machinist projects (partial) last 7 years pdf
Post on 06-Jan-2017
142 Views
Preview:
TRANSCRIPT
Flange hinge bolts, this flange is 19” OD X 4” thick approximately 400 Lbs
Flange bolt hinges
Flange bolt hinges
Flange bolt hinge / Flange is 19” OD by 4” thick
Howard valve cap lowering tool, tight location and very difficult to handle
Ariel valve cap tool
Caterpillar
Encoder tooling. Made to eliminate the tripod stand and bungee cords
Elongating holes in pillar block bearings (Howard Compressor Station)
Valve cap lowering tool Bethel Storage.
Valve cap hinge bolts
Manual drill with manual down feed (Master Valve Bethel Salt Dome)
KVSRA Pre Chamber seat cleaners
Dyna-probe adapter for Cooper Bessemer GMV / New York Storage
Dresser Rand pre-chamber gasket seat resurfacing tool for a KVSRA. Dresser Rand was going to sale
them 12 new heads. It took .005 to .007 to clean the gasket sealing surface back up.
Solar Turbine fuel injector remover / machined 4 newer ones
Part for Dyna Probe adapter
Windrock (engine compressor analyzer)
Emission Testing
top related