orange hire - aehq6699-01, 924k, 930k, 938k …924k, 930k and 938k wheel loaders set a new standard...
Post on 10-Jul-2020
8 Views
Preview:
TRANSCRIPT
924K 930K 938K Wheel Loaders
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW (146 hp) 119 kW (160 hp) 129 kW (173 hp)
ISO 14396 (DIN) 109 kW (148 hp) 119 kW (162 hp) 129 kW (175 hp)
Bucket Capacity 19-50 m3 (25-65 yd3) 21-50 m3 (27-65 yd3) 25-50 m3 (33-65 yd3)
Full Turn Tip Load 7419 kg (16352 lb) 8369 kg (18444 lb) 9527 kg (20997 lb)
Operating Weight 12 868 kg (28360 lb) 13 829 kg (30479 lb) 15 928 kg (35104 lb)
Engine meets US EPA Tier 4 InterimEU Stage IIIB emission standards
2
Experience the Difference
Optimized Parallel Lift Z-bar Linkage Combines the digging effi ciency of a traditional Z-bar with tool carrier capabilities for superior performance and fl exibility
Cab and Controls Large spacious cab features excellent visibility to the front and rear extremely low sound levels and low-effort ergonomic joystick controls so you can concentrate on your work In cab adjustments are easy with intuitive controls and an easy to read optional display
Intelligent Power Management A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the fl exibility to effi ciently perform a multitude of tasks
Powerful Predictable Hydraulics The system senses demand and adjusts fl ow and pressure to match Working with buckets forks and other work tools has never been more effi cient
Work Tools A new line of optimized Performance Series buckets pallet and construction forks as well as a wide range of work tools are available in a Pin-on Fusiontrade coupler or ISO 23727 coupler interface
Serviceability Daily service points are easily accessible from ground level Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner
Contents Parallel Lift Loader Linkage 4
Industry Leading Operator Station 5
Power Train 6
Hydraulics 7
Work Tools 8
Options 9
Serviceability and Customer Support 10
Wheel Loader Specifications 11
Bucket Specifications 18
Operating Specifications 27
Supplemental Specifications 33
Standard Equipment 34
Optional Equipment35
3
The Catreg 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark
Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity
Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage combines
the digging efficiency of a traditional Z-bar with tool carrier
capabilities for great performance and versatility
bull Parallel lift and high tilt forces throughout the working
range help you safely and confidently handle loads
with precise control
bull Linkage features excellent visibility to the bucket cutting
edge and fork tips
bull High Lift versions are also available on all three models
4
Industry Leading Operator Station Superior visibility ergonomics and comfort
Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab
bull Extremely low sound levels
bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage
lines routing and work tool design
bull Automatic climate control
bull A heated and ventilated seat option is available for added comfort in a wide range of climates
bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral
Reverse switch differential lock trigger and optional third and fourth function auxiliary hydraulics
bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform
Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments
bull Machine information and diagnostics at a glance
bull Real time and historic fuel usage
bull Backup camera display
bull Help button plus 22 language capability
bull Adjustment of functions such as creep third function flow throttle and rimpull
Standard feature in Europe
5
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
2
Experience the Difference
Optimized Parallel Lift Z-bar Linkage Combines the digging effi ciency of a traditional Z-bar with tool carrier capabilities for superior performance and fl exibility
Cab and Controls Large spacious cab features excellent visibility to the front and rear extremely low sound levels and low-effort ergonomic joystick controls so you can concentrate on your work In cab adjustments are easy with intuitive controls and an easy to read optional display
Intelligent Power Management A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for fast digging cycles and the fl exibility to effi ciently perform a multitude of tasks
Powerful Predictable Hydraulics The system senses demand and adjusts fl ow and pressure to match Working with buckets forks and other work tools has never been more effi cient
Work Tools A new line of optimized Performance Series buckets pallet and construction forks as well as a wide range of work tools are available in a Pin-on Fusiontrade coupler or ISO 23727 coupler interface
Serviceability Daily service points are easily accessible from ground level Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner
Contents Parallel Lift Loader Linkage 4
Industry Leading Operator Station 5
Power Train 6
Hydraulics 7
Work Tools 8
Options 9
Serviceability and Customer Support 10
Wheel Loader Specifications 11
Bucket Specifications 18
Operating Specifications 27
Supplemental Specifications 33
Standard Equipment 34
Optional Equipment35
3
The Catreg 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark
Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity
Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage combines
the digging efficiency of a traditional Z-bar with tool carrier
capabilities for great performance and versatility
bull Parallel lift and high tilt forces throughout the working
range help you safely and confidently handle loads
with precise control
bull Linkage features excellent visibility to the bucket cutting
edge and fork tips
bull High Lift versions are also available on all three models
4
Industry Leading Operator Station Superior visibility ergonomics and comfort
Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab
bull Extremely low sound levels
bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage
lines routing and work tool design
bull Automatic climate control
bull A heated and ventilated seat option is available for added comfort in a wide range of climates
bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral
Reverse switch differential lock trigger and optional third and fourth function auxiliary hydraulics
bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform
Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments
bull Machine information and diagnostics at a glance
bull Real time and historic fuel usage
bull Backup camera display
bull Help button plus 22 language capability
bull Adjustment of functions such as creep third function flow throttle and rimpull
Standard feature in Europe
5
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
3
The Catreg 924K 930K and 938K Wheel Loaders set a new standard for productivity fuel efficiency and comfort Extremely low sound levels large spacious cab and intuitive controls keep you working comfortably all day long The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier Experience the new industry benchmark
Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity
Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage combines
the digging efficiency of a traditional Z-bar with tool carrier
capabilities for great performance and versatility
bull Parallel lift and high tilt forces throughout the working
range help you safely and confidently handle loads
with precise control
bull Linkage features excellent visibility to the bucket cutting
edge and fork tips
bull High Lift versions are also available on all three models
4
Industry Leading Operator Station Superior visibility ergonomics and comfort
Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab
bull Extremely low sound levels
bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage
lines routing and work tool design
bull Automatic climate control
bull A heated and ventilated seat option is available for added comfort in a wide range of climates
bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral
Reverse switch differential lock trigger and optional third and fourth function auxiliary hydraulics
bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform
Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments
bull Machine information and diagnostics at a glance
bull Real time and historic fuel usage
