manual/automated side loader side loader - mcneilus...mcneilus-exclusive excalibre™ cylinders help...
Post on 29-Mar-2021
6 Views
Preview:
TRANSCRIPT
MANUAL / AUTOMATED
SIDE LOADER
FLEXIBLE. DEPENDABLE. EFFICIENT.
MANUAL /AUTOMATED SIDE LOADER
PERFORMANCE SPECIFICATIONS (in seconds)*
WORKING RPM @ IDLEArm In 4Arm Out 4-1/2Arm Up 2-1/2Arm Down 2Grabber Open 1Grabber Closed 1Packer Extend 11Packer Retract 5Pack Assist Up 4-1/2Pack Assist Down 3Tailgate Open 17Tailgate Closed 20Body Up 58Body Down 68
*Cycle times may vary slightly
ARM ASSEMBLYArm Reach 6 ftArm Lifting Capacity 500 lb
HOPPER SPECIFICATIONSHopper Capacity 2.7 cu ydHopper Floor 3/16 in. grade 50 steelHopper Floor Wear Area 1/4 in. AR Hardox 400
PACKER/EJECTOR SPECIFICATIONSPacking Face 1/4 in. AR200Wear Strips X-Wear and AR400Follower Panels 3/16 in. AR200
BODY SPECIFICATIONSBody Floor 10-gauge AR200Side Walls 11-gauge AR200Roof 11-gauge AR200
TAILGATE SPECIFICATIONSTailgate Side Walls 1/8 in. AR200Tailgate Rear Wall 1/8 in. AR450
HYDRAULICSPump Tandem pump with HOC and
pack-on-the-go flow control systemPacker Valve Parker VA35 x 2 work sections—
pneumatic operating with pre-coalescing filter
Arm Valve Parker P70 x 5 work sections—electric proportional coils
Oil Reservoir 50 gallonFilter 100 mesh suction filter5 Micron Medium-Pressure Return Line
CYLINDERSPacker Cylinder 4 in. bore x 3 in. rod x 39-1/2
in. strokeTailgate Cylinder 2-1/2 in. bore x 1-1/2 in. rod x 38
in. strokeArm In/Out Cylinders 2 in. bore x 1-1/4 in. rod x 67 in. strokeGrabber Cylinder 2 in. bore x 1 in. rod x 6-1/4 in. stroke
PAINTINGPacker and components steel shot blasted, then primed and painted separeately to provide complete top coat coverage to all areasFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane
McNEILUS WARRANTIESContact your McNeilus representative on warranty details. For more information, go to www.mcneiluscompanies.com
OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)
DESCRIPTION 26 YD (19.9 M) 28 YD (21.4 M) 31 YD (23.7 M)
(A) Overall Length, Tailgate Open 347 in. 8814 mm 361 in. 9169 mm 347 in. 8814 mm
(B) Overall Length, Tailgate Closed 279 in. 7087 mm 299 in. 7595 mm 296 in. 7518 mm
(C) Height: Tailgate Open 145 in. 3683 mm 145 in. 3683 mm 163 in. 4140 mm
(D) Height: Tailgate Closed 100 in. 2540 mm 100 in. 2540 mm 108 in. 2743 mm
Overall Width: Arm Stowed 96 in. 2438 mm 96 in. 2438 mm 96 in. 2438 mm
Minimum Dump Radius 42 in. 1067 mm 42 in. 1067 mm 42 in. 1067 mm
Minimum Alley Width 152 in. 3861 mm 152 in. 3861 mm 152 in. 3861 mm
Grabber Height from Ground 10 in. 254 mm 10 in. 254 mm 10 in. 254 mm
Manual and Automated Routes? This Truck Does Both.
Up to 80% of hydraulic contaminants can enter through the packing cylinders. McNeilus-exclusive Excalibre™ cylinders help prevent hydraulic contamination with a patented tool steel shaver and field-proven seal that significantly minimize problem-causing debris.
FLEXIBLE: Collection routes can be unpredictable
when it comes to what’s sitting next to the curb. The
McNeilus Manual/Automated (MA) Side Loader takes
out some of the guesswork with an automated arm,
plus a manual loading mechanism.
EFFICIENT: WIth a simple-to-operate arm, the Manual/
Automated (MA) Side Loader handles residential cans
efficiently. The low-height hopper sill also allows the
operator to manually throw in the “little extras” that
often come with residential routes. Adding a cart tipper
allows collection from both sides of the street.
