pelf infotech report
Post on 13-Apr-2018
219 Views
Preview:
TRANSCRIPT
-
7/26/2019 Pelf Infotech Report
1/45
1
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Project Report
On
To Study the Preference for
Enterprise Product Data Management Software
in select Industrial Area.
For
Pelf Infotech Pvt. Ltd.
Submitted by,
Rohitkumar Gaikwad
Under the Guidance of
Prof. Jayashree Vispute
Submitted to
University Of Pune
In Partial fulfillment of Requirements for the Award of Degreeof
Masters of usiness Administration (MBA)
Through
Vishwakarma Institute of Management, Pune.
-
7/26/2019 Pelf Infotech Report
2/45
2
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
ACKNOWLEDGEMENT
I am extremely thankful to Pelf Infotech Pvt. Ltd for giving me an
opportunity to work with them in Market Research Department. This experience at
the beginning of my career will be a very important step towards being a
successful manager. There have been many people investing time and guiding me
in this project.
I would like to thank Ms Vaishali Gughe (HR,Pelf Infotech Pvt. Ltd) andMs Diptee Joshi (Marketing Manager, Pelf Infotech Pvt. Ltd) for giving me the
necessary insight in my internship and guiding me through the project. I would
also like to thank Mr. Ajinkya Huddar, (Director, Pelf Infotech Pvt. Ltd) for
helping me through the project.
I take this opportunity to express my deep sense of gratitude and respect to
my internal project guide Prof. Jayashree Vispute, for investing her precious timeand hard work, without whom this project would not had been completed
successfully. I wish to express a special thanks to Prof. Ketki Kulkarni, (T&P
officer, Vishwakarma Institute of Management) for giving me opportunity to get
this Summer Internship project.
My profound gratitude to Director, Dr. Shailesh Kasande, who is and will
be always a source of inspiration to me.
I would also like to thank all the teaching and non- teaching staffmbers of Vishwakarma Institute of Management, Puneand my friends fortheir support
-
7/26/2019 Pelf Infotech Report
3/45
3
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
INDEX
No. TITLEPage
No.
1.EXECUTIVE SUMMERY
2.COMPANY PROFILE
3.OBJECTIVES OF THE STUDY
4.RESEARCH METHODOLOGY
5.DATA ANALYSIS
6.
FINDINGS
7.LIMITATIONS
8.RECOMMENDATIONS
9.CONCLUSION
10.BIBLOGRAPHY
11.ANNEXURE
-
7/26/2019 Pelf Infotech Report
4/45
4
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
EXECUTIVE SUMMARY
-
7/26/2019 Pelf Infotech Report
5/45
5
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
The project titled To Study the Preference for Enterprise ProductData Management Software in select Industrial Area.forPelf Infotech
Pvt. Ltd. Pune. Major Focus of project was to find out the preferences forEPDM software in select industrial area.
The project report is prepared by conducting a survey through a structuredquestionnaire through visiting companies within the periphery of Pune and Ihave to study their preferences towards EPDM software.
The survey was conducted with sample size of 143 and the data collected wasprimary data on which the analysis was made accordingly with the hope thatit would make a value addition about the Pelf Infotech Pvt. Ltd. And towardsmy knowledge as a student of MBA.
The information is collected with the help of questionnaire which areprepared by me on the basis of possibility that it would cover the importantdetails about the response of the companies. The survey was done throughquestionnaire and the facts and findings which came out after completing thestudy revealed that the views differ from question to question and person to
person but the fact after summing up the data was that most of the companiesdont use Product data Management Software for their Product Data
management which should be taken into consideration by Pelf Infotech Pvt.
Ltd.
-
7/26/2019 Pelf Infotech Report
6/45
6
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
VISION
We understand and satisfy the needs of CAD technology - globally.
MISSION
The Software implementation methodology best suited to the customerexpectations is jointly determined by working closely with the customer.PIPLs focus is to be able to deliver quality results, the first time, every time.
ACHIEVEMENTS
Awarded by SolidWorks for outstanding performance for Best PSU /Defence mapping in India Year 2007.
