owner’s manual manuel du propriétaire manual del …...manual del propietario english français...
Post on 28-Jun-2020
0 Views
Preview:
TRANSCRIPT
Quick Use Guide Inside!Guide d’usage Rapide Incluse!Guía de Uso Rápido Incluida!
MODEL NUMBER SERIAL NUMBER
1-866-341-37381-866-341-37381-866-341-3738
Necesita ayudainmediata?
Owner’s ManualManuel du PropriétaireManual del Propietario
EnglishFrançais
Español
26MF321BLCD TV
Know these safety symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk ofelectric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCKDO NOT OPEN
The caution marking is located on the rear or bottom of the cabinet.
CAUTION
*Product Safety Notification *Additional Benefits By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.
Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out.Complete and return your Product Registration Card at once or visit at www.magnavox.com/support to ensure:
Visit our World Wide Web Site at www.magnavox.com/support
Return your Product Registration Card or visit atwww.magnavox.com/support today to get the very most from your purchase.
Wall Mount Bracket KitRecommended Wall Mount Bracket Kit:Brand: SYLVANIA Model #: SYL-MA3210B
Recommended Screw dimension: M4x0.472”(12mm)
• TherecommendedWallMountBracketKit(soldseparately)allowsthemountingoftheTVonthewall.
• Fordetailedinformationoninstallingthewallmount,refertotheWallMountInstructionBook.
• FunaiisnotresponsibleforanydamagetotheproductorinjurytoyourselforothersifyouelecttoinstalltheTVWallMountBracketormounttheTVontotheBracketonyourown.
• TheWallMountBracketmustbeinstalledbyexperts.
Funai not liable for these types of accidents or injury noted below.• InstalltheWallMountBracketonasturdyverticalwall.• Ifinstalledontoaceilingorslantedwall,theTVandWall
MountBracketmayfallwhichcouldresultinasevereinjury.• Donotusescrewsthatarelongerorshorterthantheir
specifiedlength.IfscrewstoolongareusedthismaycausemechanicalorelectricaldamageinsidetheTVset.IfscrewstooshortareusedthismaycausetheTVsettofall.
• Donotfastenthescrewsbyexcessiveforce;thismaydamagetheproductorcausetheproducttofall,leadingtoaninjury.
• Forsafetyreasonsuse2peopletomounttheTVontoaWallMountingBracket.
• DonotmounttheTVontotheWallMountingBracketwhileyourTVispluggedinorturnedon.Itmayresultinanelectricalshockinjury.
When installing the unit on the wall, allow this much space.Top: 11.8inches (30cm)Left and right side: 5.9inches (15cm)Bottom: 3.9inches (10cm)
2
IMPORTANT SAFETY INSTRUCTIONSRead before operating equipment
1. Readtheseinstructions.2. Keeptheseinstructions.3. Heedallwarnings.4. Followallinstructions.5. Donotusethisapparatusnearwater.6. Cleanonlywithdrycloth.7. Donotblockanyventilationopenings.
Installinaccordancewiththemanufacturer’sinstructions.8. Donotinstallnearanyheatsourcessuchasradiators,heat
registers,stoves,orotherapparatus(includingamplifiers)thatproduceheat.
9. Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.Apolarizedplughastwobladeswithonewiderthantheother.Agroundingtypeplughastwobladesandathirdgroundingprong.Thewidebladeorthethirdprongareprovidedforyoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.
10. Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.
11. Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
12. Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwiththeappara-tus.Whenacartisused,usecautionwhenmovingthe
cart/apparatuscombinationtoavoidinjuryfromtip-over.13. Unplugthisapparatusduringlightningstormsorwhenun-
usedforlongperiodsoftime.14. Referallservicingtoqualifiedservicepersonnel.Servicingis
requiredwhentheapparatushasbeendamagedinanyway,suchaspower-supplycordorplugisdamaged,liquidhasbeenspilledorobjectshavefallenintotheapparatus,theapparatushasbeenexposedtorainormoisture,doesnotoperatenormally,orhasbeendropped.
15. Damage Requiring Service-Theapplianceshouldbeservicedbyqualifiedservicepersonnelwhen:
A.Thepowersupplycordortheplughasbeendamaged; B. Objectshavefallen,orliquidhasbeenspilledintothe
appliance; C.Theappliancehasbeenexposedtorain D.Theappliancedoesnotappeartooperatenormallyor
exhibitsamarkedchangeinperformance; E. Theappliancehasbeendropped,ortheenclosuredamaged.
16. Tilt/Stability-Alltelevisionsmustcomplywithrecommendedinternationalglobalsafetystandardsfortiltandstabilitypropertiesofitscabinetdesign.
•Donotcompromisethesedesignstandardsbyapplyingexcessivepullforcetothefront,ortop,ofthecabinetwhichcouldultimatelyoverturntheproduct.
•Also,donotendangeryourself,orchildren,byplacingelectronicequipment/toysonthetopofthecabinet.Suchitemscouldunsuspectinglyfallfromthetopofthesetandcauseproductdamageand/orpersonalinjury.
17. Wall or Ceiling Mounting -Theapplianceshouldbemountedtoawallorceilingonlyasrecommendedbythemanufacturer.
18. Power Lines-Anoutdoorantennashouldbelocatedawayfrompowerlines.
19. Outdoor Antenna Grounding-Ifanoutsideantennaisconnectedtothereceiver,besuretheantennasystemisgroundedsoastoprovidesomeprotectionagainstvoltagesurgesandbuiltupstaticcharges.Section810oftheNationalElectricCode,ANSI/NFPANo.70-1984,providesinformationwithrespecttopropergroundingofthemastandsupportingstructure,ground-ingofthelead-inwiretoanantennadischargeunit,sizeofgroundingconnectors,locationofantenna-dischargeunit,connectiontogroundingelectrodes,andrequirementsforthegroundingelectrode.SeeFigurebelow.
20. Object and Liquid Entry -Careshouldbetakensothatobjectsdonotfallandliquidsarenotspilledintotheenclosurethroughopenings.
21. Battery Usage CAUTION-Topreventbatteryleakagethatmayresultinbodilyinjury,propertydamage,ordamagetotheunit:
•Installallbatteriescorrectly,with+and-alignedasmarkedontheunit.
•Donotmixbatteries(oldandneworcarbonandalkaline,etc.).
•Removebatterieswhentheunitisnotusedforalongtime.
Note to the CATV system installer :ThisreminderisprovidedtocalltheCATVsysteminstaller’sattentiontoArticle820-40oftheNECthatprovidesguidelinesforpropergroundingand,inparticular,specifiesthatthecablegroundshallbeconnectedtothegroundingsystemofthebuilding,asclosetothepointofcableentryaspractical.
Example of Antenna Grounding as per NEC - National Electric Code
ANTENNADISCHARGEUNIT(NECSECTION810-20)
GROUNDINGCONDUCTORS(NECSECTION810-21)
POWERSERVICEGROUNDINGELECTRODESYSTEM(NECART250,PARTH)
ANTENNALEADINWIRE
GROUNDCLAMPS
ELECTRICSERVICEEQUIPMENT
GROUNDCLAMP
3English
FCC WARNINGThis apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.RADIO-TV INTERFERENCEThis apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.2) Increase the separation between the apparatus and receiver.3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITYTrade Name: MAGNAVOX Responsible Party: FUNAI CORPORATION, Inc.
Model: 26MF321B Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.Telephone Number: 1 866 341 3738
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.WARNING : Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
Never use a gas duster on this TV. The gas trapped inside of this unit may cause ignition and explosion.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.
Like all LCD products, this set contains a lamp with Mercury, please dispose of according to all Local, State and Federal laws. For the disposal or recycling information, contact: www.mygreenelectronics.com or www.eiae.org
• The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
NOTE ABOUT RECYCLING • This unit’s packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com
WHEN CARRYING THIS UNIT • At least 2 people are required when
carrying this unit. • Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE • Do not handle the AC power cord with wet hands. • Do not pull on the AC power cord when disconnecting it from an
AC outlet. Grasp it by the plug. • Do not put your fingers or objects into the unit.
LOCATION AND HANDLING • Do not install the unit in direct sunlight or in a place subject to dust
or strong vibration. • Avoid a place with drastic temperature changes. • Install the unit in a horizontal and stable position. Do not place anything
directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit.
Trademark Information
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
4
Child Safety
SYL Eme_Child Safety_1EMN24522_v1 1 2008/12/17 18:05:53
5English
INTRODUCTION
ContentsImportant Safety Instructions 3Trademark Information 4Child Safety 5
INTRODUCTIONFeatures 6Supplied Accessories 7Symbols Used in this Manual 7Attaching the Base 7Mounting the Unit on Your Furniture 7Remote Control Function 8Installing the Batteries 8Control Panel 9Terminals 9
PREPARATIONAntenna Connection 10Connection to Cable Receiver or Satellite Box 10Plug In the AC Power Cord 10Initial Setup 11
WATCHING TVSleep Timer 12Switching Each Input Mode 12Freeze Mode 12Channel Selection 12TV Screen Display Mode 13Sound Functions 13TV Screen Information 14ECO 14fun-Link Options 14
USING FUNCTIONSPicture 16Sound 16Setup 17Features 18Language 23USB 24
CONNECTING DEVICESExternal Device Connection 25
USEFUL TIPSFAQ 28Troubleshooting Guide 28
INFORMATIONGlossary 30Maintenance 30General Specifications 31Electrical Specification 31Other Specifications 31Limited Warranty 33
Features• DTV / TV / CATV
You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.
• Information Display (ATSC only)You can display the title, contents and other information of the current DTV program on the TV screen.
• AutoprogramThis unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.
• Child LockThis feature allows you to block children’s access to inappropriate programs.
• Closed Caption DecoderBuilt-in closed caption decoder displays text for closed caption supported programs.
• MTS / SAP TunerAudio can be selected from the remote control.
• Auto StandbyIf there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically.
• Sleep TimerYou can set the unit to go into standby mode after a specific amount of time.
• Choices for On-screen LanguageSelect your on-screen language: English, Spanish or French.
• Stereo Sound Function• PLL Frequency Synthesized Tuning
Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” buttons on the remote control.
• Various Adjustment for Picture and SoundCustomizes image quality suitable for your room and sets your sound preference.
• fun-Link via HDMI Link (HDMI Cable not Included)fun-Link allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV.
• HDMI Input• HDMI-DVI Input
If your video device has DVI output jack, use an HDMI-DVI conversion cable to connect the unit.
• Component Video Input• PC Input• AV Input• USB Terminal
The picture (JPEG) and video (Motion JPEG) files stored on a USB storage device can be played back on this unit.
• Digital Audio Output
© 2012 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.
