panelview component specifications - rs components...
Post on 15-Mar-2018
231 Views
Preview:
TRANSCRIPT
-
Technical Data
PanelView Component SpecificationsCatalog Numbers 2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T6C, 2711C-T6T, 2711C-T10C
PanelView Component Family
This component level operator interface provides a control and visualization solution for low-level applications using serial or Ethernet communication. This device can connect directly to the PowerFlex 4 drives. Preferred controllers include the Allen-Bradley Micrologix, SLC, and Micro800 families.
The integrated mounting clamps of the PanelView Component provides easier panel installation and maintenance.
These 2-inch to 10-inch displays have built-in programming software that is accessed from a web browser over a USB or Ethernet connection. This means you can design your application and adjust terminal settings while viewing the results directly on the connected terminal.
Secured programming access, unicode language switching, alarm messages and history, and recipe operations are other key features.
Topic Page
PanelView Component Family 1
Environmental Specifications 2
Certifications 2
Technical Specifications 3
Dimensions 5
Accessories 6
Software 7
Cables 8
Additional Resources 10
-
2 PanelView Component Specifications
Environmental Specifications
Certifications
Table 1 - Environmental Specifications - PanelView Component Terminals
Attribute 2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T6C, 2711C-T6T, 2711C-T10C
Temperature, operating 050 C (32122 F)
Temperature, storage -2570 C (-13158 F)
Heat Dissipation C200/C300: 16 BTU/hrC600: 32 BTU/hrC1000: 58 BTU/hr
Relative humidity 0...95% noncondensing
Vibration 2 g at 10500 Hz
Altitude, operating 2000 m (6561 ft)
Shock, operating 15 g at 11 ms
Shock, nonoperating 30 g at 11 ms
Enclosure ratings NEMA/UL Type 12, 13, 4X (indoor use only), IEC IP54, IP652711C-T6M, 2711C-T6C Series B only: NEMA/UL Type 12, 13, and IEC IP54
Table 2 - Certifications - PanelView Component Terminals
Certification(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T6C, 2711C-T6T, 2711C-T10C
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E113724
CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
http://www.ab.com
-
PanelView Component Specifications 3
Technical Specifications The tables in this section provide technical specifications for the PanelView Component terminals.
PanelView Component C200 and C300
Table 3 - Technical Specifications - PanelView Component C200 and C300 Terminals
Terminal TypeAttribute
C2002711C-F2M
C2002711C-K2M
C3002711C-T3M
C300 2711C-K3M
Display type Monochrome transflective STN passive matrix Monochrome transflective FSTN passive matrix
Display size 2 in. 3 in.
Display area (WxH) 49 x 14 mm (1.93 x 0.55 in.) 67 x 33 mm (2.64 x 1.30 in.)
Resolution 122 x 32 128 x 64
Backlight 50,000 hours life, min.; not replaceable 50,000 hours life, min.; not replaceable
Yellow/Green LED indicator White LED indicator
Operator input 4 function keys (F1F4)Up, down, left, right, Enter keys
10 function keys (F1F10)Numeric keypad 09Up, down, left, right, decimal, +/-, Enter keys
Analog touch 10 function keys (F1F10)Numeric keypad 09Up, down, left, right, decimal, +/-, Enter keys
Real-time Clock No battery backup
Battery 5 year min. at 25 C (77 F)
Programming port USB device port
Communication ports RS-232 (DH-485), RS-232 (DF1), RS485 Multi-vendor communication available for Modbus, Modbus/TCP, Siemens MPI devices
Memory Card USB flash drive
Software Web-enabled software resident in terminal accessed through web browserBrowser support: Firefox 3.0, Internet Explorer 7Emulator available
Preferred controller MicroLogix, SLC, and Micro800 controllers
Input voltage, DC 1830V DC (24V DC nominal)
Power consumption, DC 5 W max (0.21 A at 24V DC)
Weight approx. 0.19 g (0.40 lb) 0.30 kg (0.65 lb) 0.20 kg (0.43 lb) 0.30 kg (0.65 lb)
Dimensions (HxWxD), approx. 80 x 116 x 54 mm3.15 x 4.54 x 2.13 in.
119 x 139 x 55 mm4.69 x 5.47 x 2.15 in.
80 x 116 x 57 mm3.15 x 4.54 x 2.23 in.
119 x 139 x 55 mm4.69 x 5.47 x 2.15 in.