bull Backup camera display
bull Help button plus 22 language capability
bull Adjustment of functions such as creep third function flow throttle and rimpull
Standard feature in Europe
5
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity
Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage combines
the digging efficiency of a traditional Z-bar with tool carrier
capabilities for great performance and versatility
bull Parallel lift and high tilt forces throughout the working
range help you safely and confidently handle loads
with precise control
bull Linkage features excellent visibility to the bucket cutting
edge and fork tips
bull High Lift versions are also available on all three models
4
Industry Leading Operator Station Superior visibility ergonomics and comfort
Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab
bull Extremely low sound levels
bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage
lines routing and work tool design
bull Automatic climate control
bull A heated and ventilated seat option is available for added comfort in a wide range of climates
bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral
Reverse switch differential lock trigger and optional third and fourth function auxiliary hydraulics
bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform
Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments
bull Machine information and diagnostics at a glance
bull Real time and historic fuel usage
bull Backup camera display
bull Help button plus 22 language capability
bull Adjustment of functions such as creep third function flow throttle and rimpull
Standard feature in Europe
5
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Industry Leading Operator Station Superior visibility ergonomics and comfort
Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab
bull Extremely low sound levels
bull Superior visibility to the work tool due to wide curved windshield redesigned Z-bar linkage
lines routing and work tool design
bull Automatic climate control
bull A heated and ventilated seat option is available for added comfort in a wide range of climates
bull Seat-mounted ergonomic joystick for lift and tilt functions Joystick includes integrated ForwardNeutral
Reverse switch differential lock trigger and optional third and fourth function auxiliary hydraulics
bull Easy access to the cab with ergonomically placed grab rails walk-up steps and large platform
Easy to Use Instrument Panel and Display An optional secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments
bull Machine information and diagnostics at a glance
bull Real time and historic fuel usage
bull Backup camera display
bull Help button plus 22 language capability
bull Adjustment of functions such as creep third function flow throttle and rimpull
Standard feature in Europe
5
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Power Train Maximum machine power reduced fuel consumption
Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency
Engine The Catreg C66 ACERTtrade engine provides cleaner quieter operation while delivering superior performance and durability The engine
meets US EPA Tier 4 Interim and EU Stage IIIB emission requirements Maximum engine speed is now 1800 rpm for reduced fuel
consumption and lower sound levels The engine also features
bull Passive regeneration system ndash designed to manage itself so you donrsquot have to
bull Diesel particulate filter that is matched to the anticipated engine overhaul life
bull Class-leading fuel efficiency significantly reducing owning and operating costs
bull Configurable auto idle shut down feature as standard equipment
Transmission A smooth step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks
bull Four speed ranges ensure maximum controllability for any task
bull Rimpull control enables you to match available tractive power to underfoot conditions helping reduce tire wear
bull Creeper control lets you adjust machine groundspeed when using work tools such as brooms snow blowers and brushcutters
bull Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed
Axles and Brakes Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick Limited slip
differentials are optional on the rear Brake system includes independent service brakes on front and rear axles and a spring applied
electronically activated park brake
6
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Hydraulics Smooth efficient operation helps you get the job done faster
Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system The load-sensing variable flow system senses work demand and adjusts flow and pressure to match This allows full
hydraulic forces at any engine speed
bull Programmable in-cab kick-outs are easy to set on the go for tilt lower and lift This feature is ideal for applications where the
work cycle is repeatable
bull Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rackdump stops greatly improves operator
comfort and component life in addition to improved material retention
bull Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools
bull Optional Ride Control System provides an even smoother ride and excellent material retention
bull Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation
7
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Work Tools Do more jobs with one machine
The Right Tool for the Job An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site
Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machinersquos linkage weight lift and tilt capacities
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements The buckets feature a longer
floor open throat and curved side bars
Additional Buckets bull Light Material bull High Dump
bull Multi Purpose bull Wood Chip
bull Sand and Gravel
Material Handling Work Tools bull Pallet Forks bull Material Handling Arm
bull Construction Forks
Work Tools for Special Applications bull Dozer Blades bull Pipe and Pole Forks
bull Snow Plows bull Side Dump Buckets
bull Brooms bull Grapple Buckets
bull Rakes bull Grading Buckets
bull Log and Lumber Forks
Couplers The Cat Fusiontrade interface provides coupler flexibility without compromise
in breakout force and dump clearance The advanced wedging mechanism
creates a tight rattle-free fit eliminating play and wear for long service life
The open coupler frame design provides excellent line of sight to the work
tool An ISO 23727 coupler interface is also available for use with competitive
work tools
8
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Options Customize your machine to meet your needs
Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs See your Cat dealer for
more information about the features below and additional options
Coupler Options High Lift Linkage Counterweight Options HID Lights Turbine Precleaner
Rear Camera in Grill Front Light Guards Rear Light Guards Windshield Guard Flexporttrade Tires
3rd and 4th Function Hydraulics
Cold Start Package Blue Angel Certifi cation Electric Mirror Adjustment Heated Mirrors
Product Link
Additional options include bull Power Train Side Guards bull Lower Power Train Guard
bull Driveshaft Guard bull Crankcase Guard
bull Rear Waste Gate bull Full Coverage Fenders
bull RESPA Cab Filtration bull Optional Toolbox
Standard equipment in Europe
9
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Serviceability Easy service to keep your machine working
All service points are accessible from ground level Three large
service doors can be opened and closed in any order to give full
access to filters and service points Extended service intervals
reduce service time and maximize uptime Additional service
features include
bull Diesel particulate filter that is matched for anticipated
engine overhaul life Passive regeneration system requires
no operator interaction
bull Caterpillar exclusive electric fuel priming pump
bull Jump start studs as standard equipment
bull Single plane cooling system with 6 fins per inch coolers
as standard
bull Swing-up air conditioner condenser for easy clean out
bull Product Link ready (standard)
Customer Support Unmatched support makes the difference
Renowned Cat Dealer Support Your Cat dealer is ready to help you every step of the way From new
or used machine sales to rental or rebuild options your Cat dealer
