page 1 of 13 - cpri.in07technicalbidsectioniicpriblr17rccdd041.pdfpage 1 of 13 revision no. : 03...
Post on 12-Feb-2018
215 Views
Preview:
TRANSCRIPT
Page 1 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
1 Place where item to be supplied Cables & Diagnostics Division, Diagnostic Laboratory Central Power
Research Institute, Bangalore
2 General: The PMT Modules, Power Supplies, Amplifiers Modules, Optical
Blocks,and Stabilized Light Source for PMT Modules shall be used in
a research project for research and developement of a novel
optoelectronic technique for online patrial discharge monitoring of
transformers
Technical
3 Photo Multiplier Tube (PMT) Modules Cable Out Put Type
3 (a) PMT Modules (Current Output) confirming to the following
specifications.
03 Nos.
Spectral Response: 230 nm to 870 nm
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 2 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Photo Cathode: Multialkali
Window Material: Borosilicate glass
Input Voltage: +11.5 V DC to +15.5 V DC
Max. Input Voltage: +18 V DC
Max. Input Current: 12 mA DC
Max. Average Output Signal Current: 100 µA DC
Max. Control Voltage: +1.1 V DC
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 3 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Recommended Control Voltage
Adjustment Range:
+0.5 V DC to 1.1 V DC
Effective Area: Φ8 mm
Peak Sensitivity Wave Length: 400 nm
Gain 5E3 or better @ min control voltage of 0.5 V DC to 4E6 or better @
max. control voltage of 1.1V
Cathode Luminous Sensitivity: 200 µA/lm
Cathode Red White Ratio: 0.2
Cathode Radient Sensitivity: 77 mA/W
Anode Luminous Sensitivity: 400 A/lm
Cath
od
eA
no
de
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 4 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Anode Radient Sensitivity: 1.5E5 A/W
Dark Current: 1 nA
Rise Time: 0.57 ns
Ripple Noise (peak to peak): 0.6 mV
Settling Time: 0.2 s
Operating Temperature: +5 ⁰C to +50 ⁰C
Storage Temperature: -20 ⁰C to +50 ⁰C
3 (b) PMT Modules (Voltage Output) confirming to the following
specifications.
03 Nos.
Spectral Response: 230 nm to 870 nm
An
od
e
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 5 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Photo Cathode: Multialkali
Window Material: Borosilicate glass
Inpu Voltage: ±11.5 V DC to ±15.5 V DC
Max. Input Voltage: ±18 V DC
Max. Input Current: +20/-8mA DC
Max. Output Signal Voltage: +10 V DC
Max. Control Voltage: +1.1 V DC
Recommended Control Voltage
Adjustment Range:
+0.5 V DC to 1.1 V DC
Effective Area: Φ8 mm
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 6 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Peak Sensitivity Wave Length: 400 nm
Gain 5E3 or better @ min control voltage of 0.5 V DC to 4E6 or better @
max. control voltage of 1.1V
Cathode Luminous Sensitivity: 200 µA/lm
Cathode Red White Ratio: 0.2
Cathode Radient Sensitivity: 77 mA/W
Anode Luminous Sensitivity: 4.0E7 V/lm
Anode Radient Sensitivity: 15 V/nW
Voltage Output dedpending on PMT Dark
Current:
0.1mV
Cath
od
eA
nod
e
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 7 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Frequency Band width (-3dB): DC to 200kHz
Current to Voltage Conversion Factor: 0.1 V/µA
Output Offset Voltage: ±1 mV
Ripple Noise (peak to peak): 1 mV
Settling Time: 0.2 s
Operating Temperature: +5 ⁰C to +50 ⁰C
Storage Temperature: -20 ⁰C to +50 ⁰C
4 Power Supply for PMT Modules confirming to the following
specifications. The power supply should be suitable for supplying
Input voltage and control voltage for the above PMT Modules.
03 Nos.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 8 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Ouput Voltage: ±15 V DC
Output Current: 0.3 A (+15 V DC), 0.2 A (-15 V DC)
Control Voltage (a variable voltage
range):
+0.25V to +1.8 V
Input Voltage: AC 100 to AC 240, 50Hz
5 Amplifier Units confirming to the following specifications. 03 Nos.
Frequency Bandwidth (-3dB): DC to 1MHz
Current to Voltage Conversion Factor: 1 V/µA
Rise time: 350 ns
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 9 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
Signal Input Polarity (Output): Positive/Negative
Amplifying Method: Inverting Output
Outpu Impedance: 50 Ω
Max. Ouput Voltage: ±11 V (1 kΩ load resistance), ±3 V (50 Ω load resistance)
Output Noise Voltage 1 mV rms
Signal Connector: Input: BNC-R, Output: BNC-R
Power Supply Voltage: ±15 V DC
Max. Power Supply Voltage: ±18 V DC
Max. Power Supply Current: ±100 mA DC
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 10 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
6(a) Fiber Adapter Block (Visible): Optical Fiber cables with FC connectors can be connected to the
blocks. The lens assembly in the block should collimate the light
spread from the optical fiber with focal length of 10 mm.