Cutout Dimensions (HxWxD) 65 x 100 mm2.56 x 3.94 in.
100 x 120 mm3.94 x 4.72 in.
65 x 100 mm2.56 x 3.94 in.
100 x 120 mm3.94 x 4.72 in.
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
4 PanelView Component Specifications
PanelView Component C600 and C1000
Table 4 - Technical Specifications - PanelView Component C600 and C1000 Terminals
Terminal TypeAttribute
C6002711C-T6T
C6002711C-T6C
C6002711C-T6M
C10002711C-T10C
Display type Color transmissive TFT active matrix LCD
Color transmissive CSTN passive matrix LCD
Monochrome transmissive FSTN passive matrix
Color transmissive TFT active matrix LCD
Display size 5.7 in. 10.4 in.
Display area (WxH) 115 x 86 mm (4.53 x 3.39 in.) 211 x 158 mm (8.31 x 6.22 in.)
Resolution 320 x 240 640 x 480
Backlight40,000 hours life, min.; not replaceable
50,000 hours life, min.; not replaceable
White LED backlight CCFL
Operator input Analog touchActuation rating: 1,000,000 presses
Real-time clock Battery backup
Battery life 5 year min. at 25 C (77 F)
Programming port USB device port or Ethernet port
Communication ports RS-232 (DH-485), RS-232 (DF1), RS485, EthernetMulti-vendor communication available for Modbus, Modbus/TCP, Siemens MPI devices
Memory Card USB flash driveSecure digital (SD) card: Cat. no. 2711C-RCSD, USB to SD adapter with secure digital (SD)
Software Web-enabled software resident in terminal accessed through web browserBrowser support: Firefox 3.0, Internet Explorer 7Emulator available
Preferred controller MicroLogix, SLC, and Micro800 controllers
Input voltage, DC 1830V DC (24V DC nominal)
Power consumption, DC 10 W max (0.42 A at 24V DC) 18 W max (0.75 A at 24V DC)
Weight approx. 0.68 g (1.48 lb) 1.57 kg (3.41 lb)
Dimensions (HxWxD), approx. 154 x 209 x 57 mm6.0 x 8.23 x 2.25 in.
250 x 308 x 54 mm9.84 x 12.13 x 2.13 in.
Cutout Dimensions (HxWxD) 136 x 190 mm5.35 x 7.48 in.
232 x 290 mm9.13 x 11.42 in.
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
PanelView Component Specifications 5
Dimensions Dimensions are provided for the PanelView Component terminals.Figure 1 - PanelView Component C200 and C300 Terminals
Figure 2 - PanelView Component C600 Touch Terminals
a
b
cd
PanelView C300
F1 1 F2 2 F3 3 F4 4 F5 5
F6 6 F7 7 F8 8 F9 9 F10 0
PanelView C200
F1 F2 F3 F4
a
b
cd
PanelView Component C200 and C300 Keypad PanelView Component C200 Function Key and C300 Touch
Table 5 - Dimensions - PanelView Component C200 and C300
PanelView Component
Height, Approx. Width, Approx. Depth Overall, Approx.
Mounted Depth, Approx. Cutout Height, Approx. Cutout Width, Approx.
a b c d mm (in.) mm (in.)
C200 and C300 Keypad 119 mm (4.69 in.) 139 mm (5.47 in.) 55 mm (2.15 in.) 49 mm (1.93 in.) 99.0 1.0 (3.90 0.04) 119.0 1.0 (4.69 0.04)
C200 Function Key80 mm (3.15 in.) 116 mm (4.57 in.)
54 mm (2.13 in.)49 mm (1.93 in.)
64.0 1.0 (2.52 0.04) 99.0 1.0 (3.90 0.04)
C300 Touch 57 mm (2.23 in.) 64.0 1.0 (2.52 0.04) 99.0 1.0 (3.90 0.04)
PanelView C600
a
b
cd PanelView C1000
a
cd6
6
PanelView Component C600 Touch PanelView Component C1000 Touch
Table 6 - Dimensions - PanelView Component C600 and C1000
PanelView Component
Height, Approx. Width, Approx. Depth Overall, Approx. Mounted Depth,
Approx. Cutout Height, Approx. Cutout Width, Approx.
a b c d mm (in.) mm (in.)
