our range of chains 2016-renewable energy

1

OUR RANGE OF CHAINS AND FITTINGS:

1) MARINE AND OFFSHORE RENEWABLE ENERGY: ���� MOORING CHAINS (STUD LINK AND STUDLESS) FROM 14 MM AND UP TO:

���� 120 mm Dia. (4’’ 3/4) in Marine grades 2 & 3

���� 200 mm Dia. (7’’ 7/8) in Offshore grades: NVR3, NV R3S

���� 180 mm Dia. (7” 1/16) in Offshore grades: NVR4 & NV R5

���� FOR OFFSHORE FLOATING WIND TURBINES IN DEEP-WATER E NVIRONMENTS:

- WITH FLOATING TRIPODS - WITH “BUOYANCY STABILIZED” BARGE WITH CATENARY MOOR ING LINES - WITH BALLAST STABILIZED “SPAR BUOY” WITH CATENARY M OORING & DRAG-

EMBEDDED ANCHORS

2

���� FOR FLOATING WIND ENERGY TESTING DEVICES (WIND RESOURCE ASSESSMENT BUOYS AND OCEAN DATA ACQUISITION FLOATING SYSTEMS)

���� FOR WAVE ENERGY FLOATING GENERATORS OR CONVERTERS :

3

���� FOR TIDAL ENERGY FLOATING TURBINES OR GENERATORS:

2) OIL AND GAS INDUSTRY: ����OFFSHORE MOORING CHAINS (STUD LINK AND STUDLESS):

● up to 200 mm (7’’ 7/8) in grade NVR3 & NVR3S

● up to 180 mm (7’’ 1/16) in grade NVR4 & grade NVR5

4

���� FITTINGS MOUNTED ON OFFSHORE MOORING CHAINS: LTM S HACKLES, H SHACKLES, SLIM KENTER SHACKLES, CLOSED SWIVELS, LLC LINKS …

���� CHAFE CHAINS ASSEMBLIES, IN GRADE 3, ORQ, AND 4 AS PER 1993 AND 2007 OCIMF RECOMMENDATIONS

���� CORRESPONDING FITTINGS IN FORGED OR CAST STEEL SUCH AS: TRIANGULAR PLATES, OBLONG PLATES, PEAR LINKS… .

5

���� CHAINS FOR INSTALLATION/ HANDLING OF HOSES: SNUBBING CHAINS, PICK UP CHAINS, HANG-OFF CHAINS, L IFTING CHAINS, FOR HOSES PIPES IN GRADE 3 OR (GRADE 80)

���� USED OR SECOND HAND CHAINS (GOOD CONDITION) FOR OFFSHORE APPLICATIONS IN GRADE 3, R3, R4 UP TO 120 MM DIAMET RE AVAILABLE IN STOCK

6

3) OTHER FIELDS OF ACTIVITIES: ���� STUD LINK ANCHOR CHAINS IN GRADE 2 AND 3, WITH CORRESPONDING ANCHORS AND FITTINGS

���� OPEN LINK CHAINS FOR ANCHORING AND MOORING MADE OF SHORT LIN KS OR LONG LINKS IN GRADE SL2 (GRADE 40) OR GRADE SL3 (GRADE 60), WITH CORRESPONDING ANCHORS AND FITTINGS.

���� For : ���� SHIPBUILDING AND SHIPREPAIRING YARDS /SHIPOWNERS

���� MINISTRIES OF DEFENCE IN FRANCE AND ABROAD ���� MILITARY SHIPBUILDING YARDS AND NAVIES ���� LIGHTHOUSES AND MARITIME ADMINISTRATIONS

7

���� FENDER CHAINS FROM 18 MM TO 50 MM MADE WITH SHORT OR LONG LINKS IN MILD STEEL (GRADE 40), OR IN HIGH RESISTANCE STE EL (GRADE 60), EITHER HOT DIP GALVANISED, ZINKED OR IN STAINLESS STEEL.

���� For : ���� PORTS AUTHORITIES ���� FABRICATORS/ SUPPLIERS OF RUBBER FENDERS