This vehicle can also be ordered without the arm as a
strictly manual side loader. The drop frame and lower
hopper sill make it ideal for single-man collection or
recycling routes, allowing the operator to easily and
efficiently dump totes.
Body sizes: 20, 22, 26, 28 and 31 cubic yards
A
B
CD
E
F
B
ALow sill height for easier loading of the “extras”, optional cart tippers allow collection from both sides of the street. Plus, a simple-to-operate tilt dump body.
Arm and packer operation at idle speed keeps noise to a minimum and lowers fuel consumption.
C
With an arm reach of 6-feet, lift capacity of 500 pounds, smooth operation and one-button pickup, it can handle cans of almost any size.
Combining a side arm for automated collection and a low-height hopper for easier manual loading makes this refuse vehicle the most flexible on the market.
Multiplexed and distributed CAN-based controls offer the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display).
D
E
F
G
G
McNeilus is a member of these national purchasing programs.
Quality OEM parts for all makes and models
www.StreetSmartParts.com or 888.686.7278
CONTRACT #112014-MCN
MANUAL / AUTOMATED
SIDE LOADER
FLEXIBLE. DEPENDABLE. EFFICIENT.
MANUAL /AUTOMATED SIDE LOADER
PERFORMANCE SPECIFICATIONS (in seconds)*
WORKING RPM @ IDLEArm In 4Arm Out 4-1/2Arm Up 2-1/2Arm Down 2Grabber Open 1Grabber Closed 1Packer Extend 11Packer Retract 5Pack Assist Up 4-1/2Pack Assist Down 3Tailgate Open 17Tailgate Closed 20Body Up 58Body Down 68
*Cycle times may vary slightly
ARM ASSEMBLYArm Reach 6 ftArm Lifting Capacity 500 lb
HOPPER SPECIFICATIONSHopper Capacity 2.7 cu ydHopper Floor 3/16 in. grade 50 steelHopper Floor Wear Area 1/4 in. AR Hardox 400
PACKER/EJECTOR SPECIFICATIONSPacking Face 1/4 in. AR200Wear Strips X-Wear and AR400Follower Panels 3/16 in. AR200
BODY SPECIFICATIONSBody Floor 10-gauge AR200Side Walls 11-gauge AR200Roof 11-gauge AR200
TAILGATE SPECIFICATIONSTailgate Side Walls 1/8 in. AR200Tailgate Rear Wall 1/8 in. AR450
HYDRAULICSPump Tandem pump with HOC and
pack-on-the-go flow control systemPacker Valve Parker VA35 x 2 work sections—
pneumatic operating with pre-coalescing filter
Arm Valve Parker P70 x 5 work sections—electric proportional coils
Oil Reservoir 50 gallonFilter 100 mesh suction filter5 Micron Medium-Pressure Return Line
CYLINDERSPacker Cylinder 4 in. bore x 3 in. rod x 39-1/2
in. strokeTailgate Cylinder 2-1/2 in. bore x 1-1/2 in. rod x 38
in. strokeArm In/Out Cylinders 2 in. bore x 1-1/4 in. rod x 67 in. strokeGrabber Cylinder 2 in. bore x 1 in. rod x 6-1/4 in. stroke
PAINTINGPacker and components steel shot blasted, then primed and painted separeately to provide complete top coat coverage to all areasFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane
McNEILUS WARRANTIESContact your McNeilus representative on warranty details. For more information, go to www.mcneiluscompanies.com
OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)
DESCRIPTION 26 YD (19.9 M) 28 YD (21.4 M) 31 YD (23.7 M)
(A) Overall Length, Tailgate Open 347 in. 8814 mm 361 in. 9169 mm 347 in. 8814 mm
(B) Overall Length, Tailgate Closed 279 in. 7087 mm 299 in. 7595 mm 296 in. 7518 mm
(C) Height: Tailgate Open 145 in. 3683 mm 145 in. 3683 mm 163 in. 4140 mm
(D) Height: Tailgate Closed 100 in. 2540 mm 100 in. 2540 mm 108 in. 2743 mm
Overall Width: Arm Stowed 96 in. 2438 mm 96 in. 2438 mm 96 in. 2438 mm
Minimum Dump Radius 42 in. 1067 mm 42 in. 1067 mm 42 in. 1067 mm
Minimum Alley Width 152 in. 3861 mm 152 in. 3861 mm 152 in. 3861 mm
Grabber Height from Ground 10 in. 254 mm 10 in. 254 mm 10 in. 254 mm
Manual and Automated Routes? This Truck Does Both.
top related