SERVICES PROVIDED
1. SolidWorks 3D CAD2. SolidWorks Simulation(CAE& CFD)
3. SolidWorks Enterprise PDM4. SolidWorks Composer5. SolidWorks Sustainability6. SolidWorks Electrical7. SolidWorks Plastics
-
7/26/2019 Pelf Infotech Report
7/45
7
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
INDUSTRY PROFILE
-
7/26/2019 Pelf Infotech Report
8/45
8
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Starting around the mid-1970s, as computer aided design systemsbegan to provide more capability than just an ability to reproduce
manual drafting with electronic drafting, the cost benefit for companiesto switch to CAD became apparent. The benefit of CAD systems overmanual drafting are the capabilities one often takes for granted fromcomputer systems today; automated generation of Bill of Material, autolayout in integrated circuits, interference checking, and many others.Eventually CAD provided the designer with the ability to performengineering calculations. During this transition, calculations were still
performed either by hand or by those individuals that could runcomputer programs. CAD was a revolutionary change in the engineeringindustry, where draftsmen, designers and engineering roles begin tomerge. It did not eliminate departments, as much as it mergeddepartments and empowered draftsman, designers and engineers. CADis just another example of the pervasive effect computers werebeginning to have on industry.
Current computer-aided design software packages range from2D vector-based drafting systems to 3D solid and surface modelers.Modern CAD packages can also frequently allow rotations in threedimensions, allowing viewing of a designed object from any desiredangle, even from the inside looking out. Some CAD software is capableof dynamic mathematical modeling, in which case it may be marketed asCADD.
CAD is used in the design of tools and machinery and in thedrafting and design of all types of buildings, from small residential types(houses) to the largest commercial and industrial structures (hospitalsand factories).
-
7/26/2019 Pelf Infotech Report
9/45
9
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
CAD is mainly used for detailed engineering of 3D models and/or2D drawings of physical components, but it is also used throughout the
engineering process from conceptual design and layout of products,through strength and dynamic analysis of assemblies to definition ofmanufacturing methods of components. It can also be used to designobjects. Furthermore many CAD applications now offer advancedrendering and animation capabilities so engineers can better visualizetheir product designs.4D BIM is a type of virtual constructionengineering simulation incorporating time or schedule related
information for project management.CAD has become an especially important technology within the
scope of computer-aided technologies, with benefits such as lowerproduct development costs and a greatly shortened design cycle. CADenables designers to layout and develops work on screen, print it out andsave it for future editing, saving time on their drawings.
Key Players:-
1.Auto-CAD
2.Pro-e
3.Solid-edge
4.Catia
5.Solid Works
Auto CAD is leading among all of this as Auto CAD is availablefor free. It also depends on company to purchase the product as per theirrequirement.
-
7/26/2019 Pelf Infotech Report
10/45
10
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
COMPANY PROFILE
-
7/26/2019 Pelf Infotech Report
11/45
11
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
PROFILE
From the modest beginning in the year 2002, Pelf Infotech Pvt. Ltd. (PIPL) isgrowing rapidly to become one of the leading Engineering Services and Solution
providers in Pune industrial city of Maharashtra situated in the western part ofINDIA.
Pelf Infotech is the quality driven engineering solutions and services provider inthe areas of CAD -CAM - CAE, Customization, API Development, Training andvarious partner solutions.
BUSINESS PARTNERS
Dassault Systmes SolidWorks Corp. offers complete 3D software tools that letyou create, simulate, publish, and manage your data. SolidWorks products are easy
to learn and use, and work together to help you design products better, faster, andmore cost-effectively. The SolidWorks focus on ease-of-use allows moreengineers, designers and other technology professionals than ever before to takeadvantage of 3D in bringing their designs to life.
-
7/26/2019 Pelf Infotech Report
12/45
12
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Geometric is a specialist in the domain of engineering solutions, services andtechnologies. Geometric is assessed at SEI CMMI Level 5 for its software servicesand ISO 9001:2000 certified for engineering operations. Geometric Technologiesis an established developer of innovative CAD/CAM products. GeometricTechnologies' first product, ProCAD/CAM, was introduced in 1984. CAMWorkswas introduced in 1997. This state-of-the-art solids CAM product is designed for
product oriented manufacturing companies.CAMWorks is available for machiningcenters, turning, mill/turn and wire EDM applications. Geometric Technologies is
committed to delivering quality education and support services to customersworldwide. A rigorous reseller certification program requires resellers to meet andmaintain the highest level of competency for each release to ensure ongoingsupport for all aspects of CAMWorks.
