 8 ft.
07 7 ft.
XX Runs (over 12’) are available in 1’ nominal increments, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)
Finish WH White
SV Silver
SP Specify Premium Color
Voltage 1120 Volt
2277 Volt
LED WARRANTY
5YEAR
ARRA Compliant
ADA Compliant
927 2700K90+ CRI
09 9 ft.
11 11 ft.
10 10 ft.
12 12 ft.
U120 through 277 50/60hz capable
Indirect Light Engine
IndirectShielding
LW LED Optimized white lens
Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 through 5 for additional details.
DL
Damp Location Rated
FS In-Line Fuse
Fixture Options
SS8 Separate Switching
DE15,7 Lutron 1% Eco-System
5 See page 6 for full details6 120V only7 EM option not available in 4’ length
DC25,6,7 Lutron 1% 2-Wire
Driver DIM5 0-10V 1% (Linear)
Sensor Options
xE9,10 Enlighted
xS19,10 Sensor Switch Daylight
xS29,10 Sensor Switch Occ/Vac
xS39,10 Sensor Switch Occ/Vac/Daylight
9 Minimum fixture length 2’. See page 9 for full details and restrictions
10 Requires DIM driver (0-10V)
Replace “x” with quantity
3347 Volt (consult factory)
xSN nLight enabled(consult factory)
BL Semi-Matte Black
EMR Remote Micro Inverter (consult factory)
EM11,12,13 Integral EM Battery Pack
xV Lutron Vive (consult factory)
8304 3000K 80+ CRI
8274 2700K 80+ CRI
8354 3500K 80+ CRI
8404 4000K 80+ CRI
4 Consult factory for lead times
DL015,7 eldoLED 0.1% SOLOdrive 0-10V (Logarithmic)
DED5,7 eldoLED 1% ECOdrive DALI-2 (Logarithmic)
D015,7 eldoLED 0.1% SOLOdrive 0-10V (Linear)
DIL5,7 eldoLED 1% ECOdrive 0-10V (Logarithmic)
RGBW (consult factory)
* See page 11 for full details and restrictions
1C451,2,3 80CRI-1018lm 90CRI-855lm 11.1W per foot
1C401,2,3 80CRI-954lm 90CRI-802lm 9.9W per foot
1C351,2 80CRI-834lm 90CRI-701lm 8.7W per foot
1C301,2 80CRI-746lm 90CRI-627lm 7.3W per foot
1C251,2 80CRI-594lm 90CRI-500lm 6.1W per foot
1C201,2 80CRI-494lm 90CRI-415lm 4.9W per foot
1C451,2,3 80CRI-1018lm 90CRI-855lm 11.1W per foot
1C401,2,3 80CRI-954lm 90CRI-802lm 9.9W per foot
1C351,2 80CRI-834lm 90CRI-701lm 8.7W per foot
1C301,2 80CRI-746lm 90CRI-627lm 7.3W per foot
1C251,2 80CRI-594lm 90CRI-500lm 6.1W per foot
1C201,2 80CRI-494lm 90CRI-415lm 4.9W per foot
DC3 Lutron 1% 3-Wire (consult factory)
BUY AMERICAN
- - - - - - - - - - -- - -
Page 2 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
4 3/4” (120mm)
2 1/4” (56mm)
2 3/8” (60mm)
Construction:
Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.
Geartray - Low copper 6063-T6 extruded aluminum profile.
Shielding - Extruded, impact resistant acrylic lens:- LED Optimized White Lens (LW)- Clear Lens with Microprism (MI)- “LMO” Wide Batwing (WB) - Indirect Only Direct only: “LMO” refers to the Selux proprietary LED optical system - Light modulation optics. These lenses (other than WB) are offered in M60 behind a Satine Lens for even illumination and comfortable lit appearance.- “LMO” Symmetric Lens (NB)- “LMO” Asymmetric 20° Wall Washer (A2) - “LMO” Asymmetric 5° Wall Grazer (A5)- “LMO” Batwing (BW)
Mounting(s)- 1/16” Aircraft Cable, Ø5/8” Swivel or Rigid Steel Stem, Wall Bracket, (see pages 3 through 5 for details). ** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory.
Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Configurations are available in approximately 1’ increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field.
Exact length luminaires - Individual luminaires, Runs, and Configurations are available in exact lengths to meet your project needs. Please consult factory with you requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires.