C600 Touch 154 mm (6.0 in.) 209 mm (8.23 in.) 57 mm (2.25 in.) 49 mm (1.93 in.) 135.0 1.0 (5.31 0.04) 189.0 1.0 (7.44 0.04)
C1000 Touch 250 mm (9.84 in.) 308 mm (12.13 in.) 54 mm (2.13 in.) 49 mm (1.93 in.) 231.0 1.0 (9.09 0.04) 289.0 1.0 (11.38 0.04)
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
6 PanelView Component Specifications
Accessories Tables 710 list the accessories for the PanelView Component terminals.Table 7 - Secure Digital Card
Cat. No. Description
2711C-RCSD USB to SD adapter with secure digital card (SD)
Table 8 - Antiglare Overlays
Cat. No.(1)
(1) Three overlays are shipped with each catalog number.
PanelView Component Model
Input Type
Function Key Numeric Keypad Touch
2711C-RG2F C200
C300
2711C-RG2K C200
C300
2711C-RG6T C600
2711C-RG10T C1000
Table 9 - Power Terminal Blocks
Cat. No. Description Quantity
2711C-RJ422 RS422/485 connector with resistor 10
2711-TBDC DC power terminal block 10
Table 10 - Power Supply
Cat. No. Description Quantity
2711P-RSACDIN DIN-rail mount AC-to-DC power supply, 85265V AC, 4763 Hz 1
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
PanelView Component Specifications 7
Software The PanelView Component stands apart from other HMI devices with its on-terminal programming software. Eliminating the need to install software on a personal computer reduces both start-up and servicing time. Just connect your computer to the PanelView Component through a USB cable or Ethernet, then launch the software through your web browser. Both Microsoft Internet Explorer and Mozilla Firefox are supported. A dashboard provides a single point of entry for accessing all terminal and design operations.
Take advantage of these features while connected to the terminal: Launch the design environment where navigation tabs guide you through
application development. View the results of your design efforts directly on the terminal without
having to download the application first. Modify terminal display and communication settings, view system
information, and enable login security. Transfer files between PanelView Component storage and a USB flash
drive, SD card, or computer; and delete files from terminal storage. Change the start-up application or language the terminal uses for
configuration screens and diagnostic messages.
For programming without a PanelView Component, an emulator for Windows XP and Vista systems is also available. The emulator and browser must be on the same computer.
Table 11 - Supported Operating Systems and Browsers
Operating System Browser Platform Supported
Windows Vista Internet Explorer 7Firefox 3.0 Terminal and emulator
Windows XP SP2 Internet Explorer 7Firefox 3.0
Terminal and emulator
Windows 2000 SP4(1)
(1) Using Ethernet network connection only.
Internet Explorer 7Firefox 3.0
C600 and C1000 terminal using Ethernet
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
8 PanelView Component Specifications
Cables The table summarizes cables used by the PanelView Component terminals.
Runtime Communication Cables
Tables 1316 provide a summary of connections between PanelView Component terminals and controllers or interface modules for runtime communication.
Table 12 - Cables and Adapters
Cat. No. Description Connectors Length
2711C-CBL-UU02 USB host to USB device programming cable. 2 m (6.5 ft)
2711C-CBL-AB03 RS-485 (5-pin) to RJ45 operating/programming cable for connecting PanelView Component terminals to SLC 5/01, 5/02, 5/03 controllers.
RS-485 (5-pin) to RJ45
1747-CP3 Operating/programming cable for connecting PanelView Component terminals to SLC and MicroLogix controllers.
9-pin D-shell to 9-pin D-shell null modem cable
3 m (10 ft)
1761-CBL-PM02 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers.
9-pin D-shell to 8-pin mini DIN 2 m (6.5 ft)
2711-CBL-PM05 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers. 9-pin D-shell to 8-pin mini DIN
5 m (16.4 ft)
2711-CBL-PM10 RS-232 operating/programming cable for connecting PanelView Component terminals to MicroLogix controllers. 9-pin D-shell to 8-pin mini DIN
10 m (32.7 ft)
2711P-CBL-EX04 Ethernet CAT5 crossover cable for use with PanelView Component C600 and C1000 terminals. RJ45 to RJ45
4.3 m (14 ft)
1761-NET-AIC AIC+ advanced interface converter, RS-232/RS-485.
