miprobeam

Nr MB/14-02

MADE IN EU

Mipromet is a company with many years’ experience in the production of lifting slings and equipment for lifting loads. A significant part of the company's production profile is made up of lifting beams and specialised gripping devices.

The design process takes place based on the Machinery Directive and EN European standards, which, in combination with the experience of the design team and computer assistance, guarantees an optimal product vision at this stage.

We present every design of ours to the client for approval, so that we can take into account any requirements that might arise after the design is visualised and dimensioned. The actual production of an approved design is performed by qualified personnel using high quality certified materials and computer-controlled machines. This has an influence on dimensional accuracy, optimisation of shapes and dimensions, and on product aesthetics.

The final product that is delivered for use is permanently marked with: the manufacturer's mark, the CE mark, its lifting capacity, factory number, year of production, self-weight, and includes all appropriate documents, i.e. Declaration of Compliance with Machinery Directive 2006/42/EC, quality control documentation according to EN 10204 and the instruction manual. The technical documentation for every product is kept at the company as well, and in the case where it is necessary to perform any maintenance, this allows for error-free production of spare parts.

The satisfaction of our customers, as shown in their repeat orders, is the best recommendation of our products.

You can look at examples in our extensive gallery: www.mipromet.pl/pl/gallery

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

TYPELength of the spreader beam (m)The angle between the

sling leg and vertical direction

EXAMPLES OF CONFIGURATION:

Components list:

TYPE

ENDING ELEMENT

(selectable by customer)CONNECTING ELEMENTS

BOW SHACKLES

BOLTS, WASHERS AND NUTS 4 x the number of joints

4 x the number of joints

4 x the number of joints

4 x the number of joints

4 x the number of joints

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

METHOD OF LIFTING BEAM HOOKING:

TYPE A

TYPE B

TYPE C

Length of the spreader beam (m)maximum load (t)

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

METHOD OF LIFTING BEAM HOOKING:

TYPE A

TYPE B

TYPE C

The range of manufactured length L (m)maximum load (t)

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE M - Hooks

TYPE N - Hooks

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

TYPE M - hooks

TYPE N - hooks

TYPE O - welded hooks

TYPE P - welded hooks

TYPE R - holes

TYPE S - holes

TYPE T - double holes

TYPE U - double holes

TYPE W - rollers

TYPE X - holes

TYPE Y - welded hooks

TYPE Z - upper hooks

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

METHOD OF LIFTING BEAM HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

METHOD OF LOAD HOOKING:

TYPE M - hooks

TYPE N - hooks

TYPE O - hooks and holes

TYPE R - holes

TYPE S - holes

TYPE T - double holes

TYPE U - double holes

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

Maximum width S (m.) to 4,0m

METHOD OF LIFTING BEAM HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

TYPE O - welded hooks

METHOD OF LOAD HOOKING:

TYPE M - hooks

TYPE R - holes

TYPE T - double holes

TYPE Y - welded hooks

TYPE X - holes

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

Maximum width S (m) to 4,0m

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

TYPE M - hooks

TYPE R - holes

TYPE T - double holes

TYPE O - hooks and holes

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

Maximum width S (m) to 4,0m

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

TYPE M - hooks

TYPE R - holes

TYPE T - double holes

TYPE O - hooks and holes

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

Maximum width S (m) to 4,0m

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

TYPE A - central lifting eye

TYPE B - sling

TYPE C - central lifting eye and sling

TYPE D - extreme lifting eyes

TYPE E - adjustable

TYPE M - hooks

TYPE R - holes

TYPE T - double holes

TYPE O - welded hooks

TYPE X - holes

TYPE Y - welded hooks

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

maximum load (t)

The range of manufactured length L (m)

Maximum width S (m) to 4,0m

METHOD OF LIFTING BEAM HOOKING:

METHOD OF LOAD HOOKING:

TYPE R - holes

TYPE M - hooks TYPE A - the fixed points

TYPE B- rotation points

maximum load (t)

maximum load (t)

Range of manufactured length L and width S (m)

The range of manufactured length L (m)

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

for lifting the containers for lifting the containers

maximum load (t)

maximum load (t)

Means to lift the containers Means to lift the containers

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

for lifting the containers for lifting the containers

maximum load (t)

maximum load (t)

Means to lift the containers Means to lift the containers

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

for lifting the Big-Bag for lifting the Big-Bag

maximum load (t)

maximum load (t)

Means to lift the Big-Bag Means to lift the Big-Bag

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Complies with the regulations of the Machinery Directive: 2006/42/WEThe product is stamped: manufacturer's mark, mark, serial number, year of manufactureMade according to the harmonized standard: EN13155

Query:Company name :

Address :

Contact person :

Telephone number :

e-mail :

The quality documentation :

Instructions for use according to EN 13155

Accept documents according to EN 10204:

Certificate of quality 2,1 Acceptance certificate 3,1

Additional requestmagnetic particle testing MTultrasonic testing UT

Guarantee for 24 months (standard)

Protective coating, storage and transport:

- Protective coating:

Painted colour RAL 1200

Painted colour RAL .........................

Hot-dip galvanized

- Storage:

Additional stand for lifting beam

Transport ex-warehouse:

Dealers

Recipients

Refers to lifting beams

The type of lifting beam :

Maximum load :

Length L :

Length L (min/max) :

Pitch R :

Width S :

Width S (min.max) :

Pitch P :

Internal width W :

Number x length of elements : 2x Ending element

Method of lifting beam hookingtype :

Method of load hookingtype :

Number of points to load hooking :

Kind of asscesories e.g. hooks, shackle :

The number of lifting beams arms :

The type of container

Please send your order to e-mail biuro@mipromet.pl, or fax +48 12 385 79 51

Mipromet Spółka z o.o.ul. Długa 6332-091 Masłomiąca

Regional Court for Kraków- ŚródmieścieNo. KRS: 0000391888Share capital 50000,00 zł

Company ID: 121840344VAT: 5130226610

www.mipromet.plbiuro@mipromet.pl

+48 12 388 50 15+48 12 388 55 79

ee

k