can provide an optimal solution to your business needs Unsurpassed
worldwide parts availability trained technicians and customer
support agreements maximize your machine uptime
10
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Engine
924K 930K 938K Wheel Loader Specifications
924K 930K 938K
Engine Model Catreg C66 ACERTtrade Catreg C66 ACERTtrade Catreg C66 ACERTtrade
Maximum Gross Power
ISO 14396 109 kW 146 hp 119 kW 160 hp 129 kW 173 hp
ISO 14396 (DIN) 109 kW 148 hp 119 kW 162 hp 129 kW 175 hp
Rated Net Power 1800 rpm
SAE J1349 105 kW 141 hp 115 kW 154 hp 126 kW 169 hp
ISO 9249 (1977)EEC 801269 106 kW 142 hp 116 kW 156 hp 127 kW 170 hp
ISO 9249 (DIN) 106 kW 144 hp 116 kW 158 hp 127 kW 173 hp
Maximum Gross Torque
ISO 14396 725 Nmiddotm 534 lbf-ft 775 Nmiddotm 571 lbf-ft 825 Nmiddotm 608 lbf-ft
Maximum Net Torque
SAE J1349 699 Nmiddotm 515 lbf-ft 748 Nmiddotm 551 lbf-ft 802 Nmiddotm 591 lbf-ft
ISO 9249 (1977)EEC 801269 706 Nmiddotm 520 lbf-ft 756 Nmiddotm 557 lbf-ft 811 Nmiddotm 598 lbf-ft
Displacement 66 L 402 in3 66 L 402 in3 66 L 402 in3
Bore 105 mm 4 in 105 mm 4 in 105 mm 4 in
Stroke 127 mm 5 in 127 mm 5 in 127 mm 5 in
bull Net power ratings are tested at the reference conditions for the specifi ed standard bull Net power shown is the power available at the flywheel when the engine is equipped with alternator air cleaner diesel exhaust fi lter
and fan at minimum speed bull No derating required up to 3000 m (10000 ft) altitude Auto derate protects hydraulic and transmission systems bull Flywheel per the SAE reference conditions when the fan is at maximum speed bull Cat C66 engine meets US EPA Tier 4 Interim (EU Stage IIIB) emission requirements bull K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter
Engine Power and Torque
924K 930K 938K
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
600
500
400
300
800
700
600
500
400
800 1000 1200 1400 1600 1800 rpm
140
120
100
80
60
40
160
120
80
Power Torque
lbf-ft Nmiddotm kW hp
11
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K 930K 938K Wheel Loader Specifications
Buckets
bull Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention
924K 930K 938K
General Purpose 19-25 m3 25-33 yd3 21-27 m3 27-35 yd3 25-32 m3 33-42 yd3
Light Material 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3 35-50 m3 46-65 yd3
Weights
924K 930K 938K
Operating weight ndash Standard Lift 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Operating weight ndash High Lift 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
bull Specifications shown are for a machine configured with general purpose Fusion bucket bolt-on cutting edges counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires ndash 924K is configured with a 19 m3 (25 yd3) Fusion bucket with bolt-on cutting edge ndash 930K is configured with a 21 m3 (27 yd3) Fusion bucket with bolt-on cutting edge ndash 938K is configured with a 25 m3 (33 yd3) Fusion bucket with bolt-on cutting edge
Steering
bull Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders
924K 930K 938K
Steering articulation angle each direction 40deg 40deg 40deg
Steering cylinder double acting
Bore diameter 70 mm 28 in 70 mm 28 in 80 mm 31 in
Rod diameter 40 mm 16 in 40 mm 16 in 50 mm 2 in
Stroke 438 mm 172 in 438 mm 172 in 399 mm 157 in
Maximum flow ndash steering pump 130 Lmin 34 galmin 130 Lmin 34 galmin 130 Lmin 34 galmin
Maximum working pressure ndash steering pump 24 130 kPa 3500 psi 24 130 kPa 3500 psi 24 130 kPa 3500 psi
Maximum steering torque
0deg (straight machine) 50 375 Nmiddotm 37155 lbf-ft 50 375 Nmiddotm 37155 lbf-ft 57 630 Nmiddotm 42506 lbf-ft
40deg (full turn) 37 620 Nmiddotm 27747 lbf-ft 37 620 Nmiddotm 27747 lbf-ft 42 570 Nmiddotm 31398 lbf-ft
Steering cycle times (full left to full right)
800 rpm pump flow limited 28 seconds 28 seconds 31 seconds
1800 rpm 90 rpm steering wheel speed 24 seconds 24 seconds 23 seconds
Number of steering wheel turns
Full left to full right or full right to full left 35 turns 35 turns 33 turns
12
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Loader Hydraulic System
bull Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder
bull 3rd function flow is fully adjustable from 20 to 100 of maximum flow through the secondary display when equipped
bull 4th function flow is fi xed
924K 930K 938K
Maximum flow ndash implement pump 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
3rd function maximum flow 150 Lmin 40 galmin 190 Lmin 50 galmin 190 Lmin 50 galmin
4th function maximum flow 75 Lmin 20 galmin 75 Lmin 20 galmin 75 Lmin 20 galmin
Maximum working pressure ndash 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi implement pump
Relief pressure ndash tilt cylinder 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
3rd function maximum working pressure
3rd function relief pressure
26 000 kPa
28 000 kPa
3771 psi
4061 psi
25 000 kPa
28 000 kPa
3626 psi
4061 psi
28 000 kPa
30 000 kPa
4061 psi
4351 psi
4th function maximum working pressure 26 000 kPa 3771 psi 25 000 kPa 3626 psi 28 000 kPa 4061 psi
4th function relief pressure 28 000 kPa 4061 psi 28 000 kPa 4061 psi 30 000 kPa 4351 psi
Lift cylinder double acting
Bore diameter 110 mm 43 in 120 mm 47 in 120 mm 47 in
Rod diameter 60 mm 24 in 65 mm 26 in 65 mm 26 in
Stroke 728 mm 287 in 728 mm 287 in 789 mm 311 in
Tilt cylinder double acting
Bore diameter 130 mm 51 in 150 mm 59 in 150 mm 59 in
Rod diameter 70 mm 28 in 90 mm 35 in 90 mm 35 in
Stroke 555 mm 219 in 555 mm 219 in 555 mm 219 in
Hydraulic cycle times (1800 rpm)
Raise (ground level to maximum lift) 55 seconds 51 seconds 55 seconds
Dump (at maximum lift height) 15 seconds 15 seconds 15 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Total cycle time 96 seconds 93 seconds 97 seconds
Hydraulic cycle times (1000 rpm)
Raise (ground level to maximum lift) 96 seconds 91 seconds 98 seconds
Dump (at maximum lift height) 30 seconds 26 seconds 26 seconds
Float down (maximum lift to ground level) 26 seconds 27 seconds 27 seconds
Service Refi ll Capacities
924K 930K 938K
Fuel tank 195 L 515 gal 195 L 515 gal 195 L 515 gal
Cooling system 30 L 79 gal 30 L 79 gal 32 L 85 gal
Engine crankcase 20 L 53 gal 20 L 53 gal 20 L 53 gal
Transmission (gear box) 85 L 22 gal 85 L 22 gal 11 L 29 gal
Axles
Front 21 L 55 gal 26 L 69 gal 35 L 92 gal
Rear 21 L 55 gal 25 L 66 gal 35 L 92 gal
Hydraulic system (including tank) 160 L 423 gal 165 L 436 gal 170 L 449 gal
Hydraulic tank 90 L 238 gal 90 L 238 gal 90 L 238 gal
13
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K 930K 938K Wheel Loader Specifications
Transmission
Creeper control allows maximum speed range adjustability from 1 kmh (06 mph) to 13 kmh (8 mph) in Range 1 through the secondary display when equipped Factory default is 7 kmh (44 mph)
924K 930K 938K
Forward
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Reverse
Range 1 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph 1-13 kmh 06-80 mph
Range 2 13 kmh 8 mph 13 kmh 8 mph 13 kmh 8 mph
Range 3 27 kmh 17 mph 27 kmh 17 mph 27 kmh 17 mph
Range 4 40 kmh 25 mph 40 kmh 25 mph 40 kmh 25 mph
Power Train
bull Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and effi ciency
Differential front locking axle can be engaged on the go at full torque up to 10 kmh (62 mph) on the 924K930K and up to 20 kmh (124 mph) on the 938K
924K 930K 938K
Front axle Fixed Fixed Fixed
Traction aid Locking differential Locking differential Locking differential standard standard standard
Rear axle Oscillating Oscillating Oscillating
Oscillation with 175 tires plusmn 13 degrees ndash ndash
Oscillation with 205 tires plusmn 11 degrees plusmn 11 degrees plusmn 11 degrees
Traction aid Limited slip differential Limited slip differential Limited slip differential optional optional optional
Brakes
Service brakes Inboard wet disc Inboard wet disc Outboard wet disc
Park brake Spring applied Spring applied Spring applied hydraulically released hydraulically released hydraulically released
14
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Tires
924K 930K 938K
175 R25 radial (L-2) Yes
175 R25 radial (L-3) Yes
175 R25 radial (L-5) Yes
205-25 12PR (L-2) Yes Yes Yes
205-25 12PR (L-3) Yes Yes Yes
205-25 16PR (L-5) Yes Yes Yes
205 R25 radial (L-2) Yes Yes Yes
205 R25 radial (L-3) Yes Yes Yes
205 R25 radial (L-5) Yes Yes Yes
55065 R25 radial (L-3) Yes
60065 R25 radial (L-3) Yes
65065 R25 radial (L-3) Yes