L60 Joiner(s) - Runs and Configurations are supplied in multiple housings that are joined together in the field using the supplied L60 Joining System. This allows ease of installation and ensures a uniform appearance (see page 9 for details).
Weight: 2.8 lb. per foot.
Electrical/Performance:
LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 95% at 25,000 hours and 90% at 60,000 hours at 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.
Photometrics - Consult website or factory for IES Files. Independent photometric lumen measurement complies with IES LM-79-08 testing procedures. Due to the LED manufacturer’s tolerances, the listed output has a ±5% tolerance. For outputs based on different optics or CCT, please see page 12 for details.
CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.
CRl - 90+ and 80+ CRI. Consult factory for lead times of 80 CRI.
All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 6.
Sensors - Selux offers a variety of integral sensor options. Sensors are placed on the direct side of the fixture, but can control the Indirect lighting. For details and specifications, please refer to page 10.
Emergency - There are multiple emergency options available - Emergency Circuit, Remote Micro Inverter, and EM Integral Battery Pack. Please consult factory for use of sensors with emergency options. For more details on EC and EM options, see page 9.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35°C (95°F) for all drivers.
Luminaires are suitable for minimum ambient temperatures of -40ºC (-40ºF) for DIM, DIL, DED, D01, and DL01 drivers; 0ºC (32ºF) for DC2 and DE1 drivers.
Luminaire Finish:
Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.
All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.
Standard interior colors are White (WH), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M60 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”
Certifications and Compliance:
NRTL - For Dry and Damp location (I.E. cULus; cCSAus)ADA CompliantARRA CompliantRoHS Compliant
LW DirectLW Indirect
LW DirectLMO WB Indirect
4 3/4” (120mm)
2 3/8” (60mm)
M60LED Direct/Indirect
Page 3 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Cable Mounting (C)
Outlet box for feed only (by others)
L6DI Cable (C) Suspension Detail (Feed location(s) only)
L6DI Cable (C) Suspension Detail (Non-Feed location(s) only)
Cross bar with 1/4”-20 rod and ground screw
1/4” x 5” diameter canopy (White)
2x White cable stay
Cord strain relief bushing
1/4”-20 Threaded rod (supplied and installed in the field by others)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).
2x Outlet box screws (by others)
1/4”-20 Slip ring coupler
Feed cord (White)
1/16” Aircraft cable
1/4”-20 Slip ring coupler
1/16” Aircraft cable
Chrome gripper
Luminaire
1/4” x 2” diameter canopy (White)
Chrome gripper
Luminaire
Cable Mounting (C)
Min. 5/8” toMax. 3/4”
ma
x Cable Mounting (C) - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
“E” Illuminated Length
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
02 (2ft.) 2' - 1/4" 616 0' - 7/8" 22 1' - 10 1/2" 572 0' - 3/8" 9 1' - 9" 534
03 (3ft.) 3' - 1/4" 921 0' - 7/8" 22 2' - 10 1/2” 876 0' - 3/8" 9 2' - 9" 839
04 (4ft.) 4' - 1/4" 1225 0' - 7/8" 22 3' - 10 1/2” 1181 0' - 3/8" 9 3' - 9" 1144
05 (5ft.) 5' - 1/4" 1530 0' - 7/8" 22 4' - 10 1/2” 1486 0' - 3/8" 9 4' - 9" 1448
06 (6ft.) 6' - 1/4" 1835 0' - 7/8" 22 5' - 10 1/2” 1791 0' - 3/8" 9 5' - 9" 1753
07 (7ft.) 7' - 1/4" 2140 0' - 7/8" 22 6' - 10 1/2” 2096 0' - 3/8" 9 6' - 9" 2058
08 (8ft.) 8' - 1/4" 2445 0' - 7/8" 22 7' - 10 1/2” 2400 0' - 3/8" 9 7' - 9" 2363
09 (9ft.) 9' - 1/4" 2749 0' - 7/8" 22 8' - 10 1/2” 2705 0' - 3/8" 9 8' - 9" 2668
10 (10ft.) 10' - 1/4" 3054 0' - 7/8" 22 9' - 10 1/2” 3010 0' - 3/8" 9 9' - 9" 2972
11 (11ft.) 11' - 1/4" 3359 0' - 7/8" 22 10' - 10 1/2” 3315 0' - 3/8" 9 10' - 9" 3277
12 (12ft.) 12' - 1/4" 3664 0' - 7/8" 22 11' - 10 1/2” 3620 0' - 3/8" 9 11' - 9" 3582
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.
