mobile hammer mill blue shark mobile, flexible …... mobile, flexible powerful the ideal solution...
Post on 30-Jan-2020
1 Views
Preview:
TRANSCRIPT
www.zato.it
MOBILE, FLEXIBLEPOWERFULTHE IDEAL SOLUTION FOR THE TRANSFORMATION OF
MEDIUM-HEAVY SCRAP INTO HIGH QUALITY PROLER,
IN ITS MOBILE VERSION.
Mobile hammer mill BLUE SHARK
RECYCLING
THE IDEAL SOLUTION FOR THE TRANSFORMATION OF MEDIUM-HEAVY SCRAP
INTO HIGH QUALITY PROLER, IN ITS MOBILE VERSION.
MOBILE, FLEXIBLE, POWERFULThe idea of projecting and realizing a mobile hammer mill comes from the a new philosophy, requested from a market more and more attentive to the developments of the recycling field. ZATO Mobile Shredder is definitely solid. It is mounted on two flanked trailers: this is allows to simply connect the cardan joint from the trailer where the shredder body is assembled with the trailer where the engine/joint group is located.Unlike as it was in the past, when the idea of a shredder was associated with enormous outputs of fixed plants, the perspective of easily moving from place to place with the shredder in order to be able to process the material cutting down transport costs makes the concept of mobile shredding innovative and winning.
BLUE SHARK
The mobile shredder is the best solution for one who wishes to enter a foreign marker, leaving behind old business structures, which rewarded just those who could stockpile quantities big enough to load entire ships.It is now well-accepted that 50% of the scrap devoted to export is transported in containers unlike as in the past. That means that with a mobile shredder there is a real possibility to process material and selling it at its best price, thus entering the sales market circuit.The mobile shredder is the successful choice for those who normally pressed or sheared their material, losing the possibility of recovering non-ferrous metals.
Mobile hammer millRECYCLING
WIDE HOPPER FOR MATERIAL LOADING
UPPER GRIDS’ CAP OPENINGROTOR (WITH OR WITHOUT PROTECTION SHIELDS)
RAPID DISCHARGE AND DAMPERS
3862,93
Ø 1200
5540
,50
8116
34802695
15049,83
11000
30061,97
14746
1000
2540
1334
2540
3197
,07
1400
1760
4,18
10925
3926
,94
3069
3301
944
3862,93
Ø 1200
5540
,50
8116
34802695
15049,83
11000
30061,97
14746
1000
2540
1334
2540
3197
,07
1400
1760
4,18
10925
3926
,94
3069
3301
944
HYDRAULIC JOINT
HYDRAULIC FEEDING PUSHER
HAMMER POLES EXTRACTOR
SHREDDER’S BODY
FERROUS MATERIAL CONVEYOR BELT
MAGNETIC DRUM
WASTE/METALSCONVEYOR BELT
DUST FILTER
REDUCTION UNIT AND HYDRODYNAMIC COUPLING
Inside the steel electro-welded box you will find a pair of gears, the body of the hydro-dynamic coupling, hub, input shaft, output shaft and hub, oil tank, fuel pump, the coupling, lubrication pump, bearings, two speed detectors (input and output), oil level detector and filters, oil pressure sensor and alarms, and air heat exchanger. The hydro-dynamic coupling with draining system allows to disconnect the engine from the load.This results in remarkable advantages:
- No – load engine start – up- Gentle loading start – up- Overload absorption- Impact on reduction unit is dampened- Absorption of torsion vibrations- Large radial load capacity- Control of the torque delivered at start – up- Long operating life since there are not friction pieces
undergoing wear and tear.
In traditional methods, the sequence of the engine components is as follows:Engine, joint coupling and hydraulic joint.In this way, the rotor is coupled to the joint by means of the cardan shaft.Since there is no mechanical coupling inside the joint, just contact via oil, the joint absorbs all impacts transmitted by the rotor without transmitting them in turn to the reduction unit. Thus, the reduction unit is protected against damage.Instead, in the ZATO solution, the sequence of components is as follows: engine, reduction unit coupling and hydraulic joint.In this way the rotor is coupled to the joint by means of cardan shaft.Since there is no mechanical coupling inside the joint, just contact via oil, the joint absorbs all impacts transmitted by the rotor without transmitting them in turn to the reduction unit. Thus, the reduction unit is protected against damage.
SHAFT AND HAMMERS
The 12 hammers are hinged onto the 7 discs of the rotor by 4 steel shafts and steel supports designed and manufactured by Zato. The bearings with double row of rollers are lubricated by an oil circuit. Steel spacers separate the discs on the rotor and the entire assembly is fixed with bolts to ensure better elasticity and longer life. Each disc is externally covered with special anti-wear material.Upon request, the rotor is supplied with hammer protections shields that help increase the moment of inertia, thus resulting in a significant increase in production per hour. REF. 5
INTERNAL STEPS
The machine body, fully shielded with strong Hardox 400 sheets, is structured so that the material receives strong shocks inside it; the action of the rotor also helps to crush the material.REF. 4
RAPID DISCHARGE
Inside the cover, a hydraulic bulkhead – the rapid discharge – serves as an outlet to eject those heavy blocks which have not been shredded.REF. 3
DAMPERS
The plant leans on special bearing in dampening material constantly receiving a significative damping strength.In this way the level of vibrations is maintained within the limits established by law, hence respecting safety criteria. REF. 2
OPENING THE CAP OF THE UPPER GRIDS
The two upper sections are closed and locked by means of hydraulic pins, driven by proportional solenoid valves controlled via a push-button panel and supplied by the control unit. Hydraulic cylinders open and lock these pins.When they are operated, the cylinders push the cap upwards so that you can safely and easily work on the grids.REF. 1
REF 1
REF 2
REF 3
REF 4
PLC/RADIO REMOTE CONTROL
The adjustment system actively and constantly acts on the rotor. It slows down or increases revs automatically depending on operating conditions, on the friction received at the milling stage, and on the type of material at the crushing stage. The radio remote control allows operators to manually control the machine if necessary: it powers the machine on or off and activates the rapid discharge function. In the HP3000 model, fitted with a movable rotor, the machine-supply-rotor interaction is adjusted by the PLC, which receives all energy data and perfectly controls how the rotor approaches or moves away from the grid in automatic mode and during milling. Thus, the size of the materials is set and hammer wearing is optimized. For safety at work and improved performance. And low management costs.
REF 5
SWITCHBOARD
JOINT AND MOTOR GROUP
OUTPUT MATERIAL
TRAILER FOR TRANSPORT
NOTES
NOTES
V.01
_201
4
ZATO S.R.L. Via Campi Grandi, 23
25080 PREVALLE (BS) - Italy
-
ph. +39 (0)30 6461899 r.a.
fax +39 (0)30 6801897
BLUE SHARK
www.zato.it
Mobile
top related