For over 20 years Logopress only business has been the development of die
design software for the Tool & Die Industry as well as Flattening and Blankprediction software for many kinds of parts. Up until 2002 we provided 2Dsoftware solutions in France. In 2000, after 3 years of research and development in3D technology, we decided to also develop 3D parametric solutions and to expandour business worldwide.
-
7/26/2019 Pelf Infotech Report
13/45
13
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
3Dconnexion is committed to driving design innovation by ensuring an intuitiveand natural connection to todays 3D applications and design environments. Thiscommitment has paid off, as 3Dconnexion recently surpassed its one millionth 3Dmouse milestone. According to 3Dconnexions president Dieter Neujahr, thismilestone underscores the widespread adoption of 3D mice in the market, andconfirms that an idea can give birth to a product that becomes a fixed part of ourlives. And the future looks bright as 3Dconnexion continues to bring the benefitsof superior 3D navigation to an ever wider range of software applications and new
market opportunities, bound only by the imagination.
Since its foundation in 1989, CAD Partner GmbH has continued to establish itselfas a competent computer retailer.
Specialising in efficient 3D-CAD-software deployment for engineering and plantproduction, the company's personally developed product family Smap3Dcomprehensively covers the spectrum from Design administration with a standard
parts library and 3D- pipeline planning to product data management (EDM/PDM,PLM).
-
7/26/2019 Pelf Infotech Report
14/45
14
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
PRODUCTS & SERVICES
SOLIDWORKS 3D CAD
SolidWorks 3D CAD software delivers powerful design functionalitywith the intuitive SolidWorks user interface to speed your design processand make you instantly productive
SolidWorks Premium is a comprehensive 3D design solution that addspowerful simulation and design validation to the capabilities of SolidWorksProfessional, as well as ECAD/MCAD collaboration, reverse engineering,
and advanced wire and pipe routing functionality. SolidWorks Professionalbuilds on the capabilities of SolidWorks Standard
to increase design productivity, with file management tools, advancedphotorealistic rendering, automated cost estimation, eDrawingsProfessional collaboration capabilities, automated design and drawingchecking, and a sophisticated components and parts library.
SolidWorks StandardGet up to speed quickly with SolidWorks Standardand unlock the benefits of this powerful 3D design solution for rapidcreation of parts, assemblies, and 2D drawings. Application-specific toolsfor sheet metal, weldments, surfacing, and mold tool and die make it easy todeliver best-in-class designs.
SolidWorks Premium software integrates a broad range of mechanicalCAD, design validation, product data management, design communication,and CAD productivity tools in a single, affordable easy to use package.
Go from concept to virtual prototype faster than you ever thought possiblewith the desired quality using a single easy to use application. SolidWorksPremium is so complete, you can progress from a product concept to ahighly accurate virtual prototype without employing any other software
-
7/26/2019 Pelf Infotech Report
15/45
15
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SOLIDWORKS SIMULATION
With SolidWorks Simulation, you can easily subject your designs to thesame conditions that they'll experience in the real world. Raise the quality of your
products while you reduce your costs for live prototypes and testing.
SolidWorks Simulation ProfessionalSolidWorks Simulation PremiumSolidWorks Flow Simulation
SolidWorks Simulation lets you test products for defects before theyre built,
helping prevent errors early in the design process. It's powerful enough for trained
FEA analysts, yet easy enough for product designers. SolidWorks Simulation caneven help you optimize your designs for maximum performance and savings.
SolidWorks Simulation opens in the SolidWorks user interface, so there's no needto launch multiple applications. You can subject your designs to the sameconditions they'll face in the real world, including stresses, impact, heat, airflow,
and more. There's no need to wait until a product has been manufactured to starttesting, or go through multiple physical prototypes.
You can use SolidWorks Simulation to answer questions such as
will moving parts clash or interfere with one another? how much weight can a product carry? how much will a part deform under specific stresses? will heat and air circulate through the design properly? will it survive a fall?
If you haven't been using Simulation tools because you think they require a Ph.D.in physics, it's time to take another look. SolidWorks Simulation is easy enough for
any designer to use, but still powerful enough to provide real, meaningful results.