6
Supplied AccessoriesOwner’s Manual Quick Start Guide
Quick
Start
Registration card
IMPORTANT
Remote Control andbatteries (AAA, 1.5V x 2)
AAA
AAA
TV base and 4 screws (M4 x 20)
Note • If you lose the screws, please purchase (M4 x 20) Phillips head
screws at your local store. • If you need to replace these accessories, please refer to the part
name or No. with the illustrations and call our toll free customer support line found on the cover of this manual.
When using a universal remote control to operate this unit. • Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your remote control for more details.
• We do not guarantee 100% interoperability with all universal remote controls.
Symbols Used in this ManualThe following is the description for the symbols used in this manual. Description refers to:
ATSC : Digital TV operation
NTSC : Analog / Cable TV operation
• If neither symbol appears, the operation is applicable to both.
Attaching the BaseYou must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps.
1 Check the text “FRONT” with “arrow“ on the Base’s bottom to ensure it is being installed in the correct direction. Spread a thick and soft cloth over a table as shown at step 2. Place the main unit face down onto it. Make sure not to damage the screen.
2 Insert 2 hooks under the bottom of the main unit into base holes(shown by arrow ➀), then move the base in the direction as shown by arrow ➁ until it stops and the screw holes are aligned.
FRONT
➁
➀
Make sure not to put the AC power cord between the base and the unit.
3 Drive Phillips head screws into the 4 threaded holes at the bottom of the base until they are tight.
To remove the base from this unit • Unscrew the Phillips head screws in step 3.
After the screws are removed, pull the base up toward the rear of the unit. Be careful not to drop the base when you remove it.
Note • When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location. • When attaching the base, ensure that “FRONT” with “arrow”
written on the bottom of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
Mounting the Unit on Your FurnitureScrew this unit on your furniture tightly using wood screws (not supplied) in the 2 holes at the back of the base as shown.
• Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
screw holes
rear of this unit
Note • When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
7IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
Remote Control Function
1
6
3
4 13
14
11
19
102
5
7
8
12
16
209
17
18
15
Installing the BatteriesInstallthebatteries(AAA,1.5Vx2)matchingthepolarityindicatedinsidebatterycompartmentoftheremotecontrol.
AAAAAA
AAAAAA
Battery Precautions:• Besuretofollowthecorrectpolarityasindicatedinthebatterycompartment.Reversedbatteriesmaycausedamagetothedevice.• Donotmixdifferenttypesofbatteriestogether(e.g.AlkalineandCarbon-Zinc,orrechargeablebatterieslikeni-cad,ni-mh,etc)oroldbatterieswithfreshones.• Ifthedeviceisnottobeusedforalongperiodoftime,removethebatteriestopreventdamageorinjuryfrompossiblebatteryleakage.• Donottrytorechargebatteries;theycanoverheatandrupture.
1 (power) p. 11Presstoturntheunitonandgointostandbymode.Tocompletelyturnofftheunit,youmustunplugtheACpowercord.
2 SAP p. 133 SOURCE p. 124 FREEZE p. 12
Presstofreezescreenimage.5 OK p. 116 ///(cursor) p. 117 BACK p. 148 VOL +/− p. 139 PREV CH p. 12
Presstoreturntopreviouslyviewedchannel.10 SLEEP p. 1211 FORMAT p. 13
PresstoselectaspectratioavailablefortheTVscreen.
12 RED / GREEN / BLUE / YELLOW p. 23Functionallyusefulforfun-Link.
13 MENU p. 1614 INFO p. 1415 REV E / FWD D p. 23
Presstosearchbackwardorforwardthroughthedisc.PLAY B p. 23Presstobeginthediscplayback.SKIP H / SKIP G p. 23Presstoskipbackwardorforwardchapters,titlesortracksofthedisc.PAUSE F p. 23Presstopausethediscplayback.STOP C p. 23Presstostopthediscplayback.
16 MUTE p. 1317 CH +/− p. 1218 ECO p. 14
Presstoreducepowerconsumption.19 Number buttons p. 12 • (dot)
Presstoshiftthesubchannelfromthemainchannel.20 OPTIONS p. 14, 23
Presstocallupvariousmenufromyourfun-LinkdeviceconnectedthroughanHDMIcable.
Note• Buttonsingraybackground( )arenotavailableunlessyouareconnectedtodevicesthatarecompatiblewithfun-Linkfunction.• Wedonotguarantee100%interoperabilitywithotherbrandsofHDMIlinkcompliantdevices.
8
Control Panel
MENU POWERCHANNELVOLUME− + − +
42 31
*567
1 VOLUME + / − p. 13Press to adjust the volume up (+) / down (−) or to move left (−) / right (+) when selecting menu items.
2 MENU p. 153 CHANNEL + / − p. 12
Press to select channels or to move up (+) / down (−) when selecting menu items.
4 POWER p. 11Press POWER to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power cord.
5 Standby indicator Lights up red when the unit is in Standby mode.
6 Power On indicator Flashes while the unit is Turning On and lights up green when power is On.
7 Infrared sensorReceives IR signals from remote control.
This indicator does not function on this unit.
Terminals Side Panel8 USB Terminal p. 27
Use this terminal only to play back the picture (JPEG) and video (Motion JPEG) files stored on a USB storage device, or when software update is needed.
9 HDMI 2 Input jack p. 10, 2510 Component / Composite (VIDEO) Video Input jacks
for VIDEO p. 26Composite Video Input jack (VIDEO) is shared jack with Component Video Input (Y) jack.
11 Analog Audio (L/R) Input jacks p. 10, 25, 26, 27
Connect Analog Audio signals from Component Video / Analog Audio (L/R) jacks signal or HDMI-DVI / Analog Audio (L/R) jacks signal or Composite Video / Analog Audio (L/R) jacks signal or PC Connection / Analog Audio (L/R) jacks signal with stereo mini plug conversion cable jack on PC.Analog Audio (L/R) Input jacks are right below the Component Video Input jacks. When the Audio is monaural, then only connect to the Audio L Input jack.
12 Antenna Input jack p. 10
Rear Panel13 AC power cord p. 1014 HDMI 1 (HDMI-DVI) Input jack p. 10, 2515 Digital Audio Output jack p. 2616 PC (VGA) Input jack p. 27
13
10
9
8
12
15
16
11
14
Note for USB terminal • User should not connect any devices to the USB terminal such as
digital camera, keyboard, mouse, etc. (because these will not work). • The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked to do the software update themselves.
9IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
PREPARATION
No supplied cables are used with these connections:• Pleasepurchasethenecessarycablesatyourlocalstore.
Before you connect:BesureyourantennaorotherdeviceisconnectedproperlybeforepluggingintheACpowercord.
Antenna ConnectionConnecttheRFcoaxialcableonyourhomeoutlettotheantennainputjackofthisunit.
VHF / UHF analog
or DTV antenna
cable TV signal
or
RF coaxial cable
Onceconnectionsarecompleted,turnontheunitandbegininitialsetup.Channelscanningisnecessaryfortheunittomemorizeallavailablechannelsinyourarea.[Initial Setup]p. 11Note• IfyouhaveanyquestionabouttheDTV’santenna,visitwww.antennaweb.orgforfurtherinformation.• Dependingonyourantennasystem,youmayneeddifferenttypesofcombiners(mixers)orseparators(splitters)forHDTVsignaltheminimumRFbandpassonthesedevicesis2,000MHzor2GHz.• Foryoursafetyandtoavoiddamagetothisunit,pleaseunplugtheRFcoaxialcablefromtheantennainputjackbeforemovingtheunit.• IfyoudiduseanantennatoreceiveanalogTV,itshouldalsoworkforDTVreception.Outdoororatticantennaswillbemoreeffectivethanasettoporinsideantenna.• Toswitchyourreceptionsourceeasilybetweenantennaandcable,installanantennaselector.• Ifyouarenotreceivingasignalfromyourcableservice,contacttheCableprovider.
Connection to Cable Receiver or Satellite BoxUseanHDMIorComponentVideocablestoconnecttheHDMIortheComponentVideoInputjacksoftheunittotheHDMIortheComponentVideooutputjacksofthecablereceiver/satellitebox.Ifyouconnecttotheunit’sComponentVideoInputjacks,connectAnalogAudiocablestotheAnalogAudioL/RInputjacksrightbelowtheComponentVideoconnectorjacks.
STEREOPCM
COMPONENT VIDEO OUTPr/CrPb/CbY
AUDIO OUTRL
ANT IN
HDMI OUT
(red)(blue)(green)
cable receiver / satellite box
cable TV signal including PPV
component video cables (red / blue / green) and
audio cables
RF coaxial cable
or
or
HDMI cable
satellite dish
or
YoucanalsoconnectthisunittothecablereceiverorsatelliteboxotherthantheHDMIortheComponentVideooutputjacksorCompositeVideooutputjack( p. 26)becausetheymighthavedifferentoutputjacks.Requiredcablesandconnectingmethodsofthecablereceiver/satellitebox,ortheavailabilitychannelfortheclearQAMmaydifferdependingonthecable/satelliteproviderorlocalTVbroadcaster.Formoreinformation,pleasecontactyourcable/satelliteproviderorlocalTVbroadcaster.Note• UseanHDMIcablewiththeHDMIlogo(acertifiedHDMIcable).HighSpeedHDMIcableisrecommendedforthebettercompatibility.
Plug In the AC Power CordMakesurethattheACpowercordmustbepluggedtoanACoutletafterallthenecessaryconnectionsaremade.Caution:• DonotconnecttheACpowercordtoapowersupplyoutsidetheindicatedvoltageofthisunit(AC120V).ConnectingtheACpowercordtoapowersupplyoutsideofthisrangemayresultinfireorelectricalshocks.
Note• Eachtimeyouplug intheACpowercord,nooperationswillbeperformedforafewseconds.Thisisnotamalfunction.
10
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.
Initial SetupThissectionwillguideyouthroughtheunit’sinitialsettingwhichincludesselectingalanguageforyouron-screenmenuandautoprogram,whichautomaticallyscansandmemorizesviewablechannels.Before you begin:Makesuretheunitisconnectedtoantennaorcable.1 Aftermakingallthenecessaryconnections,
press toturnontheunit.• Itmaytakeafewmomentstoturnontheunitforthefirsttime.
• [Initial Setup]menuappearsautomaticallyaftertheunitisturnedon.
2 Use/toselecttheon-screenlanguagefromthechoices(English/Español/Français)ontherightsideoftheTVscreen,thenpressOK.
3 Use/toselect[Antenna]forTVchannelsor[Cable]forCATVchannels,thenpressOK.
Initial Setup
Make sure the antenna is connected to ''ANT. IN'' jack.Select your signal source.
AntennaCableSkip
AntennaCable Or
ANT.IN
Select OK OKBACK
BackMENU
Skip
• [Autoprogram]willbegin.Initial Setup
Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete.
0%
Digital channels 0 ch
Analog channels 0 ch
MENU
Skip
4 Use/toselectthedesiredlocationsetting,thenpressOK.
Initial Setup
Select “Retail” or “Home” for your location.
