mediator ii mediation conference system

Mediator II Mediation Conference System

Using the Mediator II is as easy as 1, 2, 3 ...1. Dial out to each participant2. Place parties into sidebar caucus groups for private discussions3. Bridge all parties together!

• proven FORUM Flex audio conferencing bridge technology• easy to use Graphical User Interface• tailored turn-key audio mediation system

Mediator II Mediation Conference System

LAN

Mediator #1 Mediator #2

Flex Bridge

PBXPSTN

Typical System Configuration

Mediation II Specifications

Features

Port Capacity 16 minimum up to 32 ports per bridge (8 ports/card), two independent Mediator Clients per bridge

• easy to use GUI (touchscreen optional)• call in to bridge in meet-me mode or dial out to each participant• easy Web-based setup• each Mediator can control up to 4 sidebars or caucus groups• instant “Bridge All” of participants from sidebar caucus groups to one conference• Mediator can be placed “ON-HOLD”

• participants can page mediator by pressing *46• Mediator sees “Page” indicator on screen, re-enters the conference

• Mediator Controls:• Dial out, add/drop• Move to caucus• Hold line, mute line, drop line, terminate conference• Mute all• Bridge All

Interface: 2-wire loop start/ground start lines Line Interface Connector: 50-pin Amphenol on rear of chassisDisconnect Supervision: loop current/dial tone/reorder tone/dtmf APower: 115/220 VAC 50-60 Hz 130 watts maxSize: 16”H x 19”W x 12”D (Wall or Rack mountableWeight: 11.5 lbs with power supply plus 1.75 lbs per card