Core Simulation capabilities are included with every license of SolidWorksPremium, and additional capabilities can be added as you need them.
http://www.pelfinfotech.com/Simulation_Professional.aspxhttp://www.pelfinfotech.com/Simulation_Premium.aspxhttp://www.pelfinfotech.com/Simulation_flow.aspxhttp://www.pelfinfotech.com/Simulation_flow.aspxhttp://www.pelfinfotech.com/Simulation_flow.aspxhttp://www.pelfinfotech.com/Simulation_Premium.aspxhttp://www.pelfinfotech.com/Simulation_Professional.aspx -
7/26/2019 Pelf Infotech Report
16/45
16
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SOLIDWORKS COMPOSER
Clearly explain and present your product or process using 2D and 3D graphicalcontent that you can quickly create with SOLIDWORKS Composer software.The easy-to-use tools and intuitive product approach let you work directly from 3DCAD data to make high quality illustrations, photorealistic images, and eveninteractive animations without waiting for a physical prototype.
Even nontechnical users can leverage existing product designs withSOLIDWORKS Composer and create associative 2D and 3D deliverables thatautomatically stay up-to-date with the latest design changes. You can start
producing a range of technical communication graphical assets [such as 3D
interactive animations, 2D line art images (SVG, EPS, CGM), and high-resolutionraster images (BMP, JPG, PNG, and TIF files)] earlier in the design process,helping to lower costs and speed time-to-market.
By leveraging the power of 3D, manufacturers can use SOLIDWORKS Composerto produce technical communication that helps customers and partners understandand retain product information more effectively.
-
7/26/2019 Pelf Infotech Report
17/45
17
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SOLIDWORKS SUSTAINABILITY
Conduct life cycle assessment (LCA) on parts or assemblies directly withinthe SolidWorks 3D design window. Search for comparable materials, see in realtime how they affect environmental impact, and easily document your findings.SolidWorks Sustainability provides a screening-level life cycle assessment (LCA)of the environmental impacts of your full design, with seamless integration to yourdesign process. It includes the diverse tools of SustainabilityXpress (partsassessment, alternative materials search, and environmental impact dashboard)with additional capability to assess both parts and assemblies, using parameterssuch as transportation mode and distance, assembly energy, and use-phase energyconsumption. Flexible inputs, such as recycled content level and end-of-life
scenarios, enable more detailed assessments. You can even perform time-dependent environmental comparisons using the varying lifetimes of differentdesign solutions.Assessment results are saved for each design configuration, helping you easilycompare versions. The Assembly Visualization tool ranks the impact of the parts inyour assembly to pinpoint and reassess the sustainability of your design. Seamlessintegration and automatic report generation allow you to quickly communicateyour sustainable design solution.SolidWorks Sustainability uses the gold-standard GaBi LCA environmental impactdatabase from PE International. You can download updates as they becomeavailable, and even request new LCA datasets for your custom materials and
processes as a premium service in partnership with PE International.
-
7/26/2019 Pelf Infotech Report
18/45
18
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
ENTERPRISE PDM SOFTWARE
Collaborating, sharing knowledge and re-using data are critical to yoursuccess. But sharing often means wasting time searching for the right data. Itmeans risking data loss when you accidentally overwrite files with olderversions. It means wasting money when manufacturing uses the wrongversion of a file.
You have problems. We have solutions. Imagine you have product assemblydata on your desktop. The designer next to you has related files on hiscomputer, and a new designer 500 miles away has even more. Without agood data management solution, trouble is waiting to happen.
Solidworks pdm software lets you create an efficient, scalable database with
built-in safeguards against losing or overwriting data. It stores both cadmodels and supporting documents, such as text and graphic documents andemails, in an repository that's easy to use. It also scales to accommodategrowing amounts of data. Solidworks pdm can help you
Collaborate across multiple offices, multiple time zones and even multiplecontinentsreuse standard parts data cost-efficiently, rather than recreating them fromscratchensure your team has immediate access to the latest product data available
save time and simplify searching through files and designs for the right datastreamline workflows, improve performance and cut costs enterprise-wide A solution for any size business
solidworks pdm comes in two versions to serve the needs of different sizeddesign groups: solidworks enterprise pdm and solidworks workgroup pdm.
solidworks enterprise pdmhave we designed anything like this before? Do we still have the cadmodels? Is there any documentation? Who worked on it and when? Shoutingacross the room to ask one of these common questions doesnt work whenthat person is a thousand miles and three time zones away.
solidworks workgroup pdmit doesnt take a huge corporation to amass large design data archives. Withthe pace of product development today, just a few engineers can quicklycreate gigabytes of design data. It's easy for files to get lost or misplaced.
