netvu console product training v2.0 us. netvu console remote netvu connected cctv console with...

NetVu Console Product Training

V2.0 US

NetVu ConsoleNetVu ConsoleRemote NetVu Connected CCTV Console with

traditional joystick control.

Key Benefits• Add remote control and additional viewing to an

existing standalone CCTV system with no need to retrain operators

• No need for a PC for remote viewing and control

Main Features• Joystick telemetry control over the network• Controls up to 99 cameras from up to 20 NetVu

Connected DVR or Servers• Works with a composite or VGA monitor (future) • (future) Simultaneous view of up to 16 cameras

from any mix of sites. Currently you can only select the first camera to start the 16 way view.

NetVu Console Features• IP to analogue conversion allows use of composite and VGA monitors• Simple network connection via Ethernet• NetVu Connected Technology allows integration with other NetVu

Connected products• Transparent Telemetry control through an associated DVR• 3-axis joystick allows an operator to easily control the pan, tilt and zoom

functionality with one simple movement

• Common set-up interface locally or over the network

• Easy configuration on local monitor using mouse control

NetVu Console Features• Playback from NetVu Connected DVRs• Event Search from NetVu Connected DVRs

• Control via IR Remote• Audio Listen and Challenge (future)• Softkeys provide simple user and programming interface• Supported protocols via associated DVR include; Dennard, JVC, Bosch,

BBV, Mark Mercer, Panasonic, American Dynamics, GE, Pelco, Samsung

Simplified Setup• On Screen Menus are the same as Webpages

Operating

NetVu Console

NetVu Console Keyboard

Playback

Control

Numeric

Keypad

MenuExit

(menus)

Help

Panic

Event

Goto

System Select

Live/Play

Menu

Cursor

Navigation

NetVu Console Softkeys

Navigation is via a color coded soft 5 key system.

The colored menu buttons provides an intuitive approach to operator and installer use.

The colored keys on the remote control correspond to the menu options displayed on screen.

Softkeys

Softkey Menus

Full Quad Multi Map Next

Next >> > << ||

Play Goto Event Setup Next

Preset ePTZ Aux Prog NextFor PTZ cameras only

Installing the

NetVu Console

NetVu Console Connections

VGA - SVGA 15 Way D Female monitor connectionMON - 75Ω BNC composite monitorKBD RJ12 Connector for NetVu Console KeyboardNET - RJ45 10/100BaseT Ethernet connectionIR- 3.5mm Jack Socket for IR Remote ExtenderAUD IN - RCA (phono) socket AUDIO OUT - RCA (phono) socketSERIAL - 9 way (male) for Serial MousePOWER - 12V DC 10 W Mains powered, separate power supplyLEDs PWR ON – Green STATUS - Green

NetVu Console Connections

Serial Port for Mouse (Optionally used in configuring NetVu Console and Debug)

IR Extender Port to allow use of Standard (SD type) IR Remote Control

VGA Connector (future)

Configuring the

NetVu Console

Setting the IP Address of the NetVu Console

• By default the unit is configured for DHCP where the unit is automatically allocated an IP address from the network DHCP server.

• As this IP address can change without notification (i.e. if there was a power failure), it is recommended that the NetVu Console is allocated a fixed IP address to remove the possibility of address change.

• If a permanent IP address is not assigned to the unit, it will attempt to contact the DHCP server every time it starts up. If for any reason, a DHCP server cannot allocate an IP address to the unit, the encoder will use a default IP address.

Webpage Configuration• The NetVu Console can be configured via a set of intuitive webpages or via

GUI menus on the Monitor.

• To access the web pages:– 1. Launch a web browser such as Internet Explorer or Mozilla Firefox

– 2. Type the IP address of the unit into the address bar.

– 3. The Network page will be displayed.

NetVu Console Webpages

The configuration pages are accessible using the links on the left hand side of the page.

NOTE: Any changes madeon the web pages are not (yet)automatically saved when the page is closed. Remember to press the Save button when making any changes.

Use the ‘Cancel’ button to revertTo the previous settings andThen navigate away.

General System SettingsThis page shows the generalinformation about the unit.

The serial port should be set for Mouse connection as this is useful to configure the product When using the on-screen menus.

The default image format can beset to JPEG or MPEG4 and imageresolution is selectable as High, Medium or Low as normal.

Can the settings be changed just like NVO from the keyboard or remote?

Network ConfigurationIP Address, Subnet, Gateway are the settings that haveAlready been configured usingthe Serial Port configuration.

DHCP addresses will be shownif the unit was installed on aDHCP network.

The unit should be restartedimplement the changes.

Configuring ServersTo set which servers can be connected to go to the Servers page as shown.

Enter the IP addresses of the NetVu Connected servers.

Upto 20 systems can be defined each with up to 99 cameras, across multiple servers

Configuration GUI Menus

The NetVu Console can be easily programmed using configuration menus on the monitor.

To enter the menus:-

Either :-

Press Next until Setup appears and then press it.

Or

Press the Menu button on the keyboard.

The Network page will then appear.

IP Address, Subnet, Gateway

settings can be programmed using the mouse.

Use the links to the left of the page to configure the General, Audio and Servers settings as per the webpages.

Press Exit to return to normal operation.

Simulator Webpage

• SD video is currently not showing up through network video.

• If connection to dvr is not available, the screen will not change

Future plans

• VGA output

• Audio

• Relays

• Alarms

• Copy images using a external flash drive

• ePTZ – used to do a Digital Zoom on a PTZ camera.

• Goto Timeline

• Events show the last 20 events for the DVR.