Table 13 - Runtime Communication Cables: PanelView Component to SLC Controllers
Protocol PanelView Component Comm PortSLC 500, 5/01, 5/02
CH1 (RJ45) (DH-485)
SLC 5/03, 5/04, 5/05CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03CH1 (RJ45)(DH-485)
SLC 5/04CH1 (DH+)
SLC 5/05CH1 (ENET)
DF1 RS-232 (DF1) port (9-pin) 1747-CP3 (3 m/10 ft)
DH-485RS-232 (DH-485) port (9-pin)
Use AIC+ module(1761-NET-AIC)
to connect to Port 1 or 21747-CP3 (3 m/10 ft)
Use AIC+ module(1761-NET-AIC)
to connect to Port 1 or 2
RS-485 (DH-485) port (5-pin) 2711C-CBL-AB03(1) 2711C-CBL-AB03(1)
EtherNet/IP EtherNet/IP port Use 1761-NET-ENI modulewith Ethernet cable
1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (2)
(1) The AIC+ module is recommended for isolation purposes when the terminal and controller are not on the same power supply.(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
PanelView Component Specifications 9
Table 14 - Runtime Communication Cables: PanelView Component to MicroLogix Controllers
Protocol PanelView Component Comm PortMicroLogix 1400, 1500LRP
CH1/CH2 (9-pin RS-232)(DF1 or DH-485)
MicroLogix 1000, 1100, 1200, 1400, 1500LSPCH0 (8-pin Mini DIN)
(DF1 or DH-485)MicroLogix 1100, 1400
Ethernet
DF1 RS-232 (DF1) port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft) (1)
DH-485 RS-232 (DH-485) port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft) (1)
EtherNet/IP EtherNet/IP portUse 1761-NET-ENI module
with Ethernet cable1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (2)
(1) The AIC+ module is recommended for isolation purposes when the terminal and controller are not on same power supply.(2) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 15 - Runtime Communication Cables: PanelView Component to CompactLogix Controllers
Protocol PanelView Component Comm PortCompactLogix
CH0 (9-pin RS-232)(DF1 or DH-485)
DF1 RS-232 (DF1) port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
DH-485 RS-232 (DH-485) port (9-pin)2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
EtherNet/IP EtherNet/IP port 1585J-M type cable or 2711P- CBL-EX04 (4 m/14 ft) (1)
(1) For a direct connection between the terminal and controller, use the 2711P-CBL-EX04 crossover cable.
Table 16 - Runtime Communication Cables: PanelView Plus to Interface Modules
Protocol PanelView Plus Comm Port1761-NET-AICPort 1 (9-pin)
1761-NET-AICPort 2 (8-pin Mini DIN()
1761-NET-AICPort 3 (DH-485)
DF1 RS-232 port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft)
DH-485 RS-232 port (9-pin) 1747-CP3 (3 m/10 ft)1761-CBL-PM02 (2 m/6.5 ft)2711-CBL-PM05 (5 m/16 ft)
2711-CBL-PM10 (10 m/12 ft)
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
10 PanelView Component Specifications
Additional Resources These documents contain additional information concerning related Rockwell Automation products.
You can view or download publications at http://rockwellautomation.com/literature. To order paper copies of technical documentation, contact your local Rockwell Automation distributor or sales representative.
Table 17 - Additional Resources
Resource Description
PanelView Component Installation Instructions, publication 2711C-IN001
Provides instructions for installing a PanelView Component terminal.
PanelView Component User Manual, publication 2711C-UM001
Provides information on how to configure and operate the PanelView Component terminal, including troubleshooting information.
PanelView Component Quick Start, publication 2711C-QS001
Provides instructions on setting up a sample application on a PanelView Component terminal.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.ab.com
Provides declarations of conformity, certificates, and other certification details.
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2711c-in001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711c-um001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/qs/2711c-qs001_-en-p.pdfhttp://literature.rockwellautomation.comhttp://ab.comhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/1770-in041_-en-p.pdf
-
PanelView Component Specifications 11
Notes:
Rockwell Automation Publication 2711C-TD001A-EN-P - October 2010
-
Important User Information
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400
Publication 2711C-TD001A-EN-P - October 2010 Copyright 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid-state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.
Allen-Bradley, PanelView Component, CompactLogix, ControlLogix, SLC, Rockwell Software, PowerFlex, Rockwell Automation, and TechConnect are trademarks of Rockwell
Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/sgi-in001_-en-p.pdfhttp://www.rockwellautomation.com/literature/http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdfhttp://www.rockwellautomation.com/literature/
2711C-TD001A-EN-P, PanelView Component SpecificationsPanelView Component FamilyEnvironmental SpecificationsCertificationsTechnical SpecificationsPanelView Component C200 and C300PanelView Component C600 and C1000
DimensionsAccessoriesSoftwareCablesRuntime Communication Cables
Additional ResourcesBack Cover
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Average /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice
Introduction_Catagory Types
This tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing.Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas).For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.