-
7/26/2019 Pelf Infotech Report
19/45
19
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SOLIDWORKS ELECTRICAL
In the complex world of electromechanical design, creating an electrical systemusing 3D CAD can be a demanding and daunting task. Developing design elementsand defining the electrical interconnect of wires, cables, and harnesses is often
borious and error-prone. 3D CAD electrical development has typically been donewith the interchange of design data via external files and manual design. Usingexternal files can cause electrical and mechanical designs to becomeunsynchronized, resulting in design, manufacturing, and supply chaindiscontinuities. Current practices also do not provide easy collaboration betweensign disciplines.
SolidWorks Electrical 3D technology enables faster development of
schematically defined electrical systems that can be readily implemented in the 3DAD model in a 3DEXPERIENCE environment synchronized between the electricaland mechanical design teams. Real-time synchronization of the electricalschematic and 3D CAD model enables unification of the bill of materials (BOM)
between the electrical system and the mechanical design, eliminating errors fromsign changes. SolidWorks Electrical packages provide a range of electricalschematic and 3D design capabilities:
SolidWorks Electrical Schematic A powerful, easy-to-use suite ofcollaborative, schematic design tools that help drive the rapid developmentof embedded electrical systems for equipment and other products. Built-inlibraries of symbols, manufacturer part information, and 3D componentmodels provide common, reusable materials that optimize design reuse.Automated design and management tools streamline and simplify an arrayof tedious design tasks, from PLC and terminal block to contact cross-
reference assignments. SolidWorks Electrical 3D Integrate electrical schematic design data with the
SolidWorks 3D model of a machine or other productbidirectionally andin real time. SolidWorks Electrical 3D enables you to place electricalcomponents and use advanced SolidWorks routing technology toautomatically interconnect electrical design elements within the 3D model.
-
7/26/2019 Pelf Infotech Report
20/45
20
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Determine optimal lengths for wires, cables, and harnesses, all whilemaintaining design and BOM synchronization between electrical and
mechanical designs. SolidWorks Electrical Professional Combine the electrical schematic
functionality of SolidWorks Electrical Schematic with the 3D modelingcapabilities of SolidWorks Electrical 3D in one powerful, easy-to-use
package. SolidWorks Electrical Professional is ideally suited for the userthat supports both electrical and mechanical design integration with 3Dmodels.
-
7/26/2019 Pelf Infotech Report
21/45
21
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SOLIDWORKS PLASTICS
SOLIDWORKS Plastics brings easy-to-use injection molding simulation directlyto the designers of plastic parts and injection molds, as well as advanced CAEanalysis. It simulates how melted plastic flows during the injection molding
process to predict manufacturing-related defects on parts and molds. You canquickly evaluate manufacturability while you design, to eliminate costly moldrework, improve part quality, and accelerate time to market. A Results Adviser
provides troubleshooting steps and practical design advice to help diagnose andavoid potential problems.
SOLIDWORKS Plastics Standardo For plastics part designers, SOLIDWORKS Plastics Standard enables
you to optimize parts for manufacturability in the early stages ofdesign. Easy to learn and use, SOLIDWORKS Plastics Standard isfully embedded within the SOLIDWORKS CAD environment so youcan analyze and modify designs at the same time you optimize forform, fit, and function.
SOLIDWORKS Plastics Professionalo SOLIDWORKS Plastics Professional gives anyone who designs or
builds injection molds an accurate, easy-to-use way to optimize them.
You can quickly create and analyze single-cavity, multi-cavity, andfamily mold layouts, including sprues, runners, and gates. You caneven balance runner systems and estimate cycle time, clamp tonnage,and shot size, enabling you to optimize feed system design and avoidcostly mold rework.
