microprogram control. a control word (cw) is a word whose individual bits represent various control...
Post on 19-Dec-2015
223 Views
Preview:
TRANSCRIPT
• A control word (CW) is a word whose individual bits represent various control signals
• Sequence of CWs correspond to the control sequence of machine instruction constitute microroutine
• Individual CW in the microroutine are referred as microinstruction
• The microroutines for all instrution in the instruction in the instruction set of computer are stored in special memory called control store
• Control unit generate control signals for any instruction by sequentially reading CW of microroutine from control store
• μPC is incremented in following situation1.New instruction-IR, μPC will be loaded with
starting address of microroutine2.Branch instruction is encountered& branch
condition is satisfied, μPC is loaded with branch address
3.End microinstruction is encountered , μPC is loaded with address of first CW in microroutine
• Sequence of control signals to be generated by the controller can be stored in special ROM also called control memory(CM)
• Output of CMDR provides desired control signals
• Control ROM is sequentially accessed by incrementing CMAR
MICROINSTRUCTION
• Assigning 1 bit to each control signal results in long microinstruction bcoz number of required signal is usually large
• Usually only few bits are set to 1 in any microinstrution
• Space is poorly used• To avoid this,signals can be grouped such that
mutually exclusive signals are placed in same group
MICROPROGRAM SEQUENCING
• microprogram is is easy to write bcoz software techniques is used
• But 2 disadvantages are encountered1.Separate microroutine for each instruction
lead to large control store2.Execution time is longer bcoz it takes more
time to carry out branch instruction
Encoding of control signals
• Different formats of microinstruction depending on the encoding of control signals.
1. Horizontal/vertical formats2. Functional encoding3. Resource encoding4. Direct versus indirect encoding
• Horizontal Format:– Minimal encode scheme,in which many resource
can be controlled with single microinstruction– Large number of control fields– Characterized by limited encoding and ability to
express high degree of parallelism
• Vertical organization:– Highly encode scheme ,specify small number of
control function
– limited number of control fields– Characterized by high degree of encoding and
limited ability to express parallelism
Functional Encoding
• The micro operations executed in a data path of a CPU may be categorized under different function names such as Shift function, Add function, Logical functions, Input-Output, etc
• Multiple control bits associated to control a specified function
Resource encoding
• The CPU data path consists of a set of interconnected RTL components.
• Each of these components or a subset of such components viewed as a resource.
• If control signals associated with such a resource are mutually exclusive, then they can be encoded in a single control field.
• Direct->control field directly generates control signals via decoder
• Indirect->control field A serves as a field decode logic which further steers.decode first level decode logic of another field(B)
• Indirect,which have different types of control information from same control field
• μAR-Microinstruction Address Register• Μar which is loaded from next address field• Next address bits are via OR gates to μAR,so
that address can be modified on basis of the data in IR,external i/p,condition codes
• Decoding circuit generates starting address of given microroutine in basis if OP code in IR
PREFETCHING MICROINSTRUCTION
• Drawback of microprogram control leads to slower operating speed bcoz of the time take to fetch microinstruction
• Faster operation is achieved if nect microinstruction is prefetched while the current one is being executed
Micro instruction execution
Two basic actions1. Generating next microinstruction address and
fetching micro program instruction from control memory by this address
2. Executing the micro operations controlled by different signals encoded in various control fields of the microinstruction
1. Decoding and applying control signals on the CPU data path2. Executing the intended micro operations controlled by the
signals3. Storing the output in the destination register specified in the
micro operation on the CPU data path
Mono phase and Poly phase operation
• In a micro operation cycle, a micro program control unit implements the sequence of actions under 4 different phases.
• If the micro instruction cycle is controlled by a single clock pulse which synchronizes all the control signals ,then the mode is termed as mono phase operation
• If each of the phases is controlled by a different phase of a clock ,the mode is referred as poly phase operation
Micro-programmed Control Unit -Advantages
1. A micro-programmed control unit is flexible and allows designers to incorporate new and more powerful instructions as VLSI technology increases the available chip area for the CPU
2. allows any design errors discovered during the prototyping stage to be removed
top related