Page 4 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Stem Mounting (S and RS)
Outlet box (supplied and installed by others)
L6DI Swivel Stem (S) Suspension Detail (feed wires through stem supplied by others)
L6DI Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by others)
Hemispherical assembly
3/8” IP Crossbar with ground screws
1 7/16” x 5” diameter canopy (White)
1. Ø 5/8” Swivel Stem provides 30° swivel and can be cut in field (48” max. from ceiling to luminaire).
2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).
Cotter pin
3/8” IP steel swivel stem (White)
Luminaire
Luminaire
Outlet box (supplied and installed by others)
3/8” IP nipple (supplied and installed by others)
Suspension hickey
1/4” x 5” diameter Canopy (White)
Canopy securing screw
Swivel Stem (S) and Rigid Stem (RS) Mounting
48”
ma
x
Dress nut
Square nut
Square nut
Square nut
Square nut
3/8” IP steel stem (White)
Dress nut
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
“E” Illuminated Length
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
02 (2ft.) 2' - 1/4" 616 0' - 7/8" 22 1' - 10 1/2" 572 0' - 7/8" 22 1' - 9" 534
03 (3ft.) 3' - 1/4" 921 0' - 7/8" 22 2' - 10 1/2” 876 0' - 7/8" 22 2' - 9" 839
04 (4ft.) 4' - 1/4" 1225 0' - 7/8" 22 3' - 10 1/2” 1181 0' - 7/8" 22 3' - 9" 1144
05 (5ft.) 5' - 1/4" 1530 0' - 7/8" 22 4' - 10 1/2” 1486 0' - 7/8" 22 4' - 9" 1448
06 (6ft.) 6' - 1/4" 1835 0' - 7/8" 22 5' - 10 1/2” 1791 0' - 7/8" 22 5' - 9" 1753
07 (7ft.) 7' - 1/4" 2140 0' - 7/8" 22 6' - 10 1/2” 2096 0' - 7/8" 22 6' - 9" 2058
08 (8ft.) 8' - 1/4" 2445 0' - 7/8" 22 7' - 10 1/2” 2400 0' - 7/8" 22 7' - 9" 2363
09 (9ft.) 9' - 1/4" 2749 0' - 7/8" 22 8' - 10 1/2” 2705 0' - 7/8" 22 8' - 9" 2668
10 (10ft.) 10' - 1/4" 3054 0' - 7/8" 22 9' - 10 1/2” 3010 0' - 7/8" 22 9' - 9" 2972
11 (11ft.) 11' - 1/4" 3359 0' - 7/8" 22 10' - 10 1/2” 3315 0' - 7/8" 22 10' - 9" 3277
12 (12ft.) 12' - 1/4" 3664 0' - 7/8" 22 11' - 10 1/2” 3620 0' - 7/8" 22 11' - 9" 3582
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.
Page 5 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
1. Aluminum wall bracket (by Selux).2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by
others).3. 1/4”-20 Threaded rod, 1/4”-20 lock washer and 1/4”-20 nut required to
anchor the wall bracket. Mounting hardware supplied and installed to code by others.
Wall Mount (W) (Covers a 4x4 or 2x4 J-Box)
4” (102mm)
4” (102mm)
1”
(25mm)
3 3/8” (85mm)
Wall Mounting (W)
For patterns and configurations that include a wall mounted option, please see page 11 for details.
Wall (W) Mount - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
02 (2ft.) 2' - 1/4" 616 0' - 6 1/8" 156 1' - 0" 305 0’ - 6 1/8” 156
03 (3ft.) 3' - 1/4" 921 0’ - 6 1/8” 156 2' - 0" 610 0’ - 6 1/8” 156
04 (4ft.) 4' - 1/4" 1225 0’ - 6 1/8” 156 3' - 0" 915 0’ - 6 1/8” 156
05 (5ft.) 5' - 1/4" 1530 0’ - 6 1/8” 156 4' - 0" 1220 0’ - 6 1/8” 156
06 (6ft.) 6' - 1/4" 1835 0’ - 6 1/8” 156 5' - 0" 1524 0’ - 6 1/8” 156
07 (7ft.) 7' - 1/4" 2140 0’ - 6 1/8” 156 6' - 0" 1829 0’ - 6 1/8” 156
08 (8ft.) 8' - 1/4" 2445 0’ - 6 1/8” 156 7' - 0" 2134 0’ - 6 1/8” 156
09 (9ft.) 9' - 1/4" 2749 0’ - 6 1/8” 156 8' - 0" 2439 0’ - 6 1/8” 156
10 (10ft.) 10' - 1/4" 3054 0’ - 6 1/8” 156 9' - 0" 2744 0’ - 6 1/8” 156
11 (11ft.) 11' - 1/4" 3359 0’ - 6 1/8” 156 10' - 0" 3048 0’ - 6 1/8” 156
12 (12ft.) 12' - 1/4" 3664 0’ - 6 1/8” 156 11' - 0" 3353 0’ - 6 1/8” 156
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.