SOLIDWORKS Plastics Premiumo SOLIDWORKS Plastics Premium includes everything in
SOLIDWORKS Plastics Professional plus advanced simulationfunctionality that allows CAE analysts and mold designers to analyzemold cooling line layouts and predict molded part warpage. Users can
design and analyze simple or complex mold cooling line layouts,optimize cooling system design to minimize cycle times and decreasemanufacturing costs and optimize part and mold design, materialselection and processing parameters to reduce or eliminate molded
part warpage.
-
7/26/2019 Pelf Infotech Report
22/45
22
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Certificates:-
1.First Certified Advanced Analysis Provider(CAAP) acrossWestern India2.Certified Advanced Services Provider (CASP)3.Certified Training & Support Providers (CTSP)4.Technical Team with CSWST, CSWP, CCST & CPDME
certifications5.Awarded in the year 2007 for Best Account Mapping across
Defence & PSUs.6.Bestowed with Coveted CLUB 100% AWARD For
Outstanding Performance in Two Consecutive Fiscal Years-2010 & 2011 by Dassault Systemes SolidWorks Corp .U.S
7.Best VAR of the Year- 2011 across APAC with cent percentgrowth on YOY basis
8.Spearheaded & establised Virtual Knowledge sharing Platformnomenclated as SolidWorks Aficionados for the passionate
users of SolidWorks.9.Acting as a catalyst in fostering INDUSTRY-INSTITUTE-
INTERACTION (III)
-
7/26/2019 Pelf Infotech Report
23/45
23
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SWAT ANALYSIS FOR PELF INFOTECH PVT. LTD.
After a keen observation over the organization various aspects of PelfInfotech Pvt. Ltd. The following strength, weakness, opportunity, threats areknown.
STRENGTH
WEAKNESS
OPPORTUNITY
THREATS
-
7/26/2019 Pelf Infotech Report
24/45
24
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
OBJECTIVE OF THE STUDY
1. To identifying the companies using Designing software.2. To understand the usage of Product Data Management software across Industries.3. To find out their preferences for Product Data Management Software.
-
7/26/2019 Pelf Infotech Report
25/45
25
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
SCOPE OF THE STUDY
1. The study was limited to the area within Pune region.2. The study is done with the sample size of 143 companies.3. The study was carried out for only 60 days.
-
7/26/2019 Pelf Infotech Report
26/45
26
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
RESEARCH METHODOLOGY
-
7/26/2019 Pelf Infotech Report
27/45
27
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
MEANING OF RESEARCH
Research has been defined by various authors in different ways. It alwaysbegins with a question or a problem. Its purpose is to find answers toquestions through the application systematic and scientific methods. Thus,research is the systematic approach towards purposeful investigation. Thisneeds formulating a hypothesis, collection of data on relevant variables,analyzing and interpreting the results and reaching conclusion either in theform of solution or certain generalizations.
RESEARCH DESIGN
A research project conducted scientifically has a specific framework ofresearch from the problems identification to the presentation of the researchreport. This research framework is known as the research design. The studyundertaken is Descriptive in nature, as the objectives were clearly mentionedwhen the study was conducted. The design was so prepared that it fulfillingthe objectives of the study and there was minimization of bias andmaximization of reliability of evidence.
STEPSDefine the problem of the research
Develop the research plan
Collect the information
Analyze the information
-
7/26/2019 Pelf Infotech Report
28/45
28
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
DESCRIPTIVE RESEARCH
This method is undertaken when the research is interested in knowledge aboutthe characteristics of certain group such as age, educational level, and income,interested in knowing the proportion of unit a given population who behavedin a particular way, determining the relationship between two or morevariables. This method had proved to be one of the most suitable ones in thisresearch work.
PURPOSE OF RESEARCH
The objective of research is to find out answers to questions through theapplication of systematic and scientific way.
OBJECTIVES:
1. To identifying the companies using Designing software.2. To understand the usage of Product Data Management software across
Industries.3. To find out their preferences for Product Data Management Software.
SCOPE OF THE PROJECT:
As the study is about the Preference for Enterprise Product Data ManagementSoftware in select Industrial Area that are the major factors that decidecompanys success, so knowing a good deal about it is of much importance.