Retail Home
Select OK OK
• Select[Retail]store,theunitwillbesetupwithpredefinedsettingforretaildisplays.
• Select[Home],theunitissettomaximizetheenergyefficiencyforhomesettinganditcanbeadjustedthroughachoiceofpictureandsoundqualityaccordingtoyourpreference.UsethissettingtoremovetheE-Stickerifvisiblefromthedisplay. p. 23
•Whentheinitialsetupiscompleted,thelowestmemorizedchannelwiththeconfirmationmessageofthelocationsettingwillbedisplayedontheTVscreen.
• Youmustset[Home]instep4.Otherwise,[Picture]and[Sound]settingsyouadjustedwillnotbememorizedaftertheunitgoesintostandbymode.
Note• Ifyouarenotreceivingasignalfromyourcableservice,contacttheCableprovider.• Ifyoupress orMENUduringautoprogram,thissetupofTVchannelswillbecanceled.• Theinitialautoprogramfunctioncanbeexecutedforeither
[Antenna]or[Cable]onlyonce.Whenyouchangetheconnection(Antenna/Cable),set[Autoprogram]again. p. 17• Ifthereisnosignalinputfromtheantennaterminalandnooperationforseveralsecondsafteryouturnontheunit,helpfulhintsappears.FollowtheinstructionslistedontheTVscreen.
Initial Setup
No channel is registered. Try Autoprogram again? Verify that you have a cable connected to the “ANT. IN” jack on the back of the TV, the channel installation process searches this connection. If you are using a cable or satellite box, please confirm the input which you have connected to the box and press “SOURCE” key on the remote control to select the appropriate source input.
Retry
Later
Select OK OKMENU
Skip
After an initial setup is completed...• Ifyouwanttoscanthechannelsautomaticallyagain.
[Autoprogram] p. 17• Youcanaddthedesiredcableandanalogchannelsunmemorizedbyautoprogram.[Add Channels] p. 18
• Ifyouwanttochangetoanotherlanguage.[Language] p. 23
• Ifyouwanttochangethelocationsetting.[Location] p. 23
11IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
salut!hola!hi!
WATCHING TV
Sleep Timercansettheunittogointostandbymodeafteranincrementalperiodoftime.PressSLEEPrepeatedlytochangetheamountoftime(increasesthetimeby30minutesupto120minutes).
Sleep 120min.
PressSLEEPoncetocallupthedisplayforcheckingtheremainingtime.• Tocancelsleeptimer,pressSLEEPrepeatedlyuntil[Sleep Off]isdisplayed.
Switching Each Input ModecaneasilyswitchwiththeremotecontrolbetweenTV(ATSCorNTSC)andexternaldeviceswhentheyareconnectedtotheunit.PressSOURCE orCH+repeatedlytocyclethroughtheinputmodes.
Source
TVHDMI1HDMI2VideoPC
e.g.)
11.1 HDMI1 HDMI2DTV / TV channel
PC Video or Component
• PressingCH −reversesthedirectionoftheinputmodes.
* [Component]willbedisplayedifyouconnectedcomponentvideocablestothisunit.
Freeze ModecanfreezetheimageshownontheTVscreenfor5minutes.PressFREEZEtofreezetheimage.
Freeze
• Thesoundoutputwillnotbepaused.• Tocancelfreezemode,pressanybuttonsexcept .
Channel SelectionSelectchannelsbyusingCH +/−orthe Number buttons.• Toselectthememorizedchannels,useCH +/−orthe Number buttons.
• Toselectthenon-memorizedchannels,usethe Number buttons.
11.1
To use the Number buttons
ATSC
- Whenselectingdigitalchannel11.1Besuretopress•beforeenteringthesubchannelnumber.
NTSC
- Whenselectingcableoranalogchannel11
PressPREV CHtoreturntothepreviouslyviewedchannel.
Note • [No Signal]willappearontheTVscreenafterthesubchannelbroadcastisover.• [Audio only program]messagewillappearontheTVscreen,whenyoureceiveonlysoundsignal.
12
salut!hola!hi!
TV Screen Display Mode5typesofdisplaymodescanbeselectedwhenthebroadcastingstationissending16:9or4:3videosignal.And3typesofdisplaymodescanbeselectedforPCinputsignal.PressFORMATrepeatedlytoswitchtheTVaspectratio.
For 16:9 video signal Normaldisplaysa16:9pictureatitsoriginalsize.4:3displaysa16:9pictureata4:3size;thepictureisshortenedhorizontally.Sidebarsappearonbothedgesofthescreen.Movie expanddisplaysa16:9picturethatisverticallystretchedtofillthescreen.Thisonlycropsoutthetopofthepicture.Zoomdisplaysa16:9pictureatitsmaximumsizewithoutchangingitshorizontalandverticalratio.Widedisplaysahorizontallystretchedpicture.Thiscropsouttheleftandrightsidesofthepicture.
Normal
Wide
4:3 Movie expand
Zoom
For 4:3 video signal Normaldisplaysa4:3pictureatitsoriginalsize.Sidebarsappearonbothedgesofthescreen.16:9displaysa4:3pictureata16:9size;thepictureisstretchedhorizontallytofillthescreen.Movie expanddisplaysa4:3pictureata16:9size;thepictureisstretchedmoreverticallyatthetopofthescreen.Thiscropsoutthetopofthepicture.Zoomdisplaysa4:3pictureata16:9size;atitsmaximumsizethatismoreverticallystretchedtofillthescreen.Thiscropsoutthetopandbottomofthepicture.Widedisplaysthepicturewithitscenterattheoriginalsizeandtheedgesstretchedhorizontallytofillthescreen.
Normal
Wide
16:9 Movie expand
Zoom
For PC input signal Normaldisplaysaproportionatelystretchedpicture.Sidebarsappearonbothedgesofthescreen.Fulldisplaysapicturethatisstretchedoutofproportionhorizontallytofillthescreen.Unscaleddisplaysapictureinitsoriginalsize.
Normal UnscaledFull
Sound Functionsdescribehowtochangetheaudioortheaudiolanguageaswellasthevolume.
Volume Adjustment
Silence ModePressMUTEtoturnoffthesoundtemporarily.
Mute willbedisplayedforafewseconds.• PressMUTEagainorVOL +/−torecovertheoriginalvolume.
UseVOL +/−toadjustthevolume.
Volume 30
willbedisplayedforafewsecondswhenadjustingthevolume.
Switching Audio ModeATSC
PressSAPrepeatedlytocyclethroughtheavailableaudiolanguages.• Availablelanguagesdifferdependingonthebroadcast.• [Other] isdisplayedwhentheaudiolanguagecannotbeacquired,ortheacquiredlanguagesareotherthanEnglish,SpanishorFrench.
11.1English 1/3
NTSC
PressSAPtodisplaythecurrentlyselectedaudiomode.WhilereceivinganMTSbroadcast,pressrepeatedlytocyclethroughtheavailableaudiochannel.
11SAP / STEREO
e.g.)WhenallaudioareavailableSAP / STEREO SAP / MONO SAP / STEREO
STEREO :Outputsstereo-audioSAP :OutputssecondaudioprogramMONO :Outputsmono-audio
13IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
TV Screen InformationYoucandisplaythecurrentlyselectedchannelorotherinformationsuchastheaudiomodeontheTVscreen.Inthedigitalmode,thedetailedbroadcastinginformationforthecurrentofftheairchannelsuchasprogramtitleandprogramguidesaredisplayed.
1 PressINFO.ATSC
11.1
TV: TV-14
1080i1080i 16:916:9HDHD
CCCC
KABCKABC
1 2 3 4
56, 7, 8910
A Day of Memories A Day of Memories
A quarter-century ago,which may now qualify as thegood old days of newspapering,run-of-paper salesaccounted for 80 percent of the industry's advertisingrevenues.Department stores and supermarket were
English 1/2
Rating
NTSC
11
TV-PG DLSV
480i480i 4:34:3SDSD
CCCC
4
56, 7, 8910
SAP / STEREO
1 programtitle 2 programguide
(Theprogramguideaddedtobroadcastinginformationisdisplayedtoamaximumof4lines.)
3 broadcaststation 4 channelnumber 5 audiolanguage(ATSC)/audiomode(NTSC)
[Switching Audio Mode] p. 13 6 effectivescanninglinesandscanmode 7 TVformat 8 program’simageaspectratio 9 CC(notavailableifclosedcaptionissetto[Off])10 childlockrating
2 PressINFOorBACK tohidetheinformation.
Note• Whentheprogramguideconsistsofmorethan4lines,use/toscrolltothenext/previouslines.• [No description provided.]isdisplayedwhentheprogramguideisnotprovided.• Whiletheprogramguideisdisplayed,theclosedcaptionfunctionisinterrupted.• Inexternalinputmode,thefollowingscreenisdisplayed;e.g.)WhenanexternaldeviceisconnectedtoVideoInputjack.
TV-PG DLSV480i480i SDSD
CCCC
Video
• Theinformationdisplaywillautomaticallydisappearin1minute.
ECOYoucanturnonECOModetoconservepower.
Press ECO oncetoturnonECOModeandreducepowerconsumption.Press ECOagaintoturnoffECOMode.
ECO Off ECO On
On ReducespowerconsumptionOff Setsthebacklightbrighter.
Note• Youmustset[Home]in [Location]. p. 23Otherwise,thesettingsyouadjustedwillnotbesavedwhentheunitgoesintostandbymode.
fun-Link OptionsIfyouhaveourbrandproductssuchasBlu-rayplayerorDVDrecorderthatarecompatiblewithfun-Linkfunctions,connectthemtothisunitviaanHDMIcablesoyoucansimplyoperatevariousitemsfromthisunit’sremotecontrol.Before you begin:Youmustset[On]in[Device Control] and[fun-Link Control].p. 22, 23Otherwise, OPTIONS doesnotworkevenifyouconnectedourbranddevicestothisunit.
To enjoy fun-Link, verified and recommended devices are as follows;MAGNAVOX SYLVANIAMBP5230MBP2100MBP5120FMBP5130
MRD723BMRD410B
NB620SL2NB620SL1NB621SL1
1 Press OPTIONS todisplay[fun-Link Options]menu.
fun-Link Options Device-menuDevice-contentsDevice-favorite
Device-menu Thisfunctionallowsyoutocontrolthemenuofyourconnectedfun-Linkdevice.
Device-contents
ThisfunctionallowsyoutocontrolthetopmenuofyourDVDorBlu-raydiscs.
Device-favorite
Thisfunctionallowsyoutocontrolthepop-upmenuofyourBlu-raydiscs.
2 Use// OKonthisunit’sremotecontroltooperatethedesiredfunctionsforyourdevices.
Note• Someoffun-Linkfunctionsmaynotbeavailabledependingonyourfun-Linkdevicesordiscs.• Wedonotguarantee100%interoperabilitywithotherbrandsofHDMIlinkcompliantdevices.