Page 6 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Drivers:
*For inrush and control current, please refer to the driver manufacturers’ spec sheets.
Driver Quantity
Light Engine Dimming CodeLength
2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft
1C20
DIM/DIL
1 2 44 2D01/DL01/DED
DE1
DC2 6 4
1C25
DIM/DIL
1 22
44 2D01/DL01/DED
DE1
DC2 4 6 4
1C30
DIM/DIL
1 22
44 4D01/DL01/DED
DE1
DC2 4 6 6
1C35
DIM/DIL
1 22
22
44 4D01/DL01/DED
DE1
DC2 4 4 6 6
1C40
DIM/DIL1 2 2
44 6
D01/DL01/DED 2
DE1N/A
DC2
1C45
DIM/DIL1 2
41 4
64 6
D01/DL01/DED 2 4
DE1N/A
DC2
0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%.
0-10V logarithmic eldoLED ECOdrive dimming (DIL)Luminaires supplied with drivers offering the capability of either normal switched operation of 0-10V dimming for logarithmic dimming curve, Fixtures shipped wired for dimming. For on/off functionality, simply cap the dimming leades. Minimum dimming level preset at factory to 1%.
eldoLED ECOdrive DALI-2 dimming (DED)Luminaires supplied with ECOdrive DALI-2 dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
eldoLED SOLOdrive 0-10V linear dimming (D01) Luminaires supplied with SOLOdrive 0-10V dimming driver with linear dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.
eldoLED SOLOdrive 0-10V logarithmic dimming (DL01) Luminaires supplied with SOLOdrive 0-10V dimming driver with logarithmic dimming curve. Minimum dimming level preset at factory to 0.1% and “dim to dark”.
LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-Lume 2-wire dimming driver (120V only)programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON EcoSystem dimming (DE1)Luminaires supplied with Hi-Lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). Minimum dimming level down to 1% with SoftOn/FadeToBlack.
* For control recommendations, please contact driver manufacturer.
Page 7 of 12 (Rev. 11/2021)
L60DI_SS_v2.7 In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Wiring Diagrams
Sensor Wiring Diagrams
- The following wire(s) are in addition to the standard above -
DE1
0-10V linear (DIM)0-10V logarithmic eldoLED ECOdrive (DIL) DALI-2 logarithmic eldoLED ECOdrive (DED) 0-10V linear eldoLED SOLOdrive (D01)0-10V logarithmic eldoLED SOLOdrive (DL01)
DIM, DIL, DED, D01, DL01
Lutron EcoSystem (DE1)
Lutron 2-Wire (DC2)
DC2
Standard Wiring supplied for all drivers
Green = GroundWhite = Neutral (120V/277V/347V) or L2 (240V)Black = Hot /L1 (120V-347V)
Pink = (-) DALI-2 or 0-10V Dimming ControlPurple = (+) DALI-2 or 0-10V Dimming Control
Violet = “E1” Digital Link Dimming ControlViolet/White = “E2” Digital Link Dimming Control
No additional wires
Driver
Driver
Driver
FeedGreen White Black
Pink (-)Purple(+)
Green White Black
FeedGreen White Black Violet
Violet/White
Feed
Neutral
Hot 120/277V
white
white
pinkpurplered
black
NeutralHot 120/277V
0-10VAUX(+)AUX(-)
(+)(-)
Enlighted
Lutron Vive
Sensor Switch
Eldo 0-10V Driver
black
purple
blackred
E1(+)E2(-)
AC(+)(-)
purplepurple
blue
blue
black
white
AC OUT(+)(-)
AC IN(+)(-)
(+)(-)
RJ45
0-10
Sensor SU-5E-IL
Sensor Switch
MSD EZ7 Sensor
LED light Engine
DIMDriver
Fixture Control Digital Interface
LutronVive
Control UnitCU-4E-FM
EcosystemDriver
S(+)S(-)
E1(+)E2(-)
Page 8 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Driver Power Usage
Driver Light EngineNominal W/ft
120V 277V 347V
DIM, DIL, DED, D01, DL01
1C20 4.9 5.3
n/a
1C25 6.1 6.5
1C30 7.3 7.7
1C35 8.7 8.9
1C40 9.9 10.1
1C45 11.1 11.3
DC2, DE1, DCE, DC3
1C20 5.5 5.2
n/a
1C25 6.7 6.3
1C30 8.0 7.6
1C35 9.3 8.8
1C40 10.6 10.0
1C45 11.6 11.3
DIM @347V
1C20
n/a n/a
5.4
1C25 6.5
1C30 7.7
1C35 8.8
1C40 10.0
1C45 11.2
EM all 6 n/a
Driver power chart - use below values to determine the nominal watts per foot based on driver, light engine, and voltage.* Driver losses increase the wattage for fixtures less than 4 foot.** Values are nominal values determined based on multiple tested fixtures.