The company can trace the loopholes and take corrective measures which willhelp it improve further. The project has covered various marketing concepts
and the models that fit into the business model. This project can be used toidentify the gap between the companys offering and the customers
expectations. The scope is just not limited to the company; it gives an idea ofthe industry.
-
7/26/2019 Pelf Infotech Report
29/45
29
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
DATA COLLECTION
Once the research problem is formulated and the research design isdetermined, the next task is data collection. Data can be classified into twocategoriesPrimary and Secondary.
PRIMARY DATA
Primary data is one which is collected by the investigator himself for thepurpose of a specific inquiry or study. Such data is original in character and isgenerated by surveys conducted by individuals or research institutions.Primary data has been collected through following methods: Personal interview Telephonic interview
SECONDARY DATA
The secondary data on the other hand, are those which have already beencollected by someone else and which have already been passed through thestatistical process. The different methods for collecting the secondary dataare: Company (Pune Yellow Pages) Competitors Internet
QUESTIONNAIRE
A repetitive refining of points a qualitative & effective questionnaire wasevolved which included both closed & open ended questions. The researchwas carried out through surey method with the help of a questionnaire
consisting of closed & open ended question. Due to flexibility, questionnairemethod is ideally suited for collection of primary data.SAMPLING TECHNIQUES
Sampling methods are basically of two types viz., non-random sampling andrandom sampling as shown in figure below:
-
7/26/2019 Pelf Infotech Report
30/45
30
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
Methods of Sampling
Random sampling Non Random sampling
Random Stratified Cluster Multi- Stage AreaSampling Sampling Sampling Sampling Sampling
Judgement Quota Panel Convenience SnowballSampling Sampling Sampling Sampling Sampling
Convenience Sampling
It is a sampling method in which units are selected based on easyaccess/availability. Convenient sampling is a type of non-probabilitysampling which involves the sample being drawn from that part of the
population which is close to hand. For the successful accomplishment of thisresearch convenience sampling has been selected.
Sample Size
Number of Companies:- 144
Area of the study
The study was done in various regions in Pune. The regions covered wereRanjangaon, Sanaswadi, Wagholi, Shirur, Hadapsar, Ambegaon, Nahre,Pirangut, Katraj, Bhosri, and PCMC area.
-
7/26/2019 Pelf Infotech Report
31/45
31
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
This research is descriptive research done in and around Pune.
Primary data:o The primary data is the data collected for the first time and thus
happened to be of original character. Primary data include theinformation collected from the people through discussion. Thedata used for study is acquired and collected by havinginteraction with the people in Ranjangaon, Sanaswadi, Narhe,Pirangut, Bhosari, Pimpri-Chinchwad, Shivane and Hadapsarareas in Pune city.
Secondary data:
o The secondary data on the other hand are those which havealready been collected by someone else and which have already
been passed through the statistical processes. The information wegot from the websites of the Pelf InfoTech Pvt. Ltd.
Research Design:
o A research project conducted scientifically has a specificframework of research from the problem identification to the
presentation of the research report. This framework ofconducting research is known as research design.
o A research design is simply the framework or plan for a study
that is used as a guide in collecting & analyzing the data it is ablue print that is followed in completing study.
Sampling:
o Sampling is essential technique of behavioral research; theresearch work cant be undertaken without use of sampling. The
study of all people in Pune city is not possible & it is alsoimpracticable. The practical limitationcost, time & otherfactors which are usually operative in the situation, stand in theway of studying the people in Pune city.
Method:o A questionnaire is a method of obtaining specific information
about a defined problem so that the data, after analyzing &interpretation, results in a better appreciation of the problem. Aquestionnaire form which has to be completed by respondent, forthis project report I collect the answers of the questions throughsurvey method.