Publication Type and Print Category
Publication TypeOff Set Print Category Spec. (See table below)JIT Spec. (See table below)DescriptionOrder Min **Order Max **Life Cycle Usage / Release Option
ADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale / Internal
APA3D2Application Solution or Customer Success Story5100Presale / External
ARNANAArticle/Editorial/BylineNANAPresale / Internal
(press releases should not be checked into DocMan or printed)
ATB3, B4D5Application techniques5100Presale / External
BRA2 Primary, A1NABrochures5100Presale / External
CAC2 Primary, C1NACatalogue150Presale / External
CGNANACatalogue Guide150Presale / External
CLNANACollection550Presale / External
COA5, A6, A9D5Company Confidential InformationNANANA / Confidential
CPE-onlyE-only, D5Competitive Information550NA / Confidential
DCE-onlyE-onlyDiscount SchedulesNANAPresale / Internal
DIA1, A3NADirect Mail5100Presale / Internal
DMNANAProduct Demo550Presale / Internal
DSB3D5Dimensions Sheet15Post / External
DUB3D5Document Update15Post / External
GRB2D6Getting Results15Post / External
INB3 Primary, B2D5, D6Installation instructions15Post / External
LMNANALaunch Materials550Presale / Internal
PCB3D5Packaging Contents
PLE-only primary, B3E-onlyPrice List550Presale / Internal
PMB2D6Programming Manual15Post / External
PPA3D1Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.5100Presale / External
QRB2 primary, B3, B5D5, D6Quick Reference15Post / External
QSB2 primary, B3, B5D5, D6Quick Start15Post / External
RMB2D5, D6Reference Manual15Post / External
RNB3D5Release Notes15Post / External
SGB1 Primary, B4D5, D6Selection Guide Colour550Presale / External
SGB2D5, D6Selection Guide B/W550Presale / External
SPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to be assigned the PP pub type.5100Presale / Internal
SRB2, B3D5, D6Specification Rating Sheet5100Presale / External
TDB2 Primary B3, B4, B5D5, D6Technical Data550Presale / External
TGB2, B3D6Troubleshooting Guide15Post / External
UMB2 Primary, B4D6User Manual B/W15Post / External
WDB3D5Wiring Diagrams / Dwgs15Post / Internal
WPB3 Primary, B5D5White Paper550Presale / External
** Minimum order quantities on all JIT items are based on the publication length. **
Publication lengthMinimum Order Quantity
77 or more pages1 (no shrink wrap required)
33 to 76 pages25
3 to 32 pages50
1 or 2 pages100
Pre-sale / MarketingAll paper in this category is White Brightness, 90% or better. Opacity 90% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
A14 color170 gsm 2pp100# gloss cover, 100# gloss text
A24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss text
A34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss cover, 80# gloss text
A42 color170gsm Silk 120gsm Silk80# gloss cover, 80# gloss text
A52 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text
A61 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet text
A74 color cover2 color textSelection GuideCategory being deleted10 Point Cover C2S50# matte sheet text
A84 color coverCategory being deleted50# matte sheet text, self cover
2 color text
Selection Guide
A92 color100gsm bond50# matte sheet text, self cover
Selection Guide
Gray shading indicates Obsolete Print Catagories
Post Sale / Technical Communication
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
B14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S
2 color text50# matte sheet text
B21 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B31 color100gsm bond50# matte sheet text, self cover
B42 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B52 color100gsm bond50# matte sheet text, self cover
Catalogs
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
C14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S
4 color text45# Coated Sheet
C24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S
2 color text32#-33# Coated Sheet
JIT / PODAll paper in this category is White Brightness, 82% or better. Opacity 88% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
D14 color170gsm white silk80# gloss cover, coated 2 sides
D24 color120gsm white silk80# gloss text, coated 2 sides, self cover
D34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss text coated 2 sides
D41 color160gsm tab90# index
D51 color80gsm bond20# bond, self cover
D61 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D72 color160gsm tab90# index
D82 color80gsm bond20# bond, self cover
D92 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D10Combination: 4 color cover, with 2 color bodyCover 160gsm with Body 80gsm90# index, 20# bond
Gray shading indicates Obsolete Print Catagories
Just In Time (JIT) or Off Set (OS)?