SkidderAgriculture Yes Yes Yes
Flexports Gen II Yes Yes Yes
Standard tire bull Other tire choices available contact your Cat dealer for details Not all tires are available in all regions bull In certain applications the loaderrsquos productive capabilities may exceed the tiresrsquo tonnes-kmh (ton-mph) capabilities bull Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model
Cab
bull ROPS SAE J1040 MAY94 ISO 3471-1994 bull FOPS SAE JISO 3449 APR98 Level II ISO 3449 1992 Level II bull Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe bull The declared dynamic operator sound pressure levels per ISO 63962008
when properly installed and maintained are ndash Standard cab 68 plusmn3 dB(A) ndash Deluxe cab 66 plusmn2 dB(A)
The measurements were conducted with the cab doors and windows closed and at 70 of the maximum engine cooling fan speed The sound level may vary at different engine cooling fan speeds
Operating Specifi cations
924K 930K 938K
Tipping load ndash straight (ISO 14397-1) 8644 kg 19051 lb 9803 kg 21605 lb 11 209 kg 24704 lb
Tipping load ndash full turn (ISO 14397-1) 7419 kg 16352 lb 8369 kg 18444 lb 9527 kg 20997 lb
Clearance full lift and 45deg dump 2885 mm 95 2828 mm 93 2834 mm 93
Reach full lift and 45deg dump 1024 mm 34 1064 mm 35 1146 mm 39
Steering articulation angle each direction 40deg 40deg 40deg
15
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K 930K 938K Wheel Loader Specifications
Dimensions with Bucket All dimensions are approximate Dimensions will vary with bucket and tire choice Refer to Operating Specifications with Buckets
2
1
6
8
16
9 11
12 13
10 14
7
5
23
24
25
15 4 26 3
19
21
22
20
18
27
17
Standard Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 7451 mm 245 7530 mm 248 7656 mm 251
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 2885 mm 95 2828 mm 93 2834 mm 93
10 Clearance load over height 3330 mm 1011 3331 mm 1011 3354 mm 110
11 Clearance level bucket 3580 mm 118 3580 mm 118 3641 mm 1111
12 Height bucket pin 3907 mm 129 3907 mm 129 3969 mm 130
13 Height overall 5076 mm 167 5147 mm 1610 5273 mm 173
14 Reach bucket at 45deg 1024 mm 34 1064 mm 35 1146 mm 39
15 Carry height bucket pin 458 mm 16 458 mm 16 467 mm 16
16 Dig depth 100 mm 39 100 mm 39 101 mm 39
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 5924 mm 195 5945 mm 196 6133 mm 201
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 54deg 54deg 54deg
24 Dump angle at full lift 50deg 49deg 49deg
25 Rack angle at carry 45deg 45deg 45deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 12 868 kg 28360 lb 13 829 kg 30479 lb 15 928 kg 35104 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
16
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Dimensions with Bucket
High Lift
924K 930K 938K
1 Height ground to cab 3340 mm 1011 3340 mm 1011 3340 mm 1011
2 Height ground to beacon 3669 mm 120 3669 mm 120 3669 mm 120
3 Height ground axle center 685 mm 22 685 mm 22 685 mm 22
4 Height ground clearance 400 mm 13 400 mm 13 390 mm 13
5 Length overall 8093 mm 266 8324 mm 273 8397 mm 276
6 Length rear axle to bumper 1986 mm 66 1993 mm 66 1968 mm 65
7 Length hitch to front axle 1500 mm 411 1500 mm 411 1525 mm 50
8 Length wheel base 3000 mm 910 3000 mm 910 3050 mm 100
9 Clearance bucket at 45deg 3378 mm 110 3421 mm 112 3415 mm 112
10 Clearance load over height 3550 mm 117 3540 mm 117 3561 mm 118
11 Clearance level bucket 4073 mm 134 4173 mm 138 4222 mm 1310
12 Height bucket pin 4400 mm 145 4500 mm 149 4550 mm 1411
13 Height overall 5569 mm 183 5740 mm 189 5853 mm 192
14 Reach bucket at 45deg 1261 mm 41 1385 mm 46 1413 mm 47
15 Carry height bucket pin 649 mm 21 692 mm 23 686 mm 22
16 Dig depth 135 mm 53 135 mm 53 135 mm 53
17 Width bucket 2550 mm 84 2550 mm 84 2750 mm 90
18 Width tread center 1930 mm 63 1930 mm 63 2065 mm 69
19 Turning radius over bucket 6234 mm 205 6329 mm 209 6490 mm 213
20 Width over tires 2540 mm 84 2540 mm 84 2675 mm 89
21 Turning radius outside of tires 5402 mm 178 5402 mm 178 5537 mm 181
22 Turning radius inside of tires 2851 mm 94 2851 mm 94 2852 mm 94
23 Rack angle at full lift 51deg 53deg 53deg
24 Dump angle at full lift 49deg 48deg 47deg
25 Rack angle at carry 49deg 50deg 50deg
26 Departure angle 33deg 33deg 33deg
27 Articulation angle 40deg 40deg 40deg
Operating weight 13 166 kg 29018 lb 14 077 kg 31024 lb 16 177 kg 35653 lb
Vary with bucket Vary with tire Dimensions listed are for a machine configured with general purpose Fusion bucket bolt-on cutting edge counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
Supplemental Operating Data ndash Tires
924K 930K 938K
55065 R25 175 R25 (L-2) 60065 R25 205R25 (L-5) 65065 R25 Flexport (Gen II)
mm in mm in mm in mm in mm in mm in
Vertical heights ndash70 ndash28 ndash99 ndash39 ndash55 ndash22 +15 +06 ndash35 ndash14 +59 +23
Reach bucket at 45deg +43 +17 +75 +3 +29 +11 ndash21 ndash08 ndash5 ndash02 ndash23 ndash09
Width over tires +21 +08 ndash69 ndash27 +98 +39 0 0 +121 +48 +65 +26
Turning radius outside of tires +4 +02 ndash45 ndash18 +42 +17 +1 0 +53 +21 +61 +24
Turning radius inside of tires ndash11 ndash04 35 +14 ndash49 ndash19 0 0 ndash61 ndash24 ndash33 ndash13
kg lb kg lb kg lb kg lb kg lb kg lb
Tipping load ndash straight ndash83 ndash182 ndash348 ndash767 +9 +19 +444 +978 +137 +301 +1864 +4108
Tipping load ndash full turn ndash72 ndash157 ndash301 ndash663 +8 +17 +384 +846 +118 +260 +1612 +3552
Operating weight ndash126 ndash277 ndash530 ndash1167 +14 +30 +678 +1494 +210 +462 +2866 +6316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
19 25
17 22
2550 84
1952 3270
2885 95
1024 34
1566 51
2320 77
100 39
7451 245
5076 167
5924 195
8644 19051
9004 19845
7419 16352
7893 17396
10 223 22531
12 868 28360
Pin On Fusion
Rated capacity m3 21 23 21 23 yd3 27 30 27 30
19 25
17 22
2550 84
2048 3430
2912 96
992 33
1547 50
2278 75
100 39
7409 243
5052 166
5912 194
9029 19899
9405 20728
7783 17152
8279 18247
10 685 23550
12 527 27608
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
19 21 25 27
2550 2550 84 84
1834 1658 3144 2801
2855 2807 94 92
1033 1070 34 36
1560 1573 51 51
2350 2413 78 711
100 100 39 39
7481 7544 246 249
5122 5180 169 1611
5933 5951 195 196
8942 8860 19708 19527
9315 9229 20530 20340
7702 7626 16975 16808
8194 8113 18059 17881
9956 9388 21943 20691
12 571 12 609 27706 27790
19 21 25 27
2550 2550 84 84
1748 1580 2996 2670
2828 2779 93 91
1064 1102 35 37
1578 1590 52 52
2392 2455 710 80
100 100 39 39
7523 7586 248 2410
5147 5205 1610 170
5945 5964 196 196
8560 8480 18865 18690
8916 8833 19651 19468
7341 7268 16180 16018
7810 7732 17212 17040
9547 9019 21041 19876
12 912 12 950 28458 28541
ISO 23727
21 23 27 30
20 22 26 29
2550 2550 84 84
1682 1520 2882 2568
2747 2698 90 810
1168 1205 39 311
1639 1648 54 54
2523 2586 83 85
93 93 37 37
7648 7711 251 253
5236 5294 172 174
5964 5984 196 197
8235 8157 18150 17978
8578 8497 18906 18727
7062 6990 15565 15406
7513 7437 16559 16390
8451 8020 18625 17675
12 859 12 897 28342 28426
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
18
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K Operating Specifications with Buckets
High Lift
50 ndash 65 ndash
48 ndash 63 ndash
2750 ndash 90 ndash
658 ndash 1115 ndash
2479 +493 81 +17
1286 +237 42 +9
1588 +572 52 +110
2815 +523 92 +18
100 +35 39 +14
7946 +642 260 +21
5752 +493 1810 +17
6166 +311 202 +10
7745 ndash2145 17070 ndash4726
8068 ndash2234 17781 ndash4923
6577 ndash1892 14496 ndash4170
6997 ndash2013 15421 ndash4436
6611 ndash494 14571 ndash1089
13 480 +299 29709 +659
Pin On
Light Material
35 42 50 46 55 65
33 40 48 43 52 63
2750 2750 2750 90 90 90
1030 829 693 1727 1395 1174
2629 2509 2509 87 82 82
1137 1257 1257 38 41 41
1538 1579 1579 50 52 52
2603 2773 2773 86 91 91
100 100 100 39 39 39
7734 7904 7904 254 2511 2511
5284 5445 5725 174 1710 189
6099 6152 6152 200 202 202
8418 8149 8116 18553 17959 17887
8769 8488 8454 19326 18708 18632
7210 6962 6927 15890 15343 15267
7670 7406 7369 16905 16322 16242
7888 6893 6842 17385 15192 15080
12 925 13 062 13 132 28487 28789 28943
Fusion
Rated capacity m3 35 42 yd3 46 55
Struck capacity m3 33 40 yd3 43 52
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 979 787 lbyd3 1642 1324
Clearance full lift 45deg dump mm 2600 2479 ftin 86 81
Reach full lift 45deg dump mm 1166 1286 ftin 39 42
Reach 2130 mm (70) clearance 45deg dump mm 1549 1588 ftin 50 52
