multifunctional pdms tips fabricated by polymer casting of koh etched pyramidal p its

19-04-2023

Challenge the future

DelftUniversity ofTechnology

Multifunctional PDMS tips fabricated by polymer casting of KOH etched pyramidal pitsFirst Presentation; Project Defence

Kees Schilder

2Polymer Tip Arrays |

Introduction

• Polymer tip array• Increase of throughput• Challenge is inclination of tip

array• Advantage of PDMS

• Compliance• Stiffness

3Polymer Tip Arrays |

Applications

• Proteome analysis

• Cleaning

• Direct write lithography

F. Huo et al., Polymer Pen Lithography, Science (2008)

C. Wingren et al., Progress in miniaturization of protein arrays – a step closer to high-density nanoarrays, Drug

Discovery Today (2007)

4Polymer Tip Arrays |

Fabrication Process - Pits

5Polymer Tip Arrays |

Fabrication Process - Pits & Holes – 1.1Fabrication Process - Pits & Holes – 1.2

6Polymer Tip Arrays |

Fabrication Process - Pits & Holes – 2.1Fabrication Process - Pits & Holes – 2.2Fabrication Process - Pits & Holes – 2.3

7Polymer Tip Arrays |

Mask Design

• Simple design• Various configurations

8Polymer Tip Arrays |

Timeline - MilestonesWhat has been doneWhat has to be done

9Polymer Tip Arrays |

Expected Challenges

• Producing of (very) small tips due to the viscosity of PDMS

• PDMS to SiO2 bonding

10Polymer Tip Arrays |

Questions & Discussion