mot.ori.zei1. c..elluicjrlpleated shades somfy motors can...
Post on 20-Jun-2020
2 Views
Preview:
TRANSCRIPT
24V DC (Low Vollage) ,
-----------------------_ ...
,= •. ~Mot.ori.zei1._C..elluICJrlPleated Shades Somfy motors can motorize various types of cellular and pleated type shades including: 3/8 11 Double Cell Light Filtering and Double Cell Blackout %" Double Cell Light Filtering and Double Cell Blackout 3/4 11 Double Cell Light Filtering and Double Cell Blackout
Choose the \tveight chart that corresponds to your shade
.••••_-
••• .... ............ ""
.. :........ ~.
• :mUml'li.L-.J~'JC' ••••_.
Identify compatible motor and power source
~,---_8a't_e'YP--,,----owe_red---J ___ orPJug-ln III ~m."" Be sure to choose the motor that
I ,f"
is both compatible with your end .' * •• lIII
II product size and also offers your preferred power source, which is
120VAC Iisted to the right of the motor.Plug-in or In-Wall Wired
.}_..,__." _.::=: ~_".,_"" See the Understanding Power Contact Somfy for application (dimensions) section for additional information not denoLed in chart above
about each power source.
Choose you r control
After choosing your motor, you then need to choose your control. Choose a control based on your preference, be sure to verify that the control is compatible with your specified motor solution. Icons representing compatible control technologies are shown next to each motor. Handheld Remotes Page 83 RTS WireFree™ Wall Switches Page 91 Wired Wall Switches Page 95 See the Understanding Controls Section for additional information about choosing your control.
59 -~.~.._---_ •.. _--------
- -- - -
Cellular Shade 3/8" Double Cell Light Filtering I WIDTH OF SHADE (INCHES) I
ElElEI.ElIDIlIEI••mlmJmlmllEilm·
Battery Powered or Plug-in
24V DC (Low Voltage) Plug-in or In-Wall Wired II
120VAC Plug-in or In-Wall Wired II] '"'A'A'O
- ~ -~---.::::.._=-- -- - --- ~.-_.~- Contact your fabricator or Somfy for application - . - - . (dimensions) not denoted in chart above.
~
• WireFree CT32: Calculations based on use of Rollease0 "Spears and Traversing Shaft" style cord take-up system
i. Sonesse™ 30: Calculations based on use of Somfy CTS 40 system min. finished width· (OB 20")
Sonesse™ 50: Calculations based on use of Somfy CTS 50 system min. finished width· (Standard Wired Motors - OB 35") ( RTS and ILT Motors - 08371/4")
Above chart calculations are based on use of 318 inch double cell light filtering fabric (approx..76 ozJsq ft.) and associated bottom bar weights.
The above chart is for reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
60
CeUular Shade 3/8" Double Cell Blackout I WIDTH OF SHADE (INCHES) I mmlmlmmElIiIEllDlDlmmJlmmllllml' m -.-": .~- .-" --,.' .-_. .-'
EI • •&I • ==-:..::;=~==.:
Ell • ill'm GEl ~1iI ~EIB5ID ~. f :r: 1m ~mJ
1m 1m III 1m
120V AC Plug-in or In-Wall Wired
Contact your fabricator or Somfy for application (dimensions) not denoted in chart above.
• WireFree CT32: Calculations based on use of Rollease'" "Spears and Traversing Shaft" style cord take-up system
Sonesse™ 30: Calculations based on use of Somfy CTS 40 system min. finished width - (OB 20")
Sonesse™ 50: Calculations based on use of Somfy CTS 50 system min. finished width - (Standard Wired Motors - OB 35") ( RTS and ILT Motors - OB 37 1/4")
Above chart calculations are based on use of 318 inch double cell blackout fabric (approx. 1 oz.Jsq ft.) and associated bottom bar weights.
The above chart is fo~ reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
61
Cellular Shade W' Single Cell Light Filtering I WIDTH OF SHADE (INCHES)••••••••••••••••I
'.
• Battery Powered or Plug-in I=====::::
24V DC (LOW Voltage) Plug-in or In-Wall Wired II
120V AC Plug-in or In-Wall Wired II '"/MNeO
Contact your fabricator or Somfy for application (dimensions) not denoted in chart above.