14
USING FUNCTIONSThissectiondescribestheoverviewofthemainmenudisplayedwhenyoupressMENU.Themainmenuconsistsofthefunctionsettingitemsbelow.
PictureSoundSetupFeaturesLanguageUSB
1 PressMENUtodisplaythemainmenu.
2 Use/toselectadesiredmenuandanitem,thenpressOKtodeterminethesetting.
Picture p. 16Adjustingthepicturemode,orcustomizethepicturequalityasyourpreference.
Sound p. 16
Adjustingthesoundmode,equalizerandsomeothersoundfunctions.
Setup p. 17
Scanningthechannelsavailableinyourareaandseewhattheantennalevelsare.
Features p. 18
AdjustingtheClosedCaption,parentalguideandsomeotherusefulfunctions.
Language p. 23
YoucanchooseEnglish,Spanish,orFrenchasyouron-screenlanguage.
USB p. 24
Youcanviewpicture(JPEG)andvideo(MotionJPEG)filesstoredonaUSBstoragedevice.
3 Whenthesettingiscompleted,pressMENUtoexit.
15IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
Picture
Before you begin:Youmustset[Home]in[Location].p. 23Otherwise,thesettingsyouadjustedwillnotbememorizedaftertheunitgoesintostandbymode.
1 Use/toselecttheitemyouwanttoadjust,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Smart PictureBrightnessContrastColorTintSharpness Color TemperatureNoise Reduction
Personal 30 60 36 0 0NormalOn
2 Adjustthefollowingitems.
Smart PictureUse/toselectthedesiredsetting,thenpressOK.([Personal],[Standard],[Sports],[Movie],and[Game])
Brightness, Contrast, Color, Tint, Sharpness, Color TemperatureYoucanonlyadjustthefollowingoptionswhenyousetto[Personal]in[Smart Picture].
Use/toselectthedesiredsetting,thenpressOK.Thenuse/toadjustthesetting.
Cursor Cursor Brightness todecreasebrightness toincreasebrightnessContrast todecreasecontrast toincreasecontrast
Color todecreasecolorintensity
toincreasecolorintensity
Tint toaddred toaddgreenSharpness tosoften tosharpenColor Temperature
toselectthedesiredsetting,thenpressOK(Warm,Normal andCool)
Noise ReductionReducesthenoiseofthepicture.
Use/toselectthedesiredoption,thenpressOK.On Reducesnoiseinanimage.Off Setsnoisereductiontooff.
Note• ThisfunctionisdisabledwhenPCinputisselected.(Settingwillbeingray.)
Sound
Before you begin:Youmustset[Home]in[Location].p. 23Otherwise,thesettingsyouadjustedwillnotbememorizedaftertheunitgoesintostandbymode.
1 Use/toselecttheitemyouwanttoadjust,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Smart Sound Equalizer Virtual Surround Sound Auto Volume Leveling TV Speakers Primary MTS
Standard
OnOffOnStereo
2 Adjustthefollowingitems.
Smart SoundUse/toselectthedesiredsetting,thenpressOK.([Personal],[Standard],[Movie],[Music],and[News])
EqualizerAdjusttonalqualityforeachfrequency.
Use/toselectthespecificfrequencyanduse/toadjustthelevel,thenpressOK.
Virtual Surround SoundVirtualsurroundsoundgivesyouthestereophonicvirtualspacethroughyourexisting2-channelstereosystem.
Use/toselectthedesiredoption,thenpressOK.On Emphasizedeffect.Off Naturaleffect.
Auto Volume LevelingThisfunctionkeepsaconstantloudnessdifferentialbetweentheTVcommercialsandtheprograms.
Use/toselectthedesiredoption,thenpressOK.
On ReducesvolumedifferencesbetweentheTVcommercialsandtheprograms.
Off Removestheautovolumeleveling.
16
TV SpeakersSelecttheaudiooutputfromtheunit’sspeakers,ornot.IfyouramplifierisHDMIlinkfunctioncompatibleandconnectedbyanHDMIcabletothisunit,somesoundoperationssuchasvolumeupcanbechangedbyusingthisunit’sremotecontrol.Makesure[fun-Link Control]issetto[On]. p. 22
Use/toselectthedesiredoption,thenpressOK.On Thesoundwillbeoutputfromtheunit’sspeakers.
Off Thesoundwillnotbeoutputfromtheunit’sspeakers.
Ext. AmpYoucancontrolaudiooutputfromyourconnectedHDMIlinkdevicesbyusingthisunit'sremotecontrol.
Note• Wedonotguarantee100%interoperabilitywithotherbrandsofHDMIlinkcompliantdevices.• [Unmute]maybedisplayedontheTVscreenwhenyourecoverthevolumefromyouramplifier.
Primary MTSYoucansettheoutputmodeasadefaultforthesoundmode(NTSConly).ThissettingisnotinterlockedwhenyouchangetheoutputmodebypressingSAP. [Sound Functions]p. 13
Use/toselectthedesiredoption,thenpressOK.Stereo Outputsstereo-audio.Mono Outputsmono-audio.SAP Outputssecondaudioprogram.
Setup
Before you begin:Makesuretheunitisconnectedtoantennaorcable.
1 Use/toselecttheitemyouwanttoadjust,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
AutoprogramChannel ListAdd ChannelsAntenna
2 Adjustthefollowingitems.
AutoprogramIfyouswitchwires(e.g.betweenantennaandCATV)orifyoumovetheunittoadifferentareaaftertheinitialsetting,orifyourestoretheDTVchannelsyoudeleted,itisrecommendedtouseAutoprogramtoperformanewchannelsearch.
1 Use/toselect[Autoprogram],thenpressOK.
2 Use/toselectanappropriateoption,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Autoprogram will rescan all channels. Auto programming may take more than 20 minutes to complete. Select your signal source.
BackAntennaCable
Antenna
Cable OrANT.IN
•WhenconnectedtoVHF/UHFantenna,select[Antenna].•WhenconnectedtoCATV,select[Cable].• [Autoprogram]willbegin.
Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete.
75%
Digital channels 10 ch
Analog channels 6 ch
MENU Exit
•Whenthescanningandmemorizingarecompleted,thelowestmemorizedchannelwillbedisplayed.
Note• Aftersetting[Autoprogram],usingCH+ / − ontheremotecontrolskipsunavailableprogramsautomatically.• Ifyouarenotreceivingasignalfromyourcableservice,contacttheCableprovider.• Ifyoupress orMENUduringautoprogram,thesetupofTVchannelswillbecanceled.• Evenif[Autoprogram]iscompleted,thechannelsettingwillbelostiftheACpowercordisunpluggedbeforetheunitgoesintostandbymodebypressing .• ThePINcodewillberequiredonceyousetaPINcodeinthe
[Child Lock].p. 22• IfyouwanttochangeyourPINcode,followtheinstructionof
[Change PIN].p. 21
17IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
Channel ListThechannelsselectedherecanbeskippedwhenselectingthechannelsusingCH + / −.Thosechannelscanstillbeselectedwiththe Number buttons.
1 Use/toselect[Channel List],thenpressOK.
2 Use/toselectthechannelyouwanttoremove,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Highlight channels for Ch Up / Down key selection.
DTV 11.1DTV 11.2DTV 11.3
Ch Select OK Watch / SkipBACK
Back
• Thechanneldisplayfortheremovedchanneldarkens.YouwillnotbeabletoselectthechannelagainusingCH + / −.
• Toreactivatearemovedchannel,use/andpressOK.Theregisteredchannelsarehighlighted.
•Whenyouremoveamainchannel,itssubchannelsareremovedaswell.
Note• Thechannelwiththe[DTV]indicatedonthedisplayisATSC.OtherwisethechannelisNTSC.
Add ChannelsThisfunctionletsyouaddtheofftheairalongNTSCoranalogCablechannelsthatwerenotaddedbytheautoprogramduetoreceptionconditionsattheinitialsetting.
1 Use/toselect[Add Channels],thenpressOK.
2 Usethe Number buttonstoenterthenumberofthechannelyouwanttoadd,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
For analog channels, select a channel to be added using number keys.For digital channels, you must perform Autoprogram function.
Add channels
Ch ChangeBACK
Back
11
Note• Ifsetupcompletessuccessfully,[Added to the channel list.]isdisplayed.• Ifexternalinputisused,itisnotpossibletoregisterthechanneland[Unavailable]willbedisplayedontheTVscreen.• ByusingCH+ / −,youcanselectthememorizedchannelsonly.
Antenna ConfirmationATSC
Thisfunctionletsyoucheckthedigitalsignalstrengthofeachchannel.
1 Use/toselect[Antenna],thenpressOK.
2 Usethe Number buttonsorCH + / − toselectthechannelforwhichyouwanttocheckthedigitalsignalstrength.
11.1
PictureSoundSetupFeaturesLanguageUSB
Current 50 Max 50
Back
Ch Change
Note• Ifthechannelissettoanalogchannelorexternalinput,youcannotconfirmtheantennacondition.
Features
1 Use/toselecttheitemyouwanttoadjust,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Closed CaptionChild LockECOPC Settingsfun-Link (HDMI CEC) LocationE-StickerCurrent Software Info
On
Home- -
2 Adjustthefollowingitems.
18
Closed CaptionYoucanviewclosedcaptioning(CC)forTVprograms,moviesandnews.Closedcaptionreferstotextofdialogordescriptionsdisplayedon-screen.
Use/toselect[Closed Caption],thenpressOK.Seethefollowingdescriptionforsettingeachitem.
PictureSoundSetupFeaturesLanguageUSB
Caption ServiceDigital Caption ServiceCaption Style
OnOn
ABC
A. Caption Service 1 Use/toselect[Caption Service],thenpressOK.
2 Use/toselectthedesiredclosedcaption,thenpressOK.
Off Selectifyoudonotwantcaptionservice.
CC-1 and T-1
Theprimarycaptionandtextservices.Thecaptioningortextisdisplayedinthesamelanguageastheprogram’sdialog(upto4linesofscriptontheTVscreen,whereitdoesnotobstructrelevantpartsofthepicture).
CC-3 and T-3Serveasthepreferreddatachannels.Thecaptioningortextisoftenasecondarylanguage.
CC-2, CC-4, T-2 and T-4
Rarelyavailableandbroadcastersusethemonlyinspecialconditions,suchaswhen[CC-1]and[CC-3]or[T-1]and[T-3]arenotavailable.
• Thereare3displaymodesaccordingtoprograms:Paint-on mode
DisplaysinputcharactersontheTVscreenimmediately.
Pop-on mode Oncecharactersarestoredinmemory,theyaredisplayedallatonce.
Roll-up mode Displaysthecharacterscontinuouslybyscrolling(max.4lines).
