machine line drawings for reference - zamboni company · 520 525 526 these references should be...

1 ft

MODEL

552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

Machine Line Drawings for Reference

1 ft

©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

Machine Line Drawings for Reference MODEL

552

1 ft

520525526

©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

= 1 foot

Scale is 1" = 1' on 11” x 17” paper and 1" = 1.54' on 8.5” x 11” paper MODEL

552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

Machine Line Drawings for Reference

1 ft

520525526

MODEL

552©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

Machine Line Drawings for Reference

520525526

These references should be considered as approximate so for accurate measurements, you should examine and measure the machine you intend to wrap/decal.

Following are some of the notable differences between our 500 series machines:

• seat support assembly

• dash

• vertical auger housing motor mount

• fiberglass lid indents

• fiberglass side covers

Some machines may have a plow mounting apparatus on the front which may obscure part of the front panel. All safety labels should be left uncovered or replaced once the wrap/decal is in place.

Should you have any questions, please feel free to contact us.

©Zamboni Company. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc.

MODEL

552