Page 9 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed (Supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings.
* For Damp Location with sensors, please consult factory.
Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use).
* All separately switched (non-EM) circuits within an individual luminaire, linear run, or configuration must be connected to the same branch circuit on-site.
* To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.
* If the project requires different separate switching than outlined above please consult the factory.
* For Separate Switching with sensors, please consult factory.
Joiner System - standard for Runs and Configurations
1/16”
Emergency Wiring (EC) - EC luminaires are intended to be wired to separate panels/breakers for emergency use. See install instructions for proper wiring.
For 2’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.
For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).
If a different configuration is needed, please consult factory.
Note: Wiring may vary slightly due to on-site conditions or local codes. Please follow all safety installation protocols contained within install instructions when installing luminaire.
Emergency Battery (EM) – The EM battery is located integral to fixture and is factory pre-wired. See install instructions for proper wiring.
10W constant power Emergency Battery Pack.
Direct fixtures are available for emergency battery (EM) use in 4’ and ≥6. Due to size constraints, EM is not available in 5’ fixtures.
For individual fixtures, emergency option will illuminate the first 4’ section of fixture. For continuous runs, please consult factory to advise on 4’ section intended for emergency use. For fixtures >12’ or if a different configuration is needed, please consult factory.
Emergency test switch is located next to the geartray, behind the lens.
* Emergency battery option is UNV for use with 120V or 277V and is not available for 347V.
* Please note battery pack requires an unswitched hot.
* For EM with sensors, please consult factory.
* If a different configuration is needed, please consult factory.
Note: Wiring may vary slightly due to on-site conditions or local codes. Please follow all safety installation protocols contained within install instructions when installing luminaire.
Page 10 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Lens
Fixture Length
Lit Section* 3” (76mm)
Qty 1 Sensor - Beginning
2 3/8” (60mm)
Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer.
Beginning of Run
Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise
Qty 2 Sensor - Beginning and End (9’ fixtures and longer)
Notes: 1. For spacing between sensors, please consult the sensor manufacturer. 2. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout.
* Lit section will be the fixture length minus 3” for sensor plate.
Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming.
Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.
Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above.
Occupancy Vacancy Daylight Harvesting Driver Compatibility
Enlighted SU-5E-IL (E) √ √ √ DIM
Sensor Switch MSD EZ (S) √ √ √ DIM
Lutron Vive DFCSJ (V) √ √ √ DE1
Sensor Ordering Chart
Quantity Sensor Settings*
x Number of Sensors E Enlighted SU-5E-IL
S Sensor Switch MSD EZ
V Lutron Vive DFCSJ
1 Daylight
2 Occupancy/Vacancy
3 Daylight/Occupancy/Vacancy
* Settings not available with Enlighted
Enlighted SU-5E-IL (E)Enlighted Micro Sensor SU-5E-IL (Independent Lighting) provided as standard with an Enlighted CU-4E-FM Fixture Mount Control Unit integral to fixture. If SU-5E-CL (Connected Lighting) or SU-5E-IoT (Internet of Things) is desired, please contact factory. Occupancy/vacancy, thermal, daylight sensing plus Tunable White, Room & Zone control, Internet of Things (IoT) data collection and reporting control. For full details, please see SU-5E-(IoT/CL/IL) spec sheet on the Enlighted website. Must be paired with a 0-10V driver with auxiliary (DIM driver selection). Commissioning by Enlighted.
*Sensor can control up to 5 drivers. Please refer to driver quantity chart on page 6. Multiple sensors may be required for longer lengths.