Reach level arm level bucket mm 2645 2815 ftin 88 92
Dig depth mm 100 100 in 39 39
Length overall mm 7776 7946 ftin 256 260
Height overall mm 5309 5471 ftin 175 1711
Turning radius bucket at carry mm 6112 6166 ftin 200 202
Tipping load ndash straight ISO 14397-1 kg 8040 7776 lb 17720 17138
Tipping load ndash straight rigid tire kg 8375 8100 lb 18459 17852
Tipping load ndash full turn ISO 14397-1 kg 6853 6609 lb 15104 14567
Tipping load ndash full turn rigid tire kg 7291 7031 lb 16068 15497
Breakout force kg 7603 6660 lb 16757 14678
Operating weight kg 13 275 13 415 lb 29258 29566
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 924K configured with bucket bolt-on cutting edge standard counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
19
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Bucket Specifications
924K Bucket Selection Table
1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125 High Lift
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
kgm3 lbyd3
112 108 104 100 96 ndash501 ndash845 115 109 105 100 97 ndash451 ndash759
114 109 104 99 95 ndash408 ndash688 112 107 103 99 95 ndash494 ndash833
115 109 104 100 96 ndash444 ndash748 115 109 104 99 94 ndash403 ndash679
kgm3
Bucket Fill Factor lbyd3
m3 yd3
19 25
Pin On 21 27
Gen
eral
Pur
pose 23 30
19 25
Fusion 21 27 23 30
1100 1854
600 650 700 750 800 850 900 950 1000 1011 1095 1180 1264 1348 1432 1517 1601 1685
114 108 103 111 104 98
107 99 109 103 98
112 105 98 110 101
kgm3 1050Bucket Fill Factor High Lift
lbyd3 1769
m3 yd3 kgm3 lbyd3
9835 46
Pin On 42 55 ndash262 ndash442 ndash214 ndash360 ndash181 ndash305 ndash259 ndash436 ndash211 ndash356 ndash178 ndash301
Ligh
tM
ater
ial
50 65 35 46
Fusion 42 55 50 65
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
924K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
924K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +12 mm +05 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash103 mm ndash41 in ndash82 mm ndash32 in
Reach +104 mm +41 in +89 mm +35 in
Tipping load ndash straight ndash148 kg ndash325 lb ndash142 kg ndash311 lb
Tipping load ndash full turn ndash145 kg ndash318 lb ndash139 kg ndash305 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
20
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
930K Operating Specifications with Buckets
General Purpose
21 27
19 25
2550 84
1993 3416
2828 93
1064 35
1578 52
2392 710
100 39
7530 248
5147 1610
5945 196
9803 21605
10 212 22506
8369 18444
8903 19621
12 366 27254
13 829 30479
Pin On Fusion
Rated capacity m3 23 25 23 25 yd3 30 33 30 33
21 27
19 25
2550 84
2082 3568
2855 94
1033 34
1560 51
2350 78
100 39
7488 246
5122 169
5933 195
10 202 22484
10 627 23421
8743 19269
9301 20499
12 881 28388
13 488 29727
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
21 23 27 30
2550 2550 84 84
1883 1706 3182 2849
2807 2761 92 90
1070 1109 36 37
1573 1587 51 52
2413 2475 711 81
100 100 39 39
7551 7613 249 2411
5180 5239 1611 172
5951 5970 196 197
10 114 9976 22290 21986
10 535 10 391 23219 22902
8662 8532 19091 18805
9215 9077 20310 20005
12 158 11 488 26796 25318
13 526 13 625 29811 30029
21 23 27 30
2550 2550 84 84
1802 1631 3045 2722
2779 2733 91 811
1102 1140 37 38
1590 1603 52 53
2455 2517 80 83
100 100 39 39
7593 7655 2410 251
5205 5264 170 173
5964 5983 196 197
9718 9571 21418 21095
10 123 9970 22310 21974
8291 8153 18272 17968
8820 8673 19438 19115
11 693 11 063 25772 24382
13 867 13 978 30562 30808
ISO 23727
23 25 30 33
22 24 29 31
2550 2750 84 90
1734 1576 2929 2632
2698 2698 810 810
1205 1205 311 311
1648 1648 54 54
2586 2586 85 85
93 93 37 37
7718 7718 253 253
5294 5294 174 174
5984 6075 197 1911
9349 9252 20604 20391
9738 9637 21463 21240
7975 7881 17576 17368
8484 8384 18698 18477
10 432 10 375 22991 22867
13 815 13 918 30447 30674
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
35 42 50 35 46 55 65 46
33 40 48 33 43 52 63 43
2750 2750 2750 2750 90 90 90 90
1176 948 793 1123 1972 1596 1345 1883
2629 2509 2509 2600 87 82 82 86
1137 1257 1257 1166 38 41 41 39
1538 1579 1579 1549 50 52 52 50
2603 2773 2773 2645 86 91 91 88
100 100 100 100 39 39 39 39
7741 7911 7911 7783 254 2511 2511 256
5284 5445 5725 5309 174 1710 189 175
6099 6152 6152 6112 200 202 202 200
9652 9365 9334 9259 21273 20640 20572 20406
10 054 9755 9723 9645 22159 21500 21429 21256
8230 7966 7934 7860 18138 17557 17486 17323
8755 8475 8440 8362 19296 18678 18602 18429
10 277 9020 8969 9921 22649 19879 19767 21864
13 842 13 979 14 049 14 192 30508 30810 30965 31280
Fusion
Rated capacity m3 42 50 yd3 55 65
Struck capacity m3 40 48 yd3 52 63
Width bucket mm 2750 2750 ftin 90 90
Nominal material density 100 fill factor kgm3 905 757 lbyd3 1523 1284
Clearance full lift 45deg dump mm 2479 2479 ftin 81 81
Reach full lift 45deg dump mm 1286 1286 ftin 42 42
Reach 2130 mm (70) clearance 45deg dump mm 1588 1588 ftin 52 52
Reach level arm level bucket mm 2815 2815 ftin 92 92
Dig depth mm 100 100 in 39 39
Length overall mm 7953 7953 ftin 261 261
Height overall mm 5471 5752 ftin 1711 1810
Turning radius bucket at carry mm 6166 6166 ftin 202 202
Tipping load ndash straight ISO 14397-1 kg 8977 8948 lb 19785 19722
Tipping load ndash straight rigid tire kg 9351 9321 lb 20609 20543
Tipping load ndash full turn ISO 14397-1 kg 7602 7571 lb 16754 16687
Tipping load ndash full turn rigid tire kg 8087 8055 lb 17823 17752
Breakout force kg 8730 8682 lb 19240 19134
Operating weight kg 14 332 14 397 lb 31587 31731
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 930K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 414 bar (60 psi) in the front tires and 276 bar (40 psi) in the rear tires
High Lift
ndash ndash
ndash ndash
ndash ndash
ndash ndash
+593 +111
+320 +10
+717 +24
+653 +21
+35 +14
+794 +27
+593 +111
+384 +13
ndash2795 ndash6160
ndash2912 ndash6417
ndash2452 ndash5404
ndash2609 ndash5749
ndash299 ndash658
+247 +544
22
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
930K Bucket Selection Table
Bucket kgm3 22001375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
114 110 105 102 98 112 108 103 99 95
112 107 102 98 114 109 105 101 97
113 108 103 99 95 112 107 102 97
High LiftFill Factor lbyd3 3707
21 27 ndash588 ndash992
Pin On 23 30 ndash533 ndash898 25 33 ndash487 ndash821 21 27 ndash580 ndash977
Fusion 23 30 ndash525 ndash885 25 33 ndash480 ndash809
700 750 800 850 900 950 1000 1050 1100 1150 1180 1264 1348 1432 1517 1601 1685 1769 1854 1938
m3 yd3 kgm3 lbyd3
Ligh
t Mat
eria
l
112 107 102 98 94
113 106 99 112 107 102 98
113 106 101 95 108 101 95
112 105 100 95
Bucket kgm3 1200 1250 High Lift
Fill Factor lbyd3 2022 2106
35 46 ndash341 ndash575
Pin On 42 55 ndash278 ndash468 50 65 ndash234 ndash395 35 46 ndash337 ndash568
Fusion 42 55 ndash274 ndash462 50 65 ndash231 ndash389
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
930K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
930K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash104 mm ndash41 in ndash83 mm ndash33 in
Reach +103 mm +41 in +88 mm +35 in
Tipping load ndash straight ndash150 kg ndash329 lb ndash143 kg ndash315 lb
Tipping load ndash full turn ndash146 kg ndash322 lb ndash140 kg ndash309 lb
Breakout force ndash121 kg ndash266 lb ndash115 kg ndash254 lb
Operating weight +120 kg +264 lb +116 kg +255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Bucket Specifications
938K Operating Specifications with Buckets
Rated capacity m3
yd3
Struck capacity m3
yd3
Width bucket mm ftin
Nominal material density 100 fill factor kgm3
lbyd3
Clearance full lift 45deg dump mm ftin
Reach full lift 45deg dump mm ftin
Reach 2130 mm (70) clearance 45deg dump mm ftin
Reach level arm level bucket mm ftin
Dig depth mm in
Length overall mm ftin
Height overall mm ftin
Turning radius bucket at carry mm ftin
Tipping load ndash straight ISO 14397-1 kg lb
Tipping load ndash straight rigid tire kg lb
Tipping load ndash full turn ISO 14397-1 kg lb
Tipping load ndash full turn rigid tire kg lb
Breakout force kg lb
Operating weight kg lb
25 33
23 30
2750 90
1998 3337
2869 94
1108 37
1637 54
2452 80
100 39
7604 2411
5242 172
6117 200
11 707 25801
12 194 26876
9991 22021
10 629 23426
13 813 30442
15 523 34212
General Purpose
Pin On
25 33
23 30
2750 90
1905 3181
2834 93
1146 39
1658 55
2504 82
101 4
7656 251
5273 173
6133 201
11 209 24704
11 676 25734
9527 20997
10 135 22337
13 170 29027
15 928 35104