B. Digital Caption Service ATSC
Inadditiontothebasicclosedcaption,DTVhasitsownclosedcaptioncalleddigitalcaptionservice.Usethismenutochangethesettingsfordigitalcaptionservice.
1 Use/toselect[Digital Caption Service],thenpressOK.
2 Use/toselectthedesireddigitalcaptionservice,thenpressOK.
Off Selectifyoudonotwantdigitalcaptionservice.
CS-1 to CS-6Selectoneofthesebeforechanginganyotheritemin[Closed Caption]menu.Choose[CS-1]undernormalcircumstances.
Note• [Digital Caption Service]thatyoucanswitchdiffersdependingonthebroadcastdescription.
C. Caption Style ATSC
Youcanchangethecaptionstylesuchasfont,colororsize,etc.
1 Use/toselect[Caption Style],thenpressOK.
2 Use/toselect[User Setting],thenpressOK.
3 Use/toselect[On],thenpressOK.
4 Use/toselectanitem,thenpressOK.Thenuse/toselectthedesiredsettingandpressOK.
S o, you must be Phil ip. H i!I ’m pleased to meet you.
S o, you must be Phil ip. H i!I ’m pleased to meet you.
Background( Background Color and Background Opacity or Transparency)
Picture display
Edge(Edge Color and Edge Type)
Font( Font Style, Font Size, Font Color and Font Opacity or Transparency)
• Reviewyoursettingchoicemadebelowbylookingintheupperrightcornerofthedisplayedsettingbox(notallselectionsshowthedifferencesselected).
Font
Font Style
Closedcaptioningfontstyle,size,colorandopacitycanbechanged.
Font SizeFont ColorFont Opacity
Background
Background Color Backgroundcolorandopacityofthe
displayedcaptioncanbeswitched.Background Opacity
EdgeEdge Color Edgecolorandtypeofthedisplayed
captioncanbeswitched.Edge Type
19IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
Note•• Closed•caption•will•not•be•displayed•when•you•are•using•an•HDMI•connection.•• To•show•the•closed•caption•on•your•TV•screen,•broadcast•signal•must•contain•the•closed•caption•data.•• Not•all•TV•programs•and•commercials•have•the•closed•caption•or•all•types•of•the•closed•caption.•• Captions•and•texts•may•not•exactly•match•the•TV•voice.•• Changing•channels•may•delay•the•closed•caption•for•a•few•seconds.•• Adjusting•or•muting•the•volume•may•delay•the•closed•caption•for•a•few•seconds.•• Abbreviations,•symbols•and•other•grammatical•shortcuts•may•be•used•in•order•to•keep•pace•with•the•on-screen•action.•This•is•not•a•malfunction.•• The•caption•or•text•characters•will•not•be•displayed•while•the•main•menu•or•functions•display•is•shown.•• If•a•black•box•appears•on•the•TV•screen,•this•means•that•the•closed•caption•is•set•to•the•text•mode.•To•clear•the•box,•select•[CC-1],•[CC-2],•[CC-3],•[CC-4]•or•[Off].•• If•the•unit•receives•poor•quality•television•signals,•the•captions•may•contain•errors,•or•there•might•be•no•captions•at•all.•Some•possible•causes•of•poor•quality•signals•are:•-•Automobile•ignition•noise•-•Electric•motor•noise•-•Weak•signal•reception•-•Multiplex•signal•reception•(ghosts•or•screen•flutter)•-•Data•dropout•and•Pixelation•(for•DTV•only)•• The•unit•retains•the•closed•caption•setting•if•the•power•fails.•• When•the•unit•receives•special•effects•playback•signal•(e.g.•Search,•Slow•and•Still)•from•a•VCR’s•video•output•channel•(ch3•or•ch4),•the•unit•may•not•display•the•correct•caption•or•text.•• The•EUT•setting•that•satisfies•§•79.102•(e)•is•as•follows:•Font:•Mono-font•Character•size:•Large
Child LockChild•lock•reads•the•ratings•for•programs,•then•denies•access•to•the•programs•which•exceed•the•rating•level•you•set.•With•this•function,•you•can•block•certain•programs•inappropriate•for•children•and•any•channels•or•external•input•modes•can•be•invisible.
1• Use•/•to•select•[Child Lock],•then•press•OK.
PictureSoundSetupFeaturesLanguageUSB
Closed CaptionChild LockECOPC settingsfun-Link (HDMI CEC) •LocationE-StickerCurrent Software Info
On
Home •- -
2• Use the Number buttons•to•enter•the•4-digit•numbers•for•your•PIN•code.
FeaturesLanguage
_Enter PIN.
••When•you•have•not•set•up•your•PIN•code,••enter•0,•0,•0,•0.
••When•the•PIN•code•is•correct,•[Child Lock]•menu•is•displayed.
See•the•following•description•for•setting•each•item.
PictureSoundSetupFeaturesLanguageUSB
Channel LockUS Movie Ratings LockUS TV Ratings LockCanadian English RatingCanadian French RatingRegion Ratings LockClear region ratings lockChange PIN
ABC
D
Note•• When•you•select•a•rating•and•set•it•to•[Block],•the•higher•ratings•will•be•blocked•automatically.•The•lower•ratings•will•be•available•for•viewing.•• When•you•set•the•highest•rating•to•[View],•all•ratings•turn•to•
[View]•automatically.•• To•block•any•inappropriate•programs,•set•your•limits•in•[US Movie
Ratings Lock],•[US TV Ratings Lock]•and•[Region Ratings Lock].•• The•child•lock•setting•will•be•retained•after•a•power•failure•or•after•the•power•is•removed•for•longer•than•10•seconds•(except•the•PIN•code•reverts•to•0000).••[Child Lock]••p. 20•• If•the•rating•is•blocked,• •will•appear.•• [Region Ratings Lock]•will•be•available•when•the•unit•receives•a•digital•broadcast•using•the•new•rating•system.•• For•the•United•States,•the•unit•may•download•the•Region•Ratings•Lock•Table,•if•required.•• The•Canadian•rating•systems•on•this•unit•are•based•on•CEA-766-A•and•CRTC•policy.
A. Channel Lock •Particular•channels•or•external•input•modes•can•be•invisible•in•this•function.
1• Use•/•to•select•[Channel Lock],•then•press•OK.
2• Use•/•to•select•the•desired•rating,•then•press•OK•repeatedly•to•switch•between•[View]•and•[Block].
PictureSoundSetupFeaturesLanguageUSB
HDMI1 HDMI2VideoPC40.1 DTV40.2 DTV
Select OK View / BlockBACK
Back
* [Component]•will•be•displayed•if•you•connected•component•video•cables•to•this•unit.
B. Setting US Movie ratingsUS•Movie•ratings•lock•is•the•rating•system•created•by•MPAA.
1• Use•/•to•select•[US Movie Ratings Lock],•then•press•OK.
2• Use•/•to•select•the•desired•rating,•then•press•OK•repeatedly•to•switch•between•[View]•and•[Block].
20
PictureSoundSetupFeaturesLanguageUSB
XNC-17RPG-13PGGNR
Select OK View / BlockBACK
Back
Rating CategoryX MatureaudienceonlyNC-17 Nooneunder17admitted
R Restricted;under17requiresaccompanyingparentoradultguardian
PG-13 Unsuitableforchildrenunder13PG ParentalguidancesuggestedG GeneralaudienceNR Norating
C. Setting TV ratings
1 Use/toselect[US TV Ratings Lock],thenpressOK.
2 Use/ / /toselectthedesiredrating,thenpressOKrepeatedlytoswitchbetween[View]and[Block].
PictureSoundSetupFeaturesLanguageUSB
FV V S L DTV-MATV-14TV-PGTV-GTV-Y7TV-Y
Select OK View / BlockBACK
Back
Rating CategoryTV-MA Matureaudienceonly higherTV-14 Unsuitableforchildrenunder14TV-PG ParentalguidancesuggestedTV-G Generalaudience
TV-Y7 Appropriateforallchildren7andolder
TV-Y Appropriateforallchildren lower
To set the sub ratingsAsforTV-MA,TV-14,TV-PG,orTV-Y7,youcanfurthersetthesubratingstoblockspecificelementsofprogramming.Tosetthesubratings,followthestepbelow.
Use/ / /toselectthedesiredrating,thenpressOKrepeatedlytoswitchbetween[View]and[Block].
PictureSoundSetupFeaturesLanguageUSB
FV V S L DTV-MATV-14TV-PGTV-GTV-Y7TV-Y
Select OK View / BlockBACK
Back
Sub Rating Category RatingFV FantasyViolence TV-Y7V Violence TV-MA
TV-14TV-PG
S SexualSituationL CoarseLanguageD SuggestiveDialog TV-14,TV-PG
Note• Blockedsubratingwillappearbesidethemainratingcategoryin
[US TV Ratings Lock]menu.• Youcannotblockasubrating(D,L,SorV)ifthemainratingissetto[View].• Changingthecategoryto[Block]or[View]automaticallychangesallitssubratingstothesame([Block]or[View]).
D. Change PINAlthoughthedefaultPINcode(0000)issuppliedwiththeunit,youcansetyourownPINcode.
1 Use/toselect[Change PIN],thenpressOK.
2 Press the Number buttonstoenterthenew4-digitPINcode.• EnterPINcodeagainin[Confirm PIN.]entryfield.
PictureSoundSetupFeaturesLanguageUSB
_Enter PIN.
Confirm PIN.
PIN Code BACK Back
Note• MakesurenewPINcodeandconfirmPINcodemustbeexactlythesame.Iftheyaredifferent,thespaceisclearedforreentering.• YourPINcodewillbeerasedandreturnstothedefaultPINcode(0000)whenapowerfailureoccurs.• IfyouforgetthePINcode,unplugtheACpowercordthenwaitfor10secondstoplugtheACpowercordinagain.TheunitwillrestorethePINcodeto0000asthefactorydefault.
21IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
ECOYoucanturnonECOModetoconservepower.
1 Use/toselect[ECO],thenpressOK.
2 Use/toselectthedesiredmode,thenpressOK.On ReducespowerconsumptionOff Setsthebacklightbrighter.
Note• Youmustset[Home]in [Location]. p. 23Otherwise,thesettingsyouadjustedwillnotbesavedwhentheunitgoesintostandbymode.• YoucanalsopressECOdirectlytoswitchthedesiredsetting. p. 22
PC SettingsThisfunctionletsyouadjustthePCscreenposition,clockandphaseduringPCinput.
1 Use/toselect[PC Settings],thenpressOK.
2 Use/toselectthesettingyouwanttoadjust,thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Auto Adjustment
Horizontal PositionVertical PositionClockPhase
0 0 0 0
3 Adjustthefollowingitems.
Auto AdjustmentUse/toselect[Adjust],thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
To automatically synchronize the phase and clock on the TV and PC.
