np79 install - indico-fnal (indico)interpration to bs 8888 welding symbols to bs 2553 tolerances...
Post on 27-Apr-2021
5 Views
Preview:
TRANSCRIPT
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 1 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
1TRUCK BASENP79-02-011
SCALE 1:20
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALLSHEET 2 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
1CENTRAL FRAMENP79-01-021
22M20 BOLT AND WASHERM20_SET2
1TRUCK BASENP79-02-013
3
1
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 3 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
1CENTRAL FRAMENP79-01-021
22M20 BOLT AND WASHERM20_SET2
1TRUCK BASENP79-02-013
1
3
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 4 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
22M20 BOLT AND WASHERM20_SET1
1CENTRAL FRAMENP79-01-022
1BOTTOM APANP79-01-973
1TRUCK BASENP79-02-014
4
2
3
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 5 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
2M16 BOLT AND WASHERM16_SET1
22M20 BOLT AND WASHERM20_SET2
1CENTRAL FRAMENP79-01-023
2TOP ATTACHMENT ASSEMBLYNP79-01-044
1BOTTOM APANP79-01-975
1TRUCK BASENP79-02-016 4
6
3
5
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A 16-Jan-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 6 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE 16-Jan-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
4M16 BOLT AND WASHERM16_SET1
22M20 BOLT AND WASHERM20_SET2
1CENTRAL FRAMENP79-01-023
4TOP ATTACHMENT ASSEMBLYNP79-01-044
1BOTTOM APANP79-01-975
1TOP APANP79-01-986
1TRUCK BASENP79-02-017
4
7
3
5
6
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 7 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
4M16 BOLT AND WASHERM16_SET1
22M20 BOLT AND WASHERM20_SET2
1CENTRAL FRAMENP79-01-023
4TOP ATTACHMENT ASSEMBLYNP79-01-044
1SIDE FRAMENP79-01-075
1BOTTOM APANP79-01-976
1TOP APANP79-01-987
1TRUCK BASENP79-02-018
3
4 5
6
7
8
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 8 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
4M16 BOLT AND WASHERM16_SET1
22M20 BOLT AND WASHERM20_SET2
1CENTRAL FRAMENP79-01-023
4TOP ATTACHMENT ASSEMBLYNP79-01-044
1SIDE FRAMENP79-01-075
1SIDE FRAMENP79-01-086
1BOTTOM APANP79-01-977
1TOP APANP79-01-988
1TRUCK BASENP79-02-019
3
4
5
6
7
8
9
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 9 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
QTYDWG TITLEPART/CAD NoITEM
24M12 BOLT AND WASHERM12_SET1
4M16 BOLT AND WASHERM16_SET2
22M20 BOLT AND WASHERM20_SET3
1CENTRAL FRAMENP79-01-024
4TOP ATTACHMENT ASSEMBLYNP79-01-045
1SIDE FRAMENP79-01-076
1SIDE FRAMENP79-01-087
1BOTTOM APANP79-01-978
1TOP APANP79-01-989
1TRUCK BASENP79-02-0110
4
5
6
7
8
9
10
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 10 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 11 OF 12 SCALE 1:20 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
THIRD ANGLE PROJECTION MODIFICATIONS
ISSUE DATE NAME DESCRIPTION
A Jan-17-20 G. STAVRAKIS FIRST ISSUE
DEPARTMENT OF PHYSICS
OLIVER LODGE BUILDING
PROJECT
DUNETITLE
TRANSPORT FRAMEDRAWING NUMBER ARRGR. DRAWING
NP79_INSTALL NP79
SHEET 12 OF 12 SCALE 1:25 A2
METRIC SCREW THREADS TO BS3643 CLASS 6H/6g
DRAWING PRACTICE AND TOLERANCEINTERPRATION TO BS 8888
WELDING SYMBOLS TO BS 2553
TOLERANCES UNLESS OTHERWISE SPECIFIED
MATERIAL DRAWN G. STAVRAKIS
MACHINED DIMS SPEC DATE Jan-17-20
ANGULAR TREATMENT CHECKED
DO NOT SCALE FINISH APPROVED
UNLESS OTHERWISE SPECIFIED:_ ALL DIMENSIONS IN MILLIMETERSSURFACE TEXTURE VALUES IN MICROMETERSSURFACE TEXT TO BE MACHINE ALL OVER OR WHERE MARKED
REMOVE BURRS AND BREAK SHARP EDGES
top related