-
7/26/2019 Pelf Infotech Report
32/45
32
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
DATA ANALYSIS AND INTERPRETATION
-
7/26/2019 Pelf Infotech Report
33/45
33
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
1. Do you use any Product Data Management Solutions?
Yes No Other
Do you useany Product
DataManagement
Solutions
55 83 6
38%
58%
4%
Do you use any Product DataManagement Solutions
Yes No Other
-
7/26/2019 Pelf Infotech Report
34/45
34
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
2. Please choose the industry category that describe your company'sprimary line of business?
Aerospace & Defense 1
Alternate Energy 1
Automotive & Transportation, Industrial Machinery 7
Automotive and Transportation 8
Consumer Products 7
Design & Engineering Services, Industrial Machinery 38
Electronics 15
Heavy Engineering & Fabrication, IndustrialMachinery
21
Industrial Machinery 41
Packaging 2
Oil & Gas 2
Presicion 1
-
7/26/2019 Pelf Infotech Report
35/45
35
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
1% 1%
5%6%
5%
26%
10%
15%
28%
1%1% 1%
Chart Title
Aerospace & Defense
Alternate Energy
Automotive & Transportation, Industrial Machinery
Automotive and Transportation
Consumer Products
Design & Engineering Services, Industrial Machinery
Electronics
Heavy Engineering & Fabrication, Industrial Machinery
Industrial Machinery
Packaging
Oil & Gas
Presicion
-
7/26/2019 Pelf Infotech Report
36/45
36
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
3. Is your Company involved in designing activity?
Yes No
Is your Company involvedin designing activity
106 38
74%
26%
Is your Company involved in designing
activity
Yes No
-
7/26/2019 Pelf Infotech Report
37/45
37
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
4. If Yes, In which Type of designing?
If Yes, In which Type of designing?
Electrical 36
Mechanical 89
Both Mechanical and Electrical 19
25%
62%
13%
If Yes, In which Type of designing?
Electrical Mechanical Both Mechanical, Electrical
-
7/26/2019 Pelf Infotech Report
38/45
38
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
5. What is the size of your designing team?
What is the size of your
designing team
1 Designer 41
2 Designers 40
3 to 5 Designers 32
5 and above Designers 31
28%
28%
22%
22%
What is the size of your designing team
1 Designer 2 Designers 3 to 5 Designers 5 and above Designers
-
7/26/2019 Pelf Infotech Report
39/45
39
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
6. Do you face any problems for your existing software?
Yes No
Do you face any problems for your existingsoftware?
53 91
37%
63%
Do you face any problems for your
existing software?
Yes No
-
7/26/2019 Pelf Infotech Report
40/45
40
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
FINDINGS
1. I visited 200+ companies and found that about 74% of the Usedesigning software.
2. By observations it seems that from above 74% of companies thatProduct data management software is not used by many of thecompanies around Pune. There is only 38% companies useEPDM.
3. About 58% of the companies dontuse any Software for Datamanagement. They are managing their product data on local server orthe same device on which they are designing product.
4. Its also seen that 4% companies are not aware about the Enterprise
Product Data Management Software.
-
7/26/2019 Pelf Infotech Report
41/45
41
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
LIMITATIONS
Time ConstraintThere was time constraint to this project. The project was to becompleted within 2 months.
Area Limitations
The study was limited to Pune District or around the Pune city.Hence the findings may differ from other parts of India where Ihave not visited.
Limited sources of data collection
Sources of data for collection of secondary data were limited. Thestudy is based on the primary data collected during research.
Unavailability of official data
Due to Companies norms and regulation some of the official dataabout the current software they using and number of employees
working in design team couldnt be made available. The figuresgiven are approximate figures.
Non-Respondent error
It is almost impossible to obtain data from each and everyrespondent covered in sample. There are always some respondentswho refuse to give information.
Busy respondentsMany times respondents were so busy that they didnt reply. Therewere biased replies also. As I was not given any identity proof bycompany some of the respondents didnt entertain me as they asked
to show identity proof.
-
7/26/2019 Pelf Infotech Report
42/45
42
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
RECOMMENDATIONS
-
7/26/2019 Pelf Infotech Report
43/45
43
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
CONCLUSIONS
-
7/26/2019 Pelf Infotech Report
44/45
44
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
BIBLIOGRAPHY
-
7/26/2019 Pelf Infotech Report
45/45
BRACTs
Vishwakarma Institute of Management(An ISO 9001-2008 Certified Institute)
(Approved by AICTE-New Delhi, Recognized by Government of Maharashtra and Permanently Affiliated to University of Pune)
MBAProgrammeRated as MH-A by CRISIL
Recipient of the 19thDewang Mehta B School Award for the Best B School with Academic Inputs in Marketing
Rewarded as Second Best Professional Institute in Urban Area Category by the University of Pune
APPENDIX
top related