03Nos.
6(b) Fiber Adapter Block (Ultra Violet): Optical Fiber cables with SMA connectors can be connected to the
blocks. The lens assembly in the block should collimate the light
spread from the optical fiber with focal length of 10 mm.
03Nos.
7 Adapter Block: Adapter block should be suitable for connecting PMT module to an
optical block with V-groove connector.
03Nos.
8(a) Optical Fiber adapter Sub Miniature A
Type (SMA Type):
Optical fiber adapter allows connection to an optical fiber cable which
has SMA connector. Guiding the light with an optical fiber should be
easily performed by fixing this adaptor to incident surface of the
photomultiplier tube module.
06 Nos.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 11 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
8(b) Optical Fiber adapter Fiber Channel Type
(FC Type):
Optical fiber adapter allows connection to an optical fiber cable which
has FC connector. Guiding the light with an optical fiber should be
easily performed by fixing this adaptor to incident surface of the
photomultiplier tube module.
06 Nos.
9 Stabilised Light Source The light source should be suitable for adjusting the sensitivity of PMT
modules. The light source should confirm to the following
specifications.
01 No.
Peak emission wave length: 465 nm
Spectral half width: 26 nm
Light emission power: 1±0.5 pW
Emisssion Stability: ±2% Max. (0 ⁰C to +50 ⁰C )
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 12 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
10 Manual: Original data sheet, test certificate, operating & maintenance manual
in English with detailed circuit diagram indicating the values covering
all passive & active components-01 Set for each of the above listed
items.
01 Set
11 Warranty: One year warranty from the date of successful commissioning at CPRI.
12 Inspection and qualification requirements The Photo Multiplier Tube (PMT) modules shall be tested and
demonstrated for its functionality by the supplier representative by
using the stabilised light source, power supply modules and amplifier
mdodules etc. The item supplied should be free from any physical
damages and should function satisfactorily with stabilised light source,
power supply modules and amplifier modules etc.
13 Payment Terms: 100% payment by RTGS within 30 days after receipt of material and
satisfactory functionality test.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
Page 13 of 13
Revision No. : 03 Issue No : 2
Dt of Revision : 25.07.2017 Issue Dt. : 30.06.2003
Issued by : P A
Section : Formats Documents : PPM
Topic : e-Tender Technical Specification Document FORMAT NO.:CPRI/PUR/TBID/GTP
To be completed by the BidderGuaranteed
Technical
Particulars (GTP)
Specify
deviations/
Remarks if any
3) Pre-despatch Inspection & Training expenses shall be borne by CPRI. Information regarding the readiness of the equipment/machinery for the Pre-despatch
Inspection should be communicated in writing by the supplier at least 70 (Seventy) days in advance, to obtain clearence from the Ministry, Government of India for
deputation of nominated CPRI officers.
Name of the Vendor
Sl.No. Parameters CPRI Specification / Requirements
2) All blue fields are mandatorily to be filled in.
Quotation Number and Date
Qty
CENTRAL POWER RESEARCH INSTITUTE, BANGALORE Web: www.cpri.in, www.tenderwizard.com/CPRI, Telefax: 080-2360 4446
PROCUREMENT PROCEDURE OF CPRI (NON WORKS)
Section II -Technical Specification
Tender Enquiry No : CPRIBLR17RCCDD04
Description of the Equipment/Goods/Services : Photo multiplier Tube (PMT) Modules, Power Supplies, Amplifier Modules, Optical Blocks and Stabilized Light source
for PMT Modules
Note : 1) The Offers should be submitted only in this format otherwise the offer will be liable to be rejected.
14 Delivery Period: Within 6 months from the date of issue of Purchase Order.
PN: 1) Bidder shall indicate complete details/information how the CPRI GTP are complied with against each and every specification parameters & mere statement of 'complied' do not suffice the
requirement.
3) The Indian representative of the foreign/overseas firms shall submit the Letter of Authorization issued by their principals.
Address : Joint Director (Purchase), Purchase Authrity , Central Power Research Institute, Sadashiva Nagar P.O., P.Box.No.8066, Bengaluru-560080.
Telefax: 080-23604446., email:purchase@cpri.in , web : www.cpri.in
4)The bidder shall submit the quotation / offer in the above prescribed format of Section IA , IB and II only . Informations any other forms shall shall be rejected.
2)A detailed technical/catalogue/literature/phamplet and any other technocal details shall be submitted in hard copy in a sealed cover superscribing enquiry number and due date so as to reach the
below mentioned address within due date and time.
PURCHASE DIVISION, CENTRAL POWER RESEARCH INSTITUTE, PROF.SIR C.V.RAMAN ROAD, SADASHIVANAGAR POST, P.B. No.8066, BENGALURU, KARNATAKA. INDIA, PH:080 2360 2919/0825,
TELE FAX : 080 2360 4446, E-mail : purchase@cpri.in, Web : http:www.cpri.in
top related