manufacturing processing materials

1

Manufacturing Processing Materials

By P. Hennessy

November 2007

2

Massachusetts State Frameworks Standards

• 7.1 Describe the manufacturing processes of casting and molding, forming, separating, conditioning, assembling, and finishing.• 7.2 Identify the criteria necessary to select safe tools and procedures for a manufacturing process (e.g., properties of materials, required tolerances, end-uses).• 7.3 Describe the advantages of using robotics in the automation of manufacturing processes (e.g., increased production, improved quality, safety).

3

What is manufacturing?• TheThe Manufacturing ProcessManufacturing Process is used to is used to

change the change the size, shape, combination size, shape, combination and compositionand composition of materials. of materials.

• Is the application of Is the application of thermal, mechanical thermal, mechanical and electrical/chemical processes and electrical/chemical processes of a of a given starting material to make parts or given starting material to make parts or products. products.

• Though manufacturing materials are Though manufacturing materials are transformed into items which have transformed into items which have added valueadded value by means of one or more by means of one or more processing and/or assembly operation.processing and/or assembly operation.

4

Types of Manufacturing Processes

• Thousands of manufacturing processes exist.

• Six classifications of manufacturing– Casting and Molding– Forming– Separating– Conditioning– Assembling– Finishing

5

Casting and Molding• Casting and molding gives materials shape by

introducing a liquid material to a mold.• A casting is the pouring of the material into a

mold. A mold is the cavity that has the shape of the desired object.

A sand mold for a metal trivet

A metal mold for a plastic toy

Pouring molten aluminum into a

sand mold

6

www.fluent.com/software/ polyflow/blow.htm

Extrusion Blow Molding Animation

(from Fluent, CFD software)

Plastic bottles are made using this method.

1. The material is injected between the mold halves

2. The mold closes

3. Air is used to inflate the material to the sides of the mold where it rapidly cools

4. Mold opens and the part is removed and extra material is trimmed

7

Where have you seen casting?Homework: Name at least 8 molding examples you know not shown here.

8

Forming Processes

• Forming materials uses one of two types of devices which are harder than the material being formed. Dies or rollers– A Die is in the shape of the object to be made, by using

pressure it will form the object.– Rollers working in pairs to form round objects from

sheets.

•Forming process applies a force to a shaping device causing the material to change shape.

9

The force applied to a material must be in a specific range for that material

• Elastic range – material will not hold the new shape.

• Yield point – the point that the material will permanently be deformed.

Slide one of two

10

• Deformation range or Plastic range – material will retain the stretched, compressed, or bent form.

• Fracture point – the point that the material will fail or rupture.

The force applied to a material must be in a specific range for that material

Slide two of two

11

Vacuum Forming is accomplished by heating a plastic sheet until it is pliable enough to be vacuumed into a mold.                       

www.pmwproducts.com/ thermoforming.html

Vacuum Forming

www.fluent.com/.../ thermoforming.htm

12

Other forming processes

Extrusion - pushingDrawing - pulling

Rolling - squeezing

13

Separating Process• Removing excess material to make an

object of correct size and shape.

• Material is removed by either machining or shearing.– Machining removes excess material in small

pieces by the motion of the tool against the material.

– Shearing is cutting which is done by blades that slide by each other. Material is removed as one larger piece.

14

Machining examples

Wood Lathe

Drilling

SawingLaser Cutting

Milling machine

Shearing

15

• What is the difference between the first two manufacturing methods forming and casting & molding and the third method, separating?

16

Conditioning• Changing of internal properties is called

conditioning. These processes can make the material harder, softer, stronger or more easily worked.– Mechanical Conditioning Squeezing,

stretching, pounding or bending – Chemical Conditioning change the

properties of a material like rain-x or glass etching

– Thermal Conditioning The most common conditioning aka Heat treating.

17

Thermal conditioning processes

• Hardening – used to increase the hardness of the material. Harden steel is made by heating to a specific temperature and soaked (wait until the entire part is at a uniform temperature) Once heated is rapidly cooling (quenching) in oil or water.

• Annealing - used to soften and remove internal stress in a part. The part is heated to a specific temperature and is allowed to soak. Once heated is then removed and cools slowly to room temperature.

Page two of three

18

Thermal conditioning processes• Tempering - used to relieve internal stress in a part.

Hardening causes internal stress, which will cause the part to crack under use. Tempering temperatures are much lower than annealing temperatures. Used on glass and metal.

• Firing – a thermal conditioning process used for ceramics. This drives internal moisture out of the clay and the grains bond together to make a solid structure. Certain coatings are fired like porcelain enamels.

• Drying – is a common thermal conditioning process. It removes moisture from materials. Ceramics and wood must be dried before they are useful. Drying can happen naturally or be helped by adding heat. Lumber, for example is either dried by air or by kiln.

Page three of three

19

Assembly Processes• The word assemble means “to bring together.”

Most of the things we see are made from two or more parts. – A wood pencil is a total of five parts. The barrel is

two pieces of wood glued together around the graphite. The eraser is held onto the wood barrel by a metal band.

• There are two methods of assembly. – Bonding – Mechanical Fastening

Page 1 of 5

20

Bonding• Fusion bonding – This method uses heat or solvents

to melt the edges of a joint. The materials flow together to create a bond.– Welding is an example of this type of bonding.

• Flow bonding – This method the base metals are cleaned and put together and an alloy is melted and flows between the two parts. When it cools the bond is complete.– Soldering and Brazing are examples of this type of

bonding

Page 2 of 5

21

Bonding• Pressure bonding – This method uses pressure and

often heat to create the bond. Adhesives can be used also in this type and clamps apply pressure until the bond is complete.– Spot Welding is an example where

heat is used and wood glue to build

furniture is an example of an

adhesive bond.

Page 3 of 5

22

Types of Joints• Material Joints – Joints are where parts meet.

Pieces of materials are fastened together at joints. By using different types of joints the strength or holding ability of the adhesive will improve.

Page 4 of 5

23

Mechanical Fasteners• Fasteners – Use mechanical forces to hold parts

together. Friction between the parts can be used. – Press fits are used to hold many parts together such as

bearings on a shaft. – Parts maybe interlocking such as a seam on sheet metal.– Fasteners are the most widely method to hold parts

together. Examples would be: staples, nails, screws, rivets, pins and nails.

Page 5 of 5

24

Finishing Processes• This is usually the last step of the secondary

processes. These processes protect the product and enhance their appearance.– Converted surface finish changes the surface to protect

the product. Anodizing will cause aluminum products to oxide which will prevent further erosion.

– The other finishing method applies a coating to the product. These finishes applied to the product will protect it as well as add color.

– Finishes are applied by:• Dipping• Plating• Spraying• Flow Coating

25© Goodheart-Willcox Co., Inc.

Automating and Controlling Processes

• New machines can load materials, adjust tool feeds and speeds, and do many other tasks humans once did.

• These machines make up systems called automation.

• Automation includes robots, programmable logic controllers (PLCs), computer-controlled machines, and artificial intelligence (AI) systems.

26© Goodheart-Willcox Co., Inc.

Automation Parts

• Industrial robots are commonly used for welding, painting, assembling, moving materials and parts, and inspecting products.

• Programmable logic controllers (PLCs) have three basic functions: input, control, and output, all programmed by a technician.

27

End of Show

28www.devco-design.com/ bl-mold.htm

Blow Molding