Sensor Switch MSD EZ (S)Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with DIM driver selection. Manual control of dimming not available with MSD EZ sensor.
*Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 6. Multiple sensors may be required for longer lengths.
Lutron Vive DFCSJ (V)The DFCSJ-OEM-OCC provides the capabilities of daylight harvesting and occupancy/vacancy sensing. When integrated with the DFC-OEM-DBI (Fixture Contril Digital Link Interface), the sensor is wirelessly compatible with the DE1 Lutron EcoSystem driver. Commissioning bt certified Lutron technician.
*Vive DFCSJ sensor can control up to a maximum of five (5) drivers per sensor. Please refer to driver chart on page 6. Multiple sensors may be required for longer lengths.
Please contact controls manufacturer for details prior to specifying.
Page 11 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory.
The minimum standard lengths for “L” shapes:- L9 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)- L9 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)( Exception is that the L9 can be joined directly to provide a 4’ x 4’ nominal shape)
*For sensors in configurations, please consult factory.
M60LED Direct/Indirect
Standard Direct/Indirect shapes/configurations:
The minimum standard lengths for “T” and “X” shapes:- T9 = 4’ nominal on the short leg and 8’ nominal on the long side- X9 = 8’ nominal for either direction
For patterns and configurations that include a wall-mounted option, please consult factory to identify location, on which side of housing and spacing of brackets required.
Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Project Specific Direct/Indirect shapes/configurations:
Direct/Indirect Lit Corner and Section - Dimensions
L9 T9 X9
Feet/Inch MM Feet/Inch MM Feet/Inch MM
“A” Housing (Outside) 2' - 1 1/4" 642
“A1” Housing (Inside) 1' - 10 15/16" 582
“B” Housing 2' - 1 1/4" 642
* “B1” Ref. 2' - 1/8" 612
“C” Housing 4' - 3/16" 1224
* “C1” Ref. 2' - 1/8" 612
“D” Housing 4' - 3/16" 1224
* “D1” Ref. 2' - 1/8" 612
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16” (1mm) tolerance.
"A" Housing
"A"
Hou
sing
"A1" Housing
"A1"
Hou
sing
"D" Housing
"D"
Hou
sing
"D1"
Ref
.
"D1" Ref."B" Housing
"C"
Hou
sing
"C1"
Ref
.
"B1" Ref.
"A" Housing
"A"
Hou
sing
"A1" Housing
"A1"
Hou
sing
"E" Housing
"E"
Hou
sing
"E1"
Ref
.
"E1" Ref."B" Housing
"C"
Hou
sing
"C1"
Ref
.
"B1" Ref.
Direct sideBottom view
See note See note
See note
L9 - Lit Horizontal corner T9 - Lit "T" section X9ß - Lit "X" section
Indirect sideTop view
Indirect sideTop viewIndirect side
Top view
Direct sideBottom view
Direct sideBottom view
Note: The indirect side of the cable and stem mounted configurations has small unlit sections for suspensions. For wall mounted configurations, the indirect side is fully lit.
Page 12 of 12 (Rev. 11/2021)
L60DI_SS_v2.7
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M60LED Direct/Indirect
Photometry
Note: Due to the amount of variation of lens/distribution options possible, please import and align the individual direct and indirect IES files and group within the photometric program you are using.
CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page 1 (light engine).
Lens multipliers supplied for per foot values listed on page 1 (light engine).
LW - LED Optimized White Lens
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 2804 701 8.9 79
MI - Clear Lens with Microprism Inlay
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 3251 813 8.9 92
NB - LMO Symmetric (Direct Only)
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 3002 751 8.9 85
A2 - LMO Asymmetric 20° Wall Washer (Direct Only)
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 3032 758 8.9 86
A5 - LMO Asymmetric 5° Wall Grazer (Direct Only)
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 2807 702 8.9 79
WB - LMO Wide Batwing (Indirect Only)
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 3926 982 8.9 111
M60 Direct/Indirect
CCT Multiplier
4000K 1.05
3500K 1.00
3000K 0.96
2700K 0.92
CRI Multiplier
90+ CRI 1.00
80+ CRI 1.19
Lens Multiplier
LW 1.00
MI 1.02
NB 1.22
A2 1.26
A5 1.26
BW 1.0
WB 1.40
BW - LMO Batwing (Direct Only)
Light Engine Lumens per 4 foot Lumens per foot Input watts per foot lm/W
1C35 2807 702 8.9 79
top related