orelap #4112 r-5185-myremede shampoo · bryce kidd, ph.d. lab director aaron troyer chief science...

Certificate of Analysis

Product Name: MyRemede 75 mg ShampooBatch ID/Lot #: 111419DExtraction Type: Full Spectrum Hemp ExtractProduct Type: ShampooSample Weight: 190 g

Tests Performed: Type of Test Test Facility Reported DateX Cannabinoid Profile Lightscale LabsX Heavy Metals Lightscale LabsX Residual Solvents Lightscale LabsX Microbials Lightscale LabsX Mycotoxins Lightscale Labs

% = Percent (Weight of Analyte / Weight of Product)* Total THC = THC + (THCa *(0.877)) ** Total CBD = CBD + CBDa

HEAVY METALS Mycotoxin

MICROBIALS RESIDUAL SOLVENTS

CHEMICAL RESIDUES

Full analytic details available on subsequent pages.

POTENCY

2019-11-19

2019-11-192019-11-192019-11-19

2019-11-19

Components Tested: Abamectin, Azoxystrobin, Bifenazate, Etoxazole, Imazalil, Imidacloprid, Malathion, Myclobutanil, Permethrin, Spinosad, Spiromesifen, Spirotetramat, Tebuconazole

Components Tested: Arsenic, Cadmium, Lead, Mercury

Impurities Tested: STEC, Salmonella, Yeast & Mold

Components Tested: Acetone, Benzene, Butanes, Ethanol, Ethyl-Acetate, Heptanes, Hexanes, Isopropanol, Methanol, n-Pentane, Propane, Toluene, Xylenes

Components Tested: Aflatoxin B1, Aflatoxin B2, Aflatoxin G1, Aflatoxin G2, Ochratoxin A

0.00%Total THC*

CBD 32.66 mg

CBDa38.74 mg

70.4 mgTotal CBD**

THC Profile CBD Profile

70.4 mgTotal Cannabinoids

THCa (0 mg)

Delta 9 THC (0 mg)

CBDa (37.235 mg)

CBD (32.865 mg)

CBGa (0 mg)

CBG (0 mg)

CBCa (0 mg)

CBC (0 mg)

Cannabinoid Profile

STATUS

PASS

STATUS

PASSSTATUS

PASS

STATUS

PASSSTATUS

PASS

2535 N Ross AvePortland, OR 97227(503) 493-2535

info@lightscale.comORELAP #4112OLCC #010-1003340D344

R-5185-MyRemede ShampooMyRemede1411 Ford RoadBensalem, PA 19020

Sample Type: OtherSample Date: 11/12/2019Analysis Date: 11/14/2019Report Date: 11/19/2019

Metrc Batch ID:

Metrc Sample ID:

Harvest/Process Date: 10/15/2019

Report ID:

LS-191119-89

TotalTHC

TotalCBD

PotencyPotency Analysis Date: 11/14/2019Potency Batch ID: CAN_111419DPotency Method: JAOAC 2015.1

70.1 mg/unitNDSamples: PFW-WHC-HNP1 unit = 190g

Analyte Description LOQ RPD Min. Max. Conc. Unit: %

Δ9THC Delta-9 Tetrahydrocannabinol 0.0080 - - - ND

THCA Tetrahydrocannabinolic acid 0.0080 - - - ND

CBD Cannabidiol 0.0080 - - - 0.0173

CBDA Cannabidiolic acid 0.0080 - - - 0.0196

Δ8THC Delta-8 Tetrahydrocannabinol* 0.0080 - - - ND

THCV Tetrahydrocannabivarin* 0.0080 - - - ND

CBG Cannabigerol* 0.0080 - - - <LOQ

CBGA Cannabigerolic acid* 0.0080 - - - <LOQ

CBC Cannabichromene* 0.0080 - - - <LOQ

CBCA Cannabichromenic acid* 0.0080 - - - ND

CBN Cannabinol 0.0080 - - - <LOQ

Total THC Δ9THC + (THCA × 0.877) - - - ND

Total CBD CBD + (CBDA × 0.877) - - - 0.0345

Total - - - 0.0369

Bryce Kidd, Ph.D.Lab Director

Aaron TroyerChief Science Officer

This data cannot be used for OLCC or OHAcompliance for usable marijuana or marijuanaproducts and is provided for Research andDevelopment purposes only. L S - 1 9 1 1 1 9 - 8 9

Lightscale Labs is accredited by ORELAP (Lab #4112) for analysis in compliance with OAR 333-064 and OAR 333-007. Results pertain to submitted samples only. Unless otherwise

noted, samples were received in good condition and Quality Control samples met acceptance criteria. This Certificate shall not be reproduced except in full, without the written

approval of Lightscale Labs. Results marked with an asterisk (*) are not within scope of accreditation and for informational purposes only. 1 of 2

2535 N Ross AvePortland, OR 97227(503) 493-2535

info@lightscale.comORELAP #4112OLCC #010-1003340D344

R-5185Anandapure, LLC350 Greenwood AvenueReedsport, OR 97467302-981-1558

Sample Type: OtherSample Date: 11/12/2019Analysis Date: 11/14/2019Report Date: 11/19/2019

Metrc Batch ID:

Metrc Sample ID:

Harvest/Process Date: 10/15/2019

Report ID:

LS-191119-89

Qualifier Flag Descriptions

J Reported result is an estimate - the value is less than the minimum calibration level but greater than the estimated detection limit (EDL)

U The analyte was not detected in the sample at the estimated detection limit (EDL)

E Exceeds calibration range

D Dilution data - result was obtained from the analysis of a dilution

B Analyte found in sample and associated blank

C Co-eluting compound

R Relative Percent Difference (RPD) outside control limits

NR Analyte not reported because of problems in sample preparation or analysis

ND Non-Detect

X Results from reinjection/repeat/re-column data

EMC Estimated maximum possible concentration - indicates that a peak is detected but did not meet the method required criteria

M Manual integration

PS Peaks split

HB Control acceptance criteria are exceeded high and the associated sample is below the detection limit

LB Control acceptance criteria are exceeded low and the associated sample exceeds the regulatory limit

ME Marginal Exceedance

LR Low Recovery Analyte

LOQ Limit of Quantitation

Lightscale Labs is accredited by ORELAP (Lab #4112) for analysis in compliance with OAR 333-064 and OAR 333-007. Results pertain to submitted samples only. Unless otherwise

noted, samples were received in good condition and Quality Control samples met acceptance criteria. This Certificate shall not be reproduced except in full, without the written

approval of Lightscale Labs. Results marked with an asterisk (*) are not within scope of accreditation and for informational purposes only. 2 of 2