CancelAdjust
• Thehorizontal/verticalposition,clockandphaseofthePCscreenareautomaticallyadjusted.
Horizontal Position, Vertical PositionUse/toadjust.
Cursor Cursor Horizontal Position tomovePCscreenleft tomovePCscreenright
Vertical Position
tomovePCscreendown tomovePCscreenup
Clock, PhaseUse/toadjust[Clock]settingtostabilizethePCscreenand[Phase]settingtoimprovetheclarityofthePCscreen.
Cursor Cursor Clock todecreasesetting
valuetoincreasesettingvaluePhase
Note• Youmaynotobtainanappropriatescreenwith
[Auto Adjustment]forsomesignals.Inthiscase,adjustthesettingsmanually.• Adjust[Phase]settingafter[Clock]settinghasbeenproperlyadjusted.
fun-Link (HDMI CEC)Thisfunctionallowsyoutooperatethelinkedfunctionsbetweenourbranddeviceswithafun-LinkfeatureandthisunitconnectingthroughanHDMIcable.
1 Use/toselect[fun-Link (HDMI CEC)],thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
fun-Link ControlAuto Device OffAuto TV OnDevice ControlDevice List
OnOnOnOn
2 Use/toselectthedesiredsetting,thenpressOK.
3 Adjustthefollowingitems.
fun-Link ControlSetthefun-Link[On]or[Off].
Thefollowingadditionalsettingswillbegrayedoutwhenyousetto[Off].
Use/toselectthedesiredsetting,thenpressOK.
On Selectsifyouhaveconnectedanexternaldevicethatiscompatiblewiththefun-Linkfunction.
Off Disablesallfun-Link.
Auto Device OffYoucansetyourdevicetoturnoffbyinterlockingfromthisunit’spower.
Use/toselectthedesiredsetting,thenpressOK.
OnYourconnectedfun-Linkdeviceturnsoffautomaticallywhentheunitgoesintostandbymode.
Off Yourconnectedfun-Linkdevicestaysoneveniftheunitgoesintostandbymode.
22
Auto TV OnThisunitwillturnonwhenthepoweronsignalissentfromyourconnectedfun-Linkdevice.
Use/toselectthedesiredsetting,thenpressOK.
On Thisunitturnsonautomaticallywhenyouturnonyourconnectedfun-Linkdevice.
Off Thisunitstaysinstandbymodeevenifyouturnonyourconnectedfun-Linkdevice.
Device ControlYoucanoperatesomefunctionssuchasdiscplaybackorcallupthemenuoftheconnecteddevices,byusingthisunit’sremotecontrol.
Use/toselectthedesiredsetting,thenpressOK.
On
PLAYB/STOP C/FWDD/REVE/SKIP G/SKIPH/PAUSE F/ OPTIONS /////OK/BACK /the Number buttons/RED/GREEN/BLUE/YELLOWcanbeusedtocontrolyourconnectedfun-Linkdevicesbythisunit’sremotecontrol.
Off Disablesthedevicecontrol.
Device ListThisfunctionletsyouseetheproductmodelnumberornameofconnecteddevices.
PictureSoundSetupFeaturesLanguageUSB
HDMI1 NB620SL2
HDMI2 MBP5230
OK RefreshBACK
Back
LocationYoumustset[Home]inthissetting.Otherwise,[Picture]and[Sound]settingsyouadjustedwillnotbememorizedafteryouturnofftheunit.
1 Use/toselect[Location],thenpressOK.
2 Use/toselectthedesiredlocation,thenpressOK.
RetailTheunitwillbesetupwithpredefinedsettingsforretaildisplays.Inthissetting,youcansetthebacklightbrighter.
HomeTheunitissettomaximizetheenergyefficiencyforhomesettinganditcanbeadjustedthroughachoiceofpictureandsoundqualityaccordingtoyourpreference.
E-StickerWhenyouselect[Location] to[Retail]store,E-Sticker(ElectronicSticker)isdisplayed.E-StickercanbeturnedOffusingprocedurebelow.
1 Use/toselect[E-Sticker],thenpressOK.
2 Use/toselect[Off],thenpressOK.Off YoucanturnoffE-Sticker.Top E-StickerisdisplayedontopoftheTVscreen.Bottom E-StickerisdisplayedonbottomoftheTVscreen.
Note• Ifyouselect[Home],E-Stickerwillnotbedisplayed.
Current Software InfoThisfunctionshowswhatversionofthesoftwarecurrentlyused.
1 Use/toselect[Current Software Info],thenpressOK.
2 Confirmtheversionofthesoftwarecurrentlyused.
PictureSoundSetupFeaturesLanguageUSB
Release Version:XXXXXXX_XX_XX_XXXX_XX
Back
Language
Use/toselect[English], [Español]or[Français],thenpressOK.
PictureSoundSetupFeaturesLanguageUSB
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
English
Español
Français
Note• IfyouneedtheEnglishmenusinsteadoftheSpanishorFrenchmenus,pressMENU.Use/toselect[Idioma]or[Langue],thenpressOK.Use/toselect[English],thenpressOK.PressMENUtoexitthemainmenu.
23IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
USB
Thisunitcanplaypicture(JPEG)andvideo(MotionJPEG)files.UsetheUSBstoragedevicethatcontainsthosefiles.
1 InserttheUSBstoragedeviceintotheUSBterminalonthisunit.Themainmenuappearsautomatically.
2 Use/toselect[USB]andpressOK.ThehighlightedtextwillmovetothenameofyourUSBstoragedevice,thenpressOKagain.
PictureSoundSetupFeaturesLanguageUSB
This menu allows you to enjoy your pictures and videos via your USB device.
Your USB
3 Use/toselect[Picture]or [Video] andthenpressOK.
Picture (JPEG)1 Use/toselectthedesiredfile,andthenpressOK.
4321
Your USB Picture
Picture Image1.jpg Image1.jpg
Image2.jpg Image3.jpg Image4.jpg Image5.jpg
Image1.jpg1200:9002009:04:02 17:42:06
ThumbnailsPress “OK” key to play/pause.
• Totogglebetween[List]and[Thumbnails]pressthe Number 2 buttoneachtime.
• Theunitgoestotheslideshowautomatically.Topause/playtheslideshow,pressOK.
• Usethe Number buttons(1through4)toseethefiledetail(➀)orchangethefollowingsettings(➁~➃).Seethedescriptiononthetopofthenextcolumn.
Item Detail
➀ More Detail
Press1todisplayfiledetailsbelow.[Name],[Album],[Date],[Size]and[Next].Press1 againtoremovefiledetails.
➃ Start show
Press4orOKtostarttheslideshow.Whiletheslideshowison,thefollowing2settingswillbedisplayed.
➁ Transitions
Press2,thenuse/toselectthetransitionmodechoosingfrom;[None],[Dissolve],[Wipe right],[Wipe left],[Wipe up],[Wipe down],[Box in]and[Box out].
➂ Slide time
Press3,thenuse/tochangethedisplaytimechoosingfrom;[Short],[Medium]and[Long].
➃ Stop show
Press4orOKtostoptheslideshow.Whiletheslideshowisoff,thefollowing2settingswillbedisplayed.
➁ Rotate
Everypresson2willturnthepictureclockwiseby90degrees.
➂ Zoom
Press3,thenuse/toselectthezoomfactor(1x,2xor4x).PressOKtosetthezoomfactor.
Video (Motion JPEG)1 Use/toselectthedesiredfile,andthenpressOK.
4321
Your USB Video
Video MOVIE1.avi MOVIE1.avi Title: MOVIE1.avi
Director:Date: 2009/04/02Duration: 00:06:37
MOVIE2.avi MOVIE3.avi MOVIE4.avi MOVIE5.avi
Supported format: motion jpeg, 320 x 240, 30FPS
• Tostopplaybackandreturntothefilelist,pressBACK ,OKorCH +.
• PressCH −toplaybackfromthebeginning.
Item Detail
➀ More Detail
Press1todisplayfiledetailsbelow.[Title],[Director],[Date]and[Duration].Press1againtoremovefiledetails.
24
Note • The unit recognizes only a USB storage device. • Do not use a USB hub or an extension cable to connect an
external hard disk drive to the unit. (Not supported.) • A USB storage device is always inserted to this unit directly. • A USB storage device is not supplied with this unit. • We do not guarantee that all USB storage devices can be
supported by this unit. • Be sure to keep a backup copy of the original files on your device
before you play them back on this unit. We have no responsibilities for damage or loss of your stored data.
• To protect your USB storage device files from being erased place the write protect sliding tab in the protect position.
• When you are ready to remove a USB storage device, at first turn the unit off so it will go into standby mode to avoid any damage to your data and the unit.
• A USB storage device that requires its own driver or the device with a special system such as fingerprint recognition are not supported.
• This unit is not allowed to use the USB storage device which requires an external power supply (500mA or more).
• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported. • Up to 10,000 files or 1,000 folders with 19 hierarchies can be
recognized. • Up to 255 English characters can be recognized. • This unit does not support MTP(Media Transfer Protocol). • This unit supports FAT16 and FAT32 file systems. • If the file is not supported, an error message appears. • When the USB storage device is not recognized, try reconnecting
it again. • Motion JPEG file with an extension of “.avi” can only be
recognized. An extension of “.mov” is not supported. • This unit doesn’t support “pause”, “forward” or “reverse” during
video (Motion JPEG) playback.
The files recorded under the following specifications are required.<Picture (JPEG)> • Upper limit : 24 Megapixel
<Video (Motion JPEG)>Video • Size : 320 x 240 (QVGA)
• Frame rate : 30 fpsAudio • LPCM - Sampling frequency
(32 kHz, 44.1 kHz or 48 kHz)- Quantization bit rate (16 bit)
CONNECTING DEVICES
No supplied cables are used with these connections: • Please purchase the necessary cables at your local store.
Before you connect:Be sure other device is connected properly before plugging in the AC power cord.
External Device Connection
HDMI ConnectionHDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition digital video and multi-channel digital audio through a single cable.
HDMI OUT
CHAPTER 15REPEAT A-B
TITLE 5
Blu-ray / DVD recorder with the HDMI output jack
HDMI cable
HDMI-DVI ConnectionThis unit can be connected to your device that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires audio cable for Analog Audio signal as well.
STEREOPCM
DVI OUT AUDIO OUTRL
cable receiver or satellite box with the DVI output jack
HDMI-DVI conversion cable
audio cables
To HDMI 1 Input jack only
25IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CO
NNECTING DEVICESIN
FORM
ATION
English
Note• UseanHDMIcablewiththeHDMIlogo(acertifiedHDMIcable).HighSpeedHDMIcableisrecommendedforthebettercompatibility.