Fusion
27 29 35 38
25 27 33 35
2750 2750 90 90
1834 1694 3118 2850
2822 2786 93 91
1146 1178 39 310
1652 1664 55 55
2514 2563 82 84
100 100 39 39
7666 7715 251 253
5301 5348 174 176
6136 6150 201 202
11 610 11 529 25588 25408
12 094 12 009 26654 26467
9903 9828 21825 21661
10 535 10 455 23218 23043
13 082 12 552 28833 27665
15 568 15 604 34311 34392
27 29 35 38
25 27 33 35
2750 2750 90 90
1748 1615 2972 2716
2787 2751 91 90
1185 1216 310 311
1672 1684 55 56
2566 2615 85 86
101 101 4 4
7718 7767 253 255
5332 5379 175 177
6152 6166 202 202
11 113 11 035 24493 24320
11 576 11 494 25514 25333
9439 9367 20803 20645
10 042 9965 22131 21963
12 498 12 009 27546 26467
15 972 16 008 35202 35281
ISO 23727
27 29 35 38
26 27 34 35
2750 2750 90 90
1696 1567 2883 2636
2712 2675 810 89
1280 1311 42 43
1726 1735 57 58
2687 2736 89 811
93 93 37 37
7833 7882 258 2510
5415 5462 179 1711
6169 6185 202 203
10 775 10 702 23748 23587
11 224 11 148 24737 24570
9156 9089 20180 20033
9741 9670 21468 21311
11 299 10 887 24902 23993
15 858 15 892 34950 35025
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
24
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
938K Operating Specifications with Buckets
Light Material
High LiftPin On Fusion
Rated capacity m3 35 42 50 35 42 50 ndash yd3 46 55 65 46 55 65 ndash
Struck capacity m3 33 40 48 33 40 48 ndash yd3 43 52 63 43 52 63 ndash
Width bucket mm 2750 2750 2750 2750 2750 2750 ndash ftin 90 90 90 90 90 90 ndash
Nominal material density 100 fill factor kgm3 1378 1114 934 1313 1062 890 ndash lbyd3 2311 1875 1583 2202 1787 1508 ndash
Clearance full lift 45deg dump mm 2691 2571 2571 2654 2534 2534 +581 ftin 89 85 85 88 83 83 +110
Reach full lift 45deg dump mm 1174 1294 1294 1210 1331 1331 +267 ftin 310 42 42 311 44 44 +11
Reach 2130 mm (70) clearance 45deg dump mm 1608 1654 1654 1622 1666 1666 +666 ftin 53 55 55 53 55 55 +22
Reach level arm level bucket mm 2642 2812 2812 2694 2864 2864 +607 ftin 88 92 92 810 94 94 +111
Dig depth mm 100 100 100 101 101 101 +35 in 39 39 39 4 4 4 +14
Length overall mm 7794 7964 7964 7846 8016 8016 +740 ftin 256 261 261 258 263 263 +25
Height overall mm 5346 5507 5786 5376 5539 5820 +581 ftin 176 180 1811 177 182 191 +110
Turning radius bucket at carry mm 6174 6227 6227 6190 6244 6244 +357 ftin 203 205 205 203 205 205 +12
Tipping load ndash straight ISO 14397-1 kg 11 332 11 018 11 001 10 847 10 549 10 526 ndash3003 lb 24975 24282 24247 23907 23249 23198 ndash6618
Tipping load ndash straight rigid tire kg 11 804 11 477 11 460 11 299 10 988 10 964 ndash3128 lb 26016 25294 25257 24903 24217 24164 ndash6893
Tipping load ndash full turn ISO 14397-1 kg 9646 9359 9340 9194 8921 8895 ndash2625 lb 21259 20626 20584 20262 19662 19605 ndash5785
Tipping load ndash full turn rigid tire kg 10 262 9956 9936 9780 9491 9463 ndash2793 lb 22616 21943 21898 21556 20917 20856 ndash6154
Breakout force kg 11 750 10 331 10 281 11 263 9936 9888 ndash502 lb 25897 22768 22659 24822 21899 21792 ndash1106
Operating weight kg 15 730 15 869 15 937 16 131 16 270 16 335 +249 lb 34668 34975 35124 35551 35859 36002 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a 938K configured with bucket bolt-on cutting edge heavy counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires at a pressure of 448 bar (65 psi) in the front tires and 276 bar (40 psi) in the rear tires
25
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Bucket Specifications
938K Bucket Selection Table
Bucket Fill Factor kgm3 1375 1450 1525 1600 1675 1750 1825 1900 1975 2050 2125
High Liftlbyd3 2317 2443 2570 2696 2822 2949 3075 3202 3328 3454 3581
m3 yd3 kgm3 lbyd3
Gen
eral
Pur
pose
Pin On
25 33 114 109 105 101 97 94 ndash529 ndash891 27 35 115 109 105 100 97 ndash486 ndash819 29 38 111 106 101 97 ndash450 ndash758
Fusion
25 33 114 109 104 100 96 ndash519 ndash874 27 35 115 109 104 100 96 ndash477 ndash804 29 38 111 106 101 96 ndash441 ndash744
m3 yd3
111
1250 2106
110
105
111 106 110 104
114 112 106
105
kgm3 lbyd3
800 1348
102
kgm3 850 900 950 1000 1050 1100 1150 1350 1450Bucket Fill Factor High Lift
lbyd3 1432 1517 1601 1685 1769 1854 1938 2275 2443
9535 46 ndash369 ndash621
Ligh
t Mat
eria
l
101 97Pin On 42 55 ndash300 ndash506 9850 65 ndash254 ndash427
9735 46 ndash362 ndash610 101 97Fusion 42 55 ndash295 ndash497
9950 65 ndash249 ndash420
Material density and fill factor are key variables when choosing the appropriate size of the bucket The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100 ISO rated Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing
938K Fill Factors
Materials Density Fill
Earth and rock ~ 1800 kgm3 ~ 3033 lbyd3 ~ 115
Sand and gravel ~ 1700 kgm3 ~ 2865 lbyd3 ~ 110
Aggregates ~ 1600 kgm3 ~ 2696 lbyd3 ~ 105
Bulk grains ~ 750 kgm3 ~ 1264 lbyd3 ~ 100
Woodchips ~ 500 kgm3 ~ 843 lbyd3 ~ 100
938K Ground Engagement Options
Long Teeth and Segments Short Teeth and Segments
Dig depth +11 mm +04 in +5 mm +02 in
Length overall +146 mm +57 in +121 mm +48 in
Dump clearance ndash105 mm ndash41 in ndash84 mm ndash33 in
Reach +102 mm +4 in +87 mm +34 in
Tipping load ndash straight ndash138 kg ndash305 lb ndash132 kg ndash291 lb
Tipping load ndash full turn ndash136 kg ndash298 lb ndash130 kg ndash285 lb
Breakout force ndash112 kg ndash245 lb ndash106 kg ndash234 lb
Operating weight +111 kg +244 lb +106 kg +233 lb
26
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Operating Specifications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1220 mm 40 1220 mm 40 1220 mm 40
2 Load center 610 mm 20 610 mm 20 610 mm 20
3 Length overall 7875 mm 2510 7882 mm 2510 7942 mm 260
4 Reach ground 926 mm 30 926 mm 30 961 mm 31
5 Dig depth 47 mm 19 47 mm 19 44 mm 17
6 Reach level arm 1569 mm 51 1569 mm 51 1617 mm 53
7 Reach full lift 767 mm 26 767 mm 26 814 mm 28
8 Clearance level arm 1792 mm 510 1792 mm 510 1830 mm 60
9 Clearance full lift 3693 mm 121 3693 mm 121 3758 mm 123
10 Height overall 4676 mm 154 4676 mm 154 4740 mm 156
Tipping load ndash straight ISO 14397-1 6650 kg 14657 lb 7586 kg 16720 lb 8811 kg 19420 lb
Tipping load ndash full turn ISO 14397-1 5729 kg 12626 lb 6502 kg 14330 lb 7530 kg 16595 lb
Operating weight 12 577 kg 27719 lb 13 494 kg 29741 lb 15 432 kg 34012 lb
Rated load of full turn tip
50 of tip SAE J1197 2864 kg 6313 lb 3251 kg 7165 lb 3765 kg 8297 lb
60 of tip rough terrain EN474-3 3437 kg 7575 lb 3901 kg 8598 lb 4518 kg 9957 lb
80 of tip firm and level EN474-3 4583 kg 10100 lb 5202 kg 11464 lb 6024 kg 13276 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 1566 mm 51 1566 mm 51 1566 mm 51
13 Maximum fork spacing 1550 mm 51 1550 mm 51 1550 mm 51
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
27
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Operating Specifications
Operating Specifications with Construction Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Construction Fork ndash Fusion
924K 930K 938K
1 Fork tine length 1524 mm 50 1524 mm 50 1524 mm 50
2 Load center 762 mm 26 762 mm 26 762 mm 26
3 Length overall 8298 mm 272 8305 mm 272 8366 mm 275
4 Reach ground 1045 mm 35 1045 mm 35 1081 mm 36
5 Dig depth ndash120 mm ndash47 ndash120 mm ndash47 ndash119 mm ndash47
6 Reach level arm 1627 mm 54 1627 mm 54 1675 mm 55
7 Reach full lift 825 mm 28 825 mm 28 872 mm 210
8 Clearance level arm 1729 mm 58 1729 mm 58 1766 mm 59
9 Clearance full lift 3630 mm 1110 3630 mm 1110 3693 mm 121
10 Height overall 4935 mm 162 4935 mm 162 0 mm 0
Tipping load ndash straight ISO 14397-1 5951 kg 13115 lb 6824 kg 15039 lb 7973 kg 17571 lb
Tipping load ndash full turn ISO 14397-1 5096 kg 11231 lb 5817 kg 12821 lb 6781 kg 14945 lb
Operating weight 12 911 kg 28456 lb 13 829 kg 30478 lb 15 767 kg 34749 lb
Rated load of full turn tip
50 of tip SAE J1197 2548 kg 5615 lb 2909 kg 6410 lb 3391 kg 7472 lb
60 of tip rough terrain EN474-3 3058 kg 6738 lb 3490 kg 7692 lb 4069 kg 8967 lb
80 of tip firm and level EN474-3 4077 kg 8985 lb 4654 kg 10256 lb 5425 kg 11956 lb
11 Minimum fork spacing 300 mm 11 300 mm 11 300 mm 11
12 Carriage width 2498 mm 82 2498 mm 82 2498 mm 82
13 Maximum fork spacing 2375 mm 79 2375 mm 79 2375 mm 79
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Full compliance to EN474-3 and SAE J1197 Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
28
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Operating Specifications with Material Handling Arm
5
6
7
