mirror shoe cabinet (1800mm) assembly instructions · mirror shoe cabinet (1800mm) assembly...

Size : (W)500 x (D)300 x (H)1800 mm Colour : Black / White / Oak

500

1800

Thank you for purchasing the MIRROR SHOE CABINET.Please read the instructions carefully to ensure safe operation of the product.

Page 1 of 10

300

Batch No : PO# 2759

MIRROR SHOE CABINET (1800MM) ASSEMBLY INSTRUCTIONS

Page 2 of 10

it is recommended this weight is not exceeded. Due to the size of this product we recommend that is assembled in the room intended for use.When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assemblyUnwrap all packaging materials and place the components on top of the carton box or not on a clean floor toprevent it from scratching.Check the pack and make sure you have all the parts listed.Ensure that this product is fully assembled as illustrated before use.Check all screws or bolts are tightened and inspect regularly.This product should only be used on firm, level ground.Keep small parts out of reach of children.Make sure the legs remain in contact with the ground.Tools not included.

DO NOT use power tools to construct this product.DO NOT tighten screw until fully assembled.DO NOT over tighten screw or bolts.DO NOT use this product if parts are missing, damage or worn.DO NOT stand or sit on this mirror shoes cabinet.The chest must be fitted using the wall brackets provided to avoid accidents and possible serious injuries if the item falls over or tips over during useAlways ensure the wall area to be drilled is free of electrical wires, water and gas pipes.

Never use scourers, abrasives or chemical cleaners.To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product.

This product is intended for a maximum weight of 25.8kgs. distributed evenly throughout the cabinet.

Wall fixings supplied are suitable for solid walls. For other types of wall suitable fixings must beobtained separately . If in doubt please consult a qualified tradesperson

Side Panel (L) (15 x 298 x 1800mm)A 1B Side Panel (R) (15 x 298 x 1800mm) 1C Top Panel (15 x 298 x 470mm) 1D Bottom Panel (15 x 298 x 470mm) 1

E Front Bar Panel (15 x 60 x 470mm) 2

G Door (15 x 495 x 1736mm) 1F Rear Bar Panel (15 x 60 x 470mm) 2

Y Back Panel (2.5 x 248 x 1736mm) 1

Page 3 of 10

A

D

E

B

C

Y

Y

GF

F

E

5

3

3x

gHinges Outside

5/8”

16x

aCSK Screw

M4.7 x 38mm8x

cWooden Dowel

D6 x 30mm

16xe

Csk Screw

M3.5 x 16mm46x

dNail Pin

(26mm)4x

fNail Leg

5 x 8 x 13.5mm

Page 4 of 10

2x

iL-Mounting

Bracket

16x

jSticker19mm

2x

hWall Plug

1x

lAluminium Handle

32mm Hole2x

mDoor Buffer

10mm9x

kMetal Rod

M5 X 490mm

2x

bCSK Screw

M4 x 38mm

STEP 1

STEP 2

8 x

c

Parts Required QtyPanel (E ) 2

Page 5 of 10

b

Parts Required QtyPanel (G) 1

c

3 x

g

6 x

eg

e

STEP 2

Parts Required QtyPanel (A) 1

Panel (C) 1

Parts Required QtyPanel (D) 1

Panel (F) 2

Parts Required QtyPanel (E) 2

STEP 3

Page 6 of 10

9 x

ki

e

8 x

a

a

k

STEP 5

STEP 6g

f

f

Parts Required QtyPanel (F) 1

Parts Required QtPanel (B) 1

Page 7 of 10

g

46 x

dd

a

4 x

8 x

c

f

d

f

STEP 7

STEP 8

Page 8 of 10

Parts Required QtyPanel (F) 1

Parts Required QtPanel (G) 1

2 x

e

2 x

h

i

b

e

h

2 x

a

2 x

i

6 x

e

IMPORTANT THE CABINET MUSTBE FIXED TO THE WALL BEFORE FITTING THE DOOR

• Always ensure the wall area to be drilled is free of electrical wires, water and gas pipes.

obtained separately . If in doubt please consult a

STEP 10

STEP 9

Page 9 of 10

2 x

e

16 x

j

1 x

l

2 x

m

m

l

m

j e

Your MIRROR SHOES CABINET is now completely assembled

Page 10 of 10