For HDMI connection (use HDMI 1 or 2 Input jack)• Theunitaccepts480i,480p,720p,1080iand1080p24/30/60Hzofvideosignals,and32kHz,44.1kHzand48kHzofaudiosignals.• Thisunitaccepts5.1channelaudiosignal(DolbyDigital)and2channelaudiosignal(LPCM).• ThisunitacceptsonlysignalsincompliancewithEIA861.
For HDMI-DVI connection• Theunitaccepts480i,480p,720p,1080iand1080pvideosignals.• HDMI-DVIconnectionrequiresseparateaudioconnectionsaswellandtheaudiosignalsareconvertedfromdigitaltoanalog.• DVIdoesnotdisplay480iimagewhichisnotincompliancewithEIA/CEA-861/861B.
Component Video ConnectionComponentVideoconnectionoffersbetterpicturequalityforvideodevicesconnectedtotheunit.Ifyouconnecttotheunit’sComponentVideoInputjacks,connectAnalogAudiocablestotheAnalogAudioL/RInputjacksrightbelowtheComponentVideoconnectorjacks.
CHAPTER 15REPEAT A-B
TITLE 5
COMPONENT VIDEO OUTPr/CrPb/CbY
AUDIO OUTRL
(red)(blue)(green)
Blu-ray / DVD recorder with the component video output jacks
audio cables
component video cables (red / blue / green)
Note• Theunitaccepts480i/480p/720pand1080iofvideosignalsforthisconnection.
Composite Video ConnectionCompositeVideoconnectionoffersstandardpicturequalityforvideodevicesconnectedtotheunit.Ifyouconnecttotheunit’sCompositeVideoInputjack(VIDEO),connectaudiocablestotheAudioL/RInputjacksbelowtheCompositeVideoconnectorjack.WhentheAudioismonaural,thenonlyconnecttotheAudioLInputjack.
STEREOSTAND-BY
AUDIO OUTRL
VIDEOOUT
audio cables
video cable
camcorder video game
VCR
Note• WheneveryouconnecttotheCompositeVideoInputjack(VIDEO),youmustdisconnecttheComponentVideoInputjacks(PbandPr).Ifyouleavethosejacksconnected,itmaycauseofunstablepicture.
Digital Audio Output Connection(fordigitalbroadcastingonly)Ifyouconnectthisunittoanexternaldigitalaudiodevice,youcanenjoymulti-channelaudiolike5.1chdigitalbroadcastingsound.Useadigitalaudiocoaxialcabletoconnecttheunittoexternaldigitalaudiodevices.
DIGITAL AUDIO COAXIAL IN
Dolby Digital decoder
digital audio coaxial cable
26
PC ConnectionThisunitisequippedwithaPCinputjack.IfyouconnectthisunittoyourPC,youcanusethisunitasaPCmonitor.UseaVGAcableforthisVideoconnectionanditrequiresastereominiplugconversioncableforAnalogAudiosignalaswell.
mini audio cable
VGA cable
VGA cable should be with ferrite core.
personal computer
audio cables
Thefollowingvideosignalscanbedisplayed:
Format Resolution Refresh rateVGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA1,280 x 768
1,360 x 768
Otherformatsornon-standardsignalswillnotbedisplayedcorrectly.
Note• PleasepurchasetheVGAcablethathasaferritecore.• Thefollowingoperationsmayreducenoise.-AttachaferritecoretotheACpowercordofyourPC.-UnplugtheACpowercordandusethebuilt-inbatteryofyourPC.
USB Storage DeviceThisunitofferseasyplaybackofpicture(JPEG)andvideo(MotionJPEG)files.InserttheUSBstoragedeviceintotheUSBterminalshownbelow.[USB] p. 24
27IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CO
NNECTING DEVICESIN
FORM
ATION
English
USEFUL TIPS
FAQQuestion Answer
My remote control does not work.What should I do?
• Checktheantennaorcableconnectiontothemainunit.• Checkthebatteriesoftheremotecontrol.• Checkifthereisanobstaclebetweentheinfraredsensorwindowandtheremotecontrol.• Testthesignaloutputuse[IR Signal Check].p. 30
Ifokay,thenpossibleinfraredsensortrouble.• Aimtheremotecontroldirectlyattheinfraredsensorwindowonthefrontoftheunit.• Reducethedistancetotheunit.• Re-insertthebatterieswiththeirpolarities(+/–signs)asindicated.• Whenthereisaninfrared-equippeddevicesuchasPCnearthisunit,itmayinterrupttheremote
controlsignalofthisunit.• Movetheinfrared-equippeddeviceawayfromthisunit,changetheangleoftheinfraredsensoror
turnofftheinfraredcommunicationfunction.
How come the Initial setup appears every time I turn on this unit?
• ConnecttheRFcoaxialcabletotheunitdirectlyandruntheinitialsetup.• Makesuretocompletethechannelscanbeforetheunitgoesintostandbymode.
Why can I not watch some RF signal TV programs.
• Makesure[Autoprogram]hasbeencompleted.p. 17• Autoprogrammustbecompletedwhenyousetuptheunitforthefirsttimeormoveittoalocation
wherepreviouslyunavailablechannelsarebroadcast.• Theselectedchannelmaynotbebroadcasting.• When[Autoprogram]isinterruptedandnotcompleted,somechannelswillnotbereceived.Make
suretocompletetheAutoprogram.p. 17• Theselectedchannelcannotbeviewedbythe[Child Lock]setting.p. 20• Theunitrequiressomekindofantennainput.Anindoorantenna(VHF/UHF),anexternalantenna
(VHF/UHF)oranRFcoaxialcablefromyourwallcable/satelliteboxneedstobepluggedintotheunit.
How come there is no image from the connected external devices?
• CheckifthecorrectinputmodeisselectedbypressingSOURCEorusingCH + / −.[Switching Each Input Mode]p. 12
• Checktheantennaorcableconnectiontotheunit.• WhenusingtheComponentVideoConnectioncheckthattheGreen(Y),Blue(Pb/Cb)andRed(Pr/
Cr)connectorsareconnectedtotheircorrespondingcoloredjacksontheunit.
When I enter a channel number, it changes automatically.
• Manydigitalchannelshavealternatechannelnumbers.Theunitchangesthenumbersautomaticallytotheonessignifyingthebroadcastingstationchannelnumber.Thesebasicnumbersusedforpreviousanalogbroadcasts.(e.g.,inputch#30autochangestoch#6.1)
Why are captions not displayed entirely? Or, captions are delayed behind the dialog.
• Captionsthataredelayedafewsecondsbehindtheactualdialogarecommonforlivebroadcasts.Mostcaptioningproductioncompaniescandisplayadialogtomaximumof220wordsperminute.Ifadialogexceedsthatrate,selectiveeditingisusedtoinsurethatthecaptionsremainup-todatewiththecurrentTVscreendialog.
How can I set the clock ? • Thereisnoclockfunctiononthisunit.
I cannot change the [Child Lock] setting because my PIN code no longer works.
• IfaPowerfailureoccursforlongerthan10secondsthechildlocksettingisretained,butthePINcodeissettothedefaultcode“0000”.[Child Lock]p. 20
Troubleshooting GuideIftheunitdoesnotperformproperlywhenoperatedasinstructedinthismanual,check the following chart and all connections once before calling for service.
Symptom Remedy
Nopower
• MakesuretheACpowercordispluggedin.• MakesurethattheACoutletsuppliesthepropervoltage,pluganotherelectricalapplianceintothe
ACoutlettoensurethatACoutletoperatesnormally.• Ifapowerfailureoccurs,unplugtheACpowercordfor1minutetoallowtheunittoresetitself.
Controlbutton'sdonotwork. • Pressonlyonebuttonatatime.DoNOTpressmorethanonebuttonatthesametime.• Ensurethatnobuttonsontheremotecontrolaredepressedandmovefreely.
PowerisONbutnoscreenimage.
• Checkwhethertheconnectionoftheantenna,cablereceiverorsatelliteboxisconnectedcorrectly.• Checkwhetherallthecablestotheunitareconnectedtothecorrectoutputjackofyourdevicelike
Blu-ray/DVDrecorder.• Makesurethattheselectedinputmodeisconnectedtotheworkinginputjack.• CheckifyourcomputerisNOTinsleepmodewhentheinputmodeofthisunitisinPCmode.Tap
anykeyonthekeyboardtowakeupyourcomputer.
28
Symptom Remedy
Nopictureorsound
• Checkifthepowerison.• Checkifthecorrectinputmodeisselected.• Checkwhetherallthecablestotheunitareconnectedtothecorrectoutputjackofyourdevicelike
Blu-ray/DVDrecorder.• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstationorweaksignal
strength.• UnplugtheACpowercordandwaitforabout1minute,thenplugtheACpowercordandturnon
theunitagain.• Checkwhethertheconnectionoftheantenna,cablereceiverorsatelliteboxisconnectedcorrectly.• Makesurethattheselectedinputmodeisconnectedtotheworkinginputjack.• CheckifyourcomputerisNOTinsleepmodewhentheinputmodeofthisunitisinPCmode.Tap
anykeyonthekeyboardtowakeupyourcomputer.• Makesurethatthesoundisnotmuted.PressMUTE sothatthevolumebarandcurrentvolumelevel
willappearontheTVscreen.• MakesurethatthevolumeisNOTsetto[0]or[Mute].Ifso,useVOL + / −toadjustthedesired
volume.
Nocolor• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstationorweaksignal
strength.• Adjust[Color]inthemainmenu.
Adjusted[Picture]or[Sound]settingsarenoteffectiveeverytimetheunitisturnedon.
• Youmustset[Home]in[Location]. p. 23Otherwise,thesettingsyouadjustedwillnotbememorizedaftertheunitgoesintostandbymode.
SoundOK,picturepoor
• Electricalinterferencefromnearbyappliancesmayaffectpicturequality.• Adjust[Contrast]and[Brightness]inthemainmenu.• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstationorweaksignal
strength.• Forthebestpicturequality,watch"High Definition"widescreenprograms.
IftheHDcontentisnotavailable,watch"Standard Definition"programsinstead.
PictureOK,soundpoor• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstationorweaksignal
strength.• Checkiftheaudiocableisconnectedincorrectly.
Youseeadistortedpictureorhearanunusualsound.
• Youmaybegettinginterferencefromelectricalappliances,automobiles,motorcyclesorfluorescentlights.
• Trymovingtheunittoanotherlocationtoseeifthisisthecauseoftheproblem.
Ghosts,linesorstreaksinpicture• Electricalinterferencefromnearbyappliancesmayaffectpicturequality.• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstationorweaksignal
strength.
Yousee"noise"or"trash"onthescreen.
• Whenthecapabilitiesoftheunitexceedthecapabilitiesofthedigitalbroadcasting,thesignalwillbeincreasedtomatchthecapabilitiesofthedisplayoftheunit.Thismaycausenoiseortrash.
DifferentcolormarksontheTVscreen
• ViewotherTVchannels.Theproblemmightbelimitedtothebroadcastingstation,missingdataorpixelation.