8
13
18 19
20
21
12
11
14
4
3
10
9
2
1
15
16
17
22
Material Handling Arm ndash Fusion
924K 930K 938K 924K 930K 938K
1 2113 mm 611 2113 mm 611 2144 mm 70 12 5327 mm 175 5327 mm 175 5376 mm 177
2 2333 mm 77 2333 mm 77 2362 mm 78 13 1854 mm 60 1854 mm 60 1890 mm 62
3 2919 mm 96 2919 mm 96 2943 mm 97 14 863 mm 29 863 mm 29 906 mm 211
4 3505 mm 116 3505 mm 116 3525 mm 116 15 1045 mm 35 1045 mm 35 1089 mm 36
5 5257 mm 172 5257 mm 172 5343 mm 176 16 1276 mm 42 1276 mm 42 1324 mm 44
6 5568 mm 183 5568 mm 183 5655 mm 186 17 1507 mm 411 1507 mm 411 1559 mm 51
7 6112 mm 200 6112 mm 200 6204 mm 204 18 1975 mm 65 1975 mm 65 1983 mm 66
8 6657 mm 2110 6657 mm 2110 6754 mm 221 19 2310 mm 76 2310 mm 76 2316 mm 77
9 3354 mm 110 3354 mm 110 3403 mm 111 20 3076 mm 101 3076 mm 101 3081 mm 101
10 3727 mm 122 3727 mm 122 3775 mm 124 21 3842 mm 127 3842 mm 127 3846 mm 127
11 4527 mm 1410 4527 mm 1410 4575 mm 150 22 5730 mm 189 5737 mm 189 5762 mm 1810
Operating weight 12 444 kg 27426 lb 13 361 kg 29447 lb 15 244 kg 33597 lb
Rated load (50 of full turn tip SAE J1197)
Fixed tab (9) 2053 kg 4525 lb 2329 kg 5133 lb 2705 kg 5962 lb
Minimum extension (10) 1882 kg 4148 lb 2135 kg 4705 lb 2482 kg 5470 lb
Middle extension (11) 1597 kg 3518 lb 1811 kg 3991 lb 2109 kg 4647 lb
Maximum extension (12) 1386 kg 3055 lb 1572 kg 3465 lb 1833 kg 4040 lb
Full compliance to EN474-3 and SAE J1197
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On Fusion ISO 23727
924K 930K 938K 924K 930K 938K 924K 930K 938K
Rated capacity m3 30 35 41 30 35 41 30 35 41 yd3 39 46 54 39 46 54 39 46 54
Struck capacity m3 29 33 39 29 33 39 29 33 39 yd3 38 43 51 38 43 51 38 43 51
Bucket width mm 2550 2550 2750 2550 2550 2750 2550 2550 2750 ftin 84 84 90 84 84 90 84 84 90
Nominal material density kgm3 1050 1015 1006 1020 992 976 980 953 947 100 fill factor lbyd3 1780 1702 1684 1730 1663 1634 1662 1598 1585
1 Length overall mm 7948 8005 8107 7979 8036 8149 8145 8202 8305 ftin 260 263 267 262 264 268 268 2610 272
2 Dump clearance full lift mm 4255 4216 4248 4328 4291 4333 4496 4459 4494 rolled out ftin 1311 139 1311 142 140 142 149 147 148
3 Clearance level bucket mm 4598 4598 4668 4662 4662 4740 4825 4825 4895 ftin 151 151 153 153 153 156 159 159 160
4 Height overall mm 6184 6226 6295 6248 6290 6367 6411 6453 6523 ftin 203 205 207 205 207 2010 210 212 214
5 Reach full lift rolled out mm 1451 1482 1548 1453 1486 1559 1538 1571 1637 ftin 49 410 50 49 410 51 50 51 54
6 Dig depth mm 100 100 101 100 100 101 92 92 92 in 39 39 4 39 39 4 36 36 36
Turning radius bucket mm 6096 6113 6293 6087 6104 6286 6118 6136 6315 at carry ftin 1911 200 207 1911 200 207 200 201 208
7 Maximum dump angle deg 52 52 51 49 49 49 48 48 50 8 Rack angle at carry deg 43 43 43 45 45 45 43 43 43
Tipping load ndash straight kg 7408 8405 9792 7235 8246 9545 6957 7932 9257 ISO 14397-1 lb 16326 18525 21582 15945 18175 21036 15332 17481 20401 Tipping load ndash straight kg 7716 8755 10 200 7536 8590 9942 7247 8262 9642 rigid tire lb 17006 19296 22481 16609 18932 21912 15971 18210 21251 Tipping load ndash full turn kg 6299 7107 8253 6122 6941 8007 5883 6672 7766 ISO 14397-1 lb 13882 15662 18189 13492 15299 17647 12965 14705 17115 Tipping load ndash full turn kg 6701 7560 8780 6513 7385 8518 6258 7098 8262 rigid tire lb 14768 16662 19350 14353 16275 18774 13793 15644 18208 Breakout force kg 6509 8225 9066 6420 8126 8895 5657 7220 7988
lb 14346 18128 19980 14149 17909 19604 12467 15913 17605 Operating weight kg 13 258 14 281 16 252 13 602 14 625 16 648 13 540 14 564 16 537
lb 29220 31474 35820 29978 32232 36691 29842 32098 36448
High Lift
924K 930K 938K
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
ndash ndash ndash ndash ndash ndash
+642 +793 +740 +21 +27 +25
+439 +567 +545 +15 +110 +19
+448 +572 +553 +15 +110 +19
+448 +572 +553 +15 +110 +19
+252 +327 +275 +9 +10 +10
+35 +35 +35 +14 +14 +14
+333 +405 +378 +11 +13 +12
ndash ndash ndash ndash ndash ndash
ndash1830 ndash2376 ndash2571 ndash4032 ndash5235 ndash5666
ndash1906 ndash2474 ndash2678 ndash4200 ndash5453 ndash5902
ndash1617 ndash2088 ndash2250 ndash3562 ndash4601 ndash4959
ndash1720 ndash2221 ndash2394 ndash3790 ndash4895 ndash5275
ndash374 ndash225 ndash393 ndash824 ndash496 ndash865
+299 +247 +249 +659 +544 +549
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Compliance to ISO 14397-1 (2007) Sections 1 through 5 Dimensions listed are for a machine configured with rollout bucket counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
30
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
3 2
6
4
1
5
8
7
Bucket Selection Table for High Dump Buckets
High Lift
kgm3 lbyd3
Pin
On
924K
ndash265 ndash447 ndash226 ndash380 ndash191 ndash322
930K
ndash345 ndash582 ndash293 ndash494 ndash248 ndash418
938K ndash269 ndash452
Fusi
on
924K
930K
938K
Bucket Fill Factor kgm3 650 725 800 875 950 1025 1100
lbyd3 1095 1222 1348 1474 1601 1727 1854
m3 yd3
30 39 109 101 35 46 109 100 41 54 112 100 30 39 108 101 95 35 46 115 106 98 41 54 105 96 41 54 114 105 97
30 39 115 106 98 ndash271 ndash457 35 46 106 97 ndash231 ndash390 41 54 109 98 ndash196 ndash330 30 39 113 106 99 ndash353 ndash594 35 46 112 103 96 ndash300 ndash506 41 54 113 103 94 ndash254 ndash428 30 39 110 103 98 ndash380 ndash640 35 46 113 106 99 ndash324 ndash545 41 54 111 103 95 ndash274 ndash462
1175 1250 1325 1400
1980 2106 2233 2359
31
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
3
4 3
3
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
11 6
7 9
8
12
10
5
3
2
1
4
Multi Purpose ndash Fusion
924K 930K 938K
Rated capacity 21 m3 27 yd3 21 m3 27 yd3 21 m3 27 yd3
Struck capacity 20 m3 26 yd3 20 m3 26 yd3 20 m3 26 yd3
1 Length ndash dozer edge to bumper 6744 mm 221 6751 mm 221 6815 mm 224
2 Length overall ndash closed clam 7455 mm 245 7462 mm 245 7525 mm 248
3 Length overall ndash open clam 8104 mm 267 8111 mm 267 8175 mm 269
4 Dig depth 100 mm 3 100 mm 3 101 mm 3
5 Clearance full lift 45deg dump 2962 mm 98 2962 mm 98 3017 mm 910
6 Clearance full lift ndash open clam 3577 mm 118 3577 mm 118 3638 mm 1111
7 Height overall 5791 mm 1811 5791 mm 1811 5864 mm 192
8 Reach full lift ndash open clam 809 mm 27 809 mm 27 857 mm 29
9 Reach full lift 45deg dump 1130 mm 38 1130 mm 38 1176 mm 310
10 Maximum dump angle 56deg 56deg 56deg
11 Rack angle at carry 45deg 45deg 45deg
12 Clam open distance 995 mm 33 995 mm 33 995 mm 33
13 Bucket width 2550 mm 84 2550 mm 84 2550 mm 84
Turning radius ndash bucket at carry 5925 mm 195 5925 mm 195 6004 mm 198
Tipping load ndash straight ISO 14397-1 8071 kg 17787 lb 9317 kg 20534 lb 10 920 kg 24068 lb
Tipping load ndash full turn ISO 14397-1 6860 kg 15119 lb 7890 kg 17388 lb 9234 kg 20351 lb
Breakout force 9870 kg 21752 lb 12 864 kg 28352 lb 14 567 kg 32105 lb
Operating weight 13 409 kg 29554 lb 14 326 kg 31575 lb 16 209 kg 35724 lb
Full compliance to ISO 14397-1 (2007) Sections 1 through 6 which requires 2 verification between calculation and testing Dimensions listed are for a machine configured with Fusion work tool counterweights additional guarding 80 kg (176 lb) operator and Michelin 205 R25 (L-3) XHA2 tires
32
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
Optional Equipment
Supplemental Specifications
924K 930K 938K
Tipping load ndash Tipping load ndash Tipping load ndash full turn with full turn with full turn with
Operating 19 m3 (25 yd3) Operating 21 m3 (275 yd3) Operating 25 m3 (325 yd3) weight Fusion bucket weight Fusion bucket weight Fusion bucket
Change with options removed kg lb kg lb kg lb kg lb kg lb kg lb
Optional counterweight 0 0 0 0 ndash320 ndash705 ndash502 ndash1106 ndash320 ndash705 ndash593 ndash1306
Guard crankcase ndash11 ndash23 ndash16 ndash34 ndash11 ndash23 ndash13 ndash29 ndash11 ndash24 ndash17 ndash36
Guard power train lower ndash77 ndash170 ndash77 ndash168 ndash77 ndash170 ndash69 ndash151 ndash68 ndash150 ndash67 ndash146
Guard driveshaft ndash44 ndash96 ndash12 ndash26 ndash44 ndash96 ndash12 ndash26 ndash45 ndash100 ndash12 ndash27
Roading fenders ndash18 ndash38 ndash28 ndash61 ndash18 ndash38 ndash24 ndash52 ndash18 ndash38 ndash28 ndash60
Secondary steer ndash69 ndash151 ndash75 ndash164 ndash69 ndash151 ndash73 ndash161 ndash69 ndash151 ndash74 ndash162
Ride control ndash49 ndash107 ndash27 ndash59 ndash49 ndash107 ndash26 ndash57 ndash49 ndash107 ndash27 ndash59
Change with options added