Use these guidelines to determine if your publication should be JIT (just in time/print on demand) or if it would be more economical to print OS (offset/on a press). OS print jobs require an RFQ (Request For Quote) in US. If your job fits into the Either category, an RFQ is recommended, but not required. In the US, RA Strategic Sourcing will discourage or reject RFQs for jobs that fall within the JIT category. Guidelines differ for black & white and color printing, so be sure to check the correct tables.
Black & White Printing
Color Printing
Color Printing
Print Spec Sheet
JIT Printing SpecificationsRA-QR005G-EN-P - 3/29/2010
Printing SpecificationYOUR DATA HEREInstructionsNO
(required) Category:D5Select Print Category A,B,C or D from category list, on "Introduction_Catagory Types" tab11 x 17LOOSE -Loose LeafYESPre-sale / MarketingTOP
(required) Finished Trim Size Width:8.5 x 118.5 x 11PERFECT - Perfect BoundA1LEFT
(required) Publication Number :2711C-TD001A-EN-PSample: 2030-SP001B-EN-P3 x 5SADDLE - Saddle StitchA2RIGHTCORNER
Use Legacy NumberYES or NO18 x 24 PosterPLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDE
Legacy Number if applicable:Sample Legacy Number: 0160-5.3324 x 36 PosterSTAPLED1 -1 positionA3
Publication Title:PanelView Component SpecificationsSample: ElectroGuard Selling Brief80 character limit - must match DocMan Title36 x 24 PosterSTAPLED1B - bottom 1 positionA5
(required) Business Group:Marketing CommercialAs entered in DocMan4 x 6STAPLED2 - 2 positionsA6
(required) Cost Center:As entered in DocMan - enter number only, no description. Example - 19021CMKMKE CM Integrated Arch - 19021CMKMKE Market Access Program - 191054.75 x 7 (slightly smaller half-size)THERMAL - Thermal bound (Tape bound)A7
Binding/Stitching:SADDLE - Saddle StitchReview key on right...Saddle-Stitch Items All page quantities must be divisible by 4.Note: Stitching is implied for Saddle-Stitch - no need to specify in Stitching Location.80 pgs max. on 20# (text and cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and cover)
Perfect Bound Items940 pgs max. w/cover (90# index unless indicated otherwise)70 pgs. min. for spine without words200 pgs min. for spine with words
Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)
Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover (90# index unless indicated otherwise)4.75 x 7.75THERMALO - Thermal Bound (Tape bound - offline)A8
(required) Page Count of Publication:10Total page count including cover5.5 x 8.5 (half-size)A9
Paper Stock Color:White is assumed. For color options contact your vendor.6 x 4Post Sale / Technical Communication
Number of Tabs Needed:5 tab in stock at RR Donnelley7.385 x 9 (RSI Std)B1
Stitching Location:Blank, Corner or Side8.25 x 10.875B2
Drill Hole YES/NOYESAll drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of inch from the inner page border.8.25 x 11 (RA product profile std)B3None
Glue Location on Pad:Glue location on pads8.375 x 10.875B4Half or V or Single Fold
Number of Pages per Pad:Average sheets of paper.. 25, 50 75,100 Max9 x 12 (Folder)B5C or Tri-Fold
Ink ColorOne color assumes BLACK / 4 color assume CMYK / Indicate PMS number hereA4 (8 x 11 ) (210 x 297 mm)CatalogsDbleParll
Used in Manufacturing:A5 (5.83 x 8.26) (148 x 210 mm)C1Sample
Fold:Review key on right...Short (must specify dimensions between folds in Comments)
Comments:E only document, print specs provided just in caseC2Z or Accordian Fold
Part Number:JIT / PODMicrofold or French Fold - designate no. of folds in Comments - intended for single sheet only to be put in box for manufacturing
D1Double Gate
D2
FoldsHalf, V, Single C or Tri
Dble Parll
Z or Accordian Microfold or French
Double Gate
Short FoldD3
D4
D5
D6
D7
D8
D9
MBD000CCD74.bin
MBD000D141F.bin
MBD000E357A.bin
MBD000D05AE.bin
MBD000B37AA.bin
MBD000C2CF0.bin
MBD000CBFEF.bin
MBD000B71E5.bin
MBD000AB9B4.bin
MBD000AF7AA.bin
top related