p37 drawers unit holder trolley - tecnotelai · art.8 — art. 1 art.7 = 22 12 montaggio per mp 30m...

P37

Via Bonazzi, 4 - 40013 Castel Maggiore (BO) Tel. +39 051 700096 (10 linee) - Fax +39 051 700175

info@tecnotelai.it - www.tecnotelai.it

! /!1 2

DRAWERS UNIT HOLDER TROLLEY installation instructions

2 MOUNTING THE SIDES Connect the 2 sides at the base, each with 3 screws 8x20, nut and washer 8x16.

MOUNTING THE WHEELS Attach the wheels at the base, each with 4 screws TE 8x16, nut and washer 8x24. "

1

MOUNTING SEQUENCE

ART.1=n.16 ART.2=n.16 ART.3=n.16

ART.9=n.1 ART.10=n.2 ART.11=n.1

ART.1=n.6 ART.2=n.6 ART.3=n.6

P37

Via Bonazzi, 4 - 40013 Castel Maggiore (BO) Tel. +39 051 700096 (10 linee) - Fax +39 051 700175

info@tecnotelai.it - www.tecnotelai.it

! /!2 2

3 MOUNTING THE ANGLE IRONS Start fitting the "C" profile which is connected to the sides in the top part and secured with 2+2 cylindrical head screws 6x12, grover nuts and washers 6x12. Continue with the 2 angle irons in the lower part of the sides, fixing them in the same manner.

ART.6=n.12 ART.7=n.12 ART.8=n.12

4 FITTING THE HANDLE It must be fixed in the side that has 2 swivel wheels 1 of which is braking and screwed with 2 socket head screws 8x25.

ART.4=n.1 ART.5=n.2