movable solar trackers...compact design allows 400 solar panels mounted on tracker frames to be...
Post on 11-Apr-2020
0 Views
Preview:
TRANSCRIPT
LOWER COST, LOWER RISK, CLEAN ENERGY
Nomad solar trackers make solar power a cost-effective alternative to expensive fossil fuels and unreliable grids in remote locations. Quick to install and easy to move, Nomad solar trackers are ideal for a variety of applications including powering remote industries, water pumping, off-grid hybrid systems and short-term deployments.
Nomad solar trackers combine the gains from tracking the sun with the flexibility of mobility to deliver the lowest levelized cost of energy where project installation costs are high, or project life is short.
Manufactured by the leaders in solar innovation, Nomad trackers are specifically designed to be movable, durable and high performance.
MOVABLE SOLAR TRACKERS
© 2019 Cambridge Energy Partners Ltd. www.cambridge-ep.com
DATA SHEET
“Nomad trackers are specifically designed to be movable, durable
and high performance.”
© 2019 Cambridge Energy Partners Ltd. www.cambridge-ep.com
KEY BENEFITS OF USING NOMAD
Easy to pack up and move without leaving a trace, which reduces the risk of the asset becoming stranded. Movable assets enable new business models, including short-term PPAs and rental solar.
MOVABLE
FAST DEPLOYMENT
Delivered to site prefabricated for fast and easy installation across a wide range of challenging site conditions. Installation is up to 3x faster than traditional solar trackers, which lowers labour costs and time on site.
DATA SHEET | NOMAD TRACKER | 1
TRACKS THE SUN
Follows the sun from East to West to generate up to 35% higher energy yield and flatter generation curves than fixed-tilt solar systems.
INCREASED YIELD
Mounted with bifacial modules that collect solar energy from the front and back to increase energy yield by up to 20% on top of solar tracking gains.
LOW-COST TRANSPORT
Compact design allows 400 solar panels mounted on tracker frames to be transported per 40-foot high-cube container, up to 40% higher transport density than traditional systems.
Prefabricated to the highest standards in a controlled factory environment, Nomad is built to survive tough conditions for over 25 years.
DURABLE
EXPERT DESIGN
Designed by recognized solar tracking industry experts, with over 2 GW of designs installed across North America, Europe, and South America.
Using our Nomad technology and unique expertise we partner with companies to evaluate and implement solar energy in a sustainable way.
We guide customers through the process of implementing solar including feasibility, financing, execution and operation.
Our focus on the full system lifecycle lowers costs and eliminates waste over the 25-year life of our equipment. Prefabricated solar simplifies design, installation and redeployment
Nomad factory Transport to site
Sell or relocate
Recycling facility
Retire(after 25 years)
Deploy and connect AC
Pack up Operate and maintain
Panels
Electronics
Steel
ELECTRICAL
Maximum PV Voltage 1500 VDC
Recommended string configuration 2 x 20 module strings
MOTOR
Voltage 24 VDC
Current at rate load 6 A
Current at extreme load 12 A
Duty cycle 15%
ELECTRONICS
Voltage 90~305 VAC
Current 2 A
Frequency 47~63 Hz
Communications RS485 / Zigbee
GENERAL
Major installation equipment 2.5 tonne crane or forklift
Installation time Approx. 2 hrs/ 15 kWp unit with 4-person team
Pack-up time Approx. 1.5 hrs/ 15 kWp unit with 4-person team
Land required per 1 MW 1.5 to 2.1 Ha
Warranty 5 years standard, extendible to 20 years
© 2019 Cambridge Energy Partners Ltd. www.cambridge-ep.com
DATA SHEET | NOMAD TRACKER | 2
CHARACTERISTICS
MECHANICAL
Tracking technology Horizontal single-axis tracker with independent rows
Solar tracking method Astronomical with backtracking
Tracking range ±60°
Drive system Linear actuator
Module 72-cell bifacial (375 Wp standard)
Table size 40 modules (15 kW standard); 4 sections of 10 modules in 2 x portrait
PV module attachment Pre-installed – Riveted
Foundation type Ground anchors as standard, other options available
Wind design limit Up to 150 km/h
Safety stowing Automated safety stowing
Transport density 10 units per 40-foot HC container (150 kWp standard)
Weight unit Nomad 2,468 kg
Operating temperature -30 °C to 70 °C
Storage temperature -50 °C to 70 °C
Maximum installation slope Up to 5% N-S without additional bracing, up to 15% N-S with additional bracing
Terrain flexibility ±230 mm between posts, additional flexibility up to ±500 mm with optional universal joint
Maintenance Maintenance-free motor and bearings
DIMENSIONS DURING TRANSPORT AND OPERATION
twitter.com/CepSolar
linkedin.com/company/cambridge-energy-partners
facebook.com/CEPSolar/
Future Business Centre,Kings Hedges Rd, Cambridge
CB4 2HY, UK
www.cambridge-ep.com
info@cambridge-ep.com
DATA SHEET | NOMAD TRACKER
Using our Nomad technology and unique expertise we partner with companies to evaluate and implement solar energy in a sustainable way. We guide customers through the process of implementing solar.
Nomad solar trackers combine the gains from tracking the sun with the flexibility of mobility to deliver the lowest levelized cost of energy where project installation costs are high, or project life is short.
© 2019 Cambridge Energy Partners Ltd. www.cambridge-ep.com
top related