Guard front window +34 +74 +17 +37 +34 +74 +18 +39 +34 +74 +18 +39
Guard rear waste gate +276 +608 +596 +1313 +276 +608 +488 +1075 +276 +608 +581 +1280
Guard power train side +11 +24 +10 +22 +11 +24 +9 +19 +11 +24 +10 +22
Cold start package +54 +119 +104 +229 +54 +119 +74 +163 +54 +119 +101 +222
Optional tool box +44 +96 +37 +81 +44 +96 +25 +55 +44 +96 +36 +79
Logger counterweight +400 +881 +661 +1456 +400 +881 +557 +1227 +400 +881 +645 +1421
33
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K 930K 938K Standard Equipment
Standard equipment may vary Consult your Cat dealer for details
POWER TRAIN bull Axle seal guards bull Auto idle shut down feature bull Brakedecelerator pedal bull Cat C66 ACERTtrade engine
ndash Tier 4 InterimStage IIIB compliant ndash Turbocharged and aftercooled ndash Filtered crankcase breather ndash Diesel particulate fi lter
bull Coolant protection to ndash34deg C (ndash29deg F) bull Differential lock in front axle bull Differential rear open bull Dry type air cleaner bull Enclosed wet disc full hydraulic brakes bull Fuel priming pump automatic bull Fuel water separator bull Hydraulically driven demand cooling fan bull Hydrostatic transmission with electronic speed range control
ndash 4 speed ranges ndash Rimpull control ndash Creeper control
bull Lubed for life driveshafts bull Parking brake electric bull Single plane cooling system with remote coolant reservoir bull SmiddotOmiddotSSM port engine coolant and transmission oil bull Thermal starting aid (glow plugs) bull Throttle lock bull Transmission directional control on implement joystick bull Transmission sight gauge bull Transmission oil cooler (938K only)
HYDRAULICS bull Heavy duty hydraulic cooler bull Hydraulic diagnostic connectors and SmiddotOmiddotSSM ports bull Hydraulic sight gauge visible bull Load sensing hydraulics and steering bull Seat-mounted hydraulic controls with FNR
ELECTRICAL bull Alternator 115-amp heavy duty bull 12V power supply in cab (2) bull Batteries 1000 CCA (2) bull 24 volt system bull Back-up alarm bull Battery disconnect switch bull Beacon ready bull Diagnostic connector bull Directional signals front and rear bull Emergency shutdown switch bull Halogen work lights front and rear bull Heavy duty gear reduction starter bull LED rear stop tail turn lights bull Remote jump start post bull Resettable main and critical function breakers bull Roading lights front and rear
OPERATOR ENVIRONMENT bull 75 mm (3 in) retractable seatbelt bull Automatic temperature control bull Cab enclosed ROPSFOPS pressurized and sound suppressed bull Cup holder bull External heated mirrors bull Ground level cab door release bull Gauges
ndash Digital direction indicator ndash Digital hour meter and odometer ndash Digital speedometer ndash Engine coolant temperature gauge ndash Fuel level indicator ndash Hydraulic oil temperature gauge ndash Tachometer
bull Hydraulic control lockout bull Interior cab lighting door and dome bull Interior rearview mirrors (2) bull Lunch box storage bull Operator warning system indicators bull Radio ready speakers bull Rear window defrost electric bull Removable fl oormat bull Seat-mounted electronic implement controls adjustable bull Sliding glass on the side windows bull Steering column mounted multi function control ndash lights wipers
turn signal bull Suspension seat fabric bull Tilt and telescopic steering wheel bull Tinted front glass bull Wet arm wiperwasher 2-speed and intermittent front bull Wet arm wiperwasher rear
OTHER STANDARD EQUIPMENT bull Automatic bucketfork positioner adjustable in-cab bull Automatic lift and bucket kickouts adjustable in-cab bull Fenders bull Large-access enclosure doors with adjustable closeopen force bull Parallel lift loader linkage with sealed pins bull Recovery hitch with pin bull Remote mounted lubrication points bull Toolbox lockable bull Vandalism protection ndash lockable compartments
EU STANDARD EQUIPMENT bull Deluxe cab bull Secondary display bull Rearview camera
NOTE Not all features are available in all regions See your Cat dealer for more information
34
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
924K 930K 938K Optional Equipment
Optional equipment may vary Consult your Cat dealer for details
bull Antifreezecoolant extended-life protects to ndash50deg C (ndash58deg F) bull Axles differential limited slip rear bull Beacon light rotating or strobe bull Cab deluxe includes
(standard in Europe optional in North America) ndash Automatic blower control ndash Electrically adjustable external heated mirrors (2) ndash LED interior lighting ndash Secondary display ndash Sunscreen ndash Visor
bull Camera rearview (standard in Europe) bull Cold start package
ndash Ether starting aid ndash Block heater ndash Additional batteries (2)
bull Counterweight heavy bull Counterweight logger bull Coupler Fusion bull Coupler ISO 23727 bull Coupler jumper lines third function bull Debris package bull Debris package ndash cleaning arrangement bull Fenders roading bull Fenders full coverage bull Guards
ndash Power train lower ndash Power train side ndash Crankcase ndash Driveshaft ndash Windshield
bull Hydraulic control auxiliary third and fourth function bull Jumper lines third function bull Linkage high lift bull Lights auxiliary halogen or HID bull Machine Security System bull Product Link bull Radio packages
ndash Radio ready with Bluetooth interface microphone and auxiliary inputs for MP3 players
ndash Radio AMFM with CD player ndash Radio AMFM with CD player deluxe Bluetooth interface
microphone and auxiliary inputs for MP3 players bull Ride Control System bull Seats
ndash Deluxe seat ndash fully adjustable fabric air suspension seat with high seat backrest
ndash Premium seat ndash fully adjustable heated fabric air suspension seat with high seat backrest and lumbar support Seat is heated and ventilated on bottom cushion and backrest
bull Steering ndash Dual mode ndash Secondary
bull Tires ndash Bias ply 205-25 ndash Radial 175 R25 205 R25 55065 R25 65065 R25 ndash Flexport ndash SkidderAgriculture
bull Toolbox additional bull Work tools
NOTE Not all features are available in all regions See your Cat dealer for more information
35
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
20
924K 930K 938K Wheel Loaders
For more complete information on Cat products dealer services and industry solutions visit us on the web at wwwcatcom
copy 2012 Caterpillar Inc
All rights reserved
Materials and specifications are subject to change without notice Featured machines in photos may include additional equipment See your Cat dealer for available options
CAT CATERPILLAR SAFETYCATCOM their respective logos ldquoCaterpillar Yellowrdquo and the ldquoPower Edgerdquo trade dress as well as corporate and product identity used herein are trademarks of Caterpillar and may not be used without permission
AEHQ6699-01 (10-2012) Replaces AEHQ6699
- 924K 930K 938K Wheel Loaders
-
- Contents
-
- Parallel Lift Loader Linkage
- Industry Leading Operator Station
- Power Train
- Hydraulics
- Work Tools
- Options
- Serviceability
- Customer Support
- Wheel Loader Specifications
-
- Engine
- Engine Power and Torque
- Buckets
- Weights
- Steering
- Loader Hydraulic System
- Service Refill Capacities
- Transmission
- Power Train
- Tires
- Cab
- Operating Specifications
- Dimensions with Bucket
-
- Standard Lift
- High Lift
-
- Supplemental Operating Data ndash Tires
-
- Bucket Specifications
-
- 924K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 924K Bucket Selection Table
- 924K Fill Factors
- 924K Ground Engagement Options
- 930K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 930K Bucket Selection Table
- 930K Fill Factors
- 930K Ground Engagement Options
- 938K Operating Specifications with Buckets
-
- General Purpose
- Light Material
- High Lift
-
- 938K Bucket Selection Table
- 938K Fill Factors
- 938K Ground Engagement Options
-
- Operating Specifications
-
- Operating Specifications with Pallet Forks
- Operating Specifications with Construction Forks
- Operating Specifications with Material Handling Arm
- Operating Specifications with High Dump Buckets
- Bucket Selection Table for High Dump Buckets
- Operating Specifications with Multi-Purpose Bucket
-
- Supplemental Specifications
-
- Optional Equipment
-
- Standard Equipment
- Optional Equipment
-
top related