• WireFree CT32: Calculations based on use of Rollease'" "Spears and Traversing Shaft" style cord take-up system
Sonesse™ 30: Calculations based on use of Somfy CTS 40 system min, finished width - (OB 20")
Sonesse™ 50: Calculations based on use of Somfy CTS 50 system min, finished width - (Standard Wired Motors - OB 35") ( RTS and ILT Motors - OB 37 1/4")
Above chart calculations are based on use of 1/2 inch single cell light filtering fabric (approx..48 oz.lsq ft.) and associated bottom bar weights.
The above chart is for reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
62
Cellular Shade %" Single Cell Blackout I WIDTH OF SHADE (INCHES) I
••••mEl.mmlIlmlmlmlmlmlml. ,. . .
EI -, m III ~mGID ~. ~m ~m ~III f- lIDI
~mI mI IE] mI 1m
Battery Powered or Plug-in I
24V DC (Low Voltage) Plug-in or In-Wall Wired II
120V AC Plug-in or In-Wall Wired II. Contact your fabricator or Somfy for application (dimensions) not denoted in chart above.
WireFree CT32: Calculations based on use of Rollease® "Spears and Traversing Shaft" style cord take-up system
Sonesse'M 30: Calculations based on use of Somfy CTS 40 system min. finished width - (OS 20")
Sonesse,M 50: Calculations based on use of Somfy CTS 50 system min. finished width - (Standard Wired Motors - OS 35") ( RTS and ILT Motors - OS 371/4")
Above chart calculations are based on use of 1/2 inch single cell blackout fabric (approx..918 oz.!sq ft.) and associated bottom bar weights.
The above chart is for reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
63 ------- ---------------------~
Cellular Shade 3/4" Single Cell Light Filtering I WIDTH OF SHADE (INCHES) I
mmmEl.ID.IDElEIlmlmJlEllElmlmI c •.Ell .--. -~ 1-" --- .. I~ .~ --;' n.. - ...
m I I, Ell Ell
ill'1II ~ID ~1iI ~mV5E1 ~. f
0m1 ~ BEl
lEI 1m lEI 119
Battery Powered or Plug-in
24V DC (Low Voltage) Plug-in or In-Wall Wired
120V AC Plug-in or In-Wall Wired
Contact your fabricator or Somfy for application (dimensions) not denoted in chart above.
• WireFree CT32: Calculations based on use of Rollease" "Spears and Traversing Shaft" style cord take-up system
Sonesse™ 30: Calculations based on use of Somfy CTS 40 system min. finished width - (OB 20")
Sonesse™ 50: Calculations based on use of Somfy CTS 50 system min. finished width - (Standard Wired Motors - OB 35") ( RTS and ILT Motors - OB 371/4")
Above chart calculations are based on use of 3/4 inch single cell light filtering fabric (approx . .48 oz.lsq ft.) and associated bottom bar weights.
The above chart is for reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
64
Cellular Shade 3/4" Single Cell Blackout _ I WIDTH OF SHADE (INCHES) I
mmm.mmmElIIIElmlmJEDmllEllm, m I" I I m I I" m I I"•ill'EI ~m ~1iI ~EI V5 IIIoEII f
~mI ~mJ
ED lEI lEI 1m
Battery Powered ] III or Plug-in
~~~~~~ .._-~ 24V DC (Low Voltage) •
Plug-in or In-Wall Wired •. _
120VAC Plug-in or In-Wall Wired II 'N"~"'D
Contact your fabricator or Somfy for application (dimensions) not denoted in chart above.
• Wi reFree CT32: Calculations based on use of Rollease'" "Spears and Traversing Shaft" style cord take-up system
r Sonesse™ 30: Calculations based on use of Somfy CTS 40 system min. finished width - (08 20")
Sonesse™ 50: Calculations based on use of Somfy CTS 50 system min. finished width - (Standard Wired Motors - 08 35") ( RTS and ILT Motors - 08 37 1/4")
_~, Above chart calculations are based on use of 3/4 inch single cell blackout fabric (approx..887 oz.lsq ft.) and associated bottom bar weights.
The above chart is for reference only and may not be representative of certain fabric offerings. Results may vary depending on cellular shade application.
If using cord take-up systems other than listed above, consult with your fabricator for shade size limitations.
65
top related