Youswitchtoadifferentinputandthevolumechanges.
• Thisunitwillmemorizethevolumelevelfromthelasttimeyouadjustedit.• Ifthevolumeofthesoundfromanotherdeviceishigherorlower,thentheloudnesswillchange.
Youswitchtoadifferentinputandthescreensizechanges. • Thisunitwillmemorizetheviewingmodefromthelasttimeyouusedtheparticularinputmodes.
Thedisplayimagedoesnotcovertheentirescreen.
• IfyouareusingtheunitasaPCmonitor,makesurethat[Horizontal Position]and[Vertical Position]in[PC Settings]aresetcorrectly.
• IfyouarewatchingTVorusingtheCompositeVideo,ComponentVideoorHDMIwith480iInput,pressFORMATrepeatedlytoswitchvariousscreenmodes.
Captionsaredisplayedasawhitebox.NocaptionisdisplayedintheClosedCaption-supportedprogram.
• Interferencefrombuildingsorweatherconditionsmaycausecaptioningtobeincomplete.• Broadcastingstationmayshortentheprogramtoinsertadvertisement.
Theclosedcaptiondecodercannotreadtheinformationoftheshortenedprogram.
BlackboxisdisplayedontheTVscreen. • Thetextmodeisselectedforcaption.Select[CC-1],[CC-2],[CC-3],[CC-4]or[Off].
Note• TheLCDscreenismanufacturedtoprovidemanyyearsofusefullife.Occasionallyafewnonactivepixelsmayappearasafixedpointofblue,greenorred.ThisisnottobeconsideredadefectintheLCDscreen.• Somefunctionsarenotavailableinspecificmodes,butthisisnotamalfunction.Readthedescriptioninthismanualformoredetailsoncorrectoperations.
29IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
INFORMATION
GlossaryATSCAcronymthatstandsforAdvancedTelevisionSystemsCommitteeandthenameofthedigitalbroadcastingstandards.Aspect RatioThewidthofaTVscreenrelativetoitsheight.ConventionalTVsare4:3(inotherwords,theTVscreenisalmostsquare);widescreenmodelsare16:9(theTVscreenisalmosttwiceaswideasitsheight).CEC (Consumer Electronics Control)ThisallowsyoutooperatethelinkedfunctionsbetweenourbranddeviceswithCECfeatureandthisunit.Wedonotguarantee100%interoperabilitywithotherbrandsofCECcompliantdevices.Component VideoThisisavideosignalformatthatconveyseachof3principalcolorsoflight(red,blueandgreen)throughdifferentsignallines.Thisallowstheviewerstoexperiencepicturecolorsasoriginalasitis.Thereareseveralsignalformats,includingY/Pb/PrandY/Cb/Cr.Dolby DigitalThesystemdevelopedbyDolbyLaboratoriestocompressdigitalsound.Itoffersstereosound(2ch)ormulti-channelaudio.E-StickerE-Stickerisshowingsetfeatures,technicalinformation,etconthisTVsetthatisdisplayedontheTVscreen.Previouslytheinformationwasonaprintedstickerthatwasputonthedisplay.HDMI (High-Definition Multimedia Interface)Interfacethatsupportsalluncompressed,digitalaudio/videoformatsincludingset-topbox,Blu-ray/DVDrecorderordigitaltelevision,overasinglecable.HDTV (High Definition TV)Ultimatedigitalformatthatproduceshighresolutionandhighpicturequality.NTSCAcronymthatstandsforNationalTelevisionSystemsCommitteeandthenameofanalogbroadcastingstandards.OfftheairNTSCsignalsarenolongerbeingsentbymajorbroadcastingstationsintheUSA.PIN codeAstored4-digitnumberthatallowsaccesstoparentalcontrolfeatures.SAP (Secondary Audio Program)Second-audiochanneldeliveredseparatelyfrommain-audiochannel.Thisaudiochannelisusedasanalternateinbilingualbroadcasting.SDTV (Standard Definition TV)StandarddigitalformatthatissimilartotheNTSCpicturequality.
Maintenance
Cabinet Cleaning• Wipethefrontpanelandotherexteriorsurfacesofthe
unitwithasoftcloth.• Neveruseasolventoralcohol.Donotsprayinsecticide
liquidneartheunit.Suchchemicalsmaycausedamageanddiscolorationtotheexposedsurfaces.
Panel CleaningWipethepaneloftheunitwithasoftcloth.Beforecleaningthepanel,disconnecttheACpowercord.
ServicingShouldyourunitbecomeinoperative,donottrytocorrecttheproblemyourself.Therearenouserserviceablepartsinside.Callourtollfreecustomersupportlinefoundonthecoverofthismanualtolocateanauthorizedservicecenter.
IR Signal CheckIftheremotecontrolisnotworkingproperly,youcanuseadigitalcamera(includingacellularphonewithbuilt-incamera)toseeifitissendingoutaninfraredsignal.
With a digital camera (including built-in cell phone cameras): PointtheDigitalCameratowardstheremotecontrolinfrareddiodeatthefrontoftheremotecontrol.Pressanybuttonontheremotecontrolandlookthroughthecameradisplay.Iftheinfraredpulsatinglightappearsthroughthecamera,theremotecontrolissendingoutanIRsignal.
30
General SpecificationsTV format ATSC / NTSC-M TV standardClosed Caption system
§15.122 / FCC (digital CC) §15.119 / FCC (analog CC)
Channel coverage (ATSC / NTSC)Terrestrial DTV (ATSC)
VHF 2~13UHF 14~51 (each channel has e.g.
2.1~2.9, 3.1~3.9, etc.)Terrestrial Analog (NTSC)
VHF 2~13UHF 14~69
CATV 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A
Tuning system Channel frequency synthesized tuning system
Channel access Direct access keyboard,Programmable scan, and up / down
Electrical SpecificationAudio Output 10W, 8 Ω x 2
• Designs and specifications are subject to change without notice and without our legal obligation.
• If there is a discrepancy between languages, the default language will be English.
Other SpecificationsTerminalsAntenna Input VHF / UHF / CATV 75 Ω unbalanced (F-type)Audio Input RCA jack (L/R) x 2 500mV rmsComponent / Composite (VIDEO) Video Input jacks for VIDEO
RCA jack x 3 Y/ VIDEO 1V p-p (75 Ω)Pb/Cb 700 mV p-p (75Ω)Pr/Cr 700 mV p-p (75Ω)
HDMI Input HDMI 19 pin x 2USB Input USB x 1PC Input1 D-Sub 15 pin x 1(RGB)Digital Audio Output (coaxial)
RCA jack x 1 500 mV p-p (75 Ω)
Remote controlDigital encoded infrared light system
Operating temperature41 °F (5 °C) to 104 °F (40 °C)
Power requirements120V~ AC +/− 10%, 60Hz +/− 0.5%
Power consumption (maximum)110 W
LCD 26 inchesDimensions <without base> <with base> Width 25.9 inches (656.0 mm) 25.9 inches (656.0 mm) Height 17.7 inches (448.0 mm) 19.2 inches (487.0 mm) Depth 3.7 inches (93.0 mm) 9.4 inches (238.0 mm)Weight 12.57 lbs. (5.70 kg) 13.67 lbs. (6.20 kg)
31IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
32
Limited WarrantyWARRANTY COVERAGE:This warranty obligation is limited to the terms as set forthbelow.
WHO IS COVERED: This product warranty is issued to the original purchaser or theperson receiving the product as a gift against defects in materialsand workmanship as based on the date of original purchase(“Warranty Period”) from an Authorized Dealer. The originalsales receipt showing the product name and the purchase datefrom an authorized retailer is considered such proof.
WHAT IS COVERED:This warranty covers new products if a defect in material orworkmanship occurs and a valid claim is received within theWarranty Period. At its option, the company will either (1)repair the product at no charge, using new or refurbishedreplacement parts, or (2) exchange the product with a productthat is new or which has been manufactured from new, or ser-viceable used parts and is at least functionally equivalent or mostcomparable to the original product in current inventory, or (3)refund the original purchase price of the product.Replacement products or parts provided under this warranty arecovered against defects in materials and workmanship from thedate of the replacement or repair for ninety (90) days or for theremaining portion of the original product’s warranty, whicheverprovides longer coverage for you. When a product or part isexchanged, any replacement item becomes your property and thereplaced item becomes company property. When a refund isgiven, your product becomes company property. Note: Any product sold and identified as refurbished orrenewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warrantyrequirements are met. Failure to follow all requirementscan result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-TATIONS:This Limited Warranty applies only to new company manufac-tured products that can be identified by the trademark, tradename, or logo affixed to it. This Limited Warranty does not applyto any hardware product or any software, even if packaged orsold with the product, as manufacturers, suppliers, or publishersmay provide a separate warranty for their own products pack-aged with the bundled product.
The company is not liable for any damage to or loss of any pro-grams, data, or other information stored on any media containedwithin the product, or other additional product or part not cov-ered by this warranty. Recovery or reinstallation of programs,data or other information is not covered under this LimitedWarranty.
This warranty does not apply (a) to damage caused by accident,abuse, misuse, neglect, misapplication, or non-supplied product,(b) to damage caused by service performed by anyone other thancompany approved Authorized Service Location, (c) to a product
or a part that has been modified without written company per-mission, or (d) if any serial number has been removed or defaced,or (e) product, accessories or consumables sold “AS IS” withoutwarranty of any kind by including refurbished product sold “ASIS” by some retailers.
This Limited Warranty does not cover:• Shipping charges to return defective product. • Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation orrepair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improperinstallation or maintenance, connections to improper voltagesupply, power line surge, lightning damage, retained images orscreen markings resulting from viewing fixed stationary con-tent for extended periods, product cosmetic appearance itemsdue to normal wear and tear, unauthorized repair or othercause not within the control of the company.
• Damage or claims for products not being available for use, orfor lost data or lost software.
• Damage from mishandled shipments or transit accidents whenreturning product.
• A product that requires modification or adaptation to enableit to operate in any country other than the country for whichit was designed, manufactured, approved and/or authorized, orrepair of products damaged by these modifications.
• A product used for commercial or institutional purposes(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receiptcan be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…Contact the Customer Care Center at:
REPAIR OR REPLACEMENT AS PROVIDED UNDER THISWARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-SUMER, WITH THE ISSUING COMPANY NOT LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BYAPPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSEON THIS PRODUCT IS LIMITED IN DURATION TO THEDURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of inciden-tal or consequential damages, or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions maynot apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
LIMITED WARRANTYNINETY (90) DAY LABOR / ONE (1) YEAR PARTS
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
1 866
33IN
TROD
UC
TION
PREPARATIO
N
WATC
HIN
G TV
USING
FUNCTIO
NS
USEFU
L TIPS CONNECTING DEVICES
INFO
RMATIO
N
English
top related